Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.5.6.
  1/*
  2 *  BSD LICENSE
  3 *
  4 *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
  5 *
  6 *  Redistribution and use in source and binary forms, with or without
  7 *  modification, are permitted provided that the following conditions
  8 *  are met:
  9 *
 10 *    * Redistributions of source code must retain the above copyright
 11 *      notice, this list of conditions and the following disclaimer.
 12 *    * Redistributions in binary form must reproduce the above copyright
 13 *      notice, this list of conditions and the following disclaimer in
 14 *      the documentation and/or other materials provided with the
 15 *      distribution.
 16 *    * Neither the name of Broadcom Corporation nor the names of its
 17 *      contributors may be used to endorse or promote products derived
 18 *      from this software without specific prior written permission.
 19 *
 20 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 21 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 22 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 23 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 24 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 25 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 26 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 27 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 28 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 29 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 30 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 31 */
 32
 33/dts-v1/;
 34
 35#include "bcm4708.dtsi"
 36
 37/ {
 38	model = "NorthStar SVK (BCM953012K)";
 39	compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708";
 40
 41	aliases {
 42		serial0 = &uart0;
 43		serial1 = &uart1;
 44	};
 45
 46	memory@80000000 {
 47		device_type = "memory";
 48		reg = <0x80000000 0x10000000>;
 49	};
 50};
 51
 52&nand_controller {
 53	nand@0 {
 54		compatible = "brcm,nandcs";
 55		reg = <0>;
 56		nand-on-flash-bbt;
 57
 58		#address-cells = <1>;
 59		#size-cells = <1>;
 60
 61		nand-ecc-strength = <4>;
 62		nand-ecc-step-size = <512>;
 63
 64		partition@0 {
 65			label = "nboot";
 66			reg = <0x00000000 0x00200000>;
 67			read-only;
 68		};
 69		partition@200000 {
 70			label = "nenv";
 71			reg = <0x00200000 0x00400000>;
 72		};
 73		partition@600000 {
 74			label = "nsystem";
 75			reg = <0x00600000 0x00a00000>;
 76		};
 77		partition@1000000 {
 78			label = "nrootfs";
 79			reg = <0x01000000 0x07000000>;
 80		};
 81	};
 82};
 83
 84&spi_nor {
 85	status = "okay";
 86	spi-max-frequency = <62500000>;
 87	m25p,default-addr-width = <3>;
 88
 89	#address-cells = <1>;
 90	#size-cells = <1>;
 91
 92	partition@0 {
 93		label = "boot";
 94		reg = <0x00000000 0x000d0000>;
 95	};
 96	partition@d000 {
 97		label = "env";
 98		reg = <0x000d0000 0x00030000>;
 99	};
100	partition@100000 {
101		label = "system";
102		reg = <0x00100000 0x00600000>;
103	};
104	partition@700000 {
105		label = "rootfs";
106		reg = <0x00700000 0x00900000>;
107	};
108};
109
110&uart0 {
111	status = "okay";
112};
113
114&uart1 {
115	status = "okay";
116};
117
118&usb3_phy {
119	status = "okay";
120};