1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  2/*
  3 * Copyright (c) 2014 Protonic Holland
  4 */
  5
  6/dts-v1/;
  7#include "imx6dl.dtsi"
  8#include "imx6qdl-prti6q.dtsi"
  9#include <dt-bindings/leds/common.h>
 10
 11/ {
 12	model = "Protonic RVT board";
 13	compatible = "prt,prtrvt", "fsl,imx6dl";
 14
 15	memory@10000000 {
 16		device_type = "memory";
 17		reg = <0x10000000 0x10000000>;
 18	};
 19
 20	leds {
 21		compatible = "gpio-leds";
 22		pinctrl-names = "default";
 23		pinctrl-0 = <&pinctrl_leds>;
 24
 25		led-debug0 {
 26			function = LED_FUNCTION_STATUS;
 27			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 28			linux,default-trigger = "heartbeat";
 29		};
 30	};
 31};
 32
 33&can1 {
 34	pinctrl-names = "default";
 35	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
 36	status = "okay";
 37};
 38
 39&ecspi1 {
 40	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 41	pinctrl-names = "default";
 42	pinctrl-0 = <&pinctrl_ecspi1>;
 43	status = "okay";
 44
 45	flash@0 {
 46		compatible = "jedec,spi-nor";
 47		reg = <0>;
 48		spi-max-frequency = <20000000>;
 49		#address-cells = <1>;
 50		#size-cells = <1>;
 51	};
 52};
 53
 54&ecspi3 {
 55	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 56	pinctrl-names = "default";
 57	pinctrl-0 = <&pinctrl_ecspi3>;
 58	status = "okay";
 59
 60	nfc@0 {
 61		compatible = "ti,trf7970a";
 62		reg = <0>;
 63		pinctrl-names = "default";
 64		pinctrl-0 = <&pinctrl_nfc>;
 65		spi-max-frequency = <2000000>;
 66		interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>;
 67		ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
 68				  <&gpio5 11 GPIO_ACTIVE_LOW>;
 69		vin-supply = <&reg_3v3>;
 70		autosuspend-delay = <30000>;
 71		irq-status-read-quirk;
 72		en2-rf-quirk;
 73		status = "okay";
 74	};
 75};
 76
 77&i2c3 {
 78	adc@49 {
 79		compatible = "ti,ads1015";
 80		reg = <0x49>;
 81		#address-cells = <1>;
 82		#size-cells = <0>;
 83
 84		/* nc */
 85		channel@4 {
 86			reg = <4>;
 87			ti,gain = <3>;
 88			ti,datarate = <3>;
 89		};
 90
 91		/* nc */
 92		channel@5 {
 93			reg = <5>;
 94			ti,gain = <3>;
 95			ti,datarate = <3>;
 96		};
 97
 98		/* can1_l */
 99		channel@6 {
100			reg = <6>;
101			ti,gain = <3>;
102			ti,datarate = <3>;
103		};
104
105		/* can1_h */
106		channel@7 {
107			reg = <7>;
108			ti,gain = <3>;
109			ti,datarate = <3>;
110		};
111	};
112
113	rtc@51 {
114		compatible = "nxp,pcf8563";
115		reg = <0x51>;
116	};
117};
118
119&pcie {
120	status = "okay";
121};
122
123&usbh1 {
124	status = "disabled";
125};
126
127&vpu {
128	status = "disabled";
129};
130
131&iomuxc {
132	pinctrl_can1phy: can1phy {
133		fsl,pins = <
134			/* CAN1_SR */
135			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
136			/* CAN1_TERM */
137			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
138		>;
139	};
140
141	pinctrl_ecspi1: ecspi1grp {
142		fsl,pins = <
143			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
144			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
145			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
146			/* CS */
147			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
148		>;
149	};
150
151	pinctrl_ecspi3: ecspi3grp {
152		fsl,pins = <
153			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
154			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
155			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
156			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
157		>;
158	};
159
160	pinctrl_leds: ledsgrp {
161		fsl,pins = <
162			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
163		>;
164	};
165
166	pinctrl_nfc: nfcgrp {
167		fsl,pins = <
168			/* NFC_ASK_OOK */
169			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x100b1
170			/* NFC_PWR_EN */
171			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x100b1
172			/* NFC_EN2 */
173			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x100b1
174			/* NFC_EN */
175			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
176			/* NFC_MOD */
177			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
178			/* NFC_IRQ */
179			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
180		>;
181	};
182};