Loading...
Note: File does not exist in v3.5.6.
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
4 *
5 * Common PRUSS data for TI AM57xx platforms
6 */
7
8&ocp {
9 pruss1_tm: target-module@4b226000 {
10 compatible = "ti,sysc-pruss", "ti,sysc";
11 reg = <0x4b226000 0x4>,
12 <0x4b226004 0x4>;
13 reg-names = "rev", "sysc";
14 ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
15 SYSC_PRUSS_SUB_MWAIT)>;
16 ti,sysc-midle = <SYSC_IDLE_FORCE>,
17 <SYSC_IDLE_NO>,
18 <SYSC_IDLE_SMART>;
19 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
20 <SYSC_IDLE_NO>,
21 <SYSC_IDLE_SMART>;
22 /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
23 clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>;
24 clock-names = "fck";
25 #address-cells = <1>;
26 #size-cells = <1>;
27 ranges = <0x00000000 0x4b200000 0x80000>;
28
29 pruss1: pruss@0 {
30 compatible = "ti,am5728-pruss";
31 reg = <0x0 0x80000>;
32 #address-cells = <1>;
33 #size-cells = <1>;
34 ranges;
35
36 pruss1_mem: memories@0 {
37 reg = <0x0 0x2000>,
38 <0x2000 0x2000>,
39 <0x10000 0x8000>;
40 reg-names = "dram0", "dram1",
41 "shrdram2";
42 };
43
44 pruss1_cfg: cfg@26000 {
45 compatible = "ti,pruss-cfg", "syscon";
46 reg = <0x26000 0x2000>;
47 #address-cells = <1>;
48 #size-cells = <1>;
49 ranges = <0x0 0x26000 0x2000>;
50
51 clocks {
52 #address-cells = <1>;
53 #size-cells = <0>;
54
55 pruss1_iepclk_mux: iepclk-mux@30 {
56 reg = <0x30>;
57 #clock-cells = <0>;
58 clocks = <&dpll_gmac_m3x2_ck>, /* icss_iep_clk */
59 <&dpll_gmac_h13x2_ck>; /* icss_clk */
60 };
61 };
62 };
63
64 pruss1_mii_rt: mii-rt@32000 {
65 compatible = "ti,pruss-mii", "syscon";
66 reg = <0x32000 0x58>;
67 };
68
69 pruss1_intc: interrupt-controller@20000 {
70 compatible = "ti,pruss-intc";
71 reg = <0x20000 0x2000>;
72 interrupt-controller;
73 #interrupt-cells = <3>;
74 interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
75 <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
76 <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
77 <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
78 <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
79 <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
80 <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
81 <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
82 interrupt-names = "host_intr0", "host_intr1",
83 "host_intr2", "host_intr3",
84 "host_intr4", "host_intr5",
85 "host_intr6", "host_intr7";
86 };
87
88 pru1_0: pru@34000 {
89 compatible = "ti,am5728-pru";
90 reg = <0x34000 0x3000>,
91 <0x22000 0x400>,
92 <0x22400 0x100>;
93 reg-names = "iram", "control", "debug";
94 firmware-name = "am57xx-pru1_0-fw";
95 };
96
97 pru1_1: pru@38000 {
98 compatible = "ti,am5728-pru";
99 reg = <0x38000 0x3000>,
100 <0x24000 0x400>,
101 <0x24400 0x100>;
102 reg-names = "iram", "control", "debug";
103 firmware-name = "am57xx-pru1_1-fw";
104 };
105
106 pruss1_mdio: mdio@32400 {
107 compatible = "ti,davinci_mdio";
108 #address-cells = <1>;
109 #size-cells = <0>;
110 clocks = <&dpll_gmac_h13x2_ck>;
111 clock-names = "fck";
112 bus_freq = <1000000>;
113 reg = <0x32400 0x90>;
114 };
115 };
116 };
117
118 pruss2_tm: target-module@4b2a6000 {
119 compatible = "ti,sysc-pruss", "ti,sysc";
120 reg = <0x4b2a6000 0x4>,
121 <0x4b2a6004 0x4>;
122 reg-names = "rev", "sysc";
123 ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
124 SYSC_PRUSS_SUB_MWAIT)>;
125 ti,sysc-midle = <SYSC_IDLE_FORCE>,
126 <SYSC_IDLE_NO>,
127 <SYSC_IDLE_SMART>;
128 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
129 <SYSC_IDLE_NO>,
130 <SYSC_IDLE_SMART>;
131 /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
132 clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>;
133 clock-names = "fck";
134 #address-cells = <1>;
135 #size-cells = <1>;
136 ranges = <0x00000000 0x4b280000 0x80000>;
137
138 pruss2: pruss@0 {
139 compatible = "ti,am5728-pruss";
140 reg = <0x0 0x80000>;
141 #address-cells = <1>;
142 #size-cells = <1>;
143 ranges;
144
145 pruss2_mem: memories@0 {
146 reg = <0x0 0x2000>,
147 <0x2000 0x2000>,
148 <0x10000 0x8000>;
149 reg-names = "dram0", "dram1",
150 "shrdram2";
151 };
152
153 pruss2_cfg: cfg@26000 {
154 compatible = "ti,pruss-cfg", "syscon";
155 reg = <0x26000 0x2000>;
156 #address-cells = <1>;
157 #size-cells = <1>;
158 ranges = <0x0 0x26000 0x2000>;
159
160 clocks {
161 #address-cells = <1>;
162 #size-cells = <0>;
163
164 pruss2_iepclk_mux: iepclk-mux@30 {
165 reg = <0x30>;
166 #clock-cells = <0>;
167 clocks = <&dpll_gmac_m3x2_ck>, /* icss_iep_clk */
168 <&dpll_gmac_h13x2_ck>; /* icss_clk */
169 };
170 };
171 };
172
173 pruss2_mii_rt: mii-rt@32000 {
174 compatible = "ti,pruss-mii", "syscon";
175 reg = <0x32000 0x58>;
176 };
177
178 pruss2_intc: interrupt-controller@20000 {
179 compatible = "ti,pruss-intc";
180 reg = <0x20000 0x2000>;
181 interrupt-controller;
182 #interrupt-cells = <3>;
183 interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
184 <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
185 <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
186 <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
187 <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
188 <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
189 <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
190 <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
191 interrupt-names = "host_intr0", "host_intr1",
192 "host_intr2", "host_intr3",
193 "host_intr4", "host_intr5",
194 "host_intr6", "host_intr7";
195 };
196
197 pru2_0: pru@34000 {
198 compatible = "ti,am5728-pru";
199 reg = <0x34000 0x3000>,
200 <0x22000 0x400>,
201 <0x22400 0x100>;
202 reg-names = "iram", "control", "debug";
203 firmware-name = "am57xx-pru2_0-fw";
204 };
205
206 pru2_1: pru@38000 {
207 compatible = "ti,am5728-pru";
208 reg = <0x38000 0x3000>,
209 <0x24000 0x400>,
210 <0x24400 0x100>;
211 reg-names = "iram", "control", "debug";
212 firmware-name = "am57xx-pru2_1-fw";
213 };
214
215 pruss2_mdio: mdio@32400 {
216 compatible = "ti,davinci_mdio";
217 #address-cells = <1>;
218 #size-cells = <0>;
219 clocks = <&dpll_gmac_h13x2_ck>;
220 clock-names = "fck";
221 bus_freq = <1000000>;
222 reg = <0x32400 0x90>;
223 };
224 };
225 };
226};