Loading...
Note: File does not exist in v6.2.
1/*
2 * Copyright (C) 2000 Deep Blue Solutions Ltd
3 * Copyright (C) 2002 Shane Nay (shane@minirl.com)
4 * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 */
16#include <linux/gpio.h>
17#include <linux/platform_device.h>
18#include <linux/mtd/mtd.h>
19#include <linux/mtd/map.h>
20#include <linux/mtd/partitions.h>
21#include <linux/mtd/physmap.h>
22#include <linux/i2c.h>
23#include <linux/irq.h>
24
25#include <linux/regulator/fixed.h>
26#include <linux/regulator/machine.h>
27
28#include <asm/mach-types.h>
29#include <asm/mach/arch.h>
30#include <asm/mach/time.h>
31#include <asm/mach/map.h>
32
33#include "common.h"
34#include "devices-imx27.h"
35#include "hardware.h"
36#include "iomux-mx27.h"
37
38/*
39 * Base address of PBC controller, CS4
40 */
41#define PBC_BASE_ADDRESS 0xf4300000
42#define PBC_REG_ADDR(offset) (void __force __iomem *) \
43 (PBC_BASE_ADDRESS + (offset))
44
45/* When the PBC address connection is fixed in h/w, defined as 1 */
46#define PBC_ADDR_SH 0
47
48/* Offsets for the PBC Controller register */
49/*
50 * PBC Board version register offset
51 */
52#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
53/*
54 * PBC Board control register 1 set address.
55 */
56#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
57/*
58 * PBC Board control register 1 clear address.
59 */
60#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
61
62/* PBC Board Control Register 1 bit definitions */
63#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */
64
65/* to determine the correct external crystal reference */
66#define CKIH_27MHZ_BIT_SET (1 << 3)
67
68static const int mx27ads_pins[] __initconst = {
69 /* UART0 */
70 PE12_PF_UART1_TXD,
71 PE13_PF_UART1_RXD,
72 PE14_PF_UART1_CTS,
73 PE15_PF_UART1_RTS,
74 /* UART1 */
75 PE3_PF_UART2_CTS,
76 PE4_PF_UART2_RTS,
77 PE6_PF_UART2_TXD,
78 PE7_PF_UART2_RXD,
79 /* UART2 */
80 PE8_PF_UART3_TXD,
81 PE9_PF_UART3_RXD,
82 PE10_PF_UART3_CTS,
83 PE11_PF_UART3_RTS,
84 /* UART3 */
85 PB26_AF_UART4_RTS,
86 PB28_AF_UART4_TXD,
87 PB29_AF_UART4_CTS,
88 PB31_AF_UART4_RXD,
89 /* UART4 */
90 PB18_AF_UART5_TXD,
91 PB19_AF_UART5_RXD,
92 PB20_AF_UART5_CTS,
93 PB21_AF_UART5_RTS,
94 /* UART5 */
95 PB10_AF_UART6_TXD,
96 PB12_AF_UART6_CTS,
97 PB11_AF_UART6_RXD,
98 PB13_AF_UART6_RTS,
99 /* FEC */
100 PD0_AIN_FEC_TXD0,
101 PD1_AIN_FEC_TXD1,
102 PD2_AIN_FEC_TXD2,
103 PD3_AIN_FEC_TXD3,
104 PD4_AOUT_FEC_RX_ER,
105 PD5_AOUT_FEC_RXD1,
106 PD6_AOUT_FEC_RXD2,
107 PD7_AOUT_FEC_RXD3,
108 PD8_AF_FEC_MDIO,
109 PD9_AIN_FEC_MDC,
110 PD10_AOUT_FEC_CRS,
111 PD11_AOUT_FEC_TX_CLK,
112 PD12_AOUT_FEC_RXD0,
113 PD13_AOUT_FEC_RX_DV,
114 PD14_AOUT_FEC_RX_CLK,
115 PD15_AOUT_FEC_COL,
116 PD16_AIN_FEC_TX_ER,
117 PF23_AIN_FEC_TX_EN,
118 /* I2C2 */
119 PC5_PF_I2C2_SDA,
120 PC6_PF_I2C2_SCL,
121 /* FB */
122 PA5_PF_LSCLK,
123 PA6_PF_LD0,
124 PA7_PF_LD1,
125 PA8_PF_LD2,
126 PA9_PF_LD3,
127 PA10_PF_LD4,
128 PA11_PF_LD5,
129 PA12_PF_LD6,
130 PA13_PF_LD7,
131 PA14_PF_LD8,
132 PA15_PF_LD9,
133 PA16_PF_LD10,
134 PA17_PF_LD11,
135 PA18_PF_LD12,
136 PA19_PF_LD13,
137 PA20_PF_LD14,
138 PA21_PF_LD15,
139 PA22_PF_LD16,
140 PA23_PF_LD17,
141 PA24_PF_REV,
142 PA25_PF_CLS,
143 PA26_PF_PS,
144 PA27_PF_SPL_SPR,
145 PA28_PF_HSYNC,
146 PA29_PF_VSYNC,
147 PA30_PF_CONTRAST,
148 PA31_PF_OE_ACD,
149 /* OWIRE */
150 PE16_AF_OWIRE,
151 /* SDHC1*/
152 PE18_PF_SD1_D0,
153 PE19_PF_SD1_D1,
154 PE20_PF_SD1_D2,
155 PE21_PF_SD1_D3,
156 PE22_PF_SD1_CMD,
157 PE23_PF_SD1_CLK,
158 /* SDHC2*/
159 PB4_PF_SD2_D0,
160 PB5_PF_SD2_D1,
161 PB6_PF_SD2_D2,
162 PB7_PF_SD2_D3,
163 PB8_PF_SD2_CMD,
164 PB9_PF_SD2_CLK,
165};
166
167static const struct mxc_nand_platform_data
168mx27ads_nand_board_info __initconst = {
169 .width = 1,
170 .hw_ecc = 1,
171};
172
173/* ADS's NOR flash */
174static struct physmap_flash_data mx27ads_flash_data = {
175 .width = 2,
176};
177
178static struct resource mx27ads_flash_resource = {
179 .start = 0xc0000000,
180 .end = 0xc0000000 + 0x02000000 - 1,
181 .flags = IORESOURCE_MEM,
182
183};
184
185static struct platform_device mx27ads_nor_mtd_device = {
186 .name = "physmap-flash",
187 .id = 0,
188 .dev = {
189 .platform_data = &mx27ads_flash_data,
190 },
191 .num_resources = 1,
192 .resource = &mx27ads_flash_resource,
193};
194
195static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
196 .bitrate = 100000,
197};
198
199static struct i2c_board_info mx27ads_i2c_devices[] = {
200};
201
202static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value)
203{
204 if (value)
205 __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
206 else
207 __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
208}
209
210static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
211{
212 return 0;
213}
214
215#define MX27ADS_LCD_GPIO (6 * 32)
216
217static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer =
218 REGULATOR_SUPPLY("lcd", "imx-fb.0");
219
220static struct regulator_init_data mx27ads_lcd_regulator_init_data = {
221 .constraints = {
222 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
223},
224 .consumer_supplies = &mx27ads_lcd_regulator_consumer,
225 .num_consumer_supplies = 1,
226};
227
228static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
229 .supply_name = "LCD",
230 .microvolts = 3300000,
231 .gpio = MX27ADS_LCD_GPIO,
232 .init_data = &mx27ads_lcd_regulator_init_data,
233};
234
235static void __init mx27ads_regulator_init(void)
236{
237 struct gpio_chip *vchip;
238
239 vchip = kzalloc(sizeof(*vchip), GFP_KERNEL);
240 vchip->owner = THIS_MODULE;
241 vchip->label = "LCD";
242 vchip->base = MX27ADS_LCD_GPIO;
243 vchip->ngpio = 1;
244 vchip->direction_output = vgpio_dir_out;
245 vchip->set = vgpio_set;
246 gpiochip_add(vchip);
247
248 platform_device_register_data(&platform_bus, "reg-fixed-voltage",
249 PLATFORM_DEVID_AUTO,
250 &mx27ads_lcd_regulator_pdata,
251 sizeof(mx27ads_lcd_regulator_pdata));
252}
253
254static struct imx_fb_videomode mx27ads_modes[] = {
255 {
256 .mode = {
257 .name = "Sharp-LQ035Q7",
258 .refresh = 60,
259 .xres = 240,
260 .yres = 320,
261 .pixclock = 188679, /* in ps (5.3MHz) */
262 .hsync_len = 1,
263 .left_margin = 9,
264 .right_margin = 16,
265 .vsync_len = 1,
266 .upper_margin = 7,
267 .lower_margin = 9,
268 },
269 .bpp = 16,
270 .pcr = 0xFB008BC0,
271 },
272};
273
274static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
275 .mode = mx27ads_modes,
276 .num_modes = ARRAY_SIZE(mx27ads_modes),
277
278 /*
279 * - HSYNC active high
280 * - VSYNC active high
281 * - clk notenabled while idle
282 * - clock inverted
283 * - data not inverted
284 * - data enable low active
285 * - enable sharp mode
286 */
287 .pwmr = 0x00A903FF,
288 .lscr1 = 0x00120300,
289 .dmacr = 0x00020010,
290};
291
292static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
293 void *data)
294{
295 return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq,
296 IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
297}
298
299static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
300 void *data)
301{
302 return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq,
303 IRQF_TRIGGER_RISING, "sdhc2-card-detect", data);
304}
305
306static void mx27ads_sdhc1_exit(struct device *dev, void *data)
307{
308 free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data);
309}
310
311static void mx27ads_sdhc2_exit(struct device *dev, void *data)
312{
313 free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data);
314}
315
316static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
317 .init = mx27ads_sdhc1_init,
318 .exit = mx27ads_sdhc1_exit,
319};
320
321static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
322 .init = mx27ads_sdhc2_init,
323 .exit = mx27ads_sdhc2_exit,
324};
325
326static struct platform_device *platform_devices[] __initdata = {
327 &mx27ads_nor_mtd_device,
328};
329
330static const struct imxuart_platform_data uart_pdata __initconst = {
331 .flags = IMXUART_HAVE_RTSCTS,
332};
333
334static void __init mx27ads_board_init(void)
335{
336 imx27_soc_init();
337
338 mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
339 "mx27ads");
340
341 imx27_add_imx_uart0(&uart_pdata);
342 imx27_add_imx_uart1(&uart_pdata);
343 imx27_add_imx_uart2(&uart_pdata);
344 imx27_add_imx_uart3(&uart_pdata);
345 imx27_add_imx_uart4(&uart_pdata);
346 imx27_add_imx_uart5(&uart_pdata);
347 imx27_add_mxc_nand(&mx27ads_nand_board_info);
348
349 /* only the i2c master 1 is used on this CPU card */
350 i2c_register_board_info(1, mx27ads_i2c_devices,
351 ARRAY_SIZE(mx27ads_i2c_devices));
352 imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
353 mx27ads_regulator_init();
354 imx27_add_imx_fb(&mx27ads_fb_data);
355 imx27_add_mxc_mmc(0, &sdhc1_pdata);
356 imx27_add_mxc_mmc(1, &sdhc2_pdata);
357
358 imx27_add_fec(NULL);
359 platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
360 imx27_add_mxc_w1();
361}
362
363static void __init mx27ads_timer_init(void)
364{
365 unsigned long fref = 26000000;
366
367 if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
368 fref = 27000000;
369
370 mx27_clocks_init(fref);
371}
372
373static struct map_desc mx27ads_io_desc[] __initdata = {
374 {
375 .virtual = PBC_BASE_ADDRESS,
376 .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
377 .length = SZ_1M,
378 .type = MT_DEVICE,
379 },
380};
381
382static void __init mx27ads_map_io(void)
383{
384 mx27_map_io();
385 iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
386}
387
388MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
389 /* maintainer: Freescale Semiconductor, Inc. */
390 .atag_offset = 0x100,
391 .map_io = mx27ads_map_io,
392 .init_early = imx27_init_early,
393 .init_irq = mx27_init_irq,
394 .handle_irq = imx27_handle_irq,
395 .init_time = mx27ads_timer_init,
396 .init_machine = mx27ads_board_init,
397 .restart = mxc_restart,
398MACHINE_END