Loading...
Note: File does not exist in v3.5.6.
1/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * Hans de Goede <hdegoede@redhat.com>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45/dts-v1/;
46#include "sun7i-a20.dtsi"
47#include "sunxi-common-regulators.dtsi"
48
49#include <dt-bindings/gpio/gpio.h>
50#include <dt-bindings/interrupt-controller/irq.h>
51
52/ {
53 model = "LeMaker Banana Pi";
54 compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
55
56 aliases {
57 serial0 = &uart0;
58 serial1 = &uart3;
59 serial2 = &uart7;
60 };
61
62 chosen {
63 stdout-path = "serial0:115200n8";
64 };
65
66 hdmi-connector {
67 compatible = "hdmi-connector";
68 type = "a";
69
70 port {
71 hdmi_con_in: endpoint {
72 remote-endpoint = <&hdmi_out_con>;
73 };
74 };
75 };
76
77 leds {
78 compatible = "gpio-leds";
79
80 led {
81 label = "bananapi:green:usr";
82 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
83 };
84 };
85
86 reg_gmac_3v3: gmac-3v3 {
87 compatible = "regulator-fixed";
88 regulator-name = "gmac-3v3";
89 regulator-min-microvolt = <3300000>;
90 regulator-max-microvolt = <3300000>;
91 startup-delay-us = <100000>;
92 enable-active-high;
93 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
94 };
95};
96
97&ahci {
98 status = "okay";
99};
100
101&codec {
102 status = "okay";
103};
104
105&cpu0 {
106 cpu-supply = <®_dcdc2>;
107 operating-points =
108 /* kHz uV */
109 <960000 1400000>,
110 <912000 1400000>,
111 <864000 1350000>,
112 <720000 1250000>,
113 <528000 1150000>,
114 <312000 1100000>,
115 <144000 1050000>;
116};
117
118&de {
119 status = "okay";
120};
121
122&ehci0 {
123 status = "okay";
124};
125
126&ehci1 {
127 status = "okay";
128};
129
130&gmac {
131 pinctrl-names = "default";
132 pinctrl-0 = <&gmac_rgmii_pins>;
133 phy-handle = <&phy1>;
134 phy-mode = "rgmii-id";
135 phy-supply = <®_gmac_3v3>;
136 status = "okay";
137};
138
139&hdmi {
140 status = "okay";
141};
142
143&hdmi_out {
144 hdmi_out_con: endpoint {
145 remote-endpoint = <&hdmi_con_in>;
146 };
147};
148
149&i2c0 {
150 status = "okay";
151
152 axp209: pmic@34 {
153 reg = <0x34>;
154 interrupt-parent = <&nmi_intc>;
155 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
156 };
157};
158
159&i2c2 {
160 status = "okay";
161};
162
163&ir0 {
164 pinctrl-names = "default";
165 pinctrl-0 = <&ir0_rx_pin>;
166 status = "okay";
167};
168
169&gmac_mdio {
170 phy1: ethernet-phy@1 {
171 reg = <1>;
172 };
173};
174
175&mmc0 {
176 vmmc-supply = <®_vcc3v3>;
177 bus-width = <4>;
178 cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
179 status = "okay";
180};
181
182&ohci0 {
183 status = "okay";
184};
185
186&ohci1 {
187 status = "okay";
188};
189
190&otg_sram {
191 status = "okay";
192};
193
194&pio {
195 vcc-pa-supply = <®_vcc3v3>;
196 vcc-pc-supply = <®_vcc3v3>;
197 vcc-pe-supply = <®_vcc3v3>;
198 vcc-pf-supply = <®_vcc3v3>;
199 vcc-pg-supply = <®_vcc3v3>;
200 gpio-line-names =
201 /* PA */
202 "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
203 "ETXD2", "ETXD1", "ETXD0",
204 "ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO",
205 "ETXEN", "ETXCK", "ECRS",
206 "ECOL", "ETXERR", "", "", "", "", "", "",
207 "", "", "", "", "", "", "", "",
208 /* PB */
209 "PMU-SCK", "PMU-SDA", "", "", "", "", "", "",
210 "", "USB0-DRV", "", "", "", "", "", "",
211 "", "", "", "", "SCL", "SDA", "", "",
212 "", "", "", "", "", "", "", "",
213 /* PC */
214 "", "", "", "", "", "", "", "",
215 "", "", "", "", "", "", "", "",
216 "", "", "", "", "", "", "", "",
217 "", "", "", "", "", "", "", "",
218 /* PD */
219 "", "", "", "", "", "", "", "",
220 "", "", "", "", "", "", "", "",
221 "", "", "", "", "", "", "", "",
222 "", "", "", "", "", "", "", "",
223 /* PE */
224 "", "", "", "", "", "", "", "",
225 "", "", "", "", "", "", "", "",
226 "", "", "", "", "", "", "", "",
227 "", "", "", "", "", "", "", "",
228 /* PF */
229 "SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3",
230 "SD0-D2", "", "",
231 "", "", "", "", "", "", "", "",
232 "", "", "", "", "", "", "", "",
233 "", "", "", "", "", "", "", "",
234 /* PG */
235 "", "", "", "", "", "", "", "",
236 "", "", "", "", "", "", "", "",
237 "", "", "", "", "", "", "", "",
238 "", "", "", "", "", "", "", "",
239 /* PH */
240 "TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "",
241 "", "", "SD0-DET", "", "", "", "", "",
242 "", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN",
243 "LED1", "", "", "", "", "", "", "",
244 /* PI */
245 "", "", "", "IO-GCLK", "", "", "", "",
246 "", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI",
247 "SPI-MISO", "SPI-CE1", "",
248 "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
249 "", "", "", "", "", "", "", "";
250};
251
252#include "axp209.dtsi"
253
254®_dcdc2 {
255 regulator-always-on;
256 regulator-min-microvolt = <1000000>;
257 regulator-max-microvolt = <1400000>;
258 regulator-name = "vdd-cpu";
259};
260
261®_dcdc3 {
262 regulator-always-on;
263 regulator-min-microvolt = <1000000>;
264 regulator-max-microvolt = <1400000>;
265 regulator-name = "vdd-int-dll";
266};
267
268®_ldo1 {
269 regulator-name = "vdd-rtc";
270};
271
272®_ldo2 {
273 regulator-always-on;
274 regulator-min-microvolt = <3000000>;
275 regulator-max-microvolt = <3000000>;
276 regulator-name = "avcc";
277};
278
279®_usb0_vbus {
280 status = "okay";
281};
282
283®_usb1_vbus {
284 status = "okay";
285};
286
287®_usb2_vbus {
288 status = "okay";
289};
290
291&spi0 {
292 pinctrl-names = "default";
293 pinctrl-0 = <&spi0_pi_pins>,
294 <&spi0_cs0_pi_pin>,
295 <&spi0_cs1_pi_pin>;
296 status = "okay";
297};
298
299&uart0 {
300 pinctrl-names = "default";
301 pinctrl-0 = <&uart0_pb_pins>;
302 status = "okay";
303};
304
305&uart3 {
306 pinctrl-names = "default";
307 pinctrl-0 = <&uart3_ph_pins>;
308 status = "okay";
309};
310
311&uart7 {
312 pinctrl-names = "default";
313 pinctrl-0 = <&uart7_pi_pins>;
314 status = "okay";
315};
316
317&usb_otg {
318 dr_mode = "otg";
319 status = "okay";
320};
321
322&usb_power_supply {
323 status = "okay";
324};
325
326&usbphy {
327 usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
328 usb0_vbus_power-supply = <&usb_power_supply>;
329 usb0_vbus-supply = <®_usb0_vbus>;
330 usb1_vbus-supply = <®_usb1_vbus>;
331 usb2_vbus-supply = <®_usb2_vbus>;
332 status = "okay";
333};