1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * Copyright (C) 2016 PHYTEC Messtechnik GmbH
  4 * Author: Christian Hemp <c.hemp@phytec.de>
  5 */
  6
  7#include <dt-bindings/gpio/gpio.h>
  8#include <dt-bindings/interrupt-controller/irq.h>
  9#include <dt-bindings/pwm/pwm.h>
 10
 11/ {
 12	model = "PHYTEC phyCORE-i.MX6 UltraLite";
 13	compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
 14
 15	chosen {
 16		stdout-path = &uart1;
 17	};
 18
 19	/*
 20	 * Set the minimum memory size here and
 21	 * let the bootloader set the real size.
 22	 */
 23	memory@80000000 {
 24		device_type = "memory";
 25		reg = <0x80000000 0x8000000>;
 26	};
 27
 28	gpio_leds_som: leds {
 29		pinctrl-names = "default";
 30		pinctrl-0 = <&pinctrl_gpioleds_som>;
 31		compatible = "gpio-leds";
 32
 33		phycore-green {
 34			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 35			linux,default-trigger = "heartbeat";
 36		};
 37	};
 38};
 39
 40&fec1 {
 41	pinctrl-names = "default";
 42	pinctrl-0 = <&pinctrl_enet1>;
 43	phy-mode = "rmii";
 44	phy-handle = <&ethphy1>;
 45	status = "disabled";
 46
 47	mdio: mdio {
 48		#address-cells = <1>;
 49		#size-cells = <0>;
 50
 51		ethphy1: ethernet-phy@1 {
 52			reg = <1>;
 53			interrupt-parent = <&gpio1>;
 54			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 55			micrel,led-mode = <1>;
 56			clocks = <&clks IMX6UL_CLK_ENET_REF>;
 57			clock-names = "rmii-ref";
 58			status = "disabled";
 59		};
 60	};
 61};
 62
 63&gpmi {
 64	pinctrl-names = "default";
 65	pinctrl-0 = <&pinctrl_gpmi_nand>;
 66	nand-on-flash-bbt;
 67	status = "disabled";
 68};
 69
 70&i2c1 {
 71	pinctrl-names = "default", "gpio";
 72	pinctrl-0 = <&pinctrl_i2c1>;
 73	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 74	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 75	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 76	clock-frequency = <100000>;
 77	status = "okay";
 78
 79	eeprom@52 {
 80		compatible = "catalyst,24c32", "atmel,24c32";
 81		pagesize = <32>;
 82		reg = <0x52>;
 83	};
 84};
 85
 86&snvs_poweroff {
 87	status = "okay";
 88};
 89
 90&uart1 {
 91	pinctrl-names = "default";
 92	pinctrl-0 = <&pinctrl_uart1>;
 93	status = "okay";
 94};
 95
 96&usdhc2 {
 97	pinctrl-names = "default";
 98	pinctrl-0 = <&pinctrl_usdhc2>;
 99	bus-width = <8>;
100	no-1-8-v;
101	non-removable;
102	status = "disabled";
103};
104
105&wdog1 {
106	fsl,suspend-in-wait;
107};
108
109&iomuxc {
110	pinctrl_enet1: enet1grp {
111		fsl,pins = <
112			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x10010
113			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x10010
114			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
115			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
116			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
117			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
118			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
119			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
120			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
121			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
122			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x17059
123		>;
124	};
125
126	pinctrl_gpioleds_som: gpioledssomgrp {
127		fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0>;
128	};
129
130	pinctrl_gpmi_nand: gpminandgrp {
131		fsl,pins = <
132			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
133			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
134			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
135			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
136			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
137			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
138			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
139			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
140			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
141			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
142			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
143			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
144			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
145			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
146			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
147		>;
148	};
149
150	pinctrl_i2c1: i2cgrp {
151		fsl,pins = <
152			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
153			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
154		>;
155	};
156
157	pinctrl_i2c1_gpio: i2cgpiogrp {
158		fsl,pins = <
159			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x4001b8b0
160			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x4001b8b0
161		>;
162	};
163
164	pinctrl_uart1: uart1grp {
165		fsl,pins = <
166			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
167			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
168		>;
169	};
170
171	pinctrl_usdhc2: usdhc2grp {
172		fsl,pins = <
173			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
174			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
175			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
176			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
177			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
178			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
179			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
180			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
181			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
182			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
183		>;
184	};
185
186};