Loading...
1// SPDX-License-Identifier: GPL-2.0+
2//
3// max8998.c - Voltage regulator driver for the Maxim 8998
4//
5// Copyright (C) 2009-2010 Samsung Electronics
6// Kyungmin Park <kyungmin.park@samsung.com>
7// Marek Szyprowski <m.szyprowski@samsung.com>
8
9#include <linux/module.h>
10#include <linux/init.h>
11#include <linux/i2c.h>
12#include <linux/err.h>
13#include <linux/gpio.h>
14#include <linux/slab.h>
15#include <linux/interrupt.h>
16#include <linux/mutex.h>
17#include <linux/of.h>
18#include <linux/of_gpio.h>
19#include <linux/platform_device.h>
20#include <linux/regulator/driver.h>
21#include <linux/regulator/of_regulator.h>
22#include <linux/mfd/max8998.h>
23#include <linux/mfd/max8998-private.h>
24
25struct max8998_data {
26 struct device *dev;
27 struct max8998_dev *iodev;
28 int num_regulators;
29 u8 buck1_vol[4]; /* voltages for selection */
30 u8 buck2_vol[2];
31 unsigned int buck1_idx; /* index to last changed voltage */
32 /* value in a set */
33 unsigned int buck2_idx;
34};
35
36static const unsigned int charger_current_table[] = {
37 90000, 380000, 475000, 550000, 570000, 600000, 700000, 800000,
38};
39
40static int max8998_get_enable_register(struct regulator_dev *rdev,
41 int *reg, int *shift)
42{
43 int ldo = rdev_get_id(rdev);
44
45 switch (ldo) {
46 case MAX8998_LDO2 ... MAX8998_LDO5:
47 *reg = MAX8998_REG_ONOFF1;
48 *shift = 3 - (ldo - MAX8998_LDO2);
49 break;
50 case MAX8998_LDO6 ... MAX8998_LDO13:
51 *reg = MAX8998_REG_ONOFF2;
52 *shift = 7 - (ldo - MAX8998_LDO6);
53 break;
54 case MAX8998_LDO14 ... MAX8998_LDO17:
55 *reg = MAX8998_REG_ONOFF3;
56 *shift = 7 - (ldo - MAX8998_LDO14);
57 break;
58 case MAX8998_BUCK1 ... MAX8998_BUCK4:
59 *reg = MAX8998_REG_ONOFF1;
60 *shift = 7 - (ldo - MAX8998_BUCK1);
61 break;
62 case MAX8998_EN32KHZ_AP ... MAX8998_ENVICHG:
63 *reg = MAX8998_REG_ONOFF4;
64 *shift = 7 - (ldo - MAX8998_EN32KHZ_AP);
65 break;
66 case MAX8998_ESAFEOUT1 ... MAX8998_ESAFEOUT2:
67 *reg = MAX8998_REG_CHGR2;
68 *shift = 7 - (ldo - MAX8998_ESAFEOUT1);
69 break;
70 case MAX8998_CHARGER:
71 *reg = MAX8998_REG_CHGR2;
72 *shift = 0;
73 break;
74 default:
75 return -EINVAL;
76 }
77
78 return 0;
79}
80
81static int max8998_ldo_is_enabled(struct regulator_dev *rdev)
82{
83 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
84 struct i2c_client *i2c = max8998->iodev->i2c;
85 int ret, reg, shift = 8;
86 u8 val;
87
88 ret = max8998_get_enable_register(rdev, ®, &shift);
89 if (ret)
90 return ret;
91
92 ret = max8998_read_reg(i2c, reg, &val);
93 if (ret)
94 return ret;
95
96 return val & (1 << shift);
97}
98
99static int max8998_ldo_is_enabled_inverted(struct regulator_dev *rdev)
100{
101 return (!max8998_ldo_is_enabled(rdev));
102}
103
104static int max8998_ldo_enable(struct regulator_dev *rdev)
105{
106 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
107 struct i2c_client *i2c = max8998->iodev->i2c;
108 int reg, shift = 8, ret;
109
110 ret = max8998_get_enable_register(rdev, ®, &shift);
111 if (ret)
112 return ret;
113
114 return max8998_update_reg(i2c, reg, 1<<shift, 1<<shift);
115}
116
117static int max8998_ldo_disable(struct regulator_dev *rdev)
118{
119 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
120 struct i2c_client *i2c = max8998->iodev->i2c;
121 int reg, shift = 8, ret;
122
123 ret = max8998_get_enable_register(rdev, ®, &shift);
124 if (ret)
125 return ret;
126
127 return max8998_update_reg(i2c, reg, 0, 1<<shift);
128}
129
130static int max8998_get_voltage_register(struct regulator_dev *rdev,
131 int *_reg, int *_shift, int *_mask)
132{
133 int ldo = rdev_get_id(rdev);
134 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
135 int reg, shift = 0, mask = 0xff;
136
137 switch (ldo) {
138 case MAX8998_LDO2 ... MAX8998_LDO3:
139 reg = MAX8998_REG_LDO2_LDO3;
140 mask = 0xf;
141 if (ldo == MAX8998_LDO2)
142 shift = 4;
143 else
144 shift = 0;
145 break;
146 case MAX8998_LDO4 ... MAX8998_LDO7:
147 reg = MAX8998_REG_LDO4 + (ldo - MAX8998_LDO4);
148 break;
149 case MAX8998_LDO8 ... MAX8998_LDO9:
150 reg = MAX8998_REG_LDO8_LDO9;
151 mask = 0xf;
152 if (ldo == MAX8998_LDO8)
153 shift = 4;
154 else
155 shift = 0;
156 break;
157 case MAX8998_LDO10 ... MAX8998_LDO11:
158 reg = MAX8998_REG_LDO10_LDO11;
159 if (ldo == MAX8998_LDO10) {
160 shift = 5;
161 mask = 0x7;
162 } else {
163 shift = 0;
164 mask = 0x1f;
165 }
166 break;
167 case MAX8998_LDO12 ... MAX8998_LDO17:
168 reg = MAX8998_REG_LDO12 + (ldo - MAX8998_LDO12);
169 break;
170 case MAX8998_BUCK1:
171 reg = MAX8998_REG_BUCK1_VOLTAGE1 + max8998->buck1_idx;
172 break;
173 case MAX8998_BUCK2:
174 reg = MAX8998_REG_BUCK2_VOLTAGE1 + max8998->buck2_idx;
175 break;
176 case MAX8998_BUCK3:
177 reg = MAX8998_REG_BUCK3;
178 break;
179 case MAX8998_BUCK4:
180 reg = MAX8998_REG_BUCK4;
181 break;
182 default:
183 return -EINVAL;
184 }
185
186 *_reg = reg;
187 *_shift = shift;
188 *_mask = mask;
189
190 return 0;
191}
192
193static int max8998_get_voltage_sel(struct regulator_dev *rdev)
194{
195 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
196 struct i2c_client *i2c = max8998->iodev->i2c;
197 int reg, shift = 0, mask, ret;
198 u8 val;
199
200 ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
201 if (ret)
202 return ret;
203
204 ret = max8998_read_reg(i2c, reg, &val);
205 if (ret)
206 return ret;
207
208 val >>= shift;
209 val &= mask;
210
211 return val;
212}
213
214static int max8998_set_voltage_ldo_sel(struct regulator_dev *rdev,
215 unsigned selector)
216{
217 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
218 struct i2c_client *i2c = max8998->iodev->i2c;
219 int reg, shift = 0, mask, ret;
220
221 ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
222 if (ret)
223 return ret;
224
225 ret = max8998_update_reg(i2c, reg, selector<<shift, mask<<shift);
226
227 return ret;
228}
229
230static inline void buck1_gpio_set(int gpio1, int gpio2, int v)
231{
232 gpio_set_value(gpio1, v & 0x1);
233 gpio_set_value(gpio2, (v >> 1) & 0x1);
234}
235
236static inline void buck2_gpio_set(int gpio, int v)
237{
238 gpio_set_value(gpio, v & 0x1);
239}
240
241static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev,
242 unsigned selector)
243{
244 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
245 struct max8998_platform_data *pdata = max8998->iodev->pdata;
246 struct i2c_client *i2c = max8998->iodev->i2c;
247 int buck = rdev_get_id(rdev);
248 int reg, shift = 0, mask, ret, j;
249 static u8 buck1_last_val;
250
251 ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
252 if (ret)
253 return ret;
254
255 switch (buck) {
256 case MAX8998_BUCK1:
257 dev_dbg(max8998->dev,
258 "BUCK1, selector:%d, buck1_vol1:%d, buck1_vol2:%d\n"
259 "buck1_vol3:%d, buck1_vol4:%d\n",
260 selector, max8998->buck1_vol[0], max8998->buck1_vol[1],
261 max8998->buck1_vol[2], max8998->buck1_vol[3]);
262
263 if (gpio_is_valid(pdata->buck1_set1) &&
264 gpio_is_valid(pdata->buck1_set2)) {
265
266 /* check if requested voltage */
267 /* value is already defined */
268 for (j = 0; j < ARRAY_SIZE(max8998->buck1_vol); j++) {
269 if (max8998->buck1_vol[j] == selector) {
270 max8998->buck1_idx = j;
271 buck1_gpio_set(pdata->buck1_set1,
272 pdata->buck1_set2, j);
273 goto buck1_exit;
274 }
275 }
276
277 if (pdata->buck_voltage_lock)
278 return -EINVAL;
279
280 /* no predefine regulator found */
281 max8998->buck1_idx = (buck1_last_val % 2) + 2;
282 dev_dbg(max8998->dev, "max8998->buck1_idx:%d\n",
283 max8998->buck1_idx);
284 max8998->buck1_vol[max8998->buck1_idx] = selector;
285 ret = max8998_get_voltage_register(rdev, ®,
286 &shift,
287 &mask);
288 ret = max8998_write_reg(i2c, reg, selector);
289 buck1_gpio_set(pdata->buck1_set1,
290 pdata->buck1_set2, max8998->buck1_idx);
291 buck1_last_val++;
292buck1_exit:
293 dev_dbg(max8998->dev, "%s: SET1:%d, SET2:%d\n",
294 i2c->name, gpio_get_value(pdata->buck1_set1),
295 gpio_get_value(pdata->buck1_set2));
296 break;
297 } else {
298 ret = max8998_write_reg(i2c, reg, selector);
299 }
300 break;
301
302 case MAX8998_BUCK2:
303 dev_dbg(max8998->dev,
304 "BUCK2, selector:%d buck2_vol1:%d, buck2_vol2:%d\n",
305 selector, max8998->buck2_vol[0], max8998->buck2_vol[1]);
306 if (gpio_is_valid(pdata->buck2_set3)) {
307
308 /* check if requested voltage */
309 /* value is already defined */
310 for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) {
311 if (max8998->buck2_vol[j] == selector) {
312 max8998->buck2_idx = j;
313 buck2_gpio_set(pdata->buck2_set3, j);
314 goto buck2_exit;
315 }
316 }
317
318 if (pdata->buck_voltage_lock)
319 return -EINVAL;
320
321 max8998_get_voltage_register(rdev,
322 ®, &shift, &mask);
323 ret = max8998_write_reg(i2c, reg, selector);
324 max8998->buck2_vol[max8998->buck2_idx] = selector;
325 buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx);
326buck2_exit:
327 dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name,
328 gpio_get_value(pdata->buck2_set3));
329 } else {
330 ret = max8998_write_reg(i2c, reg, selector);
331 }
332 break;
333
334 case MAX8998_BUCK3:
335 case MAX8998_BUCK4:
336 ret = max8998_update_reg(i2c, reg, selector<<shift,
337 mask<<shift);
338 break;
339 }
340
341 return ret;
342}
343
344static int max8998_set_voltage_buck_time_sel(struct regulator_dev *rdev,
345 unsigned int old_selector,
346 unsigned int new_selector)
347{
348 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
349 struct i2c_client *i2c = max8998->iodev->i2c;
350 int buck = rdev_get_id(rdev);
351 u8 val = 0;
352 int difference, ret;
353
354 if (buck < MAX8998_BUCK1 || buck > MAX8998_BUCK4)
355 return -EINVAL;
356
357 /* Voltage stabilization */
358 ret = max8998_read_reg(i2c, MAX8998_REG_ONOFF4, &val);
359 if (ret)
360 return ret;
361
362 /* lp3974 hasn't got ENRAMP bit - ramp is assumed as true */
363 /* MAX8998 has ENRAMP bit implemented, so test it*/
364 if (max8998->iodev->type == TYPE_MAX8998 && !(val & MAX8998_ENRAMP))
365 return 0;
366
367 difference = (new_selector - old_selector) * rdev->desc->uV_step / 1000;
368 if (difference > 0)
369 return DIV_ROUND_UP(difference, (val & 0x0f) + 1);
370
371 return 0;
372}
373
374static int max8998_set_current_limit(struct regulator_dev *rdev,
375 int min_uA, int max_uA)
376{
377 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
378 struct i2c_client *i2c = max8998->iodev->i2c;
379 unsigned int n_currents = rdev->desc->n_current_limits;
380 int i, sel = -1;
381
382 if (n_currents == 0)
383 return -EINVAL;
384
385 if (rdev->desc->curr_table) {
386 const unsigned int *curr_table = rdev->desc->curr_table;
387 bool ascend = curr_table[n_currents - 1] > curr_table[0];
388
389 /* search for closest to maximum */
390 if (ascend) {
391 for (i = n_currents - 1; i >= 0; i--) {
392 if (min_uA <= curr_table[i] &&
393 curr_table[i] <= max_uA) {
394 sel = i;
395 break;
396 }
397 }
398 } else {
399 for (i = 0; i < n_currents; i++) {
400 if (min_uA <= curr_table[i] &&
401 curr_table[i] <= max_uA) {
402 sel = i;
403 break;
404 }
405 }
406 }
407 }
408
409 if (sel < 0)
410 return -EINVAL;
411
412 sel <<= ffs(rdev->desc->csel_mask) - 1;
413
414 return max8998_update_reg(i2c, rdev->desc->csel_reg,
415 sel, rdev->desc->csel_mask);
416}
417
418static int max8998_get_current_limit(struct regulator_dev *rdev)
419{
420 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
421 struct i2c_client *i2c = max8998->iodev->i2c;
422 u8 val;
423 int ret;
424
425 ret = max8998_read_reg(i2c, rdev->desc->csel_reg, &val);
426 if (ret != 0)
427 return ret;
428
429 val &= rdev->desc->csel_mask;
430 val >>= ffs(rdev->desc->csel_mask) - 1;
431
432 if (rdev->desc->curr_table) {
433 if (val >= rdev->desc->n_current_limits)
434 return -EINVAL;
435
436 return rdev->desc->curr_table[val];
437 }
438
439 return -EINVAL;
440}
441
442static const struct regulator_ops max8998_ldo_ops = {
443 .list_voltage = regulator_list_voltage_linear,
444 .map_voltage = regulator_map_voltage_linear,
445 .is_enabled = max8998_ldo_is_enabled,
446 .enable = max8998_ldo_enable,
447 .disable = max8998_ldo_disable,
448 .get_voltage_sel = max8998_get_voltage_sel,
449 .set_voltage_sel = max8998_set_voltage_ldo_sel,
450};
451
452static const struct regulator_ops max8998_buck_ops = {
453 .list_voltage = regulator_list_voltage_linear,
454 .map_voltage = regulator_map_voltage_linear,
455 .is_enabled = max8998_ldo_is_enabled,
456 .enable = max8998_ldo_enable,
457 .disable = max8998_ldo_disable,
458 .get_voltage_sel = max8998_get_voltage_sel,
459 .set_voltage_sel = max8998_set_voltage_buck_sel,
460 .set_voltage_time_sel = max8998_set_voltage_buck_time_sel,
461};
462
463static const struct regulator_ops max8998_charger_ops = {
464 .set_current_limit = max8998_set_current_limit,
465 .get_current_limit = max8998_get_current_limit,
466 .is_enabled = max8998_ldo_is_enabled_inverted,
467 /* Swapped as register is inverted */
468 .enable = max8998_ldo_disable,
469 .disable = max8998_ldo_enable,
470};
471
472static const struct regulator_ops max8998_others_ops = {
473 .is_enabled = max8998_ldo_is_enabled,
474 .enable = max8998_ldo_enable,
475 .disable = max8998_ldo_disable,
476};
477
478#define MAX8998_LINEAR_REG(_name, _ops, _min, _step, _max) \
479 { \
480 .name = #_name, \
481 .id = MAX8998_##_name, \
482 .ops = _ops, \
483 .min_uV = (_min), \
484 .uV_step = (_step), \
485 .n_voltages = ((_max) - (_min)) / (_step) + 1, \
486 .type = REGULATOR_VOLTAGE, \
487 .owner = THIS_MODULE, \
488 }
489
490#define MAX8998_CURRENT_REG(_name, _ops, _table, _reg, _mask) \
491 { \
492 .name = #_name, \
493 .id = MAX8998_##_name, \
494 .ops = _ops, \
495 .curr_table = _table, \
496 .n_current_limits = ARRAY_SIZE(_table), \
497 .csel_reg = _reg, \
498 .csel_mask = _mask, \
499 .type = REGULATOR_CURRENT, \
500 .owner = THIS_MODULE, \
501 }
502
503#define MAX8998_OTHERS_REG(_name, _id) \
504 { \
505 .name = #_name, \
506 .id = _id, \
507 .ops = &max8998_others_ops, \
508 .type = REGULATOR_VOLTAGE, \
509 .owner = THIS_MODULE, \
510 }
511
512static const struct regulator_desc regulators[] = {
513 MAX8998_LINEAR_REG(LDO2, &max8998_ldo_ops, 800000, 50000, 1300000),
514 MAX8998_LINEAR_REG(LDO3, &max8998_ldo_ops, 800000, 50000, 1300000),
515 MAX8998_LINEAR_REG(LDO4, &max8998_ldo_ops, 1600000, 100000, 3600000),
516 MAX8998_LINEAR_REG(LDO5, &max8998_ldo_ops, 1600000, 100000, 3600000),
517 MAX8998_LINEAR_REG(LDO6, &max8998_ldo_ops, 1600000, 100000, 3600000),
518 MAX8998_LINEAR_REG(LDO7, &max8998_ldo_ops, 1600000, 100000, 3600000),
519 MAX8998_LINEAR_REG(LDO8, &max8998_ldo_ops, 3000000, 100000, 3600000),
520 MAX8998_LINEAR_REG(LDO9, &max8998_ldo_ops, 2800000, 100000, 3100000),
521 MAX8998_LINEAR_REG(LDO10, &max8998_ldo_ops, 950000, 50000, 1300000),
522 MAX8998_LINEAR_REG(LDO11, &max8998_ldo_ops, 1600000, 100000, 3600000),
523 MAX8998_LINEAR_REG(LDO12, &max8998_ldo_ops, 800000, 100000, 3300000),
524 MAX8998_LINEAR_REG(LDO13, &max8998_ldo_ops, 800000, 100000, 3300000),
525 MAX8998_LINEAR_REG(LDO14, &max8998_ldo_ops, 1200000, 100000, 3300000),
526 MAX8998_LINEAR_REG(LDO15, &max8998_ldo_ops, 1200000, 100000, 3300000),
527 MAX8998_LINEAR_REG(LDO16, &max8998_ldo_ops, 1600000, 100000, 3600000),
528 MAX8998_LINEAR_REG(LDO17, &max8998_ldo_ops, 1600000, 100000, 3600000),
529 MAX8998_LINEAR_REG(BUCK1, &max8998_buck_ops, 750000, 25000, 1525000),
530 MAX8998_LINEAR_REG(BUCK2, &max8998_buck_ops, 750000, 25000, 1525000),
531 MAX8998_LINEAR_REG(BUCK3, &max8998_buck_ops, 1600000, 100000, 3600000),
532 MAX8998_LINEAR_REG(BUCK4, &max8998_buck_ops, 800000, 100000, 2300000),
533 MAX8998_OTHERS_REG(EN32KHz-AP, MAX8998_EN32KHZ_AP),
534 MAX8998_OTHERS_REG(EN32KHz-CP, MAX8998_EN32KHZ_CP),
535 MAX8998_OTHERS_REG(ENVICHG, MAX8998_ENVICHG),
536 MAX8998_OTHERS_REG(ESAFEOUT1, MAX8998_ESAFEOUT1),
537 MAX8998_OTHERS_REG(ESAFEOUT2, MAX8998_ESAFEOUT2),
538 MAX8998_CURRENT_REG(CHARGER, &max8998_charger_ops,
539 charger_current_table, MAX8998_REG_CHGR1, 0x7),
540};
541
542static int max8998_pmic_dt_parse_dvs_gpio(struct max8998_dev *iodev,
543 struct max8998_platform_data *pdata,
544 struct device_node *pmic_np)
545{
546 int gpio;
547
548 gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 0);
549 if (!gpio_is_valid(gpio)) {
550 dev_err(iodev->dev, "invalid buck1 gpio[0]: %d\n", gpio);
551 return -EINVAL;
552 }
553 pdata->buck1_set1 = gpio;
554
555 gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 1);
556 if (!gpio_is_valid(gpio)) {
557 dev_err(iodev->dev, "invalid buck1 gpio[1]: %d\n", gpio);
558 return -EINVAL;
559 }
560 pdata->buck1_set2 = gpio;
561
562 gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck2-dvs-gpio", 0);
563 if (!gpio_is_valid(gpio)) {
564 dev_err(iodev->dev, "invalid buck 2 gpio: %d\n", gpio);
565 return -EINVAL;
566 }
567 pdata->buck2_set3 = gpio;
568
569 return 0;
570}
571
572static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev,
573 struct max8998_platform_data *pdata)
574{
575 struct device_node *pmic_np = iodev->dev->of_node;
576 struct device_node *regulators_np, *reg_np;
577 struct max8998_regulator_data *rdata;
578 unsigned int i;
579 int ret;
580
581 regulators_np = of_get_child_by_name(pmic_np, "regulators");
582 if (!regulators_np) {
583 dev_err(iodev->dev, "could not find regulators sub-node\n");
584 return -EINVAL;
585 }
586
587 /* count the number of regulators to be supported in pmic */
588 pdata->num_regulators = of_get_child_count(regulators_np);
589
590 rdata = devm_kcalloc(iodev->dev,
591 pdata->num_regulators, sizeof(*rdata),
592 GFP_KERNEL);
593 if (!rdata) {
594 of_node_put(regulators_np);
595 return -ENOMEM;
596 }
597
598 pdata->regulators = rdata;
599 for (i = 0; i < ARRAY_SIZE(regulators); ++i) {
600 reg_np = of_get_child_by_name(regulators_np,
601 regulators[i].name);
602 if (!reg_np)
603 continue;
604
605 rdata->id = regulators[i].id;
606 rdata->initdata = of_get_regulator_init_data(iodev->dev,
607 reg_np,
608 ®ulators[i]);
609 rdata->reg_node = reg_np;
610 ++rdata;
611 }
612 pdata->num_regulators = rdata - pdata->regulators;
613
614 of_node_put(reg_np);
615 of_node_put(regulators_np);
616
617 ret = max8998_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
618 if (ret)
619 return -EINVAL;
620
621 if (of_find_property(pmic_np, "max8998,pmic-buck-voltage-lock", NULL))
622 pdata->buck_voltage_lock = true;
623
624 ret = of_property_read_u32(pmic_np,
625 "max8998,pmic-buck1-default-dvs-idx",
626 &pdata->buck1_default_idx);
627 if (!ret && pdata->buck1_default_idx >= 4) {
628 pdata->buck1_default_idx = 0;
629 dev_warn(iodev->dev, "invalid value for default dvs index, using 0 instead\n");
630 }
631
632 ret = of_property_read_u32(pmic_np,
633 "max8998,pmic-buck2-default-dvs-idx",
634 &pdata->buck2_default_idx);
635 if (!ret && pdata->buck2_default_idx >= 2) {
636 pdata->buck2_default_idx = 0;
637 dev_warn(iodev->dev, "invalid value for default dvs index, using 0 instead\n");
638 }
639
640 ret = of_property_read_u32_array(pmic_np,
641 "max8998,pmic-buck1-dvs-voltage",
642 pdata->buck1_voltage,
643 ARRAY_SIZE(pdata->buck1_voltage));
644 if (ret) {
645 dev_err(iodev->dev, "buck1 voltages not specified\n");
646 return -EINVAL;
647 }
648
649 ret = of_property_read_u32_array(pmic_np,
650 "max8998,pmic-buck2-dvs-voltage",
651 pdata->buck2_voltage,
652 ARRAY_SIZE(pdata->buck2_voltage));
653 if (ret) {
654 dev_err(iodev->dev, "buck2 voltages not specified\n");
655 return -EINVAL;
656 }
657
658 return 0;
659}
660
661static int max8998_pmic_probe(struct platform_device *pdev)
662{
663 struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
664 struct max8998_platform_data *pdata = iodev->pdata;
665 struct regulator_config config = { };
666 struct regulator_dev *rdev;
667 struct max8998_data *max8998;
668 struct i2c_client *i2c;
669 int i, ret;
670 unsigned int v;
671
672 if (!pdata) {
673 dev_err(pdev->dev.parent, "No platform init data supplied\n");
674 return -ENODEV;
675 }
676
677 if (IS_ENABLED(CONFIG_OF) && iodev->dev->of_node) {
678 ret = max8998_pmic_dt_parse_pdata(iodev, pdata);
679 if (ret)
680 return ret;
681 }
682
683 max8998 = devm_kzalloc(&pdev->dev, sizeof(struct max8998_data),
684 GFP_KERNEL);
685 if (!max8998)
686 return -ENOMEM;
687
688 max8998->dev = &pdev->dev;
689 max8998->iodev = iodev;
690 max8998->num_regulators = pdata->num_regulators;
691 platform_set_drvdata(pdev, max8998);
692 i2c = max8998->iodev->i2c;
693
694 max8998->buck1_idx = pdata->buck1_default_idx;
695 max8998->buck2_idx = pdata->buck2_default_idx;
696
697 /* NOTE: */
698 /* For unused GPIO NOT marked as -1 (thereof equal to 0) WARN_ON */
699 /* will be displayed */
700
701 /* Check if MAX8998 voltage selection GPIOs are defined */
702 if (gpio_is_valid(pdata->buck1_set1) &&
703 gpio_is_valid(pdata->buck1_set2)) {
704 /* Check if SET1 is not equal to 0 */
705 if (!pdata->buck1_set1) {
706 dev_err(&pdev->dev,
707 "MAX8998 SET1 GPIO defined as 0 !\n");
708 WARN_ON(!pdata->buck1_set1);
709 return -EIO;
710 }
711 /* Check if SET2 is not equal to 0 */
712 if (!pdata->buck1_set2) {
713 dev_err(&pdev->dev,
714 "MAX8998 SET2 GPIO defined as 0 !\n");
715 WARN_ON(!pdata->buck1_set2);
716 return -EIO;
717 }
718
719 gpio_request(pdata->buck1_set1, "MAX8998 BUCK1_SET1");
720 gpio_direction_output(pdata->buck1_set1,
721 max8998->buck1_idx & 0x1);
722
723
724 gpio_request(pdata->buck1_set2, "MAX8998 BUCK1_SET2");
725 gpio_direction_output(pdata->buck1_set2,
726 (max8998->buck1_idx >> 1) & 0x1);
727
728 /* Set predefined values for BUCK1 registers */
729 for (v = 0; v < ARRAY_SIZE(pdata->buck1_voltage); ++v) {
730 int index = MAX8998_BUCK1 - MAX8998_LDO2;
731
732 i = 0;
733 while (regulators[index].min_uV +
734 regulators[index].uV_step * i
735 < pdata->buck1_voltage[v])
736 i++;
737
738 max8998->buck1_vol[v] = i;
739 ret = max8998_write_reg(i2c,
740 MAX8998_REG_BUCK1_VOLTAGE1 + v, i);
741 if (ret)
742 return ret;
743 }
744 }
745
746 if (gpio_is_valid(pdata->buck2_set3)) {
747 /* Check if SET3 is not equal to 0 */
748 if (!pdata->buck2_set3) {
749 dev_err(&pdev->dev,
750 "MAX8998 SET3 GPIO defined as 0 !\n");
751 WARN_ON(!pdata->buck2_set3);
752 return -EIO;
753 }
754 gpio_request(pdata->buck2_set3, "MAX8998 BUCK2_SET3");
755 gpio_direction_output(pdata->buck2_set3,
756 max8998->buck2_idx & 0x1);
757
758 /* Set predefined values for BUCK2 registers */
759 for (v = 0; v < ARRAY_SIZE(pdata->buck2_voltage); ++v) {
760 int index = MAX8998_BUCK2 - MAX8998_LDO2;
761
762 i = 0;
763 while (regulators[index].min_uV +
764 regulators[index].uV_step * i
765 < pdata->buck2_voltage[v])
766 i++;
767
768 max8998->buck2_vol[v] = i;
769 ret = max8998_write_reg(i2c,
770 MAX8998_REG_BUCK2_VOLTAGE1 + v, i);
771 if (ret)
772 return ret;
773 }
774 }
775
776 for (i = 0; i < pdata->num_regulators; i++) {
777 int index = pdata->regulators[i].id - MAX8998_LDO2;
778
779 config.dev = max8998->dev;
780 config.of_node = pdata->regulators[i].reg_node;
781 config.init_data = pdata->regulators[i].initdata;
782 config.driver_data = max8998;
783
784 rdev = devm_regulator_register(&pdev->dev, ®ulators[index],
785 &config);
786 if (IS_ERR(rdev)) {
787 ret = PTR_ERR(rdev);
788 dev_err(max8998->dev, "regulator %s init failed (%d)\n",
789 regulators[index].name, ret);
790 return ret;
791 }
792 }
793
794 return 0;
795}
796
797static const struct platform_device_id max8998_pmic_id[] = {
798 { "max8998-pmic", TYPE_MAX8998 },
799 { "lp3974-pmic", TYPE_LP3974 },
800 { }
801};
802MODULE_DEVICE_TABLE(platform, max8998_pmic_id);
803
804static struct platform_driver max8998_pmic_driver = {
805 .driver = {
806 .name = "max8998-pmic",
807 },
808 .probe = max8998_pmic_probe,
809 .id_table = max8998_pmic_id,
810};
811
812static int __init max8998_pmic_init(void)
813{
814 return platform_driver_register(&max8998_pmic_driver);
815}
816subsys_initcall(max8998_pmic_init);
817
818static void __exit max8998_pmic_cleanup(void)
819{
820 platform_driver_unregister(&max8998_pmic_driver);
821}
822module_exit(max8998_pmic_cleanup);
823
824MODULE_DESCRIPTION("MAXIM 8998 voltage regulator driver");
825MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
826MODULE_LICENSE("GPL");
1/*
2 * max8998.c - Voltage regulator driver for the Maxim 8998
3 *
4 * Copyright (C) 2009-2010 Samsung Electronics
5 * Kyungmin Park <kyungmin.park@samsung.com>
6 * Marek Szyprowski <m.szyprowski@samsung.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 */
22
23#include <linux/module.h>
24#include <linux/init.h>
25#include <linux/i2c.h>
26#include <linux/err.h>
27#include <linux/gpio.h>
28#include <linux/slab.h>
29#include <linux/interrupt.h>
30#include <linux/mutex.h>
31#include <linux/of.h>
32#include <linux/of_gpio.h>
33#include <linux/platform_device.h>
34#include <linux/regulator/driver.h>
35#include <linux/regulator/of_regulator.h>
36#include <linux/mfd/max8998.h>
37#include <linux/mfd/max8998-private.h>
38
39struct max8998_data {
40 struct device *dev;
41 struct max8998_dev *iodev;
42 int num_regulators;
43 u8 buck1_vol[4]; /* voltages for selection */
44 u8 buck2_vol[2];
45 unsigned int buck1_idx; /* index to last changed voltage */
46 /* value in a set */
47 unsigned int buck2_idx;
48};
49
50struct voltage_map_desc {
51 int min;
52 int max;
53 int step;
54};
55
56/* Voltage maps in uV*/
57static const struct voltage_map_desc ldo23_voltage_map_desc = {
58 .min = 800000, .step = 50000, .max = 1300000,
59};
60static const struct voltage_map_desc ldo456711_voltage_map_desc = {
61 .min = 1600000, .step = 100000, .max = 3600000,
62};
63static const struct voltage_map_desc ldo8_voltage_map_desc = {
64 .min = 3000000, .step = 100000, .max = 3600000,
65};
66static const struct voltage_map_desc ldo9_voltage_map_desc = {
67 .min = 2800000, .step = 100000, .max = 3100000,
68};
69static const struct voltage_map_desc ldo10_voltage_map_desc = {
70 .min = 950000, .step = 50000, .max = 1300000,
71};
72static const struct voltage_map_desc ldo1213_voltage_map_desc = {
73 .min = 800000, .step = 100000, .max = 3300000,
74};
75static const struct voltage_map_desc ldo1415_voltage_map_desc = {
76 .min = 1200000, .step = 100000, .max = 3300000,
77};
78static const struct voltage_map_desc ldo1617_voltage_map_desc = {
79 .min = 1600000, .step = 100000, .max = 3600000,
80};
81static const struct voltage_map_desc buck12_voltage_map_desc = {
82 .min = 750000, .step = 25000, .max = 1525000,
83};
84static const struct voltage_map_desc buck3_voltage_map_desc = {
85 .min = 1600000, .step = 100000, .max = 3600000,
86};
87static const struct voltage_map_desc buck4_voltage_map_desc = {
88 .min = 800000, .step = 100000, .max = 2300000,
89};
90
91static const struct voltage_map_desc *ldo_voltage_map[] = {
92 NULL,
93 NULL,
94 &ldo23_voltage_map_desc, /* LDO2 */
95 &ldo23_voltage_map_desc, /* LDO3 */
96 &ldo456711_voltage_map_desc, /* LDO4 */
97 &ldo456711_voltage_map_desc, /* LDO5 */
98 &ldo456711_voltage_map_desc, /* LDO6 */
99 &ldo456711_voltage_map_desc, /* LDO7 */
100 &ldo8_voltage_map_desc, /* LDO8 */
101 &ldo9_voltage_map_desc, /* LDO9 */
102 &ldo10_voltage_map_desc, /* LDO10 */
103 &ldo456711_voltage_map_desc, /* LDO11 */
104 &ldo1213_voltage_map_desc, /* LDO12 */
105 &ldo1213_voltage_map_desc, /* LDO13 */
106 &ldo1415_voltage_map_desc, /* LDO14 */
107 &ldo1415_voltage_map_desc, /* LDO15 */
108 &ldo1617_voltage_map_desc, /* LDO16 */
109 &ldo1617_voltage_map_desc, /* LDO17 */
110 &buck12_voltage_map_desc, /* BUCK1 */
111 &buck12_voltage_map_desc, /* BUCK2 */
112 &buck3_voltage_map_desc, /* BUCK3 */
113 &buck4_voltage_map_desc, /* BUCK4 */
114};
115
116static int max8998_get_enable_register(struct regulator_dev *rdev,
117 int *reg, int *shift)
118{
119 int ldo = rdev_get_id(rdev);
120
121 switch (ldo) {
122 case MAX8998_LDO2 ... MAX8998_LDO5:
123 *reg = MAX8998_REG_ONOFF1;
124 *shift = 3 - (ldo - MAX8998_LDO2);
125 break;
126 case MAX8998_LDO6 ... MAX8998_LDO13:
127 *reg = MAX8998_REG_ONOFF2;
128 *shift = 7 - (ldo - MAX8998_LDO6);
129 break;
130 case MAX8998_LDO14 ... MAX8998_LDO17:
131 *reg = MAX8998_REG_ONOFF3;
132 *shift = 7 - (ldo - MAX8998_LDO14);
133 break;
134 case MAX8998_BUCK1 ... MAX8998_BUCK4:
135 *reg = MAX8998_REG_ONOFF1;
136 *shift = 7 - (ldo - MAX8998_BUCK1);
137 break;
138 case MAX8998_EN32KHZ_AP ... MAX8998_ENVICHG:
139 *reg = MAX8998_REG_ONOFF4;
140 *shift = 7 - (ldo - MAX8998_EN32KHZ_AP);
141 break;
142 case MAX8998_ESAFEOUT1 ... MAX8998_ESAFEOUT2:
143 *reg = MAX8998_REG_CHGR2;
144 *shift = 7 - (ldo - MAX8998_ESAFEOUT1);
145 break;
146 default:
147 return -EINVAL;
148 }
149
150 return 0;
151}
152
153static int max8998_ldo_is_enabled(struct regulator_dev *rdev)
154{
155 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
156 struct i2c_client *i2c = max8998->iodev->i2c;
157 int ret, reg, shift = 8;
158 u8 val;
159
160 ret = max8998_get_enable_register(rdev, ®, &shift);
161 if (ret)
162 return ret;
163
164 ret = max8998_read_reg(i2c, reg, &val);
165 if (ret)
166 return ret;
167
168 return val & (1 << shift);
169}
170
171static int max8998_ldo_enable(struct regulator_dev *rdev)
172{
173 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
174 struct i2c_client *i2c = max8998->iodev->i2c;
175 int reg, shift = 8, ret;
176
177 ret = max8998_get_enable_register(rdev, ®, &shift);
178 if (ret)
179 return ret;
180
181 return max8998_update_reg(i2c, reg, 1<<shift, 1<<shift);
182}
183
184static int max8998_ldo_disable(struct regulator_dev *rdev)
185{
186 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
187 struct i2c_client *i2c = max8998->iodev->i2c;
188 int reg, shift = 8, ret;
189
190 ret = max8998_get_enable_register(rdev, ®, &shift);
191 if (ret)
192 return ret;
193
194 return max8998_update_reg(i2c, reg, 0, 1<<shift);
195}
196
197static int max8998_get_voltage_register(struct regulator_dev *rdev,
198 int *_reg, int *_shift, int *_mask)
199{
200 int ldo = rdev_get_id(rdev);
201 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
202 int reg, shift = 0, mask = 0xff;
203
204 switch (ldo) {
205 case MAX8998_LDO2 ... MAX8998_LDO3:
206 reg = MAX8998_REG_LDO2_LDO3;
207 mask = 0xf;
208 if (ldo == MAX8998_LDO2)
209 shift = 4;
210 else
211 shift = 0;
212 break;
213 case MAX8998_LDO4 ... MAX8998_LDO7:
214 reg = MAX8998_REG_LDO4 + (ldo - MAX8998_LDO4);
215 break;
216 case MAX8998_LDO8 ... MAX8998_LDO9:
217 reg = MAX8998_REG_LDO8_LDO9;
218 mask = 0xf;
219 if (ldo == MAX8998_LDO8)
220 shift = 4;
221 else
222 shift = 0;
223 break;
224 case MAX8998_LDO10 ... MAX8998_LDO11:
225 reg = MAX8998_REG_LDO10_LDO11;
226 if (ldo == MAX8998_LDO10) {
227 shift = 5;
228 mask = 0x7;
229 } else {
230 shift = 0;
231 mask = 0x1f;
232 }
233 break;
234 case MAX8998_LDO12 ... MAX8998_LDO17:
235 reg = MAX8998_REG_LDO12 + (ldo - MAX8998_LDO12);
236 break;
237 case MAX8998_BUCK1:
238 reg = MAX8998_REG_BUCK1_VOLTAGE1 + max8998->buck1_idx;
239 break;
240 case MAX8998_BUCK2:
241 reg = MAX8998_REG_BUCK2_VOLTAGE1 + max8998->buck2_idx;
242 break;
243 case MAX8998_BUCK3:
244 reg = MAX8998_REG_BUCK3;
245 break;
246 case MAX8998_BUCK4:
247 reg = MAX8998_REG_BUCK4;
248 break;
249 default:
250 return -EINVAL;
251 }
252
253 *_reg = reg;
254 *_shift = shift;
255 *_mask = mask;
256
257 return 0;
258}
259
260static int max8998_get_voltage_sel(struct regulator_dev *rdev)
261{
262 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
263 struct i2c_client *i2c = max8998->iodev->i2c;
264 int reg, shift = 0, mask, ret;
265 u8 val;
266
267 ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
268 if (ret)
269 return ret;
270
271 ret = max8998_read_reg(i2c, reg, &val);
272 if (ret)
273 return ret;
274
275 val >>= shift;
276 val &= mask;
277
278 return val;
279}
280
281static int max8998_set_voltage_ldo_sel(struct regulator_dev *rdev,
282 unsigned selector)
283{
284 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
285 struct i2c_client *i2c = max8998->iodev->i2c;
286 int reg, shift = 0, mask, ret;
287
288 ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
289 if (ret)
290 return ret;
291
292 ret = max8998_update_reg(i2c, reg, selector<<shift, mask<<shift);
293
294 return ret;
295}
296
297static inline void buck1_gpio_set(int gpio1, int gpio2, int v)
298{
299 gpio_set_value(gpio1, v & 0x1);
300 gpio_set_value(gpio2, (v >> 1) & 0x1);
301}
302
303static inline void buck2_gpio_set(int gpio, int v)
304{
305 gpio_set_value(gpio, v & 0x1);
306}
307
308static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev,
309 unsigned selector)
310{
311 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
312 struct max8998_platform_data *pdata =
313 dev_get_platdata(max8998->iodev->dev);
314 struct i2c_client *i2c = max8998->iodev->i2c;
315 int buck = rdev_get_id(rdev);
316 int reg, shift = 0, mask, ret, j;
317 static u8 buck1_last_val;
318
319 ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
320 if (ret)
321 return ret;
322
323 switch (buck) {
324 case MAX8998_BUCK1:
325 dev_dbg(max8998->dev,
326 "BUCK1, selector:%d, buck1_vol1:%d, buck1_vol2:%d\n"
327 "buck1_vol3:%d, buck1_vol4:%d\n",
328 selector, max8998->buck1_vol[0], max8998->buck1_vol[1],
329 max8998->buck1_vol[2], max8998->buck1_vol[3]);
330
331 if (gpio_is_valid(pdata->buck1_set1) &&
332 gpio_is_valid(pdata->buck1_set2)) {
333
334 /* check if requested voltage */
335 /* value is already defined */
336 for (j = 0; j < ARRAY_SIZE(max8998->buck1_vol); j++) {
337 if (max8998->buck1_vol[j] == selector) {
338 max8998->buck1_idx = j;
339 buck1_gpio_set(pdata->buck1_set1,
340 pdata->buck1_set2, j);
341 goto buck1_exit;
342 }
343 }
344
345 if (pdata->buck_voltage_lock)
346 return -EINVAL;
347
348 /* no predefine regulator found */
349 max8998->buck1_idx = (buck1_last_val % 2) + 2;
350 dev_dbg(max8998->dev, "max8998->buck1_idx:%d\n",
351 max8998->buck1_idx);
352 max8998->buck1_vol[max8998->buck1_idx] = selector;
353 ret = max8998_get_voltage_register(rdev, ®,
354 &shift,
355 &mask);
356 ret = max8998_write_reg(i2c, reg, selector);
357 buck1_gpio_set(pdata->buck1_set1,
358 pdata->buck1_set2, max8998->buck1_idx);
359 buck1_last_val++;
360buck1_exit:
361 dev_dbg(max8998->dev, "%s: SET1:%d, SET2:%d\n",
362 i2c->name, gpio_get_value(pdata->buck1_set1),
363 gpio_get_value(pdata->buck1_set2));
364 break;
365 } else {
366 ret = max8998_write_reg(i2c, reg, selector);
367 }
368 break;
369
370 case MAX8998_BUCK2:
371 dev_dbg(max8998->dev,
372 "BUCK2, selector:%d buck2_vol1:%d, buck2_vol2:%d\n",
373 selector, max8998->buck2_vol[0], max8998->buck2_vol[1]);
374 if (gpio_is_valid(pdata->buck2_set3)) {
375
376 /* check if requested voltage */
377 /* value is already defined */
378 for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) {
379 if (max8998->buck2_vol[j] == selector) {
380 max8998->buck2_idx = j;
381 buck2_gpio_set(pdata->buck2_set3, j);
382 goto buck2_exit;
383 }
384 }
385
386 if (pdata->buck_voltage_lock)
387 return -EINVAL;
388
389 max8998_get_voltage_register(rdev,
390 ®, &shift, &mask);
391 ret = max8998_write_reg(i2c, reg, selector);
392 max8998->buck2_vol[max8998->buck2_idx] = selector;
393 buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx);
394buck2_exit:
395 dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name,
396 gpio_get_value(pdata->buck2_set3));
397 } else {
398 ret = max8998_write_reg(i2c, reg, selector);
399 }
400 break;
401
402 case MAX8998_BUCK3:
403 case MAX8998_BUCK4:
404 ret = max8998_update_reg(i2c, reg, selector<<shift,
405 mask<<shift);
406 break;
407 }
408
409 return ret;
410}
411
412static int max8998_set_voltage_buck_time_sel(struct regulator_dev *rdev,
413 unsigned int old_selector,
414 unsigned int new_selector)
415{
416 struct max8998_data *max8998 = rdev_get_drvdata(rdev);
417 struct i2c_client *i2c = max8998->iodev->i2c;
418 const struct voltage_map_desc *desc;
419 int buck = rdev_get_id(rdev);
420 u8 val = 0;
421 int difference, ret;
422
423 if (buck < MAX8998_BUCK1 || buck > MAX8998_BUCK4)
424 return -EINVAL;
425
426 desc = ldo_voltage_map[buck];
427
428 /* Voltage stabilization */
429 ret = max8998_read_reg(i2c, MAX8998_REG_ONOFF4, &val);
430 if (ret)
431 return ret;
432
433 /* lp3974 hasn't got ENRAMP bit - ramp is assumed as true */
434 /* MAX8998 has ENRAMP bit implemented, so test it*/
435 if (max8998->iodev->type == TYPE_MAX8998 && !(val & MAX8998_ENRAMP))
436 return 0;
437
438 difference = (new_selector - old_selector) * desc->step / 1000;
439 if (difference > 0)
440 return DIV_ROUND_UP(difference, (val & 0x0f) + 1);
441
442 return 0;
443}
444
445static struct regulator_ops max8998_ldo_ops = {
446 .list_voltage = regulator_list_voltage_linear,
447 .map_voltage = regulator_map_voltage_linear,
448 .is_enabled = max8998_ldo_is_enabled,
449 .enable = max8998_ldo_enable,
450 .disable = max8998_ldo_disable,
451 .get_voltage_sel = max8998_get_voltage_sel,
452 .set_voltage_sel = max8998_set_voltage_ldo_sel,
453};
454
455static struct regulator_ops max8998_buck_ops = {
456 .list_voltage = regulator_list_voltage_linear,
457 .map_voltage = regulator_map_voltage_linear,
458 .is_enabled = max8998_ldo_is_enabled,
459 .enable = max8998_ldo_enable,
460 .disable = max8998_ldo_disable,
461 .get_voltage_sel = max8998_get_voltage_sel,
462 .set_voltage_sel = max8998_set_voltage_buck_sel,
463 .set_voltage_time_sel = max8998_set_voltage_buck_time_sel,
464};
465
466static struct regulator_ops max8998_others_ops = {
467 .is_enabled = max8998_ldo_is_enabled,
468 .enable = max8998_ldo_enable,
469 .disable = max8998_ldo_disable,
470};
471
472static struct regulator_desc regulators[] = {
473 {
474 .name = "LDO2",
475 .id = MAX8998_LDO2,
476 .ops = &max8998_ldo_ops,
477 .type = REGULATOR_VOLTAGE,
478 .owner = THIS_MODULE,
479 }, {
480 .name = "LDO3",
481 .id = MAX8998_LDO3,
482 .ops = &max8998_ldo_ops,
483 .type = REGULATOR_VOLTAGE,
484 .owner = THIS_MODULE,
485 }, {
486 .name = "LDO4",
487 .id = MAX8998_LDO4,
488 .ops = &max8998_ldo_ops,
489 .type = REGULATOR_VOLTAGE,
490 .owner = THIS_MODULE,
491 }, {
492 .name = "LDO5",
493 .id = MAX8998_LDO5,
494 .ops = &max8998_ldo_ops,
495 .type = REGULATOR_VOLTAGE,
496 .owner = THIS_MODULE,
497 }, {
498 .name = "LDO6",
499 .id = MAX8998_LDO6,
500 .ops = &max8998_ldo_ops,
501 .type = REGULATOR_VOLTAGE,
502 .owner = THIS_MODULE,
503 }, {
504 .name = "LDO7",
505 .id = MAX8998_LDO7,
506 .ops = &max8998_ldo_ops,
507 .type = REGULATOR_VOLTAGE,
508 .owner = THIS_MODULE,
509 }, {
510 .name = "LDO8",
511 .id = MAX8998_LDO8,
512 .ops = &max8998_ldo_ops,
513 .type = REGULATOR_VOLTAGE,
514 .owner = THIS_MODULE,
515 }, {
516 .name = "LDO9",
517 .id = MAX8998_LDO9,
518 .ops = &max8998_ldo_ops,
519 .type = REGULATOR_VOLTAGE,
520 .owner = THIS_MODULE,
521 }, {
522 .name = "LDO10",
523 .id = MAX8998_LDO10,
524 .ops = &max8998_ldo_ops,
525 .type = REGULATOR_VOLTAGE,
526 .owner = THIS_MODULE,
527 }, {
528 .name = "LDO11",
529 .id = MAX8998_LDO11,
530 .ops = &max8998_ldo_ops,
531 .type = REGULATOR_VOLTAGE,
532 .owner = THIS_MODULE,
533 }, {
534 .name = "LDO12",
535 .id = MAX8998_LDO12,
536 .ops = &max8998_ldo_ops,
537 .type = REGULATOR_VOLTAGE,
538 .owner = THIS_MODULE,
539 }, {
540 .name = "LDO13",
541 .id = MAX8998_LDO13,
542 .ops = &max8998_ldo_ops,
543 .type = REGULATOR_VOLTAGE,
544 .owner = THIS_MODULE,
545 }, {
546 .name = "LDO14",
547 .id = MAX8998_LDO14,
548 .ops = &max8998_ldo_ops,
549 .type = REGULATOR_VOLTAGE,
550 .owner = THIS_MODULE,
551 }, {
552 .name = "LDO15",
553 .id = MAX8998_LDO15,
554 .ops = &max8998_ldo_ops,
555 .type = REGULATOR_VOLTAGE,
556 .owner = THIS_MODULE,
557 }, {
558 .name = "LDO16",
559 .id = MAX8998_LDO16,
560 .ops = &max8998_ldo_ops,
561 .type = REGULATOR_VOLTAGE,
562 .owner = THIS_MODULE,
563 }, {
564 .name = "LDO17",
565 .id = MAX8998_LDO17,
566 .ops = &max8998_ldo_ops,
567 .type = REGULATOR_VOLTAGE,
568 .owner = THIS_MODULE,
569 }, {
570 .name = "BUCK1",
571 .id = MAX8998_BUCK1,
572 .ops = &max8998_buck_ops,
573 .type = REGULATOR_VOLTAGE,
574 .owner = THIS_MODULE,
575 }, {
576 .name = "BUCK2",
577 .id = MAX8998_BUCK2,
578 .ops = &max8998_buck_ops,
579 .type = REGULATOR_VOLTAGE,
580 .owner = THIS_MODULE,
581 }, {
582 .name = "BUCK3",
583 .id = MAX8998_BUCK3,
584 .ops = &max8998_buck_ops,
585 .type = REGULATOR_VOLTAGE,
586 .owner = THIS_MODULE,
587 }, {
588 .name = "BUCK4",
589 .id = MAX8998_BUCK4,
590 .ops = &max8998_buck_ops,
591 .type = REGULATOR_VOLTAGE,
592 .owner = THIS_MODULE,
593 }, {
594 .name = "EN32KHz-AP",
595 .id = MAX8998_EN32KHZ_AP,
596 .ops = &max8998_others_ops,
597 .type = REGULATOR_VOLTAGE,
598 .owner = THIS_MODULE,
599 }, {
600 .name = "EN32KHz-CP",
601 .id = MAX8998_EN32KHZ_CP,
602 .ops = &max8998_others_ops,
603 .type = REGULATOR_VOLTAGE,
604 .owner = THIS_MODULE,
605 }, {
606 .name = "ENVICHG",
607 .id = MAX8998_ENVICHG,
608 .ops = &max8998_others_ops,
609 .type = REGULATOR_VOLTAGE,
610 .owner = THIS_MODULE,
611 }, {
612 .name = "ESAFEOUT1",
613 .id = MAX8998_ESAFEOUT1,
614 .ops = &max8998_others_ops,
615 .type = REGULATOR_VOLTAGE,
616 .owner = THIS_MODULE,
617 }, {
618 .name = "ESAFEOUT2",
619 .id = MAX8998_ESAFEOUT2,
620 .ops = &max8998_others_ops,
621 .type = REGULATOR_VOLTAGE,
622 .owner = THIS_MODULE,
623 }
624};
625
626static int max8998_pmic_dt_parse_dvs_gpio(struct max8998_dev *iodev,
627 struct max8998_platform_data *pdata,
628 struct device_node *pmic_np)
629{
630 int gpio;
631
632 gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 0);
633 if (!gpio_is_valid(gpio)) {
634 dev_err(iodev->dev, "invalid buck1 gpio[0]: %d\n", gpio);
635 return -EINVAL;
636 }
637 pdata->buck1_set1 = gpio;
638
639 gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 1);
640 if (!gpio_is_valid(gpio)) {
641 dev_err(iodev->dev, "invalid buck1 gpio[1]: %d\n", gpio);
642 return -EINVAL;
643 }
644 pdata->buck1_set2 = gpio;
645
646 gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck2-dvs-gpio", 0);
647 if (!gpio_is_valid(gpio)) {
648 dev_err(iodev->dev, "invalid buck 2 gpio: %d\n", gpio);
649 return -EINVAL;
650 }
651 pdata->buck2_set3 = gpio;
652
653 return 0;
654}
655
656static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev,
657 struct max8998_platform_data *pdata)
658{
659 struct device_node *pmic_np = iodev->dev->of_node;
660 struct device_node *regulators_np, *reg_np;
661 struct max8998_regulator_data *rdata;
662 unsigned int i;
663 int ret;
664
665 regulators_np = of_get_child_by_name(pmic_np, "regulators");
666 if (!regulators_np) {
667 dev_err(iodev->dev, "could not find regulators sub-node\n");
668 return -EINVAL;
669 }
670
671 /* count the number of regulators to be supported in pmic */
672 pdata->num_regulators = of_get_child_count(regulators_np);
673
674 rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) *
675 pdata->num_regulators, GFP_KERNEL);
676 if (!rdata) {
677 of_node_put(regulators_np);
678 return -ENOMEM;
679 }
680
681 pdata->regulators = rdata;
682 for (i = 0; i < ARRAY_SIZE(regulators); ++i) {
683 reg_np = of_get_child_by_name(regulators_np,
684 regulators[i].name);
685 if (!reg_np)
686 continue;
687
688 rdata->id = regulators[i].id;
689 rdata->initdata = of_get_regulator_init_data(iodev->dev,
690 reg_np,
691 ®ulators[i]);
692 rdata->reg_node = reg_np;
693 ++rdata;
694 }
695 pdata->num_regulators = rdata - pdata->regulators;
696
697 of_node_put(reg_np);
698 of_node_put(regulators_np);
699
700 ret = max8998_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
701 if (ret)
702 return -EINVAL;
703
704 if (of_find_property(pmic_np, "max8998,pmic-buck-voltage-lock", NULL))
705 pdata->buck_voltage_lock = true;
706
707 ret = of_property_read_u32(pmic_np,
708 "max8998,pmic-buck1-default-dvs-idx",
709 &pdata->buck1_default_idx);
710 if (!ret && pdata->buck1_default_idx >= 4) {
711 pdata->buck1_default_idx = 0;
712 dev_warn(iodev->dev, "invalid value for default dvs index, using 0 instead\n");
713 }
714
715 ret = of_property_read_u32(pmic_np,
716 "max8998,pmic-buck2-default-dvs-idx",
717 &pdata->buck2_default_idx);
718 if (!ret && pdata->buck2_default_idx >= 2) {
719 pdata->buck2_default_idx = 0;
720 dev_warn(iodev->dev, "invalid value for default dvs index, using 0 instead\n");
721 }
722
723 ret = of_property_read_u32_array(pmic_np,
724 "max8998,pmic-buck1-dvs-voltage",
725 pdata->buck1_voltage,
726 ARRAY_SIZE(pdata->buck1_voltage));
727 if (ret) {
728 dev_err(iodev->dev, "buck1 voltages not specified\n");
729 return -EINVAL;
730 }
731
732 ret = of_property_read_u32_array(pmic_np,
733 "max8998,pmic-buck2-dvs-voltage",
734 pdata->buck2_voltage,
735 ARRAY_SIZE(pdata->buck2_voltage));
736 if (ret) {
737 dev_err(iodev->dev, "buck2 voltages not specified\n");
738 return -EINVAL;
739 }
740
741 return 0;
742}
743
744static int max8998_pmic_probe(struct platform_device *pdev)
745{
746 struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
747 struct max8998_platform_data *pdata = iodev->pdata;
748 struct regulator_config config = { };
749 struct regulator_dev *rdev;
750 struct max8998_data *max8998;
751 struct i2c_client *i2c;
752 int i, ret;
753 unsigned int v;
754
755 if (!pdata) {
756 dev_err(pdev->dev.parent, "No platform init data supplied\n");
757 return -ENODEV;
758 }
759
760 if (IS_ENABLED(CONFIG_OF) && iodev->dev->of_node) {
761 ret = max8998_pmic_dt_parse_pdata(iodev, pdata);
762 if (ret)
763 return ret;
764 }
765
766 max8998 = devm_kzalloc(&pdev->dev, sizeof(struct max8998_data),
767 GFP_KERNEL);
768 if (!max8998)
769 return -ENOMEM;
770
771 max8998->dev = &pdev->dev;
772 max8998->iodev = iodev;
773 max8998->num_regulators = pdata->num_regulators;
774 platform_set_drvdata(pdev, max8998);
775 i2c = max8998->iodev->i2c;
776
777 max8998->buck1_idx = pdata->buck1_default_idx;
778 max8998->buck2_idx = pdata->buck2_default_idx;
779
780 /* NOTE: */
781 /* For unused GPIO NOT marked as -1 (thereof equal to 0) WARN_ON */
782 /* will be displayed */
783
784 /* Check if MAX8998 voltage selection GPIOs are defined */
785 if (gpio_is_valid(pdata->buck1_set1) &&
786 gpio_is_valid(pdata->buck1_set2)) {
787 /* Check if SET1 is not equal to 0 */
788 if (!pdata->buck1_set1) {
789 dev_err(&pdev->dev,
790 "MAX8998 SET1 GPIO defined as 0 !\n");
791 WARN_ON(!pdata->buck1_set1);
792 return -EIO;
793 }
794 /* Check if SET2 is not equal to 0 */
795 if (!pdata->buck1_set2) {
796 dev_err(&pdev->dev,
797 "MAX8998 SET2 GPIO defined as 0 !\n");
798 WARN_ON(!pdata->buck1_set2);
799 return -EIO;
800 }
801
802 gpio_request(pdata->buck1_set1, "MAX8998 BUCK1_SET1");
803 gpio_direction_output(pdata->buck1_set1,
804 max8998->buck1_idx & 0x1);
805
806
807 gpio_request(pdata->buck1_set2, "MAX8998 BUCK1_SET2");
808 gpio_direction_output(pdata->buck1_set2,
809 (max8998->buck1_idx >> 1) & 0x1);
810
811 /* Set predefined values for BUCK1 registers */
812 for (v = 0; v < ARRAY_SIZE(pdata->buck1_voltage); ++v) {
813 i = 0;
814 while (buck12_voltage_map_desc.min +
815 buck12_voltage_map_desc.step*i
816 < pdata->buck1_voltage[v])
817 i++;
818
819 max8998->buck1_vol[v] = i;
820 ret = max8998_write_reg(i2c,
821 MAX8998_REG_BUCK1_VOLTAGE1 + v, i);
822 if (ret)
823 return ret;
824 }
825 }
826
827 if (gpio_is_valid(pdata->buck2_set3)) {
828 /* Check if SET3 is not equal to 0 */
829 if (!pdata->buck2_set3) {
830 dev_err(&pdev->dev,
831 "MAX8998 SET3 GPIO defined as 0 !\n");
832 WARN_ON(!pdata->buck2_set3);
833 return -EIO;
834 }
835 gpio_request(pdata->buck2_set3, "MAX8998 BUCK2_SET3");
836 gpio_direction_output(pdata->buck2_set3,
837 max8998->buck2_idx & 0x1);
838
839 /* Set predefined values for BUCK2 registers */
840 for (v = 0; v < ARRAY_SIZE(pdata->buck2_voltage); ++v) {
841 i = 0;
842 while (buck12_voltage_map_desc.min +
843 buck12_voltage_map_desc.step*i
844 < pdata->buck2_voltage[v])
845 i++;
846
847 max8998->buck2_vol[v] = i;
848 ret = max8998_write_reg(i2c,
849 MAX8998_REG_BUCK2_VOLTAGE1 + v, i);
850 if (ret)
851 return ret;
852 }
853 }
854
855 for (i = 0; i < pdata->num_regulators; i++) {
856 const struct voltage_map_desc *desc;
857 int id = pdata->regulators[i].id;
858 int index = id - MAX8998_LDO2;
859
860 desc = ldo_voltage_map[id];
861 if (desc && regulators[index].ops != &max8998_others_ops) {
862 int count = (desc->max - desc->min) / desc->step + 1;
863
864 regulators[index].n_voltages = count;
865 regulators[index].min_uV = desc->min;
866 regulators[index].uV_step = desc->step;
867 }
868
869 config.dev = max8998->dev;
870 config.of_node = pdata->regulators[i].reg_node;
871 config.init_data = pdata->regulators[i].initdata;
872 config.driver_data = max8998;
873
874 rdev = devm_regulator_register(&pdev->dev, ®ulators[index],
875 &config);
876 if (IS_ERR(rdev)) {
877 ret = PTR_ERR(rdev);
878 dev_err(max8998->dev, "regulator %s init failed (%d)\n",
879 regulators[index].name, ret);
880 return ret;
881 }
882 }
883
884
885 return 0;
886}
887
888static const struct platform_device_id max8998_pmic_id[] = {
889 { "max8998-pmic", TYPE_MAX8998 },
890 { "lp3974-pmic", TYPE_LP3974 },
891 { }
892};
893MODULE_DEVICE_TABLE(platform, max8998_pmic_id);
894
895static struct platform_driver max8998_pmic_driver = {
896 .driver = {
897 .name = "max8998-pmic",
898 },
899 .probe = max8998_pmic_probe,
900 .id_table = max8998_pmic_id,
901};
902
903static int __init max8998_pmic_init(void)
904{
905 return platform_driver_register(&max8998_pmic_driver);
906}
907subsys_initcall(max8998_pmic_init);
908
909static void __exit max8998_pmic_cleanup(void)
910{
911 platform_driver_unregister(&max8998_pmic_driver);
912}
913module_exit(max8998_pmic_cleanup);
914
915MODULE_DESCRIPTION("MAXIM 8998 voltage regulator driver");
916MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
917MODULE_LICENSE("GPL");