Loading...
Note: File does not exist in v3.15.
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * phy-brcm-usb-init.c - Broadcom USB Phy chip specific init functions
4 *
5 * Copyright (C) 2014-2017 Broadcom
6 */
7
8/*
9 * This module contains USB PHY initialization for power up and S3 resume
10 */
11
12#include <linux/delay.h>
13#include <linux/io.h>
14
15#include <linux/soc/brcmstb/brcmstb.h>
16#include "phy-brcm-usb-init.h"
17
18#define PHY_PORTS 2
19#define PHY_PORT_SELECT_0 0
20#define PHY_PORT_SELECT_1 0x1000
21
22/* Register definitions for the USB CTRL block */
23#define USB_CTRL_SETUP 0x00
24#define USB_CTRL_SETUP_BABO_MASK BIT(0)
25#define USB_CTRL_SETUP_FNHW_MASK BIT(1)
26#define USB_CTRL_SETUP_FNBO_MASK BIT(2)
27#define USB_CTRL_SETUP_WABO_MASK BIT(3)
28#define USB_CTRL_SETUP_IOC_MASK BIT(4)
29#define USB_CTRL_SETUP_IPP_MASK BIT(5)
30#define USB_CTRL_SETUP_SCB_CLIENT_SWAP_MASK BIT(13) /* option */
31#define USB_CTRL_SETUP_SCB1_EN_MASK BIT(14) /* option */
32#define USB_CTRL_SETUP_SCB2_EN_MASK BIT(15) /* option */
33#define USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK BIT(17) /* option */
34#define USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK BIT(16) /* option */
35#define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK BIT(25) /* option */
36#define USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK BIT(26) /* option */
37#define USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK BIT(27) /* opt */
38#define USB_CTRL_SETUP_OC3_DISABLE_MASK GENMASK(31, 30) /* option */
39#define USB_CTRL_PLL_CTL 0x04
40#define USB_CTRL_PLL_CTL_PLL_SUSPEND_EN_MASK BIT(27)
41#define USB_CTRL_PLL_CTL_PLL_RESETB_MASK BIT(30)
42#define USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK BIT(31) /* option */
43#define USB_CTRL_EBRIDGE 0x0c
44#define USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK GENMASK(11, 7) /* option */
45#define USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK BIT(17) /* option */
46#define USB_CTRL_OBRIDGE 0x10
47#define USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK BIT(27)
48#define USB_CTRL_MDIO 0x14
49#define USB_CTRL_MDIO2 0x18
50#define USB_CTRL_UTMI_CTL_1 0x2c
51#define USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_MASK BIT(11)
52#define USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_P1_MASK BIT(27)
53#define USB_CTRL_USB_PM 0x34
54#define USB_CTRL_USB_PM_RMTWKUP_EN_MASK BIT(0)
55#define USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK GENMASK(21, 20) /* option */
56#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK BIT(22) /* option */
57#define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK BIT(23) /* option */
58#define USB_CTRL_USB_PM_USB20_HC_RESETB_MASK GENMASK(29, 28) /* option */
59#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK BIT(30) /* option */
60#define USB_CTRL_USB_PM_SOFT_RESET_MASK BIT(30) /* option */
61#define USB_CTRL_USB_PM_USB_PWRDN_MASK BIT(31) /* option */
62#define USB_CTRL_USB_PM_STATUS 0x38
63#define USB_CTRL_USB30_CTL1 0x60
64#define USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK BIT(4)
65#define USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK BIT(16)
66#define USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK BIT(17) /* option */
67#define USB_CTRL_USB30_CTL1_USB3_IOC_MASK BIT(28) /* option */
68#define USB_CTRL_USB30_CTL1_USB3_IPP_MASK BIT(29) /* option */
69#define USB_CTRL_USB30_PCTL 0x70
70#define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_MASK BIT(1)
71#define USB_CTRL_USB30_PCTL_PHY3_IDDQ_OVERRIDE_MASK BIT(15)
72#define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_P1_MASK BIT(17)
73#define USB_CTRL_USB_DEVICE_CTL1 0x90
74#define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK GENMASK(1, 0) /* option */
75
76/* Register definitions for the XHCI EC block */
77#define USB_XHCI_EC_IRAADR 0x658
78#define USB_XHCI_EC_IRADAT 0x65c
79
80enum brcm_family_type {
81 BRCM_FAMILY_3390A0,
82 BRCM_FAMILY_4908,
83 BRCM_FAMILY_7250B0,
84 BRCM_FAMILY_7271A0,
85 BRCM_FAMILY_7364A0,
86 BRCM_FAMILY_7366C0,
87 BRCM_FAMILY_74371A0,
88 BRCM_FAMILY_7439B0,
89 BRCM_FAMILY_7445D0,
90 BRCM_FAMILY_7260A0,
91 BRCM_FAMILY_7278A0,
92 BRCM_FAMILY_COUNT,
93};
94
95#define USB_BRCM_FAMILY(chip) \
96 [BRCM_FAMILY_##chip] = __stringify(chip)
97
98static const char *family_names[BRCM_FAMILY_COUNT] = {
99 USB_BRCM_FAMILY(3390A0),
100 USB_BRCM_FAMILY(4908),
101 USB_BRCM_FAMILY(7250B0),
102 USB_BRCM_FAMILY(7271A0),
103 USB_BRCM_FAMILY(7364A0),
104 USB_BRCM_FAMILY(7366C0),
105 USB_BRCM_FAMILY(74371A0),
106 USB_BRCM_FAMILY(7439B0),
107 USB_BRCM_FAMILY(7445D0),
108 USB_BRCM_FAMILY(7260A0),
109 USB_BRCM_FAMILY(7278A0),
110};
111
112enum {
113 USB_CTRL_SETUP_SCB1_EN_SELECTOR,
114 USB_CTRL_SETUP_SCB2_EN_SELECTOR,
115 USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR,
116 USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR,
117 USB_CTRL_SETUP_OC3_DISABLE_SELECTOR,
118 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR,
119 USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR,
120 USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR,
121 USB_CTRL_USB_PM_USB_PWRDN_SELECTOR,
122 USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_SELECTOR,
123 USB_CTRL_USB30_CTL1_USB3_IOC_SELECTOR,
124 USB_CTRL_USB30_CTL1_USB3_IPP_SELECTOR,
125 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_SELECTOR,
126 USB_CTRL_USB_PM_SOFT_RESET_SELECTOR,
127 USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_SELECTOR,
128 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_SELECTOR,
129 USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR,
130 USB_CTRL_SETUP_ENDIAN_SELECTOR,
131 USB_CTRL_SELECTOR_COUNT,
132};
133
134#define USB_CTRL_MASK_FAMILY(params, reg, field) \
135 (params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR])
136
137#define USB_CTRL_SET_FAMILY(params, reg, field) \
138 usb_ctrl_set_family(params, USB_CTRL_##reg, \
139 USB_CTRL_##reg##_##field##_SELECTOR)
140#define USB_CTRL_UNSET_FAMILY(params, reg, field) \
141 usb_ctrl_unset_family(params, USB_CTRL_##reg, \
142 USB_CTRL_##reg##_##field##_SELECTOR)
143
144#define MDIO_USB2 0
145#define MDIO_USB3 BIT(31)
146
147#define USB_CTRL_SETUP_ENDIAN_BITS ( \
148 USB_CTRL_MASK(SETUP, BABO) | \
149 USB_CTRL_MASK(SETUP, FNHW) | \
150 USB_CTRL_MASK(SETUP, FNBO) | \
151 USB_CTRL_MASK(SETUP, WABO))
152
153#ifdef __LITTLE_ENDIAN
154#define ENDIAN_SETTINGS ( \
155 USB_CTRL_MASK(SETUP, BABO) | \
156 USB_CTRL_MASK(SETUP, FNHW))
157#else
158#define ENDIAN_SETTINGS ( \
159 USB_CTRL_MASK(SETUP, FNHW) | \
160 USB_CTRL_MASK(SETUP, FNBO) | \
161 USB_CTRL_MASK(SETUP, WABO))
162#endif
163
164struct id_to_type {
165 u32 id;
166 int type;
167};
168
169static const struct id_to_type id_to_type_table[] = {
170 { 0x33900000, BRCM_FAMILY_3390A0 },
171 { 0x72500010, BRCM_FAMILY_7250B0 },
172 { 0x72600000, BRCM_FAMILY_7260A0 },
173 { 0x72550000, BRCM_FAMILY_7260A0 },
174 { 0x72680000, BRCM_FAMILY_7271A0 },
175 { 0x72710000, BRCM_FAMILY_7271A0 },
176 { 0x73640000, BRCM_FAMILY_7364A0 },
177 { 0x73660020, BRCM_FAMILY_7366C0 },
178 { 0x07437100, BRCM_FAMILY_74371A0 },
179 { 0x74390010, BRCM_FAMILY_7439B0 },
180 { 0x74450030, BRCM_FAMILY_7445D0 },
181 { 0x72780000, BRCM_FAMILY_7278A0 },
182 { 0, BRCM_FAMILY_7271A0 }, /* default */
183};
184
185static const u32
186usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
187 /* 3390B0 */
188 [BRCM_FAMILY_3390A0] = {
189 USB_CTRL_SETUP_SCB1_EN_MASK,
190 USB_CTRL_SETUP_SCB2_EN_MASK,
191 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
192 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
193 USB_CTRL_SETUP_OC3_DISABLE_MASK,
194 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
195 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
196 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
197 USB_CTRL_USB_PM_USB_PWRDN_MASK,
198 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
199 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
200 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
201 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
202 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
203 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
204 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
205 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
206 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
207 },
208 /* 4908 */
209 [BRCM_FAMILY_4908] = {
210 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
211 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
212 0, /* USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */
213 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
214 0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */
215 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
216 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
217 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
218 USB_CTRL_USB_PM_USB_PWRDN_MASK,
219 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
220 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
221 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
222 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
223 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
224 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
225 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
226 0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK */
227 0, /* USB_CTRL_SETUP ENDIAN bits */
228 },
229 /* 7250b0 */
230 [BRCM_FAMILY_7250B0] = {
231 USB_CTRL_SETUP_SCB1_EN_MASK,
232 USB_CTRL_SETUP_SCB2_EN_MASK,
233 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
234 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
235 USB_CTRL_SETUP_OC3_DISABLE_MASK,
236 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
237 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
238 USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK,
239 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */
240 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
241 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
242 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
243 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
244 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
245 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
246 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
247 USB_CTRL_USB_PM_USB20_HC_RESETB_MASK,
248 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
249 },
250 /* 7271a0 */
251 [BRCM_FAMILY_7271A0] = {
252 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
253 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
254 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
255 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
256 USB_CTRL_SETUP_OC3_DISABLE_MASK,
257 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
258 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
259 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
260 USB_CTRL_USB_PM_USB_PWRDN_MASK,
261 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
262 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
263 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
264 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
265 USB_CTRL_USB_PM_SOFT_RESET_MASK,
266 USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK,
267 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK,
268 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
269 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
270 },
271 /* 7364a0 */
272 [BRCM_FAMILY_7364A0] = {
273 USB_CTRL_SETUP_SCB1_EN_MASK,
274 USB_CTRL_SETUP_SCB2_EN_MASK,
275 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
276 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
277 USB_CTRL_SETUP_OC3_DISABLE_MASK,
278 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
279 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
280 USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK,
281 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */
282 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
283 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
284 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
285 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
286 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
287 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
288 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
289 USB_CTRL_USB_PM_USB20_HC_RESETB_MASK,
290 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
291 },
292 /* 7366c0 */
293 [BRCM_FAMILY_7366C0] = {
294 USB_CTRL_SETUP_SCB1_EN_MASK,
295 USB_CTRL_SETUP_SCB2_EN_MASK,
296 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
297 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
298 USB_CTRL_SETUP_OC3_DISABLE_MASK,
299 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
300 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
301 USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK,
302 USB_CTRL_USB_PM_USB_PWRDN_MASK,
303 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
304 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
305 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
306 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
307 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
308 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
309 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
310 USB_CTRL_USB_PM_USB20_HC_RESETB_MASK,
311 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
312 },
313 /* 74371A0 */
314 [BRCM_FAMILY_74371A0] = {
315 USB_CTRL_SETUP_SCB1_EN_MASK,
316 USB_CTRL_SETUP_SCB2_EN_MASK,
317 USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK,
318 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
319 0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */
320 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
321 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
322 0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */
323 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */
324 USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK,
325 USB_CTRL_USB30_CTL1_USB3_IOC_MASK,
326 USB_CTRL_USB30_CTL1_USB3_IPP_MASK,
327 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
328 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
329 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
330 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
331 0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_MASK */
332 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
333 },
334 /* 7439B0 */
335 [BRCM_FAMILY_7439B0] = {
336 USB_CTRL_SETUP_SCB1_EN_MASK,
337 USB_CTRL_SETUP_SCB2_EN_MASK,
338 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
339 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
340 USB_CTRL_SETUP_OC3_DISABLE_MASK,
341 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
342 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
343 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
344 USB_CTRL_USB_PM_USB_PWRDN_MASK,
345 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
346 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
347 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
348 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
349 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
350 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
351 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
352 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
353 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
354 },
355 /* 7445d0 */
356 [BRCM_FAMILY_7445D0] = {
357 USB_CTRL_SETUP_SCB1_EN_MASK,
358 USB_CTRL_SETUP_SCB2_EN_MASK,
359 USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK,
360 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
361 USB_CTRL_SETUP_OC3_DISABLE_MASK,
362 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
363 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
364 0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */
365 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */
366 USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK,
367 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
368 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
369 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
370 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
371 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
372 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
373 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
374 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
375 },
376 /* 7260a0 */
377 [BRCM_FAMILY_7260A0] = {
378 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
379 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
380 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
381 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
382 USB_CTRL_SETUP_OC3_DISABLE_MASK,
383 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
384 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
385 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
386 USB_CTRL_USB_PM_USB_PWRDN_MASK,
387 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
388 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
389 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
390 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
391 USB_CTRL_USB_PM_SOFT_RESET_MASK,
392 USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK,
393 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK,
394 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
395 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
396 },
397 /* 7278a0 */
398 [BRCM_FAMILY_7278A0] = {
399 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
400 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
401 0, /*USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */
402 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
403 USB_CTRL_SETUP_OC3_DISABLE_MASK,
404 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
405 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
406 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
407 USB_CTRL_USB_PM_USB_PWRDN_MASK,
408 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
409 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
410 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
411 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
412 USB_CTRL_USB_PM_SOFT_RESET_MASK,
413 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
414 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
415 0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_MASK */
416 0, /* USB_CTRL_SETUP ENDIAN bits */
417 },
418};
419
420static inline
421void usb_ctrl_unset_family(struct brcm_usb_init_params *params,
422 u32 reg_offset, u32 field)
423{
424 u32 mask;
425
426 mask = params->usb_reg_bits_map[field];
427 brcm_usb_ctrl_unset(params->regs[BRCM_REGS_CTRL] + reg_offset, mask);
428};
429
430static inline
431void usb_ctrl_set_family(struct brcm_usb_init_params *params,
432 u32 reg_offset, u32 field)
433{
434 u32 mask;
435
436 mask = params->usb_reg_bits_map[field];
437 brcm_usb_ctrl_set(params->regs[BRCM_REGS_CTRL] + reg_offset, mask);
438};
439
440static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode)
441{
442 u32 data;
443
444 data = (reg << 16) | mode;
445 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
446 data |= (1 << 24);
447 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
448 data &= ~(1 << 24);
449 /* wait for the 60MHz parallel to serial shifter */
450 usleep_range(10, 20);
451 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
452 /* wait for the 60MHz parallel to serial shifter */
453 usleep_range(10, 20);
454
455 return brcm_usb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff;
456}
457
458static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg,
459 u32 val, int mode)
460{
461 u32 data;
462
463 data = (reg << 16) | val | mode;
464 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
465 data |= (1 << 25);
466 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
467 data &= ~(1 << 25);
468
469 /* wait for the 60MHz parallel to serial shifter */
470 usleep_range(10, 20);
471 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
472 /* wait for the 60MHz parallel to serial shifter */
473 usleep_range(10, 20);
474}
475
476static void brcmusb_usb_phy_ldo_fix(void __iomem *ctrl_base)
477{
478 /* first disable FSM but also leave it that way */
479 /* to allow normal suspend/resume */
480 USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN);
481 USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN_P1);
482
483 /* reset USB 2.0 PLL */
484 USB_CTRL_UNSET(ctrl_base, PLL_CTL, PLL_RESETB);
485 /* PLL reset period */
486 udelay(1);
487 USB_CTRL_SET(ctrl_base, PLL_CTL, PLL_RESETB);
488 /* Give PLL enough time to lock */
489 usleep_range(1000, 2000);
490}
491
492static void brcmusb_usb2_eye_fix(void __iomem *ctrl_base)
493{
494 /* Increase USB 2.0 TX level to meet spec requirement */
495 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x80a0, MDIO_USB2);
496 brcmusb_usb_mdio_write(ctrl_base, 0x0a, 0xc6a0, MDIO_USB2);
497}
498
499static void brcmusb_usb3_pll_fix(void __iomem *ctrl_base)
500{
501 /* Set correct window for PLL lock detect */
502 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3);
503 brcmusb_usb_mdio_write(ctrl_base, 0x07, 0x1503, MDIO_USB3);
504}
505
506static void brcmusb_usb3_enable_pipe_reset(void __iomem *ctrl_base)
507{
508 u32 val;
509
510 /* Re-enable USB 3.0 pipe reset */
511 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3);
512 val = brcmusb_usb_mdio_read(ctrl_base, 0x0f, MDIO_USB3) | 0x200;
513 brcmusb_usb_mdio_write(ctrl_base, 0x0f, val, MDIO_USB3);
514}
515
516static void brcmusb_usb3_enable_sigdet(void __iomem *ctrl_base)
517{
518 u32 val, ofs;
519 int ii;
520
521 ofs = 0;
522 for (ii = 0; ii < PHY_PORTS; ++ii) {
523 /* Set correct default for sigdet */
524 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8080 + ofs),
525 MDIO_USB3);
526 val = brcmusb_usb_mdio_read(ctrl_base, 0x05, MDIO_USB3);
527 val = (val & ~0x800f) | 0x800d;
528 brcmusb_usb_mdio_write(ctrl_base, 0x05, val, MDIO_USB3);
529 ofs = PHY_PORT_SELECT_1;
530 }
531}
532
533static void brcmusb_usb3_enable_skip_align(void __iomem *ctrl_base)
534{
535 u32 val, ofs;
536 int ii;
537
538 ofs = 0;
539 for (ii = 0; ii < PHY_PORTS; ++ii) {
540 /* Set correct default for SKIP align */
541 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8060 + ofs),
542 MDIO_USB3);
543 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0x200;
544 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3);
545 ofs = PHY_PORT_SELECT_1;
546 }
547}
548
549static void brcmusb_usb3_unfreeze_aeq(void __iomem *ctrl_base)
550{
551 u32 val, ofs;
552 int ii;
553
554 ofs = 0;
555 for (ii = 0; ii < PHY_PORTS; ++ii) {
556 /* Let EQ freeze after TSEQ */
557 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x80e0 + ofs),
558 MDIO_USB3);
559 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3);
560 val &= ~0x0008;
561 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3);
562 ofs = PHY_PORT_SELECT_1;
563 }
564}
565
566static void brcmusb_usb3_pll_54mhz(struct brcm_usb_init_params *params)
567{
568 u32 ofs;
569 int ii;
570 void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL];
571
572 /*
573 * On newer B53 based SoC's, the reference clock for the
574 * 3.0 PLL has been changed from 50MHz to 54MHz so the
575 * PLL needs to be reprogrammed.
576 * See SWLINUX-4006.
577 *
578 * On the 7364C0, the reference clock for the
579 * 3.0 PLL has been changed from 50MHz to 54MHz to
580 * work around a MOCA issue.
581 * See SWLINUX-4169.
582 */
583 switch (params->selected_family) {
584 case BRCM_FAMILY_3390A0:
585 case BRCM_FAMILY_4908:
586 case BRCM_FAMILY_7250B0:
587 case BRCM_FAMILY_7366C0:
588 case BRCM_FAMILY_74371A0:
589 case BRCM_FAMILY_7439B0:
590 case BRCM_FAMILY_7445D0:
591 case BRCM_FAMILY_7260A0:
592 return;
593 case BRCM_FAMILY_7364A0:
594 if (BRCM_REV(params->family_id) < 0x20)
595 return;
596 break;
597 }
598
599 /* set USB 3.0 PLL to accept 54Mhz reference clock */
600 USB_CTRL_UNSET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START);
601
602 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3);
603 brcmusb_usb_mdio_write(ctrl_base, 0x10, 0x5784, MDIO_USB3);
604 brcmusb_usb_mdio_write(ctrl_base, 0x11, 0x01d0, MDIO_USB3);
605 brcmusb_usb_mdio_write(ctrl_base, 0x12, 0x1DE8, MDIO_USB3);
606 brcmusb_usb_mdio_write(ctrl_base, 0x13, 0xAA80, MDIO_USB3);
607 brcmusb_usb_mdio_write(ctrl_base, 0x14, 0x8826, MDIO_USB3);
608 brcmusb_usb_mdio_write(ctrl_base, 0x15, 0x0044, MDIO_USB3);
609 brcmusb_usb_mdio_write(ctrl_base, 0x16, 0x8000, MDIO_USB3);
610 brcmusb_usb_mdio_write(ctrl_base, 0x17, 0x0851, MDIO_USB3);
611 brcmusb_usb_mdio_write(ctrl_base, 0x18, 0x0000, MDIO_USB3);
612
613 /* both ports */
614 ofs = 0;
615 for (ii = 0; ii < PHY_PORTS; ++ii) {
616 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8040 + ofs),
617 MDIO_USB3);
618 brcmusb_usb_mdio_write(ctrl_base, 0x03, 0x0090, MDIO_USB3);
619 brcmusb_usb_mdio_write(ctrl_base, 0x04, 0x0134, MDIO_USB3);
620 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8020 + ofs),
621 MDIO_USB3);
622 brcmusb_usb_mdio_write(ctrl_base, 0x01, 0x00e2, MDIO_USB3);
623 ofs = PHY_PORT_SELECT_1;
624 }
625
626 /* restart PLL sequence */
627 USB_CTRL_SET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START);
628 /* Give PLL enough time to lock */
629 usleep_range(1000, 2000);
630}
631
632static void brcmusb_usb3_ssc_enable(void __iomem *ctrl_base)
633{
634 u32 val;
635
636 /* Enable USB 3.0 TX spread spectrum */
637 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8040, MDIO_USB3);
638 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf;
639 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3);
640
641 /* Currently, USB 3.0 SSC is enabled via port 0 MDIO registers,
642 * which should have been adequate. However, due to a bug in the
643 * USB 3.0 PHY, it must be enabled via both ports (HWUSB3DVT-26).
644 */
645 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x9040, MDIO_USB3);
646 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf;
647 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3);
648}
649
650static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params)
651{
652 void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL];
653
654 brcmusb_usb3_pll_fix(ctrl_base);
655 brcmusb_usb3_pll_54mhz(params);
656 brcmusb_usb3_ssc_enable(ctrl_base);
657 brcmusb_usb3_enable_pipe_reset(ctrl_base);
658 brcmusb_usb3_enable_sigdet(ctrl_base);
659 brcmusb_usb3_enable_skip_align(ctrl_base);
660 brcmusb_usb3_unfreeze_aeq(ctrl_base);
661}
662
663static void brcmusb_memc_fix(struct brcm_usb_init_params *params)
664{
665 u32 prid;
666
667 if (params->selected_family != BRCM_FAMILY_7445D0)
668 return;
669 /*
670 * This is a workaround for HW7445-1869 where a DMA write ends up
671 * doing a read pre-fetch after the end of the DMA buffer. This
672 * causes a problem when the DMA buffer is at the end of physical
673 * memory, causing the pre-fetch read to access non-existent memory,
674 * and the chip bondout has MEMC2 disabled. When the pre-fetch read
675 * tries to use the disabled MEMC2, it hangs the bus. The workaround
676 * is to disable MEMC2 access in the usb controller which avoids
677 * the hang.
678 */
679
680 prid = params->product_id & 0xfffff000;
681 switch (prid) {
682 case 0x72520000:
683 case 0x74480000:
684 case 0x74490000:
685 case 0x07252000:
686 case 0x07448000:
687 case 0x07449000:
688 USB_CTRL_UNSET_FAMILY(params, SETUP, SCB2_EN);
689 }
690}
691
692static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params)
693{
694 void __iomem *xhci_ec_base = params->regs[BRCM_REGS_XHCI_EC];
695 u32 val;
696
697 if (params->family_id != 0x74371000 || !xhci_ec_base)
698 return;
699 brcm_usb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR));
700 val = brcm_usb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
701
702 /* set cfg_pick_ss_lock */
703 val |= (1 << 27);
704 brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
705
706 /* Reset USB 3.0 PHY for workaround to take effect */
707 USB_CTRL_UNSET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB);
708 USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB);
709}
710
711static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params,
712 int on_off)
713{
714 /* Assert reset */
715 if (on_off) {
716 if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB))
717 USB_CTRL_UNSET_FAMILY(params, USB_PM, XHC_SOFT_RESETB);
718 else
719 USB_CTRL_UNSET_FAMILY(params,
720 USB30_CTL1, XHC_SOFT_RESETB);
721 } else { /* De-assert reset */
722 if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB))
723 USB_CTRL_SET_FAMILY(params, USB_PM, XHC_SOFT_RESETB);
724 else
725 USB_CTRL_SET_FAMILY(params, USB30_CTL1,
726 XHC_SOFT_RESETB);
727 }
728}
729
730/*
731 * Return the best map table family. The order is:
732 * - exact match of chip and major rev
733 * - exact match of chip and closest older major rev
734 * - default chip/rev.
735 * NOTE: The minor rev is always ignored.
736 */
737static enum brcm_family_type get_family_type(
738 struct brcm_usb_init_params *params)
739{
740 int last_type = -1;
741 u32 last_family = 0;
742 u32 family_no_major;
743 unsigned int x;
744 u32 family;
745
746 family = params->family_id & 0xfffffff0;
747 family_no_major = params->family_id & 0xffffff00;
748 for (x = 0; id_to_type_table[x].id; x++) {
749 if (family == id_to_type_table[x].id)
750 return id_to_type_table[x].type;
751 if (family_no_major == (id_to_type_table[x].id & 0xffffff00))
752 if (family > id_to_type_table[x].id &&
753 last_family < id_to_type_table[x].id) {
754 last_family = id_to_type_table[x].id;
755 last_type = id_to_type_table[x].type;
756 }
757 }
758
759 /* If no match, return the default family */
760 if (last_type == -1)
761 return id_to_type_table[x].type;
762 return last_type;
763}
764
765static void usb_init_ipp(struct brcm_usb_init_params *params)
766{
767 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
768 u32 reg;
769 u32 orig_reg;
770
771 /* Starting with the 7445d0, there are no longer separate 3.0
772 * versions of IOC and IPP.
773 */
774 if (USB_CTRL_MASK_FAMILY(params, USB30_CTL1, USB3_IOC)) {
775 if (params->ioc)
776 USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IOC);
777 if (params->ipp == 1)
778 USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP);
779 }
780
781 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
782 orig_reg = reg;
783 if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL))
784 /* Never use the strap, it's going away. */
785 reg &= ~(USB_CTRL_MASK_FAMILY(params,
786 SETUP,
787 STRAP_CC_DRD_MODE_ENABLE_SEL));
788 if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL))
789 /* override ipp strap pin (if it exits) */
790 if (params->ipp != 2)
791 reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP,
792 STRAP_IPP_SEL));
793
794 /* Override the default OC and PP polarity */
795 reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC));
796 if (params->ioc)
797 reg |= USB_CTRL_MASK(SETUP, IOC);
798 if (params->ipp == 1)
799 reg |= USB_CTRL_MASK(SETUP, IPP);
800 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
801
802 /*
803 * If we're changing IPP, make sure power is off long enough
804 * to turn off any connected devices.
805 */
806 if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP))
807 msleep(50);
808}
809
810static void usb_wake_enable(struct brcm_usb_init_params *params,
811 bool enable)
812{
813 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
814
815 if (enable)
816 USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN);
817 else
818 USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN);
819}
820
821static void usb_init_common(struct brcm_usb_init_params *params)
822{
823 u32 reg;
824 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
825
826 /* Clear any pending wake conditions */
827 usb_wake_enable(params, false);
828 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS));
829 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS));
830
831 /* Take USB out of power down */
832 if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) {
833 USB_CTRL_UNSET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN);
834 /* 1 millisecond - for USB clocks to settle down */
835 usleep_range(1000, 2000);
836 }
837
838 if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) {
839 USB_CTRL_UNSET_FAMILY(params, USB_PM, USB_PWRDN);
840 /* 1 millisecond - for USB clocks to settle down */
841 usleep_range(1000, 2000);
842 }
843
844 if (params->selected_family != BRCM_FAMILY_74371A0 &&
845 (BRCM_ID(params->family_id) != 0x7364))
846 /*
847 * HW7439-637: 7439a0 and its derivatives do not have large
848 * enough descriptor storage for this.
849 */
850 USB_CTRL_SET_FAMILY(params, SETUP, SS_EHCI64BIT_EN);
851
852 /* Block auto PLL suspend by USB2 PHY (Sasi) */
853 USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN);
854
855 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
856 if (params->selected_family == BRCM_FAMILY_7364A0)
857 /* Suppress overcurrent indication from USB30 ports for A0 */
858 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE);
859
860 brcmusb_usb_phy_ldo_fix(ctrl);
861 brcmusb_usb2_eye_fix(ctrl);
862
863 /*
864 * Make sure the second and third memory controller
865 * interfaces are enabled if they exist.
866 */
867 if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN))
868 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN);
869 if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN))
870 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN);
871 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
872
873 brcmusb_memc_fix(params);
874
875 if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
876 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
877 reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
878 PORT_MODE);
879 reg |= params->port_mode;
880 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
881 }
882 if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) {
883 switch (params->supported_port_modes) {
884 case USB_CTLR_MODE_HOST:
885 USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB);
886 break;
887 default:
888 USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB);
889 USB_CTRL_SET_FAMILY(params, USB_PM, BDC_SOFT_RESETB);
890 break;
891 }
892 }
893 if (USB_CTRL_MASK_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE)) {
894 if (params->supported_port_modes == USB_CTLR_MODE_TYPEC_PD)
895 USB_CTRL_SET_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE);
896 else
897 USB_CTRL_UNSET_FAMILY(params, SETUP,
898 CC_DRD_MODE_ENABLE);
899 }
900}
901
902static void usb_init_eohci(struct brcm_usb_init_params *params)
903{
904 u32 reg;
905 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
906
907 if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB))
908 USB_CTRL_SET_FAMILY(params, USB_PM, USB20_HC_RESETB);
909
910 if (params->selected_family == BRCM_FAMILY_7366C0)
911 /*
912 * Don't enable this so the memory controller doesn't read
913 * into memory holes. NOTE: This bit is low true on 7366C0.
914 */
915 USB_CTRL_SET(ctrl, EBRIDGE, ESTOP_SCB_REQ);
916
917 /* Setup the endian bits */
918 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
919 reg &= ~USB_CTRL_SETUP_ENDIAN_BITS;
920 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN);
921 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
922
923 if (params->selected_family == BRCM_FAMILY_7271A0)
924 /* Enable LS keep alive fix for certain keyboards */
925 USB_CTRL_SET(ctrl, OBRIDGE, LS_KEEP_ALIVE);
926
927 if (params->family_id == 0x72550000) {
928 /*
929 * Make the burst size 512 bytes to fix a hardware bug
930 * on the 7255a0. See HW7255-24.
931 */
932 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, EBRIDGE));
933 reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE);
934 reg |= 0x800;
935 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE));
936 }
937}
938
939static void usb_init_xhci(struct brcm_usb_init_params *params)
940{
941 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
942
943 USB_CTRL_UNSET(ctrl, USB30_PCTL, PHY3_IDDQ_OVERRIDE);
944 /* 1 millisecond - for USB clocks to settle down */
945 usleep_range(1000, 2000);
946
947 if (BRCM_ID(params->family_id) == 0x7366) {
948 /*
949 * The PHY3_SOFT_RESETB bits default to the wrong state.
950 */
951 USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB);
952 USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB_P1);
953 }
954
955 /*
956 * Kick start USB3 PHY
957 * Make sure it's low to insure a rising edge.
958 */
959 USB_CTRL_UNSET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START);
960 USB_CTRL_SET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START);
961
962 brcmusb_usb3_phy_workarounds(params);
963 brcmusb_xhci_soft_reset(params, 0);
964 brcmusb_usb3_otp_fix(params);
965}
966
967static void usb_uninit_common(struct brcm_usb_init_params *params)
968{
969 if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN))
970 USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN);
971
972 if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN))
973 USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN);
974 if (params->wake_enabled)
975 usb_wake_enable(params, true);
976}
977
978static void usb_uninit_eohci(struct brcm_usb_init_params *params)
979{
980}
981
982static void usb_uninit_xhci(struct brcm_usb_init_params *params)
983{
984 brcmusb_xhci_soft_reset(params, 1);
985 USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_PCTL,
986 PHY3_IDDQ_OVERRIDE);
987}
988
989static int usb_get_dual_select(struct brcm_usb_init_params *params)
990{
991 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
992 u32 reg = 0;
993
994 pr_debug("%s\n", __func__);
995 if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
996 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
997 reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
998 PORT_MODE);
999 }
1000 return reg;
1001}
1002
1003static void usb_set_dual_select(struct brcm_usb_init_params *params)
1004{
1005 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
1006 u32 reg;
1007
1008 pr_debug("%s\n", __func__);
1009
1010 if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
1011 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
1012 reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
1013 PORT_MODE);
1014 reg |= params->port_mode;
1015 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
1016 }
1017}
1018
1019static const struct brcm_usb_init_ops bcm7445_ops = {
1020 .init_ipp = usb_init_ipp,
1021 .init_common = usb_init_common,
1022 .init_eohci = usb_init_eohci,
1023 .init_xhci = usb_init_xhci,
1024 .uninit_common = usb_uninit_common,
1025 .uninit_eohci = usb_uninit_eohci,
1026 .uninit_xhci = usb_uninit_xhci,
1027 .get_dual_select = usb_get_dual_select,
1028 .set_dual_select = usb_set_dual_select,
1029};
1030
1031void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params)
1032{
1033 int fam;
1034
1035 fam = BRCM_FAMILY_4908;
1036 params->selected_family = fam;
1037 params->usb_reg_bits_map =
1038 &usb_reg_bits_map_table[fam][0];
1039 params->family_name = family_names[fam];
1040 params->ops = &bcm7445_ops;
1041}
1042
1043void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params)
1044{
1045 int fam;
1046
1047 pr_debug("%s\n", __func__);
1048
1049 fam = get_family_type(params);
1050 params->selected_family = fam;
1051 params->usb_reg_bits_map =
1052 &usb_reg_bits_map_table[fam][0];
1053 params->family_name = family_names[fam];
1054 params->ops = &bcm7445_ops;
1055}