Loading...
Note: File does not exist in v3.5.6.
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * P1021 MDS Device Tree Source
4 *
5 * Copyright 2010,2012 Freescale Semiconductor Inc.
6 */
7
8/include/ "p1021si-pre.dtsi"
9/ {
10 model = "fsl,P1021";
11 compatible = "fsl,P1021MDS";
12
13 aliases {
14 ethernet3 = &enet3;
15 ethernet4 = &enet4;
16 };
17
18 memory {
19 device_type = "memory";
20 };
21
22 lbc: localbus@ffe05000 {
23 reg = <0x0 0xffe05000 0x0 0x1000>;
24
25 /* NAND Flash, BCSR, PMC0/1*/
26 ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
27 0x1 0x0 0x0 0xf8000000 0x00008000
28 0x2 0x0 0x0 0xf8010000 0x00020000
29 0x3 0x0 0x0 0xf8020000 0x00020000>;
30
31 nand@0,0 {
32 #address-cells = <1>;
33 #size-cells = <1>;
34 compatible = "fsl,p1021-fcm-nand",
35 "fsl,elbc-fcm-nand";
36 reg = <0x0 0x0 0x40000>;
37
38 partition@0 {
39 /* This location must not be altered */
40 /* 1MB for u-boot Bootloader Image */
41 reg = <0x0 0x00100000>;
42 label = "NAND (RO) U-Boot Image";
43 read-only;
44 };
45
46 partition@100000 {
47 /* 1MB for DTB Image */
48 reg = <0x00100000 0x00100000>;
49 label = "NAND (RO) DTB Image";
50 read-only;
51 };
52
53 partition@200000 {
54 /* 4MB for Linux Kernel Image */
55 reg = <0x00200000 0x00400000>;
56 label = "NAND (RO) Linux Kernel Image";
57 read-only;
58 };
59
60 partition@600000 {
61 /* 5MB for Compressed Root file System Image */
62 reg = <0x00600000 0x00500000>;
63 label = "NAND (RO) Compressed RFS Image";
64 read-only;
65 };
66
67 partition@b00000 {
68 /* 6MB for JFFS2 based Root file System */
69 reg = <0x00a00000 0x00600000>;
70 label = "NAND (RW) JFFS2 Root File System";
71 };
72
73 partition@1100000 {
74 /* 14MB for JFFS2 based Root file System */
75 reg = <0x01100000 0x00e00000>;
76 label = "NAND (RW) Writable User area";
77 };
78
79 partition@1f00000 {
80 /* 1MB for microcode */
81 reg = <0x01f00000 0x00100000>;
82 label = "NAND (RO) QE Ucode";
83 read-only;
84 };
85 };
86
87 bcsr@1,0 {
88 #address-cells = <1>;
89 #size-cells = <1>;
90 compatible = "fsl,p1021mds-bcsr";
91 reg = <1 0 0x8000>;
92 ranges = <0 1 0 0x8000>;
93 };
94
95 pib@2,0 {
96 compatible = "fsl,p1021mds-pib";
97 reg = <2 0 0x10000>;
98 };
99
100 pib@3,0 {
101 compatible = "fsl,p1021mds-pib";
102 reg = <3 0 0x10000>;
103 };
104 };
105
106 soc: soc@ffe00000 {
107 compatible = "fsl,p1021-immr", "simple-bus";
108 ranges = <0x0 0x0 0xffe00000 0x100000>;
109
110 i2c@3000 {
111 rtc@68 {
112 compatible = "dallas,ds1374";
113 reg = <0x68>;
114 };
115 };
116
117 spi@7000 {
118
119 flash@0 {
120 #address-cells = <1>;
121 #size-cells = <1>;
122 compatible = "spansion,s25sl12801", "jedec,spi-nor";
123 reg = <0>;
124 spi-max-frequency = <40000000>; /* input clock */
125
126 partition@u-boot {
127 label = "u-boot-spi";
128 reg = <0x00000000 0x00100000>;
129 read-only;
130 };
131 partition@kernel {
132 label = "kernel-spi";
133 reg = <0x00100000 0x00500000>;
134 read-only;
135 };
136 partition@dtb {
137 label = "dtb-spi";
138 reg = <0x00600000 0x00100000>;
139 read-only;
140 };
141 partition@fs {
142 label = "file system-spi";
143 reg = <0x00700000 0x00900000>;
144 };
145 };
146 };
147
148 usb@22000 {
149 phy_type = "ulpi";
150 dr_mode = "host";
151 };
152
153 mdio@24000 {
154 phy0: ethernet-phy@0 {
155 interrupts = <1 1 0 0>;
156 reg = <0x0>;
157 };
158 phy1: ethernet-phy@1 {
159 interrupts = <2 1 0 0>;
160 reg = <0x1>;
161 };
162 phy4: ethernet-phy@4 {
163 reg = <0x4>;
164 };
165 tbi-phy@5 {
166 device_type = "tbi-phy";
167 reg = <0x5>;
168 };
169 };
170
171 mdio@25000 {
172 tbi0: tbi-phy@11 {
173 reg = <0x11>;
174 device_type = "tbi-phy";
175 };
176 };
177
178 ethernet@b0000 {
179 phy-handle = <&phy0>;
180 phy-connection-type = "rgmii-id";
181 };
182
183 ethernet@b1000 {
184 phy-handle = <&phy4>;
185 tbi-handle = <&tbi0>;
186 phy-connection-type = "sgmii";
187 };
188
189 ethernet@b2000 {
190 phy-handle = <&phy1>;
191 phy-connection-type = "rgmii-id";
192 };
193
194 par_io@e0100 {
195 #address-cells = <1>;
196 #size-cells = <1>;
197 reg = <0xe0100 0x60>;
198 ranges = <0x0 0xe0100 0x60>;
199 device_type = "par_io";
200 num-ports = <3>;
201 pio1: ucc_pin@1 {
202 pio-map = <
203 /* port pin dir open_drain assignment has_irq */
204 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
205 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
206 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
207 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
208 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
209 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
210 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
211 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
212 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
213 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
214 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
215 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
216 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
217 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
218 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
219 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
220 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
221 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
222 };
223
224 pio2: ucc_pin@2 {
225 pio-map = <
226 /* port pin dir open_drain assignment has_irq */
227 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
228 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
229 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
230 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
231 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
232 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
233 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
234 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
235 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
236 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
237 };
238 };
239 };
240
241 pci0: pcie@ffe09000 {
242 reg = <0 0xffe09000 0 0x1000>;
243 ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
244 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
245 pcie@0 {
246 ranges = <0x2000000 0x0 0xa0000000
247 0x2000000 0x0 0xa0000000
248 0x0 0x20000000
249
250 0x1000000 0x0 0x0
251 0x1000000 0x0 0x0
252 0x0 0x100000>;
253 };
254 };
255
256 pci1: pcie@ffe0a000 {
257 reg = <0 0xffe0a000 0 0x1000>;
258 ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
259 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
260 pcie@0 {
261 ranges = <0x2000000 0x0 0xc0000000
262 0x2000000 0x0 0xc0000000
263 0x0 0x20000000
264
265 0x1000000 0x0 0x0
266 0x1000000 0x0 0x0
267 0x0 0x100000>;
268 };
269 };
270
271 qe: qe@ffe80000 {
272 ranges = <0x0 0x0 0xffe80000 0x40000>;
273 reg = <0 0xffe80000 0 0x480>;
274 brg-frequency = <0>;
275 bus-frequency = <0>;
276 status = "disabled"; /* no firmware loaded */
277
278 enet3: ucc@2000 {
279 device_type = "network";
280 compatible = "ucc_geth";
281 local-mac-address = [ 00 00 00 00 00 00 ];
282 rx-clock-name = "clk12";
283 tx-clock-name = "clk9";
284 pio-handle = <&pio1>;
285 phy-handle = <&qe_phy0>;
286 phy-connection-type = "mii";
287 };
288
289 mdio@2120 {
290 qe_phy0: ethernet-phy@0 {
291 interrupt-parent = <&mpic>;
292 interrupts = <4 1 0 0>;
293 reg = <0x0>;
294 };
295 qe_phy1: ethernet-phy@3 {
296 interrupt-parent = <&mpic>;
297 interrupts = <5 1 0 0>;
298 reg = <0x3>;
299 };
300 tbi-phy@11 {
301 reg = <0x11>;
302 device_type = "tbi-phy";
303 };
304 };
305
306 enet4: ucc@2400 {
307 device_type = "network";
308 compatible = "ucc_geth";
309 local-mac-address = [ 00 00 00 00 00 00 ];
310 rx-clock-name = "none";
311 tx-clock-name = "clk13";
312 pio-handle = <&pio2>;
313 phy-handle = <&qe_phy1>;
314 phy-connection-type = "rmii";
315 };
316 };
317};
318
319/include/ "p1021si-post.dtsi"