Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Driver for GRLIB serial ports (APBUART)
4 *
5 * Based on linux/drivers/serial/amba.c
6 *
7 * Copyright (C) 2000 Deep Blue Solutions Ltd.
8 * Copyright (C) 2003 Konrad Eisele <eiselekd@web.de>
9 * Copyright (C) 2006 Daniel Hellstrom <daniel@gaisler.com>, Aeroflex Gaisler AB
10 * Copyright (C) 2008 Gilead Kutnick <kutnickg@zin-tech.com>
11 * Copyright (C) 2009 Kristoffer Glembo <kristoffer@gaisler.com>, Aeroflex Gaisler AB
12 */
13
14#include <linux/module.h>
15#include <linux/tty.h>
16#include <linux/tty_flip.h>
17#include <linux/ioport.h>
18#include <linux/init.h>
19#include <linux/serial.h>
20#include <linux/console.h>
21#include <linux/sysrq.h>
22#include <linux/kthread.h>
23#include <linux/device.h>
24#include <linux/of.h>
25#include <linux/of_device.h>
26#include <linux/of_platform.h>
27#include <linux/of_irq.h>
28#include <linux/platform_device.h>
29#include <linux/io.h>
30#include <linux/serial_core.h>
31#include <asm/irq.h>
32
33#include "apbuart.h"
34
35#define SERIAL_APBUART_MAJOR TTY_MAJOR
36#define SERIAL_APBUART_MINOR 64
37#define UART_DUMMY_RSR_RX 0x8000 /* for ignore all read */
38
39static void apbuart_tx_chars(struct uart_port *port);
40
41static void apbuart_stop_tx(struct uart_port *port)
42{
43 unsigned int cr;
44
45 cr = UART_GET_CTRL(port);
46 cr &= ~UART_CTRL_TI;
47 UART_PUT_CTRL(port, cr);
48}
49
50static void apbuart_start_tx(struct uart_port *port)
51{
52 unsigned int cr;
53
54 cr = UART_GET_CTRL(port);
55 cr |= UART_CTRL_TI;
56 UART_PUT_CTRL(port, cr);
57
58 if (UART_GET_STATUS(port) & UART_STATUS_THE)
59 apbuart_tx_chars(port);
60}
61
62static void apbuart_stop_rx(struct uart_port *port)
63{
64 unsigned int cr;
65
66 cr = UART_GET_CTRL(port);
67 cr &= ~(UART_CTRL_RI);
68 UART_PUT_CTRL(port, cr);
69}
70
71static void apbuart_rx_chars(struct uart_port *port)
72{
73 unsigned int status, ch, rsr, flag;
74 unsigned int max_chars = port->fifosize;
75
76 status = UART_GET_STATUS(port);
77
78 while (UART_RX_DATA(status) && (max_chars--)) {
79
80 ch = UART_GET_CHAR(port);
81 flag = TTY_NORMAL;
82
83 port->icount.rx++;
84
85 rsr = UART_GET_STATUS(port) | UART_DUMMY_RSR_RX;
86 UART_PUT_STATUS(port, 0);
87 if (rsr & UART_STATUS_ERR) {
88
89 if (rsr & UART_STATUS_BR) {
90 rsr &= ~(UART_STATUS_FE | UART_STATUS_PE);
91 port->icount.brk++;
92 if (uart_handle_break(port))
93 goto ignore_char;
94 } else if (rsr & UART_STATUS_PE) {
95 port->icount.parity++;
96 } else if (rsr & UART_STATUS_FE) {
97 port->icount.frame++;
98 }
99 if (rsr & UART_STATUS_OE)
100 port->icount.overrun++;
101
102 rsr &= port->read_status_mask;
103
104 if (rsr & UART_STATUS_PE)
105 flag = TTY_PARITY;
106 else if (rsr & UART_STATUS_FE)
107 flag = TTY_FRAME;
108 }
109
110 if (uart_handle_sysrq_char(port, ch))
111 goto ignore_char;
112
113 uart_insert_char(port, rsr, UART_STATUS_OE, ch, flag);
114
115
116 ignore_char:
117 status = UART_GET_STATUS(port);
118 }
119
120 tty_flip_buffer_push(&port->state->port);
121}
122
123static void apbuart_tx_chars(struct uart_port *port)
124{
125 u8 ch;
126
127 uart_port_tx_limited(port, ch, port->fifosize >> 1,
128 true,
129 UART_PUT_CHAR(port, ch),
130 ({}));
131}
132
133static irqreturn_t apbuart_int(int irq, void *dev_id)
134{
135 struct uart_port *port = dev_id;
136 unsigned int status;
137
138 spin_lock(&port->lock);
139
140 status = UART_GET_STATUS(port);
141 if (status & UART_STATUS_DR)
142 apbuart_rx_chars(port);
143 if (status & UART_STATUS_THE)
144 apbuart_tx_chars(port);
145
146 spin_unlock(&port->lock);
147
148 return IRQ_HANDLED;
149}
150
151static unsigned int apbuart_tx_empty(struct uart_port *port)
152{
153 unsigned int status = UART_GET_STATUS(port);
154 return status & UART_STATUS_THE ? TIOCSER_TEMT : 0;
155}
156
157static unsigned int apbuart_get_mctrl(struct uart_port *port)
158{
159 /* The GRLIB APBUART handles flow control in hardware */
160 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
161}
162
163static void apbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
164{
165 /* The GRLIB APBUART handles flow control in hardware */
166}
167
168static void apbuart_break_ctl(struct uart_port *port, int break_state)
169{
170 /* We don't support sending break */
171}
172
173static int apbuart_startup(struct uart_port *port)
174{
175 int retval;
176 unsigned int cr;
177
178 /* Allocate the IRQ */
179 retval = request_irq(port->irq, apbuart_int, 0, "apbuart", port);
180 if (retval)
181 return retval;
182
183 /* Finally, enable interrupts */
184 cr = UART_GET_CTRL(port);
185 UART_PUT_CTRL(port,
186 cr | UART_CTRL_RE | UART_CTRL_TE |
187 UART_CTRL_RI | UART_CTRL_TI);
188
189 return 0;
190}
191
192static void apbuart_shutdown(struct uart_port *port)
193{
194 unsigned int cr;
195
196 /* disable all interrupts, disable the port */
197 cr = UART_GET_CTRL(port);
198 UART_PUT_CTRL(port,
199 cr & ~(UART_CTRL_RE | UART_CTRL_TE |
200 UART_CTRL_RI | UART_CTRL_TI));
201
202 /* Free the interrupt */
203 free_irq(port->irq, port);
204}
205
206static void apbuart_set_termios(struct uart_port *port,
207 struct ktermios *termios, const struct ktermios *old)
208{
209 unsigned int cr;
210 unsigned long flags;
211 unsigned int baud, quot;
212
213 /* Ask the core to calculate the divisor for us. */
214 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
215 if (baud == 0)
216 panic("invalid baudrate %i\n", port->uartclk / 16);
217
218 /* uart_get_divisor calc a *16 uart freq, apbuart is *8 */
219 quot = (uart_get_divisor(port, baud)) * 2;
220 cr = UART_GET_CTRL(port);
221 cr &= ~(UART_CTRL_PE | UART_CTRL_PS);
222
223 if (termios->c_cflag & PARENB) {
224 cr |= UART_CTRL_PE;
225 if ((termios->c_cflag & PARODD))
226 cr |= UART_CTRL_PS;
227 }
228
229 /* Enable flow control. */
230 if (termios->c_cflag & CRTSCTS)
231 cr |= UART_CTRL_FL;
232
233 spin_lock_irqsave(&port->lock, flags);
234
235 /* Update the per-port timeout. */
236 uart_update_timeout(port, termios->c_cflag, baud);
237
238 port->read_status_mask = UART_STATUS_OE;
239 if (termios->c_iflag & INPCK)
240 port->read_status_mask |= UART_STATUS_FE | UART_STATUS_PE;
241
242 /* Characters to ignore */
243 port->ignore_status_mask = 0;
244 if (termios->c_iflag & IGNPAR)
245 port->ignore_status_mask |= UART_STATUS_FE | UART_STATUS_PE;
246
247 /* Ignore all characters if CREAD is not set. */
248 if ((termios->c_cflag & CREAD) == 0)
249 port->ignore_status_mask |= UART_DUMMY_RSR_RX;
250
251 /* Set baud rate */
252 quot -= 1;
253 UART_PUT_SCAL(port, quot);
254 UART_PUT_CTRL(port, cr);
255
256 spin_unlock_irqrestore(&port->lock, flags);
257}
258
259static const char *apbuart_type(struct uart_port *port)
260{
261 return port->type == PORT_APBUART ? "GRLIB/APBUART" : NULL;
262}
263
264static void apbuart_release_port(struct uart_port *port)
265{
266 release_mem_region(port->mapbase, 0x100);
267}
268
269static int apbuart_request_port(struct uart_port *port)
270{
271 return request_mem_region(port->mapbase, 0x100, "grlib-apbuart")
272 != NULL ? 0 : -EBUSY;
273 return 0;
274}
275
276/* Configure/autoconfigure the port */
277static void apbuart_config_port(struct uart_port *port, int flags)
278{
279 if (flags & UART_CONFIG_TYPE) {
280 port->type = PORT_APBUART;
281 apbuart_request_port(port);
282 }
283}
284
285/* Verify the new serial_struct (for TIOCSSERIAL) */
286static int apbuart_verify_port(struct uart_port *port,
287 struct serial_struct *ser)
288{
289 int ret = 0;
290 if (ser->type != PORT_UNKNOWN && ser->type != PORT_APBUART)
291 ret = -EINVAL;
292 if (ser->irq < 0 || ser->irq >= NR_IRQS)
293 ret = -EINVAL;
294 if (ser->baud_base < 9600)
295 ret = -EINVAL;
296 return ret;
297}
298
299static const struct uart_ops grlib_apbuart_ops = {
300 .tx_empty = apbuart_tx_empty,
301 .set_mctrl = apbuart_set_mctrl,
302 .get_mctrl = apbuart_get_mctrl,
303 .stop_tx = apbuart_stop_tx,
304 .start_tx = apbuart_start_tx,
305 .stop_rx = apbuart_stop_rx,
306 .break_ctl = apbuart_break_ctl,
307 .startup = apbuart_startup,
308 .shutdown = apbuart_shutdown,
309 .set_termios = apbuart_set_termios,
310 .type = apbuart_type,
311 .release_port = apbuart_release_port,
312 .request_port = apbuart_request_port,
313 .config_port = apbuart_config_port,
314 .verify_port = apbuart_verify_port,
315};
316
317static struct uart_port grlib_apbuart_ports[UART_NR];
318static struct device_node *grlib_apbuart_nodes[UART_NR];
319
320static int apbuart_scan_fifo_size(struct uart_port *port, int portnumber)
321{
322 int ctrl, loop = 0;
323 int status;
324 int fifosize;
325 unsigned long flags;
326
327 ctrl = UART_GET_CTRL(port);
328
329 /*
330 * Enable the transceiver and wait for it to be ready to send data.
331 * Clear interrupts so that this process will not be externally
332 * interrupted in the middle (which can cause the transceiver to
333 * drain prematurely).
334 */
335
336 local_irq_save(flags);
337
338 UART_PUT_CTRL(port, ctrl | UART_CTRL_TE);
339
340 while (!UART_TX_READY(UART_GET_STATUS(port)))
341 loop++;
342
343 /*
344 * Disable the transceiver so data isn't actually sent during the
345 * actual test.
346 */
347
348 UART_PUT_CTRL(port, ctrl & ~(UART_CTRL_TE));
349
350 fifosize = 1;
351 UART_PUT_CHAR(port, 0);
352
353 /*
354 * So long as transmitting a character increments the tranceivier FIFO
355 * length the FIFO must be at least that big. These bytes will
356 * automatically drain off of the FIFO.
357 */
358
359 status = UART_GET_STATUS(port);
360 while (((status >> 20) & 0x3F) == fifosize) {
361 fifosize++;
362 UART_PUT_CHAR(port, 0);
363 status = UART_GET_STATUS(port);
364 }
365
366 fifosize--;
367
368 UART_PUT_CTRL(port, ctrl);
369 local_irq_restore(flags);
370
371 if (fifosize == 0)
372 fifosize = 1;
373
374 return fifosize;
375}
376
377static void apbuart_flush_fifo(struct uart_port *port)
378{
379 int i;
380
381 for (i = 0; i < port->fifosize; i++)
382 UART_GET_CHAR(port);
383}
384
385
386/* ======================================================================== */
387/* Console driver, if enabled */
388/* ======================================================================== */
389
390#ifdef CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
391
392static void apbuart_console_putchar(struct uart_port *port, unsigned char ch)
393{
394 unsigned int status;
395 do {
396 status = UART_GET_STATUS(port);
397 } while (!UART_TX_READY(status));
398 UART_PUT_CHAR(port, ch);
399}
400
401static void
402apbuart_console_write(struct console *co, const char *s, unsigned int count)
403{
404 struct uart_port *port = &grlib_apbuart_ports[co->index];
405 unsigned int status, old_cr, new_cr;
406
407 /* First save the CR then disable the interrupts */
408 old_cr = UART_GET_CTRL(port);
409 new_cr = old_cr & ~(UART_CTRL_RI | UART_CTRL_TI);
410 UART_PUT_CTRL(port, new_cr);
411
412 uart_console_write(port, s, count, apbuart_console_putchar);
413
414 /*
415 * Finally, wait for transmitter to become empty
416 * and restore the TCR
417 */
418 do {
419 status = UART_GET_STATUS(port);
420 } while (!UART_TX_READY(status));
421 UART_PUT_CTRL(port, old_cr);
422}
423
424static void __init
425apbuart_console_get_options(struct uart_port *port, int *baud,
426 int *parity, int *bits)
427{
428 if (UART_GET_CTRL(port) & (UART_CTRL_RE | UART_CTRL_TE)) {
429
430 unsigned int quot, status;
431 status = UART_GET_STATUS(port);
432
433 *parity = 'n';
434 if (status & UART_CTRL_PE) {
435 if ((status & UART_CTRL_PS) == 0)
436 *parity = 'e';
437 else
438 *parity = 'o';
439 }
440
441 *bits = 8;
442 quot = UART_GET_SCAL(port) / 8;
443 *baud = port->uartclk / (16 * (quot + 1));
444 }
445}
446
447static int __init apbuart_console_setup(struct console *co, char *options)
448{
449 struct uart_port *port;
450 int baud = 38400;
451 int bits = 8;
452 int parity = 'n';
453 int flow = 'n';
454
455 pr_debug("apbuart_console_setup co=%p, co->index=%i, options=%s\n",
456 co, co->index, options);
457
458 /*
459 * Check whether an invalid uart number has been specified, and
460 * if so, search for the first available port that does have
461 * console support.
462 */
463 if (co->index >= grlib_apbuart_port_nr)
464 co->index = 0;
465
466 port = &grlib_apbuart_ports[co->index];
467
468 spin_lock_init(&port->lock);
469
470 if (options)
471 uart_parse_options(options, &baud, &parity, &bits, &flow);
472 else
473 apbuart_console_get_options(port, &baud, &parity, &bits);
474
475 return uart_set_options(port, co, baud, parity, bits, flow);
476}
477
478static struct uart_driver grlib_apbuart_driver;
479
480static struct console grlib_apbuart_console = {
481 .name = "ttyS",
482 .write = apbuart_console_write,
483 .device = uart_console_device,
484 .setup = apbuart_console_setup,
485 .flags = CON_PRINTBUFFER,
486 .index = -1,
487 .data = &grlib_apbuart_driver,
488};
489
490
491static int grlib_apbuart_configure(void);
492
493static int __init apbuart_console_init(void)
494{
495 if (grlib_apbuart_configure())
496 return -ENODEV;
497 register_console(&grlib_apbuart_console);
498 return 0;
499}
500
501console_initcall(apbuart_console_init);
502
503#define APBUART_CONSOLE (&grlib_apbuart_console)
504#else
505#define APBUART_CONSOLE NULL
506#endif
507
508static struct uart_driver grlib_apbuart_driver = {
509 .owner = THIS_MODULE,
510 .driver_name = "serial",
511 .dev_name = "ttyS",
512 .major = SERIAL_APBUART_MAJOR,
513 .minor = SERIAL_APBUART_MINOR,
514 .nr = UART_NR,
515 .cons = APBUART_CONSOLE,
516};
517
518
519/* ======================================================================== */
520/* OF Platform Driver */
521/* ======================================================================== */
522
523static int apbuart_probe(struct platform_device *op)
524{
525 int i;
526 struct uart_port *port = NULL;
527
528 for (i = 0; i < grlib_apbuart_port_nr; i++) {
529 if (op->dev.of_node == grlib_apbuart_nodes[i])
530 break;
531 }
532
533 port = &grlib_apbuart_ports[i];
534 port->dev = &op->dev;
535 port->irq = op->archdata.irqs[0];
536
537 uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port);
538
539 apbuart_flush_fifo((struct uart_port *) port);
540
541 printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n",
542 (unsigned long long) port->mapbase, port->irq);
543 return 0;
544}
545
546static const struct of_device_id apbuart_match[] = {
547 {
548 .name = "GAISLER_APBUART",
549 },
550 {
551 .name = "01_00c",
552 },
553 {},
554};
555MODULE_DEVICE_TABLE(of, apbuart_match);
556
557static struct platform_driver grlib_apbuart_of_driver = {
558 .probe = apbuart_probe,
559 .driver = {
560 .name = "grlib-apbuart",
561 .of_match_table = apbuart_match,
562 },
563};
564
565
566static int __init grlib_apbuart_configure(void)
567{
568 struct device_node *np;
569 int line = 0;
570
571 for_each_matching_node(np, apbuart_match) {
572 const int *ampopts;
573 const u32 *freq_hz;
574 const struct amba_prom_registers *regs;
575 struct uart_port *port;
576 unsigned long addr;
577
578 ampopts = of_get_property(np, "ampopts", NULL);
579 if (ampopts && (*ampopts == 0))
580 continue; /* Ignore if used by another OS instance */
581 regs = of_get_property(np, "reg", NULL);
582 /* Frequency of APB Bus is frequency of UART */
583 freq_hz = of_get_property(np, "freq", NULL);
584
585 if (!regs || !freq_hz || (*freq_hz == 0))
586 continue;
587
588 grlib_apbuart_nodes[line] = np;
589
590 addr = regs->phys_addr;
591
592 port = &grlib_apbuart_ports[line];
593
594 port->mapbase = addr;
595 port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map));
596 port->irq = 0;
597 port->iotype = UPIO_MEM;
598 port->ops = &grlib_apbuart_ops;
599 port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE);
600 port->flags = UPF_BOOT_AUTOCONF;
601 port->line = line;
602 port->uartclk = *freq_hz;
603 port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line);
604 line++;
605
606 /* We support maximum UART_NR uarts ... */
607 if (line == UART_NR)
608 break;
609 }
610
611 grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line;
612 return line ? 0 : -ENODEV;
613}
614
615static int __init grlib_apbuart_init(void)
616{
617 int ret;
618
619 /* Find all APBUARTS in device the tree and initialize their ports */
620 ret = grlib_apbuart_configure();
621 if (ret)
622 return ret;
623
624 printk(KERN_INFO "Serial: GRLIB APBUART driver\n");
625
626 ret = uart_register_driver(&grlib_apbuart_driver);
627
628 if (ret) {
629 printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
630 __FILE__, ret);
631 return ret;
632 }
633
634 ret = platform_driver_register(&grlib_apbuart_of_driver);
635 if (ret) {
636 printk(KERN_ERR
637 "%s: platform_driver_register failed (%i)\n",
638 __FILE__, ret);
639 uart_unregister_driver(&grlib_apbuart_driver);
640 return ret;
641 }
642
643 return ret;
644}
645
646static void __exit grlib_apbuart_exit(void)
647{
648 int i;
649
650 for (i = 0; i < grlib_apbuart_port_nr; i++)
651 uart_remove_one_port(&grlib_apbuart_driver,
652 &grlib_apbuart_ports[i]);
653
654 uart_unregister_driver(&grlib_apbuart_driver);
655 platform_driver_unregister(&grlib_apbuart_of_driver);
656}
657
658module_init(grlib_apbuart_init);
659module_exit(grlib_apbuart_exit);
660
661MODULE_AUTHOR("Aeroflex Gaisler AB");
662MODULE_DESCRIPTION("GRLIB APBUART serial driver");
663MODULE_VERSION("2.1");
664MODULE_LICENSE("GPL");
1/*
2 * Driver for GRLIB serial ports (APBUART)
3 *
4 * Based on linux/drivers/serial/amba.c
5 *
6 * Copyright (C) 2000 Deep Blue Solutions Ltd.
7 * Copyright (C) 2003 Konrad Eisele <eiselekd@web.de>
8 * Copyright (C) 2006 Daniel Hellstrom <daniel@gaisler.com>, Aeroflex Gaisler AB
9 * Copyright (C) 2008 Gilead Kutnick <kutnickg@zin-tech.com>
10 * Copyright (C) 2009 Kristoffer Glembo <kristoffer@gaisler.com>, Aeroflex Gaisler AB
11 */
12
13#if defined(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
14#define SUPPORT_SYSRQ
15#endif
16
17#include <linux/module.h>
18#include <linux/tty.h>
19#include <linux/tty_flip.h>
20#include <linux/ioport.h>
21#include <linux/init.h>
22#include <linux/serial.h>
23#include <linux/console.h>
24#include <linux/sysrq.h>
25#include <linux/kthread.h>
26#include <linux/device.h>
27#include <linux/of.h>
28#include <linux/of_device.h>
29#include <linux/of_platform.h>
30#include <linux/of_irq.h>
31#include <linux/platform_device.h>
32#include <linux/io.h>
33#include <linux/serial_core.h>
34#include <asm/irq.h>
35
36#include "apbuart.h"
37
38#define SERIAL_APBUART_MAJOR TTY_MAJOR
39#define SERIAL_APBUART_MINOR 64
40#define UART_DUMMY_RSR_RX 0x8000 /* for ignore all read */
41
42static void apbuart_tx_chars(struct uart_port *port);
43
44static void apbuart_stop_tx(struct uart_port *port)
45{
46 unsigned int cr;
47
48 cr = UART_GET_CTRL(port);
49 cr &= ~UART_CTRL_TI;
50 UART_PUT_CTRL(port, cr);
51}
52
53static void apbuart_start_tx(struct uart_port *port)
54{
55 unsigned int cr;
56
57 cr = UART_GET_CTRL(port);
58 cr |= UART_CTRL_TI;
59 UART_PUT_CTRL(port, cr);
60
61 if (UART_GET_STATUS(port) & UART_STATUS_THE)
62 apbuart_tx_chars(port);
63}
64
65static void apbuart_stop_rx(struct uart_port *port)
66{
67 unsigned int cr;
68
69 cr = UART_GET_CTRL(port);
70 cr &= ~(UART_CTRL_RI);
71 UART_PUT_CTRL(port, cr);
72}
73
74static void apbuart_enable_ms(struct uart_port *port)
75{
76 /* No modem status change interrupts for APBUART */
77}
78
79static void apbuart_rx_chars(struct uart_port *port)
80{
81 struct tty_struct *tty = port->state->port.tty;
82 unsigned int status, ch, rsr, flag;
83 unsigned int max_chars = port->fifosize;
84
85 status = UART_GET_STATUS(port);
86
87 while (UART_RX_DATA(status) && (max_chars--)) {
88
89 ch = UART_GET_CHAR(port);
90 flag = TTY_NORMAL;
91
92 port->icount.rx++;
93
94 rsr = UART_GET_STATUS(port) | UART_DUMMY_RSR_RX;
95 UART_PUT_STATUS(port, 0);
96 if (rsr & UART_STATUS_ERR) {
97
98 if (rsr & UART_STATUS_BR) {
99 rsr &= ~(UART_STATUS_FE | UART_STATUS_PE);
100 port->icount.brk++;
101 if (uart_handle_break(port))
102 goto ignore_char;
103 } else if (rsr & UART_STATUS_PE) {
104 port->icount.parity++;
105 } else if (rsr & UART_STATUS_FE) {
106 port->icount.frame++;
107 }
108 if (rsr & UART_STATUS_OE)
109 port->icount.overrun++;
110
111 rsr &= port->read_status_mask;
112
113 if (rsr & UART_STATUS_PE)
114 flag = TTY_PARITY;
115 else if (rsr & UART_STATUS_FE)
116 flag = TTY_FRAME;
117 }
118
119 if (uart_handle_sysrq_char(port, ch))
120 goto ignore_char;
121
122 uart_insert_char(port, rsr, UART_STATUS_OE, ch, flag);
123
124
125 ignore_char:
126 status = UART_GET_STATUS(port);
127 }
128
129 tty_flip_buffer_push(tty);
130}
131
132static void apbuart_tx_chars(struct uart_port *port)
133{
134 struct circ_buf *xmit = &port->state->xmit;
135 int count;
136
137 if (port->x_char) {
138 UART_PUT_CHAR(port, port->x_char);
139 port->icount.tx++;
140 port->x_char = 0;
141 return;
142 }
143
144 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
145 apbuart_stop_tx(port);
146 return;
147 }
148
149 /* amba: fill FIFO */
150 count = port->fifosize >> 1;
151 do {
152 UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
153 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
154 port->icount.tx++;
155 if (uart_circ_empty(xmit))
156 break;
157 } while (--count > 0);
158
159 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
160 uart_write_wakeup(port);
161
162 if (uart_circ_empty(xmit))
163 apbuart_stop_tx(port);
164}
165
166static irqreturn_t apbuart_int(int irq, void *dev_id)
167{
168 struct uart_port *port = dev_id;
169 unsigned int status;
170
171 spin_lock(&port->lock);
172
173 status = UART_GET_STATUS(port);
174 if (status & UART_STATUS_DR)
175 apbuart_rx_chars(port);
176 if (status & UART_STATUS_THE)
177 apbuart_tx_chars(port);
178
179 spin_unlock(&port->lock);
180
181 return IRQ_HANDLED;
182}
183
184static unsigned int apbuart_tx_empty(struct uart_port *port)
185{
186 unsigned int status = UART_GET_STATUS(port);
187 return status & UART_STATUS_THE ? TIOCSER_TEMT : 0;
188}
189
190static unsigned int apbuart_get_mctrl(struct uart_port *port)
191{
192 /* The GRLIB APBUART handles flow control in hardware */
193 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
194}
195
196static void apbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
197{
198 /* The GRLIB APBUART handles flow control in hardware */
199}
200
201static void apbuart_break_ctl(struct uart_port *port, int break_state)
202{
203 /* We don't support sending break */
204}
205
206static int apbuart_startup(struct uart_port *port)
207{
208 int retval;
209 unsigned int cr;
210
211 /* Allocate the IRQ */
212 retval = request_irq(port->irq, apbuart_int, 0, "apbuart", port);
213 if (retval)
214 return retval;
215
216 /* Finally, enable interrupts */
217 cr = UART_GET_CTRL(port);
218 UART_PUT_CTRL(port,
219 cr | UART_CTRL_RE | UART_CTRL_TE |
220 UART_CTRL_RI | UART_CTRL_TI);
221
222 return 0;
223}
224
225static void apbuart_shutdown(struct uart_port *port)
226{
227 unsigned int cr;
228
229 /* disable all interrupts, disable the port */
230 cr = UART_GET_CTRL(port);
231 UART_PUT_CTRL(port,
232 cr & ~(UART_CTRL_RE | UART_CTRL_TE |
233 UART_CTRL_RI | UART_CTRL_TI));
234
235 /* Free the interrupt */
236 free_irq(port->irq, port);
237}
238
239static void apbuart_set_termios(struct uart_port *port,
240 struct ktermios *termios, struct ktermios *old)
241{
242 unsigned int cr;
243 unsigned long flags;
244 unsigned int baud, quot;
245
246 /* Ask the core to calculate the divisor for us. */
247 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
248 if (baud == 0)
249 panic("invalid baudrate %i\n", port->uartclk / 16);
250
251 /* uart_get_divisor calc a *16 uart freq, apbuart is *8 */
252 quot = (uart_get_divisor(port, baud)) * 2;
253 cr = UART_GET_CTRL(port);
254 cr &= ~(UART_CTRL_PE | UART_CTRL_PS);
255
256 if (termios->c_cflag & PARENB) {
257 cr |= UART_CTRL_PE;
258 if ((termios->c_cflag & PARODD))
259 cr |= UART_CTRL_PS;
260 }
261
262 /* Enable flow control. */
263 if (termios->c_cflag & CRTSCTS)
264 cr |= UART_CTRL_FL;
265
266 spin_lock_irqsave(&port->lock, flags);
267
268 /* Update the per-port timeout. */
269 uart_update_timeout(port, termios->c_cflag, baud);
270
271 port->read_status_mask = UART_STATUS_OE;
272 if (termios->c_iflag & INPCK)
273 port->read_status_mask |= UART_STATUS_FE | UART_STATUS_PE;
274
275 /* Characters to ignore */
276 port->ignore_status_mask = 0;
277 if (termios->c_iflag & IGNPAR)
278 port->ignore_status_mask |= UART_STATUS_FE | UART_STATUS_PE;
279
280 /* Ignore all characters if CREAD is not set. */
281 if ((termios->c_cflag & CREAD) == 0)
282 port->ignore_status_mask |= UART_DUMMY_RSR_RX;
283
284 /* Set baud rate */
285 quot -= 1;
286 UART_PUT_SCAL(port, quot);
287 UART_PUT_CTRL(port, cr);
288
289 spin_unlock_irqrestore(&port->lock, flags);
290}
291
292static const char *apbuart_type(struct uart_port *port)
293{
294 return port->type == PORT_APBUART ? "GRLIB/APBUART" : NULL;
295}
296
297static void apbuart_release_port(struct uart_port *port)
298{
299 release_mem_region(port->mapbase, 0x100);
300}
301
302static int apbuart_request_port(struct uart_port *port)
303{
304 return request_mem_region(port->mapbase, 0x100, "grlib-apbuart")
305 != NULL ? 0 : -EBUSY;
306 return 0;
307}
308
309/* Configure/autoconfigure the port */
310static void apbuart_config_port(struct uart_port *port, int flags)
311{
312 if (flags & UART_CONFIG_TYPE) {
313 port->type = PORT_APBUART;
314 apbuart_request_port(port);
315 }
316}
317
318/* Verify the new serial_struct (for TIOCSSERIAL) */
319static int apbuart_verify_port(struct uart_port *port,
320 struct serial_struct *ser)
321{
322 int ret = 0;
323 if (ser->type != PORT_UNKNOWN && ser->type != PORT_APBUART)
324 ret = -EINVAL;
325 if (ser->irq < 0 || ser->irq >= NR_IRQS)
326 ret = -EINVAL;
327 if (ser->baud_base < 9600)
328 ret = -EINVAL;
329 return ret;
330}
331
332static struct uart_ops grlib_apbuart_ops = {
333 .tx_empty = apbuart_tx_empty,
334 .set_mctrl = apbuart_set_mctrl,
335 .get_mctrl = apbuart_get_mctrl,
336 .stop_tx = apbuart_stop_tx,
337 .start_tx = apbuart_start_tx,
338 .stop_rx = apbuart_stop_rx,
339 .enable_ms = apbuart_enable_ms,
340 .break_ctl = apbuart_break_ctl,
341 .startup = apbuart_startup,
342 .shutdown = apbuart_shutdown,
343 .set_termios = apbuart_set_termios,
344 .type = apbuart_type,
345 .release_port = apbuart_release_port,
346 .request_port = apbuart_request_port,
347 .config_port = apbuart_config_port,
348 .verify_port = apbuart_verify_port,
349};
350
351static struct uart_port grlib_apbuart_ports[UART_NR];
352static struct device_node *grlib_apbuart_nodes[UART_NR];
353
354static int apbuart_scan_fifo_size(struct uart_port *port, int portnumber)
355{
356 int ctrl, loop = 0;
357 int status;
358 int fifosize;
359 unsigned long flags;
360
361 ctrl = UART_GET_CTRL(port);
362
363 /*
364 * Enable the transceiver and wait for it to be ready to send data.
365 * Clear interrupts so that this process will not be externally
366 * interrupted in the middle (which can cause the transceiver to
367 * drain prematurely).
368 */
369
370 local_irq_save(flags);
371
372 UART_PUT_CTRL(port, ctrl | UART_CTRL_TE);
373
374 while (!UART_TX_READY(UART_GET_STATUS(port)))
375 loop++;
376
377 /*
378 * Disable the transceiver so data isn't actually sent during the
379 * actual test.
380 */
381
382 UART_PUT_CTRL(port, ctrl & ~(UART_CTRL_TE));
383
384 fifosize = 1;
385 UART_PUT_CHAR(port, 0);
386
387 /*
388 * So long as transmitting a character increments the tranceivier FIFO
389 * length the FIFO must be at least that big. These bytes will
390 * automatically drain off of the FIFO.
391 */
392
393 status = UART_GET_STATUS(port);
394 while (((status >> 20) & 0x3F) == fifosize) {
395 fifosize++;
396 UART_PUT_CHAR(port, 0);
397 status = UART_GET_STATUS(port);
398 }
399
400 fifosize--;
401
402 UART_PUT_CTRL(port, ctrl);
403 local_irq_restore(flags);
404
405 if (fifosize == 0)
406 fifosize = 1;
407
408 return fifosize;
409}
410
411static void apbuart_flush_fifo(struct uart_port *port)
412{
413 int i;
414
415 for (i = 0; i < port->fifosize; i++)
416 UART_GET_CHAR(port);
417}
418
419
420/* ======================================================================== */
421/* Console driver, if enabled */
422/* ======================================================================== */
423
424#ifdef CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
425
426static void apbuart_console_putchar(struct uart_port *port, int ch)
427{
428 unsigned int status;
429 do {
430 status = UART_GET_STATUS(port);
431 } while (!UART_TX_READY(status));
432 UART_PUT_CHAR(port, ch);
433}
434
435static void
436apbuart_console_write(struct console *co, const char *s, unsigned int count)
437{
438 struct uart_port *port = &grlib_apbuart_ports[co->index];
439 unsigned int status, old_cr, new_cr;
440
441 /* First save the CR then disable the interrupts */
442 old_cr = UART_GET_CTRL(port);
443 new_cr = old_cr & ~(UART_CTRL_RI | UART_CTRL_TI);
444 UART_PUT_CTRL(port, new_cr);
445
446 uart_console_write(port, s, count, apbuart_console_putchar);
447
448 /*
449 * Finally, wait for transmitter to become empty
450 * and restore the TCR
451 */
452 do {
453 status = UART_GET_STATUS(port);
454 } while (!UART_TX_READY(status));
455 UART_PUT_CTRL(port, old_cr);
456}
457
458static void __init
459apbuart_console_get_options(struct uart_port *port, int *baud,
460 int *parity, int *bits)
461{
462 if (UART_GET_CTRL(port) & (UART_CTRL_RE | UART_CTRL_TE)) {
463
464 unsigned int quot, status;
465 status = UART_GET_STATUS(port);
466
467 *parity = 'n';
468 if (status & UART_CTRL_PE) {
469 if ((status & UART_CTRL_PS) == 0)
470 *parity = 'e';
471 else
472 *parity = 'o';
473 }
474
475 *bits = 8;
476 quot = UART_GET_SCAL(port) / 8;
477 *baud = port->uartclk / (16 * (quot + 1));
478 }
479}
480
481static int __init apbuart_console_setup(struct console *co, char *options)
482{
483 struct uart_port *port;
484 int baud = 38400;
485 int bits = 8;
486 int parity = 'n';
487 int flow = 'n';
488
489 pr_debug("apbuart_console_setup co=%p, co->index=%i, options=%s\n",
490 co, co->index, options);
491
492 /*
493 * Check whether an invalid uart number has been specified, and
494 * if so, search for the first available port that does have
495 * console support.
496 */
497 if (co->index >= grlib_apbuart_port_nr)
498 co->index = 0;
499
500 port = &grlib_apbuart_ports[co->index];
501
502 spin_lock_init(&port->lock);
503
504 if (options)
505 uart_parse_options(options, &baud, &parity, &bits, &flow);
506 else
507 apbuart_console_get_options(port, &baud, &parity, &bits);
508
509 return uart_set_options(port, co, baud, parity, bits, flow);
510}
511
512static struct uart_driver grlib_apbuart_driver;
513
514static struct console grlib_apbuart_console = {
515 .name = "ttyS",
516 .write = apbuart_console_write,
517 .device = uart_console_device,
518 .setup = apbuart_console_setup,
519 .flags = CON_PRINTBUFFER,
520 .index = -1,
521 .data = &grlib_apbuart_driver,
522};
523
524
525static int grlib_apbuart_configure(void);
526
527static int __init apbuart_console_init(void)
528{
529 if (grlib_apbuart_configure())
530 return -ENODEV;
531 register_console(&grlib_apbuart_console);
532 return 0;
533}
534
535console_initcall(apbuart_console_init);
536
537#define APBUART_CONSOLE (&grlib_apbuart_console)
538#else
539#define APBUART_CONSOLE NULL
540#endif
541
542static struct uart_driver grlib_apbuart_driver = {
543 .owner = THIS_MODULE,
544 .driver_name = "serial",
545 .dev_name = "ttyS",
546 .major = SERIAL_APBUART_MAJOR,
547 .minor = SERIAL_APBUART_MINOR,
548 .nr = UART_NR,
549 .cons = APBUART_CONSOLE,
550};
551
552
553/* ======================================================================== */
554/* OF Platform Driver */
555/* ======================================================================== */
556
557static int __devinit apbuart_probe(struct platform_device *op)
558{
559 int i;
560 struct uart_port *port = NULL;
561
562 for (i = 0; i < grlib_apbuart_port_nr; i++) {
563 if (op->dev.of_node == grlib_apbuart_nodes[i])
564 break;
565 }
566
567 port = &grlib_apbuart_ports[i];
568 port->dev = &op->dev;
569 port->irq = op->archdata.irqs[0];
570
571 uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port);
572
573 apbuart_flush_fifo((struct uart_port *) port);
574
575 printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n",
576 (unsigned long long) port->mapbase, port->irq);
577 return 0;
578}
579
580static struct of_device_id apbuart_match[] = {
581 {
582 .name = "GAISLER_APBUART",
583 },
584 {
585 .name = "01_00c",
586 },
587 {},
588};
589
590static struct platform_driver grlib_apbuart_of_driver = {
591 .probe = apbuart_probe,
592 .driver = {
593 .owner = THIS_MODULE,
594 .name = "grlib-apbuart",
595 .of_match_table = apbuart_match,
596 },
597};
598
599
600static int __init grlib_apbuart_configure(void)
601{
602 struct device_node *np;
603 int line = 0;
604
605 for_each_matching_node(np, apbuart_match) {
606 const int *ampopts;
607 const u32 *freq_hz;
608 const struct amba_prom_registers *regs;
609 struct uart_port *port;
610 unsigned long addr;
611
612 ampopts = of_get_property(np, "ampopts", NULL);
613 if (ampopts && (*ampopts == 0))
614 continue; /* Ignore if used by another OS instance */
615 regs = of_get_property(np, "reg", NULL);
616 /* Frequency of APB Bus is frequency of UART */
617 freq_hz = of_get_property(np, "freq", NULL);
618
619 if (!regs || !freq_hz || (*freq_hz == 0))
620 continue;
621
622 grlib_apbuart_nodes[line] = np;
623
624 addr = regs->phys_addr;
625
626 port = &grlib_apbuart_ports[line];
627
628 port->mapbase = addr;
629 port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map));
630 port->irq = 0;
631 port->iotype = UPIO_MEM;
632 port->ops = &grlib_apbuart_ops;
633 port->flags = UPF_BOOT_AUTOCONF;
634 port->line = line;
635 port->uartclk = *freq_hz;
636 port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line);
637 line++;
638
639 /* We support maximum UART_NR uarts ... */
640 if (line == UART_NR)
641 break;
642 }
643
644 grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line;
645 return line ? 0 : -ENODEV;
646}
647
648static int __init grlib_apbuart_init(void)
649{
650 int ret;
651
652 /* Find all APBUARTS in device the tree and initialize their ports */
653 ret = grlib_apbuart_configure();
654 if (ret)
655 return ret;
656
657 printk(KERN_INFO "Serial: GRLIB APBUART driver\n");
658
659 ret = uart_register_driver(&grlib_apbuart_driver);
660
661 if (ret) {
662 printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
663 __FILE__, ret);
664 return ret;
665 }
666
667 ret = platform_driver_register(&grlib_apbuart_of_driver);
668 if (ret) {
669 printk(KERN_ERR
670 "%s: platform_driver_register failed (%i)\n",
671 __FILE__, ret);
672 uart_unregister_driver(&grlib_apbuart_driver);
673 return ret;
674 }
675
676 return ret;
677}
678
679static void __exit grlib_apbuart_exit(void)
680{
681 int i;
682
683 for (i = 0; i < grlib_apbuart_port_nr; i++)
684 uart_remove_one_port(&grlib_apbuart_driver,
685 &grlib_apbuart_ports[i]);
686
687 uart_unregister_driver(&grlib_apbuart_driver);
688 platform_driver_unregister(&grlib_apbuart_of_driver);
689}
690
691module_init(grlib_apbuart_init);
692module_exit(grlib_apbuart_exit);
693
694MODULE_AUTHOR("Aeroflex Gaisler AB");
695MODULE_DESCRIPTION("GRLIB APBUART serial driver");
696MODULE_VERSION("2.1");
697MODULE_LICENSE("GPL");