Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung's Exynos4412 based Trats 2 board device tree source
4 *
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 *
8 * Device tree source file for Samsung's Trats 2 board which is based on
9 * Samsung's Exynos4412 SoC.
10 */
11
12/dts-v1/;
13#include "exynos4412-galaxy-s3.dtsi"
14
15/ {
16 model = "Samsung Trats 2 based on Exynos4412";
17 compatible = "samsung,trats2", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
18 chassis-type = "handset";
19
20 memory@40000000 {
21 device_type = "memory";
22 reg = <0x40000000 0x40000000>;
23 };
24
25 chosen {
26 bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
27 stdout-path = "serial2:115200n8";
28 };
29};
1/*
2 * Samsung's Exynos4412 based Trats 2 board device tree source
3 *
4 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
6 *
7 * Device tree source file for Samsung's Trats 2 board which is based on
8 * Samsung's Exynos4412 SoC.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13*/
14
15/dts-v1/;
16#include "exynos4412.dtsi"
17#include "exynos4412-ppmu-common.dtsi"
18#include <dt-bindings/gpio/gpio.h>
19#include <dt-bindings/interrupt-controller/irq.h>
20#include <dt-bindings/clock/maxim,max77686.h>
21
22/ {
23 model = "Samsung Trats 2 based on Exynos4412";
24 compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
25
26 aliases {
27 i2c9 = &i2c_ak8975;
28 i2c10 = &i2c_cm36651;
29 i2c11 = &i2c_max77693;
30 i2c12 = &i2c_max77693_fuel;
31 };
32
33 memory@40000000 {
34 device_type = "memory";
35 reg = <0x40000000 0x40000000>;
36 };
37
38 chosen {
39 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
40 stdout-path = &serial_2;
41 };
42
43 firmware@0204F000 {
44 compatible = "samsung,secure-firmware";
45 reg = <0x0204F000 0x1000>;
46 };
47
48 fixed-rate-clocks {
49 xxti {
50 compatible = "samsung,clock-xxti", "fixed-clock";
51 clock-frequency = <0>;
52 };
53
54 xusbxti {
55 compatible = "samsung,clock-xusbxti", "fixed-clock";
56 clock-frequency = <24000000>;
57 };
58 };
59
60 regulators {
61 compatible = "simple-bus";
62 #address-cells = <1>;
63 #size-cells = <0>;
64
65 cam_io_reg: voltage-regulator-1 {
66 compatible = "regulator-fixed";
67 regulator-name = "CAM_SENSOR_A";
68 regulator-min-microvolt = <2800000>;
69 regulator-max-microvolt = <2800000>;
70 gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
71 enable-active-high;
72 };
73
74 lcd_vdd3_reg: voltage-regulator-2 {
75 compatible = "regulator-fixed";
76 regulator-name = "LCD_VDD_2.2V";
77 regulator-min-microvolt = <2200000>;
78 regulator-max-microvolt = <2200000>;
79 gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
80 enable-active-high;
81 };
82
83 cam_af_reg: voltage-regulator-3 {
84 compatible = "regulator-fixed";
85 regulator-name = "CAM_AF";
86 regulator-min-microvolt = <2800000>;
87 regulator-max-microvolt = <2800000>;
88 gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
89 enable-active-high;
90 };
91
92 ps_als_reg: voltage-regulator-5 {
93 compatible = "regulator-fixed";
94 regulator-name = "LED_A_3.0V";
95 regulator-min-microvolt = <3000000>;
96 regulator-max-microvolt = <3000000>;
97 gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
98 enable-active-high;
99 };
100 };
101
102 gpio-keys {
103 compatible = "gpio-keys";
104
105 key-down {
106 gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
107 linux,code = <114>;
108 label = "volume down";
109 debounce-interval = <10>;
110 };
111
112 key-up {
113 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
114 linux,code = <115>;
115 label = "volume up";
116 debounce-interval = <10>;
117 };
118
119 key-power {
120 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
121 linux,code = <116>;
122 label = "power";
123 debounce-interval = <10>;
124 wakeup-source;
125 };
126
127 key-ok {
128 gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
129 linux,code = <139>;
130 label = "ok";
131 debounce-inteval = <10>;
132 wakeup-source;
133 };
134 };
135
136 i2c_max77693: i2c-gpio-1 {
137 compatible = "i2c-gpio";
138 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
139 i2c-gpio,delay-us = <2>;
140 #address-cells = <1>;
141 #size-cells = <0>;
142 status = "okay";
143
144 max77693@66 {
145 compatible = "maxim,max77693";
146 interrupt-parent = <&gpx1>;
147 interrupts = <5 2>;
148 reg = <0x66>;
149
150 regulators {
151 esafeout1_reg: ESAFEOUT1 {
152 regulator-name = "ESAFEOUT1";
153 };
154 esafeout2_reg: ESAFEOUT2 {
155 regulator-name = "ESAFEOUT2";
156 };
157 charger_reg: CHARGER {
158 regulator-name = "CHARGER";
159 regulator-min-microamp = <60000>;
160 regulator-max-microamp = <2580000>;
161 };
162 };
163
164 max77693_haptic {
165 compatible = "maxim,max77693-haptic";
166 haptic-supply = <&ldo26_reg>;
167 pwms = <&pwm 0 38022 0>;
168 };
169
170 charger {
171 compatible = "maxim,max77693-charger";
172
173 maxim,constant-microvolt = <4350000>;
174 maxim,min-system-microvolt = <3600000>;
175 maxim,thermal-regulation-celsius = <100>;
176 maxim,battery-overcurrent-microamp = <3500000>;
177 maxim,charge-input-threshold-microvolt = <4300000>;
178 };
179 };
180 };
181
182 i2c_max77693_fuel: i2c-gpio-3 {
183 compatible = "i2c-gpio";
184 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
185 i2c-gpio,delay-us = <2>;
186 #address-cells = <1>;
187 #size-cells = <0>;
188 status = "okay";
189
190 max77693-fuel-gauge@36 {
191 compatible = "maxim,max17047";
192 interrupt-parent = <&gpx2>;
193 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
194 reg = <0x36>;
195
196 maxim,over-heat-temp = <700>;
197 maxim,over-volt = <4500>;
198 };
199 };
200
201 i2c_ak8975: i2c-gpio-0 {
202 compatible = "i2c-gpio";
203 gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
204 i2c-gpio,delay-us = <2>;
205 #address-cells = <1>;
206 #size-cells = <0>;
207 status = "okay";
208
209 ak8975@0c {
210 compatible = "asahi-kasei,ak8975";
211 reg = <0x0c>;
212 gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
213 };
214 };
215
216 i2c_cm36651: i2c-gpio-2 {
217 compatible = "i2c-gpio";
218 gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
219 i2c-gpio,delay-us = <2>;
220 #address-cells = <1>;
221 #size-cells = <0>;
222
223 cm36651@18 {
224 compatible = "capella,cm36651";
225 reg = <0x18>;
226 interrupt-parent = <&gpx0>;
227 interrupts = <2 2>;
228 vled-supply = <&ps_als_reg>;
229 };
230 };
231
232 camera: camera {
233 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
234 pinctrl-names = "default";
235 status = "okay";
236 assigned-clocks = <&clock CLK_MOUT_CAM0>,
237 <&clock CLK_MOUT_CAM1>;
238 assigned-clock-parents = <&clock CLK_XUSBXTI>,
239 <&clock CLK_XUSBXTI>;
240
241
242 };
243
244 sound {
245 compatible = "samsung,trats2-audio";
246 samsung,i2s-controller = <&i2s0>;
247 samsung,model = "Trats2";
248 samsung,audio-codec = <&wm1811>;
249 samsung,audio-routing =
250 "SPK", "SPKOUTLN",
251 "SPK", "SPKOUTLP",
252 "SPK", "SPKOUTRN",
253 "SPK", "SPKOUTRP";
254 };
255
256 thermistor-ap {
257 compatible = "murata,ncp15wb473";
258 pullup-uv = <1800000>; /* VCC_1.8V_AP */
259 pullup-ohm = <100000>; /* 100K */
260 pulldown-ohm = <100000>; /* 100K */
261 io-channels = <&adc 1>; /* AP temperature */
262 };
263
264 thermistor-battery {
265 compatible = "murata,ncp15wb473";
266 pullup-uv = <1800000>; /* VCC_1.8V_AP */
267 pullup-ohm = <100000>; /* 100K */
268 pulldown-ohm = <100000>; /* 100K */
269 io-channels = <&adc 2>; /* Battery temperature */
270 };
271
272 thermal-zones {
273 cpu_thermal: cpu-thermal {
274 cooling-maps {
275 map0 {
276 /* Corresponds to 800MHz at freq_table */
277 cooling-device = <&cpu0 7 7>;
278 };
279 map1 {
280 /* Corresponds to 200MHz at freq_table */
281 cooling-device = <&cpu0 13 13>;
282 };
283 };
284 };
285 };
286};
287
288&adc {
289 vdd-supply = <&ldo3_reg>;
290 status = "okay";
291};
292
293&bus_dmc {
294 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
295 vdd-supply = <&buck1_reg>;
296 status = "okay";
297};
298
299&bus_acp {
300 devfreq = <&bus_dmc>;
301 status = "okay";
302};
303
304&bus_c2c {
305 devfreq = <&bus_dmc>;
306 status = "okay";
307};
308
309&bus_leftbus {
310 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
311 vdd-supply = <&buck3_reg>;
312 status = "okay";
313};
314
315&bus_rightbus {
316 devfreq = <&bus_leftbus>;
317 status = "okay";
318};
319
320&bus_display {
321 devfreq = <&bus_leftbus>;
322 status = "okay";
323};
324
325&bus_fsys {
326 devfreq = <&bus_leftbus>;
327 status = "okay";
328};
329
330&bus_peri {
331 devfreq = <&bus_leftbus>;
332 status = "okay";
333};
334
335&bus_mfc {
336 devfreq = <&bus_leftbus>;
337 status = "okay";
338};
339
340&cpu0 {
341 cpu0-supply = <&buck2_reg>;
342};
343
344&csis_0 {
345 status = "okay";
346 vddcore-supply = <&ldo8_reg>;
347 vddio-supply = <&ldo10_reg>;
348 assigned-clocks = <&clock CLK_MOUT_CSIS0>,
349 <&clock CLK_SCLK_CSIS0>;
350 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
351 assigned-clock-rates = <0>, <176000000>;
352
353 /* Camera C (3) MIPI CSI-2 (CSIS0) */
354 port@3 {
355 reg = <3>;
356 csis0_ep: endpoint {
357 remote-endpoint = <&s5c73m3_ep>;
358 data-lanes = <1 2 3 4>;
359 samsung,csis-hs-settle = <12>;
360 };
361 };
362};
363
364&csis_1 {
365 status = "okay";
366 vddcore-supply = <&ldo8_reg>;
367 vddio-supply = <&ldo10_reg>;
368 assigned-clocks = <&clock CLK_MOUT_CSIS1>,
369 <&clock CLK_SCLK_CSIS1>;
370 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
371 assigned-clock-rates = <0>, <176000000>;
372
373 /* Camera D (4) MIPI CSI-2 (CSIS1) */
374 port@4 {
375 reg = <4>;
376 csis1_ep: endpoint {
377 remote-endpoint = <&is_s5k6a3_ep>;
378 data-lanes = <1>;
379 samsung,csis-hs-settle = <18>;
380 samsung,csis-wclk;
381 };
382 };
383};
384
385&dsi_0 {
386 vddcore-supply = <&ldo8_reg>;
387 vddio-supply = <&ldo10_reg>;
388 samsung,pll-clock-frequency = <24000000>;
389 status = "okay";
390
391 ports {
392 #address-cells = <1>;
393 #size-cells = <0>;
394
395 port@1 {
396 reg = <1>;
397
398 dsi_out: endpoint {
399 remote-endpoint = <&dsi_in>;
400 samsung,burst-clock-frequency = <500000000>;
401 samsung,esc-clock-frequency = <20000000>;
402 };
403 };
404 };
405
406 panel@0 {
407 compatible = "samsung,s6e8aa0";
408 reg = <0>;
409 vdd3-supply = <&lcd_vdd3_reg>;
410 vci-supply = <&ldo25_reg>;
411 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
412 power-on-delay= <50>;
413 reset-delay = <100>;
414 init-delay = <100>;
415 flip-horizontal;
416 flip-vertical;
417 panel-width-mm = <58>;
418 panel-height-mm = <103>;
419
420 display-timings {
421 timing-0 {
422 clock-frequency = <57153600>;
423 hactive = <720>;
424 vactive = <1280>;
425 hfront-porch = <5>;
426 hback-porch = <5>;
427 hsync-len = <5>;
428 vfront-porch = <13>;
429 vback-porch = <1>;
430 vsync-len = <2>;
431 };
432 };
433
434 port {
435 dsi_in: endpoint {
436 remote-endpoint = <&dsi_out>;
437 };
438 };
439 };
440};
441
442&exynos_usbphy {
443 vbus-supply = <&esafeout1_reg>;
444 status = "okay";
445};
446
447&fimc_0 {
448 status = "okay";
449 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
450 <&clock CLK_SCLK_FIMC0>;
451 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
452 assigned-clock-rates = <0>, <176000000>;
453};
454
455&fimc_1 {
456 status = "okay";
457 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
458 <&clock CLK_SCLK_FIMC1>;
459 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
460 assigned-clock-rates = <0>, <176000000>;
461};
462
463&fimc_2 {
464 status = "okay";
465 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
466 <&clock CLK_SCLK_FIMC2>;
467 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
468 assigned-clock-rates = <0>, <176000000>;
469};
470
471&fimc_3 {
472 status = "okay";
473 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
474 <&clock CLK_SCLK_FIMC3>;
475 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
476 assigned-clock-rates = <0>, <176000000>;
477};
478
479&fimc_is {
480 pinctrl-0 = <&fimc_is_uart>;
481 pinctrl-names = "default";
482 status = "okay";
483
484 i2c1_isp: i2c-isp@12140000 {
485 pinctrl-0 = <&fimc_is_i2c1>;
486 pinctrl-names = "default";
487
488 s5k6a3@10 {
489 compatible = "samsung,s5k6a3";
490 reg = <0x10>;
491 svdda-supply = <&cam_io_reg>;
492 svddio-supply = <&ldo19_reg>;
493 afvdd-supply = <&ldo19_reg>;
494 clock-frequency = <24000000>;
495 /* CAM_B_CLKOUT */
496 clocks = <&camera 1>;
497 clock-names = "extclk";
498 samsung,camclk-out = <1>;
499 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
500
501 port {
502 is_s5k6a3_ep: endpoint {
503 remote-endpoint = <&csis1_ep>;
504 data-lanes = <1>;
505 };
506 };
507 };
508 };
509};
510
511&fimc_lite_0 {
512 status = "okay";
513};
514
515&fimc_lite_1 {
516 status = "okay";
517};
518
519&fimd {
520 status = "okay";
521};
522
523&hsotg {
524 vusb_d-supply = <&ldo15_reg>;
525 vusb_a-supply = <&ldo12_reg>;
526 dr_mode = "peripheral";
527 status = "okay";
528};
529
530&i2c_0 {
531 samsung,i2c-sda-delay = <100>;
532 samsung,i2c-slave-addr = <0x10>;
533 samsung,i2c-max-bus-freq = <400000>;
534 pinctrl-0 = <&i2c0_bus>;
535 pinctrl-names = "default";
536 status = "okay";
537
538 s5c73m3@3c {
539 compatible = "samsung,s5c73m3";
540 reg = <0x3c>;
541 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */
542 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
543 vdd-int-supply = <&buck9_reg>;
544 vddio-cis-supply = <&ldo9_reg>;
545 vdda-supply = <&ldo17_reg>;
546 vddio-host-supply = <&ldo18_reg>;
547 vdd-af-supply = <&cam_af_reg>;
548 vdd-reg-supply = <&cam_io_reg>;
549 clock-frequency = <24000000>;
550 /* CAM_A_CLKOUT */
551 clocks = <&camera 0>;
552 clock-names = "cis_extclk";
553 port {
554 s5c73m3_ep: endpoint {
555 remote-endpoint = <&csis0_ep>;
556 data-lanes = <1 2 3 4>;
557 };
558 };
559 };
560};
561
562&i2c_3 {
563 samsung,i2c-sda-delay = <100>;
564 samsung,i2c-slave-addr = <0x10>;
565 samsung,i2c-max-bus-freq = <400000>;
566 pinctrl-0 = <&i2c3_bus>;
567 pinctrl-names = "default";
568 status = "okay";
569
570 mms114-touchscreen@48 {
571 compatible = "melfas,mms114";
572 reg = <0x48>;
573 interrupt-parent = <&gpm2>;
574 interrupts = <3 2>;
575 x-size = <720>;
576 y-size = <1280>;
577 avdd-supply = <&ldo23_reg>;
578 vdd-supply = <&ldo24_reg>;
579 };
580};
581
582&i2c_4 {
583 samsung,i2c-sda-delay = <100>;
584 samsung,i2c-slave-addr = <0x10>;
585 samsung,i2c-max-bus-freq = <100000>;
586 pinctrl-0 = <&i2c4_bus>;
587 pinctrl-names = "default";
588 status = "okay";
589
590 wm1811: wm1811@1a {
591 compatible = "wlf,wm1811";
592 reg = <0x1a>;
593 clocks = <&pmu_system_controller 0>;
594 clock-names = "MCLK1";
595 DCVDD-supply = <&ldo3_reg>;
596 DBVDD1-supply = <&ldo3_reg>;
597 wlf,ldo1ena = <&gpj0 4 0>;
598 };
599};
600
601&i2c_7 {
602 samsung,i2c-sda-delay = <100>;
603 samsung,i2c-slave-addr = <0x10>;
604 samsung,i2c-max-bus-freq = <100000>;
605 pinctrl-0 = <&i2c7_bus>;
606 pinctrl-names = "default";
607 status = "okay";
608
609 max77686: max77686_pmic@09 {
610 compatible = "maxim,max77686";
611 interrupt-parent = <&gpx0>;
612 interrupts = <7 0>;
613 reg = <0x09>;
614 #clock-cells = <1>;
615
616 voltage-regulators {
617 ldo1_reg: LDO1 {
618 regulator-name = "VALIVE_1.0V_AP";
619 regulator-min-microvolt = <1000000>;
620 regulator-max-microvolt = <1000000>;
621 regulator-always-on;
622 };
623
624 ldo2_reg: LDO2 {
625 regulator-name = "VM1M2_1.2V_AP";
626 regulator-min-microvolt = <1200000>;
627 regulator-max-microvolt = <1200000>;
628 regulator-always-on;
629 regulator-state-mem {
630 regulator-on-in-suspend;
631 };
632 };
633
634 ldo3_reg: LDO3 {
635 regulator-name = "VCC_1.8V_AP";
636 regulator-min-microvolt = <1800000>;
637 regulator-max-microvolt = <1800000>;
638 regulator-always-on;
639 };
640
641 ldo4_reg: LDO4 {
642 regulator-name = "VCC_2.8V_AP";
643 regulator-min-microvolt = <2800000>;
644 regulator-max-microvolt = <2800000>;
645 regulator-always-on;
646 };
647
648 ldo5_reg: LDO5 {
649 regulator-name = "VCC_1.8V_IO";
650 regulator-min-microvolt = <1800000>;
651 regulator-max-microvolt = <1800000>;
652 regulator-always-on;
653 };
654
655 ldo6_reg: LDO6 {
656 regulator-name = "VMPLL_1.0V_AP";
657 regulator-min-microvolt = <1000000>;
658 regulator-max-microvolt = <1000000>;
659 regulator-always-on;
660 regulator-state-mem {
661 regulator-on-in-suspend;
662 };
663 };
664
665 ldo7_reg: LDO7 {
666 regulator-name = "VPLL_1.0V_AP";
667 regulator-min-microvolt = <1000000>;
668 regulator-max-microvolt = <1000000>;
669 regulator-always-on;
670 regulator-state-mem {
671 regulator-on-in-suspend;
672 };
673 };
674
675 ldo8_reg: LDO8 {
676 regulator-name = "VMIPI_1.0V";
677 regulator-min-microvolt = <1000000>;
678 regulator-max-microvolt = <1000000>;
679 regulator-state-mem {
680 regulator-off-in-suspend;
681 };
682 };
683
684 ldo9_reg: LDO9 {
685 regulator-name = "CAM_ISP_MIPI_1.2V";
686 regulator-min-microvolt = <1200000>;
687 regulator-max-microvolt = <1200000>;
688 };
689
690 ldo10_reg: LDO10 {
691 regulator-name = "VMIPI_1.8V";
692 regulator-min-microvolt = <1800000>;
693 regulator-max-microvolt = <1800000>;
694 regulator-state-mem {
695 regulator-off-in-suspend;
696 };
697 };
698
699 ldo11_reg: LDO11 {
700 regulator-name = "VABB1_1.95V";
701 regulator-min-microvolt = <1950000>;
702 regulator-max-microvolt = <1950000>;
703 regulator-always-on;
704 regulator-state-mem {
705 regulator-off-in-suspend;
706 };
707 };
708
709 ldo12_reg: LDO12 {
710 regulator-name = "VUOTG_3.0V";
711 regulator-min-microvolt = <3000000>;
712 regulator-max-microvolt = <3000000>;
713 regulator-state-mem {
714 regulator-off-in-suspend;
715 };
716 };
717
718 ldo13_reg: LDO13 {
719 regulator-name = "NFC_AVDD_1.8V";
720 regulator-min-microvolt = <1800000>;
721 regulator-max-microvolt = <1800000>;
722 };
723
724 ldo14_reg: LDO14 {
725 regulator-name = "VABB2_1.95V";
726 regulator-min-microvolt = <1950000>;
727 regulator-max-microvolt = <1950000>;
728 regulator-always-on;
729 regulator-state-mem {
730 regulator-off-in-suspend;
731 };
732 };
733
734 ldo15_reg: LDO15 {
735 regulator-name = "VHSIC_1.0V";
736 regulator-min-microvolt = <1000000>;
737 regulator-max-microvolt = <1000000>;
738 regulator-state-mem {
739 regulator-on-in-suspend;
740 };
741 };
742
743 ldo16_reg: LDO16 {
744 regulator-name = "VHSIC_1.8V";
745 regulator-min-microvolt = <1800000>;
746 regulator-max-microvolt = <1800000>;
747 regulator-state-mem {
748 regulator-on-in-suspend;
749 };
750 };
751
752 ldo17_reg: LDO17 {
753 regulator-name = "CAM_SENSOR_CORE_1.2V";
754 regulator-min-microvolt = <1200000>;
755 regulator-max-microvolt = <1200000>;
756 };
757
758 ldo18_reg: LDO18 {
759 regulator-name = "CAM_ISP_SEN_IO_1.8V";
760 regulator-min-microvolt = <1800000>;
761 regulator-max-microvolt = <1800000>;
762 };
763
764 ldo19_reg: LDO19 {
765 regulator-name = "VT_CAM_1.8V";
766 regulator-min-microvolt = <1800000>;
767 regulator-max-microvolt = <1800000>;
768 };
769
770 ldo20_reg: LDO20 {
771 regulator-name = "VDDQ_PRE_1.8V";
772 regulator-min-microvolt = <1800000>;
773 regulator-max-microvolt = <1800000>;
774 };
775
776 ldo21_reg: LDO21 {
777 regulator-name = "VTF_2.8V";
778 regulator-min-microvolt = <2800000>;
779 regulator-max-microvolt = <2800000>;
780 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
781 };
782
783 ldo22_reg: LDO22 {
784 regulator-name = "VMEM_VDD_2.8V";
785 regulator-min-microvolt = <2800000>;
786 regulator-max-microvolt = <2800000>;
787 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
788 };
789
790 ldo23_reg: LDO23 {
791 regulator-name = "TSP_AVDD_3.3V";
792 regulator-min-microvolt = <3300000>;
793 regulator-max-microvolt = <3300000>;
794 };
795
796 ldo24_reg: LDO24 {
797 regulator-name = "TSP_VDD_1.8V";
798 regulator-min-microvolt = <1800000>;
799 regulator-max-microvolt = <1800000>;
800 };
801
802 ldo25_reg: LDO25 {
803 regulator-name = "LCD_VCC_3.3V";
804 regulator-min-microvolt = <2800000>;
805 regulator-max-microvolt = <2800000>;
806 };
807
808 ldo26_reg: LDO26 {
809 regulator-name = "MOTOR_VCC_3.0V";
810 regulator-min-microvolt = <3000000>;
811 regulator-max-microvolt = <3000000>;
812 };
813
814 buck1_reg: BUCK1 {
815 regulator-name = "vdd_mif";
816 regulator-min-microvolt = <850000>;
817 regulator-max-microvolt = <1100000>;
818 regulator-always-on;
819 regulator-boot-on;
820 regulator-state-mem {
821 regulator-off-in-suspend;
822 };
823 };
824
825 buck2_reg: BUCK2 {
826 regulator-name = "vdd_arm";
827 regulator-min-microvolt = <850000>;
828 regulator-max-microvolt = <1500000>;
829 regulator-always-on;
830 regulator-boot-on;
831 regulator-state-mem {
832 regulator-on-in-suspend;
833 };
834 };
835
836 buck3_reg: BUCK3 {
837 regulator-name = "vdd_int";
838 regulator-min-microvolt = <850000>;
839 regulator-max-microvolt = <1150000>;
840 regulator-always-on;
841 regulator-boot-on;
842 regulator-state-mem {
843 regulator-off-in-suspend;
844 };
845 };
846
847 buck4_reg: BUCK4 {
848 regulator-name = "vdd_g3d";
849 regulator-min-microvolt = <850000>;
850 regulator-max-microvolt = <1150000>;
851 regulator-boot-on;
852 regulator-state-mem {
853 regulator-off-in-suspend;
854 };
855 };
856
857 buck5_reg: BUCK5 {
858 regulator-name = "VMEM_1.2V_AP";
859 regulator-min-microvolt = <1200000>;
860 regulator-max-microvolt = <1200000>;
861 regulator-always-on;
862 };
863
864 buck6_reg: BUCK6 {
865 regulator-name = "VCC_SUB_1.35V";
866 regulator-min-microvolt = <1350000>;
867 regulator-max-microvolt = <1350000>;
868 regulator-always-on;
869 };
870
871 buck7_reg: BUCK7 {
872 regulator-name = "VCC_SUB_2.0V";
873 regulator-min-microvolt = <2000000>;
874 regulator-max-microvolt = <2000000>;
875 regulator-always-on;
876 };
877
878 buck8_reg: BUCK8 {
879 regulator-name = "VMEM_VDDF_3.0V";
880 regulator-min-microvolt = <2850000>;
881 regulator-max-microvolt = <2850000>;
882 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
883 };
884
885 buck9_reg: BUCK9 {
886 regulator-name = "CAM_ISP_CORE_1.2V";
887 regulator-min-microvolt = <1000000>;
888 regulator-max-microvolt = <1200000>;
889 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
890 };
891 };
892 };
893};
894
895&i2s0 {
896 pinctrl-0 = <&i2s0_bus>;
897 pinctrl-names = "default";
898 status = "okay";
899};
900
901&mshc_0 {
902 num-slots = <1>;
903 broken-cd;
904 non-removable;
905 card-detect-delay = <200>;
906 vmmc-supply = <&ldo22_reg>;
907 clock-frequency = <400000000>;
908 samsung,dw-mshc-ciu-div = <0>;
909 samsung,dw-mshc-sdr-timing = <2 3>;
910 samsung,dw-mshc-ddr-timing = <1 2>;
911 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
912 pinctrl-names = "default";
913 status = "okay";
914 bus-width = <8>;
915 cap-mmc-highspeed;
916};
917
918&pmu_system_controller {
919 assigned-clocks = <&pmu_system_controller 0>;
920 assigned-clock-parents = <&clock CLK_XUSBXTI>;
921};
922
923&pinctrl_0 {
924 pinctrl-names = "default";
925 pinctrl-0 = <&sleep0>;
926
927 sleep0: sleep-states {
928 PIN_SLP(gpa0-0, INPUT, NONE);
929 PIN_SLP(gpa0-1, OUT0, NONE);
930 PIN_SLP(gpa0-2, INPUT, NONE);
931 PIN_SLP(gpa0-3, INPUT, UP);
932 PIN_SLP(gpa0-4, INPUT, NONE);
933 PIN_SLP(gpa0-5, INPUT, DOWN);
934 PIN_SLP(gpa0-6, INPUT, DOWN);
935 PIN_SLP(gpa0-7, INPUT, UP);
936
937 PIN_SLP(gpa1-0, INPUT, DOWN);
938 PIN_SLP(gpa1-1, INPUT, DOWN);
939 PIN_SLP(gpa1-2, INPUT, DOWN);
940 PIN_SLP(gpa1-3, INPUT, DOWN);
941 PIN_SLP(gpa1-4, INPUT, DOWN);
942 PIN_SLP(gpa1-5, INPUT, DOWN);
943
944 PIN_SLP(gpb-0, INPUT, NONE);
945 PIN_SLP(gpb-1, INPUT, NONE);
946 PIN_SLP(gpb-2, INPUT, NONE);
947 PIN_SLP(gpb-3, INPUT, NONE);
948 PIN_SLP(gpb-4, INPUT, DOWN);
949 PIN_SLP(gpb-5, INPUT, UP);
950 PIN_SLP(gpb-6, INPUT, DOWN);
951 PIN_SLP(gpb-7, INPUT, DOWN);
952
953 PIN_SLP(gpc0-0, INPUT, DOWN);
954 PIN_SLP(gpc0-1, INPUT, DOWN);
955 PIN_SLP(gpc0-2, INPUT, DOWN);
956 PIN_SLP(gpc0-3, INPUT, DOWN);
957 PIN_SLP(gpc0-4, INPUT, DOWN);
958
959 PIN_SLP(gpc1-0, INPUT, NONE);
960 PIN_SLP(gpc1-1, PREV, NONE);
961 PIN_SLP(gpc1-2, INPUT, NONE);
962 PIN_SLP(gpc1-3, INPUT, NONE);
963 PIN_SLP(gpc1-4, INPUT, NONE);
964
965 PIN_SLP(gpd0-0, INPUT, DOWN);
966 PIN_SLP(gpd0-1, INPUT, DOWN);
967 PIN_SLP(gpd0-2, INPUT, NONE);
968 PIN_SLP(gpd0-3, INPUT, NONE);
969
970 PIN_SLP(gpd1-0, INPUT, DOWN);
971 PIN_SLP(gpd1-1, INPUT, DOWN);
972 PIN_SLP(gpd1-2, INPUT, NONE);
973 PIN_SLP(gpd1-3, INPUT, NONE);
974
975 PIN_SLP(gpf0-0, INPUT, NONE);
976 PIN_SLP(gpf0-1, INPUT, NONE);
977 PIN_SLP(gpf0-2, INPUT, DOWN);
978 PIN_SLP(gpf0-3, INPUT, DOWN);
979 PIN_SLP(gpf0-4, INPUT, NONE);
980 PIN_SLP(gpf0-5, INPUT, DOWN);
981 PIN_SLP(gpf0-6, INPUT, NONE);
982 PIN_SLP(gpf0-7, INPUT, DOWN);
983
984 PIN_SLP(gpf1-0, INPUT, DOWN);
985 PIN_SLP(gpf1-1, INPUT, DOWN);
986 PIN_SLP(gpf1-2, INPUT, DOWN);
987 PIN_SLP(gpf1-3, INPUT, DOWN);
988 PIN_SLP(gpf1-4, INPUT, NONE);
989 PIN_SLP(gpf1-5, INPUT, NONE);
990 PIN_SLP(gpf1-6, INPUT, DOWN);
991 PIN_SLP(gpf1-7, PREV, NONE);
992
993 PIN_SLP(gpf2-0, PREV, NONE);
994 PIN_SLP(gpf2-1, INPUT, DOWN);
995 PIN_SLP(gpf2-2, INPUT, DOWN);
996 PIN_SLP(gpf2-3, INPUT, DOWN);
997 PIN_SLP(gpf2-4, INPUT, DOWN);
998 PIN_SLP(gpf2-5, INPUT, DOWN);
999 PIN_SLP(gpf2-6, INPUT, NONE);
1000 PIN_SLP(gpf2-7, INPUT, NONE);
1001
1002 PIN_SLP(gpf3-0, INPUT, NONE);
1003 PIN_SLP(gpf3-1, PREV, NONE);
1004 PIN_SLP(gpf3-2, PREV, NONE);
1005 PIN_SLP(gpf3-3, PREV, NONE);
1006 PIN_SLP(gpf3-4, OUT1, NONE);
1007 PIN_SLP(gpf3-5, INPUT, DOWN);
1008
1009 PIN_SLP(gpj0-0, PREV, NONE);
1010 PIN_SLP(gpj0-1, PREV, NONE);
1011 PIN_SLP(gpj0-2, PREV, NONE);
1012 PIN_SLP(gpj0-3, INPUT, DOWN);
1013 PIN_SLP(gpj0-4, PREV, NONE);
1014 PIN_SLP(gpj0-5, PREV, NONE);
1015 PIN_SLP(gpj0-6, INPUT, DOWN);
1016 PIN_SLP(gpj0-7, INPUT, DOWN);
1017
1018 PIN_SLP(gpj1-0, INPUT, DOWN);
1019 PIN_SLP(gpj1-1, PREV, NONE);
1020 PIN_SLP(gpj1-2, PREV, NONE);
1021 PIN_SLP(gpj1-3, INPUT, DOWN);
1022 PIN_SLP(gpj1-4, INPUT, DOWN);
1023 };
1024};
1025
1026&pinctrl_1 {
1027 pinctrl-names = "default";
1028 pinctrl-0 = <&sleep1>;
1029
1030 sleep1: sleep-states {
1031 PIN_SLP(gpk0-0, PREV, NONE);
1032 PIN_SLP(gpk0-1, PREV, NONE);
1033 PIN_SLP(gpk0-2, OUT0, NONE);
1034 PIN_SLP(gpk0-3, PREV, NONE);
1035 PIN_SLP(gpk0-4, PREV, NONE);
1036 PIN_SLP(gpk0-5, PREV, NONE);
1037 PIN_SLP(gpk0-6, PREV, NONE);
1038
1039 PIN_SLP(gpk1-0, INPUT, DOWN);
1040 PIN_SLP(gpk1-1, INPUT, DOWN);
1041 PIN_SLP(gpk1-2, INPUT, DOWN);
1042 PIN_SLP(gpk1-3, PREV, NONE);
1043 PIN_SLP(gpk1-4, PREV, NONE);
1044 PIN_SLP(gpk1-5, PREV, NONE);
1045 PIN_SLP(gpk1-6, PREV, NONE);
1046
1047 PIN_SLP(gpk2-0, INPUT, DOWN);
1048 PIN_SLP(gpk2-1, INPUT, DOWN);
1049 PIN_SLP(gpk2-2, INPUT, DOWN);
1050 PIN_SLP(gpk2-3, INPUT, DOWN);
1051 PIN_SLP(gpk2-4, INPUT, DOWN);
1052 PIN_SLP(gpk2-5, INPUT, DOWN);
1053 PIN_SLP(gpk2-6, INPUT, DOWN);
1054
1055 PIN_SLP(gpk3-0, OUT0, NONE);
1056 PIN_SLP(gpk3-1, INPUT, NONE);
1057 PIN_SLP(gpk3-2, INPUT, DOWN);
1058 PIN_SLP(gpk3-3, INPUT, NONE);
1059 PIN_SLP(gpk3-4, INPUT, NONE);
1060 PIN_SLP(gpk3-5, INPUT, NONE);
1061 PIN_SLP(gpk3-6, INPUT, NONE);
1062
1063 PIN_SLP(gpl0-0, INPUT, DOWN);
1064 PIN_SLP(gpl0-1, INPUT, DOWN);
1065 PIN_SLP(gpl0-2, INPUT, DOWN);
1066 PIN_SLP(gpl0-3, INPUT, DOWN);
1067 PIN_SLP(gpl0-4, PREV, NONE);
1068 PIN_SLP(gpl0-6, PREV, NONE);
1069
1070 PIN_SLP(gpl1-0, INPUT, DOWN);
1071 PIN_SLP(gpl1-1, INPUT, DOWN);
1072 PIN_SLP(gpl2-0, INPUT, DOWN);
1073 PIN_SLP(gpl2-1, INPUT, DOWN);
1074 PIN_SLP(gpl2-2, INPUT, DOWN);
1075 PIN_SLP(gpl2-3, INPUT, DOWN);
1076 PIN_SLP(gpl2-4, INPUT, DOWN);
1077 PIN_SLP(gpl2-5, INPUT, DOWN);
1078 PIN_SLP(gpl2-6, PREV, NONE);
1079 PIN_SLP(gpl2-7, INPUT, DOWN);
1080
1081 PIN_SLP(gpm0-0, INPUT, DOWN);
1082 PIN_SLP(gpm0-1, INPUT, DOWN);
1083 PIN_SLP(gpm0-2, INPUT, DOWN);
1084 PIN_SLP(gpm0-3, INPUT, DOWN);
1085 PIN_SLP(gpm0-4, INPUT, DOWN);
1086 PIN_SLP(gpm0-5, INPUT, DOWN);
1087 PIN_SLP(gpm0-6, INPUT, DOWN);
1088 PIN_SLP(gpm0-7, INPUT, DOWN);
1089
1090 PIN_SLP(gpm1-0, INPUT, DOWN);
1091 PIN_SLP(gpm1-1, INPUT, DOWN);
1092 PIN_SLP(gpm1-2, INPUT, NONE);
1093 PIN_SLP(gpm1-3, INPUT, NONE);
1094 PIN_SLP(gpm1-4, INPUT, NONE);
1095 PIN_SLP(gpm1-5, INPUT, NONE);
1096 PIN_SLP(gpm1-6, INPUT, DOWN);
1097
1098 PIN_SLP(gpm2-0, INPUT, NONE);
1099 PIN_SLP(gpm2-1, INPUT, NONE);
1100 PIN_SLP(gpm2-2, INPUT, DOWN);
1101 PIN_SLP(gpm2-3, INPUT, DOWN);
1102 PIN_SLP(gpm2-4, INPUT, DOWN);
1103
1104 PIN_SLP(gpm3-0, PREV, NONE);
1105 PIN_SLP(gpm3-1, PREV, NONE);
1106 PIN_SLP(gpm3-2, PREV, NONE);
1107 PIN_SLP(gpm3-3, OUT1, NONE);
1108 PIN_SLP(gpm3-4, INPUT, DOWN);
1109 PIN_SLP(gpm3-5, INPUT, DOWN);
1110 PIN_SLP(gpm3-6, INPUT, DOWN);
1111 PIN_SLP(gpm3-7, INPUT, DOWN);
1112
1113 PIN_SLP(gpm4-0, INPUT, DOWN);
1114 PIN_SLP(gpm4-1, INPUT, DOWN);
1115 PIN_SLP(gpm4-2, INPUT, DOWN);
1116 PIN_SLP(gpm4-3, INPUT, DOWN);
1117 PIN_SLP(gpm4-4, INPUT, DOWN);
1118 PIN_SLP(gpm4-5, INPUT, DOWN);
1119 PIN_SLP(gpm4-6, INPUT, DOWN);
1120 PIN_SLP(gpm4-7, INPUT, DOWN);
1121
1122 PIN_SLP(gpy0-0, INPUT, DOWN);
1123 PIN_SLP(gpy0-1, INPUT, DOWN);
1124 PIN_SLP(gpy0-2, INPUT, DOWN);
1125 PIN_SLP(gpy0-3, INPUT, DOWN);
1126 PIN_SLP(gpy0-4, INPUT, DOWN);
1127 PIN_SLP(gpy0-5, INPUT, DOWN);
1128
1129 PIN_SLP(gpy1-0, INPUT, DOWN);
1130 PIN_SLP(gpy1-1, INPUT, DOWN);
1131 PIN_SLP(gpy1-2, INPUT, DOWN);
1132 PIN_SLP(gpy1-3, INPUT, DOWN);
1133
1134 PIN_SLP(gpy2-0, PREV, NONE);
1135 PIN_SLP(gpy2-1, INPUT, DOWN);
1136 PIN_SLP(gpy2-2, INPUT, NONE);
1137 PIN_SLP(gpy2-3, INPUT, NONE);
1138 PIN_SLP(gpy2-4, INPUT, NONE);
1139 PIN_SLP(gpy2-5, INPUT, NONE);
1140
1141 PIN_SLP(gpy3-0, INPUT, DOWN);
1142 PIN_SLP(gpy3-1, INPUT, DOWN);
1143 PIN_SLP(gpy3-2, INPUT, DOWN);
1144 PIN_SLP(gpy3-3, INPUT, DOWN);
1145 PIN_SLP(gpy3-4, INPUT, DOWN);
1146 PIN_SLP(gpy3-5, INPUT, DOWN);
1147 PIN_SLP(gpy3-6, INPUT, DOWN);
1148 PIN_SLP(gpy3-7, INPUT, DOWN);
1149
1150 PIN_SLP(gpy4-0, INPUT, DOWN);
1151 PIN_SLP(gpy4-1, INPUT, DOWN);
1152 PIN_SLP(gpy4-2, INPUT, DOWN);
1153 PIN_SLP(gpy4-3, INPUT, DOWN);
1154 PIN_SLP(gpy4-4, INPUT, DOWN);
1155 PIN_SLP(gpy4-5, INPUT, DOWN);
1156 PIN_SLP(gpy4-6, INPUT, DOWN);
1157 PIN_SLP(gpy4-7, INPUT, DOWN);
1158
1159 PIN_SLP(gpy5-0, INPUT, DOWN);
1160 PIN_SLP(gpy5-1, INPUT, DOWN);
1161 PIN_SLP(gpy5-2, INPUT, DOWN);
1162 PIN_SLP(gpy5-3, INPUT, DOWN);
1163 PIN_SLP(gpy5-4, INPUT, DOWN);
1164 PIN_SLP(gpy5-5, INPUT, DOWN);
1165 PIN_SLP(gpy5-6, INPUT, DOWN);
1166 PIN_SLP(gpy5-7, INPUT, DOWN);
1167
1168 PIN_SLP(gpy6-0, INPUT, DOWN);
1169 PIN_SLP(gpy6-1, INPUT, DOWN);
1170 PIN_SLP(gpy6-2, INPUT, DOWN);
1171 PIN_SLP(gpy6-3, INPUT, DOWN);
1172 PIN_SLP(gpy6-4, INPUT, DOWN);
1173 PIN_SLP(gpy6-5, INPUT, DOWN);
1174 PIN_SLP(gpy6-6, INPUT, DOWN);
1175 PIN_SLP(gpy6-7, INPUT, DOWN);
1176 };
1177};
1178
1179&pinctrl_2 {
1180 pinctrl-names = "default";
1181 pinctrl-0 = <&sleep2>;
1182
1183 sleep2: sleep-states {
1184 PIN_SLP(gpz-0, INPUT, DOWN);
1185 PIN_SLP(gpz-1, INPUT, DOWN);
1186 PIN_SLP(gpz-2, INPUT, DOWN);
1187 PIN_SLP(gpz-3, INPUT, DOWN);
1188 PIN_SLP(gpz-4, INPUT, DOWN);
1189 PIN_SLP(gpz-5, INPUT, DOWN);
1190 PIN_SLP(gpz-6, INPUT, DOWN);
1191 };
1192};
1193
1194&pinctrl_3 {
1195 pinctrl-names = "default";
1196 pinctrl-0 = <&sleep3>;
1197
1198 sleep3: sleep-states {
1199 PIN_SLP(gpv0-0, INPUT, DOWN);
1200 PIN_SLP(gpv0-1, INPUT, DOWN);
1201 PIN_SLP(gpv0-2, INPUT, DOWN);
1202 PIN_SLP(gpv0-3, INPUT, DOWN);
1203 PIN_SLP(gpv0-4, INPUT, DOWN);
1204 PIN_SLP(gpv0-5, INPUT, DOWN);
1205 PIN_SLP(gpv0-6, INPUT, DOWN);
1206 PIN_SLP(gpv0-7, INPUT, DOWN);
1207
1208 PIN_SLP(gpv1-0, INPUT, DOWN);
1209 PIN_SLP(gpv1-1, INPUT, DOWN);
1210 PIN_SLP(gpv1-2, INPUT, DOWN);
1211 PIN_SLP(gpv1-3, INPUT, DOWN);
1212 PIN_SLP(gpv1-4, INPUT, DOWN);
1213 PIN_SLP(gpv1-5, INPUT, DOWN);
1214 PIN_SLP(gpv1-6, INPUT, DOWN);
1215 PIN_SLP(gpv1-7, INPUT, DOWN);
1216
1217 PIN_SLP(gpv2-0, INPUT, DOWN);
1218 PIN_SLP(gpv2-1, INPUT, DOWN);
1219 PIN_SLP(gpv2-2, INPUT, DOWN);
1220 PIN_SLP(gpv2-3, INPUT, DOWN);
1221 PIN_SLP(gpv2-4, INPUT, DOWN);
1222 PIN_SLP(gpv2-5, INPUT, DOWN);
1223 PIN_SLP(gpv2-6, INPUT, DOWN);
1224 PIN_SLP(gpv2-7, INPUT, DOWN);
1225
1226 PIN_SLP(gpv3-0, INPUT, DOWN);
1227 PIN_SLP(gpv3-1, INPUT, DOWN);
1228 PIN_SLP(gpv3-2, INPUT, DOWN);
1229 PIN_SLP(gpv3-3, INPUT, DOWN);
1230 PIN_SLP(gpv3-4, INPUT, DOWN);
1231 PIN_SLP(gpv3-5, INPUT, DOWN);
1232 PIN_SLP(gpv3-6, INPUT, DOWN);
1233 PIN_SLP(gpv3-7, INPUT, DOWN);
1234
1235 PIN_SLP(gpv4-0, INPUT, DOWN);
1236 };
1237};
1238
1239&pwm {
1240 pinctrl-0 = <&pwm0_out>;
1241 pinctrl-names = "default";
1242 samsung,pwm-outputs = <0>;
1243 status = "okay";
1244};
1245
1246&rtc {
1247 status = "okay";
1248 clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1249 clock-names = "rtc", "rtc_src";
1250};
1251
1252&sdhci_2 {
1253 bus-width = <4>;
1254 cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1255 cd-inverted;
1256 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1257 pinctrl-names = "default";
1258 vmmc-supply = <&ldo21_reg>;
1259 status = "okay";
1260};
1261
1262&serial_0 {
1263 status = "okay";
1264};
1265
1266&serial_1 {
1267 status = "okay";
1268};
1269
1270&serial_2 {
1271 status = "okay";
1272};
1273
1274&serial_3 {
1275 status = "okay";
1276};
1277
1278&spi_1 {
1279 pinctrl-names = "default";
1280 pinctrl-0 = <&spi1_bus>;
1281 cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1282 status = "okay";
1283
1284 s5c73m3_spi: s5c73m3@0 {
1285 compatible = "samsung,s5c73m3";
1286 spi-max-frequency = <50000000>;
1287 reg = <0>;
1288 controller-data {
1289 samsung,spi-feedback-delay = <2>;
1290 };
1291 };
1292};
1293
1294&tmu {
1295 vtmu-supply = <&ldo10_reg>;
1296 status = "okay";
1297};