Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2
3/*
4 * xHCI host controller driver
5 *
6 * Copyright (C) 2008 Intel Corp.
7 *
8 * Author: Sarah Sharp
9 * Some code borrowed from the Linux EHCI driver.
10 */
11
12#ifndef __LINUX_XHCI_HCD_H
13#define __LINUX_XHCI_HCD_H
14
15#include <linux/usb.h>
16#include <linux/timer.h>
17#include <linux/kernel.h>
18#include <linux/usb/hcd.h>
19#include <linux/io-64-nonatomic-lo-hi.h>
20
21/* Code sharing between pci-quirks and xhci hcd */
22#include "xhci-ext-caps.h"
23#include "pci-quirks.h"
24
25/* max buffer size for trace and debug messages */
26#define XHCI_MSG_MAX 500
27
28/* xHCI PCI Configuration Registers */
29#define XHCI_SBRN_OFFSET (0x60)
30
31/* Max number of USB devices for any host controller - limit in section 6.1 */
32#define MAX_HC_SLOTS 256
33/* Section 5.3.3 - MaxPorts */
34#define MAX_HC_PORTS 127
35
36/*
37 * xHCI register interface.
38 * This corresponds to the eXtensible Host Controller Interface (xHCI)
39 * Revision 0.95 specification
40 */
41
42/**
43 * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
44 * @hc_capbase: length of the capabilities register and HC version number
45 * @hcs_params1: HCSPARAMS1 - Structural Parameters 1
46 * @hcs_params2: HCSPARAMS2 - Structural Parameters 2
47 * @hcs_params3: HCSPARAMS3 - Structural Parameters 3
48 * @hcc_params: HCCPARAMS - Capability Parameters
49 * @db_off: DBOFF - Doorbell array offset
50 * @run_regs_off: RTSOFF - Runtime register space offset
51 * @hcc_params2: HCCPARAMS2 Capability Parameters 2, xhci 1.1 only
52 */
53struct xhci_cap_regs {
54 __le32 hc_capbase;
55 __le32 hcs_params1;
56 __le32 hcs_params2;
57 __le32 hcs_params3;
58 __le32 hcc_params;
59 __le32 db_off;
60 __le32 run_regs_off;
61 __le32 hcc_params2; /* xhci 1.1 */
62 /* Reserved up to (CAPLENGTH - 0x1C) */
63};
64
65/* hc_capbase bitmasks */
66/* bits 7:0 - how long is the Capabilities register */
67#define HC_LENGTH(p) XHCI_HC_LENGTH(p)
68/* bits 31:16 */
69#define HC_VERSION(p) (((p) >> 16) & 0xffff)
70
71/* HCSPARAMS1 - hcs_params1 - bitmasks */
72/* bits 0:7, Max Device Slots */
73#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff)
74#define HCS_SLOTS_MASK 0xff
75/* bits 8:18, Max Interrupters */
76#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff)
77/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
78#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
79
80/* HCSPARAMS2 - hcs_params2 - bitmasks */
81/* bits 0:3, frames or uframes that SW needs to queue transactions
82 * ahead of the HW to meet periodic deadlines */
83#define HCS_IST(p) (((p) >> 0) & 0xf)
84/* bits 4:7, max number of Event Ring segments */
85#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
86/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
87/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
88/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
89#define HCS_MAX_SCRATCHPAD(p) ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
90
91/* HCSPARAMS3 - hcs_params3 - bitmasks */
92/* bits 0:7, Max U1 to U0 latency for the roothub ports */
93#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff)
94/* bits 16:31, Max U2 to U0 latency for the roothub ports */
95#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff)
96
97/* HCCPARAMS - hcc_params - bitmasks */
98/* true: HC can use 64-bit address pointers */
99#define HCC_64BIT_ADDR(p) ((p) & (1 << 0))
100/* true: HC can do bandwidth negotiation */
101#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1))
102/* true: HC uses 64-byte Device Context structures
103 * FIXME 64-byte context structures aren't supported yet.
104 */
105#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2))
106/* true: HC has port power switches */
107#define HCC_PPC(p) ((p) & (1 << 3))
108/* true: HC has port indicators */
109#define HCS_INDICATOR(p) ((p) & (1 << 4))
110/* true: HC has Light HC Reset Capability */
111#define HCC_LIGHT_RESET(p) ((p) & (1 << 5))
112/* true: HC supports latency tolerance messaging */
113#define HCC_LTC(p) ((p) & (1 << 6))
114/* true: no secondary Stream ID Support */
115#define HCC_NSS(p) ((p) & (1 << 7))
116/* true: HC supports Stopped - Short Packet */
117#define HCC_SPC(p) ((p) & (1 << 9))
118/* true: HC has Contiguous Frame ID Capability */
119#define HCC_CFC(p) ((p) & (1 << 11))
120/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
121#define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1))
122/* Extended Capabilities pointer from PCI base - section 5.3.6 */
123#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p)
124
125#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
126
127/* db_off bitmask - bits 0:1 reserved */
128#define DBOFF_MASK (~0x3)
129
130/* run_regs_off bitmask - bits 0:4 reserved */
131#define RTSOFF_MASK (~0x1f)
132
133/* HCCPARAMS2 - hcc_params2 - bitmasks */
134/* true: HC supports U3 entry Capability */
135#define HCC2_U3C(p) ((p) & (1 << 0))
136/* true: HC supports Configure endpoint command Max exit latency too large */
137#define HCC2_CMC(p) ((p) & (1 << 1))
138/* true: HC supports Force Save context Capability */
139#define HCC2_FSC(p) ((p) & (1 << 2))
140/* true: HC supports Compliance Transition Capability */
141#define HCC2_CTC(p) ((p) & (1 << 3))
142/* true: HC support Large ESIT payload Capability > 48k */
143#define HCC2_LEC(p) ((p) & (1 << 4))
144/* true: HC support Configuration Information Capability */
145#define HCC2_CIC(p) ((p) & (1 << 5))
146/* true: HC support Extended TBC Capability, Isoc burst count > 65535 */
147#define HCC2_ETC(p) ((p) & (1 << 6))
148
149/* Number of registers per port */
150#define NUM_PORT_REGS 4
151
152#define PORTSC 0
153#define PORTPMSC 1
154#define PORTLI 2
155#define PORTHLPMC 3
156
157/**
158 * struct xhci_op_regs - xHCI Host Controller Operational Registers.
159 * @command: USBCMD - xHC command register
160 * @status: USBSTS - xHC status register
161 * @page_size: This indicates the page size that the host controller
162 * supports. If bit n is set, the HC supports a page size
163 * of 2^(n+12), up to a 128MB page size.
164 * 4K is the minimum page size.
165 * @cmd_ring: CRP - 64-bit Command Ring Pointer
166 * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer
167 * @config_reg: CONFIG - Configure Register
168 * @port_status_base: PORTSCn - base address for Port Status and Control
169 * Each port has a Port Status and Control register,
170 * followed by a Port Power Management Status and Control
171 * register, a Port Link Info register, and a reserved
172 * register.
173 * @port_power_base: PORTPMSCn - base address for
174 * Port Power Management Status and Control
175 * @port_link_base: PORTLIn - base address for Port Link Info (current
176 * Link PM state and control) for USB 2.1 and USB 3.0
177 * devices.
178 */
179struct xhci_op_regs {
180 __le32 command;
181 __le32 status;
182 __le32 page_size;
183 __le32 reserved1;
184 __le32 reserved2;
185 __le32 dev_notification;
186 __le64 cmd_ring;
187 /* rsvd: offset 0x20-2F */
188 __le32 reserved3[4];
189 __le64 dcbaa_ptr;
190 __le32 config_reg;
191 /* rsvd: offset 0x3C-3FF */
192 __le32 reserved4[241];
193 /* port 1 registers, which serve as a base address for other ports */
194 __le32 port_status_base;
195 __le32 port_power_base;
196 __le32 port_link_base;
197 __le32 reserved5;
198 /* registers for ports 2-255 */
199 __le32 reserved6[NUM_PORT_REGS*254];
200};
201
202/* USBCMD - USB command - command bitmasks */
203/* start/stop HC execution - do not write unless HC is halted*/
204#define CMD_RUN XHCI_CMD_RUN
205/* Reset HC - resets internal HC state machine and all registers (except
206 * PCI config regs). HC does NOT drive a USB reset on the downstream ports.
207 * The xHCI driver must reinitialize the xHC after setting this bit.
208 */
209#define CMD_RESET (1 << 1)
210/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
211#define CMD_EIE XHCI_CMD_EIE
212/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
213#define CMD_HSEIE XHCI_CMD_HSEIE
214/* bits 4:6 are reserved (and should be preserved on writes). */
215/* light reset (port status stays unchanged) - reset completed when this is 0 */
216#define CMD_LRESET (1 << 7)
217/* host controller save/restore state. */
218#define CMD_CSS (1 << 8)
219#define CMD_CRS (1 << 9)
220/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
221#define CMD_EWE XHCI_CMD_EWE
222/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
223 * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
224 * '0' means the xHC can power it off if all ports are in the disconnect,
225 * disabled, or powered-off state.
226 */
227#define CMD_PM_INDEX (1 << 11)
228/* bit 14 Extended TBC Enable, changes Isoc TRB fields to support larger TBC */
229#define CMD_ETE (1 << 14)
230/* bits 15:31 are reserved (and should be preserved on writes). */
231
232#define XHCI_RESET_LONG_USEC (10 * 1000 * 1000)
233#define XHCI_RESET_SHORT_USEC (250 * 1000)
234
235/* IMAN - Interrupt Management Register */
236#define IMAN_IE (1 << 1)
237#define IMAN_IP (1 << 0)
238
239/* USBSTS - USB status - status bitmasks */
240/* HC not running - set to 1 when run/stop bit is cleared. */
241#define STS_HALT XHCI_STS_HALT
242/* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */
243#define STS_FATAL (1 << 2)
244/* event interrupt - clear this prior to clearing any IP flags in IR set*/
245#define STS_EINT (1 << 3)
246/* port change detect */
247#define STS_PORT (1 << 4)
248/* bits 5:7 reserved and zeroed */
249/* save state status - '1' means xHC is saving state */
250#define STS_SAVE (1 << 8)
251/* restore state status - '1' means xHC is restoring state */
252#define STS_RESTORE (1 << 9)
253/* true: save or restore error */
254#define STS_SRE (1 << 10)
255/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
256#define STS_CNR XHCI_STS_CNR
257/* true: internal Host Controller Error - SW needs to reset and reinitialize */
258#define STS_HCE (1 << 12)
259/* bits 13:31 reserved and should be preserved */
260
261/*
262 * DNCTRL - Device Notification Control Register - dev_notification bitmasks
263 * Generate a device notification event when the HC sees a transaction with a
264 * notification type that matches a bit set in this bit field.
265 */
266#define DEV_NOTE_MASK (0xffff)
267#define ENABLE_DEV_NOTE(x) (1 << (x))
268/* Most of the device notification types should only be used for debug.
269 * SW does need to pay attention to function wake notifications.
270 */
271#define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1)
272
273/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
274/* bit 0 is the command ring cycle state */
275/* stop ring operation after completion of the currently executing command */
276#define CMD_RING_PAUSE (1 << 1)
277/* stop ring immediately - abort the currently executing command */
278#define CMD_RING_ABORT (1 << 2)
279/* true: command ring is running */
280#define CMD_RING_RUNNING (1 << 3)
281/* bits 4:5 reserved and should be preserved */
282/* Command Ring pointer - bit mask for the lower 32 bits. */
283#define CMD_RING_RSVD_BITS (0x3f)
284
285/* CONFIG - Configure Register - config_reg bitmasks */
286/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
287#define MAX_DEVS(p) ((p) & 0xff)
288/* bit 8: U3 Entry Enabled, assert PLC when root port enters U3, xhci 1.1 */
289#define CONFIG_U3E (1 << 8)
290/* bit 9: Configuration Information Enable, xhci 1.1 */
291#define CONFIG_CIE (1 << 9)
292/* bits 10:31 - reserved and should be preserved */
293
294/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
295/* true: device connected */
296#define PORT_CONNECT (1 << 0)
297/* true: port enabled */
298#define PORT_PE (1 << 1)
299/* bit 2 reserved and zeroed */
300/* true: port has an over-current condition */
301#define PORT_OC (1 << 3)
302/* true: port reset signaling asserted */
303#define PORT_RESET (1 << 4)
304/* Port Link State - bits 5:8
305 * A read gives the current link PM state of the port,
306 * a write with Link State Write Strobe set sets the link state.
307 */
308#define PORT_PLS_MASK (0xf << 5)
309#define XDEV_U0 (0x0 << 5)
310#define XDEV_U1 (0x1 << 5)
311#define XDEV_U2 (0x2 << 5)
312#define XDEV_U3 (0x3 << 5)
313#define XDEV_DISABLED (0x4 << 5)
314#define XDEV_RXDETECT (0x5 << 5)
315#define XDEV_INACTIVE (0x6 << 5)
316#define XDEV_POLLING (0x7 << 5)
317#define XDEV_RECOVERY (0x8 << 5)
318#define XDEV_HOT_RESET (0x9 << 5)
319#define XDEV_COMP_MODE (0xa << 5)
320#define XDEV_TEST_MODE (0xb << 5)
321#define XDEV_RESUME (0xf << 5)
322
323/* true: port has power (see HCC_PPC) */
324#define PORT_POWER (1 << 9)
325/* bits 10:13 indicate device speed:
326 * 0 - undefined speed - port hasn't be initialized by a reset yet
327 * 1 - full speed
328 * 2 - low speed
329 * 3 - high speed
330 * 4 - super speed
331 * 5-15 reserved
332 */
333#define DEV_SPEED_MASK (0xf << 10)
334#define XDEV_FS (0x1 << 10)
335#define XDEV_LS (0x2 << 10)
336#define XDEV_HS (0x3 << 10)
337#define XDEV_SS (0x4 << 10)
338#define XDEV_SSP (0x5 << 10)
339#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10))
340#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
341#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS)
342#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
343#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
344#define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP)
345#define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS)
346#define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f)
347
348/* Bits 20:23 in the Slot Context are the speed for the device */
349#define SLOT_SPEED_FS (XDEV_FS << 10)
350#define SLOT_SPEED_LS (XDEV_LS << 10)
351#define SLOT_SPEED_HS (XDEV_HS << 10)
352#define SLOT_SPEED_SS (XDEV_SS << 10)
353#define SLOT_SPEED_SSP (XDEV_SSP << 10)
354/* Port Indicator Control */
355#define PORT_LED_OFF (0 << 14)
356#define PORT_LED_AMBER (1 << 14)
357#define PORT_LED_GREEN (2 << 14)
358#define PORT_LED_MASK (3 << 14)
359/* Port Link State Write Strobe - set this when changing link state */
360#define PORT_LINK_STROBE (1 << 16)
361/* true: connect status change */
362#define PORT_CSC (1 << 17)
363/* true: port enable change */
364#define PORT_PEC (1 << 18)
365/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port
366 * into an enabled state, and the device into the default state. A "warm" reset
367 * also resets the link, forcing the device through the link training sequence.
368 * SW can also look at the Port Reset register to see when warm reset is done.
369 */
370#define PORT_WRC (1 << 19)
371/* true: over-current change */
372#define PORT_OCC (1 << 20)
373/* true: reset change - 1 to 0 transition of PORT_RESET */
374#define PORT_RC (1 << 21)
375/* port link status change - set on some port link state transitions:
376 * Transition Reason
377 * ------------------------------------------------------------------------------
378 * - U3 to Resume Wakeup signaling from a device
379 * - Resume to Recovery to U0 USB 3.0 device resume
380 * - Resume to U0 USB 2.0 device resume
381 * - U3 to Recovery to U0 Software resume of USB 3.0 device complete
382 * - U3 to U0 Software resume of USB 2.0 device complete
383 * - U2 to U0 L1 resume of USB 2.1 device complete
384 * - U0 to U0 (???) L1 entry rejection by USB 2.1 device
385 * - U0 to disabled L1 entry error with USB 2.1 device
386 * - Any state to inactive Error on USB 3.0 port
387 */
388#define PORT_PLC (1 << 22)
389/* port configure error change - port failed to configure its link partner */
390#define PORT_CEC (1 << 23)
391#define PORT_CHANGE_MASK (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
392 PORT_RC | PORT_PLC | PORT_CEC)
393
394
395/* Cold Attach Status - xHC can set this bit to report device attached during
396 * Sx state. Warm port reset should be perfomed to clear this bit and move port
397 * to connected state.
398 */
399#define PORT_CAS (1 << 24)
400/* wake on connect (enable) */
401#define PORT_WKCONN_E (1 << 25)
402/* wake on disconnect (enable) */
403#define PORT_WKDISC_E (1 << 26)
404/* wake on over-current (enable) */
405#define PORT_WKOC_E (1 << 27)
406/* bits 28:29 reserved */
407/* true: device is non-removable - for USB 3.0 roothub emulation */
408#define PORT_DEV_REMOVE (1 << 30)
409/* Initiate a warm port reset - complete when PORT_WRC is '1' */
410#define PORT_WR (1 << 31)
411
412/* We mark duplicate entries with -1 */
413#define DUPLICATE_ENTRY ((u8)(-1))
414
415/* Port Power Management Status and Control - port_power_base bitmasks */
416/* Inactivity timer value for transitions into U1, in microseconds.
417 * Timeout can be up to 127us. 0xFF means an infinite timeout.
418 */
419#define PORT_U1_TIMEOUT(p) ((p) & 0xff)
420#define PORT_U1_TIMEOUT_MASK 0xff
421/* Inactivity timer value for transitions into U2 */
422#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8)
423#define PORT_U2_TIMEOUT_MASK (0xff << 8)
424/* Bits 24:31 for port testing */
425
426/* USB2 Protocol PORTSPMSC */
427#define PORT_L1S_MASK 7
428#define PORT_L1S_SUCCESS 1
429#define PORT_RWE (1 << 3)
430#define PORT_HIRD(p) (((p) & 0xf) << 4)
431#define PORT_HIRD_MASK (0xf << 4)
432#define PORT_L1DS_MASK (0xff << 8)
433#define PORT_L1DS(p) (((p) & 0xff) << 8)
434#define PORT_HLE (1 << 16)
435#define PORT_TEST_MODE_SHIFT 28
436
437/* USB3 Protocol PORTLI Port Link Information */
438#define PORT_RX_LANES(p) (((p) >> 16) & 0xf)
439#define PORT_TX_LANES(p) (((p) >> 20) & 0xf)
440
441/* USB2 Protocol PORTHLPMC */
442#define PORT_HIRDM(p)((p) & 3)
443#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2)
444#define PORT_BESLD(p)(((p) & 0xf) << 10)
445
446/* use 512 microseconds as USB2 LPM L1 default timeout. */
447#define XHCI_L1_TIMEOUT 512
448
449/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency.
450 * Safe to use with mixed HIRD and BESL systems (host and device) and is used
451 * by other operating systems.
452 *
453 * XHCI 1.0 errata 8/14/12 Table 13 notes:
454 * "Software should choose xHC BESL/BESLD field values that do not violate a
455 * device's resume latency requirements,
456 * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached,
457 * or not program values < '4' if BLC = '0' and a BESL device is attached.
458 */
459#define XHCI_DEFAULT_BESL 4
460
461/*
462 * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports
463 * to complete link training. usually link trainig completes much faster
464 * so check status 10 times with 36ms sleep in places we need to wait for
465 * polling to complete.
466 */
467#define XHCI_PORT_POLLING_LFPS_TIME 36
468
469/**
470 * struct xhci_intr_reg - Interrupt Register Set
471 * @irq_pending: IMAN - Interrupt Management Register. Used to enable
472 * interrupts and check for pending interrupts.
473 * @irq_control: IMOD - Interrupt Moderation Register.
474 * Used to throttle interrupts.
475 * @erst_size: Number of segments in the Event Ring Segment Table (ERST).
476 * @erst_base: ERST base address.
477 * @erst_dequeue: Event ring dequeue pointer.
478 *
479 * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
480 * Ring Segment Table (ERST) associated with it. The event ring is comprised of
481 * multiple segments of the same size. The HC places events on the ring and
482 * "updates the Cycle bit in the TRBs to indicate to software the current
483 * position of the Enqueue Pointer." The HCD (Linux) processes those events and
484 * updates the dequeue pointer.
485 */
486struct xhci_intr_reg {
487 __le32 irq_pending;
488 __le32 irq_control;
489 __le32 erst_size;
490 __le32 rsvd;
491 __le64 erst_base;
492 __le64 erst_dequeue;
493};
494
495/* irq_pending bitmasks */
496#define ER_IRQ_PENDING(p) ((p) & 0x1)
497/* bits 2:31 need to be preserved */
498/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
499#define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe)
500#define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2)
501#define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2))
502
503/* irq_control bitmasks */
504/* Minimum interval between interrupts (in 250ns intervals). The interval
505 * between interrupts will be longer if there are no events on the event ring.
506 * Default is 4000 (1 ms).
507 */
508#define ER_IRQ_INTERVAL_MASK (0xffff)
509/* Counter used to count down the time to the next interrupt - HW use only */
510#define ER_IRQ_COUNTER_MASK (0xffff << 16)
511
512/* erst_size bitmasks */
513/* Preserve bits 16:31 of erst_size */
514#define ERST_SIZE_MASK (0xffff << 16)
515
516/* erst_dequeue bitmasks */
517/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
518 * where the current dequeue pointer lies. This is an optional HW hint.
519 */
520#define ERST_DESI_MASK (0x7)
521/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
522 * a work queue (or delayed service routine)?
523 */
524#define ERST_EHB (1 << 3)
525#define ERST_PTR_MASK (0xf)
526
527/**
528 * struct xhci_run_regs
529 * @microframe_index:
530 * MFINDEX - current microframe number
531 *
532 * Section 5.5 Host Controller Runtime Registers:
533 * "Software should read and write these registers using only Dword (32 bit)
534 * or larger accesses"
535 */
536struct xhci_run_regs {
537 __le32 microframe_index;
538 __le32 rsvd[7];
539 struct xhci_intr_reg ir_set[128];
540};
541
542/**
543 * struct doorbell_array
544 *
545 * Bits 0 - 7: Endpoint target
546 * Bits 8 - 15: RsvdZ
547 * Bits 16 - 31: Stream ID
548 *
549 * Section 5.6
550 */
551struct xhci_doorbell_array {
552 __le32 doorbell[256];
553};
554
555#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
556#define DB_VALUE_HOST 0x00000000
557
558/**
559 * struct xhci_protocol_caps
560 * @revision: major revision, minor revision, capability ID,
561 * and next capability pointer.
562 * @name_string: Four ASCII characters to say which spec this xHC
563 * follows, typically "USB ".
564 * @port_info: Port offset, count, and protocol-defined information.
565 */
566struct xhci_protocol_caps {
567 u32 revision;
568 u32 name_string;
569 u32 port_info;
570};
571
572#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
573#define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff)
574#define XHCI_EXT_PORT_PSIC(x) (((x) >> 28) & 0x0f)
575#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
576#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
577
578#define XHCI_EXT_PORT_PSIV(x) (((x) >> 0) & 0x0f)
579#define XHCI_EXT_PORT_PSIE(x) (((x) >> 4) & 0x03)
580#define XHCI_EXT_PORT_PLT(x) (((x) >> 6) & 0x03)
581#define XHCI_EXT_PORT_PFD(x) (((x) >> 8) & 0x01)
582#define XHCI_EXT_PORT_LP(x) (((x) >> 14) & 0x03)
583#define XHCI_EXT_PORT_PSIM(x) (((x) >> 16) & 0xffff)
584
585#define PLT_MASK (0x03 << 6)
586#define PLT_SYM (0x00 << 6)
587#define PLT_ASYM_RX (0x02 << 6)
588#define PLT_ASYM_TX (0x03 << 6)
589
590/**
591 * struct xhci_container_ctx
592 * @type: Type of context. Used to calculated offsets to contained contexts.
593 * @size: Size of the context data
594 * @bytes: The raw context data given to HW
595 * @dma: dma address of the bytes
596 *
597 * Represents either a Device or Input context. Holds a pointer to the raw
598 * memory used for the context (bytes) and dma address of it (dma).
599 */
600struct xhci_container_ctx {
601 unsigned type;
602#define XHCI_CTX_TYPE_DEVICE 0x1
603#define XHCI_CTX_TYPE_INPUT 0x2
604
605 int size;
606
607 u8 *bytes;
608 dma_addr_t dma;
609};
610
611/**
612 * struct xhci_slot_ctx
613 * @dev_info: Route string, device speed, hub info, and last valid endpoint
614 * @dev_info2: Max exit latency for device number, root hub port number
615 * @tt_info: tt_info is used to construct split transaction tokens
616 * @dev_state: slot state and device address
617 *
618 * Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context
619 * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
620 * reserved at the end of the slot context for HC internal use.
621 */
622struct xhci_slot_ctx {
623 __le32 dev_info;
624 __le32 dev_info2;
625 __le32 tt_info;
626 __le32 dev_state;
627 /* offset 0x10 to 0x1f reserved for HC internal use */
628 __le32 reserved[4];
629};
630
631/* dev_info bitmasks */
632/* Route String - 0:19 */
633#define ROUTE_STRING_MASK (0xfffff)
634/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
635#define DEV_SPEED (0xf << 20)
636#define GET_DEV_SPEED(n) (((n) & DEV_SPEED) >> 20)
637/* bit 24 reserved */
638/* Is this LS/FS device connected through a HS hub? - bit 25 */
639#define DEV_MTT (0x1 << 25)
640/* Set if the device is a hub - bit 26 */
641#define DEV_HUB (0x1 << 26)
642/* Index of the last valid endpoint context in this device context - 27:31 */
643#define LAST_CTX_MASK (0x1f << 27)
644#define LAST_CTX(p) ((p) << 27)
645#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
646#define SLOT_FLAG (1 << 0)
647#define EP0_FLAG (1 << 1)
648
649/* dev_info2 bitmasks */
650/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
651#define MAX_EXIT (0xffff)
652/* Root hub port number that is needed to access the USB device */
653#define ROOT_HUB_PORT(p) (((p) & 0xff) << 16)
654#define DEVINFO_TO_ROOT_HUB_PORT(p) (((p) >> 16) & 0xff)
655/* Maximum number of ports under a hub device */
656#define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24)
657#define DEVINFO_TO_MAX_PORTS(p) (((p) & (0xff << 24)) >> 24)
658
659/* tt_info bitmasks */
660/*
661 * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
662 * The Slot ID of the hub that isolates the high speed signaling from
663 * this low or full-speed device. '0' if attached to root hub port.
664 */
665#define TT_SLOT (0xff)
666/*
667 * The number of the downstream facing port of the high-speed hub
668 * '0' if the device is not low or full speed.
669 */
670#define TT_PORT (0xff << 8)
671#define TT_THINK_TIME(p) (((p) & 0x3) << 16)
672#define GET_TT_THINK_TIME(p) (((p) & (0x3 << 16)) >> 16)
673
674/* dev_state bitmasks */
675/* USB device address - assigned by the HC */
676#define DEV_ADDR_MASK (0xff)
677/* bits 8:26 reserved */
678/* Slot state */
679#define SLOT_STATE (0x1f << 27)
680#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
681
682#define SLOT_STATE_DISABLED 0
683#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED
684#define SLOT_STATE_DEFAULT 1
685#define SLOT_STATE_ADDRESSED 2
686#define SLOT_STATE_CONFIGURED 3
687
688/**
689 * struct xhci_ep_ctx
690 * @ep_info: endpoint state, streams, mult, and interval information.
691 * @ep_info2: information on endpoint type, max packet size, max burst size,
692 * error count, and whether the HC will force an event for all
693 * transactions.
694 * @deq: 64-bit ring dequeue pointer address. If the endpoint only
695 * defines one stream, this points to the endpoint transfer ring.
696 * Otherwise, it points to a stream context array, which has a
697 * ring pointer for each flow.
698 * @tx_info:
699 * Average TRB lengths for the endpoint ring and
700 * max payload within an Endpoint Service Interval Time (ESIT).
701 *
702 * Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context
703 * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
704 * reserved at the end of the endpoint context for HC internal use.
705 */
706struct xhci_ep_ctx {
707 __le32 ep_info;
708 __le32 ep_info2;
709 __le64 deq;
710 __le32 tx_info;
711 /* offset 0x14 - 0x1f reserved for HC internal use */
712 __le32 reserved[3];
713};
714
715/* ep_info bitmasks */
716/*
717 * Endpoint State - bits 0:2
718 * 0 - disabled
719 * 1 - running
720 * 2 - halted due to halt condition - ok to manipulate endpoint ring
721 * 3 - stopped
722 * 4 - TRB error
723 * 5-7 - reserved
724 */
725#define EP_STATE_MASK (0x7)
726#define EP_STATE_DISABLED 0
727#define EP_STATE_RUNNING 1
728#define EP_STATE_HALTED 2
729#define EP_STATE_STOPPED 3
730#define EP_STATE_ERROR 4
731#define GET_EP_CTX_STATE(ctx) (le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK)
732
733/* Mult - Max number of burtst within an interval, in EP companion desc. */
734#define EP_MULT(p) (((p) & 0x3) << 8)
735#define CTX_TO_EP_MULT(p) (((p) >> 8) & 0x3)
736/* bits 10:14 are Max Primary Streams */
737/* bit 15 is Linear Stream Array */
738/* Interval - period between requests to an endpoint - 125u increments. */
739#define EP_INTERVAL(p) (((p) & 0xff) << 16)
740#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff))
741#define CTX_TO_EP_INTERVAL(p) (((p) >> 16) & 0xff)
742#define EP_MAXPSTREAMS_MASK (0x1f << 10)
743#define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK)
744#define CTX_TO_EP_MAXPSTREAMS(p) (((p) & EP_MAXPSTREAMS_MASK) >> 10)
745/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
746#define EP_HAS_LSA (1 << 15)
747/* hosts with LEC=1 use bits 31:24 as ESIT high bits. */
748#define CTX_TO_MAX_ESIT_PAYLOAD_HI(p) (((p) >> 24) & 0xff)
749
750/* ep_info2 bitmasks */
751/*
752 * Force Event - generate transfer events for all TRBs for this endpoint
753 * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
754 */
755#define FORCE_EVENT (0x1)
756#define ERROR_COUNT(p) (((p) & 0x3) << 1)
757#define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7)
758#define EP_TYPE(p) ((p) << 3)
759#define ISOC_OUT_EP 1
760#define BULK_OUT_EP 2
761#define INT_OUT_EP 3
762#define CTRL_EP 4
763#define ISOC_IN_EP 5
764#define BULK_IN_EP 6
765#define INT_IN_EP 7
766/* bit 6 reserved */
767/* bit 7 is Host Initiate Disable - for disabling stream selection */
768#define MAX_BURST(p) (((p)&0xff) << 8)
769#define CTX_TO_MAX_BURST(p) (((p) >> 8) & 0xff)
770#define MAX_PACKET(p) (((p)&0xffff) << 16)
771#define MAX_PACKET_MASK (0xffff << 16)
772#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)
773
774/* tx_info bitmasks */
775#define EP_AVG_TRB_LENGTH(p) ((p) & 0xffff)
776#define EP_MAX_ESIT_PAYLOAD_LO(p) (((p) & 0xffff) << 16)
777#define EP_MAX_ESIT_PAYLOAD_HI(p) ((((p) >> 16) & 0xff) << 24)
778#define CTX_TO_MAX_ESIT_PAYLOAD(p) (((p) >> 16) & 0xffff)
779
780/* deq bitmasks */
781#define EP_CTX_CYCLE_MASK (1 << 0)
782#define SCTX_DEQ_MASK (~0xfL)
783
784
785/**
786 * struct xhci_input_control_context
787 * Input control context; see section 6.2.5.
788 *
789 * @drop_context: set the bit of the endpoint context you want to disable
790 * @add_context: set the bit of the endpoint context you want to enable
791 */
792struct xhci_input_control_ctx {
793 __le32 drop_flags;
794 __le32 add_flags;
795 __le32 rsvd2[6];
796};
797
798#define EP_IS_ADDED(ctrl_ctx, i) \
799 (le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))
800#define EP_IS_DROPPED(ctrl_ctx, i) \
801 (le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1)))
802
803/* Represents everything that is needed to issue a command on the command ring.
804 * It's useful to pre-allocate these for commands that cannot fail due to
805 * out-of-memory errors, like freeing streams.
806 */
807struct xhci_command {
808 /* Input context for changing device state */
809 struct xhci_container_ctx *in_ctx;
810 u32 status;
811 int slot_id;
812 /* If completion is null, no one is waiting on this command
813 * and the structure can be freed after the command completes.
814 */
815 struct completion *completion;
816 union xhci_trb *command_trb;
817 struct list_head cmd_list;
818};
819
820/* drop context bitmasks */
821#define DROP_EP(x) (0x1 << x)
822/* add context bitmasks */
823#define ADD_EP(x) (0x1 << x)
824
825struct xhci_stream_ctx {
826 /* 64-bit stream ring address, cycle state, and stream type */
827 __le64 stream_ring;
828 /* offset 0x14 - 0x1f reserved for HC internal use */
829 __le32 reserved[2];
830};
831
832/* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */
833#define SCT_FOR_CTX(p) (((p) & 0x7) << 1)
834/* Secondary stream array type, dequeue pointer is to a transfer ring */
835#define SCT_SEC_TR 0
836/* Primary stream array type, dequeue pointer is to a transfer ring */
837#define SCT_PRI_TR 1
838/* Dequeue pointer is for a secondary stream array (SSA) with 8 entries */
839#define SCT_SSA_8 2
840#define SCT_SSA_16 3
841#define SCT_SSA_32 4
842#define SCT_SSA_64 5
843#define SCT_SSA_128 6
844#define SCT_SSA_256 7
845
846/* Assume no secondary streams for now */
847struct xhci_stream_info {
848 struct xhci_ring **stream_rings;
849 /* Number of streams, including stream 0 (which drivers can't use) */
850 unsigned int num_streams;
851 /* The stream context array may be bigger than
852 * the number of streams the driver asked for
853 */
854 struct xhci_stream_ctx *stream_ctx_array;
855 unsigned int num_stream_ctxs;
856 dma_addr_t ctx_array_dma;
857 /* For mapping physical TRB addresses to segments in stream rings */
858 struct radix_tree_root trb_address_map;
859 struct xhci_command *free_streams_command;
860};
861
862#define SMALL_STREAM_ARRAY_SIZE 256
863#define MEDIUM_STREAM_ARRAY_SIZE 1024
864
865/* Some Intel xHCI host controllers need software to keep track of the bus
866 * bandwidth. Keep track of endpoint info here. Each root port is allocated
867 * the full bus bandwidth. We must also treat TTs (including each port under a
868 * multi-TT hub) as a separate bandwidth domain. The direct memory interface
869 * (DMI) also limits the total bandwidth (across all domains) that can be used.
870 */
871struct xhci_bw_info {
872 /* ep_interval is zero-based */
873 unsigned int ep_interval;
874 /* mult and num_packets are one-based */
875 unsigned int mult;
876 unsigned int num_packets;
877 unsigned int max_packet_size;
878 unsigned int max_esit_payload;
879 unsigned int type;
880};
881
882/* "Block" sizes in bytes the hardware uses for different device speeds.
883 * The logic in this part of the hardware limits the number of bits the hardware
884 * can use, so must represent bandwidth in a less precise manner to mimic what
885 * the scheduler hardware computes.
886 */
887#define FS_BLOCK 1
888#define HS_BLOCK 4
889#define SS_BLOCK 16
890#define DMI_BLOCK 32
891
892/* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated
893 * with each byte transferred. SuperSpeed devices have an initial overhead to
894 * set up bursts. These are in blocks, see above. LS overhead has already been
895 * translated into FS blocks.
896 */
897#define DMI_OVERHEAD 8
898#define DMI_OVERHEAD_BURST 4
899#define SS_OVERHEAD 8
900#define SS_OVERHEAD_BURST 32
901#define HS_OVERHEAD 26
902#define FS_OVERHEAD 20
903#define LS_OVERHEAD 128
904/* The TTs need to claim roughly twice as much bandwidth (94 bytes per
905 * microframe ~= 24Mbps) of the HS bus as the devices can actually use because
906 * of overhead associated with split transfers crossing microframe boundaries.
907 * 31 blocks is pure protocol overhead.
908 */
909#define TT_HS_OVERHEAD (31 + 94)
910#define TT_DMI_OVERHEAD (25 + 12)
911
912/* Bandwidth limits in blocks */
913#define FS_BW_LIMIT 1285
914#define TT_BW_LIMIT 1320
915#define HS_BW_LIMIT 1607
916#define SS_BW_LIMIT_IN 3906
917#define DMI_BW_LIMIT_IN 3906
918#define SS_BW_LIMIT_OUT 3906
919#define DMI_BW_LIMIT_OUT 3906
920
921/* Percentage of bus bandwidth reserved for non-periodic transfers */
922#define FS_BW_RESERVED 10
923#define HS_BW_RESERVED 20
924#define SS_BW_RESERVED 10
925
926struct xhci_virt_ep {
927 struct xhci_virt_device *vdev; /* parent */
928 unsigned int ep_index;
929 struct xhci_ring *ring;
930 /* Related to endpoints that are configured to use stream IDs only */
931 struct xhci_stream_info *stream_info;
932 /* Temporary storage in case the configure endpoint command fails and we
933 * have to restore the device state to the previous state
934 */
935 struct xhci_ring *new_ring;
936 unsigned int err_count;
937 unsigned int ep_state;
938#define SET_DEQ_PENDING (1 << 0)
939#define EP_HALTED (1 << 1) /* For stall handling */
940#define EP_STOP_CMD_PENDING (1 << 2) /* For URB cancellation */
941/* Transitioning the endpoint to using streams, don't enqueue URBs */
942#define EP_GETTING_STREAMS (1 << 3)
943#define EP_HAS_STREAMS (1 << 4)
944/* Transitioning the endpoint to not using streams, don't enqueue URBs */
945#define EP_GETTING_NO_STREAMS (1 << 5)
946#define EP_HARD_CLEAR_TOGGLE (1 << 6)
947#define EP_SOFT_CLEAR_TOGGLE (1 << 7)
948/* usb_hub_clear_tt_buffer is in progress */
949#define EP_CLEARING_TT (1 << 8)
950 /* ---- Related to URB cancellation ---- */
951 struct list_head cancelled_td_list;
952 struct xhci_hcd *xhci;
953 /* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue
954 * command. We'll need to update the ring's dequeue segment and dequeue
955 * pointer after the command completes.
956 */
957 struct xhci_segment *queued_deq_seg;
958 union xhci_trb *queued_deq_ptr;
959 /*
960 * Sometimes the xHC can not process isochronous endpoint ring quickly
961 * enough, and it will miss some isoc tds on the ring and generate
962 * a Missed Service Error Event.
963 * Set skip flag when receive a Missed Service Error Event and
964 * process the missed tds on the endpoint ring.
965 */
966 bool skip;
967 /* Bandwidth checking storage */
968 struct xhci_bw_info bw_info;
969 struct list_head bw_endpoint_list;
970 /* Isoch Frame ID checking storage */
971 int next_frame_id;
972 /* Use new Isoch TRB layout needed for extended TBC support */
973 bool use_extended_tbc;
974};
975
976enum xhci_overhead_type {
977 LS_OVERHEAD_TYPE = 0,
978 FS_OVERHEAD_TYPE,
979 HS_OVERHEAD_TYPE,
980};
981
982struct xhci_interval_bw {
983 unsigned int num_packets;
984 /* Sorted by max packet size.
985 * Head of the list is the greatest max packet size.
986 */
987 struct list_head endpoints;
988 /* How many endpoints of each speed are present. */
989 unsigned int overhead[3];
990};
991
992#define XHCI_MAX_INTERVAL 16
993
994struct xhci_interval_bw_table {
995 unsigned int interval0_esit_payload;
996 struct xhci_interval_bw interval_bw[XHCI_MAX_INTERVAL];
997 /* Includes reserved bandwidth for async endpoints */
998 unsigned int bw_used;
999 unsigned int ss_bw_in;
1000 unsigned int ss_bw_out;
1001};
1002
1003#define EP_CTX_PER_DEV 31
1004
1005struct xhci_virt_device {
1006 int slot_id;
1007 struct usb_device *udev;
1008 /*
1009 * Commands to the hardware are passed an "input context" that
1010 * tells the hardware what to change in its data structures.
1011 * The hardware will return changes in an "output context" that
1012 * software must allocate for the hardware. We need to keep
1013 * track of input and output contexts separately because
1014 * these commands might fail and we don't trust the hardware.
1015 */
1016 struct xhci_container_ctx *out_ctx;
1017 /* Used for addressing devices and configuration changes */
1018 struct xhci_container_ctx *in_ctx;
1019 struct xhci_virt_ep eps[EP_CTX_PER_DEV];
1020 u8 fake_port;
1021 u8 real_port;
1022 struct xhci_interval_bw_table *bw_table;
1023 struct xhci_tt_bw_info *tt_info;
1024 /*
1025 * flags for state tracking based on events and issued commands.
1026 * Software can not rely on states from output contexts because of
1027 * latency between events and xHC updating output context values.
1028 * See xhci 1.1 section 4.8.3 for more details
1029 */
1030 unsigned long flags;
1031#define VDEV_PORT_ERROR BIT(0) /* Port error, link inactive */
1032
1033 /* The current max exit latency for the enabled USB3 link states. */
1034 u16 current_mel;
1035 /* Used for the debugfs interfaces. */
1036 void *debugfs_private;
1037};
1038
1039/*
1040 * For each roothub, keep track of the bandwidth information for each periodic
1041 * interval.
1042 *
1043 * If a high speed hub is attached to the roothub, each TT associated with that
1044 * hub is a separate bandwidth domain. The interval information for the
1045 * endpoints on the devices under that TT will appear in the TT structure.
1046 */
1047struct xhci_root_port_bw_info {
1048 struct list_head tts;
1049 unsigned int num_active_tts;
1050 struct xhci_interval_bw_table bw_table;
1051};
1052
1053struct xhci_tt_bw_info {
1054 struct list_head tt_list;
1055 int slot_id;
1056 int ttport;
1057 struct xhci_interval_bw_table bw_table;
1058 int active_eps;
1059};
1060
1061
1062/**
1063 * struct xhci_device_context_array
1064 * @dev_context_ptr array of 64-bit DMA addresses for device contexts
1065 */
1066struct xhci_device_context_array {
1067 /* 64-bit device addresses; we only write 32-bit addresses */
1068 __le64 dev_context_ptrs[MAX_HC_SLOTS];
1069 /* private xHCD pointers */
1070 dma_addr_t dma;
1071};
1072/* TODO: write function to set the 64-bit device DMA address */
1073/*
1074 * TODO: change this to be dynamically sized at HC mem init time since the HC
1075 * might not be able to handle the maximum number of devices possible.
1076 */
1077
1078
1079struct xhci_transfer_event {
1080 /* 64-bit buffer address, or immediate data */
1081 __le64 buffer;
1082 __le32 transfer_len;
1083 /* This field is interpreted differently based on the type of TRB */
1084 __le32 flags;
1085};
1086
1087/* Transfer event TRB length bit mask */
1088/* bits 0:23 */
1089#define EVENT_TRB_LEN(p) ((p) & 0xffffff)
1090
1091/** Transfer Event bit fields **/
1092#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
1093
1094/* Completion Code - only applicable for some types of TRBs */
1095#define COMP_CODE_MASK (0xff << 24)
1096#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
1097#define COMP_INVALID 0
1098#define COMP_SUCCESS 1
1099#define COMP_DATA_BUFFER_ERROR 2
1100#define COMP_BABBLE_DETECTED_ERROR 3
1101#define COMP_USB_TRANSACTION_ERROR 4
1102#define COMP_TRB_ERROR 5
1103#define COMP_STALL_ERROR 6
1104#define COMP_RESOURCE_ERROR 7
1105#define COMP_BANDWIDTH_ERROR 8
1106#define COMP_NO_SLOTS_AVAILABLE_ERROR 9
1107#define COMP_INVALID_STREAM_TYPE_ERROR 10
1108#define COMP_SLOT_NOT_ENABLED_ERROR 11
1109#define COMP_ENDPOINT_NOT_ENABLED_ERROR 12
1110#define COMP_SHORT_PACKET 13
1111#define COMP_RING_UNDERRUN 14
1112#define COMP_RING_OVERRUN 15
1113#define COMP_VF_EVENT_RING_FULL_ERROR 16
1114#define COMP_PARAMETER_ERROR 17
1115#define COMP_BANDWIDTH_OVERRUN_ERROR 18
1116#define COMP_CONTEXT_STATE_ERROR 19
1117#define COMP_NO_PING_RESPONSE_ERROR 20
1118#define COMP_EVENT_RING_FULL_ERROR 21
1119#define COMP_INCOMPATIBLE_DEVICE_ERROR 22
1120#define COMP_MISSED_SERVICE_ERROR 23
1121#define COMP_COMMAND_RING_STOPPED 24
1122#define COMP_COMMAND_ABORTED 25
1123#define COMP_STOPPED 26
1124#define COMP_STOPPED_LENGTH_INVALID 27
1125#define COMP_STOPPED_SHORT_PACKET 28
1126#define COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR 29
1127#define COMP_ISOCH_BUFFER_OVERRUN 31
1128#define COMP_EVENT_LOST_ERROR 32
1129#define COMP_UNDEFINED_ERROR 33
1130#define COMP_INVALID_STREAM_ID_ERROR 34
1131#define COMP_SECONDARY_BANDWIDTH_ERROR 35
1132#define COMP_SPLIT_TRANSACTION_ERROR 36
1133
1134static inline const char *xhci_trb_comp_code_string(u8 status)
1135{
1136 switch (status) {
1137 case COMP_INVALID:
1138 return "Invalid";
1139 case COMP_SUCCESS:
1140 return "Success";
1141 case COMP_DATA_BUFFER_ERROR:
1142 return "Data Buffer Error";
1143 case COMP_BABBLE_DETECTED_ERROR:
1144 return "Babble Detected";
1145 case COMP_USB_TRANSACTION_ERROR:
1146 return "USB Transaction Error";
1147 case COMP_TRB_ERROR:
1148 return "TRB Error";
1149 case COMP_STALL_ERROR:
1150 return "Stall Error";
1151 case COMP_RESOURCE_ERROR:
1152 return "Resource Error";
1153 case COMP_BANDWIDTH_ERROR:
1154 return "Bandwidth Error";
1155 case COMP_NO_SLOTS_AVAILABLE_ERROR:
1156 return "No Slots Available Error";
1157 case COMP_INVALID_STREAM_TYPE_ERROR:
1158 return "Invalid Stream Type Error";
1159 case COMP_SLOT_NOT_ENABLED_ERROR:
1160 return "Slot Not Enabled Error";
1161 case COMP_ENDPOINT_NOT_ENABLED_ERROR:
1162 return "Endpoint Not Enabled Error";
1163 case COMP_SHORT_PACKET:
1164 return "Short Packet";
1165 case COMP_RING_UNDERRUN:
1166 return "Ring Underrun";
1167 case COMP_RING_OVERRUN:
1168 return "Ring Overrun";
1169 case COMP_VF_EVENT_RING_FULL_ERROR:
1170 return "VF Event Ring Full Error";
1171 case COMP_PARAMETER_ERROR:
1172 return "Parameter Error";
1173 case COMP_BANDWIDTH_OVERRUN_ERROR:
1174 return "Bandwidth Overrun Error";
1175 case COMP_CONTEXT_STATE_ERROR:
1176 return "Context State Error";
1177 case COMP_NO_PING_RESPONSE_ERROR:
1178 return "No Ping Response Error";
1179 case COMP_EVENT_RING_FULL_ERROR:
1180 return "Event Ring Full Error";
1181 case COMP_INCOMPATIBLE_DEVICE_ERROR:
1182 return "Incompatible Device Error";
1183 case COMP_MISSED_SERVICE_ERROR:
1184 return "Missed Service Error";
1185 case COMP_COMMAND_RING_STOPPED:
1186 return "Command Ring Stopped";
1187 case COMP_COMMAND_ABORTED:
1188 return "Command Aborted";
1189 case COMP_STOPPED:
1190 return "Stopped";
1191 case COMP_STOPPED_LENGTH_INVALID:
1192 return "Stopped - Length Invalid";
1193 case COMP_STOPPED_SHORT_PACKET:
1194 return "Stopped - Short Packet";
1195 case COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR:
1196 return "Max Exit Latency Too Large Error";
1197 case COMP_ISOCH_BUFFER_OVERRUN:
1198 return "Isoch Buffer Overrun";
1199 case COMP_EVENT_LOST_ERROR:
1200 return "Event Lost Error";
1201 case COMP_UNDEFINED_ERROR:
1202 return "Undefined Error";
1203 case COMP_INVALID_STREAM_ID_ERROR:
1204 return "Invalid Stream ID Error";
1205 case COMP_SECONDARY_BANDWIDTH_ERROR:
1206 return "Secondary Bandwidth Error";
1207 case COMP_SPLIT_TRANSACTION_ERROR:
1208 return "Split Transaction Error";
1209 default:
1210 return "Unknown!!";
1211 }
1212}
1213
1214struct xhci_link_trb {
1215 /* 64-bit segment pointer*/
1216 __le64 segment_ptr;
1217 __le32 intr_target;
1218 __le32 control;
1219};
1220
1221/* control bitfields */
1222#define LINK_TOGGLE (0x1<<1)
1223
1224/* Command completion event TRB */
1225struct xhci_event_cmd {
1226 /* Pointer to command TRB, or the value passed by the event data trb */
1227 __le64 cmd_trb;
1228 __le32 status;
1229 __le32 flags;
1230};
1231
1232/* flags bitmasks */
1233
1234/* Address device - disable SetAddress */
1235#define TRB_BSR (1<<9)
1236
1237/* Configure Endpoint - Deconfigure */
1238#define TRB_DC (1<<9)
1239
1240/* Stop Ring - Transfer State Preserve */
1241#define TRB_TSP (1<<9)
1242
1243enum xhci_ep_reset_type {
1244 EP_HARD_RESET,
1245 EP_SOFT_RESET,
1246};
1247
1248/* Force Event */
1249#define TRB_TO_VF_INTR_TARGET(p) (((p) & (0x3ff << 22)) >> 22)
1250#define TRB_TO_VF_ID(p) (((p) & (0xff << 16)) >> 16)
1251
1252/* Set Latency Tolerance Value */
1253#define TRB_TO_BELT(p) (((p) & (0xfff << 16)) >> 16)
1254
1255/* Get Port Bandwidth */
1256#define TRB_TO_DEV_SPEED(p) (((p) & (0xf << 16)) >> 16)
1257
1258/* Force Header */
1259#define TRB_TO_PACKET_TYPE(p) ((p) & 0x1f)
1260#define TRB_TO_ROOTHUB_PORT(p) (((p) & (0xff << 24)) >> 24)
1261
1262enum xhci_setup_dev {
1263 SETUP_CONTEXT_ONLY,
1264 SETUP_CONTEXT_ADDRESS,
1265};
1266
1267/* bits 16:23 are the virtual function ID */
1268/* bits 24:31 are the slot ID */
1269#define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24)
1270#define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24)
1271
1272/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
1273#define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1)
1274#define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16)
1275
1276#define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23)
1277#define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23)
1278#define LAST_EP_INDEX 30
1279
1280/* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */
1281#define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16))
1282#define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16)
1283#define SCT_FOR_TRB(p) (((p) << 1) & 0x7)
1284
1285/* Link TRB specific fields */
1286#define TRB_TC (1<<1)
1287
1288/* Port Status Change Event TRB fields */
1289/* Port ID - bits 31:24 */
1290#define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24)
1291
1292#define EVENT_DATA (1 << 2)
1293
1294/* Normal TRB fields */
1295/* transfer_len bitmasks - bits 0:16 */
1296#define TRB_LEN(p) ((p) & 0x1ffff)
1297/* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31) */
1298#define TRB_TD_SIZE(p) (min((p), (u32)31) << 17)
1299#define GET_TD_SIZE(p) (((p) & 0x3e0000) >> 17)
1300/* xhci 1.1 uses the TD_SIZE field for TBC if Extended TBC is enabled (ETE) */
1301#define TRB_TD_SIZE_TBC(p) (min((p), (u32)31) << 17)
1302/* Interrupter Target - which MSI-X vector to target the completion event at */
1303#define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22)
1304#define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff)
1305/* Total burst count field, Rsvdz on xhci 1.1 with Extended TBC enabled (ETE) */
1306#define TRB_TBC(p) (((p) & 0x3) << 7)
1307#define TRB_TLBPC(p) (((p) & 0xf) << 16)
1308
1309/* Cycle bit - indicates TRB ownership by HC or HCD */
1310#define TRB_CYCLE (1<<0)
1311/*
1312 * Force next event data TRB to be evaluated before task switch.
1313 * Used to pass OS data back after a TD completes.
1314 */
1315#define TRB_ENT (1<<1)
1316/* Interrupt on short packet */
1317#define TRB_ISP (1<<2)
1318/* Set PCIe no snoop attribute */
1319#define TRB_NO_SNOOP (1<<3)
1320/* Chain multiple TRBs into a TD */
1321#define TRB_CHAIN (1<<4)
1322/* Interrupt on completion */
1323#define TRB_IOC (1<<5)
1324/* The buffer pointer contains immediate data */
1325#define TRB_IDT (1<<6)
1326/* TDs smaller than this might use IDT */
1327#define TRB_IDT_MAX_SIZE 8
1328
1329/* Block Event Interrupt */
1330#define TRB_BEI (1<<9)
1331
1332/* Control transfer TRB specific fields */
1333#define TRB_DIR_IN (1<<16)
1334#define TRB_TX_TYPE(p) ((p) << 16)
1335#define TRB_DATA_OUT 2
1336#define TRB_DATA_IN 3
1337
1338/* Isochronous TRB specific fields */
1339#define TRB_SIA (1<<31)
1340#define TRB_FRAME_ID(p) (((p) & 0x7ff) << 20)
1341
1342/* TRB cache size for xHC with TRB cache */
1343#define TRB_CACHE_SIZE_HS 8
1344#define TRB_CACHE_SIZE_SS 16
1345
1346struct xhci_generic_trb {
1347 __le32 field[4];
1348};
1349
1350union xhci_trb {
1351 struct xhci_link_trb link;
1352 struct xhci_transfer_event trans_event;
1353 struct xhci_event_cmd event_cmd;
1354 struct xhci_generic_trb generic;
1355};
1356
1357/* TRB bit mask */
1358#define TRB_TYPE_BITMASK (0xfc00)
1359#define TRB_TYPE(p) ((p) << 10)
1360#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
1361/* TRB type IDs */
1362/* bulk, interrupt, isoc scatter/gather, and control data stage */
1363#define TRB_NORMAL 1
1364/* setup stage for control transfers */
1365#define TRB_SETUP 2
1366/* data stage for control transfers */
1367#define TRB_DATA 3
1368/* status stage for control transfers */
1369#define TRB_STATUS 4
1370/* isoc transfers */
1371#define TRB_ISOC 5
1372/* TRB for linking ring segments */
1373#define TRB_LINK 6
1374#define TRB_EVENT_DATA 7
1375/* Transfer Ring No-op (not for the command ring) */
1376#define TRB_TR_NOOP 8
1377/* Command TRBs */
1378/* Enable Slot Command */
1379#define TRB_ENABLE_SLOT 9
1380/* Disable Slot Command */
1381#define TRB_DISABLE_SLOT 10
1382/* Address Device Command */
1383#define TRB_ADDR_DEV 11
1384/* Configure Endpoint Command */
1385#define TRB_CONFIG_EP 12
1386/* Evaluate Context Command */
1387#define TRB_EVAL_CONTEXT 13
1388/* Reset Endpoint Command */
1389#define TRB_RESET_EP 14
1390/* Stop Transfer Ring Command */
1391#define TRB_STOP_RING 15
1392/* Set Transfer Ring Dequeue Pointer Command */
1393#define TRB_SET_DEQ 16
1394/* Reset Device Command */
1395#define TRB_RESET_DEV 17
1396/* Force Event Command (opt) */
1397#define TRB_FORCE_EVENT 18
1398/* Negotiate Bandwidth Command (opt) */
1399#define TRB_NEG_BANDWIDTH 19
1400/* Set Latency Tolerance Value Command (opt) */
1401#define TRB_SET_LT 20
1402/* Get port bandwidth Command */
1403#define TRB_GET_BW 21
1404/* Force Header Command - generate a transaction or link management packet */
1405#define TRB_FORCE_HEADER 22
1406/* No-op Command - not for transfer rings */
1407#define TRB_CMD_NOOP 23
1408/* TRB IDs 24-31 reserved */
1409/* Event TRBS */
1410/* Transfer Event */
1411#define TRB_TRANSFER 32
1412/* Command Completion Event */
1413#define TRB_COMPLETION 33
1414/* Port Status Change Event */
1415#define TRB_PORT_STATUS 34
1416/* Bandwidth Request Event (opt) */
1417#define TRB_BANDWIDTH_EVENT 35
1418/* Doorbell Event (opt) */
1419#define TRB_DOORBELL 36
1420/* Host Controller Event */
1421#define TRB_HC_EVENT 37
1422/* Device Notification Event - device sent function wake notification */
1423#define TRB_DEV_NOTE 38
1424/* MFINDEX Wrap Event - microframe counter wrapped */
1425#define TRB_MFINDEX_WRAP 39
1426/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
1427#define TRB_VENDOR_DEFINED_LOW 48
1428/* Nec vendor-specific command completion event. */
1429#define TRB_NEC_CMD_COMP 48
1430/* Get NEC firmware revision. */
1431#define TRB_NEC_GET_FW 49
1432
1433static inline const char *xhci_trb_type_string(u8 type)
1434{
1435 switch (type) {
1436 case TRB_NORMAL:
1437 return "Normal";
1438 case TRB_SETUP:
1439 return "Setup Stage";
1440 case TRB_DATA:
1441 return "Data Stage";
1442 case TRB_STATUS:
1443 return "Status Stage";
1444 case TRB_ISOC:
1445 return "Isoch";
1446 case TRB_LINK:
1447 return "Link";
1448 case TRB_EVENT_DATA:
1449 return "Event Data";
1450 case TRB_TR_NOOP:
1451 return "No-Op";
1452 case TRB_ENABLE_SLOT:
1453 return "Enable Slot Command";
1454 case TRB_DISABLE_SLOT:
1455 return "Disable Slot Command";
1456 case TRB_ADDR_DEV:
1457 return "Address Device Command";
1458 case TRB_CONFIG_EP:
1459 return "Configure Endpoint Command";
1460 case TRB_EVAL_CONTEXT:
1461 return "Evaluate Context Command";
1462 case TRB_RESET_EP:
1463 return "Reset Endpoint Command";
1464 case TRB_STOP_RING:
1465 return "Stop Ring Command";
1466 case TRB_SET_DEQ:
1467 return "Set TR Dequeue Pointer Command";
1468 case TRB_RESET_DEV:
1469 return "Reset Device Command";
1470 case TRB_FORCE_EVENT:
1471 return "Force Event Command";
1472 case TRB_NEG_BANDWIDTH:
1473 return "Negotiate Bandwidth Command";
1474 case TRB_SET_LT:
1475 return "Set Latency Tolerance Value Command";
1476 case TRB_GET_BW:
1477 return "Get Port Bandwidth Command";
1478 case TRB_FORCE_HEADER:
1479 return "Force Header Command";
1480 case TRB_CMD_NOOP:
1481 return "No-Op Command";
1482 case TRB_TRANSFER:
1483 return "Transfer Event";
1484 case TRB_COMPLETION:
1485 return "Command Completion Event";
1486 case TRB_PORT_STATUS:
1487 return "Port Status Change Event";
1488 case TRB_BANDWIDTH_EVENT:
1489 return "Bandwidth Request Event";
1490 case TRB_DOORBELL:
1491 return "Doorbell Event";
1492 case TRB_HC_EVENT:
1493 return "Host Controller Event";
1494 case TRB_DEV_NOTE:
1495 return "Device Notification Event";
1496 case TRB_MFINDEX_WRAP:
1497 return "MFINDEX Wrap Event";
1498 case TRB_NEC_CMD_COMP:
1499 return "NEC Command Completion Event";
1500 case TRB_NEC_GET_FW:
1501 return "NET Get Firmware Revision Command";
1502 default:
1503 return "UNKNOWN";
1504 }
1505}
1506
1507#define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
1508/* Above, but for __le32 types -- can avoid work by swapping constants: */
1509#define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1510 cpu_to_le32(TRB_TYPE(TRB_LINK)))
1511#define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1512 cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
1513
1514#define NEC_FW_MINOR(p) (((p) >> 0) & 0xff)
1515#define NEC_FW_MAJOR(p) (((p) >> 8) & 0xff)
1516
1517/*
1518 * TRBS_PER_SEGMENT must be a multiple of 4,
1519 * since the command ring is 64-byte aligned.
1520 * It must also be greater than 16.
1521 */
1522#define TRBS_PER_SEGMENT 256
1523/* Allow two commands + a link TRB, along with any reserved command TRBs */
1524#define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3)
1525#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
1526#define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE))
1527/* TRB buffer pointers can't cross 64KB boundaries */
1528#define TRB_MAX_BUFF_SHIFT 16
1529#define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT)
1530/* How much data is left before the 64KB boundary? */
1531#define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_BUFF_SIZE - \
1532 (addr & (TRB_MAX_BUFF_SIZE - 1)))
1533#define MAX_SOFT_RETRY 3
1534/*
1535 * Limits of consecutive isoc trbs that can Block Event Interrupt (BEI) if
1536 * XHCI_AVOID_BEI quirk is in use.
1537 */
1538#define AVOID_BEI_INTERVAL_MIN 8
1539#define AVOID_BEI_INTERVAL_MAX 32
1540
1541struct xhci_segment {
1542 union xhci_trb *trbs;
1543 /* private to HCD */
1544 struct xhci_segment *next;
1545 dma_addr_t dma;
1546 /* Max packet sized bounce buffer for td-fragmant alignment */
1547 dma_addr_t bounce_dma;
1548 void *bounce_buf;
1549 unsigned int bounce_offs;
1550 unsigned int bounce_len;
1551};
1552
1553enum xhci_cancelled_td_status {
1554 TD_DIRTY = 0,
1555 TD_HALTED,
1556 TD_CLEARING_CACHE,
1557 TD_CLEARED,
1558};
1559
1560struct xhci_td {
1561 struct list_head td_list;
1562 struct list_head cancelled_td_list;
1563 int status;
1564 enum xhci_cancelled_td_status cancel_status;
1565 struct urb *urb;
1566 struct xhci_segment *start_seg;
1567 union xhci_trb *first_trb;
1568 union xhci_trb *last_trb;
1569 struct xhci_segment *last_trb_seg;
1570 struct xhci_segment *bounce_seg;
1571 /* actual_length of the URB has already been set */
1572 bool urb_length_set;
1573 unsigned int num_trbs;
1574};
1575
1576/* xHCI command default timeout value */
1577#define XHCI_CMD_DEFAULT_TIMEOUT (5 * HZ)
1578
1579/* command descriptor */
1580struct xhci_cd {
1581 struct xhci_command *command;
1582 union xhci_trb *cmd_trb;
1583};
1584
1585enum xhci_ring_type {
1586 TYPE_CTRL = 0,
1587 TYPE_ISOC,
1588 TYPE_BULK,
1589 TYPE_INTR,
1590 TYPE_STREAM,
1591 TYPE_COMMAND,
1592 TYPE_EVENT,
1593};
1594
1595static inline const char *xhci_ring_type_string(enum xhci_ring_type type)
1596{
1597 switch (type) {
1598 case TYPE_CTRL:
1599 return "CTRL";
1600 case TYPE_ISOC:
1601 return "ISOC";
1602 case TYPE_BULK:
1603 return "BULK";
1604 case TYPE_INTR:
1605 return "INTR";
1606 case TYPE_STREAM:
1607 return "STREAM";
1608 case TYPE_COMMAND:
1609 return "CMD";
1610 case TYPE_EVENT:
1611 return "EVENT";
1612 }
1613
1614 return "UNKNOWN";
1615}
1616
1617struct xhci_ring {
1618 struct xhci_segment *first_seg;
1619 struct xhci_segment *last_seg;
1620 union xhci_trb *enqueue;
1621 struct xhci_segment *enq_seg;
1622 union xhci_trb *dequeue;
1623 struct xhci_segment *deq_seg;
1624 struct list_head td_list;
1625 /*
1626 * Write the cycle state into the TRB cycle field to give ownership of
1627 * the TRB to the host controller (if we are the producer), or to check
1628 * if we own the TRB (if we are the consumer). See section 4.9.1.
1629 */
1630 u32 cycle_state;
1631 unsigned int stream_id;
1632 unsigned int num_segs;
1633 unsigned int num_trbs_free;
1634 unsigned int num_trbs_free_temp;
1635 unsigned int bounce_buf_len;
1636 enum xhci_ring_type type;
1637 bool last_td_was_short;
1638 struct radix_tree_root *trb_address_map;
1639};
1640
1641struct xhci_erst_entry {
1642 /* 64-bit event ring segment address */
1643 __le64 seg_addr;
1644 __le32 seg_size;
1645 /* Set to zero */
1646 __le32 rsvd;
1647};
1648
1649struct xhci_erst {
1650 struct xhci_erst_entry *entries;
1651 unsigned int num_entries;
1652 /* xhci->event_ring keeps track of segment dma addresses */
1653 dma_addr_t erst_dma_addr;
1654 /* Num entries the ERST can contain */
1655 unsigned int erst_size;
1656};
1657
1658struct xhci_scratchpad {
1659 u64 *sp_array;
1660 dma_addr_t sp_dma;
1661 void **sp_buffers;
1662};
1663
1664struct urb_priv {
1665 int num_tds;
1666 int num_tds_done;
1667 struct xhci_td td[];
1668};
1669
1670/*
1671 * Each segment table entry is 4*32bits long. 1K seems like an ok size:
1672 * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
1673 * meaning 64 ring segments.
1674 * Initial allocated size of the ERST, in number of entries */
1675#define ERST_NUM_SEGS 1
1676/* Poll every 60 seconds */
1677#define POLL_TIMEOUT 60
1678/* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
1679#define XHCI_STOP_EP_CMD_TIMEOUT 5
1680/* XXX: Make these module parameters */
1681
1682struct s3_save {
1683 u32 command;
1684 u32 dev_nt;
1685 u64 dcbaa_ptr;
1686 u32 config_reg;
1687 u32 irq_pending;
1688 u32 irq_control;
1689 u32 erst_size;
1690 u64 erst_base;
1691 u64 erst_dequeue;
1692};
1693
1694/* Use for lpm */
1695struct dev_info {
1696 u32 dev_id;
1697 struct list_head list;
1698};
1699
1700struct xhci_bus_state {
1701 unsigned long bus_suspended;
1702 unsigned long next_statechange;
1703
1704 /* Port suspend arrays are indexed by the portnum of the fake roothub */
1705 /* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
1706 u32 port_c_suspend;
1707 u32 suspended_ports;
1708 u32 port_remote_wakeup;
1709 unsigned long resume_done[USB_MAXCHILDREN];
1710 /* which ports have started to resume */
1711 unsigned long resuming_ports;
1712 /* Which ports are waiting on RExit to U0 transition. */
1713 unsigned long rexit_ports;
1714 struct completion rexit_done[USB_MAXCHILDREN];
1715 struct completion u3exit_done[USB_MAXCHILDREN];
1716};
1717
1718
1719/*
1720 * It can take up to 20 ms to transition from RExit to U0 on the
1721 * Intel Lynx Point LP xHCI host.
1722 */
1723#define XHCI_MAX_REXIT_TIMEOUT_MS 20
1724struct xhci_port_cap {
1725 u32 *psi; /* array of protocol speed ID entries */
1726 u8 psi_count;
1727 u8 psi_uid_count;
1728 u8 maj_rev;
1729 u8 min_rev;
1730};
1731
1732struct xhci_port {
1733 __le32 __iomem *addr;
1734 int hw_portnum;
1735 int hcd_portnum;
1736 struct xhci_hub *rhub;
1737 struct xhci_port_cap *port_cap;
1738 unsigned int lpm_incapable:1;
1739};
1740
1741struct xhci_hub {
1742 struct xhci_port **ports;
1743 unsigned int num_ports;
1744 struct usb_hcd *hcd;
1745 /* keep track of bus suspend info */
1746 struct xhci_bus_state bus_state;
1747 /* supported prococol extended capabiliy values */
1748 u8 maj_rev;
1749 u8 min_rev;
1750};
1751
1752/* There is one xhci_hcd structure per controller */
1753struct xhci_hcd {
1754 struct usb_hcd *main_hcd;
1755 struct usb_hcd *shared_hcd;
1756 /* glue to PCI and HCD framework */
1757 struct xhci_cap_regs __iomem *cap_regs;
1758 struct xhci_op_regs __iomem *op_regs;
1759 struct xhci_run_regs __iomem *run_regs;
1760 struct xhci_doorbell_array __iomem *dba;
1761 /* Our HCD's current interrupter register set */
1762 struct xhci_intr_reg __iomem *ir_set;
1763
1764 /* Cached register copies of read-only HC data */
1765 __u32 hcs_params1;
1766 __u32 hcs_params2;
1767 __u32 hcs_params3;
1768 __u32 hcc_params;
1769 __u32 hcc_params2;
1770
1771 spinlock_t lock;
1772
1773 /* packed release number */
1774 u8 sbrn;
1775 u16 hci_version;
1776 u8 max_slots;
1777 u8 max_interrupters;
1778 u8 max_ports;
1779 u8 isoc_threshold;
1780 /* imod_interval in ns (I * 250ns) */
1781 u32 imod_interval;
1782 u32 isoc_bei_interval;
1783 int event_ring_max;
1784 /* 4KB min, 128MB max */
1785 int page_size;
1786 /* Valid values are 12 to 20, inclusive */
1787 int page_shift;
1788 /* msi-x vectors */
1789 int msix_count;
1790 /* optional clocks */
1791 struct clk *clk;
1792 struct clk *reg_clk;
1793 /* optional reset controller */
1794 struct reset_control *reset;
1795 /* data structures */
1796 struct xhci_device_context_array *dcbaa;
1797 struct xhci_ring *cmd_ring;
1798 unsigned int cmd_ring_state;
1799#define CMD_RING_STATE_RUNNING (1 << 0)
1800#define CMD_RING_STATE_ABORTED (1 << 1)
1801#define CMD_RING_STATE_STOPPED (1 << 2)
1802 struct list_head cmd_list;
1803 unsigned int cmd_ring_reserved_trbs;
1804 struct delayed_work cmd_timer;
1805 struct completion cmd_ring_stop_completion;
1806 struct xhci_command *current_cmd;
1807 struct xhci_ring *event_ring;
1808 struct xhci_erst erst;
1809 /* Scratchpad */
1810 struct xhci_scratchpad *scratchpad;
1811
1812 /* slot enabling and address device helpers */
1813 /* these are not thread safe so use mutex */
1814 struct mutex mutex;
1815 /* Internal mirror of the HW's dcbaa */
1816 struct xhci_virt_device *devs[MAX_HC_SLOTS];
1817 /* For keeping track of bandwidth domains per roothub. */
1818 struct xhci_root_port_bw_info *rh_bw;
1819
1820 /* DMA pools */
1821 struct dma_pool *device_pool;
1822 struct dma_pool *segment_pool;
1823 struct dma_pool *small_streams_pool;
1824 struct dma_pool *medium_streams_pool;
1825
1826 /* Host controller watchdog timer structures */
1827 unsigned int xhc_state;
1828 unsigned long run_graceperiod;
1829 struct s3_save s3;
1830/* Host controller is dying - not responding to commands. "I'm not dead yet!"
1831 *
1832 * xHC interrupts have been disabled and a watchdog timer will (or has already)
1833 * halt the xHCI host, and complete all URBs with an -ESHUTDOWN code. Any code
1834 * that sees this status (other than the timer that set it) should stop touching
1835 * hardware immediately. Interrupt handlers should return immediately when
1836 * they see this status (any time they drop and re-acquire xhci->lock).
1837 * xhci_urb_dequeue() should call usb_hcd_check_unlink_urb() and return without
1838 * putting the TD on the canceled list, etc.
1839 *
1840 * There are no reports of xHCI host controllers that display this issue.
1841 */
1842#define XHCI_STATE_DYING (1 << 0)
1843#define XHCI_STATE_HALTED (1 << 1)
1844#define XHCI_STATE_REMOVING (1 << 2)
1845 unsigned long long quirks;
1846#define XHCI_LINK_TRB_QUIRK BIT_ULL(0)
1847#define XHCI_RESET_EP_QUIRK BIT_ULL(1) /* Deprecated */
1848#define XHCI_NEC_HOST BIT_ULL(2)
1849#define XHCI_AMD_PLL_FIX BIT_ULL(3)
1850#define XHCI_SPURIOUS_SUCCESS BIT_ULL(4)
1851/*
1852 * Certain Intel host controllers have a limit to the number of endpoint
1853 * contexts they can handle. Ideally, they would signal that they can't handle
1854 * anymore endpoint contexts by returning a Resource Error for the Configure
1855 * Endpoint command, but they don't. Instead they expect software to keep track
1856 * of the number of active endpoints for them, across configure endpoint
1857 * commands, reset device commands, disable slot commands, and address device
1858 * commands.
1859 */
1860#define XHCI_EP_LIMIT_QUIRK BIT_ULL(5)
1861#define XHCI_BROKEN_MSI BIT_ULL(6)
1862#define XHCI_RESET_ON_RESUME BIT_ULL(7)
1863#define XHCI_SW_BW_CHECKING BIT_ULL(8)
1864#define XHCI_AMD_0x96_HOST BIT_ULL(9)
1865#define XHCI_TRUST_TX_LENGTH BIT_ULL(10)
1866#define XHCI_LPM_SUPPORT BIT_ULL(11)
1867#define XHCI_INTEL_HOST BIT_ULL(12)
1868#define XHCI_SPURIOUS_REBOOT BIT_ULL(13)
1869#define XHCI_COMP_MODE_QUIRK BIT_ULL(14)
1870#define XHCI_AVOID_BEI BIT_ULL(15)
1871#define XHCI_PLAT BIT_ULL(16)
1872#define XHCI_SLOW_SUSPEND BIT_ULL(17)
1873#define XHCI_SPURIOUS_WAKEUP BIT_ULL(18)
1874/* For controllers with a broken beyond repair streams implementation */
1875#define XHCI_BROKEN_STREAMS BIT_ULL(19)
1876#define XHCI_PME_STUCK_QUIRK BIT_ULL(20)
1877#define XHCI_MTK_HOST BIT_ULL(21)
1878#define XHCI_SSIC_PORT_UNUSED BIT_ULL(22)
1879#define XHCI_NO_64BIT_SUPPORT BIT_ULL(23)
1880#define XHCI_MISSING_CAS BIT_ULL(24)
1881/* For controller with a broken Port Disable implementation */
1882#define XHCI_BROKEN_PORT_PED BIT_ULL(25)
1883#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 BIT_ULL(26)
1884#define XHCI_U2_DISABLE_WAKE BIT_ULL(27)
1885#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL BIT_ULL(28)
1886#define XHCI_HW_LPM_DISABLE BIT_ULL(29)
1887#define XHCI_SUSPEND_DELAY BIT_ULL(30)
1888#define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31)
1889#define XHCI_ZERO_64B_REGS BIT_ULL(32)
1890#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
1891#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
1892#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
1893#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)
1894#define XHCI_SKIP_PHY_INIT BIT_ULL(37)
1895#define XHCI_DISABLE_SPARSE BIT_ULL(38)
1896#define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39)
1897#define XHCI_NO_SOFT_RETRY BIT_ULL(40)
1898#define XHCI_BROKEN_D3COLD BIT_ULL(41)
1899#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
1900#define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43)
1901#define XHCI_RESET_TO_DEFAULT BIT_ULL(44)
1902
1903 unsigned int num_active_eps;
1904 unsigned int limit_active_eps;
1905 struct xhci_port *hw_ports;
1906 struct xhci_hub usb2_rhub;
1907 struct xhci_hub usb3_rhub;
1908 /* support xHCI 1.0 spec USB2 hardware LPM */
1909 unsigned hw_lpm_support:1;
1910 /* Broken Suspend flag for SNPS Suspend resume issue */
1911 unsigned broken_suspend:1;
1912 /* Indicates that omitting hcd is supported if root hub has no ports */
1913 unsigned allow_single_roothub:1;
1914 /* cached usb2 extened protocol capabilites */
1915 u32 *ext_caps;
1916 unsigned int num_ext_caps;
1917 /* cached extended protocol port capabilities */
1918 struct xhci_port_cap *port_caps;
1919 unsigned int num_port_caps;
1920 /* Compliance Mode Recovery Data */
1921 struct timer_list comp_mode_recovery_timer;
1922 u32 port_status_u0;
1923 u16 test_mode;
1924/* Compliance Mode Timer Triggered every 2 seconds */
1925#define COMP_MODE_RCVRY_MSECS 2000
1926
1927 struct dentry *debugfs_root;
1928 struct dentry *debugfs_slots;
1929 struct list_head regset_list;
1930
1931 void *dbc;
1932 /* platform-specific data -- must come last */
1933 unsigned long priv[] __aligned(sizeof(s64));
1934};
1935
1936/* Platform specific overrides to generic XHCI hc_driver ops */
1937struct xhci_driver_overrides {
1938 size_t extra_priv_size;
1939 int (*reset)(struct usb_hcd *hcd);
1940 int (*start)(struct usb_hcd *hcd);
1941 int (*add_endpoint)(struct usb_hcd *hcd, struct usb_device *udev,
1942 struct usb_host_endpoint *ep);
1943 int (*drop_endpoint)(struct usb_hcd *hcd, struct usb_device *udev,
1944 struct usb_host_endpoint *ep);
1945 int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
1946 void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
1947 int (*update_hub_device)(struct usb_hcd *hcd, struct usb_device *hdev,
1948 struct usb_tt *tt, gfp_t mem_flags);
1949};
1950
1951#define XHCI_CFC_DELAY 10
1952
1953/* convert between an HCD pointer and the corresponding EHCI_HCD */
1954static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
1955{
1956 struct usb_hcd *primary_hcd;
1957
1958 if (usb_hcd_is_primary_hcd(hcd))
1959 primary_hcd = hcd;
1960 else
1961 primary_hcd = hcd->primary_hcd;
1962
1963 return (struct xhci_hcd *) (primary_hcd->hcd_priv);
1964}
1965
1966static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
1967{
1968 return xhci->main_hcd;
1969}
1970
1971static inline struct usb_hcd *xhci_get_usb3_hcd(struct xhci_hcd *xhci)
1972{
1973 if (xhci->shared_hcd)
1974 return xhci->shared_hcd;
1975
1976 if (!xhci->usb2_rhub.num_ports)
1977 return xhci->main_hcd;
1978
1979 return NULL;
1980}
1981
1982static inline bool xhci_hcd_is_usb3(struct usb_hcd *hcd)
1983{
1984 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
1985
1986 return hcd == xhci_get_usb3_hcd(xhci);
1987}
1988
1989static inline bool xhci_has_one_roothub(struct xhci_hcd *xhci)
1990{
1991 return xhci->allow_single_roothub &&
1992 (!xhci->usb2_rhub.num_ports || !xhci->usb3_rhub.num_ports);
1993}
1994
1995#define xhci_dbg(xhci, fmt, args...) \
1996 dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1997#define xhci_err(xhci, fmt, args...) \
1998 dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1999#define xhci_warn(xhci, fmt, args...) \
2000 dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
2001#define xhci_warn_ratelimited(xhci, fmt, args...) \
2002 dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
2003#define xhci_info(xhci, fmt, args...) \
2004 dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
2005
2006/*
2007 * Registers should always be accessed with double word or quad word accesses.
2008 *
2009 * Some xHCI implementations may support 64-bit address pointers. Registers
2010 * with 64-bit address pointers should be written to with dword accesses by
2011 * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
2012 * xHCI implementations that do not support 64-bit address pointers will ignore
2013 * the high dword, and write order is irrelevant.
2014 */
2015static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
2016 __le64 __iomem *regs)
2017{
2018 return lo_hi_readq(regs);
2019}
2020static inline void xhci_write_64(struct xhci_hcd *xhci,
2021 const u64 val, __le64 __iomem *regs)
2022{
2023 lo_hi_writeq(val, regs);
2024}
2025
2026static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
2027{
2028 return xhci->quirks & XHCI_LINK_TRB_QUIRK;
2029}
2030
2031/* xHCI debugging */
2032char *xhci_get_slot_state(struct xhci_hcd *xhci,
2033 struct xhci_container_ctx *ctx);
2034void xhci_dbg_trace(struct xhci_hcd *xhci, void (*trace)(struct va_format *),
2035 const char *fmt, ...);
2036
2037/* xHCI memory management */
2038void xhci_mem_cleanup(struct xhci_hcd *xhci);
2039int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
2040void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
2041int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
2042int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
2043void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
2044 struct usb_device *udev);
2045unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
2046unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
2047void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
2048void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
2049 struct xhci_virt_device *virt_dev,
2050 int old_active_eps);
2051void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info);
2052void xhci_update_bw_info(struct xhci_hcd *xhci,
2053 struct xhci_container_ctx *in_ctx,
2054 struct xhci_input_control_ctx *ctrl_ctx,
2055 struct xhci_virt_device *virt_dev);
2056void xhci_endpoint_copy(struct xhci_hcd *xhci,
2057 struct xhci_container_ctx *in_ctx,
2058 struct xhci_container_ctx *out_ctx,
2059 unsigned int ep_index);
2060void xhci_slot_copy(struct xhci_hcd *xhci,
2061 struct xhci_container_ctx *in_ctx,
2062 struct xhci_container_ctx *out_ctx);
2063int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
2064 struct usb_device *udev, struct usb_host_endpoint *ep,
2065 gfp_t mem_flags);
2066struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
2067 unsigned int num_segs, unsigned int cycle_state,
2068 enum xhci_ring_type type, unsigned int max_packet, gfp_t flags);
2069void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
2070int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
2071 unsigned int num_trbs, gfp_t flags);
2072int xhci_alloc_erst(struct xhci_hcd *xhci,
2073 struct xhci_ring *evt_ring,
2074 struct xhci_erst *erst,
2075 gfp_t flags);
2076void xhci_initialize_ring_info(struct xhci_ring *ring,
2077 unsigned int cycle_state);
2078void xhci_free_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
2079void xhci_free_endpoint_ring(struct xhci_hcd *xhci,
2080 struct xhci_virt_device *virt_dev,
2081 unsigned int ep_index);
2082struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
2083 unsigned int num_stream_ctxs,
2084 unsigned int num_streams,
2085 unsigned int max_packet, gfp_t flags);
2086void xhci_free_stream_info(struct xhci_hcd *xhci,
2087 struct xhci_stream_info *stream_info);
2088void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
2089 struct xhci_ep_ctx *ep_ctx,
2090 struct xhci_stream_info *stream_info);
2091void xhci_setup_no_streams_ep_input_ctx(struct xhci_ep_ctx *ep_ctx,
2092 struct xhci_virt_ep *ep);
2093void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
2094 struct xhci_virt_device *virt_dev, bool drop_control_ep);
2095struct xhci_ring *xhci_dma_to_transfer_ring(
2096 struct xhci_virt_ep *ep,
2097 u64 address);
2098struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
2099 bool allocate_completion, gfp_t mem_flags);
2100struct xhci_command *xhci_alloc_command_with_ctx(struct xhci_hcd *xhci,
2101 bool allocate_completion, gfp_t mem_flags);
2102void xhci_urb_free_priv(struct urb_priv *urb_priv);
2103void xhci_free_command(struct xhci_hcd *xhci,
2104 struct xhci_command *command);
2105struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
2106 int type, gfp_t flags);
2107void xhci_free_container_ctx(struct xhci_hcd *xhci,
2108 struct xhci_container_ctx *ctx);
2109
2110/* xHCI host controller glue */
2111typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
2112int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us);
2113void xhci_quiesce(struct xhci_hcd *xhci);
2114int xhci_halt(struct xhci_hcd *xhci);
2115int xhci_start(struct xhci_hcd *xhci);
2116int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us);
2117int xhci_run(struct usb_hcd *hcd);
2118int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
2119void xhci_shutdown(struct usb_hcd *hcd);
2120void xhci_init_driver(struct hc_driver *drv,
2121 const struct xhci_driver_overrides *over);
2122int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
2123 struct usb_host_endpoint *ep);
2124int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
2125 struct usb_host_endpoint *ep);
2126int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
2127void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
2128int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
2129 struct usb_tt *tt, gfp_t mem_flags);
2130int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id);
2131int xhci_ext_cap_init(struct xhci_hcd *xhci);
2132
2133int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup);
2134int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
2135
2136irqreturn_t xhci_irq(struct usb_hcd *hcd);
2137irqreturn_t xhci_msi_irq(int irq, void *hcd);
2138int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
2139int xhci_alloc_tt_info(struct xhci_hcd *xhci,
2140 struct xhci_virt_device *virt_dev,
2141 struct usb_device *hdev,
2142 struct usb_tt *tt, gfp_t mem_flags);
2143
2144/* xHCI ring, segment, TRB, and TD functions */
2145dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
2146struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
2147 struct xhci_segment *start_seg, union xhci_trb *start_trb,
2148 union xhci_trb *end_trb, dma_addr_t suspect_dma, bool debug);
2149int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
2150void xhci_ring_cmd_db(struct xhci_hcd *xhci);
2151int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd,
2152 u32 trb_type, u32 slot_id);
2153int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
2154 dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev);
2155int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
2156 u32 field1, u32 field2, u32 field3, u32 field4);
2157int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd,
2158 int slot_id, unsigned int ep_index, int suspend);
2159int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
2160 int slot_id, unsigned int ep_index);
2161int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
2162 int slot_id, unsigned int ep_index);
2163int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
2164 int slot_id, unsigned int ep_index);
2165int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
2166 struct urb *urb, int slot_id, unsigned int ep_index);
2167int xhci_queue_configure_endpoint(struct xhci_hcd *xhci,
2168 struct xhci_command *cmd, dma_addr_t in_ctx_ptr, u32 slot_id,
2169 bool command_must_succeed);
2170int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd,
2171 dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed);
2172int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd,
2173 int slot_id, unsigned int ep_index,
2174 enum xhci_ep_reset_type reset_type);
2175int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
2176 u32 slot_id);
2177void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
2178 unsigned int ep_index, unsigned int stream_id,
2179 struct xhci_td *td);
2180void xhci_stop_endpoint_command_watchdog(struct timer_list *t);
2181void xhci_handle_command_timeout(struct work_struct *work);
2182
2183void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
2184 unsigned int ep_index, unsigned int stream_id);
2185void xhci_ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
2186 unsigned int slot_id,
2187 unsigned int ep_index);
2188void xhci_cleanup_command_queue(struct xhci_hcd *xhci);
2189void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring);
2190unsigned int count_trbs(u64 addr, u64 len);
2191
2192/* xHCI roothub code */
2193void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
2194 u32 link_state);
2195void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port,
2196 u32 port_bit);
2197int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
2198 char *buf, u16 wLength);
2199int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
2200int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
2201struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
2202
2203void xhci_hc_died(struct xhci_hcd *xhci);
2204
2205#ifdef CONFIG_PM
2206int xhci_bus_suspend(struct usb_hcd *hcd);
2207int xhci_bus_resume(struct usb_hcd *hcd);
2208unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd);
2209#else
2210#define xhci_bus_suspend NULL
2211#define xhci_bus_resume NULL
2212#define xhci_get_resuming_ports NULL
2213#endif /* CONFIG_PM */
2214
2215u32 xhci_port_state_to_neutral(u32 state);
2216int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
2217 u16 port);
2218void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
2219
2220/* xHCI contexts */
2221struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx);
2222struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
2223struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
2224
2225struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
2226 unsigned int slot_id, unsigned int ep_index,
2227 unsigned int stream_id);
2228
2229static inline struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
2230 struct urb *urb)
2231{
2232 return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
2233 xhci_get_endpoint_index(&urb->ep->desc),
2234 urb->stream_id);
2235}
2236
2237/*
2238 * TODO: As per spec Isochronous IDT transmissions are supported. We bypass
2239 * them anyways as we where unable to find a device that matches the
2240 * constraints.
2241 */
2242static inline bool xhci_urb_suitable_for_idt(struct urb *urb)
2243{
2244 if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) &&
2245 usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE &&
2246 urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE &&
2247 !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) &&
2248 !urb->num_sgs)
2249 return true;
2250
2251 return false;
2252}
2253
2254static inline char *xhci_slot_state_string(u32 state)
2255{
2256 switch (state) {
2257 case SLOT_STATE_ENABLED:
2258 return "enabled/disabled";
2259 case SLOT_STATE_DEFAULT:
2260 return "default";
2261 case SLOT_STATE_ADDRESSED:
2262 return "addressed";
2263 case SLOT_STATE_CONFIGURED:
2264 return "configured";
2265 default:
2266 return "reserved";
2267 }
2268}
2269
2270static inline const char *xhci_decode_trb(char *str, size_t size,
2271 u32 field0, u32 field1, u32 field2, u32 field3)
2272{
2273 int type = TRB_FIELD_TO_TYPE(field3);
2274
2275 switch (type) {
2276 case TRB_LINK:
2277 snprintf(str, size,
2278 "LINK %08x%08x intr %d type '%s' flags %c:%c:%c:%c",
2279 field1, field0, GET_INTR_TARGET(field2),
2280 xhci_trb_type_string(type),
2281 field3 & TRB_IOC ? 'I' : 'i',
2282 field3 & TRB_CHAIN ? 'C' : 'c',
2283 field3 & TRB_TC ? 'T' : 't',
2284 field3 & TRB_CYCLE ? 'C' : 'c');
2285 break;
2286 case TRB_TRANSFER:
2287 case TRB_COMPLETION:
2288 case TRB_PORT_STATUS:
2289 case TRB_BANDWIDTH_EVENT:
2290 case TRB_DOORBELL:
2291 case TRB_HC_EVENT:
2292 case TRB_DEV_NOTE:
2293 case TRB_MFINDEX_WRAP:
2294 snprintf(str, size,
2295 "TRB %08x%08x status '%s' len %d slot %d ep %d type '%s' flags %c:%c",
2296 field1, field0,
2297 xhci_trb_comp_code_string(GET_COMP_CODE(field2)),
2298 EVENT_TRB_LEN(field2), TRB_TO_SLOT_ID(field3),
2299 /* Macro decrements 1, maybe it shouldn't?!? */
2300 TRB_TO_EP_INDEX(field3) + 1,
2301 xhci_trb_type_string(type),
2302 field3 & EVENT_DATA ? 'E' : 'e',
2303 field3 & TRB_CYCLE ? 'C' : 'c');
2304
2305 break;
2306 case TRB_SETUP:
2307 snprintf(str, size,
2308 "bRequestType %02x bRequest %02x wValue %02x%02x wIndex %02x%02x wLength %d length %d TD size %d intr %d type '%s' flags %c:%c:%c",
2309 field0 & 0xff,
2310 (field0 & 0xff00) >> 8,
2311 (field0 & 0xff000000) >> 24,
2312 (field0 & 0xff0000) >> 16,
2313 (field1 & 0xff00) >> 8,
2314 field1 & 0xff,
2315 (field1 & 0xff000000) >> 16 |
2316 (field1 & 0xff0000) >> 16,
2317 TRB_LEN(field2), GET_TD_SIZE(field2),
2318 GET_INTR_TARGET(field2),
2319 xhci_trb_type_string(type),
2320 field3 & TRB_IDT ? 'I' : 'i',
2321 field3 & TRB_IOC ? 'I' : 'i',
2322 field3 & TRB_CYCLE ? 'C' : 'c');
2323 break;
2324 case TRB_DATA:
2325 snprintf(str, size,
2326 "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c",
2327 field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
2328 GET_INTR_TARGET(field2),
2329 xhci_trb_type_string(type),
2330 field3 & TRB_IDT ? 'I' : 'i',
2331 field3 & TRB_IOC ? 'I' : 'i',
2332 field3 & TRB_CHAIN ? 'C' : 'c',
2333 field3 & TRB_NO_SNOOP ? 'S' : 's',
2334 field3 & TRB_ISP ? 'I' : 'i',
2335 field3 & TRB_ENT ? 'E' : 'e',
2336 field3 & TRB_CYCLE ? 'C' : 'c');
2337 break;
2338 case TRB_STATUS:
2339 snprintf(str, size,
2340 "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c",
2341 field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
2342 GET_INTR_TARGET(field2),
2343 xhci_trb_type_string(type),
2344 field3 & TRB_IOC ? 'I' : 'i',
2345 field3 & TRB_CHAIN ? 'C' : 'c',
2346 field3 & TRB_ENT ? 'E' : 'e',
2347 field3 & TRB_CYCLE ? 'C' : 'c');
2348 break;
2349 case TRB_NORMAL:
2350 case TRB_ISOC:
2351 case TRB_EVENT_DATA:
2352 case TRB_TR_NOOP:
2353 snprintf(str, size,
2354 "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c:%c",
2355 field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
2356 GET_INTR_TARGET(field2),
2357 xhci_trb_type_string(type),
2358 field3 & TRB_BEI ? 'B' : 'b',
2359 field3 & TRB_IDT ? 'I' : 'i',
2360 field3 & TRB_IOC ? 'I' : 'i',
2361 field3 & TRB_CHAIN ? 'C' : 'c',
2362 field3 & TRB_NO_SNOOP ? 'S' : 's',
2363 field3 & TRB_ISP ? 'I' : 'i',
2364 field3 & TRB_ENT ? 'E' : 'e',
2365 field3 & TRB_CYCLE ? 'C' : 'c');
2366 break;
2367
2368 case TRB_CMD_NOOP:
2369 case TRB_ENABLE_SLOT:
2370 snprintf(str, size,
2371 "%s: flags %c",
2372 xhci_trb_type_string(type),
2373 field3 & TRB_CYCLE ? 'C' : 'c');
2374 break;
2375 case TRB_DISABLE_SLOT:
2376 case TRB_NEG_BANDWIDTH:
2377 snprintf(str, size,
2378 "%s: slot %d flags %c",
2379 xhci_trb_type_string(type),
2380 TRB_TO_SLOT_ID(field3),
2381 field3 & TRB_CYCLE ? 'C' : 'c');
2382 break;
2383 case TRB_ADDR_DEV:
2384 snprintf(str, size,
2385 "%s: ctx %08x%08x slot %d flags %c:%c",
2386 xhci_trb_type_string(type),
2387 field1, field0,
2388 TRB_TO_SLOT_ID(field3),
2389 field3 & TRB_BSR ? 'B' : 'b',
2390 field3 & TRB_CYCLE ? 'C' : 'c');
2391 break;
2392 case TRB_CONFIG_EP:
2393 snprintf(str, size,
2394 "%s: ctx %08x%08x slot %d flags %c:%c",
2395 xhci_trb_type_string(type),
2396 field1, field0,
2397 TRB_TO_SLOT_ID(field3),
2398 field3 & TRB_DC ? 'D' : 'd',
2399 field3 & TRB_CYCLE ? 'C' : 'c');
2400 break;
2401 case TRB_EVAL_CONTEXT:
2402 snprintf(str, size,
2403 "%s: ctx %08x%08x slot %d flags %c",
2404 xhci_trb_type_string(type),
2405 field1, field0,
2406 TRB_TO_SLOT_ID(field3),
2407 field3 & TRB_CYCLE ? 'C' : 'c');
2408 break;
2409 case TRB_RESET_EP:
2410 snprintf(str, size,
2411 "%s: ctx %08x%08x slot %d ep %d flags %c:%c",
2412 xhci_trb_type_string(type),
2413 field1, field0,
2414 TRB_TO_SLOT_ID(field3),
2415 /* Macro decrements 1, maybe it shouldn't?!? */
2416 TRB_TO_EP_INDEX(field3) + 1,
2417 field3 & TRB_TSP ? 'T' : 't',
2418 field3 & TRB_CYCLE ? 'C' : 'c');
2419 break;
2420 case TRB_STOP_RING:
2421 snprintf(str, size,
2422 "%s: slot %d sp %d ep %d flags %c",
2423 xhci_trb_type_string(type),
2424 TRB_TO_SLOT_ID(field3),
2425 TRB_TO_SUSPEND_PORT(field3),
2426 /* Macro decrements 1, maybe it shouldn't?!? */
2427 TRB_TO_EP_INDEX(field3) + 1,
2428 field3 & TRB_CYCLE ? 'C' : 'c');
2429 break;
2430 case TRB_SET_DEQ:
2431 snprintf(str, size,
2432 "%s: deq %08x%08x stream %d slot %d ep %d flags %c",
2433 xhci_trb_type_string(type),
2434 field1, field0,
2435 TRB_TO_STREAM_ID(field2),
2436 TRB_TO_SLOT_ID(field3),
2437 /* Macro decrements 1, maybe it shouldn't?!? */
2438 TRB_TO_EP_INDEX(field3) + 1,
2439 field3 & TRB_CYCLE ? 'C' : 'c');
2440 break;
2441 case TRB_RESET_DEV:
2442 snprintf(str, size,
2443 "%s: slot %d flags %c",
2444 xhci_trb_type_string(type),
2445 TRB_TO_SLOT_ID(field3),
2446 field3 & TRB_CYCLE ? 'C' : 'c');
2447 break;
2448 case TRB_FORCE_EVENT:
2449 snprintf(str, size,
2450 "%s: event %08x%08x vf intr %d vf id %d flags %c",
2451 xhci_trb_type_string(type),
2452 field1, field0,
2453 TRB_TO_VF_INTR_TARGET(field2),
2454 TRB_TO_VF_ID(field3),
2455 field3 & TRB_CYCLE ? 'C' : 'c');
2456 break;
2457 case TRB_SET_LT:
2458 snprintf(str, size,
2459 "%s: belt %d flags %c",
2460 xhci_trb_type_string(type),
2461 TRB_TO_BELT(field3),
2462 field3 & TRB_CYCLE ? 'C' : 'c');
2463 break;
2464 case TRB_GET_BW:
2465 snprintf(str, size,
2466 "%s: ctx %08x%08x slot %d speed %d flags %c",
2467 xhci_trb_type_string(type),
2468 field1, field0,
2469 TRB_TO_SLOT_ID(field3),
2470 TRB_TO_DEV_SPEED(field3),
2471 field3 & TRB_CYCLE ? 'C' : 'c');
2472 break;
2473 case TRB_FORCE_HEADER:
2474 snprintf(str, size,
2475 "%s: info %08x%08x%08x pkt type %d roothub port %d flags %c",
2476 xhci_trb_type_string(type),
2477 field2, field1, field0 & 0xffffffe0,
2478 TRB_TO_PACKET_TYPE(field0),
2479 TRB_TO_ROOTHUB_PORT(field3),
2480 field3 & TRB_CYCLE ? 'C' : 'c');
2481 break;
2482 default:
2483 snprintf(str, size,
2484 "type '%s' -> raw %08x %08x %08x %08x",
2485 xhci_trb_type_string(type),
2486 field0, field1, field2, field3);
2487 }
2488
2489 return str;
2490}
2491
2492static inline const char *xhci_decode_ctrl_ctx(char *str,
2493 unsigned long drop, unsigned long add)
2494{
2495 unsigned int bit;
2496 int ret = 0;
2497
2498 str[0] = '\0';
2499
2500 if (drop) {
2501 ret = sprintf(str, "Drop:");
2502 for_each_set_bit(bit, &drop, 32)
2503 ret += sprintf(str + ret, " %d%s",
2504 bit / 2,
2505 bit % 2 ? "in":"out");
2506 ret += sprintf(str + ret, ", ");
2507 }
2508
2509 if (add) {
2510 ret += sprintf(str + ret, "Add:%s%s",
2511 (add & SLOT_FLAG) ? " slot":"",
2512 (add & EP0_FLAG) ? " ep0":"");
2513 add &= ~(SLOT_FLAG | EP0_FLAG);
2514 for_each_set_bit(bit, &add, 32)
2515 ret += sprintf(str + ret, " %d%s",
2516 bit / 2,
2517 bit % 2 ? "in":"out");
2518 }
2519 return str;
2520}
2521
2522static inline const char *xhci_decode_slot_context(char *str,
2523 u32 info, u32 info2, u32 tt_info, u32 state)
2524{
2525 u32 speed;
2526 u32 hub;
2527 u32 mtt;
2528 int ret = 0;
2529
2530 speed = info & DEV_SPEED;
2531 hub = info & DEV_HUB;
2532 mtt = info & DEV_MTT;
2533
2534 ret = sprintf(str, "RS %05x %s%s%s Ctx Entries %d MEL %d us Port# %d/%d",
2535 info & ROUTE_STRING_MASK,
2536 ({ char *s;
2537 switch (speed) {
2538 case SLOT_SPEED_FS:
2539 s = "full-speed";
2540 break;
2541 case SLOT_SPEED_LS:
2542 s = "low-speed";
2543 break;
2544 case SLOT_SPEED_HS:
2545 s = "high-speed";
2546 break;
2547 case SLOT_SPEED_SS:
2548 s = "super-speed";
2549 break;
2550 case SLOT_SPEED_SSP:
2551 s = "super-speed plus";
2552 break;
2553 default:
2554 s = "UNKNOWN speed";
2555 } s; }),
2556 mtt ? " multi-TT" : "",
2557 hub ? " Hub" : "",
2558 (info & LAST_CTX_MASK) >> 27,
2559 info2 & MAX_EXIT,
2560 DEVINFO_TO_ROOT_HUB_PORT(info2),
2561 DEVINFO_TO_MAX_PORTS(info2));
2562
2563 ret += sprintf(str + ret, " [TT Slot %d Port# %d TTT %d Intr %d] Addr %d State %s",
2564 tt_info & TT_SLOT, (tt_info & TT_PORT) >> 8,
2565 GET_TT_THINK_TIME(tt_info), GET_INTR_TARGET(tt_info),
2566 state & DEV_ADDR_MASK,
2567 xhci_slot_state_string(GET_SLOT_STATE(state)));
2568
2569 return str;
2570}
2571
2572
2573static inline const char *xhci_portsc_link_state_string(u32 portsc)
2574{
2575 switch (portsc & PORT_PLS_MASK) {
2576 case XDEV_U0:
2577 return "U0";
2578 case XDEV_U1:
2579 return "U1";
2580 case XDEV_U2:
2581 return "U2";
2582 case XDEV_U3:
2583 return "U3";
2584 case XDEV_DISABLED:
2585 return "Disabled";
2586 case XDEV_RXDETECT:
2587 return "RxDetect";
2588 case XDEV_INACTIVE:
2589 return "Inactive";
2590 case XDEV_POLLING:
2591 return "Polling";
2592 case XDEV_RECOVERY:
2593 return "Recovery";
2594 case XDEV_HOT_RESET:
2595 return "Hot Reset";
2596 case XDEV_COMP_MODE:
2597 return "Compliance mode";
2598 case XDEV_TEST_MODE:
2599 return "Test mode";
2600 case XDEV_RESUME:
2601 return "Resume";
2602 default:
2603 break;
2604 }
2605 return "Unknown";
2606}
2607
2608static inline const char *xhci_decode_portsc(char *str, u32 portsc)
2609{
2610 int ret;
2611
2612 ret = sprintf(str, "%s %s %s Link:%s PortSpeed:%d ",
2613 portsc & PORT_POWER ? "Powered" : "Powered-off",
2614 portsc & PORT_CONNECT ? "Connected" : "Not-connected",
2615 portsc & PORT_PE ? "Enabled" : "Disabled",
2616 xhci_portsc_link_state_string(portsc),
2617 DEV_PORT_SPEED(portsc));
2618
2619 if (portsc & PORT_OC)
2620 ret += sprintf(str + ret, "OverCurrent ");
2621 if (portsc & PORT_RESET)
2622 ret += sprintf(str + ret, "In-Reset ");
2623
2624 ret += sprintf(str + ret, "Change: ");
2625 if (portsc & PORT_CSC)
2626 ret += sprintf(str + ret, "CSC ");
2627 if (portsc & PORT_PEC)
2628 ret += sprintf(str + ret, "PEC ");
2629 if (portsc & PORT_WRC)
2630 ret += sprintf(str + ret, "WRC ");
2631 if (portsc & PORT_OCC)
2632 ret += sprintf(str + ret, "OCC ");
2633 if (portsc & PORT_RC)
2634 ret += sprintf(str + ret, "PRC ");
2635 if (portsc & PORT_PLC)
2636 ret += sprintf(str + ret, "PLC ");
2637 if (portsc & PORT_CEC)
2638 ret += sprintf(str + ret, "CEC ");
2639 if (portsc & PORT_CAS)
2640 ret += sprintf(str + ret, "CAS ");
2641
2642 ret += sprintf(str + ret, "Wake: ");
2643 if (portsc & PORT_WKCONN_E)
2644 ret += sprintf(str + ret, "WCE ");
2645 if (portsc & PORT_WKDISC_E)
2646 ret += sprintf(str + ret, "WDE ");
2647 if (portsc & PORT_WKOC_E)
2648 ret += sprintf(str + ret, "WOE ");
2649
2650 return str;
2651}
2652
2653static inline const char *xhci_decode_usbsts(char *str, u32 usbsts)
2654{
2655 int ret = 0;
2656
2657 ret = sprintf(str, " 0x%08x", usbsts);
2658
2659 if (usbsts == ~(u32)0)
2660 return str;
2661
2662 if (usbsts & STS_HALT)
2663 ret += sprintf(str + ret, " HCHalted");
2664 if (usbsts & STS_FATAL)
2665 ret += sprintf(str + ret, " HSE");
2666 if (usbsts & STS_EINT)
2667 ret += sprintf(str + ret, " EINT");
2668 if (usbsts & STS_PORT)
2669 ret += sprintf(str + ret, " PCD");
2670 if (usbsts & STS_SAVE)
2671 ret += sprintf(str + ret, " SSS");
2672 if (usbsts & STS_RESTORE)
2673 ret += sprintf(str + ret, " RSS");
2674 if (usbsts & STS_SRE)
2675 ret += sprintf(str + ret, " SRE");
2676 if (usbsts & STS_CNR)
2677 ret += sprintf(str + ret, " CNR");
2678 if (usbsts & STS_HCE)
2679 ret += sprintf(str + ret, " HCE");
2680
2681 return str;
2682}
2683
2684static inline const char *xhci_decode_doorbell(char *str, u32 slot, u32 doorbell)
2685{
2686 u8 ep;
2687 u16 stream;
2688 int ret;
2689
2690 ep = (doorbell & 0xff);
2691 stream = doorbell >> 16;
2692
2693 if (slot == 0) {
2694 sprintf(str, "Command Ring %d", doorbell);
2695 return str;
2696 }
2697 ret = sprintf(str, "Slot %d ", slot);
2698 if (ep > 0 && ep < 32)
2699 ret = sprintf(str + ret, "ep%d%s",
2700 ep / 2,
2701 ep % 2 ? "in" : "out");
2702 else if (ep == 0 || ep < 248)
2703 ret = sprintf(str + ret, "Reserved %d", ep);
2704 else
2705 ret = sprintf(str + ret, "Vendor Defined %d", ep);
2706 if (stream)
2707 ret = sprintf(str + ret, " Stream %d", stream);
2708
2709 return str;
2710}
2711
2712static inline const char *xhci_ep_state_string(u8 state)
2713{
2714 switch (state) {
2715 case EP_STATE_DISABLED:
2716 return "disabled";
2717 case EP_STATE_RUNNING:
2718 return "running";
2719 case EP_STATE_HALTED:
2720 return "halted";
2721 case EP_STATE_STOPPED:
2722 return "stopped";
2723 case EP_STATE_ERROR:
2724 return "error";
2725 default:
2726 return "INVALID";
2727 }
2728}
2729
2730static inline const char *xhci_ep_type_string(u8 type)
2731{
2732 switch (type) {
2733 case ISOC_OUT_EP:
2734 return "Isoc OUT";
2735 case BULK_OUT_EP:
2736 return "Bulk OUT";
2737 case INT_OUT_EP:
2738 return "Int OUT";
2739 case CTRL_EP:
2740 return "Ctrl";
2741 case ISOC_IN_EP:
2742 return "Isoc IN";
2743 case BULK_IN_EP:
2744 return "Bulk IN";
2745 case INT_IN_EP:
2746 return "Int IN";
2747 default:
2748 return "INVALID";
2749 }
2750}
2751
2752static inline const char *xhci_decode_ep_context(char *str, u32 info,
2753 u32 info2, u64 deq, u32 tx_info)
2754{
2755 int ret;
2756
2757 u32 esit;
2758 u16 maxp;
2759 u16 avg;
2760
2761 u8 max_pstr;
2762 u8 ep_state;
2763 u8 interval;
2764 u8 ep_type;
2765 u8 burst;
2766 u8 cerr;
2767 u8 mult;
2768
2769 bool lsa;
2770 bool hid;
2771
2772 esit = CTX_TO_MAX_ESIT_PAYLOAD_HI(info) << 16 |
2773 CTX_TO_MAX_ESIT_PAYLOAD(tx_info);
2774
2775 ep_state = info & EP_STATE_MASK;
2776 max_pstr = CTX_TO_EP_MAXPSTREAMS(info);
2777 interval = CTX_TO_EP_INTERVAL(info);
2778 mult = CTX_TO_EP_MULT(info) + 1;
2779 lsa = !!(info & EP_HAS_LSA);
2780
2781 cerr = (info2 & (3 << 1)) >> 1;
2782 ep_type = CTX_TO_EP_TYPE(info2);
2783 hid = !!(info2 & (1 << 7));
2784 burst = CTX_TO_MAX_BURST(info2);
2785 maxp = MAX_PACKET_DECODED(info2);
2786
2787 avg = EP_AVG_TRB_LENGTH(tx_info);
2788
2789 ret = sprintf(str, "State %s mult %d max P. Streams %d %s",
2790 xhci_ep_state_string(ep_state), mult,
2791 max_pstr, lsa ? "LSA " : "");
2792
2793 ret += sprintf(str + ret, "interval %d us max ESIT payload %d CErr %d ",
2794 (1 << interval) * 125, esit, cerr);
2795
2796 ret += sprintf(str + ret, "Type %s %sburst %d maxp %d deq %016llx ",
2797 xhci_ep_type_string(ep_type), hid ? "HID" : "",
2798 burst, maxp, deq);
2799
2800 ret += sprintf(str + ret, "avg trb len %d", avg);
2801
2802 return str;
2803}
2804
2805#endif /* __LINUX_XHCI_HCD_H */
1/*
2 * xHCI host controller driver
3 *
4 * Copyright (C) 2008 Intel Corp.
5 *
6 * Author: Sarah Sharp
7 * Some code borrowed from the Linux EHCI driver.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
16 * for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software Foundation,
20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23#ifndef __LINUX_XHCI_HCD_H
24#define __LINUX_XHCI_HCD_H
25
26#include <linux/usb.h>
27#include <linux/timer.h>
28#include <linux/kernel.h>
29#include <linux/usb/hcd.h>
30
31/* Code sharing between pci-quirks and xhci hcd */
32#include "xhci-ext-caps.h"
33#include "pci-quirks.h"
34
35/* xHCI PCI Configuration Registers */
36#define XHCI_SBRN_OFFSET (0x60)
37
38/* Max number of USB devices for any host controller - limit in section 6.1 */
39#define MAX_HC_SLOTS 256
40/* Section 5.3.3 - MaxPorts */
41#define MAX_HC_PORTS 127
42
43/*
44 * xHCI register interface.
45 * This corresponds to the eXtensible Host Controller Interface (xHCI)
46 * Revision 0.95 specification
47 */
48
49/**
50 * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
51 * @hc_capbase: length of the capabilities register and HC version number
52 * @hcs_params1: HCSPARAMS1 - Structural Parameters 1
53 * @hcs_params2: HCSPARAMS2 - Structural Parameters 2
54 * @hcs_params3: HCSPARAMS3 - Structural Parameters 3
55 * @hcc_params: HCCPARAMS - Capability Parameters
56 * @db_off: DBOFF - Doorbell array offset
57 * @run_regs_off: RTSOFF - Runtime register space offset
58 */
59struct xhci_cap_regs {
60 __le32 hc_capbase;
61 __le32 hcs_params1;
62 __le32 hcs_params2;
63 __le32 hcs_params3;
64 __le32 hcc_params;
65 __le32 db_off;
66 __le32 run_regs_off;
67 /* Reserved up to (CAPLENGTH - 0x1C) */
68};
69
70/* hc_capbase bitmasks */
71/* bits 7:0 - how long is the Capabilities register */
72#define HC_LENGTH(p) XHCI_HC_LENGTH(p)
73/* bits 31:16 */
74#define HC_VERSION(p) (((p) >> 16) & 0xffff)
75
76/* HCSPARAMS1 - hcs_params1 - bitmasks */
77/* bits 0:7, Max Device Slots */
78#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff)
79#define HCS_SLOTS_MASK 0xff
80/* bits 8:18, Max Interrupters */
81#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff)
82/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
83#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
84
85/* HCSPARAMS2 - hcs_params2 - bitmasks */
86/* bits 0:3, frames or uframes that SW needs to queue transactions
87 * ahead of the HW to meet periodic deadlines */
88#define HCS_IST(p) (((p) >> 0) & 0xf)
89/* bits 4:7, max number of Event Ring segments */
90#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
91/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
92/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
93#define HCS_MAX_SCRATCHPAD(p) (((p) >> 27) & 0x1f)
94
95/* HCSPARAMS3 - hcs_params3 - bitmasks */
96/* bits 0:7, Max U1 to U0 latency for the roothub ports */
97#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff)
98/* bits 16:31, Max U2 to U0 latency for the roothub ports */
99#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff)
100
101/* HCCPARAMS - hcc_params - bitmasks */
102/* true: HC can use 64-bit address pointers */
103#define HCC_64BIT_ADDR(p) ((p) & (1 << 0))
104/* true: HC can do bandwidth negotiation */
105#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1))
106/* true: HC uses 64-byte Device Context structures
107 * FIXME 64-byte context structures aren't supported yet.
108 */
109#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2))
110/* true: HC has port power switches */
111#define HCC_PPC(p) ((p) & (1 << 3))
112/* true: HC has port indicators */
113#define HCS_INDICATOR(p) ((p) & (1 << 4))
114/* true: HC has Light HC Reset Capability */
115#define HCC_LIGHT_RESET(p) ((p) & (1 << 5))
116/* true: HC supports latency tolerance messaging */
117#define HCC_LTC(p) ((p) & (1 << 6))
118/* true: no secondary Stream ID Support */
119#define HCC_NSS(p) ((p) & (1 << 7))
120/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
121#define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1))
122/* Extended Capabilities pointer from PCI base - section 5.3.6 */
123#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p)
124
125/* db_off bitmask - bits 0:1 reserved */
126#define DBOFF_MASK (~0x3)
127
128/* run_regs_off bitmask - bits 0:4 reserved */
129#define RTSOFF_MASK (~0x1f)
130
131
132/* Number of registers per port */
133#define NUM_PORT_REGS 4
134
135/**
136 * struct xhci_op_regs - xHCI Host Controller Operational Registers.
137 * @command: USBCMD - xHC command register
138 * @status: USBSTS - xHC status register
139 * @page_size: This indicates the page size that the host controller
140 * supports. If bit n is set, the HC supports a page size
141 * of 2^(n+12), up to a 128MB page size.
142 * 4K is the minimum page size.
143 * @cmd_ring: CRP - 64-bit Command Ring Pointer
144 * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer
145 * @config_reg: CONFIG - Configure Register
146 * @port_status_base: PORTSCn - base address for Port Status and Control
147 * Each port has a Port Status and Control register,
148 * followed by a Port Power Management Status and Control
149 * register, a Port Link Info register, and a reserved
150 * register.
151 * @port_power_base: PORTPMSCn - base address for
152 * Port Power Management Status and Control
153 * @port_link_base: PORTLIn - base address for Port Link Info (current
154 * Link PM state and control) for USB 2.1 and USB 3.0
155 * devices.
156 */
157struct xhci_op_regs {
158 __le32 command;
159 __le32 status;
160 __le32 page_size;
161 __le32 reserved1;
162 __le32 reserved2;
163 __le32 dev_notification;
164 __le64 cmd_ring;
165 /* rsvd: offset 0x20-2F */
166 __le32 reserved3[4];
167 __le64 dcbaa_ptr;
168 __le32 config_reg;
169 /* rsvd: offset 0x3C-3FF */
170 __le32 reserved4[241];
171 /* port 1 registers, which serve as a base address for other ports */
172 __le32 port_status_base;
173 __le32 port_power_base;
174 __le32 port_link_base;
175 __le32 reserved5;
176 /* registers for ports 2-255 */
177 __le32 reserved6[NUM_PORT_REGS*254];
178};
179
180/* USBCMD - USB command - command bitmasks */
181/* start/stop HC execution - do not write unless HC is halted*/
182#define CMD_RUN XHCI_CMD_RUN
183/* Reset HC - resets internal HC state machine and all registers (except
184 * PCI config regs). HC does NOT drive a USB reset on the downstream ports.
185 * The xHCI driver must reinitialize the xHC after setting this bit.
186 */
187#define CMD_RESET (1 << 1)
188/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
189#define CMD_EIE XHCI_CMD_EIE
190/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
191#define CMD_HSEIE XHCI_CMD_HSEIE
192/* bits 4:6 are reserved (and should be preserved on writes). */
193/* light reset (port status stays unchanged) - reset completed when this is 0 */
194#define CMD_LRESET (1 << 7)
195/* host controller save/restore state. */
196#define CMD_CSS (1 << 8)
197#define CMD_CRS (1 << 9)
198/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
199#define CMD_EWE XHCI_CMD_EWE
200/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
201 * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
202 * '0' means the xHC can power it off if all ports are in the disconnect,
203 * disabled, or powered-off state.
204 */
205#define CMD_PM_INDEX (1 << 11)
206/* bits 12:31 are reserved (and should be preserved on writes). */
207
208/* IMAN - Interrupt Management Register */
209#define IMAN_IP (1 << 1)
210#define IMAN_IE (1 << 0)
211
212/* USBSTS - USB status - status bitmasks */
213/* HC not running - set to 1 when run/stop bit is cleared. */
214#define STS_HALT XHCI_STS_HALT
215/* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */
216#define STS_FATAL (1 << 2)
217/* event interrupt - clear this prior to clearing any IP flags in IR set*/
218#define STS_EINT (1 << 3)
219/* port change detect */
220#define STS_PORT (1 << 4)
221/* bits 5:7 reserved and zeroed */
222/* save state status - '1' means xHC is saving state */
223#define STS_SAVE (1 << 8)
224/* restore state status - '1' means xHC is restoring state */
225#define STS_RESTORE (1 << 9)
226/* true: save or restore error */
227#define STS_SRE (1 << 10)
228/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
229#define STS_CNR XHCI_STS_CNR
230/* true: internal Host Controller Error - SW needs to reset and reinitialize */
231#define STS_HCE (1 << 12)
232/* bits 13:31 reserved and should be preserved */
233
234/*
235 * DNCTRL - Device Notification Control Register - dev_notification bitmasks
236 * Generate a device notification event when the HC sees a transaction with a
237 * notification type that matches a bit set in this bit field.
238 */
239#define DEV_NOTE_MASK (0xffff)
240#define ENABLE_DEV_NOTE(x) (1 << (x))
241/* Most of the device notification types should only be used for debug.
242 * SW does need to pay attention to function wake notifications.
243 */
244#define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1)
245
246/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
247/* bit 0 is the command ring cycle state */
248/* stop ring operation after completion of the currently executing command */
249#define CMD_RING_PAUSE (1 << 1)
250/* stop ring immediately - abort the currently executing command */
251#define CMD_RING_ABORT (1 << 2)
252/* true: command ring is running */
253#define CMD_RING_RUNNING (1 << 3)
254/* bits 4:5 reserved and should be preserved */
255/* Command Ring pointer - bit mask for the lower 32 bits. */
256#define CMD_RING_RSVD_BITS (0x3f)
257
258/* CONFIG - Configure Register - config_reg bitmasks */
259/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
260#define MAX_DEVS(p) ((p) & 0xff)
261/* bits 8:31 - reserved and should be preserved */
262
263/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
264/* true: device connected */
265#define PORT_CONNECT (1 << 0)
266/* true: port enabled */
267#define PORT_PE (1 << 1)
268/* bit 2 reserved and zeroed */
269/* true: port has an over-current condition */
270#define PORT_OC (1 << 3)
271/* true: port reset signaling asserted */
272#define PORT_RESET (1 << 4)
273/* Port Link State - bits 5:8
274 * A read gives the current link PM state of the port,
275 * a write with Link State Write Strobe set sets the link state.
276 */
277#define PORT_PLS_MASK (0xf << 5)
278#define XDEV_U0 (0x0 << 5)
279#define XDEV_U2 (0x2 << 5)
280#define XDEV_U3 (0x3 << 5)
281#define XDEV_RESUME (0xf << 5)
282/* true: port has power (see HCC_PPC) */
283#define PORT_POWER (1 << 9)
284/* bits 10:13 indicate device speed:
285 * 0 - undefined speed - port hasn't be initialized by a reset yet
286 * 1 - full speed
287 * 2 - low speed
288 * 3 - high speed
289 * 4 - super speed
290 * 5-15 reserved
291 */
292#define DEV_SPEED_MASK (0xf << 10)
293#define XDEV_FS (0x1 << 10)
294#define XDEV_LS (0x2 << 10)
295#define XDEV_HS (0x3 << 10)
296#define XDEV_SS (0x4 << 10)
297#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10))
298#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
299#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS)
300#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
301#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
302/* Bits 20:23 in the Slot Context are the speed for the device */
303#define SLOT_SPEED_FS (XDEV_FS << 10)
304#define SLOT_SPEED_LS (XDEV_LS << 10)
305#define SLOT_SPEED_HS (XDEV_HS << 10)
306#define SLOT_SPEED_SS (XDEV_SS << 10)
307/* Port Indicator Control */
308#define PORT_LED_OFF (0 << 14)
309#define PORT_LED_AMBER (1 << 14)
310#define PORT_LED_GREEN (2 << 14)
311#define PORT_LED_MASK (3 << 14)
312/* Port Link State Write Strobe - set this when changing link state */
313#define PORT_LINK_STROBE (1 << 16)
314/* true: connect status change */
315#define PORT_CSC (1 << 17)
316/* true: port enable change */
317#define PORT_PEC (1 << 18)
318/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port
319 * into an enabled state, and the device into the default state. A "warm" reset
320 * also resets the link, forcing the device through the link training sequence.
321 * SW can also look at the Port Reset register to see when warm reset is done.
322 */
323#define PORT_WRC (1 << 19)
324/* true: over-current change */
325#define PORT_OCC (1 << 20)
326/* true: reset change - 1 to 0 transition of PORT_RESET */
327#define PORT_RC (1 << 21)
328/* port link status change - set on some port link state transitions:
329 * Transition Reason
330 * ------------------------------------------------------------------------------
331 * - U3 to Resume Wakeup signaling from a device
332 * - Resume to Recovery to U0 USB 3.0 device resume
333 * - Resume to U0 USB 2.0 device resume
334 * - U3 to Recovery to U0 Software resume of USB 3.0 device complete
335 * - U3 to U0 Software resume of USB 2.0 device complete
336 * - U2 to U0 L1 resume of USB 2.1 device complete
337 * - U0 to U0 (???) L1 entry rejection by USB 2.1 device
338 * - U0 to disabled L1 entry error with USB 2.1 device
339 * - Any state to inactive Error on USB 3.0 port
340 */
341#define PORT_PLC (1 << 22)
342/* port configure error change - port failed to configure its link partner */
343#define PORT_CEC (1 << 23)
344/* Cold Attach Status - xHC can set this bit to report device attached during
345 * Sx state. Warm port reset should be perfomed to clear this bit and move port
346 * to connected state.
347 */
348#define PORT_CAS (1 << 24)
349/* wake on connect (enable) */
350#define PORT_WKCONN_E (1 << 25)
351/* wake on disconnect (enable) */
352#define PORT_WKDISC_E (1 << 26)
353/* wake on over-current (enable) */
354#define PORT_WKOC_E (1 << 27)
355/* bits 28:29 reserved */
356/* true: device is removable - for USB 3.0 roothub emulation */
357#define PORT_DEV_REMOVE (1 << 30)
358/* Initiate a warm port reset - complete when PORT_WRC is '1' */
359#define PORT_WR (1 << 31)
360
361/* We mark duplicate entries with -1 */
362#define DUPLICATE_ENTRY ((u8)(-1))
363
364/* Port Power Management Status and Control - port_power_base bitmasks */
365/* Inactivity timer value for transitions into U1, in microseconds.
366 * Timeout can be up to 127us. 0xFF means an infinite timeout.
367 */
368#define PORT_U1_TIMEOUT(p) ((p) & 0xff)
369#define PORT_U1_TIMEOUT_MASK 0xff
370/* Inactivity timer value for transitions into U2 */
371#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8)
372#define PORT_U2_TIMEOUT_MASK (0xff << 8)
373/* Bits 24:31 for port testing */
374
375/* USB2 Protocol PORTSPMSC */
376#define PORT_L1S_MASK 7
377#define PORT_L1S_SUCCESS 1
378#define PORT_RWE (1 << 3)
379#define PORT_HIRD(p) (((p) & 0xf) << 4)
380#define PORT_HIRD_MASK (0xf << 4)
381#define PORT_L1DS(p) (((p) & 0xff) << 8)
382#define PORT_HLE (1 << 16)
383
384/**
385 * struct xhci_intr_reg - Interrupt Register Set
386 * @irq_pending: IMAN - Interrupt Management Register. Used to enable
387 * interrupts and check for pending interrupts.
388 * @irq_control: IMOD - Interrupt Moderation Register.
389 * Used to throttle interrupts.
390 * @erst_size: Number of segments in the Event Ring Segment Table (ERST).
391 * @erst_base: ERST base address.
392 * @erst_dequeue: Event ring dequeue pointer.
393 *
394 * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
395 * Ring Segment Table (ERST) associated with it. The event ring is comprised of
396 * multiple segments of the same size. The HC places events on the ring and
397 * "updates the Cycle bit in the TRBs to indicate to software the current
398 * position of the Enqueue Pointer." The HCD (Linux) processes those events and
399 * updates the dequeue pointer.
400 */
401struct xhci_intr_reg {
402 __le32 irq_pending;
403 __le32 irq_control;
404 __le32 erst_size;
405 __le32 rsvd;
406 __le64 erst_base;
407 __le64 erst_dequeue;
408};
409
410/* irq_pending bitmasks */
411#define ER_IRQ_PENDING(p) ((p) & 0x1)
412/* bits 2:31 need to be preserved */
413/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
414#define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe)
415#define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2)
416#define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2))
417
418/* irq_control bitmasks */
419/* Minimum interval between interrupts (in 250ns intervals). The interval
420 * between interrupts will be longer if there are no events on the event ring.
421 * Default is 4000 (1 ms).
422 */
423#define ER_IRQ_INTERVAL_MASK (0xffff)
424/* Counter used to count down the time to the next interrupt - HW use only */
425#define ER_IRQ_COUNTER_MASK (0xffff << 16)
426
427/* erst_size bitmasks */
428/* Preserve bits 16:31 of erst_size */
429#define ERST_SIZE_MASK (0xffff << 16)
430
431/* erst_dequeue bitmasks */
432/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
433 * where the current dequeue pointer lies. This is an optional HW hint.
434 */
435#define ERST_DESI_MASK (0x7)
436/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
437 * a work queue (or delayed service routine)?
438 */
439#define ERST_EHB (1 << 3)
440#define ERST_PTR_MASK (0xf)
441
442/**
443 * struct xhci_run_regs
444 * @microframe_index:
445 * MFINDEX - current microframe number
446 *
447 * Section 5.5 Host Controller Runtime Registers:
448 * "Software should read and write these registers using only Dword (32 bit)
449 * or larger accesses"
450 */
451struct xhci_run_regs {
452 __le32 microframe_index;
453 __le32 rsvd[7];
454 struct xhci_intr_reg ir_set[128];
455};
456
457/**
458 * struct doorbell_array
459 *
460 * Bits 0 - 7: Endpoint target
461 * Bits 8 - 15: RsvdZ
462 * Bits 16 - 31: Stream ID
463 *
464 * Section 5.6
465 */
466struct xhci_doorbell_array {
467 __le32 doorbell[256];
468};
469
470#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
471#define DB_VALUE_HOST 0x00000000
472
473/**
474 * struct xhci_protocol_caps
475 * @revision: major revision, minor revision, capability ID,
476 * and next capability pointer.
477 * @name_string: Four ASCII characters to say which spec this xHC
478 * follows, typically "USB ".
479 * @port_info: Port offset, count, and protocol-defined information.
480 */
481struct xhci_protocol_caps {
482 u32 revision;
483 u32 name_string;
484 u32 port_info;
485};
486
487#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
488#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
489#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
490
491/**
492 * struct xhci_container_ctx
493 * @type: Type of context. Used to calculated offsets to contained contexts.
494 * @size: Size of the context data
495 * @bytes: The raw context data given to HW
496 * @dma: dma address of the bytes
497 *
498 * Represents either a Device or Input context. Holds a pointer to the raw
499 * memory used for the context (bytes) and dma address of it (dma).
500 */
501struct xhci_container_ctx {
502 unsigned type;
503#define XHCI_CTX_TYPE_DEVICE 0x1
504#define XHCI_CTX_TYPE_INPUT 0x2
505
506 int size;
507
508 u8 *bytes;
509 dma_addr_t dma;
510};
511
512/**
513 * struct xhci_slot_ctx
514 * @dev_info: Route string, device speed, hub info, and last valid endpoint
515 * @dev_info2: Max exit latency for device number, root hub port number
516 * @tt_info: tt_info is used to construct split transaction tokens
517 * @dev_state: slot state and device address
518 *
519 * Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context
520 * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
521 * reserved at the end of the slot context for HC internal use.
522 */
523struct xhci_slot_ctx {
524 __le32 dev_info;
525 __le32 dev_info2;
526 __le32 tt_info;
527 __le32 dev_state;
528 /* offset 0x10 to 0x1f reserved for HC internal use */
529 __le32 reserved[4];
530};
531
532/* dev_info bitmasks */
533/* Route String - 0:19 */
534#define ROUTE_STRING_MASK (0xfffff)
535/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
536#define DEV_SPEED (0xf << 20)
537/* bit 24 reserved */
538/* Is this LS/FS device connected through a HS hub? - bit 25 */
539#define DEV_MTT (0x1 << 25)
540/* Set if the device is a hub - bit 26 */
541#define DEV_HUB (0x1 << 26)
542/* Index of the last valid endpoint context in this device context - 27:31 */
543#define LAST_CTX_MASK (0x1f << 27)
544#define LAST_CTX(p) ((p) << 27)
545#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
546#define SLOT_FLAG (1 << 0)
547#define EP0_FLAG (1 << 1)
548
549/* dev_info2 bitmasks */
550/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
551#define MAX_EXIT (0xffff)
552/* Root hub port number that is needed to access the USB device */
553#define ROOT_HUB_PORT(p) (((p) & 0xff) << 16)
554#define DEVINFO_TO_ROOT_HUB_PORT(p) (((p) >> 16) & 0xff)
555/* Maximum number of ports under a hub device */
556#define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24)
557
558/* tt_info bitmasks */
559/*
560 * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
561 * The Slot ID of the hub that isolates the high speed signaling from
562 * this low or full-speed device. '0' if attached to root hub port.
563 */
564#define TT_SLOT (0xff)
565/*
566 * The number of the downstream facing port of the high-speed hub
567 * '0' if the device is not low or full speed.
568 */
569#define TT_PORT (0xff << 8)
570#define TT_THINK_TIME(p) (((p) & 0x3) << 16)
571
572/* dev_state bitmasks */
573/* USB device address - assigned by the HC */
574#define DEV_ADDR_MASK (0xff)
575/* bits 8:26 reserved */
576/* Slot state */
577#define SLOT_STATE (0x1f << 27)
578#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
579
580#define SLOT_STATE_DISABLED 0
581#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED
582#define SLOT_STATE_DEFAULT 1
583#define SLOT_STATE_ADDRESSED 2
584#define SLOT_STATE_CONFIGURED 3
585
586/**
587 * struct xhci_ep_ctx
588 * @ep_info: endpoint state, streams, mult, and interval information.
589 * @ep_info2: information on endpoint type, max packet size, max burst size,
590 * error count, and whether the HC will force an event for all
591 * transactions.
592 * @deq: 64-bit ring dequeue pointer address. If the endpoint only
593 * defines one stream, this points to the endpoint transfer ring.
594 * Otherwise, it points to a stream context array, which has a
595 * ring pointer for each flow.
596 * @tx_info:
597 * Average TRB lengths for the endpoint ring and
598 * max payload within an Endpoint Service Interval Time (ESIT).
599 *
600 * Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context
601 * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
602 * reserved at the end of the endpoint context for HC internal use.
603 */
604struct xhci_ep_ctx {
605 __le32 ep_info;
606 __le32 ep_info2;
607 __le64 deq;
608 __le32 tx_info;
609 /* offset 0x14 - 0x1f reserved for HC internal use */
610 __le32 reserved[3];
611};
612
613/* ep_info bitmasks */
614/*
615 * Endpoint State - bits 0:2
616 * 0 - disabled
617 * 1 - running
618 * 2 - halted due to halt condition - ok to manipulate endpoint ring
619 * 3 - stopped
620 * 4 - TRB error
621 * 5-7 - reserved
622 */
623#define EP_STATE_MASK (0xf)
624#define EP_STATE_DISABLED 0
625#define EP_STATE_RUNNING 1
626#define EP_STATE_HALTED 2
627#define EP_STATE_STOPPED 3
628#define EP_STATE_ERROR 4
629/* Mult - Max number of burtst within an interval, in EP companion desc. */
630#define EP_MULT(p) (((p) & 0x3) << 8)
631#define CTX_TO_EP_MULT(p) (((p) >> 8) & 0x3)
632/* bits 10:14 are Max Primary Streams */
633/* bit 15 is Linear Stream Array */
634/* Interval - period between requests to an endpoint - 125u increments. */
635#define EP_INTERVAL(p) (((p) & 0xff) << 16)
636#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff))
637#define CTX_TO_EP_INTERVAL(p) (((p) >> 16) & 0xff)
638#define EP_MAXPSTREAMS_MASK (0x1f << 10)
639#define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK)
640/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
641#define EP_HAS_LSA (1 << 15)
642
643/* ep_info2 bitmasks */
644/*
645 * Force Event - generate transfer events for all TRBs for this endpoint
646 * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
647 */
648#define FORCE_EVENT (0x1)
649#define ERROR_COUNT(p) (((p) & 0x3) << 1)
650#define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7)
651#define EP_TYPE(p) ((p) << 3)
652#define ISOC_OUT_EP 1
653#define BULK_OUT_EP 2
654#define INT_OUT_EP 3
655#define CTRL_EP 4
656#define ISOC_IN_EP 5
657#define BULK_IN_EP 6
658#define INT_IN_EP 7
659/* bit 6 reserved */
660/* bit 7 is Host Initiate Disable - for disabling stream selection */
661#define MAX_BURST(p) (((p)&0xff) << 8)
662#define CTX_TO_MAX_BURST(p) (((p) >> 8) & 0xff)
663#define MAX_PACKET(p) (((p)&0xffff) << 16)
664#define MAX_PACKET_MASK (0xffff << 16)
665#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)
666
667/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
668 * USB2.0 spec 9.6.6.
669 */
670#define GET_MAX_PACKET(p) ((p) & 0x7ff)
671
672/* tx_info bitmasks */
673#define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff)
674#define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16)
675#define CTX_TO_MAX_ESIT_PAYLOAD(p) (((p) >> 16) & 0xffff)
676
677/* deq bitmasks */
678#define EP_CTX_CYCLE_MASK (1 << 0)
679
680
681/**
682 * struct xhci_input_control_context
683 * Input control context; see section 6.2.5.
684 *
685 * @drop_context: set the bit of the endpoint context you want to disable
686 * @add_context: set the bit of the endpoint context you want to enable
687 */
688struct xhci_input_control_ctx {
689 __le32 drop_flags;
690 __le32 add_flags;
691 __le32 rsvd2[6];
692};
693
694#define EP_IS_ADDED(ctrl_ctx, i) \
695 (le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))
696#define EP_IS_DROPPED(ctrl_ctx, i) \
697 (le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1)))
698
699/* Represents everything that is needed to issue a command on the command ring.
700 * It's useful to pre-allocate these for commands that cannot fail due to
701 * out-of-memory errors, like freeing streams.
702 */
703struct xhci_command {
704 /* Input context for changing device state */
705 struct xhci_container_ctx *in_ctx;
706 u32 status;
707 /* If completion is null, no one is waiting on this command
708 * and the structure can be freed after the command completes.
709 */
710 struct completion *completion;
711 union xhci_trb *command_trb;
712 struct list_head cmd_list;
713};
714
715/* drop context bitmasks */
716#define DROP_EP(x) (0x1 << x)
717/* add context bitmasks */
718#define ADD_EP(x) (0x1 << x)
719
720struct xhci_stream_ctx {
721 /* 64-bit stream ring address, cycle state, and stream type */
722 __le64 stream_ring;
723 /* offset 0x14 - 0x1f reserved for HC internal use */
724 __le32 reserved[2];
725};
726
727/* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */
728#define SCT_FOR_CTX(p) (((p) << 1) & 0x7)
729/* Secondary stream array type, dequeue pointer is to a transfer ring */
730#define SCT_SEC_TR 0
731/* Primary stream array type, dequeue pointer is to a transfer ring */
732#define SCT_PRI_TR 1
733/* Dequeue pointer is for a secondary stream array (SSA) with 8 entries */
734#define SCT_SSA_8 2
735#define SCT_SSA_16 3
736#define SCT_SSA_32 4
737#define SCT_SSA_64 5
738#define SCT_SSA_128 6
739#define SCT_SSA_256 7
740
741/* Assume no secondary streams for now */
742struct xhci_stream_info {
743 struct xhci_ring **stream_rings;
744 /* Number of streams, including stream 0 (which drivers can't use) */
745 unsigned int num_streams;
746 /* The stream context array may be bigger than
747 * the number of streams the driver asked for
748 */
749 struct xhci_stream_ctx *stream_ctx_array;
750 unsigned int num_stream_ctxs;
751 dma_addr_t ctx_array_dma;
752 /* For mapping physical TRB addresses to segments in stream rings */
753 struct radix_tree_root trb_address_map;
754 struct xhci_command *free_streams_command;
755};
756
757#define SMALL_STREAM_ARRAY_SIZE 256
758#define MEDIUM_STREAM_ARRAY_SIZE 1024
759
760/* Some Intel xHCI host controllers need software to keep track of the bus
761 * bandwidth. Keep track of endpoint info here. Each root port is allocated
762 * the full bus bandwidth. We must also treat TTs (including each port under a
763 * multi-TT hub) as a separate bandwidth domain. The direct memory interface
764 * (DMI) also limits the total bandwidth (across all domains) that can be used.
765 */
766struct xhci_bw_info {
767 /* ep_interval is zero-based */
768 unsigned int ep_interval;
769 /* mult and num_packets are one-based */
770 unsigned int mult;
771 unsigned int num_packets;
772 unsigned int max_packet_size;
773 unsigned int max_esit_payload;
774 unsigned int type;
775};
776
777/* "Block" sizes in bytes the hardware uses for different device speeds.
778 * The logic in this part of the hardware limits the number of bits the hardware
779 * can use, so must represent bandwidth in a less precise manner to mimic what
780 * the scheduler hardware computes.
781 */
782#define FS_BLOCK 1
783#define HS_BLOCK 4
784#define SS_BLOCK 16
785#define DMI_BLOCK 32
786
787/* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated
788 * with each byte transferred. SuperSpeed devices have an initial overhead to
789 * set up bursts. These are in blocks, see above. LS overhead has already been
790 * translated into FS blocks.
791 */
792#define DMI_OVERHEAD 8
793#define DMI_OVERHEAD_BURST 4
794#define SS_OVERHEAD 8
795#define SS_OVERHEAD_BURST 32
796#define HS_OVERHEAD 26
797#define FS_OVERHEAD 20
798#define LS_OVERHEAD 128
799/* The TTs need to claim roughly twice as much bandwidth (94 bytes per
800 * microframe ~= 24Mbps) of the HS bus as the devices can actually use because
801 * of overhead associated with split transfers crossing microframe boundaries.
802 * 31 blocks is pure protocol overhead.
803 */
804#define TT_HS_OVERHEAD (31 + 94)
805#define TT_DMI_OVERHEAD (25 + 12)
806
807/* Bandwidth limits in blocks */
808#define FS_BW_LIMIT 1285
809#define TT_BW_LIMIT 1320
810#define HS_BW_LIMIT 1607
811#define SS_BW_LIMIT_IN 3906
812#define DMI_BW_LIMIT_IN 3906
813#define SS_BW_LIMIT_OUT 3906
814#define DMI_BW_LIMIT_OUT 3906
815
816/* Percentage of bus bandwidth reserved for non-periodic transfers */
817#define FS_BW_RESERVED 10
818#define HS_BW_RESERVED 20
819#define SS_BW_RESERVED 10
820
821struct xhci_virt_ep {
822 struct xhci_ring *ring;
823 /* Related to endpoints that are configured to use stream IDs only */
824 struct xhci_stream_info *stream_info;
825 /* Temporary storage in case the configure endpoint command fails and we
826 * have to restore the device state to the previous state
827 */
828 struct xhci_ring *new_ring;
829 unsigned int ep_state;
830#define SET_DEQ_PENDING (1 << 0)
831#define EP_HALTED (1 << 1) /* For stall handling */
832#define EP_HALT_PENDING (1 << 2) /* For URB cancellation */
833/* Transitioning the endpoint to using streams, don't enqueue URBs */
834#define EP_GETTING_STREAMS (1 << 3)
835#define EP_HAS_STREAMS (1 << 4)
836/* Transitioning the endpoint to not using streams, don't enqueue URBs */
837#define EP_GETTING_NO_STREAMS (1 << 5)
838 /* ---- Related to URB cancellation ---- */
839 struct list_head cancelled_td_list;
840 /* The TRB that was last reported in a stopped endpoint ring */
841 union xhci_trb *stopped_trb;
842 struct xhci_td *stopped_td;
843 unsigned int stopped_stream;
844 /* Watchdog timer for stop endpoint command to cancel URBs */
845 struct timer_list stop_cmd_timer;
846 int stop_cmds_pending;
847 struct xhci_hcd *xhci;
848 /* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue
849 * command. We'll need to update the ring's dequeue segment and dequeue
850 * pointer after the command completes.
851 */
852 struct xhci_segment *queued_deq_seg;
853 union xhci_trb *queued_deq_ptr;
854 /*
855 * Sometimes the xHC can not process isochronous endpoint ring quickly
856 * enough, and it will miss some isoc tds on the ring and generate
857 * a Missed Service Error Event.
858 * Set skip flag when receive a Missed Service Error Event and
859 * process the missed tds on the endpoint ring.
860 */
861 bool skip;
862 /* Bandwidth checking storage */
863 struct xhci_bw_info bw_info;
864 struct list_head bw_endpoint_list;
865};
866
867enum xhci_overhead_type {
868 LS_OVERHEAD_TYPE = 0,
869 FS_OVERHEAD_TYPE,
870 HS_OVERHEAD_TYPE,
871};
872
873struct xhci_interval_bw {
874 unsigned int num_packets;
875 /* Sorted by max packet size.
876 * Head of the list is the greatest max packet size.
877 */
878 struct list_head endpoints;
879 /* How many endpoints of each speed are present. */
880 unsigned int overhead[3];
881};
882
883#define XHCI_MAX_INTERVAL 16
884
885struct xhci_interval_bw_table {
886 unsigned int interval0_esit_payload;
887 struct xhci_interval_bw interval_bw[XHCI_MAX_INTERVAL];
888 /* Includes reserved bandwidth for async endpoints */
889 unsigned int bw_used;
890 unsigned int ss_bw_in;
891 unsigned int ss_bw_out;
892};
893
894
895struct xhci_virt_device {
896 struct usb_device *udev;
897 /*
898 * Commands to the hardware are passed an "input context" that
899 * tells the hardware what to change in its data structures.
900 * The hardware will return changes in an "output context" that
901 * software must allocate for the hardware. We need to keep
902 * track of input and output contexts separately because
903 * these commands might fail and we don't trust the hardware.
904 */
905 struct xhci_container_ctx *out_ctx;
906 /* Used for addressing devices and configuration changes */
907 struct xhci_container_ctx *in_ctx;
908 /* Rings saved to ensure old alt settings can be re-instated */
909 struct xhci_ring **ring_cache;
910 int num_rings_cached;
911 /* Store xHC assigned device address */
912 int address;
913#define XHCI_MAX_RINGS_CACHED 31
914 struct xhci_virt_ep eps[31];
915 struct completion cmd_completion;
916 /* Status of the last command issued for this device */
917 u32 cmd_status;
918 struct list_head cmd_list;
919 u8 fake_port;
920 u8 real_port;
921 struct xhci_interval_bw_table *bw_table;
922 struct xhci_tt_bw_info *tt_info;
923 /* The current max exit latency for the enabled USB3 link states. */
924 u16 current_mel;
925};
926
927/*
928 * For each roothub, keep track of the bandwidth information for each periodic
929 * interval.
930 *
931 * If a high speed hub is attached to the roothub, each TT associated with that
932 * hub is a separate bandwidth domain. The interval information for the
933 * endpoints on the devices under that TT will appear in the TT structure.
934 */
935struct xhci_root_port_bw_info {
936 struct list_head tts;
937 unsigned int num_active_tts;
938 struct xhci_interval_bw_table bw_table;
939};
940
941struct xhci_tt_bw_info {
942 struct list_head tt_list;
943 int slot_id;
944 int ttport;
945 struct xhci_interval_bw_table bw_table;
946 int active_eps;
947};
948
949
950/**
951 * struct xhci_device_context_array
952 * @dev_context_ptr array of 64-bit DMA addresses for device contexts
953 */
954struct xhci_device_context_array {
955 /* 64-bit device addresses; we only write 32-bit addresses */
956 __le64 dev_context_ptrs[MAX_HC_SLOTS];
957 /* private xHCD pointers */
958 dma_addr_t dma;
959};
960/* TODO: write function to set the 64-bit device DMA address */
961/*
962 * TODO: change this to be dynamically sized at HC mem init time since the HC
963 * might not be able to handle the maximum number of devices possible.
964 */
965
966
967struct xhci_transfer_event {
968 /* 64-bit buffer address, or immediate data */
969 __le64 buffer;
970 __le32 transfer_len;
971 /* This field is interpreted differently based on the type of TRB */
972 __le32 flags;
973};
974
975/** Transfer Event bit fields **/
976#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
977
978/* Completion Code - only applicable for some types of TRBs */
979#define COMP_CODE_MASK (0xff << 24)
980#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
981#define COMP_SUCCESS 1
982/* Data Buffer Error */
983#define COMP_DB_ERR 2
984/* Babble Detected Error */
985#define COMP_BABBLE 3
986/* USB Transaction Error */
987#define COMP_TX_ERR 4
988/* TRB Error - some TRB field is invalid */
989#define COMP_TRB_ERR 5
990/* Stall Error - USB device is stalled */
991#define COMP_STALL 6
992/* Resource Error - HC doesn't have memory for that device configuration */
993#define COMP_ENOMEM 7
994/* Bandwidth Error - not enough room in schedule for this dev config */
995#define COMP_BW_ERR 8
996/* No Slots Available Error - HC ran out of device slots */
997#define COMP_ENOSLOTS 9
998/* Invalid Stream Type Error */
999#define COMP_STREAM_ERR 10
1000/* Slot Not Enabled Error - doorbell rung for disabled device slot */
1001#define COMP_EBADSLT 11
1002/* Endpoint Not Enabled Error */
1003#define COMP_EBADEP 12
1004/* Short Packet */
1005#define COMP_SHORT_TX 13
1006/* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
1007#define COMP_UNDERRUN 14
1008/* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
1009#define COMP_OVERRUN 15
1010/* Virtual Function Event Ring Full Error */
1011#define COMP_VF_FULL 16
1012/* Parameter Error - Context parameter is invalid */
1013#define COMP_EINVAL 17
1014/* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
1015#define COMP_BW_OVER 18
1016/* Context State Error - illegal context state transition requested */
1017#define COMP_CTX_STATE 19
1018/* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
1019#define COMP_PING_ERR 20
1020/* Event Ring is full */
1021#define COMP_ER_FULL 21
1022/* Incompatible Device Error */
1023#define COMP_DEV_ERR 22
1024/* Missed Service Error - HC couldn't service an isoc ep within interval */
1025#define COMP_MISSED_INT 23
1026/* Successfully stopped command ring */
1027#define COMP_CMD_STOP 24
1028/* Successfully aborted current command and stopped command ring */
1029#define COMP_CMD_ABORT 25
1030/* Stopped - transfer was terminated by a stop endpoint command */
1031#define COMP_STOP 26
1032/* Same as COMP_EP_STOPPED, but the transferred length in the event is invalid */
1033#define COMP_STOP_INVAL 27
1034/* Control Abort Error - Debug Capability - control pipe aborted */
1035#define COMP_DBG_ABORT 28
1036/* Max Exit Latency Too Large Error */
1037#define COMP_MEL_ERR 29
1038/* TRB type 30 reserved */
1039/* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
1040#define COMP_BUFF_OVER 31
1041/* Event Lost Error - xHC has an "internal event overrun condition" */
1042#define COMP_ISSUES 32
1043/* Undefined Error - reported when other error codes don't apply */
1044#define COMP_UNKNOWN 33
1045/* Invalid Stream ID Error */
1046#define COMP_STRID_ERR 34
1047/* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
1048#define COMP_2ND_BW_ERR 35
1049/* Split Transaction Error */
1050#define COMP_SPLIT_ERR 36
1051
1052struct xhci_link_trb {
1053 /* 64-bit segment pointer*/
1054 __le64 segment_ptr;
1055 __le32 intr_target;
1056 __le32 control;
1057};
1058
1059/* control bitfields */
1060#define LINK_TOGGLE (0x1<<1)
1061
1062/* Command completion event TRB */
1063struct xhci_event_cmd {
1064 /* Pointer to command TRB, or the value passed by the event data trb */
1065 __le64 cmd_trb;
1066 __le32 status;
1067 __le32 flags;
1068};
1069
1070/* flags bitmasks */
1071/* bits 16:23 are the virtual function ID */
1072/* bits 24:31 are the slot ID */
1073#define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24)
1074#define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24)
1075
1076/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
1077#define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1)
1078#define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16)
1079
1080#define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23)
1081#define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23)
1082#define LAST_EP_INDEX 30
1083
1084/* Set TR Dequeue Pointer command TRB fields */
1085#define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16))
1086#define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16)
1087
1088
1089/* Port Status Change Event TRB fields */
1090/* Port ID - bits 31:24 */
1091#define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24)
1092
1093/* Normal TRB fields */
1094/* transfer_len bitmasks - bits 0:16 */
1095#define TRB_LEN(p) ((p) & 0x1ffff)
1096/* Interrupter Target - which MSI-X vector to target the completion event at */
1097#define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22)
1098#define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff)
1099#define TRB_TBC(p) (((p) & 0x3) << 7)
1100#define TRB_TLBPC(p) (((p) & 0xf) << 16)
1101
1102/* Cycle bit - indicates TRB ownership by HC or HCD */
1103#define TRB_CYCLE (1<<0)
1104/*
1105 * Force next event data TRB to be evaluated before task switch.
1106 * Used to pass OS data back after a TD completes.
1107 */
1108#define TRB_ENT (1<<1)
1109/* Interrupt on short packet */
1110#define TRB_ISP (1<<2)
1111/* Set PCIe no snoop attribute */
1112#define TRB_NO_SNOOP (1<<3)
1113/* Chain multiple TRBs into a TD */
1114#define TRB_CHAIN (1<<4)
1115/* Interrupt on completion */
1116#define TRB_IOC (1<<5)
1117/* The buffer pointer contains immediate data */
1118#define TRB_IDT (1<<6)
1119
1120/* Block Event Interrupt */
1121#define TRB_BEI (1<<9)
1122
1123/* Control transfer TRB specific fields */
1124#define TRB_DIR_IN (1<<16)
1125#define TRB_TX_TYPE(p) ((p) << 16)
1126#define TRB_DATA_OUT 2
1127#define TRB_DATA_IN 3
1128
1129/* Isochronous TRB specific fields */
1130#define TRB_SIA (1<<31)
1131
1132struct xhci_generic_trb {
1133 __le32 field[4];
1134};
1135
1136union xhci_trb {
1137 struct xhci_link_trb link;
1138 struct xhci_transfer_event trans_event;
1139 struct xhci_event_cmd event_cmd;
1140 struct xhci_generic_trb generic;
1141};
1142
1143/* TRB bit mask */
1144#define TRB_TYPE_BITMASK (0xfc00)
1145#define TRB_TYPE(p) ((p) << 10)
1146#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
1147/* TRB type IDs */
1148/* bulk, interrupt, isoc scatter/gather, and control data stage */
1149#define TRB_NORMAL 1
1150/* setup stage for control transfers */
1151#define TRB_SETUP 2
1152/* data stage for control transfers */
1153#define TRB_DATA 3
1154/* status stage for control transfers */
1155#define TRB_STATUS 4
1156/* isoc transfers */
1157#define TRB_ISOC 5
1158/* TRB for linking ring segments */
1159#define TRB_LINK 6
1160#define TRB_EVENT_DATA 7
1161/* Transfer Ring No-op (not for the command ring) */
1162#define TRB_TR_NOOP 8
1163/* Command TRBs */
1164/* Enable Slot Command */
1165#define TRB_ENABLE_SLOT 9
1166/* Disable Slot Command */
1167#define TRB_DISABLE_SLOT 10
1168/* Address Device Command */
1169#define TRB_ADDR_DEV 11
1170/* Configure Endpoint Command */
1171#define TRB_CONFIG_EP 12
1172/* Evaluate Context Command */
1173#define TRB_EVAL_CONTEXT 13
1174/* Reset Endpoint Command */
1175#define TRB_RESET_EP 14
1176/* Stop Transfer Ring Command */
1177#define TRB_STOP_RING 15
1178/* Set Transfer Ring Dequeue Pointer Command */
1179#define TRB_SET_DEQ 16
1180/* Reset Device Command */
1181#define TRB_RESET_DEV 17
1182/* Force Event Command (opt) */
1183#define TRB_FORCE_EVENT 18
1184/* Negotiate Bandwidth Command (opt) */
1185#define TRB_NEG_BANDWIDTH 19
1186/* Set Latency Tolerance Value Command (opt) */
1187#define TRB_SET_LT 20
1188/* Get port bandwidth Command */
1189#define TRB_GET_BW 21
1190/* Force Header Command - generate a transaction or link management packet */
1191#define TRB_FORCE_HEADER 22
1192/* No-op Command - not for transfer rings */
1193#define TRB_CMD_NOOP 23
1194/* TRB IDs 24-31 reserved */
1195/* Event TRBS */
1196/* Transfer Event */
1197#define TRB_TRANSFER 32
1198/* Command Completion Event */
1199#define TRB_COMPLETION 33
1200/* Port Status Change Event */
1201#define TRB_PORT_STATUS 34
1202/* Bandwidth Request Event (opt) */
1203#define TRB_BANDWIDTH_EVENT 35
1204/* Doorbell Event (opt) */
1205#define TRB_DOORBELL 36
1206/* Host Controller Event */
1207#define TRB_HC_EVENT 37
1208/* Device Notification Event - device sent function wake notification */
1209#define TRB_DEV_NOTE 38
1210/* MFINDEX Wrap Event - microframe counter wrapped */
1211#define TRB_MFINDEX_WRAP 39
1212/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
1213
1214/* Nec vendor-specific command completion event. */
1215#define TRB_NEC_CMD_COMP 48
1216/* Get NEC firmware revision. */
1217#define TRB_NEC_GET_FW 49
1218
1219#define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
1220/* Above, but for __le32 types -- can avoid work by swapping constants: */
1221#define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1222 cpu_to_le32(TRB_TYPE(TRB_LINK)))
1223#define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1224 cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
1225
1226#define NEC_FW_MINOR(p) (((p) >> 0) & 0xff)
1227#define NEC_FW_MAJOR(p) (((p) >> 8) & 0xff)
1228
1229/*
1230 * TRBS_PER_SEGMENT must be a multiple of 4,
1231 * since the command ring is 64-byte aligned.
1232 * It must also be greater than 16.
1233 */
1234#define TRBS_PER_SEGMENT 64
1235/* Allow two commands + a link TRB, along with any reserved command TRBs */
1236#define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3)
1237#define SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
1238#define SEGMENT_SHIFT (__ffs(SEGMENT_SIZE))
1239/* TRB buffer pointers can't cross 64KB boundaries */
1240#define TRB_MAX_BUFF_SHIFT 16
1241#define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT)
1242
1243struct xhci_segment {
1244 union xhci_trb *trbs;
1245 /* private to HCD */
1246 struct xhci_segment *next;
1247 dma_addr_t dma;
1248};
1249
1250struct xhci_td {
1251 struct list_head td_list;
1252 struct list_head cancelled_td_list;
1253 struct urb *urb;
1254 struct xhci_segment *start_seg;
1255 union xhci_trb *first_trb;
1256 union xhci_trb *last_trb;
1257};
1258
1259/* xHCI command default timeout value */
1260#define XHCI_CMD_DEFAULT_TIMEOUT (5 * HZ)
1261
1262/* command descriptor */
1263struct xhci_cd {
1264 struct list_head cancel_cmd_list;
1265 struct xhci_command *command;
1266 union xhci_trb *cmd_trb;
1267};
1268
1269struct xhci_dequeue_state {
1270 struct xhci_segment *new_deq_seg;
1271 union xhci_trb *new_deq_ptr;
1272 int new_cycle_state;
1273};
1274
1275enum xhci_ring_type {
1276 TYPE_CTRL = 0,
1277 TYPE_ISOC,
1278 TYPE_BULK,
1279 TYPE_INTR,
1280 TYPE_STREAM,
1281 TYPE_COMMAND,
1282 TYPE_EVENT,
1283};
1284
1285struct xhci_ring {
1286 struct xhci_segment *first_seg;
1287 struct xhci_segment *last_seg;
1288 union xhci_trb *enqueue;
1289 struct xhci_segment *enq_seg;
1290 unsigned int enq_updates;
1291 union xhci_trb *dequeue;
1292 struct xhci_segment *deq_seg;
1293 unsigned int deq_updates;
1294 struct list_head td_list;
1295 /*
1296 * Write the cycle state into the TRB cycle field to give ownership of
1297 * the TRB to the host controller (if we are the producer), or to check
1298 * if we own the TRB (if we are the consumer). See section 4.9.1.
1299 */
1300 u32 cycle_state;
1301 unsigned int stream_id;
1302 unsigned int num_segs;
1303 unsigned int num_trbs_free;
1304 unsigned int num_trbs_free_temp;
1305 enum xhci_ring_type type;
1306 bool last_td_was_short;
1307};
1308
1309struct xhci_erst_entry {
1310 /* 64-bit event ring segment address */
1311 __le64 seg_addr;
1312 __le32 seg_size;
1313 /* Set to zero */
1314 __le32 rsvd;
1315};
1316
1317struct xhci_erst {
1318 struct xhci_erst_entry *entries;
1319 unsigned int num_entries;
1320 /* xhci->event_ring keeps track of segment dma addresses */
1321 dma_addr_t erst_dma_addr;
1322 /* Num entries the ERST can contain */
1323 unsigned int erst_size;
1324};
1325
1326struct xhci_scratchpad {
1327 u64 *sp_array;
1328 dma_addr_t sp_dma;
1329 void **sp_buffers;
1330 dma_addr_t *sp_dma_buffers;
1331};
1332
1333struct urb_priv {
1334 int length;
1335 int td_cnt;
1336 struct xhci_td *td[0];
1337};
1338
1339/*
1340 * Each segment table entry is 4*32bits long. 1K seems like an ok size:
1341 * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
1342 * meaning 64 ring segments.
1343 * Initial allocated size of the ERST, in number of entries */
1344#define ERST_NUM_SEGS 1
1345/* Initial allocated size of the ERST, in number of entries */
1346#define ERST_SIZE 64
1347/* Initial number of event segment rings allocated */
1348#define ERST_ENTRIES 1
1349/* Poll every 60 seconds */
1350#define POLL_TIMEOUT 60
1351/* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
1352#define XHCI_STOP_EP_CMD_TIMEOUT 5
1353/* XXX: Make these module parameters */
1354
1355struct s3_save {
1356 u32 command;
1357 u32 dev_nt;
1358 u64 dcbaa_ptr;
1359 u32 config_reg;
1360 u32 irq_pending;
1361 u32 irq_control;
1362 u32 erst_size;
1363 u64 erst_base;
1364 u64 erst_dequeue;
1365};
1366
1367/* Use for lpm */
1368struct dev_info {
1369 u32 dev_id;
1370 struct list_head list;
1371};
1372
1373struct xhci_bus_state {
1374 unsigned long bus_suspended;
1375 unsigned long next_statechange;
1376
1377 /* Port suspend arrays are indexed by the portnum of the fake roothub */
1378 /* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
1379 u32 port_c_suspend;
1380 u32 suspended_ports;
1381 u32 port_remote_wakeup;
1382 unsigned long resume_done[USB_MAXCHILDREN];
1383 /* which ports have started to resume */
1384 unsigned long resuming_ports;
1385};
1386
1387static inline unsigned int hcd_index(struct usb_hcd *hcd)
1388{
1389 if (hcd->speed == HCD_USB3)
1390 return 0;
1391 else
1392 return 1;
1393}
1394
1395/* There is one xhci_hcd structure per controller */
1396struct xhci_hcd {
1397 struct usb_hcd *main_hcd;
1398 struct usb_hcd *shared_hcd;
1399 /* glue to PCI and HCD framework */
1400 struct xhci_cap_regs __iomem *cap_regs;
1401 struct xhci_op_regs __iomem *op_regs;
1402 struct xhci_run_regs __iomem *run_regs;
1403 struct xhci_doorbell_array __iomem *dba;
1404 /* Our HCD's current interrupter register set */
1405 struct xhci_intr_reg __iomem *ir_set;
1406
1407 /* Cached register copies of read-only HC data */
1408 __u32 hcs_params1;
1409 __u32 hcs_params2;
1410 __u32 hcs_params3;
1411 __u32 hcc_params;
1412
1413 spinlock_t lock;
1414
1415 /* packed release number */
1416 u8 sbrn;
1417 u16 hci_version;
1418 u8 max_slots;
1419 u8 max_interrupters;
1420 u8 max_ports;
1421 u8 isoc_threshold;
1422 int event_ring_max;
1423 int addr_64;
1424 /* 4KB min, 128MB max */
1425 int page_size;
1426 /* Valid values are 12 to 20, inclusive */
1427 int page_shift;
1428 /* msi-x vectors */
1429 int msix_count;
1430 struct msix_entry *msix_entries;
1431 /* data structures */
1432 struct xhci_device_context_array *dcbaa;
1433 struct xhci_ring *cmd_ring;
1434 unsigned int cmd_ring_state;
1435#define CMD_RING_STATE_RUNNING (1 << 0)
1436#define CMD_RING_STATE_ABORTED (1 << 1)
1437#define CMD_RING_STATE_STOPPED (1 << 2)
1438 struct list_head cancel_cmd_list;
1439 unsigned int cmd_ring_reserved_trbs;
1440 struct xhci_ring *event_ring;
1441 struct xhci_erst erst;
1442 /* Scratchpad */
1443 struct xhci_scratchpad *scratchpad;
1444 /* Store LPM test failed devices' information */
1445 struct list_head lpm_failed_devs;
1446
1447 /* slot enabling and address device helpers */
1448 struct completion addr_dev;
1449 int slot_id;
1450 /* For USB 3.0 LPM enable/disable. */
1451 struct xhci_command *lpm_command;
1452 /* Internal mirror of the HW's dcbaa */
1453 struct xhci_virt_device *devs[MAX_HC_SLOTS];
1454 /* For keeping track of bandwidth domains per roothub. */
1455 struct xhci_root_port_bw_info *rh_bw;
1456
1457 /* DMA pools */
1458 struct dma_pool *device_pool;
1459 struct dma_pool *segment_pool;
1460 struct dma_pool *small_streams_pool;
1461 struct dma_pool *medium_streams_pool;
1462
1463#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
1464 /* Poll the rings - for debugging */
1465 struct timer_list event_ring_timer;
1466 int zombie;
1467#endif
1468 /* Host controller watchdog timer structures */
1469 unsigned int xhc_state;
1470
1471 u32 command;
1472 struct s3_save s3;
1473/* Host controller is dying - not responding to commands. "I'm not dead yet!"
1474 *
1475 * xHC interrupts have been disabled and a watchdog timer will (or has already)
1476 * halt the xHCI host, and complete all URBs with an -ESHUTDOWN code. Any code
1477 * that sees this status (other than the timer that set it) should stop touching
1478 * hardware immediately. Interrupt handlers should return immediately when
1479 * they see this status (any time they drop and re-acquire xhci->lock).
1480 * xhci_urb_dequeue() should call usb_hcd_check_unlink_urb() and return without
1481 * putting the TD on the canceled list, etc.
1482 *
1483 * There are no reports of xHCI host controllers that display this issue.
1484 */
1485#define XHCI_STATE_DYING (1 << 0)
1486#define XHCI_STATE_HALTED (1 << 1)
1487 /* Statistics */
1488 int error_bitmask;
1489 unsigned int quirks;
1490#define XHCI_LINK_TRB_QUIRK (1 << 0)
1491#define XHCI_RESET_EP_QUIRK (1 << 1)
1492#define XHCI_NEC_HOST (1 << 2)
1493#define XHCI_AMD_PLL_FIX (1 << 3)
1494#define XHCI_SPURIOUS_SUCCESS (1 << 4)
1495/*
1496 * Certain Intel host controllers have a limit to the number of endpoint
1497 * contexts they can handle. Ideally, they would signal that they can't handle
1498 * anymore endpoint contexts by returning a Resource Error for the Configure
1499 * Endpoint command, but they don't. Instead they expect software to keep track
1500 * of the number of active endpoints for them, across configure endpoint
1501 * commands, reset device commands, disable slot commands, and address device
1502 * commands.
1503 */
1504#define XHCI_EP_LIMIT_QUIRK (1 << 5)
1505#define XHCI_BROKEN_MSI (1 << 6)
1506#define XHCI_RESET_ON_RESUME (1 << 7)
1507#define XHCI_SW_BW_CHECKING (1 << 8)
1508#define XHCI_AMD_0x96_HOST (1 << 9)
1509#define XHCI_TRUST_TX_LENGTH (1 << 10)
1510#define XHCI_LPM_SUPPORT (1 << 11)
1511#define XHCI_INTEL_HOST (1 << 12)
1512#define XHCI_SPURIOUS_REBOOT (1 << 13)
1513#define XHCI_COMP_MODE_QUIRK (1 << 14)
1514#define XHCI_AVOID_BEI (1 << 15)
1515 unsigned int num_active_eps;
1516 unsigned int limit_active_eps;
1517 /* There are two roothubs to keep track of bus suspend info for */
1518 struct xhci_bus_state bus_state[2];
1519 /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
1520 u8 *port_array;
1521 /* Array of pointers to USB 3.0 PORTSC registers */
1522 __le32 __iomem **usb3_ports;
1523 unsigned int num_usb3_ports;
1524 /* Array of pointers to USB 2.0 PORTSC registers */
1525 __le32 __iomem **usb2_ports;
1526 unsigned int num_usb2_ports;
1527 /* support xHCI 0.96 spec USB2 software LPM */
1528 unsigned sw_lpm_support:1;
1529 /* support xHCI 1.0 spec USB2 hardware LPM */
1530 unsigned hw_lpm_support:1;
1531 /* Compliance Mode Recovery Data */
1532 struct timer_list comp_mode_recovery_timer;
1533 u32 port_status_u0;
1534/* Compliance Mode Timer Triggered every 2 seconds */
1535#define COMP_MODE_RCVRY_MSECS 2000
1536};
1537
1538/* convert between an HCD pointer and the corresponding EHCI_HCD */
1539static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
1540{
1541 return *((struct xhci_hcd **) (hcd->hcd_priv));
1542}
1543
1544static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
1545{
1546 return xhci->main_hcd;
1547}
1548
1549#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
1550#define XHCI_DEBUG 1
1551#else
1552#define XHCI_DEBUG 0
1553#endif
1554
1555#define xhci_dbg(xhci, fmt, args...) \
1556 do { if (XHCI_DEBUG) dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
1557#define xhci_info(xhci, fmt, args...) \
1558 do { if (XHCI_DEBUG) dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
1559#define xhci_err(xhci, fmt, args...) \
1560 dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1561#define xhci_warn(xhci, fmt, args...) \
1562 dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1563
1564/* TODO: copied from ehci.h - can be refactored? */
1565/* xHCI spec says all registers are little endian */
1566static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
1567 __le32 __iomem *regs)
1568{
1569 return readl(regs);
1570}
1571static inline void xhci_writel(struct xhci_hcd *xhci,
1572 const unsigned int val, __le32 __iomem *regs)
1573{
1574 writel(val, regs);
1575}
1576
1577/*
1578 * Registers should always be accessed with double word or quad word accesses.
1579 *
1580 * Some xHCI implementations may support 64-bit address pointers. Registers
1581 * with 64-bit address pointers should be written to with dword accesses by
1582 * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
1583 * xHCI implementations that do not support 64-bit address pointers will ignore
1584 * the high dword, and write order is irrelevant.
1585 */
1586static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
1587 __le64 __iomem *regs)
1588{
1589 __u32 __iomem *ptr = (__u32 __iomem *) regs;
1590 u64 val_lo = readl(ptr);
1591 u64 val_hi = readl(ptr + 1);
1592 return val_lo + (val_hi << 32);
1593}
1594static inline void xhci_write_64(struct xhci_hcd *xhci,
1595 const u64 val, __le64 __iomem *regs)
1596{
1597 __u32 __iomem *ptr = (__u32 __iomem *) regs;
1598 u32 val_lo = lower_32_bits(val);
1599 u32 val_hi = upper_32_bits(val);
1600
1601 writel(val_lo, ptr);
1602 writel(val_hi, ptr + 1);
1603}
1604
1605static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
1606{
1607 return xhci->quirks & XHCI_LINK_TRB_QUIRK;
1608}
1609
1610/* xHCI debugging */
1611void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num);
1612void xhci_print_registers(struct xhci_hcd *xhci);
1613void xhci_dbg_regs(struct xhci_hcd *xhci);
1614void xhci_print_run_regs(struct xhci_hcd *xhci);
1615void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb);
1616void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb);
1617void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg);
1618void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
1619void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
1620void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
1621void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
1622void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
1623char *xhci_get_slot_state(struct xhci_hcd *xhci,
1624 struct xhci_container_ctx *ctx);
1625void xhci_dbg_ep_rings(struct xhci_hcd *xhci,
1626 unsigned int slot_id, unsigned int ep_index,
1627 struct xhci_virt_ep *ep);
1628
1629/* xHCI memory management */
1630void xhci_mem_cleanup(struct xhci_hcd *xhci);
1631int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
1632void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
1633int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
1634int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
1635void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
1636 struct usb_device *udev);
1637unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
1638unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
1639unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
1640unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
1641void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
1642void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci,
1643 struct xhci_bw_info *ep_bw,
1644 struct xhci_interval_bw_table *bw_table,
1645 struct usb_device *udev,
1646 struct xhci_virt_ep *virt_ep,
1647 struct xhci_tt_bw_info *tt_info);
1648void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
1649 struct xhci_virt_device *virt_dev,
1650 int old_active_eps);
1651void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info);
1652void xhci_update_bw_info(struct xhci_hcd *xhci,
1653 struct xhci_container_ctx *in_ctx,
1654 struct xhci_input_control_ctx *ctrl_ctx,
1655 struct xhci_virt_device *virt_dev);
1656void xhci_endpoint_copy(struct xhci_hcd *xhci,
1657 struct xhci_container_ctx *in_ctx,
1658 struct xhci_container_ctx *out_ctx,
1659 unsigned int ep_index);
1660void xhci_slot_copy(struct xhci_hcd *xhci,
1661 struct xhci_container_ctx *in_ctx,
1662 struct xhci_container_ctx *out_ctx);
1663int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
1664 struct usb_device *udev, struct usb_host_endpoint *ep,
1665 gfp_t mem_flags);
1666void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
1667int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
1668 unsigned int num_trbs, gfp_t flags);
1669void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
1670 struct xhci_virt_device *virt_dev,
1671 unsigned int ep_index);
1672struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
1673 unsigned int num_stream_ctxs,
1674 unsigned int num_streams, gfp_t flags);
1675void xhci_free_stream_info(struct xhci_hcd *xhci,
1676 struct xhci_stream_info *stream_info);
1677void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
1678 struct xhci_ep_ctx *ep_ctx,
1679 struct xhci_stream_info *stream_info);
1680void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
1681 struct xhci_ep_ctx *ep_ctx,
1682 struct xhci_virt_ep *ep);
1683void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
1684 struct xhci_virt_device *virt_dev, bool drop_control_ep);
1685struct xhci_ring *xhci_dma_to_transfer_ring(
1686 struct xhci_virt_ep *ep,
1687 u64 address);
1688struct xhci_ring *xhci_stream_id_to_ring(
1689 struct xhci_virt_device *dev,
1690 unsigned int ep_index,
1691 unsigned int stream_id);
1692struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
1693 bool allocate_in_ctx, bool allocate_completion,
1694 gfp_t mem_flags);
1695void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
1696void xhci_free_command(struct xhci_hcd *xhci,
1697 struct xhci_command *command);
1698
1699#ifdef CONFIG_PCI
1700/* xHCI PCI glue */
1701int xhci_register_pci(void);
1702void xhci_unregister_pci(void);
1703#else
1704static inline int xhci_register_pci(void) { return 0; }
1705static inline void xhci_unregister_pci(void) {}
1706#endif
1707
1708#if defined(CONFIG_USB_XHCI_PLATFORM) \
1709 || defined(CONFIG_USB_XHCI_PLATFORM_MODULE)
1710int xhci_register_plat(void);
1711void xhci_unregister_plat(void);
1712#else
1713static inline int xhci_register_plat(void)
1714{ return 0; }
1715static inline void xhci_unregister_plat(void)
1716{ }
1717#endif
1718
1719/* xHCI host controller glue */
1720typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
1721int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
1722 u32 mask, u32 done, int usec);
1723void xhci_quiesce(struct xhci_hcd *xhci);
1724int xhci_halt(struct xhci_hcd *xhci);
1725int xhci_reset(struct xhci_hcd *xhci);
1726int xhci_init(struct usb_hcd *hcd);
1727int xhci_run(struct usb_hcd *hcd);
1728void xhci_stop(struct usb_hcd *hcd);
1729void xhci_shutdown(struct usb_hcd *hcd);
1730int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
1731
1732#ifdef CONFIG_PM
1733int xhci_suspend(struct xhci_hcd *xhci);
1734int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
1735#else
1736#define xhci_suspend NULL
1737#define xhci_resume NULL
1738#endif
1739
1740int xhci_get_frame(struct usb_hcd *hcd);
1741irqreturn_t xhci_irq(struct usb_hcd *hcd);
1742irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd);
1743int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
1744void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
1745int xhci_alloc_tt_info(struct xhci_hcd *xhci,
1746 struct xhci_virt_device *virt_dev,
1747 struct usb_device *hdev,
1748 struct usb_tt *tt, gfp_t mem_flags);
1749int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
1750 struct usb_host_endpoint **eps, unsigned int num_eps,
1751 unsigned int num_streams, gfp_t mem_flags);
1752int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
1753 struct usb_host_endpoint **eps, unsigned int num_eps,
1754 gfp_t mem_flags);
1755int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
1756int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev);
1757int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
1758 struct usb_device *udev, int enable);
1759int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
1760 struct usb_tt *tt, gfp_t mem_flags);
1761int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
1762int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
1763int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
1764int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
1765void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
1766int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev);
1767int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
1768void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
1769
1770/* xHCI ring, segment, TRB, and TD functions */
1771dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
1772struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
1773 union xhci_trb *start_trb, union xhci_trb *end_trb,
1774 dma_addr_t suspect_dma);
1775int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
1776void xhci_ring_cmd_db(struct xhci_hcd *xhci);
1777int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
1778int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
1779 u32 slot_id);
1780int xhci_queue_vendor_command(struct xhci_hcd *xhci,
1781 u32 field1, u32 field2, u32 field3, u32 field4);
1782int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
1783 unsigned int ep_index, int suspend);
1784int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
1785 int slot_id, unsigned int ep_index);
1786int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
1787 int slot_id, unsigned int ep_index);
1788int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
1789 int slot_id, unsigned int ep_index);
1790int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
1791 struct urb *urb, int slot_id, unsigned int ep_index);
1792int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
1793 u32 slot_id, bool command_must_succeed);
1794int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
1795 u32 slot_id, bool command_must_succeed);
1796int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
1797 unsigned int ep_index);
1798int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id);
1799void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
1800 unsigned int slot_id, unsigned int ep_index,
1801 unsigned int stream_id, struct xhci_td *cur_td,
1802 struct xhci_dequeue_state *state);
1803void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
1804 unsigned int slot_id, unsigned int ep_index,
1805 unsigned int stream_id,
1806 struct xhci_dequeue_state *deq_state);
1807void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
1808 struct usb_device *udev, unsigned int ep_index);
1809void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
1810 unsigned int slot_id, unsigned int ep_index,
1811 struct xhci_dequeue_state *deq_state);
1812void xhci_stop_endpoint_command_watchdog(unsigned long arg);
1813int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
1814 union xhci_trb *cmd_trb);
1815void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
1816 unsigned int ep_index, unsigned int stream_id);
1817
1818/* xHCI roothub code */
1819void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
1820 int port_id, u32 link_state);
1821int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
1822 struct usb_device *udev, enum usb3_link_state state);
1823int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
1824 struct usb_device *udev, enum usb3_link_state state);
1825void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
1826 int port_id, u32 port_bit);
1827int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
1828 char *buf, u16 wLength);
1829int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
1830
1831#ifdef CONFIG_PM
1832int xhci_bus_suspend(struct usb_hcd *hcd);
1833int xhci_bus_resume(struct usb_hcd *hcd);
1834#else
1835#define xhci_bus_suspend NULL
1836#define xhci_bus_resume NULL
1837#endif /* CONFIG_PM */
1838
1839u32 xhci_port_state_to_neutral(u32 state);
1840int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
1841 u16 port);
1842void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
1843
1844/* xHCI contexts */
1845struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
1846struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
1847struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
1848
1849#endif /* __LINUX_XHCI_HCD_H */