1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  2/*
  3 * Copyright (c) 2021 Protonic Holland
  4 */
  5
  6/ {
  7	gpio-keys {
  8		compatible = "gpio-keys";
  9		pinctrl-names = "default";
 10		pinctrl-0 = <&pinctrl_gpiokeys>;
 11		autorepeat;
 12
 13		power {
 14			label = "Power Button";
 15			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 16			linux,code = <KEY_POWER>;
 17			wakeup-source;
 18		};
 19	};
 20
 21	panel {
 22		compatible = "kyo,tcg121xglp";
 23		backlight = <&backlight_lcd>;
 24		power-supply = <&reg_3v3>;
 25
 26		port {
 27			panel_in: endpoint {
 28				remote-endpoint = <&lvds0_out>;
 29			};
 30		};
 31	};
 32};
 33
 34&fec {
 35	pinctrl-names = "default";
 36	pinctrl-0 = <&pinctrl_enet>;
 37	phy-mode = "rgmii-id";
 38	phy-handle = <&rgmii_phy>;
 39	status = "okay";
 40
 41	mdio {
 42		#address-cells = <1>;
 43		#size-cells = <0>;
 44
 45		/* Microchip KSZ9031RNX PHY */
 46		rgmii_phy: ethernet-phy@0 {
 47			reg = <0>;
 48			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
 49			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 50			reset-assert-us = <10000>;
 51			reset-deassert-us = <300>;
 52		};
 53	};
 54};
 55
 56&gpio1 {
 57	gpio-line-names =
 58		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
 59			"CAM2_MIRROR", "", "", "SMBALERT",
 60		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
 61		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
 62			"SD1_DATA3", "ETH_MDIO", "",
 63		"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
 64};
 65
 66&gpio4 {
 67	gpio-line-names =
 68		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
 69		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
 70			"CAN2_SR", "CAN2_TX", "CAN2_RX",
 71		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
 72			"HITCH_IN_OUT",
 73		"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
 74			"ISB_LED";
 75};
 76
 77&gpio5 {
 78	gpio-line-names =
 79		"", "", "", "", "", "", "", "",
 80		"", "", "", "", "", "", "", "",
 81		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
 82			"I2S_BITCLK", "I2S_DOUT",
 83		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
 84			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
 85};
 86
 87&gpio6 {
 88	gpio-line-names =
 89		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
 90			"ITU656_D6", "ITU656_D7", "", "",
 91		"", "", "", "", "", "", "", "",
 92		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
 93			"RGMII_TD3",
 94		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
 95			"RGMII_RD2", "RGMII_RD3", "", "";
 96};
 97
 98&iomuxc {
 99	pinctrl_enet: enetgrp {
100		fsl,pins = <
101			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
102			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
103			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
104			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
105			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
106			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030
107			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030
108			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030
109			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030
110			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030
111			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030
112			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030
113			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030
114			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030
115			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030
116			/* Phy reset */
117			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0
118			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1
119		>;
120	};
121
122	pinctrl_gpiokeys: gpiokeygrp {
123		fsl,pins = <
124			/* nON_SWITCH */
125			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
126		>;
127	};
128};