Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2#ifndef _SCSI_SCSI_DEVICE_H
3#define _SCSI_SCSI_DEVICE_H
4
5#include <linux/list.h>
6#include <linux/spinlock.h>
7#include <linux/workqueue.h>
8#include <linux/blk-mq.h>
9#include <scsi/scsi.h>
10#include <linux/atomic.h>
11#include <linux/sbitmap.h>
12
13struct bsg_device;
14struct device;
15struct request_queue;
16struct scsi_cmnd;
17struct scsi_lun;
18struct scsi_sense_hdr;
19
20typedef __u64 __bitwise blist_flags_t;
21
22#define SCSI_SENSE_BUFFERSIZE 96
23
24struct scsi_mode_data {
25 __u32 length;
26 __u16 block_descriptor_length;
27 __u8 medium_type;
28 __u8 device_specific;
29 __u8 header_length;
30 __u8 longlba:1;
31};
32
33/*
34 * sdev state: If you alter this, you also need to alter scsi_sysfs.c
35 * (for the ascii descriptions) and the state model enforcer:
36 * scsi_lib:scsi_device_set_state().
37 */
38enum scsi_device_state {
39 SDEV_CREATED = 1, /* device created but not added to sysfs
40 * Only internal commands allowed (for inq) */
41 SDEV_RUNNING, /* device properly configured
42 * All commands allowed */
43 SDEV_CANCEL, /* beginning to delete device
44 * Only error handler commands allowed */
45 SDEV_DEL, /* device deleted
46 * no commands allowed */
47 SDEV_QUIESCE, /* Device quiescent. No block commands
48 * will be accepted, only specials (which
49 * originate in the mid-layer) */
50 SDEV_OFFLINE, /* Device offlined (by error handling or
51 * user request */
52 SDEV_TRANSPORT_OFFLINE, /* Offlined by transport class error handler */
53 SDEV_BLOCK, /* Device blocked by scsi lld. No
54 * scsi commands from user or midlayer
55 * should be issued to the scsi
56 * lld. */
57 SDEV_CREATED_BLOCK, /* same as above but for created devices */
58};
59
60enum scsi_scan_mode {
61 SCSI_SCAN_INITIAL = 0,
62 SCSI_SCAN_RESCAN,
63 SCSI_SCAN_MANUAL,
64};
65
66enum scsi_device_event {
67 SDEV_EVT_MEDIA_CHANGE = 1, /* media has changed */
68 SDEV_EVT_INQUIRY_CHANGE_REPORTED, /* 3F 03 UA reported */
69 SDEV_EVT_CAPACITY_CHANGE_REPORTED, /* 2A 09 UA reported */
70 SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED, /* 38 07 UA reported */
71 SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED, /* 2A 01 UA reported */
72 SDEV_EVT_LUN_CHANGE_REPORTED, /* 3F 0E UA reported */
73 SDEV_EVT_ALUA_STATE_CHANGE_REPORTED, /* 2A 06 UA reported */
74 SDEV_EVT_POWER_ON_RESET_OCCURRED, /* 29 00 UA reported */
75
76 SDEV_EVT_FIRST = SDEV_EVT_MEDIA_CHANGE,
77 SDEV_EVT_LAST = SDEV_EVT_POWER_ON_RESET_OCCURRED,
78
79 SDEV_EVT_MAXBITS = SDEV_EVT_LAST + 1
80};
81
82struct scsi_event {
83 enum scsi_device_event evt_type;
84 struct list_head node;
85
86 /* put union of data structures, for non-simple event types,
87 * here
88 */
89};
90
91/**
92 * struct scsi_vpd - SCSI Vital Product Data
93 * @rcu: For kfree_rcu().
94 * @len: Length in bytes of @data.
95 * @data: VPD data as defined in various T10 SCSI standard documents.
96 */
97struct scsi_vpd {
98 struct rcu_head rcu;
99 int len;
100 unsigned char data[];
101};
102
103enum scsi_vpd_parameters {
104 SCSI_VPD_HEADER_SIZE = 4,
105};
106
107struct scsi_device {
108 struct Scsi_Host *host;
109 struct request_queue *request_queue;
110
111 /* the next two are protected by the host->host_lock */
112 struct list_head siblings; /* list of all devices on this host */
113 struct list_head same_target_siblings; /* just the devices sharing same target id */
114
115 struct sbitmap budget_map;
116 atomic_t device_blocked; /* Device returned QUEUE_FULL. */
117
118 atomic_t restarts;
119 spinlock_t list_lock;
120 struct list_head starved_entry;
121 unsigned short queue_depth; /* How deep of a queue we want */
122 unsigned short max_queue_depth; /* max queue depth */
123 unsigned short last_queue_full_depth; /* These two are used by */
124 unsigned short last_queue_full_count; /* scsi_track_queue_full() */
125 unsigned long last_queue_full_time; /* last queue full time */
126 unsigned long queue_ramp_up_period; /* ramp up period in jiffies */
127#define SCSI_DEFAULT_RAMP_UP_PERIOD (120 * HZ)
128
129 unsigned long last_queue_ramp_up; /* last queue ramp up time */
130
131 unsigned int id, channel;
132 u64 lun;
133 unsigned int manufacturer; /* Manufacturer of device, for using
134 * vendor-specific cmd's */
135 unsigned sector_size; /* size in bytes */
136
137 void *hostdata; /* available to low-level driver */
138 unsigned char type;
139 char scsi_level;
140 char inq_periph_qual; /* PQ from INQUIRY data */
141 struct mutex inquiry_mutex;
142 unsigned char inquiry_len; /* valid bytes in 'inquiry' */
143 unsigned char * inquiry; /* INQUIRY response data */
144 const char * vendor; /* [back_compat] point into 'inquiry' ... */
145 const char * model; /* ... after scan; point to static string */
146 const char * rev; /* ... "nullnullnullnull" before scan */
147
148 struct scsi_vpd __rcu *vpd_pg0;
149 struct scsi_vpd __rcu *vpd_pg83;
150 struct scsi_vpd __rcu *vpd_pg80;
151 struct scsi_vpd __rcu *vpd_pg89;
152 struct scsi_vpd __rcu *vpd_pgb0;
153 struct scsi_vpd __rcu *vpd_pgb1;
154 struct scsi_vpd __rcu *vpd_pgb2;
155
156 struct scsi_target *sdev_target;
157
158 blist_flags_t sdev_bflags; /* black/white flags as also found in
159 * scsi_devinfo.[hc]. For now used only to
160 * pass settings from slave_alloc to scsi
161 * core. */
162 unsigned int eh_timeout; /* Error handling timeout */
163 unsigned removable:1;
164 unsigned changed:1; /* Data invalid due to media change */
165 unsigned busy:1; /* Used to prevent races */
166 unsigned lockable:1; /* Able to prevent media removal */
167 unsigned locked:1; /* Media removal disabled */
168 unsigned borken:1; /* Tell the Seagate driver to be
169 * painfully slow on this device */
170 unsigned disconnect:1; /* can disconnect */
171 unsigned soft_reset:1; /* Uses soft reset option */
172 unsigned sdtr:1; /* Device supports SDTR messages */
173 unsigned wdtr:1; /* Device supports WDTR messages */
174 unsigned ppr:1; /* Device supports PPR messages */
175 unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */
176 unsigned simple_tags:1; /* simple queue tag messages are enabled */
177 unsigned was_reset:1; /* There was a bus reset on the bus for
178 * this device */
179 unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
180 * because we did a bus reset. */
181 unsigned use_10_for_rw:1; /* first try 10-byte read / write */
182 unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
183 unsigned set_dbd_for_ms:1; /* Set "DBD" field in mode sense */
184 unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */
185 unsigned no_write_same:1; /* no WRITE SAME command */
186 unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
187 unsigned use_16_for_sync:1; /* Use sync (16) over sync (10) */
188 unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
189 unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
190 unsigned skip_vpd_pages:1; /* do not read VPD pages */
191 unsigned try_vpd_pages:1; /* attempt to read VPD pages */
192 unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
193 unsigned no_start_on_add:1; /* do not issue start on add */
194 unsigned allow_restart:1; /* issue START_UNIT in error handler */
195 unsigned manage_start_stop:1; /* Let HLD (sd) manage start/stop */
196 unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
197 unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
198 unsigned select_no_atn:1;
199 unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */
200 unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */
201 unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */
202 unsigned last_sector_bug:1; /* do not use multisector accesses on
203 SD_LAST_BUGGY_SECTORS */
204 unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
205 unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
206 unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */
207 unsigned security_supported:1; /* Supports Security Protocols */
208 unsigned is_visible:1; /* is the device visible in sysfs */
209 unsigned wce_default_on:1; /* Cache is ON by default */
210 unsigned no_dif:1; /* T10 PI (DIF) should be disabled */
211 unsigned broken_fua:1; /* Don't set FUA bit */
212 unsigned lun_in_cdb:1; /* Store LUN bits in CDB[1] */
213 unsigned unmap_limit_for_ws:1; /* Use the UNMAP limit for WRITE SAME */
214 unsigned rpm_autosuspend:1; /* Enable runtime autosuspend at device
215 * creation time */
216 unsigned ignore_media_change:1; /* Ignore MEDIA CHANGE on resume */
217 unsigned silence_suspend:1; /* Do not print runtime PM related messages */
218
219 unsigned int queue_stopped; /* request queue is quiesced */
220 bool offline_already; /* Device offline message logged */
221
222 atomic_t disk_events_disable_depth; /* disable depth for disk events */
223
224 DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
225 DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */
226 struct list_head event_list; /* asserted events */
227 struct work_struct event_work;
228
229 unsigned int max_device_blocked; /* what device_blocked counts down from */
230#define SCSI_DEFAULT_DEVICE_BLOCKED 3
231
232 atomic_t iorequest_cnt;
233 atomic_t iodone_cnt;
234 atomic_t ioerr_cnt;
235 atomic_t iotmo_cnt;
236
237 struct device sdev_gendev,
238 sdev_dev;
239
240 struct work_struct requeue_work;
241
242 struct scsi_device_handler *handler;
243 void *handler_data;
244
245 size_t dma_drain_len;
246 void *dma_drain_buf;
247
248 unsigned int sg_timeout;
249 unsigned int sg_reserved_size;
250
251 struct bsg_device *bsg_dev;
252 unsigned char access_state;
253 struct mutex state_mutex;
254 enum scsi_device_state sdev_state;
255 struct task_struct *quiesced_by;
256 unsigned long sdev_data[];
257} __attribute__((aligned(sizeof(unsigned long))));
258
259#define to_scsi_device(d) \
260 container_of(d, struct scsi_device, sdev_gendev)
261#define class_to_sdev(d) \
262 container_of(d, struct scsi_device, sdev_dev)
263#define transport_class_to_sdev(class_dev) \
264 to_scsi_device(class_dev->parent)
265
266#define sdev_dbg(sdev, fmt, a...) \
267 dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
268
269/*
270 * like scmd_printk, but the device name is passed in
271 * as a string pointer
272 */
273__printf(4, 5) void
274sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
275 const char *, ...);
276
277#define sdev_printk(l, sdev, fmt, a...) \
278 sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
279
280__printf(3, 4) void
281scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
282
283#define scmd_dbg(scmd, fmt, a...) \
284 do { \
285 struct request *__rq = scsi_cmd_to_rq((scmd)); \
286 \
287 if (__rq->q->disk) \
288 sdev_dbg((scmd)->device, "[%s] " fmt, \
289 __rq->q->disk->disk_name, ##a); \
290 else \
291 sdev_dbg((scmd)->device, fmt, ##a); \
292 } while (0)
293
294enum scsi_target_state {
295 STARGET_CREATED = 1,
296 STARGET_RUNNING,
297 STARGET_REMOVE,
298 STARGET_CREATED_REMOVE,
299 STARGET_DEL,
300};
301
302/*
303 * scsi_target: representation of a scsi target, for now, this is only
304 * used for single_lun devices. If no one has active IO to the target,
305 * starget_sdev_user is NULL, else it points to the active sdev.
306 */
307struct scsi_target {
308 struct scsi_device *starget_sdev_user;
309 struct list_head siblings;
310 struct list_head devices;
311 struct device dev;
312 struct kref reap_ref; /* last put renders target invisible */
313 unsigned int channel;
314 unsigned int id; /* target id ... replace
315 * scsi_device.id eventually */
316 unsigned int create:1; /* signal that it needs to be added */
317 unsigned int single_lun:1; /* Indicates we should only
318 * allow I/O to one of the luns
319 * for the device at a time. */
320 unsigned int pdt_1f_for_no_lun:1; /* PDT = 0x1f
321 * means no lun present. */
322 unsigned int no_report_luns:1; /* Don't use
323 * REPORT LUNS for scanning. */
324 unsigned int expecting_lun_change:1; /* A device has reported
325 * a 3F/0E UA, other devices on
326 * the same target will also. */
327 /* commands actually active on LLD. */
328 atomic_t target_busy;
329 atomic_t target_blocked;
330
331 /*
332 * LLDs should set this in the slave_alloc host template callout.
333 * If set to zero then there is not limit.
334 */
335 unsigned int can_queue;
336 unsigned int max_target_blocked;
337#define SCSI_DEFAULT_TARGET_BLOCKED 3
338
339 char scsi_level;
340 enum scsi_target_state state;
341 void *hostdata; /* available to low-level driver */
342 unsigned long starget_data[]; /* for the transport */
343 /* starget_data must be the last element!!!! */
344} __attribute__((aligned(sizeof(unsigned long))));
345
346#define to_scsi_target(d) container_of(d, struct scsi_target, dev)
347static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
348{
349 return to_scsi_target(sdev->sdev_gendev.parent);
350}
351#define transport_class_to_starget(class_dev) \
352 to_scsi_target(class_dev->parent)
353
354#define starget_printk(prefix, starget, fmt, a...) \
355 dev_printk(prefix, &(starget)->dev, fmt, ##a)
356
357extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
358 uint, uint, u64, void *hostdata);
359extern int scsi_add_device(struct Scsi_Host *host, uint channel,
360 uint target, u64 lun);
361extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
362extern void scsi_remove_device(struct scsi_device *);
363extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
364void scsi_attach_vpd(struct scsi_device *sdev);
365
366extern struct scsi_device *scsi_device_from_queue(struct request_queue *q);
367extern int __must_check scsi_device_get(struct scsi_device *);
368extern void scsi_device_put(struct scsi_device *);
369extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
370 uint, uint, u64);
371extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
372 uint, uint, u64);
373extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
374 u64);
375extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
376 u64);
377extern void starget_for_each_device(struct scsi_target *, void *,
378 void (*fn)(struct scsi_device *, void *));
379extern void __starget_for_each_device(struct scsi_target *, void *,
380 void (*fn)(struct scsi_device *,
381 void *));
382
383/* only exposed to implement shost_for_each_device */
384extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
385 struct scsi_device *);
386
387/**
388 * shost_for_each_device - iterate over all devices of a host
389 * @sdev: the &struct scsi_device to use as a cursor
390 * @shost: the &struct scsi_host to iterate over
391 *
392 * Iterator that returns each device attached to @shost. This loop
393 * takes a reference on each device and releases it at the end. If
394 * you break out of the loop, you must call scsi_device_put(sdev).
395 */
396#define shost_for_each_device(sdev, shost) \
397 for ((sdev) = __scsi_iterate_devices((shost), NULL); \
398 (sdev); \
399 (sdev) = __scsi_iterate_devices((shost), (sdev)))
400
401/**
402 * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
403 * @sdev: the &struct scsi_device to use as a cursor
404 * @shost: the &struct scsi_host to iterate over
405 *
406 * Iterator that returns each device attached to @shost. It does _not_
407 * take a reference on the scsi_device, so the whole loop must be
408 * protected by shost->host_lock.
409 *
410 * Note: The only reason to use this is because you need to access the
411 * device list in interrupt context. Otherwise you really want to use
412 * shost_for_each_device instead.
413 */
414#define __shost_for_each_device(sdev, shost) \
415 list_for_each_entry((sdev), &((shost)->__devices), siblings)
416
417extern int scsi_change_queue_depth(struct scsi_device *, int);
418extern int scsi_track_queue_full(struct scsi_device *, int);
419
420extern int scsi_set_medium_removal(struct scsi_device *, char);
421
422extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
423 unsigned char *buffer, int len, int timeout,
424 int retries, struct scsi_mode_data *data,
425 struct scsi_sense_hdr *);
426extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
427 unsigned char *buffer, int len, int timeout,
428 int retries, struct scsi_mode_data *data,
429 struct scsi_sense_hdr *);
430extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
431 int retries, struct scsi_sense_hdr *sshdr);
432extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
433 int buf_len);
434extern int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
435 unsigned int len, unsigned char opcode);
436extern int scsi_device_set_state(struct scsi_device *sdev,
437 enum scsi_device_state state);
438extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
439 gfp_t gfpflags);
440extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
441extern void sdev_evt_send_simple(struct scsi_device *sdev,
442 enum scsi_device_event evt_type, gfp_t gfpflags);
443extern int scsi_device_quiesce(struct scsi_device *sdev);
444extern void scsi_device_resume(struct scsi_device *sdev);
445extern void scsi_target_quiesce(struct scsi_target *);
446extern void scsi_target_resume(struct scsi_target *);
447extern void scsi_scan_target(struct device *parent, unsigned int channel,
448 unsigned int id, u64 lun,
449 enum scsi_scan_mode rescan);
450extern void scsi_target_reap(struct scsi_target *);
451extern void scsi_target_block(struct device *);
452extern void scsi_target_unblock(struct device *, enum scsi_device_state);
453extern void scsi_remove_target(struct device *);
454extern const char *scsi_device_state_name(enum scsi_device_state);
455extern int scsi_is_sdev_device(const struct device *);
456extern int scsi_is_target_device(const struct device *);
457extern void scsi_sanitize_inquiry_string(unsigned char *s, int len);
458extern int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
459 int data_direction, void *buffer, unsigned bufflen,
460 unsigned char *sense, struct scsi_sense_hdr *sshdr,
461 int timeout, int retries, blk_opf_t flags,
462 req_flags_t rq_flags, int *resid);
463/* Make sure any sense buffer is the correct size. */
464#define scsi_execute(sdev, cmd, data_direction, buffer, bufflen, sense, \
465 sshdr, timeout, retries, flags, rq_flags, resid) \
466({ \
467 BUILD_BUG_ON((sense) != NULL && \
468 sizeof(sense) != SCSI_SENSE_BUFFERSIZE); \
469 __scsi_execute(sdev, cmd, data_direction, buffer, bufflen, \
470 sense, sshdr, timeout, retries, flags, rq_flags, \
471 resid); \
472})
473static inline int scsi_execute_req(struct scsi_device *sdev,
474 const unsigned char *cmd, int data_direction, void *buffer,
475 unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
476 int retries, int *resid)
477{
478 return scsi_execute(sdev, cmd, data_direction, buffer,
479 bufflen, NULL, sshdr, timeout, retries, 0, 0, resid);
480}
481extern void sdev_disable_disk_events(struct scsi_device *sdev);
482extern void sdev_enable_disk_events(struct scsi_device *sdev);
483extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t);
484extern int scsi_vpd_tpg_id(struct scsi_device *, int *);
485
486#ifdef CONFIG_PM
487extern int scsi_autopm_get_device(struct scsi_device *);
488extern void scsi_autopm_put_device(struct scsi_device *);
489#else
490static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
491static inline void scsi_autopm_put_device(struct scsi_device *d) {}
492#endif /* CONFIG_PM */
493
494static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
495{
496 return device_reprobe(&sdev->sdev_gendev);
497}
498
499static inline unsigned int sdev_channel(struct scsi_device *sdev)
500{
501 return sdev->channel;
502}
503
504static inline unsigned int sdev_id(struct scsi_device *sdev)
505{
506 return sdev->id;
507}
508
509#define scmd_id(scmd) sdev_id((scmd)->device)
510#define scmd_channel(scmd) sdev_channel((scmd)->device)
511
512/*
513 * checks for positions of the SCSI state machine
514 */
515static inline int scsi_device_online(struct scsi_device *sdev)
516{
517 return (sdev->sdev_state != SDEV_OFFLINE &&
518 sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
519 sdev->sdev_state != SDEV_DEL);
520}
521static inline int scsi_device_blocked(struct scsi_device *sdev)
522{
523 return sdev->sdev_state == SDEV_BLOCK ||
524 sdev->sdev_state == SDEV_CREATED_BLOCK;
525}
526static inline int scsi_device_created(struct scsi_device *sdev)
527{
528 return sdev->sdev_state == SDEV_CREATED ||
529 sdev->sdev_state == SDEV_CREATED_BLOCK;
530}
531
532int scsi_internal_device_block_nowait(struct scsi_device *sdev);
533int scsi_internal_device_unblock_nowait(struct scsi_device *sdev,
534 enum scsi_device_state new_state);
535
536/* accessor functions for the SCSI parameters */
537static inline int scsi_device_sync(struct scsi_device *sdev)
538{
539 return sdev->sdtr;
540}
541static inline int scsi_device_wide(struct scsi_device *sdev)
542{
543 return sdev->wdtr;
544}
545static inline int scsi_device_dt(struct scsi_device *sdev)
546{
547 return sdev->ppr;
548}
549static inline int scsi_device_dt_only(struct scsi_device *sdev)
550{
551 if (sdev->inquiry_len < 57)
552 return 0;
553 return (sdev->inquiry[56] & 0x0c) == 0x04;
554}
555static inline int scsi_device_ius(struct scsi_device *sdev)
556{
557 if (sdev->inquiry_len < 57)
558 return 0;
559 return sdev->inquiry[56] & 0x01;
560}
561static inline int scsi_device_qas(struct scsi_device *sdev)
562{
563 if (sdev->inquiry_len < 57)
564 return 0;
565 return sdev->inquiry[56] & 0x02;
566}
567static inline int scsi_device_enclosure(struct scsi_device *sdev)
568{
569 return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
570}
571
572static inline int scsi_device_protection(struct scsi_device *sdev)
573{
574 if (sdev->no_dif)
575 return 0;
576
577 return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
578}
579
580static inline int scsi_device_tpgs(struct scsi_device *sdev)
581{
582 return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
583}
584
585/**
586 * scsi_device_supports_vpd - test if a device supports VPD pages
587 * @sdev: the &struct scsi_device to test
588 *
589 * If the 'try_vpd_pages' flag is set it takes precedence.
590 * Otherwise we will assume VPD pages are supported if the
591 * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set.
592 */
593static inline int scsi_device_supports_vpd(struct scsi_device *sdev)
594{
595 /* Attempt VPD inquiry if the device blacklist explicitly calls
596 * for it.
597 */
598 if (sdev->try_vpd_pages)
599 return 1;
600 /*
601 * Although VPD inquiries can go to SCSI-2 type devices,
602 * some USB ones crash on receiving them, and the pages
603 * we currently ask for are mandatory for SPC-2 and beyond
604 */
605 if (sdev->scsi_level >= SCSI_SPC_2 && !sdev->skip_vpd_pages)
606 return 1;
607 return 0;
608}
609
610static inline int scsi_device_busy(struct scsi_device *sdev)
611{
612 return sbitmap_weight(&sdev->budget_map);
613}
614
615#define MODULE_ALIAS_SCSI_DEVICE(type) \
616 MODULE_ALIAS("scsi:t-" __stringify(type) "*")
617#define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
618
619#endif /* _SCSI_SCSI_DEVICE_H */
1#ifndef _SCSI_SCSI_DEVICE_H
2#define _SCSI_SCSI_DEVICE_H
3
4#include <linux/list.h>
5#include <linux/spinlock.h>
6#include <linux/workqueue.h>
7#include <linux/blkdev.h>
8#include <scsi/scsi.h>
9#include <linux/atomic.h>
10
11struct device;
12struct request_queue;
13struct scsi_cmnd;
14struct scsi_lun;
15struct scsi_sense_hdr;
16
17struct scsi_mode_data {
18 __u32 length;
19 __u16 block_descriptor_length;
20 __u8 medium_type;
21 __u8 device_specific;
22 __u8 header_length;
23 __u8 longlba:1;
24};
25
26/*
27 * sdev state: If you alter this, you also need to alter scsi_sysfs.c
28 * (for the ascii descriptions) and the state model enforcer:
29 * scsi_lib:scsi_device_set_state().
30 */
31enum scsi_device_state {
32 SDEV_CREATED = 1, /* device created but not added to sysfs
33 * Only internal commands allowed (for inq) */
34 SDEV_RUNNING, /* device properly configured
35 * All commands allowed */
36 SDEV_CANCEL, /* beginning to delete device
37 * Only error handler commands allowed */
38 SDEV_DEL, /* device deleted
39 * no commands allowed */
40 SDEV_QUIESCE, /* Device quiescent. No block commands
41 * will be accepted, only specials (which
42 * originate in the mid-layer) */
43 SDEV_OFFLINE, /* Device offlined (by error handling or
44 * user request */
45 SDEV_TRANSPORT_OFFLINE, /* Offlined by transport class error handler */
46 SDEV_BLOCK, /* Device blocked by scsi lld. No
47 * scsi commands from user or midlayer
48 * should be issued to the scsi
49 * lld. */
50 SDEV_CREATED_BLOCK, /* same as above but for created devices */
51};
52
53enum scsi_device_event {
54 SDEV_EVT_MEDIA_CHANGE = 1, /* media has changed */
55 SDEV_EVT_INQUIRY_CHANGE_REPORTED, /* 3F 03 UA reported */
56 SDEV_EVT_CAPACITY_CHANGE_REPORTED, /* 2A 09 UA reported */
57 SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED, /* 38 07 UA reported */
58 SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED, /* 2A 01 UA reported */
59 SDEV_EVT_LUN_CHANGE_REPORTED, /* 3F 0E UA reported */
60
61 SDEV_EVT_FIRST = SDEV_EVT_MEDIA_CHANGE,
62 SDEV_EVT_LAST = SDEV_EVT_LUN_CHANGE_REPORTED,
63
64 SDEV_EVT_MAXBITS = SDEV_EVT_LAST + 1
65};
66
67struct scsi_event {
68 enum scsi_device_event evt_type;
69 struct list_head node;
70
71 /* put union of data structures, for non-simple event types,
72 * here
73 */
74};
75
76struct scsi_device {
77 struct Scsi_Host *host;
78 struct request_queue *request_queue;
79
80 /* the next two are protected by the host->host_lock */
81 struct list_head siblings; /* list of all devices on this host */
82 struct list_head same_target_siblings; /* just the devices sharing same target id */
83
84 /* this is now protected by the request_queue->queue_lock */
85 unsigned int device_busy; /* commands actually active on
86 * low-level. protected by queue_lock. */
87 spinlock_t list_lock;
88 struct list_head cmd_list; /* queue of in use SCSI Command structures */
89 struct list_head starved_entry;
90 struct scsi_cmnd *current_cmnd; /* currently active command */
91 unsigned short queue_depth; /* How deep of a queue we want */
92 unsigned short max_queue_depth; /* max queue depth */
93 unsigned short last_queue_full_depth; /* These two are used by */
94 unsigned short last_queue_full_count; /* scsi_track_queue_full() */
95 unsigned long last_queue_full_time; /* last queue full time */
96 unsigned long queue_ramp_up_period; /* ramp up period in jiffies */
97#define SCSI_DEFAULT_RAMP_UP_PERIOD (120 * HZ)
98
99 unsigned long last_queue_ramp_up; /* last queue ramp up time */
100
101 unsigned int id, lun, channel;
102
103 unsigned int manufacturer; /* Manufacturer of device, for using
104 * vendor-specific cmd's */
105 unsigned sector_size; /* size in bytes */
106
107 void *hostdata; /* available to low-level driver */
108 char type;
109 char scsi_level;
110 char inq_periph_qual; /* PQ from INQUIRY data */
111 unsigned char inquiry_len; /* valid bytes in 'inquiry' */
112 unsigned char * inquiry; /* INQUIRY response data */
113 const char * vendor; /* [back_compat] point into 'inquiry' ... */
114 const char * model; /* ... after scan; point to static string */
115 const char * rev; /* ... "nullnullnullnull" before scan */
116
117#define SCSI_VPD_PG_LEN 255
118 int vpd_pg83_len;
119 unsigned char *vpd_pg83;
120 int vpd_pg80_len;
121 unsigned char *vpd_pg80;
122 unsigned char current_tag; /* current tag */
123 struct scsi_target *sdev_target; /* used only for single_lun */
124
125 unsigned int sdev_bflags; /* black/white flags as also found in
126 * scsi_devinfo.[hc]. For now used only to
127 * pass settings from slave_alloc to scsi
128 * core. */
129 unsigned int eh_timeout; /* Error handling timeout */
130 unsigned writeable:1;
131 unsigned removable:1;
132 unsigned changed:1; /* Data invalid due to media change */
133 unsigned busy:1; /* Used to prevent races */
134 unsigned lockable:1; /* Able to prevent media removal */
135 unsigned locked:1; /* Media removal disabled */
136 unsigned borken:1; /* Tell the Seagate driver to be
137 * painfully slow on this device */
138 unsigned disconnect:1; /* can disconnect */
139 unsigned soft_reset:1; /* Uses soft reset option */
140 unsigned sdtr:1; /* Device supports SDTR messages */
141 unsigned wdtr:1; /* Device supports WDTR messages */
142 unsigned ppr:1; /* Device supports PPR messages */
143 unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */
144 unsigned simple_tags:1; /* simple queue tag messages are enabled */
145 unsigned ordered_tags:1;/* ordered queue tag messages are enabled */
146 unsigned was_reset:1; /* There was a bus reset on the bus for
147 * this device */
148 unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
149 * because we did a bus reset. */
150 unsigned use_10_for_rw:1; /* first try 10-byte read / write */
151 unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
152 unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */
153 unsigned no_write_same:1; /* no WRITE SAME command */
154 unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
155 unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
156 unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
157 unsigned skip_vpd_pages:1; /* do not read VPD pages */
158 unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
159 unsigned no_start_on_add:1; /* do not issue start on add */
160 unsigned allow_restart:1; /* issue START_UNIT in error handler */
161 unsigned manage_start_stop:1; /* Let HLD (sd) manage start/stop */
162 unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
163 unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
164 unsigned select_no_atn:1;
165 unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */
166 unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */
167 unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */
168 unsigned last_sector_bug:1; /* do not use multisector accesses on
169 SD_LAST_BUGGY_SECTORS */
170 unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
171 unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
172 unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */
173 unsigned is_visible:1; /* is the device visible in sysfs */
174 unsigned wce_default_on:1; /* Cache is ON by default */
175 unsigned no_dif:1; /* T10 PI (DIF) should be disabled */
176
177 atomic_t disk_events_disable_depth; /* disable depth for disk events */
178
179 DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
180 DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */
181 struct list_head event_list; /* asserted events */
182 struct work_struct event_work;
183
184 unsigned int device_blocked; /* Device returned QUEUE_FULL. */
185
186 unsigned int max_device_blocked; /* what device_blocked counts down from */
187#define SCSI_DEFAULT_DEVICE_BLOCKED 3
188
189 atomic_t iorequest_cnt;
190 atomic_t iodone_cnt;
191 atomic_t ioerr_cnt;
192
193 struct device sdev_gendev,
194 sdev_dev;
195
196 struct execute_work ew; /* used to get process context on put */
197 struct work_struct requeue_work;
198
199 struct scsi_dh_data *scsi_dh_data;
200 enum scsi_device_state sdev_state;
201 unsigned long sdev_data[0];
202} __attribute__((aligned(sizeof(unsigned long))));
203
204struct scsi_dh_devlist {
205 char *vendor;
206 char *model;
207};
208
209typedef void (*activate_complete)(void *, int);
210struct scsi_device_handler {
211 /* Used by the infrastructure */
212 struct list_head list; /* list of scsi_device_handlers */
213
214 /* Filled by the hardware handler */
215 struct module *module;
216 const char *name;
217 const struct scsi_dh_devlist *devlist;
218 int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
219 int (*attach)(struct scsi_device *);
220 void (*detach)(struct scsi_device *);
221 int (*activate)(struct scsi_device *, activate_complete, void *);
222 int (*prep_fn)(struct scsi_device *, struct request *);
223 int (*set_params)(struct scsi_device *, const char *);
224 bool (*match)(struct scsi_device *);
225};
226
227struct scsi_dh_data {
228 struct scsi_device_handler *scsi_dh;
229 struct scsi_device *sdev;
230 struct kref kref;
231 char buf[0];
232};
233
234#define to_scsi_device(d) \
235 container_of(d, struct scsi_device, sdev_gendev)
236#define class_to_sdev(d) \
237 container_of(d, struct scsi_device, sdev_dev)
238#define transport_class_to_sdev(class_dev) \
239 to_scsi_device(class_dev->parent)
240
241#define sdev_printk(prefix, sdev, fmt, a...) \
242 dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a)
243
244#define sdev_dbg(sdev, fmt, a...) \
245 dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
246
247#define scmd_printk(prefix, scmd, fmt, a...) \
248 (scmd)->request->rq_disk ? \
249 sdev_printk(prefix, (scmd)->device, "[%s] " fmt, \
250 (scmd)->request->rq_disk->disk_name, ##a) : \
251 sdev_printk(prefix, (scmd)->device, fmt, ##a)
252
253#define scmd_dbg(scmd, fmt, a...) \
254 do { \
255 if ((scmd)->request->rq_disk) \
256 sdev_dbg((scmd)->device, "[%s] " fmt, \
257 (scmd)->request->rq_disk->disk_name, ##a);\
258 else \
259 sdev_dbg((scmd)->device, fmt, ##a); \
260 } while (0)
261
262enum scsi_target_state {
263 STARGET_CREATED = 1,
264 STARGET_RUNNING,
265 STARGET_DEL,
266};
267
268/*
269 * scsi_target: representation of a scsi target, for now, this is only
270 * used for single_lun devices. If no one has active IO to the target,
271 * starget_sdev_user is NULL, else it points to the active sdev.
272 */
273struct scsi_target {
274 struct scsi_device *starget_sdev_user;
275 struct list_head siblings;
276 struct list_head devices;
277 struct device dev;
278 struct kref reap_ref; /* last put renders target invisible */
279 unsigned int channel;
280 unsigned int id; /* target id ... replace
281 * scsi_device.id eventually */
282 unsigned int create:1; /* signal that it needs to be added */
283 unsigned int single_lun:1; /* Indicates we should only
284 * allow I/O to one of the luns
285 * for the device at a time. */
286 unsigned int pdt_1f_for_no_lun:1; /* PDT = 0x1f
287 * means no lun present. */
288 unsigned int no_report_luns:1; /* Don't use
289 * REPORT LUNS for scanning. */
290 unsigned int expecting_lun_change:1; /* A device has reported
291 * a 3F/0E UA, other devices on
292 * the same target will also. */
293 /* commands actually active on LLD. protected by host lock. */
294 unsigned int target_busy;
295 /*
296 * LLDs should set this in the slave_alloc host template callout.
297 * If set to zero then there is not limit.
298 */
299 unsigned int can_queue;
300 unsigned int target_blocked;
301 unsigned int max_target_blocked;
302#define SCSI_DEFAULT_TARGET_BLOCKED 3
303
304 char scsi_level;
305 enum scsi_target_state state;
306 void *hostdata; /* available to low-level driver */
307 unsigned long starget_data[0]; /* for the transport */
308 /* starget_data must be the last element!!!! */
309} __attribute__((aligned(sizeof(unsigned long))));
310
311#define to_scsi_target(d) container_of(d, struct scsi_target, dev)
312static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
313{
314 return to_scsi_target(sdev->sdev_gendev.parent);
315}
316#define transport_class_to_starget(class_dev) \
317 to_scsi_target(class_dev->parent)
318
319#define starget_printk(prefix, starget, fmt, a...) \
320 dev_printk(prefix, &(starget)->dev, fmt, ##a)
321
322extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
323 uint, uint, uint, void *hostdata);
324extern int scsi_add_device(struct Scsi_Host *host, uint channel,
325 uint target, uint lun);
326extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
327extern void scsi_remove_device(struct scsi_device *);
328extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
329void scsi_attach_vpd(struct scsi_device *sdev);
330
331extern int scsi_device_get(struct scsi_device *);
332extern void scsi_device_put(struct scsi_device *);
333extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
334 uint, uint, uint);
335extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
336 uint, uint, uint);
337extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
338 uint);
339extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
340 uint);
341extern void starget_for_each_device(struct scsi_target *, void *,
342 void (*fn)(struct scsi_device *, void *));
343extern void __starget_for_each_device(struct scsi_target *, void *,
344 void (*fn)(struct scsi_device *,
345 void *));
346
347/* only exposed to implement shost_for_each_device */
348extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
349 struct scsi_device *);
350
351/**
352 * shost_for_each_device - iterate over all devices of a host
353 * @sdev: the &struct scsi_device to use as a cursor
354 * @shost: the &struct scsi_host to iterate over
355 *
356 * Iterator that returns each device attached to @shost. This loop
357 * takes a reference on each device and releases it at the end. If
358 * you break out of the loop, you must call scsi_device_put(sdev).
359 */
360#define shost_for_each_device(sdev, shost) \
361 for ((sdev) = __scsi_iterate_devices((shost), NULL); \
362 (sdev); \
363 (sdev) = __scsi_iterate_devices((shost), (sdev)))
364
365/**
366 * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
367 * @sdev: the &struct scsi_device to use as a cursor
368 * @shost: the &struct scsi_host to iterate over
369 *
370 * Iterator that returns each device attached to @shost. It does _not_
371 * take a reference on the scsi_device, so the whole loop must be
372 * protected by shost->host_lock.
373 *
374 * Note: The only reason to use this is because you need to access the
375 * device list in interrupt context. Otherwise you really want to use
376 * shost_for_each_device instead.
377 */
378#define __shost_for_each_device(sdev, shost) \
379 list_for_each_entry((sdev), &((shost)->__devices), siblings)
380
381extern void scsi_adjust_queue_depth(struct scsi_device *, int, int);
382extern int scsi_track_queue_full(struct scsi_device *, int);
383
384extern int scsi_set_medium_removal(struct scsi_device *, char);
385
386extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
387 unsigned char *buffer, int len, int timeout,
388 int retries, struct scsi_mode_data *data,
389 struct scsi_sense_hdr *);
390extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
391 int modepage, unsigned char *buffer, int len,
392 int timeout, int retries,
393 struct scsi_mode_data *data,
394 struct scsi_sense_hdr *);
395extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
396 int retries, struct scsi_sense_hdr *sshdr);
397extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
398 int buf_len);
399extern int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
400 unsigned int len, unsigned char opcode);
401extern int scsi_device_set_state(struct scsi_device *sdev,
402 enum scsi_device_state state);
403extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
404 gfp_t gfpflags);
405extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
406extern void sdev_evt_send_simple(struct scsi_device *sdev,
407 enum scsi_device_event evt_type, gfp_t gfpflags);
408extern int scsi_device_quiesce(struct scsi_device *sdev);
409extern void scsi_device_resume(struct scsi_device *sdev);
410extern void scsi_target_quiesce(struct scsi_target *);
411extern void scsi_target_resume(struct scsi_target *);
412extern void scsi_scan_target(struct device *parent, unsigned int channel,
413 unsigned int id, unsigned int lun, int rescan);
414extern void scsi_target_reap(struct scsi_target *);
415extern void scsi_target_block(struct device *);
416extern void scsi_target_unblock(struct device *, enum scsi_device_state);
417extern void scsi_remove_target(struct device *);
418extern void int_to_scsilun(unsigned int, struct scsi_lun *);
419extern int scsilun_to_int(struct scsi_lun *);
420extern const char *scsi_device_state_name(enum scsi_device_state);
421extern int scsi_is_sdev_device(const struct device *);
422extern int scsi_is_target_device(const struct device *);
423extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
424 int data_direction, void *buffer, unsigned bufflen,
425 unsigned char *sense, int timeout, int retries,
426 u64 flags, int *resid);
427extern int scsi_execute_req_flags(struct scsi_device *sdev,
428 const unsigned char *cmd, int data_direction, void *buffer,
429 unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
430 int retries, int *resid, u64 flags);
431static inline int scsi_execute_req(struct scsi_device *sdev,
432 const unsigned char *cmd, int data_direction, void *buffer,
433 unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
434 int retries, int *resid)
435{
436 return scsi_execute_req_flags(sdev, cmd, data_direction, buffer,
437 bufflen, sshdr, timeout, retries, resid, 0);
438}
439extern void sdev_disable_disk_events(struct scsi_device *sdev);
440extern void sdev_enable_disk_events(struct scsi_device *sdev);
441
442#ifdef CONFIG_PM_RUNTIME
443extern int scsi_autopm_get_device(struct scsi_device *);
444extern void scsi_autopm_put_device(struct scsi_device *);
445#else
446static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
447static inline void scsi_autopm_put_device(struct scsi_device *d) {}
448#endif /* CONFIG_PM_RUNTIME */
449
450static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
451{
452 return device_reprobe(&sdev->sdev_gendev);
453}
454
455static inline unsigned int sdev_channel(struct scsi_device *sdev)
456{
457 return sdev->channel;
458}
459
460static inline unsigned int sdev_id(struct scsi_device *sdev)
461{
462 return sdev->id;
463}
464
465#define scmd_id(scmd) sdev_id((scmd)->device)
466#define scmd_channel(scmd) sdev_channel((scmd)->device)
467
468/*
469 * checks for positions of the SCSI state machine
470 */
471static inline int scsi_device_online(struct scsi_device *sdev)
472{
473 return (sdev->sdev_state != SDEV_OFFLINE &&
474 sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
475 sdev->sdev_state != SDEV_DEL);
476}
477static inline int scsi_device_blocked(struct scsi_device *sdev)
478{
479 return sdev->sdev_state == SDEV_BLOCK ||
480 sdev->sdev_state == SDEV_CREATED_BLOCK;
481}
482static inline int scsi_device_created(struct scsi_device *sdev)
483{
484 return sdev->sdev_state == SDEV_CREATED ||
485 sdev->sdev_state == SDEV_CREATED_BLOCK;
486}
487
488/* accessor functions for the SCSI parameters */
489static inline int scsi_device_sync(struct scsi_device *sdev)
490{
491 return sdev->sdtr;
492}
493static inline int scsi_device_wide(struct scsi_device *sdev)
494{
495 return sdev->wdtr;
496}
497static inline int scsi_device_dt(struct scsi_device *sdev)
498{
499 return sdev->ppr;
500}
501static inline int scsi_device_dt_only(struct scsi_device *sdev)
502{
503 if (sdev->inquiry_len < 57)
504 return 0;
505 return (sdev->inquiry[56] & 0x0c) == 0x04;
506}
507static inline int scsi_device_ius(struct scsi_device *sdev)
508{
509 if (sdev->inquiry_len < 57)
510 return 0;
511 return sdev->inquiry[56] & 0x01;
512}
513static inline int scsi_device_qas(struct scsi_device *sdev)
514{
515 if (sdev->inquiry_len < 57)
516 return 0;
517 return sdev->inquiry[56] & 0x02;
518}
519static inline int scsi_device_enclosure(struct scsi_device *sdev)
520{
521 return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
522}
523
524static inline int scsi_device_protection(struct scsi_device *sdev)
525{
526 if (sdev->no_dif)
527 return 0;
528
529 return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
530}
531
532static inline int scsi_device_tpgs(struct scsi_device *sdev)
533{
534 return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
535}
536
537#define MODULE_ALIAS_SCSI_DEVICE(type) \
538 MODULE_ALIAS("scsi:t-" __stringify(type) "*")
539#define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
540
541#endif /* _SCSI_SCSI_DEVICE_H */