Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Driver for the Intel SCU IPC mechanism
4 *
5 * (C) Copyright 2008-2010,2015 Intel Corporation
6 * Author: Sreedhara DS (sreedhara.ds@intel.com)
7 *
8 * SCU running in ARC processor communicates with other entity running in IA
9 * core through IPC mechanism which in turn messaging between IA core ad SCU.
10 * SCU has two IPC mechanism IPC-1 and IPC-2. IPC-1 is used between IA32 and
11 * SCU where IPC-2 is used between P-Unit and SCU. This driver delas with
12 * IPC-1 Driver provides an API for power control unit registers (e.g. MSIC)
13 * along with other APIs.
14 */
15
16#include <linux/delay.h>
17#include <linux/device.h>
18#include <linux/errno.h>
19#include <linux/init.h>
20#include <linux/interrupt.h>
21#include <linux/io.h>
22#include <linux/module.h>
23#include <linux/slab.h>
24
25#include <asm/intel_scu_ipc.h>
26
27/* IPC defines the following message types */
28#define IPCMSG_PCNTRL 0xff /* Power controller unit read/write */
29
30/* Command id associated with message IPCMSG_PCNTRL */
31#define IPC_CMD_PCNTRL_W 0 /* Register write */
32#define IPC_CMD_PCNTRL_R 1 /* Register read */
33#define IPC_CMD_PCNTRL_M 2 /* Register read-modify-write */
34
35/*
36 * IPC register summary
37 *
38 * IPC register blocks are memory mapped at fixed address of PCI BAR 0.
39 * To read or write information to the SCU, driver writes to IPC-1 memory
40 * mapped registers. The following is the IPC mechanism
41 *
42 * 1. IA core cDMI interface claims this transaction and converts it to a
43 * Transaction Layer Packet (TLP) message which is sent across the cDMI.
44 *
45 * 2. South Complex cDMI block receives this message and writes it to
46 * the IPC-1 register block, causing an interrupt to the SCU
47 *
48 * 3. SCU firmware decodes this interrupt and IPC message and the appropriate
49 * message handler is called within firmware.
50 */
51
52#define IPC_WWBUF_SIZE 20 /* IPC Write buffer Size */
53#define IPC_RWBUF_SIZE 20 /* IPC Read buffer Size */
54#define IPC_IOC 0x100 /* IPC command register IOC bit */
55
56struct intel_scu_ipc_dev {
57 struct device dev;
58 struct resource mem;
59 struct module *owner;
60 int irq;
61 void __iomem *ipc_base;
62 struct completion cmd_complete;
63};
64
65#define IPC_STATUS 0x04
66#define IPC_STATUS_IRQ BIT(2)
67#define IPC_STATUS_ERR BIT(1)
68#define IPC_STATUS_BUSY BIT(0)
69
70/*
71 * IPC Write/Read Buffers:
72 * 16 byte buffer for sending and receiving data to and from SCU.
73 */
74#define IPC_WRITE_BUFFER 0x80
75#define IPC_READ_BUFFER 0x90
76
77/* Timeout in jiffies */
78#define IPC_TIMEOUT (10 * HZ)
79
80static struct intel_scu_ipc_dev *ipcdev; /* Only one for now */
81static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */
82
83static struct class intel_scu_ipc_class = {
84 .name = "intel_scu_ipc",
85 .owner = THIS_MODULE,
86};
87
88/**
89 * intel_scu_ipc_dev_get() - Get SCU IPC instance
90 *
91 * The recommended new API takes SCU IPC instance as parameter and this
92 * function can be called by driver to get the instance. This also makes
93 * sure the driver providing the IPC functionality cannot be unloaded
94 * while the caller has the instance.
95 *
96 * Call intel_scu_ipc_dev_put() to release the instance.
97 *
98 * Returns %NULL if SCU IPC is not currently available.
99 */
100struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void)
101{
102 struct intel_scu_ipc_dev *scu = NULL;
103
104 mutex_lock(&ipclock);
105 if (ipcdev) {
106 get_device(&ipcdev->dev);
107 /*
108 * Prevent the IPC provider from being unloaded while it
109 * is being used.
110 */
111 if (!try_module_get(ipcdev->owner))
112 put_device(&ipcdev->dev);
113 else
114 scu = ipcdev;
115 }
116
117 mutex_unlock(&ipclock);
118 return scu;
119}
120EXPORT_SYMBOL_GPL(intel_scu_ipc_dev_get);
121
122/**
123 * intel_scu_ipc_dev_put() - Put SCU IPC instance
124 * @scu: SCU IPC instance
125 *
126 * This function releases the SCU IPC instance retrieved from
127 * intel_scu_ipc_dev_get() and allows the driver providing IPC to be
128 * unloaded.
129 */
130void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu)
131{
132 if (scu) {
133 module_put(scu->owner);
134 put_device(&scu->dev);
135 }
136}
137EXPORT_SYMBOL_GPL(intel_scu_ipc_dev_put);
138
139struct intel_scu_ipc_devres {
140 struct intel_scu_ipc_dev *scu;
141};
142
143static void devm_intel_scu_ipc_dev_release(struct device *dev, void *res)
144{
145 struct intel_scu_ipc_devres *dr = res;
146 struct intel_scu_ipc_dev *scu = dr->scu;
147
148 intel_scu_ipc_dev_put(scu);
149}
150
151/**
152 * devm_intel_scu_ipc_dev_get() - Allocate managed SCU IPC device
153 * @dev: Device requesting the SCU IPC device
154 *
155 * The recommended new API takes SCU IPC instance as parameter and this
156 * function can be called by driver to get the instance. This also makes
157 * sure the driver providing the IPC functionality cannot be unloaded
158 * while the caller has the instance.
159 *
160 * Returns %NULL if SCU IPC is not currently available.
161 */
162struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev)
163{
164 struct intel_scu_ipc_devres *dr;
165 struct intel_scu_ipc_dev *scu;
166
167 dr = devres_alloc(devm_intel_scu_ipc_dev_release, sizeof(*dr), GFP_KERNEL);
168 if (!dr)
169 return NULL;
170
171 scu = intel_scu_ipc_dev_get();
172 if (!scu) {
173 devres_free(dr);
174 return NULL;
175 }
176
177 dr->scu = scu;
178 devres_add(dev, dr);
179
180 return scu;
181}
182EXPORT_SYMBOL_GPL(devm_intel_scu_ipc_dev_get);
183
184/*
185 * Send ipc command
186 * Command Register (Write Only):
187 * A write to this register results in an interrupt to the SCU core processor
188 * Format:
189 * |rfu2(8) | size(8) | command id(4) | rfu1(3) | ioc(1) | command(8)|
190 */
191static inline void ipc_command(struct intel_scu_ipc_dev *scu, u32 cmd)
192{
193 reinit_completion(&scu->cmd_complete);
194 writel(cmd | IPC_IOC, scu->ipc_base);
195}
196
197/*
198 * Write ipc data
199 * IPC Write Buffer (Write Only):
200 * 16-byte buffer for sending data associated with IPC command to
201 * SCU. Size of the data is specified in the IPC_COMMAND_REG register
202 */
203static inline void ipc_data_writel(struct intel_scu_ipc_dev *scu, u32 data, u32 offset)
204{
205 writel(data, scu->ipc_base + IPC_WRITE_BUFFER + offset);
206}
207
208/*
209 * Status Register (Read Only):
210 * Driver will read this register to get the ready/busy status of the IPC
211 * block and error status of the IPC command that was just processed by SCU
212 * Format:
213 * |rfu3(8)|error code(8)|initiator id(8)|cmd id(4)|rfu1(2)|error(1)|busy(1)|
214 */
215static inline u8 ipc_read_status(struct intel_scu_ipc_dev *scu)
216{
217 return __raw_readl(scu->ipc_base + IPC_STATUS);
218}
219
220/* Read ipc byte data */
221static inline u8 ipc_data_readb(struct intel_scu_ipc_dev *scu, u32 offset)
222{
223 return readb(scu->ipc_base + IPC_READ_BUFFER + offset);
224}
225
226/* Read ipc u32 data */
227static inline u32 ipc_data_readl(struct intel_scu_ipc_dev *scu, u32 offset)
228{
229 return readl(scu->ipc_base + IPC_READ_BUFFER + offset);
230}
231
232/* Wait till scu status is busy */
233static inline int busy_loop(struct intel_scu_ipc_dev *scu)
234{
235 unsigned long end = jiffies + IPC_TIMEOUT;
236
237 do {
238 u32 status;
239
240 status = ipc_read_status(scu);
241 if (!(status & IPC_STATUS_BUSY))
242 return (status & IPC_STATUS_ERR) ? -EIO : 0;
243
244 usleep_range(50, 100);
245 } while (time_before(jiffies, end));
246
247 return -ETIMEDOUT;
248}
249
250/* Wait till ipc ioc interrupt is received or timeout in 10 HZ */
251static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
252{
253 int status;
254
255 if (!wait_for_completion_timeout(&scu->cmd_complete, IPC_TIMEOUT))
256 return -ETIMEDOUT;
257
258 status = ipc_read_status(scu);
259 if (status & IPC_STATUS_ERR)
260 return -EIO;
261
262 return 0;
263}
264
265static int intel_scu_ipc_check_status(struct intel_scu_ipc_dev *scu)
266{
267 return scu->irq > 0 ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
268}
269
270/* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
271static int pwr_reg_rdwr(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
272 u32 count, u32 op, u32 id)
273{
274 int nc;
275 u32 offset = 0;
276 int err;
277 u8 cbuf[IPC_WWBUF_SIZE];
278 u32 *wbuf = (u32 *)&cbuf;
279
280 memset(cbuf, 0, sizeof(cbuf));
281
282 mutex_lock(&ipclock);
283 if (!scu)
284 scu = ipcdev;
285 if (!scu) {
286 mutex_unlock(&ipclock);
287 return -ENODEV;
288 }
289
290 for (nc = 0; nc < count; nc++, offset += 2) {
291 cbuf[offset] = addr[nc];
292 cbuf[offset + 1] = addr[nc] >> 8;
293 }
294
295 if (id == IPC_CMD_PCNTRL_R) {
296 for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
297 ipc_data_writel(scu, wbuf[nc], offset);
298 ipc_command(scu, (count * 2) << 16 | id << 12 | 0 << 8 | op);
299 } else if (id == IPC_CMD_PCNTRL_W) {
300 for (nc = 0; nc < count; nc++, offset += 1)
301 cbuf[offset] = data[nc];
302 for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
303 ipc_data_writel(scu, wbuf[nc], offset);
304 ipc_command(scu, (count * 3) << 16 | id << 12 | 0 << 8 | op);
305 } else if (id == IPC_CMD_PCNTRL_M) {
306 cbuf[offset] = data[0];
307 cbuf[offset + 1] = data[1];
308 ipc_data_writel(scu, wbuf[0], 0); /* Write wbuff */
309 ipc_command(scu, 4 << 16 | id << 12 | 0 << 8 | op);
310 }
311
312 err = intel_scu_ipc_check_status(scu);
313 if (!err && id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
314 /* Workaround: values are read as 0 without memcpy_fromio */
315 memcpy_fromio(cbuf, scu->ipc_base + 0x90, 16);
316 for (nc = 0; nc < count; nc++)
317 data[nc] = ipc_data_readb(scu, nc);
318 }
319 mutex_unlock(&ipclock);
320 return err;
321}
322
323/**
324 * intel_scu_ipc_dev_ioread8() - Read a byte via the SCU
325 * @scu: Optional SCU IPC instance
326 * @addr: Register on SCU
327 * @data: Return pointer for read byte
328 *
329 * Read a single register. Returns %0 on success or an error code. All
330 * locking between SCU accesses is handled for the caller.
331 *
332 * This function may sleep.
333 */
334int intel_scu_ipc_dev_ioread8(struct intel_scu_ipc_dev *scu, u16 addr, u8 *data)
335{
336 return pwr_reg_rdwr(scu, &addr, data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
337}
338EXPORT_SYMBOL(intel_scu_ipc_dev_ioread8);
339
340/**
341 * intel_scu_ipc_dev_iowrite8() - Write a byte via the SCU
342 * @scu: Optional SCU IPC instance
343 * @addr: Register on SCU
344 * @data: Byte to write
345 *
346 * Write a single register. Returns %0 on success or an error code. All
347 * locking between SCU accesses is handled for the caller.
348 *
349 * This function may sleep.
350 */
351int intel_scu_ipc_dev_iowrite8(struct intel_scu_ipc_dev *scu, u16 addr, u8 data)
352{
353 return pwr_reg_rdwr(scu, &addr, &data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
354}
355EXPORT_SYMBOL(intel_scu_ipc_dev_iowrite8);
356
357/**
358 * intel_scu_ipc_dev_readv() - Read a set of registers
359 * @scu: Optional SCU IPC instance
360 * @addr: Register list
361 * @data: Bytes to return
362 * @len: Length of array
363 *
364 * Read registers. Returns %0 on success or an error code. All locking
365 * between SCU accesses is handled for the caller.
366 *
367 * The largest array length permitted by the hardware is 5 items.
368 *
369 * This function may sleep.
370 */
371int intel_scu_ipc_dev_readv(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
372 size_t len)
373{
374 return pwr_reg_rdwr(scu, addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
375}
376EXPORT_SYMBOL(intel_scu_ipc_dev_readv);
377
378/**
379 * intel_scu_ipc_dev_writev() - Write a set of registers
380 * @scu: Optional SCU IPC instance
381 * @addr: Register list
382 * @data: Bytes to write
383 * @len: Length of array
384 *
385 * Write registers. Returns %0 on success or an error code. All locking
386 * between SCU accesses is handled for the caller.
387 *
388 * The largest array length permitted by the hardware is 5 items.
389 *
390 * This function may sleep.
391 */
392int intel_scu_ipc_dev_writev(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
393 size_t len)
394{
395 return pwr_reg_rdwr(scu, addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
396}
397EXPORT_SYMBOL(intel_scu_ipc_dev_writev);
398
399/**
400 * intel_scu_ipc_dev_update() - Update a register
401 * @scu: Optional SCU IPC instance
402 * @addr: Register address
403 * @data: Bits to update
404 * @mask: Mask of bits to update
405 *
406 * Read-modify-write power control unit register. The first data argument
407 * must be register value and second is mask value mask is a bitmap that
408 * indicates which bits to update. %0 = masked. Don't modify this bit, %1 =
409 * modify this bit. returns %0 on success or an error code.
410 *
411 * This function may sleep. Locking between SCU accesses is handled
412 * for the caller.
413 */
414int intel_scu_ipc_dev_update(struct intel_scu_ipc_dev *scu, u16 addr, u8 data,
415 u8 mask)
416{
417 u8 tmp[2] = { data, mask };
418 return pwr_reg_rdwr(scu, &addr, tmp, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_M);
419}
420EXPORT_SYMBOL(intel_scu_ipc_dev_update);
421
422/**
423 * intel_scu_ipc_dev_simple_command() - Send a simple command
424 * @scu: Optional SCU IPC instance
425 * @cmd: Command
426 * @sub: Sub type
427 *
428 * Issue a simple command to the SCU. Do not use this interface if you must
429 * then access data as any data values may be overwritten by another SCU
430 * access by the time this function returns.
431 *
432 * This function may sleep. Locking for SCU accesses is handled for the
433 * caller.
434 */
435int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd,
436 int sub)
437{
438 u32 cmdval;
439 int err;
440
441 mutex_lock(&ipclock);
442 if (!scu)
443 scu = ipcdev;
444 if (!scu) {
445 mutex_unlock(&ipclock);
446 return -ENODEV;
447 }
448 scu = ipcdev;
449 cmdval = sub << 12 | cmd;
450 ipc_command(scu, cmdval);
451 err = intel_scu_ipc_check_status(scu);
452 mutex_unlock(&ipclock);
453 if (err)
454 dev_err(&scu->dev, "IPC command %#x failed with %d\n", cmdval, err);
455 return err;
456}
457EXPORT_SYMBOL(intel_scu_ipc_dev_simple_command);
458
459/**
460 * intel_scu_ipc_dev_command_with_size() - Command with data
461 * @scu: Optional SCU IPC instance
462 * @cmd: Command
463 * @sub: Sub type
464 * @in: Input data
465 * @inlen: Input length in bytes
466 * @size: Input size written to the IPC command register in whatever
467 * units (dword, byte) the particular firmware requires. Normally
468 * should be the same as @inlen.
469 * @out: Output data
470 * @outlen: Output length in bytes
471 *
472 * Issue a command to the SCU which involves data transfers. Do the
473 * data copies under the lock but leave it for the caller to interpret.
474 */
475int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd,
476 int sub, const void *in, size_t inlen,
477 size_t size, void *out, size_t outlen)
478{
479 size_t outbuflen = DIV_ROUND_UP(outlen, sizeof(u32));
480 size_t inbuflen = DIV_ROUND_UP(inlen, sizeof(u32));
481 u32 cmdval, inbuf[4] = {};
482 int i, err;
483
484 if (inbuflen > 4 || outbuflen > 4)
485 return -EINVAL;
486
487 mutex_lock(&ipclock);
488 if (!scu)
489 scu = ipcdev;
490 if (!scu) {
491 mutex_unlock(&ipclock);
492 return -ENODEV;
493 }
494
495 memcpy(inbuf, in, inlen);
496 for (i = 0; i < inbuflen; i++)
497 ipc_data_writel(scu, inbuf[i], 4 * i);
498
499 cmdval = (size << 16) | (sub << 12) | cmd;
500 ipc_command(scu, cmdval);
501 err = intel_scu_ipc_check_status(scu);
502
503 if (!err) {
504 u32 outbuf[4] = {};
505
506 for (i = 0; i < outbuflen; i++)
507 outbuf[i] = ipc_data_readl(scu, 4 * i);
508
509 memcpy(out, outbuf, outlen);
510 }
511
512 mutex_unlock(&ipclock);
513 if (err)
514 dev_err(&scu->dev, "IPC command %#x failed with %d\n", cmdval, err);
515 return err;
516}
517EXPORT_SYMBOL(intel_scu_ipc_dev_command_with_size);
518
519/*
520 * Interrupt handler gets called when ioc bit of IPC_COMMAND_REG set to 1
521 * When ioc bit is set to 1, caller api must wait for interrupt handler called
522 * which in turn unlocks the caller api. Currently this is not used
523 *
524 * This is edge triggered so we need take no action to clear anything
525 */
526static irqreturn_t ioc(int irq, void *dev_id)
527{
528 struct intel_scu_ipc_dev *scu = dev_id;
529 int status = ipc_read_status(scu);
530
531 writel(status | IPC_STATUS_IRQ, scu->ipc_base + IPC_STATUS);
532 complete(&scu->cmd_complete);
533
534 return IRQ_HANDLED;
535}
536
537static void intel_scu_ipc_release(struct device *dev)
538{
539 struct intel_scu_ipc_dev *scu;
540
541 scu = container_of(dev, struct intel_scu_ipc_dev, dev);
542 if (scu->irq > 0)
543 free_irq(scu->irq, scu);
544 iounmap(scu->ipc_base);
545 release_mem_region(scu->mem.start, resource_size(&scu->mem));
546 kfree(scu);
547}
548
549/**
550 * __intel_scu_ipc_register() - Register SCU IPC device
551 * @parent: Parent device
552 * @scu_data: Data used to configure SCU IPC
553 * @owner: Module registering the SCU IPC device
554 *
555 * Call this function to register SCU IPC mechanism under @parent.
556 * Returns pointer to the new SCU IPC device or ERR_PTR() in case of
557 * failure. The caller may use the returned instance if it needs to do
558 * SCU IPC calls itself.
559 */
560struct intel_scu_ipc_dev *
561__intel_scu_ipc_register(struct device *parent,
562 const struct intel_scu_ipc_data *scu_data,
563 struct module *owner)
564{
565 int err;
566 struct intel_scu_ipc_dev *scu;
567 void __iomem *ipc_base;
568
569 mutex_lock(&ipclock);
570 /* We support only one IPC */
571 if (ipcdev) {
572 err = -EBUSY;
573 goto err_unlock;
574 }
575
576 scu = kzalloc(sizeof(*scu), GFP_KERNEL);
577 if (!scu) {
578 err = -ENOMEM;
579 goto err_unlock;
580 }
581
582 scu->owner = owner;
583 scu->dev.parent = parent;
584 scu->dev.class = &intel_scu_ipc_class;
585 scu->dev.release = intel_scu_ipc_release;
586
587 if (!request_mem_region(scu_data->mem.start, resource_size(&scu_data->mem),
588 "intel_scu_ipc")) {
589 err = -EBUSY;
590 goto err_free;
591 }
592
593 ipc_base = ioremap(scu_data->mem.start, resource_size(&scu_data->mem));
594 if (!ipc_base) {
595 err = -ENOMEM;
596 goto err_release;
597 }
598
599 scu->ipc_base = ipc_base;
600 scu->mem = scu_data->mem;
601 scu->irq = scu_data->irq;
602 init_completion(&scu->cmd_complete);
603
604 if (scu->irq > 0) {
605 err = request_irq(scu->irq, ioc, 0, "intel_scu_ipc", scu);
606 if (err)
607 goto err_unmap;
608 }
609
610 /*
611 * After this point intel_scu_ipc_release() takes care of
612 * releasing the SCU IPC resources once refcount drops to zero.
613 */
614 dev_set_name(&scu->dev, "intel_scu_ipc");
615 err = device_register(&scu->dev);
616 if (err) {
617 put_device(&scu->dev);
618 goto err_unlock;
619 }
620
621 /* Assign device at last */
622 ipcdev = scu;
623 mutex_unlock(&ipclock);
624
625 return scu;
626
627err_unmap:
628 iounmap(ipc_base);
629err_release:
630 release_mem_region(scu_data->mem.start, resource_size(&scu_data->mem));
631err_free:
632 kfree(scu);
633err_unlock:
634 mutex_unlock(&ipclock);
635
636 return ERR_PTR(err);
637}
638EXPORT_SYMBOL_GPL(__intel_scu_ipc_register);
639
640/**
641 * intel_scu_ipc_unregister() - Unregister SCU IPC
642 * @scu: SCU IPC handle
643 *
644 * This unregisters the SCU IPC device and releases the acquired
645 * resources once the refcount goes to zero.
646 */
647void intel_scu_ipc_unregister(struct intel_scu_ipc_dev *scu)
648{
649 mutex_lock(&ipclock);
650 if (!WARN_ON(!ipcdev)) {
651 ipcdev = NULL;
652 device_unregister(&scu->dev);
653 }
654 mutex_unlock(&ipclock);
655}
656EXPORT_SYMBOL_GPL(intel_scu_ipc_unregister);
657
658static void devm_intel_scu_ipc_unregister(struct device *dev, void *res)
659{
660 struct intel_scu_ipc_devres *dr = res;
661 struct intel_scu_ipc_dev *scu = dr->scu;
662
663 intel_scu_ipc_unregister(scu);
664}
665
666/**
667 * __devm_intel_scu_ipc_register() - Register managed SCU IPC device
668 * @parent: Parent device
669 * @scu_data: Data used to configure SCU IPC
670 * @owner: Module registering the SCU IPC device
671 *
672 * Call this function to register managed SCU IPC mechanism under
673 * @parent. Returns pointer to the new SCU IPC device or ERR_PTR() in
674 * case of failure. The caller may use the returned instance if it needs
675 * to do SCU IPC calls itself.
676 */
677struct intel_scu_ipc_dev *
678__devm_intel_scu_ipc_register(struct device *parent,
679 const struct intel_scu_ipc_data *scu_data,
680 struct module *owner)
681{
682 struct intel_scu_ipc_devres *dr;
683 struct intel_scu_ipc_dev *scu;
684
685 dr = devres_alloc(devm_intel_scu_ipc_unregister, sizeof(*dr), GFP_KERNEL);
686 if (!dr)
687 return NULL;
688
689 scu = __intel_scu_ipc_register(parent, scu_data, owner);
690 if (IS_ERR(scu)) {
691 devres_free(dr);
692 return scu;
693 }
694
695 dr->scu = scu;
696 devres_add(parent, dr);
697
698 return scu;
699}
700EXPORT_SYMBOL_GPL(__devm_intel_scu_ipc_register);
701
702static int __init intel_scu_ipc_init(void)
703{
704 return class_register(&intel_scu_ipc_class);
705}
706subsys_initcall(intel_scu_ipc_init);
707
708static void __exit intel_scu_ipc_exit(void)
709{
710 class_unregister(&intel_scu_ipc_class);
711}
712module_exit(intel_scu_ipc_exit);
1/*
2 * intel_scu_ipc.c: Driver for the Intel SCU IPC mechanism
3 *
4 * (C) Copyright 2008-2010 Intel Corporation
5 * Author: Sreedhara DS (sreedhara.ds@intel.com)
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; version 2
10 * of the License.
11 *
12 * SCU running in ARC processor communicates with other entity running in IA
13 * core through IPC mechanism which in turn messaging between IA core ad SCU.
14 * SCU has two IPC mechanism IPC-1 and IPC-2. IPC-1 is used between IA32 and
15 * SCU where IPC-2 is used between P-Unit and SCU. This driver delas with
16 * IPC-1 Driver provides an API for power control unit registers (e.g. MSIC)
17 * along with other APIs.
18 */
19#include <linux/delay.h>
20#include <linux/errno.h>
21#include <linux/init.h>
22#include <linux/device.h>
23#include <linux/pm.h>
24#include <linux/pci.h>
25#include <linux/interrupt.h>
26#include <linux/sfi.h>
27#include <linux/module.h>
28#include <asm/mrst.h>
29#include <asm/intel_scu_ipc.h>
30
31/* IPC defines the following message types */
32#define IPCMSG_WATCHDOG_TIMER 0xF8 /* Set Kernel Watchdog Threshold */
33#define IPCMSG_BATTERY 0xEF /* Coulomb Counter Accumulator */
34#define IPCMSG_FW_UPDATE 0xFE /* Firmware update */
35#define IPCMSG_PCNTRL 0xFF /* Power controller unit read/write */
36#define IPCMSG_FW_REVISION 0xF4 /* Get firmware revision */
37
38/* Command id associated with message IPCMSG_PCNTRL */
39#define IPC_CMD_PCNTRL_W 0 /* Register write */
40#define IPC_CMD_PCNTRL_R 1 /* Register read */
41#define IPC_CMD_PCNTRL_M 2 /* Register read-modify-write */
42
43/*
44 * IPC register summary
45 *
46 * IPC register blocks are memory mapped at fixed address of 0xFF11C000
47 * To read or write information to the SCU, driver writes to IPC-1 memory
48 * mapped registers (base address 0xFF11C000). The following is the IPC
49 * mechanism
50 *
51 * 1. IA core cDMI interface claims this transaction and converts it to a
52 * Transaction Layer Packet (TLP) message which is sent across the cDMI.
53 *
54 * 2. South Complex cDMI block receives this message and writes it to
55 * the IPC-1 register block, causing an interrupt to the SCU
56 *
57 * 3. SCU firmware decodes this interrupt and IPC message and the appropriate
58 * message handler is called within firmware.
59 */
60
61#define IPC_BASE_ADDR 0xFF11C000 /* IPC1 base register address */
62#define IPC_MAX_ADDR 0x100 /* Maximum IPC regisers */
63#define IPC_WWBUF_SIZE 20 /* IPC Write buffer Size */
64#define IPC_RWBUF_SIZE 20 /* IPC Read buffer Size */
65#define IPC_I2C_BASE 0xFF12B000 /* I2C control register base address */
66#define IPC_I2C_MAX_ADDR 0x10 /* Maximum I2C regisers */
67
68static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id);
69static void ipc_remove(struct pci_dev *pdev);
70
71struct intel_scu_ipc_dev {
72 struct pci_dev *pdev;
73 void __iomem *ipc_base;
74 void __iomem *i2c_base;
75};
76
77static struct intel_scu_ipc_dev ipcdev; /* Only one for now */
78
79static int platform; /* Platform type */
80
81/*
82 * IPC Read Buffer (Read Only):
83 * 16 byte buffer for receiving data from SCU, if IPC command
84 * processing results in response data
85 */
86#define IPC_READ_BUFFER 0x90
87
88#define IPC_I2C_CNTRL_ADDR 0
89#define I2C_DATA_ADDR 0x04
90
91static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */
92
93/*
94 * Command Register (Write Only):
95 * A write to this register results in an interrupt to the SCU core processor
96 * Format:
97 * |rfu2(8) | size(8) | command id(4) | rfu1(3) | ioc(1) | command(8)|
98 */
99static inline void ipc_command(u32 cmd) /* Send ipc command */
100{
101 writel(cmd, ipcdev.ipc_base);
102}
103
104/*
105 * IPC Write Buffer (Write Only):
106 * 16-byte buffer for sending data associated with IPC command to
107 * SCU. Size of the data is specified in the IPC_COMMAND_REG register
108 */
109static inline void ipc_data_writel(u32 data, u32 offset) /* Write ipc data */
110{
111 writel(data, ipcdev.ipc_base + 0x80 + offset);
112}
113
114/*
115 * Status Register (Read Only):
116 * Driver will read this register to get the ready/busy status of the IPC
117 * block and error status of the IPC command that was just processed by SCU
118 * Format:
119 * |rfu3(8)|error code(8)|initiator id(8)|cmd id(4)|rfu1(2)|error(1)|busy(1)|
120 */
121
122static inline u8 ipc_read_status(void)
123{
124 return __raw_readl(ipcdev.ipc_base + 0x04);
125}
126
127static inline u8 ipc_data_readb(u32 offset) /* Read ipc byte data */
128{
129 return readb(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
130}
131
132static inline u32 ipc_data_readl(u32 offset) /* Read ipc u32 data */
133{
134 return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
135}
136
137static inline int busy_loop(void) /* Wait till scu status is busy */
138{
139 u32 status = 0;
140 u32 loop_count = 0;
141
142 status = ipc_read_status();
143 while (status & 1) {
144 udelay(1); /* scu processing time is in few u secods */
145 status = ipc_read_status();
146 loop_count++;
147 /* break if scu doesn't reset busy bit after huge retry */
148 if (loop_count > 100000) {
149 dev_err(&ipcdev.pdev->dev, "IPC timed out");
150 return -ETIMEDOUT;
151 }
152 }
153 if ((status >> 1) & 1)
154 return -EIO;
155
156 return 0;
157}
158
159/* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
160static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
161{
162 int nc;
163 u32 offset = 0;
164 int err;
165 u8 cbuf[IPC_WWBUF_SIZE] = { };
166 u32 *wbuf = (u32 *)&cbuf;
167
168 mutex_lock(&ipclock);
169
170 memset(cbuf, 0, sizeof(cbuf));
171
172 if (ipcdev.pdev == NULL) {
173 mutex_unlock(&ipclock);
174 return -ENODEV;
175 }
176
177 for (nc = 0; nc < count; nc++, offset += 2) {
178 cbuf[offset] = addr[nc];
179 cbuf[offset + 1] = addr[nc] >> 8;
180 }
181
182 if (id == IPC_CMD_PCNTRL_R) {
183 for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
184 ipc_data_writel(wbuf[nc], offset);
185 ipc_command((count*2) << 16 | id << 12 | 0 << 8 | op);
186 } else if (id == IPC_CMD_PCNTRL_W) {
187 for (nc = 0; nc < count; nc++, offset += 1)
188 cbuf[offset] = data[nc];
189 for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
190 ipc_data_writel(wbuf[nc], offset);
191 ipc_command((count*3) << 16 | id << 12 | 0 << 8 | op);
192 } else if (id == IPC_CMD_PCNTRL_M) {
193 cbuf[offset] = data[0];
194 cbuf[offset + 1] = data[1];
195 ipc_data_writel(wbuf[0], 0); /* Write wbuff */
196 ipc_command(4 << 16 | id << 12 | 0 << 8 | op);
197 }
198
199 err = busy_loop();
200 if (id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
201 /* Workaround: values are read as 0 without memcpy_fromio */
202 memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16);
203 for (nc = 0; nc < count; nc++)
204 data[nc] = ipc_data_readb(nc);
205 }
206 mutex_unlock(&ipclock);
207 return err;
208}
209
210/**
211 * intel_scu_ipc_ioread8 - read a word via the SCU
212 * @addr: register on SCU
213 * @data: return pointer for read byte
214 *
215 * Read a single register. Returns 0 on success or an error code. All
216 * locking between SCU accesses is handled for the caller.
217 *
218 * This function may sleep.
219 */
220int intel_scu_ipc_ioread8(u16 addr, u8 *data)
221{
222 return pwr_reg_rdwr(&addr, data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
223}
224EXPORT_SYMBOL(intel_scu_ipc_ioread8);
225
226/**
227 * intel_scu_ipc_ioread16 - read a word via the SCU
228 * @addr: register on SCU
229 * @data: return pointer for read word
230 *
231 * Read a register pair. Returns 0 on success or an error code. All
232 * locking between SCU accesses is handled for the caller.
233 *
234 * This function may sleep.
235 */
236int intel_scu_ipc_ioread16(u16 addr, u16 *data)
237{
238 u16 x[2] = {addr, addr + 1 };
239 return pwr_reg_rdwr(x, (u8 *)data, 2, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
240}
241EXPORT_SYMBOL(intel_scu_ipc_ioread16);
242
243/**
244 * intel_scu_ipc_ioread32 - read a dword via the SCU
245 * @addr: register on SCU
246 * @data: return pointer for read dword
247 *
248 * Read four registers. Returns 0 on success or an error code. All
249 * locking between SCU accesses is handled for the caller.
250 *
251 * This function may sleep.
252 */
253int intel_scu_ipc_ioread32(u16 addr, u32 *data)
254{
255 u16 x[4] = {addr, addr + 1, addr + 2, addr + 3};
256 return pwr_reg_rdwr(x, (u8 *)data, 4, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
257}
258EXPORT_SYMBOL(intel_scu_ipc_ioread32);
259
260/**
261 * intel_scu_ipc_iowrite8 - write a byte via the SCU
262 * @addr: register on SCU
263 * @data: byte to write
264 *
265 * Write a single register. Returns 0 on success or an error code. All
266 * locking between SCU accesses is handled for the caller.
267 *
268 * This function may sleep.
269 */
270int intel_scu_ipc_iowrite8(u16 addr, u8 data)
271{
272 return pwr_reg_rdwr(&addr, &data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
273}
274EXPORT_SYMBOL(intel_scu_ipc_iowrite8);
275
276/**
277 * intel_scu_ipc_iowrite16 - write a word via the SCU
278 * @addr: register on SCU
279 * @data: word to write
280 *
281 * Write two registers. Returns 0 on success or an error code. All
282 * locking between SCU accesses is handled for the caller.
283 *
284 * This function may sleep.
285 */
286int intel_scu_ipc_iowrite16(u16 addr, u16 data)
287{
288 u16 x[2] = {addr, addr + 1 };
289 return pwr_reg_rdwr(x, (u8 *)&data, 2, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
290}
291EXPORT_SYMBOL(intel_scu_ipc_iowrite16);
292
293/**
294 * intel_scu_ipc_iowrite32 - write a dword via the SCU
295 * @addr: register on SCU
296 * @data: dword to write
297 *
298 * Write four registers. Returns 0 on success or an error code. All
299 * locking between SCU accesses is handled for the caller.
300 *
301 * This function may sleep.
302 */
303int intel_scu_ipc_iowrite32(u16 addr, u32 data)
304{
305 u16 x[4] = {addr, addr + 1, addr + 2, addr + 3};
306 return pwr_reg_rdwr(x, (u8 *)&data, 4, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
307}
308EXPORT_SYMBOL(intel_scu_ipc_iowrite32);
309
310/**
311 * intel_scu_ipc_readvv - read a set of registers
312 * @addr: register list
313 * @data: bytes to return
314 * @len: length of array
315 *
316 * Read registers. Returns 0 on success or an error code. All
317 * locking between SCU accesses is handled for the caller.
318 *
319 * The largest array length permitted by the hardware is 5 items.
320 *
321 * This function may sleep.
322 */
323int intel_scu_ipc_readv(u16 *addr, u8 *data, int len)
324{
325 return pwr_reg_rdwr(addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
326}
327EXPORT_SYMBOL(intel_scu_ipc_readv);
328
329/**
330 * intel_scu_ipc_writev - write a set of registers
331 * @addr: register list
332 * @data: bytes to write
333 * @len: length of array
334 *
335 * Write registers. Returns 0 on success or an error code. All
336 * locking between SCU accesses is handled for the caller.
337 *
338 * The largest array length permitted by the hardware is 5 items.
339 *
340 * This function may sleep.
341 *
342 */
343int intel_scu_ipc_writev(u16 *addr, u8 *data, int len)
344{
345 return pwr_reg_rdwr(addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
346}
347EXPORT_SYMBOL(intel_scu_ipc_writev);
348
349
350/**
351 * intel_scu_ipc_update_register - r/m/w a register
352 * @addr: register address
353 * @bits: bits to update
354 * @mask: mask of bits to update
355 *
356 * Read-modify-write power control unit register. The first data argument
357 * must be register value and second is mask value
358 * mask is a bitmap that indicates which bits to update.
359 * 0 = masked. Don't modify this bit, 1 = modify this bit.
360 * returns 0 on success or an error code.
361 *
362 * This function may sleep. Locking between SCU accesses is handled
363 * for the caller.
364 */
365int intel_scu_ipc_update_register(u16 addr, u8 bits, u8 mask)
366{
367 u8 data[2] = { bits, mask };
368 return pwr_reg_rdwr(&addr, data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_M);
369}
370EXPORT_SYMBOL(intel_scu_ipc_update_register);
371
372/**
373 * intel_scu_ipc_simple_command - send a simple command
374 * @cmd: command
375 * @sub: sub type
376 *
377 * Issue a simple command to the SCU. Do not use this interface if
378 * you must then access data as any data values may be overwritten
379 * by another SCU access by the time this function returns.
380 *
381 * This function may sleep. Locking for SCU accesses is handled for
382 * the caller.
383 */
384int intel_scu_ipc_simple_command(int cmd, int sub)
385{
386 int err;
387
388 mutex_lock(&ipclock);
389 if (ipcdev.pdev == NULL) {
390 mutex_unlock(&ipclock);
391 return -ENODEV;
392 }
393 ipc_command(sub << 12 | cmd);
394 err = busy_loop();
395 mutex_unlock(&ipclock);
396 return err;
397}
398EXPORT_SYMBOL(intel_scu_ipc_simple_command);
399
400/**
401 * intel_scu_ipc_command - command with data
402 * @cmd: command
403 * @sub: sub type
404 * @in: input data
405 * @inlen: input length in dwords
406 * @out: output data
407 * @outlein: output length in dwords
408 *
409 * Issue a command to the SCU which involves data transfers. Do the
410 * data copies under the lock but leave it for the caller to interpret
411 */
412
413int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
414 u32 *out, int outlen)
415{
416 int i, err;
417
418 mutex_lock(&ipclock);
419 if (ipcdev.pdev == NULL) {
420 mutex_unlock(&ipclock);
421 return -ENODEV;
422 }
423
424 for (i = 0; i < inlen; i++)
425 ipc_data_writel(*in++, 4 * i);
426
427 ipc_command((inlen << 16) | (sub << 12) | cmd);
428 err = busy_loop();
429
430 for (i = 0; i < outlen; i++)
431 *out++ = ipc_data_readl(4 * i);
432
433 mutex_unlock(&ipclock);
434 return err;
435}
436EXPORT_SYMBOL(intel_scu_ipc_command);
437
438/*I2C commands */
439#define IPC_I2C_WRITE 1 /* I2C Write command */
440#define IPC_I2C_READ 2 /* I2C Read command */
441
442/**
443 * intel_scu_ipc_i2c_cntrl - I2C read/write operations
444 * @addr: I2C address + command bits
445 * @data: data to read/write
446 *
447 * Perform an an I2C read/write operation via the SCU. All locking is
448 * handled for the caller. This function may sleep.
449 *
450 * Returns an error code or 0 on success.
451 *
452 * This has to be in the IPC driver for the locking.
453 */
454int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data)
455{
456 u32 cmd = 0;
457
458 mutex_lock(&ipclock);
459 if (ipcdev.pdev == NULL) {
460 mutex_unlock(&ipclock);
461 return -ENODEV;
462 }
463 cmd = (addr >> 24) & 0xFF;
464 if (cmd == IPC_I2C_READ) {
465 writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
466 /* Write not getting updated without delay */
467 mdelay(1);
468 *data = readl(ipcdev.i2c_base + I2C_DATA_ADDR);
469 } else if (cmd == IPC_I2C_WRITE) {
470 writel(*data, ipcdev.i2c_base + I2C_DATA_ADDR);
471 mdelay(1);
472 writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
473 } else {
474 dev_err(&ipcdev.pdev->dev,
475 "intel_scu_ipc: I2C INVALID_CMD = 0x%x\n", cmd);
476
477 mutex_unlock(&ipclock);
478 return -EIO;
479 }
480 mutex_unlock(&ipclock);
481 return 0;
482}
483EXPORT_SYMBOL(intel_scu_ipc_i2c_cntrl);
484
485/*
486 * Interrupt handler gets called when ioc bit of IPC_COMMAND_REG set to 1
487 * When ioc bit is set to 1, caller api must wait for interrupt handler called
488 * which in turn unlocks the caller api. Currently this is not used
489 *
490 * This is edge triggered so we need take no action to clear anything
491 */
492static irqreturn_t ioc(int irq, void *dev_id)
493{
494 return IRQ_HANDLED;
495}
496
497/**
498 * ipc_probe - probe an Intel SCU IPC
499 * @dev: the PCI device matching
500 * @id: entry in the match table
501 *
502 * Enable and install an intel SCU IPC. This appears in the PCI space
503 * but uses some hard coded addresses as well.
504 */
505static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
506{
507 int err;
508 resource_size_t pci_resource;
509
510 if (ipcdev.pdev) /* We support only one SCU */
511 return -EBUSY;
512
513 ipcdev.pdev = pci_dev_get(dev);
514
515 err = pci_enable_device(dev);
516 if (err)
517 return err;
518
519 err = pci_request_regions(dev, "intel_scu_ipc");
520 if (err)
521 return err;
522
523 pci_resource = pci_resource_start(dev, 0);
524 if (!pci_resource)
525 return -ENOMEM;
526
527 if (request_irq(dev->irq, ioc, 0, "intel_scu_ipc", &ipcdev))
528 return -EBUSY;
529
530 ipcdev.ipc_base = ioremap_nocache(IPC_BASE_ADDR, IPC_MAX_ADDR);
531 if (!ipcdev.ipc_base)
532 return -ENOMEM;
533
534 ipcdev.i2c_base = ioremap_nocache(IPC_I2C_BASE, IPC_I2C_MAX_ADDR);
535 if (!ipcdev.i2c_base) {
536 iounmap(ipcdev.ipc_base);
537 return -ENOMEM;
538 }
539
540 intel_scu_devices_create();
541
542 return 0;
543}
544
545/**
546 * ipc_remove - remove a bound IPC device
547 * @pdev: PCI device
548 *
549 * In practice the SCU is not removable but this function is also
550 * called for each device on a module unload or cleanup which is the
551 * path that will get used.
552 *
553 * Free up the mappings and release the PCI resources
554 */
555static void ipc_remove(struct pci_dev *pdev)
556{
557 free_irq(pdev->irq, &ipcdev);
558 pci_release_regions(pdev);
559 pci_dev_put(ipcdev.pdev);
560 iounmap(ipcdev.ipc_base);
561 iounmap(ipcdev.i2c_base);
562 ipcdev.pdev = NULL;
563 intel_scu_devices_destroy();
564}
565
566static DEFINE_PCI_DEVICE_TABLE(pci_ids) = {
567 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x082a)},
568 { 0,}
569};
570MODULE_DEVICE_TABLE(pci, pci_ids);
571
572static struct pci_driver ipc_driver = {
573 .name = "intel_scu_ipc",
574 .id_table = pci_ids,
575 .probe = ipc_probe,
576 .remove = ipc_remove,
577};
578
579
580static int __init intel_scu_ipc_init(void)
581{
582 platform = mrst_identify_cpu();
583 if (platform == 0)
584 return -ENODEV;
585 return pci_register_driver(&ipc_driver);
586}
587
588static void __exit intel_scu_ipc_exit(void)
589{
590 pci_unregister_driver(&ipc_driver);
591}
592
593MODULE_AUTHOR("Sreedhara DS <sreedhara.ds@intel.com>");
594MODULE_DESCRIPTION("Intel SCU IPC driver");
595MODULE_LICENSE("GPL");
596
597module_init(intel_scu_ipc_init);
598module_exit(intel_scu_ipc_exit);