1// SPDX-License-Identifier: GPL-2.0
 2/dts-v1/;
 3
 4/include/ "rt2880.dtsi"
 5
 6/ {
 7	compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
 8	model = "Ralink RT2880 evaluation board";
 9
10	memory@0 {
11		device_type = "memory";
12		reg = <0x8000000 0x2000000>;
13	};
14
15	chosen {
16		bootargs = "console=ttyS0,57600";
17	};
18
19	cfi@1f000000 {
20		compatible = "cfi-flash";
21		reg = <0x1f000000 0x400000>;
22
23		bank-width = <2>;
24		device-width = <2>;
25		#address-cells = <1>;
26		#size-cells = <1>;
27
28		partition@0 {
29			label = "uboot";
30			reg = <0x0 0x30000>;
31			read-only;
32		};
33		partition@30000 {
34			label = "uboot-env";
35			reg = <0x30000 0x10000>;
36			read-only;
37		};
38		partition@40000 {
39			label = "calibration";
40			reg = <0x40000 0x10000>;
41			read-only;
42		};
43		partition@50000 {
44			label = "linux";
45			reg = <0x50000 0x3b0000>;
46		};
47	};
48};

 
 1/dts-v1/;
 2
 3/include/ "rt2880.dtsi"
 4
 5/ {
 6	compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
 7	model = "Ralink RT2880 evaluation board";
 8
 9	memory@0 {
10		device_type = "memory";
11		reg = <0x8000000 0x2000000>;
12	};
13
14	chosen {
15		bootargs = "console=ttyS0,57600";
16	};
17
18	cfi@1f000000 {
19		compatible = "cfi-flash";
20		reg = <0x1f000000 0x400000>;
21
22		bank-width = <2>;
23		device-width = <2>;
24		#address-cells = <1>;
25		#size-cells = <1>;
26
27		partition@0 {
28			label = "uboot";
29			reg = <0x0 0x30000>;
30			read-only;
31		};
32		partition@30000 {
33			label = "uboot-env";
34			reg = <0x30000 0x10000>;
35			read-only;
36		};
37		partition@40000 {
38			label = "calibration";
39			reg = <0x40000 0x10000>;
40			read-only;
41		};
42		partition@50000 {
43			label = "linux";
44			reg = <0x50000 0x3b0000>;
45		};
46	};
47};