Loading...
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3/dts-v1/;
4
5#include "rk3036.dtsi"
6
7/ {
8 model = "Rockchip RK3036 KylinBoard";
9 compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
10
11 memory@60000000 {
12 device_type = "memory";
13 reg = <0x60000000 0x20000000>;
14 };
15
16 leds: gpio-leds {
17 compatible = "gpio-leds";
18
19 work_led: led-0 {
20 gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
21 label = "kylin:red:led";
22 pinctrl-names = "default";
23 pinctrl-0 = <&led_ctl>;
24 };
25 };
26
27 sdio_pwrseq: sdio-pwrseq {
28 compatible = "mmc-pwrseq-simple";
29 pinctrl-names = "default";
30 pinctrl-0 = <&bt_wake_h>;
31
32 /*
33 * On the module itself this is one of these (depending
34 * on the actual card populated):
35 * - SDIO_RESET_L_WL_REG_ON
36 * - SDIO_RESET_L_WL_RST
37 * - SDIO_RESET_L_BT_EN
38 */
39 reset-gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
40 <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>, /* WL_RST */
41 <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; /* BT_EN */
42 };
43
44 sound {
45 compatible = "simple-audio-card";
46 simple-audio-card,format = "i2s";
47 simple-audio-card,name = "rockchip,rt5616-codec";
48 simple-audio-card,mclk-fs = <512>;
49 simple-audio-card,widgets =
50 "Microphone", "Microphone Jack",
51 "Headphone", "Headphone Jack";
52 simple-audio-card,routing =
53 "MIC1", "Microphone Jack",
54 "MIC2", "Microphone Jack",
55 "Microphone Jack", "micbias1",
56 "Headphone Jack", "HPOL",
57 "Headphone Jack", "HPOR";
58
59 simple-audio-card,cpu {
60 sound-dai = <&i2s>;
61 };
62
63 simple-audio-card,codec {
64 sound-dai = <&rt5616>;
65 };
66 };
67
68 vcc_sys: vsys-regulator {
69 compatible = "regulator-fixed";
70 regulator-name = "vcc_sys";
71 regulator-min-microvolt = <5000000>;
72 regulator-max-microvolt = <5000000>;
73 regulator-always-on;
74 regulator-boot-on;
75 };
76};
77
78&acodec {
79 status = "okay";
80};
81
82&emac {
83 phy = <&phy0>;
84 phy-reset-duration = <10>; /* millisecond */
85 phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
86 pinctrl-names = "default";
87 pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
88 status = "okay";
89
90 mdio {
91 #address-cells = <1>;
92 #size-cells = <0>;
93
94 phy0: ethernet-phy@0 {
95 reg = <0>;
96 };
97 };
98};
99
100&emmc {
101 status = "okay";
102};
103
104&gpu {
105 mali-supply = <&vdd_gpu>;
106 status = "okay";
107};
108
109&hdmi {
110 status = "okay";
111};
112
113&i2c1 {
114 clock-frequency = <400000>;
115
116 status = "okay";
117
118 rk808: pmic@1b {
119 compatible = "rockchip,rk808";
120 reg = <0x1b>;
121 interrupt-parent = <&gpio2>;
122 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
123 pinctrl-names = "default";
124 pinctrl-0 = <&pmic_int &global_pwroff>;
125 rockchip,system-power-controller;
126 wakeup-source;
127 #clock-cells = <1>;
128 clock-output-names = "xin32k", "rk808-clkout2";
129
130 vcc1-supply = <&vcc_sys>;
131 vcc2-supply = <&vcc_sys>;
132 vcc3-supply = <&vcc_sys>;
133 vcc4-supply = <&vcc_sys>;
134 vcc6-supply = <&vcc_sys>;
135 vcc7-supply = <&vcc_sys>;
136 vcc8-supply = <&vcc_18>;
137 vcc9-supply = <&vcc_io>;
138 vcc10-supply = <&vcc_io>;
139 vcc11-supply = <&vcc_sys>;
140 vcc12-supply = <&vcc_io>;
141 vddio-supply = <&vccio_pmu>;
142
143 regulators {
144 vdd_cpu: DCDC_REG1 {
145 regulator-always-on;
146 regulator-boot-on;
147 regulator-min-microvolt = <750000>;
148 regulator-max-microvolt = <1350000>;
149 regulator-name = "vdd_arm";
150 regulator-state-mem {
151 regulator-off-in-suspend;
152 };
153 };
154
155 vdd_gpu: DCDC_REG2 {
156 regulator-always-on;
157 regulator-boot-on;
158 regulator-min-microvolt = <850000>;
159 regulator-max-microvolt = <1250000>;
160 regulator-name = "vdd_gpu";
161 regulator-state-mem {
162 regulator-on-in-suspend;
163 regulator-suspend-microvolt = <1000000>;
164 };
165 };
166
167 vcc_ddr: DCDC_REG3 {
168 regulator-always-on;
169 regulator-boot-on;
170 regulator-name = "vcc_ddr";
171 regulator-state-mem {
172 regulator-on-in-suspend;
173 };
174 };
175
176 vcc_io: DCDC_REG4 {
177 regulator-always-on;
178 regulator-boot-on;
179 regulator-min-microvolt = <3300000>;
180 regulator-max-microvolt = <3300000>;
181 regulator-name = "vcc_io";
182 regulator-state-mem {
183 regulator-on-in-suspend;
184 regulator-suspend-microvolt = <3300000>;
185 };
186 };
187
188 vccio_pmu: LDO_REG1 {
189 regulator-always-on;
190 regulator-boot-on;
191 regulator-min-microvolt = <3300000>;
192 regulator-max-microvolt = <3300000>;
193 regulator-name = "vccio_pmu";
194 regulator-state-mem {
195 regulator-on-in-suspend;
196 regulator-suspend-microvolt = <3300000>;
197 };
198 };
199
200 vcc_tp: LDO_REG2 {
201 regulator-always-on;
202 regulator-boot-on;
203 regulator-min-microvolt = <3300000>;
204 regulator-max-microvolt = <3300000>;
205 regulator-name = "vcc_tp";
206 regulator-state-mem {
207 regulator-off-in-suspend;
208 };
209 };
210
211 vdd_10: LDO_REG3 {
212 regulator-always-on;
213 regulator-boot-on;
214 regulator-min-microvolt = <1000000>;
215 regulator-max-microvolt = <1000000>;
216 regulator-name = "vdd_10";
217 regulator-state-mem {
218 regulator-on-in-suspend;
219 regulator-suspend-microvolt = <1000000>;
220 };
221 };
222
223 vcc18_lcd: LDO_REG4 {
224 regulator-always-on;
225 regulator-boot-on;
226 regulator-min-microvolt = <1800000>;
227 regulator-max-microvolt = <1800000>;
228 regulator-name = "vcc18_lcd";
229 regulator-state-mem {
230 regulator-on-in-suspend;
231 regulator-suspend-microvolt = <1800000>;
232 };
233 };
234
235 vccio_sd: LDO_REG5 {
236 regulator-always-on;
237 regulator-boot-on;
238 regulator-min-microvolt = <1800000>;
239 regulator-max-microvolt = <3300000>;
240 regulator-name = "vccio_sd";
241 regulator-state-mem {
242 regulator-on-in-suspend;
243 regulator-suspend-microvolt = <3300000>;
244 };
245 };
246
247 vout5: LDO_REG6 {
248 regulator-always-on;
249 regulator-boot-on;
250 regulator-min-microvolt = <1800000>;
251 regulator-max-microvolt = <2500000>;
252 regulator-name = "vout5";
253 regulator-state-mem {
254 regulator-on-in-suspend;
255 regulator-suspend-microvolt = <1800000>;
256 };
257 };
258
259 vcc_18: LDO_REG7 {
260 regulator-always-on;
261 regulator-boot-on;
262 regulator-min-microvolt = <1800000>;
263 regulator-max-microvolt = <1800000>;
264 regulator-name = "vcc_18";
265 regulator-state-mem {
266 regulator-on-in-suspend;
267 regulator-suspend-microvolt = <1800000>;
268 };
269 };
270
271 vcca_codec: LDO_REG8 {
272 regulator-always-on;
273 regulator-boot-on;
274 regulator-min-microvolt = <1800000>;
275 regulator-max-microvolt = <1800000>;
276 regulator-name = "vcca_codec";
277 regulator-state-mem {
278 regulator-on-in-suspend;
279 regulator-suspend-microvolt = <1800000>;
280 };
281 };
282
283 vcc_wl: SWITCH_REG1 {
284 regulator-always-on;
285 regulator-boot-on;
286 regulator-name = "vcc_wl";
287 regulator-state-mem {
288 regulator-on-in-suspend;
289 };
290 };
291
292 vcc_lcd: SWITCH_REG2 {
293 regulator-always-on;
294 regulator-boot-on;
295 regulator-name = "vcc_lcd";
296 regulator-state-mem {
297 regulator-on-in-suspend;
298 };
299 };
300 };
301 };
302};
303
304&i2c2 {
305 status = "okay";
306
307 rt5616: rt5616@1b {
308 compatible = "rt5616";
309 reg = <0x1b>;
310 clocks = <&cru SCLK_I2S_OUT>;
311 clock-names = "mclk";
312 #sound-dai-cells = <0>;
313 };
314};
315
316&i2s {
317 status = "okay";
318};
319
320&sdio {
321 status = "okay";
322
323 bus-width = <4>;
324 cap-sd-highspeed;
325 cap-sdio-irq;
326 rockchip,default-sample-phase = <90>;
327 keep-power-in-suspend;
328 mmc-pwrseq = <&sdio_pwrseq>;
329 non-removable;
330 pinctrl-names = "default";
331 pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
332 sd-uhs-sdr12;
333 sd-uhs-sdr25;
334 sd-uhs-sdr50;
335 sd-uhs-sdr104;
336};
337
338&sdmmc {
339 bus-width = <4>;
340 cap-mmc-highspeed;
341 cap-sd-highspeed;
342 card-detect-delay = <200>;
343 disable-wp;
344 pinctrl-names = "default";
345 pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
346};
347
348&uart0 {
349 status = "okay";
350};
351
352&uart2 {
353 status = "okay";
354};
355
356&usb_host {
357 status = "okay";
358};
359
360&usb_otg {
361 status = "okay";
362};
363
364&vop {
365 status = "okay";
366};
367
368&vop_mmu {
369 status = "okay";
370};
371
372&pinctrl {
373 leds {
374 led_ctl: led-ctl {
375 rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
376 };
377 };
378
379 pmic {
380 pmic_int: pmic-int {
381 rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>;
382 };
383 };
384
385 sdio {
386 bt_wake_h: bt-wake-h {
387 rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_default>;
388 };
389 };
390
391 sdmmc {
392 sdmmc_pwr: sdmmc-pwr {
393 rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
394 };
395 };
396
397 suspend {
398 global_pwroff: global-pwroff {
399 rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
400 };
401 };
402};
1/*
2 * This file is dual-licensed: you can use it either under the terms
3 * of the GPL or the X11 license, at your option. Note that this dual
4 * licensing only applies to this file, and not this project as a
5 * whole.
6 *
7 * a) This file is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of the
10 * License, or (at your option) any later version.
11 *
12 * This file is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * Or, alternatively,
18 *
19 * b) Permission is hereby granted, free of charge, to any person
20 * obtaining a copy of this software and associated documentation
21 * files (the "Software"), to deal in the Software without
22 * restriction, including without limitation the rights to use,
23 * copy, modify, merge, publish, distribute, sublicense, and/or
24 * sell copies of the Software, and to permit persons to whom the
25 * Software is furnished to do so, subject to the following
26 * conditions:
27 *
28 * The above copyright notice and this permission notice shall be
29 * included in all copies or substantial portions of the Software.
30 *
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
32 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
33 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
34 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
35 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
36 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
37 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
38 * OTHER DEALINGS IN THE SOFTWARE.
39 */
40
41/dts-v1/;
42
43#include "rk3036.dtsi"
44
45/ {
46 model = "Rockchip RK3036 KylinBoard";
47 compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
48
49 memory@60000000 {
50 device_type = "memory";
51 reg = <0x60000000 0x20000000>;
52 };
53
54 leds: gpio-leds {
55 compatible = "gpio-leds";
56
57 work {
58 gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
59 label = "kylin:red:led";
60 pinctrl-names = "default";
61 pinctrl-0 = <&led_ctl>;
62 };
63 };
64
65 sdio_pwrseq: sdio-pwrseq {
66 compatible = "mmc-pwrseq-simple";
67 pinctrl-names = "default";
68 pinctrl-0 = <&bt_wake_h>;
69
70 /*
71 * On the module itself this is one of these (depending
72 * on the actual card populated):
73 * - SDIO_RESET_L_WL_REG_ON
74 * - SDIO_RESET_L_WL_RST
75 * - SDIO_RESET_L_BT_EN
76 */
77 reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
78 <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */
79 <&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */
80 };
81
82 sound {
83 compatible = "simple-audio-card";
84 simple-audio-card,format = "i2s";
85 simple-audio-card,name = "rockchip,rt5616-codec";
86 simple-audio-card,mclk-fs = <512>;
87 simple-audio-card,widgets =
88 "Microphone", "Microphone Jack",
89 "Headphone", "Headphone Jack";
90 simple-audio-card,routing =
91 "MIC1", "Microphone Jack",
92 "MIC2", "Microphone Jack",
93 "Microphone Jack", "micbias1",
94 "Headphone Jack", "HPOL",
95 "Headphone Jack", "HPOR";
96
97 simple-audio-card,cpu {
98 sound-dai = <&i2s>;
99 };
100
101 simple-audio-card,codec {
102 sound-dai = <&rt5616>;
103 };
104 };
105
106 vcc_sys: vsys-regulator {
107 compatible = "regulator-fixed";
108 regulator-name = "vcc_sys";
109 regulator-min-microvolt = <5000000>;
110 regulator-max-microvolt = <5000000>;
111 regulator-always-on;
112 regulator-boot-on;
113 };
114};
115
116&acodec {
117 status = "okay";
118};
119
120&emac {
121 pinctrl-names = "default";
122 pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
123 phy = <&phy0>;
124 phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
125 phy-reset-duration = <10>; /* millisecond */
126
127 status = "okay";
128
129 phy0: ethernet-phy@0 {
130 reg = <0>;
131 };
132};
133
134&emmc {
135 status = "okay";
136};
137
138&hdmi {
139 status = "okay";
140};
141
142&i2c1 {
143 clock-frequency = <400000>;
144
145 status = "okay";
146
147 rk808: pmic@1b {
148 compatible = "rockchip,rk808";
149 reg = <0x1b>;
150 interrupt-parent = <&gpio2>;
151 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
152 pinctrl-names = "default";
153 pinctrl-0 = <&pmic_int &global_pwroff>;
154 rockchip,system-power-controller;
155 wakeup-source;
156 #clock-cells = <1>;
157 clock-output-names = "xin32k", "rk808-clkout2";
158
159 vcc1-supply = <&vcc_sys>;
160 vcc2-supply = <&vcc_sys>;
161 vcc3-supply = <&vcc_sys>;
162 vcc4-supply = <&vcc_sys>;
163 vcc6-supply = <&vcc_sys>;
164 vcc7-supply = <&vcc_sys>;
165 vcc8-supply = <&vcc_18>;
166 vcc9-supply = <&vcc_io>;
167 vcc10-supply = <&vcc_io>;
168 vcc11-supply = <&vcc_sys>;
169 vcc12-supply = <&vcc_io>;
170 vddio-supply = <&vccio_pmu>;
171
172 regulators {
173 vdd_cpu: DCDC_REG1 {
174 regulator-always-on;
175 regulator-boot-on;
176 regulator-min-microvolt = <750000>;
177 regulator-max-microvolt = <1350000>;
178 regulator-name = "vdd_arm";
179 regulator-state-mem {
180 regulator-off-in-suspend;
181 };
182 };
183
184 vdd_gpu: DCDC_REG2 {
185 regulator-always-on;
186 regulator-boot-on;
187 regulator-min-microvolt = <850000>;
188 regulator-max-microvolt = <1250000>;
189 regulator-name = "vdd_gpu";
190 regulator-state-mem {
191 regulator-on-in-suspend;
192 regulator-suspend-microvolt = <1000000>;
193 };
194 };
195
196 vcc_ddr: DCDC_REG3 {
197 regulator-always-on;
198 regulator-boot-on;
199 regulator-name = "vcc_ddr";
200 regulator-state-mem {
201 regulator-on-in-suspend;
202 };
203 };
204
205 vcc_io: DCDC_REG4 {
206 regulator-always-on;
207 regulator-boot-on;
208 regulator-min-microvolt = <3300000>;
209 regulator-max-microvolt = <3300000>;
210 regulator-name = "vcc_io";
211 regulator-state-mem {
212 regulator-on-in-suspend;
213 regulator-suspend-microvolt = <3300000>;
214 };
215 };
216
217 vccio_pmu: LDO_REG1 {
218 regulator-always-on;
219 regulator-boot-on;
220 regulator-min-microvolt = <3300000>;
221 regulator-max-microvolt = <3300000>;
222 regulator-name = "vccio_pmu";
223 regulator-state-mem {
224 regulator-on-in-suspend;
225 regulator-suspend-microvolt = <3300000>;
226 };
227 };
228
229 vcc_tp: LDO_REG2 {
230 regulator-always-on;
231 regulator-boot-on;
232 regulator-min-microvolt = <3300000>;
233 regulator-max-microvolt = <3300000>;
234 regulator-name = "vcc_tp";
235 regulator-state-mem {
236 regulator-off-in-suspend;
237 };
238 };
239
240 vdd_10: LDO_REG3 {
241 regulator-always-on;
242 regulator-boot-on;
243 regulator-min-microvolt = <1000000>;
244 regulator-max-microvolt = <1000000>;
245 regulator-name = "vdd_10";
246 regulator-state-mem {
247 regulator-on-in-suspend;
248 regulator-suspend-microvolt = <1000000>;
249 };
250 };
251
252 vcc18_lcd: LDO_REG4 {
253 regulator-always-on;
254 regulator-boot-on;
255 regulator-min-microvolt = <1800000>;
256 regulator-max-microvolt = <1800000>;
257 regulator-name = "vcc18_lcd";
258 regulator-state-mem {
259 regulator-on-in-suspend;
260 regulator-suspend-microvolt = <1800000>;
261 };
262 };
263
264 vccio_sd: LDO_REG5 {
265 regulator-always-on;
266 regulator-boot-on;
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <3300000>;
269 regulator-name = "vccio_sd";
270 regulator-state-mem {
271 regulator-on-in-suspend;
272 regulator-suspend-microvolt = <3300000>;
273 };
274 };
275
276 vout5: LDO_REG6 {
277 regulator-always-on;
278 regulator-boot-on;
279 regulator-min-microvolt = <1800000>;
280 regulator-max-microvolt = <2500000>;
281 regulator-name = "vout5";
282 regulator-state-mem {
283 regulator-on-in-suspend;
284 regulator-suspend-microvolt = <1800000>;
285 };
286 };
287
288 vcc_18: LDO_REG7 {
289 regulator-always-on;
290 regulator-boot-on;
291 regulator-min-microvolt = <1800000>;
292 regulator-max-microvolt = <1800000>;
293 regulator-name = "vcc_18";
294 regulator-state-mem {
295 regulator-on-in-suspend;
296 regulator-suspend-microvolt = <1800000>;
297 };
298 };
299
300 vcca_codec: LDO_REG8 {
301 regulator-always-on;
302 regulator-boot-on;
303 regulator-min-microvolt = <1800000>;
304 regulator-max-microvolt = <1800000>;
305 regulator-name = "vcca_codec";
306 regulator-state-mem {
307 regulator-on-in-suspend;
308 regulator-suspend-microvolt = <1800000>;
309 };
310 };
311
312 vcc_wl: SWITCH_REG1 {
313 regulator-always-on;
314 regulator-boot-on;
315 regulator-name = "vcc_wl";
316 regulator-state-mem {
317 regulator-on-in-suspend;
318 };
319 };
320
321 vcc_lcd: SWITCH_REG2 {
322 regulator-always-on;
323 regulator-boot-on;
324 regulator-name = "vcc_lcd";
325 regulator-state-mem {
326 regulator-on-in-suspend;
327 };
328 };
329 };
330 };
331};
332
333&i2c2 {
334 status = "okay";
335
336 rt5616: rt5616@1b {
337 compatible = "rt5616";
338 reg = <0x1b>;
339 clocks = <&cru SCLK_I2S_OUT>;
340 clock-names = "mclk";
341 #sound-dai-cells = <0>;
342 };
343};
344
345&i2s {
346 #sound-dai-cells = <0>;
347 status = "okay";
348};
349
350&sdio {
351 status = "okay";
352
353 bus-width = <4>;
354 cap-sd-highspeed;
355 cap-sdio-irq;
356 default-sample-phase = <90>;
357 keep-power-in-suspend;
358 mmc-pwrseq = <&sdio_pwrseq>;
359 non-removable;
360 num-slots = <1>;
361 pinctrl-names = "default";
362 pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
363 sd-uhs-sdr12;
364 sd-uhs-sdr25;
365 sd-uhs-sdr50;
366 sd-uhs-sdr104;
367};
368
369&sdmmc {
370 bus-width = <4>;
371 cap-mmc-highspeed;
372 cap-sd-highspeed;
373 card-detect-delay = <200>;
374 disable-wp;
375 num-slots = <1>;
376 pinctrl-names = "default";
377 pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
378};
379
380&uart0 {
381 status = "okay";
382};
383
384&uart2 {
385 status = "okay";
386};
387
388&usb_host {
389 status = "okay";
390};
391
392&usb_otg {
393 status = "okay";
394};
395
396&vop {
397 status = "okay";
398};
399
400&vop_mmu {
401 status = "okay";
402};
403
404&pinctrl {
405 leds {
406 led_ctl: led-ctl {
407 rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>;
408 };
409 };
410
411 pmic {
412 pmic_int: pmic-int {
413 rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
414 };
415 };
416
417 sdio {
418 bt_wake_h: bt-wake-h {
419 rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>;
420 };
421 };
422
423 sdmmc {
424 sdmmc_pwr: sdmmc-pwr {
425 rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>;
426 };
427 };
428
429 sleep {
430 global_pwroff: global-pwroff {
431 rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
432 };
433 };
434};