Linux Audio

Check our new training course

Loading...
v6.2
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * Lite5200B board Device Tree Source
  4 *
  5 * Copyright 2006-2007 Secret Lab Technologies Ltd.
  6 * Grant Likely <grant.likely@secretlab.ca>
 
 
 
 
 
  7 */
  8
  9/include/ "mpc5200b.dtsi"
 10
 11&gpt0 { fsl,has-wdt; };
 12&gpt2 { gpio-controller; };
 13&gpt3 { gpio-controller; };
 14
 15/ {
 16	model = "fsl,lite5200b";
 17	compatible = "fsl,lite5200b";
 18
 19	leds {
 20		compatible = "gpio-leds";
 21		tmr2 {
 22			gpios = <&gpt2 0 1>;
 23		};
 24		tmr3 {
 25			gpios = <&gpt3 0 1>;
 26			linux,default-trigger = "heartbeat";
 27		};
 28		led1 { gpios = <&gpio_wkup 2 1>; };
 29		led2 { gpios = <&gpio_simple 3 1>; };
 30		led3 { gpios = <&gpio_wkup 3 1>; };
 31		led4 { gpios = <&gpio_simple 2 1>; };
 32	};
 33
 34	memory@0 {
 35		reg = <0x00000000 0x10000000>;	// 256MB
 36	};
 37
 38	soc5200@f0000000 {
 
 
 
 
 39		psc@2000 {		// PSC1
 40			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 41			cell-index = <0>;
 42		};
 43
 44		psc@2200 {		// PSC2
 45			status = "disabled";
 46		};
 47
 48		psc@2400 {		// PSC3
 49			status = "disabled";
 50		};
 51
 52		psc@2600 {		// PSC4
 53			status = "disabled";
 54		};
 55
 56		psc@2800 {		// PSC5
 57			status = "disabled";
 58		};
 59
 60		psc@2c00 {		// PSC6
 61			status = "disabled";
 62		};
 63
 64		// PSC2 in ac97 mode example
 65		//ac97@2200 {		// PSC2
 66		//	compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 67		//	cell-index = <1>;
 68		//};
 69
 70		// PSC3 in CODEC mode example
 71		//i2s@2400 {		// PSC3
 72		//	compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
 73		//	cell-index = <2>;
 74		//};
 75
 76		// PSC6 in spi mode example
 77		//spi@2c00 {		// PSC6
 78		//	compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
 79		//	cell-index = <5>;
 80		//};
 81
 82		ethernet@3000 {
 83			phy-handle = <&phy0>;
 84		};
 85
 86		mdio@3000 {
 87			phy0: ethernet-phy@0 {
 88				reg = <0>;
 89			};
 90		};
 91
 92		i2c@3d40 {
 93			eeprom@50 {
 94				compatible = "atmel,24c02";
 95				reg = <0x50>;
 96			};
 97		};
 98
 99		sram@8000 {
100			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
101			reg = <0x8000 0x4000>;
102		};
103	};
104
105	pci@f0000d00 {
106		interrupt-map-mask = <0xf800 0 0 7>;
107		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
108				 0xc000 0 0 2 &mpc5200_pic 1 1 3
109				 0xc000 0 0 3 &mpc5200_pic 1 2 3
110				 0xc000 0 0 4 &mpc5200_pic 1 3 3
111
112				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
113				 0xc800 0 0 2 &mpc5200_pic 1 2 3
114				 0xc800 0 0 3 &mpc5200_pic 1 3 3
115				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
116		clock-frequency = <0>; // From boot loader
117		interrupts = <2 8 0 2 9 0 2 10 0>;
118		bus-range = <0 0>;
119		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
120			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
121			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
122	};
123
124	localbus {
125		ranges = <0 0 0xfe000000 0x02000000>;
126
127		flash@0,0 {
128			compatible = "cfi-flash";
129			reg = <0 0 0x02000000>;
130			bank-width = <1>;
131			#size-cells = <1>;
132			#address-cells = <1>;
133
134			partition@0 {
135				label = "kernel";
136				reg = <0x00000000 0x00200000>;
137			};
138			partition@200000 {
139				label = "rootfs";
140				reg = <0x00200000 0x01d00000>;
141			};
142			partition@1f00000 {
143				label = "u-boot";
144				reg = <0x01f00000 0x00060000>;
145			};
146			partition@1f60000 {
147				label = "u-boot-env";
148				reg = <0x01f60000 0x00020000>;
149			};
150			partition@1f80000 {
151				label = "dtb";
152				reg = <0x01f80000 0x00080000>;
153			};
154		};
155	};
156
157};
v3.5.6
 
  1/*
  2 * Lite5200B board Device Tree Source
  3 *
  4 * Copyright 2006-2007 Secret Lab Technologies Ltd.
  5 * Grant Likely <grant.likely@secretlab.ca>
  6 *
  7 * This program is free software; you can redistribute  it and/or modify it
  8 * under  the terms of  the GNU General  Public License as published by the
  9 * Free Software Foundation;  either version 2 of the  License, or (at your
 10 * option) any later version.
 11 */
 12
 13/include/ "mpc5200b.dtsi"
 14
 
 
 
 
 15/ {
 16	model = "fsl,lite5200b";
 17	compatible = "fsl,lite5200b";
 18
 19	memory {
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 20		reg = <0x00000000 0x10000000>;	// 256MB
 21	};
 22
 23	soc5200@f0000000 {
 24		timer@600 {	// General Purpose Timer
 25			fsl,has-wdt;
 26		};
 27
 28		psc@2000 {		// PSC1
 29			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 30			cell-index = <0>;
 31		};
 32
 33		psc@2200 {		// PSC2
 34			status = "disabled";
 35		};
 36
 37		psc@2400 {		// PSC3
 38			status = "disabled";
 39		};
 40
 41		psc@2600 {		// PSC4
 42			status = "disabled";
 43		};
 44
 45		psc@2800 {		// PSC5
 46			status = "disabled";
 47		};
 48
 49		psc@2c00 {		// PSC6
 50			status = "disabled";
 51		};
 52
 53		// PSC2 in ac97 mode example
 54		//ac97@2200 {		// PSC2
 55		//	compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 56		//	cell-index = <1>;
 57		//};
 58
 59		// PSC3 in CODEC mode example
 60		//i2s@2400 {		// PSC3
 61		//	compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
 62		//	cell-index = <2>;
 63		//};
 64
 65		// PSC6 in spi mode example
 66		//spi@2c00 {		// PSC6
 67		//	compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
 68		//	cell-index = <5>;
 69		//};
 70
 71		ethernet@3000 {
 72			phy-handle = <&phy0>;
 73		};
 74
 75		mdio@3000 {
 76			phy0: ethernet-phy@0 {
 77				reg = <0>;
 78			};
 79		};
 80
 81		i2c@3d40 {
 82			eeprom@50 {
 83				compatible = "atmel,24c02";
 84				reg = <0x50>;
 85			};
 86		};
 87
 88		sram@8000 {
 89			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
 90			reg = <0x8000 0x4000>;
 91		};
 92	};
 93
 94	pci@f0000d00 {
 95		interrupt-map-mask = <0xf800 0 0 7>;
 96		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
 97				 0xc000 0 0 2 &mpc5200_pic 1 1 3
 98				 0xc000 0 0 3 &mpc5200_pic 1 2 3
 99				 0xc000 0 0 4 &mpc5200_pic 1 3 3
100
101				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
102				 0xc800 0 0 2 &mpc5200_pic 1 2 3
103				 0xc800 0 0 3 &mpc5200_pic 1 3 3
104				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
105		clock-frequency = <0>; // From boot loader
106		interrupts = <2 8 0 2 9 0 2 10 0>;
107		bus-range = <0 0>;
108		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
109			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
110			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
111	};
112
113	localbus {
114		ranges = <0 0 0xfe000000 0x02000000>;
115
116		flash@0,0 {
117			compatible = "cfi-flash";
118			reg = <0 0 0x02000000>;
119			bank-width = <1>;
120			#size-cells = <1>;
121			#address-cells = <1>;
122
123			partition@0 {
124				label = "kernel";
125				reg = <0x00000000 0x00200000>;
126			};
127			partition@200000 {
128				label = "rootfs";
129				reg = <0x00200000 0x01d00000>;
130			};
131			partition@1f00000 {
132				label = "u-boot";
133				reg = <0x01f00000 0x00060000>;
134			};
135			partition@1f60000 {
136				label = "u-boot-env";
137				reg = <0x01f60000 0x00020000>;
138			};
139			partition@1f80000 {
140				label = "dtb";
141				reg = <0x01f80000 0x00080000>;
142			};
143		};
144	};
145
146};