Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 *
4 * Broadcom Blutonium firmware driver
5 *
6 * Copyright (C) 2003 Maxim Krasnyansky <maxk@qualcomm.com>
7 * Copyright (C) 2003 Marcel Holtmann <marcel@holtmann.org>
8 */
9
10#include <linux/module.h>
11
12#include <linux/kernel.h>
13#include <linux/init.h>
14#include <linux/slab.h>
15#include <linux/types.h>
16#include <linux/errno.h>
17
18#include <linux/device.h>
19#include <linux/firmware.h>
20
21#include <linux/usb.h>
22
23#include <net/bluetooth/bluetooth.h>
24
25#define VERSION "1.2"
26
27static const struct usb_device_id bcm203x_table[] = {
28 /* Broadcom Blutonium (BCM2033) */
29 { USB_DEVICE(0x0a5c, 0x2033) },
30
31 { } /* Terminating entry */
32};
33
34MODULE_DEVICE_TABLE(usb, bcm203x_table);
35
36#define BCM203X_ERROR 0
37#define BCM203X_RESET 1
38#define BCM203X_LOAD_MINIDRV 2
39#define BCM203X_SELECT_MEMORY 3
40#define BCM203X_CHECK_MEMORY 4
41#define BCM203X_LOAD_FIRMWARE 5
42#define BCM203X_CHECK_FIRMWARE 6
43
44#define BCM203X_IN_EP 0x81
45#define BCM203X_OUT_EP 0x02
46
47struct bcm203x_data {
48 struct usb_device *udev;
49
50 unsigned long state;
51
52 struct work_struct work;
53 atomic_t shutdown;
54
55 struct urb *urb;
56 unsigned char *buffer;
57
58 unsigned char *fw_data;
59 unsigned int fw_size;
60 unsigned int fw_sent;
61};
62
63static void bcm203x_complete(struct urb *urb)
64{
65 struct bcm203x_data *data = urb->context;
66 struct usb_device *udev = urb->dev;
67 int len;
68
69 BT_DBG("udev %p urb %p", udev, urb);
70
71 if (urb->status) {
72 BT_ERR("URB failed with status %d", urb->status);
73 data->state = BCM203X_ERROR;
74 return;
75 }
76
77 switch (data->state) {
78 case BCM203X_LOAD_MINIDRV:
79 memcpy(data->buffer, "#", 1);
80
81 usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
82 data->buffer, 1, bcm203x_complete, data);
83
84 data->state = BCM203X_SELECT_MEMORY;
85
86 /* use workqueue to have a small delay */
87 schedule_work(&data->work);
88 break;
89
90 case BCM203X_SELECT_MEMORY:
91 usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
92 data->buffer, 32, bcm203x_complete, data, 1);
93
94 data->state = BCM203X_CHECK_MEMORY;
95
96 if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
97 BT_ERR("Can't submit URB");
98 break;
99
100 case BCM203X_CHECK_MEMORY:
101 if (data->buffer[0] != '#') {
102 BT_ERR("Memory select failed");
103 data->state = BCM203X_ERROR;
104 break;
105 }
106
107 data->state = BCM203X_LOAD_FIRMWARE;
108 fallthrough;
109 case BCM203X_LOAD_FIRMWARE:
110 if (data->fw_sent == data->fw_size) {
111 usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
112 data->buffer, 32, bcm203x_complete, data, 1);
113
114 data->state = BCM203X_CHECK_FIRMWARE;
115 } else {
116 len = min_t(uint, data->fw_size - data->fw_sent, 4096);
117
118 usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
119 data->fw_data + data->fw_sent, len, bcm203x_complete, data);
120
121 data->fw_sent += len;
122 }
123
124 if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
125 BT_ERR("Can't submit URB");
126 break;
127
128 case BCM203X_CHECK_FIRMWARE:
129 if (data->buffer[0] != '.') {
130 BT_ERR("Firmware loading failed");
131 data->state = BCM203X_ERROR;
132 break;
133 }
134
135 data->state = BCM203X_RESET;
136 break;
137 }
138}
139
140static void bcm203x_work(struct work_struct *work)
141{
142 struct bcm203x_data *data =
143 container_of(work, struct bcm203x_data, work);
144
145 if (atomic_read(&data->shutdown))
146 return;
147
148 if (usb_submit_urb(data->urb, GFP_KERNEL) < 0)
149 BT_ERR("Can't submit URB");
150}
151
152static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id *id)
153{
154 const struct firmware *firmware;
155 struct usb_device *udev = interface_to_usbdev(intf);
156 struct bcm203x_data *data;
157 int size;
158
159 BT_DBG("intf %p id %p", intf, id);
160
161 if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
162 return -ENODEV;
163
164 data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
165 if (!data)
166 return -ENOMEM;
167
168 data->udev = udev;
169 data->state = BCM203X_LOAD_MINIDRV;
170
171 data->urb = usb_alloc_urb(0, GFP_KERNEL);
172 if (!data->urb)
173 return -ENOMEM;
174
175 if (request_firmware(&firmware, "BCM2033-MD.hex", &udev->dev) < 0) {
176 BT_ERR("Mini driver request failed");
177 usb_free_urb(data->urb);
178 return -EIO;
179 }
180
181 BT_DBG("minidrv data %p size %zu", firmware->data, firmware->size);
182
183 size = max_t(uint, firmware->size, 4096);
184
185 data->buffer = kmalloc(size, GFP_KERNEL);
186 if (!data->buffer) {
187 BT_ERR("Can't allocate memory for mini driver");
188 release_firmware(firmware);
189 usb_free_urb(data->urb);
190 return -ENOMEM;
191 }
192
193 memcpy(data->buffer, firmware->data, firmware->size);
194
195 usb_fill_bulk_urb(data->urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
196 data->buffer, firmware->size, bcm203x_complete, data);
197
198 release_firmware(firmware);
199
200 if (request_firmware(&firmware, "BCM2033-FW.bin", &udev->dev) < 0) {
201 BT_ERR("Firmware request failed");
202 usb_free_urb(data->urb);
203 kfree(data->buffer);
204 return -EIO;
205 }
206
207 BT_DBG("firmware data %p size %zu", firmware->data, firmware->size);
208
209 data->fw_data = kmemdup(firmware->data, firmware->size, GFP_KERNEL);
210 if (!data->fw_data) {
211 BT_ERR("Can't allocate memory for firmware image");
212 release_firmware(firmware);
213 usb_free_urb(data->urb);
214 kfree(data->buffer);
215 return -ENOMEM;
216 }
217
218 data->fw_size = firmware->size;
219 data->fw_sent = 0;
220
221 release_firmware(firmware);
222
223 INIT_WORK(&data->work, bcm203x_work);
224
225 usb_set_intfdata(intf, data);
226
227 /* use workqueue to have a small delay */
228 schedule_work(&data->work);
229
230 return 0;
231}
232
233static void bcm203x_disconnect(struct usb_interface *intf)
234{
235 struct bcm203x_data *data = usb_get_intfdata(intf);
236
237 BT_DBG("intf %p", intf);
238
239 atomic_inc(&data->shutdown);
240 cancel_work_sync(&data->work);
241
242 usb_kill_urb(data->urb);
243
244 usb_set_intfdata(intf, NULL);
245
246 usb_free_urb(data->urb);
247 kfree(data->fw_data);
248 kfree(data->buffer);
249}
250
251static struct usb_driver bcm203x_driver = {
252 .name = "bcm203x",
253 .probe = bcm203x_probe,
254 .disconnect = bcm203x_disconnect,
255 .id_table = bcm203x_table,
256 .disable_hub_initiated_lpm = 1,
257};
258
259module_usb_driver(bcm203x_driver);
260
261MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
262MODULE_DESCRIPTION("Broadcom Blutonium firmware driver ver " VERSION);
263MODULE_VERSION(VERSION);
264MODULE_LICENSE("GPL");
265MODULE_FIRMWARE("BCM2033-MD.hex");
266MODULE_FIRMWARE("BCM2033-FW.bin");
1/*
2 *
3 * Broadcom Blutonium firmware driver
4 *
5 * Copyright (C) 2003 Maxim Krasnyansky <maxk@qualcomm.com>
6 * Copyright (C) 2003 Marcel Holtmann <marcel@holtmann.org>
7 *
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 *
23 */
24
25#include <linux/module.h>
26
27#include <linux/atomic.h>
28#include <linux/kernel.h>
29#include <linux/init.h>
30#include <linux/slab.h>
31#include <linux/types.h>
32#include <linux/errno.h>
33
34#include <linux/device.h>
35#include <linux/firmware.h>
36
37#include <linux/usb.h>
38
39#include <net/bluetooth/bluetooth.h>
40
41#define VERSION "1.2"
42
43static const struct usb_device_id bcm203x_table[] = {
44 /* Broadcom Blutonium (BCM2033) */
45 { USB_DEVICE(0x0a5c, 0x2033) },
46
47 { } /* Terminating entry */
48};
49
50MODULE_DEVICE_TABLE(usb, bcm203x_table);
51
52#define BCM203X_ERROR 0
53#define BCM203X_RESET 1
54#define BCM203X_LOAD_MINIDRV 2
55#define BCM203X_SELECT_MEMORY 3
56#define BCM203X_CHECK_MEMORY 4
57#define BCM203X_LOAD_FIRMWARE 5
58#define BCM203X_CHECK_FIRMWARE 6
59
60#define BCM203X_IN_EP 0x81
61#define BCM203X_OUT_EP 0x02
62
63struct bcm203x_data {
64 struct usb_device *udev;
65
66 unsigned long state;
67
68 struct work_struct work;
69 atomic_t shutdown;
70
71 struct urb *urb;
72 unsigned char *buffer;
73
74 unsigned char *fw_data;
75 unsigned int fw_size;
76 unsigned int fw_sent;
77};
78
79static void bcm203x_complete(struct urb *urb)
80{
81 struct bcm203x_data *data = urb->context;
82 struct usb_device *udev = urb->dev;
83 int len;
84
85 BT_DBG("udev %p urb %p", udev, urb);
86
87 if (urb->status) {
88 BT_ERR("URB failed with status %d", urb->status);
89 data->state = BCM203X_ERROR;
90 return;
91 }
92
93 switch (data->state) {
94 case BCM203X_LOAD_MINIDRV:
95 memcpy(data->buffer, "#", 1);
96
97 usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
98 data->buffer, 1, bcm203x_complete, data);
99
100 data->state = BCM203X_SELECT_MEMORY;
101
102 /* use workqueue to have a small delay */
103 schedule_work(&data->work);
104 break;
105
106 case BCM203X_SELECT_MEMORY:
107 usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
108 data->buffer, 32, bcm203x_complete, data, 1);
109
110 data->state = BCM203X_CHECK_MEMORY;
111
112 if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
113 BT_ERR("Can't submit URB");
114 break;
115
116 case BCM203X_CHECK_MEMORY:
117 if (data->buffer[0] != '#') {
118 BT_ERR("Memory select failed");
119 data->state = BCM203X_ERROR;
120 break;
121 }
122
123 data->state = BCM203X_LOAD_FIRMWARE;
124
125 case BCM203X_LOAD_FIRMWARE:
126 if (data->fw_sent == data->fw_size) {
127 usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
128 data->buffer, 32, bcm203x_complete, data, 1);
129
130 data->state = BCM203X_CHECK_FIRMWARE;
131 } else {
132 len = min_t(uint, data->fw_size - data->fw_sent, 4096);
133
134 usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
135 data->fw_data + data->fw_sent, len, bcm203x_complete, data);
136
137 data->fw_sent += len;
138 }
139
140 if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
141 BT_ERR("Can't submit URB");
142 break;
143
144 case BCM203X_CHECK_FIRMWARE:
145 if (data->buffer[0] != '.') {
146 BT_ERR("Firmware loading failed");
147 data->state = BCM203X_ERROR;
148 break;
149 }
150
151 data->state = BCM203X_RESET;
152 break;
153 }
154}
155
156static void bcm203x_work(struct work_struct *work)
157{
158 struct bcm203x_data *data =
159 container_of(work, struct bcm203x_data, work);
160
161 if (atomic_read(&data->shutdown))
162 return;
163
164 if (usb_submit_urb(data->urb, GFP_KERNEL) < 0)
165 BT_ERR("Can't submit URB");
166}
167
168static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id *id)
169{
170 const struct firmware *firmware;
171 struct usb_device *udev = interface_to_usbdev(intf);
172 struct bcm203x_data *data;
173 int size;
174
175 BT_DBG("intf %p id %p", intf, id);
176
177 if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
178 return -ENODEV;
179
180 data = kzalloc(sizeof(*data), GFP_KERNEL);
181 if (!data) {
182 BT_ERR("Can't allocate memory for data structure");
183 return -ENOMEM;
184 }
185
186 data->udev = udev;
187 data->state = BCM203X_LOAD_MINIDRV;
188
189 data->urb = usb_alloc_urb(0, GFP_KERNEL);
190 if (!data->urb) {
191 BT_ERR("Can't allocate URB");
192 kfree(data);
193 return -ENOMEM;
194 }
195
196 if (request_firmware(&firmware, "BCM2033-MD.hex", &udev->dev) < 0) {
197 BT_ERR("Mini driver request failed");
198 usb_free_urb(data->urb);
199 kfree(data);
200 return -EIO;
201 }
202
203 BT_DBG("minidrv data %p size %zu", firmware->data, firmware->size);
204
205 size = max_t(uint, firmware->size, 4096);
206
207 data->buffer = kmalloc(size, GFP_KERNEL);
208 if (!data->buffer) {
209 BT_ERR("Can't allocate memory for mini driver");
210 release_firmware(firmware);
211 usb_free_urb(data->urb);
212 kfree(data);
213 return -ENOMEM;
214 }
215
216 memcpy(data->buffer, firmware->data, firmware->size);
217
218 usb_fill_bulk_urb(data->urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
219 data->buffer, firmware->size, bcm203x_complete, data);
220
221 release_firmware(firmware);
222
223 if (request_firmware(&firmware, "BCM2033-FW.bin", &udev->dev) < 0) {
224 BT_ERR("Firmware request failed");
225 usb_free_urb(data->urb);
226 kfree(data->buffer);
227 kfree(data);
228 return -EIO;
229 }
230
231 BT_DBG("firmware data %p size %zu", firmware->data, firmware->size);
232
233 data->fw_data = kmemdup(firmware->data, firmware->size, GFP_KERNEL);
234 if (!data->fw_data) {
235 BT_ERR("Can't allocate memory for firmware image");
236 release_firmware(firmware);
237 usb_free_urb(data->urb);
238 kfree(data->buffer);
239 kfree(data);
240 return -ENOMEM;
241 }
242
243 data->fw_size = firmware->size;
244 data->fw_sent = 0;
245
246 release_firmware(firmware);
247
248 INIT_WORK(&data->work, bcm203x_work);
249
250 usb_set_intfdata(intf, data);
251
252 /* use workqueue to have a small delay */
253 schedule_work(&data->work);
254
255 return 0;
256}
257
258static void bcm203x_disconnect(struct usb_interface *intf)
259{
260 struct bcm203x_data *data = usb_get_intfdata(intf);
261
262 BT_DBG("intf %p", intf);
263
264 atomic_inc(&data->shutdown);
265 cancel_work_sync(&data->work);
266
267 usb_kill_urb(data->urb);
268
269 usb_set_intfdata(intf, NULL);
270
271 usb_free_urb(data->urb);
272 kfree(data->fw_data);
273 kfree(data->buffer);
274 kfree(data);
275}
276
277static struct usb_driver bcm203x_driver = {
278 .name = "bcm203x",
279 .probe = bcm203x_probe,
280 .disconnect = bcm203x_disconnect,
281 .id_table = bcm203x_table,
282 .disable_hub_initiated_lpm = 1,
283};
284
285module_usb_driver(bcm203x_driver);
286
287MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
288MODULE_DESCRIPTION("Broadcom Blutonium firmware driver ver " VERSION);
289MODULE_VERSION(VERSION);
290MODULE_LICENSE("GPL");
291MODULE_FIRMWARE("BCM2033-MD.hex");
292MODULE_FIRMWARE("BCM2033-FW.bin");