1/*
  2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
  3 *
  4 * This file is dual-licensed: you can use it either under the terms
  5 * of the GPL or the X11 license, at your option. Note that this dual
  6 * licensing only applies to this file, and not this project as a
  7 * whole.
  8 *
  9 *  a) This file is free software; you can redistribute it and/or
 10 *     modify it under the terms of the GNU General Public License as
 11 *     published by the Free Software Foundation; either version 2 of the
 12 *     License, or (at your option) any later version.
 13 *
 14 *     This file is distributed in the hope that it will be useful,
 15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 17 *     GNU General Public License for more details.
 18 *
 19 * Or, alternatively,
 20 *
 21 *  b) Permission is hereby granted, free of charge, to any person
 22 *     obtaining a copy of this software and associated documentation
 23 *     files (the "Software"), to deal in the Software without
 24 *     restriction, including without limitation the rights to use,
 25 *     copy, modify, merge, publish, distribute, sublicense, and/or
 26 *     sell copies of the Software, and to permit persons to whom the
 27 *     Software is furnished to do so, subject to the following
 28 *     conditions:
 29 *
 30 *     The above copyright notice and this permission notice shall be
 31 *     included in all copies or substantial portions of the Software.
 32 *
 33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 40 *     OTHER DEALINGS IN THE SOFTWARE.
 41 */
 42
 43/dts-v1/;
 44#include "sun5i-a10s.dtsi"
 45#include "sunxi-common-regulators.dtsi"
 46#include <dt-bindings/gpio/gpio.h>
 47
 48/ {
 49	model = "MK802-A10s";
 50	compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
 51
 52	aliases {
 53		serial0 = &uart0;
 54	};
 55
 56	chosen {
 57		stdout-path = "serial0:115200n8";
 58	};
 59
 60	leds {
 61		compatible = "gpio-leds";
 62
 63		led {
 64			label = "mk802:red:usr";
 65			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 66		};
 67	};
 68};
 69
 70&ehci0 {
 71	status = "okay";
 72};
 73
 74&i2c0 {
 75	status = "okay";
 76
 77	axp152: pmic@30 {
 78		compatible = "x-powers,axp152";
 79		reg = <0x30>;
 80		interrupts = <0>;
 81		interrupt-controller;
 82		#interrupt-cells = <1>;
 83	};
 84};
 85
 86&mmc0 {
 87	vmmc-supply = <&reg_vcc3v3>;
 88	bus-width = <4>;
 89	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
 90	status = "okay";
 91};
 92
 93&mmc1 {
 94	vmmc-supply = <&reg_vcc3v3>;
 95	bus-width = <4>;
 96	non-removable;
 97	status = "okay";
 98};
 99
100&ohci0 {
101	status = "okay";
102};
103
104&otg_sram {
105	status = "okay";
106};
107
108&reg_usb1_vbus {
109	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
110	status = "okay";
111};
112
113&uart0 {
114	pinctrl-names = "default";
115	pinctrl-0 = <&uart0_pb_pins>;
116	status = "okay";
117};
118
119&usb_otg {
120	dr_mode = "peripheral";
121	status = "okay";
122};
123
124&usbphy {
125	usb1_vbus-supply = <&reg_usb1_vbus>;
126	status = "okay";
127};