Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.15.
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * Copyright (c) 2018 HiSilicon Technologies Co., Ltd.
  4 */
  5
  6#include <linux/clk.h>
  7#include <linux/mfd/syscon.h>
  8#include <linux/mmc/host.h>
  9#include <linux/module.h>
 10#include <linux/of_address.h>
 11#include <linux/platform_device.h>
 12#include <linux/pm_runtime.h>
 13#include <linux/regmap.h>
 14#include <linux/regulator/consumer.h>
 15
 16#include "dw_mmc.h"
 17#include "dw_mmc-pltfm.h"
 18
 19#define ALL_INT_CLR		0x1ffff
 20
 21struct hi3798cv200_priv {
 22	struct clk *sample_clk;
 23	struct clk *drive_clk;
 24};
 25
 26static void dw_mci_hi3798cv200_set_ios(struct dw_mci *host, struct mmc_ios *ios)
 27{
 28	struct hi3798cv200_priv *priv = host->priv;
 29	u32 val;
 30
 31	val = mci_readl(host, UHS_REG);
 32	if (ios->timing == MMC_TIMING_MMC_DDR52 ||
 33	    ios->timing == MMC_TIMING_UHS_DDR50)
 34		val |= SDMMC_UHS_DDR;
 35	else
 36		val &= ~SDMMC_UHS_DDR;
 37	mci_writel(host, UHS_REG, val);
 38
 39	val = mci_readl(host, ENABLE_SHIFT);
 40	if (ios->timing == MMC_TIMING_MMC_DDR52)
 41		val |= SDMMC_ENABLE_PHASE;
 42	else
 43		val &= ~SDMMC_ENABLE_PHASE;
 44	mci_writel(host, ENABLE_SHIFT, val);
 45
 46	val = mci_readl(host, DDR_REG);
 47	if (ios->timing == MMC_TIMING_MMC_HS400)
 48		val |= SDMMC_DDR_HS400;
 49	else
 50		val &= ~SDMMC_DDR_HS400;
 51	mci_writel(host, DDR_REG, val);
 52
 53	if (ios->timing == MMC_TIMING_MMC_HS ||
 54	    ios->timing == MMC_TIMING_LEGACY)
 55		clk_set_phase(priv->drive_clk, 180);
 56	else if (ios->timing == MMC_TIMING_MMC_HS200)
 57		clk_set_phase(priv->drive_clk, 135);
 58}
 59
 60static int dw_mci_hi3798cv200_execute_tuning(struct dw_mci_slot *slot,
 61					     u32 opcode)
 62{
 63	static const int degrees[] = { 0, 45, 90, 135, 180, 225, 270, 315 };
 64	struct dw_mci *host = slot->host;
 65	struct hi3798cv200_priv *priv = host->priv;
 66	int raise_point = -1, fall_point = -1;
 67	int err, prev_err = -1;
 68	int found = 0;
 69	int i;
 70
 71	for (i = 0; i < ARRAY_SIZE(degrees); i++) {
 72		clk_set_phase(priv->sample_clk, degrees[i]);
 73		mci_writel(host, RINTSTS, ALL_INT_CLR);
 74
 75		err = mmc_send_tuning(slot->mmc, opcode, NULL);
 76		if (!err)
 77			found = 1;
 78
 79		if (i > 0) {
 80			if (err && !prev_err)
 81				fall_point = i - 1;
 82			if (!err && prev_err)
 83				raise_point = i;
 84		}
 85
 86		if (raise_point != -1 && fall_point != -1)
 87			goto tuning_out;
 88
 89		prev_err = err;
 90		err = 0;
 91	}
 92
 93tuning_out:
 94	if (found) {
 95		if (raise_point == -1)
 96			raise_point = 0;
 97		if (fall_point == -1)
 98			fall_point = ARRAY_SIZE(degrees) - 1;
 99		if (fall_point < raise_point) {
100			if ((raise_point + fall_point) >
101			    (ARRAY_SIZE(degrees) - 1))
102				i = fall_point / 2;
103			else
104				i = (raise_point + ARRAY_SIZE(degrees) - 1) / 2;
105		} else {
106			i = (raise_point + fall_point) / 2;
107		}
108
109		clk_set_phase(priv->sample_clk, degrees[i]);
110		dev_dbg(host->dev, "Tuning clk_sample[%d, %d], set[%d]\n",
111			raise_point, fall_point, degrees[i]);
112	} else {
113		dev_err(host->dev, "No valid clk_sample shift! use default\n");
114		err = -EINVAL;
115	}
116
117	mci_writel(host, RINTSTS, ALL_INT_CLR);
118	return err;
119}
120
121static int dw_mci_hi3798cv200_init(struct dw_mci *host)
122{
123	struct hi3798cv200_priv *priv;
124	int ret;
125
126	priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
127	if (!priv)
128		return -ENOMEM;
129
130	priv->sample_clk = devm_clk_get(host->dev, "ciu-sample");
131	if (IS_ERR(priv->sample_clk)) {
132		dev_err(host->dev, "failed to get ciu-sample clock\n");
133		return PTR_ERR(priv->sample_clk);
134	}
135
136	priv->drive_clk = devm_clk_get(host->dev, "ciu-drive");
137	if (IS_ERR(priv->drive_clk)) {
138		dev_err(host->dev, "failed to get ciu-drive clock\n");
139		return PTR_ERR(priv->drive_clk);
140	}
141
142	ret = clk_prepare_enable(priv->sample_clk);
143	if (ret) {
144		dev_err(host->dev, "failed to enable ciu-sample clock\n");
145		return ret;
146	}
147
148	ret = clk_prepare_enable(priv->drive_clk);
149	if (ret) {
150		dev_err(host->dev, "failed to enable ciu-drive clock\n");
151		goto disable_sample_clk;
152	}
153
154	host->priv = priv;
155	return 0;
156
157disable_sample_clk:
158	clk_disable_unprepare(priv->sample_clk);
159	return ret;
160}
161
162static const struct dw_mci_drv_data hi3798cv200_data = {
163	.common_caps = MMC_CAP_CMD23,
164	.init = dw_mci_hi3798cv200_init,
165	.set_ios = dw_mci_hi3798cv200_set_ios,
166	.execute_tuning = dw_mci_hi3798cv200_execute_tuning,
167};
168
169static int dw_mci_hi3798cv200_probe(struct platform_device *pdev)
170{
171	return dw_mci_pltfm_register(pdev, &hi3798cv200_data);
172}
173
174static int dw_mci_hi3798cv200_remove(struct platform_device *pdev)
175{
176	struct dw_mci *host = platform_get_drvdata(pdev);
177	struct hi3798cv200_priv *priv = host->priv;
178
179	clk_disable_unprepare(priv->drive_clk);
180	clk_disable_unprepare(priv->sample_clk);
181
182	dw_mci_pltfm_remove(pdev);
183
184	return 0;
185}
186
187static const struct of_device_id dw_mci_hi3798cv200_match[] = {
188	{ .compatible = "hisilicon,hi3798cv200-dw-mshc", },
189	{},
190};
191
192MODULE_DEVICE_TABLE(of, dw_mci_hi3798cv200_match);
193static struct platform_driver dw_mci_hi3798cv200_driver = {
194	.probe = dw_mci_hi3798cv200_probe,
195	.remove = dw_mci_hi3798cv200_remove,
196	.driver = {
197		.name = "dwmmc_hi3798cv200",
198		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
199		.of_match_table = dw_mci_hi3798cv200_match,
200	},
201};
202module_platform_driver(dw_mci_hi3798cv200_driver);
203
204MODULE_DESCRIPTION("HiSilicon Hi3798CV200 Specific DW-MSHC Driver Extension");
205MODULE_LICENSE("GPL v2");
206MODULE_ALIAS("platform:dwmmc_hi3798cv200");