1// SPDX-License-Identifier: GPL-2.0+
 2/*
 3 * Device Tree include file for QNAP TS41X
 4 *
 5 * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
 
 
 
 
 
 6 */
 7
 8/ {
 9	model = "QNAP TS419 family";
10	compatible = "qnap,ts419", "marvell,kirkwood";
11
12	ocp@f1000000 {
13		pinctrl: pin-controller@10000 {
14			pinctrl-names = "default";
15
16			pmx_USB_copy_button: pmx-USB-copy-button {
17				marvell,pins = "mpp43";
18				marvell,function = "gpio";
19			};
20			pmx_reset_button: pmx-reset-button {
21				marvell,pins = "mpp37";
22				marvell,function = "gpio";
23			};
24			/*
25			 * JP1 indicates if an LCD module is installed
26			 * on the serial port (0), or if the port is used
27			 * as a console (1).
28			 */
29			pmx_jumper_jp1: pmx-jumper_jp1 {
30				marvell,pins = "mpp45";
31				marvell,function = "gpio";
32			};
33
34		};
35	};
36
37	gpio_keys {
38		compatible = "gpio-keys";
39		#address-cells = <1>;
40		#size-cells = <0>;
41		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
42		pinctrl-names = "default";
43
44		copy {
45			label = "USB Copy";
46			linux,code = <KEY_COPY>;
47			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
48		};
49		reset {
50			label = "Reset";
51			linux,code = <KEY_RESTART>;
52			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
53		};
54	};
55};
56
57&mdio {
58	status = "okay";
59
60	ethphy1: ethernet-phy@1 {
61		device_type = "ethernet-phy";
62                /* overwrite reg property in board file */
63	};
64};
65
66&eth1 {
67	status = "okay";
68	ethernet1-port@0 {
69		phy-handle = <&ethphy1>;
70	};
71};

 
 1/*
 2 * Device Tree include file for QNAP TS41X
 3 *
 4 * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
 5 *
 6 * This program is free software; you can redistribute it and/or
 7 * modify it under the terms of the GNU General Public License
 8 * as published by the Free Software Foundation; either version
 9 * 2 of the License, or (at your option) any later version.
10 */
11
12/ {
13	model = "QNAP TS419 family";
14	compatible = "qnap,ts419", "marvell,kirkwood";
15
16	ocp@f1000000 {
17		pinctrl: pinctrl@10000 {
18			pinctrl-names = "default";
19
20			pmx_USB_copy_button: pmx-USB-copy-button {
21				marvell,pins = "mpp43";
22				marvell,function = "gpio";
23			};
24			pmx_reset_button: pmx-reset-button {
25				marvell,pins = "mpp37";
26				marvell,function = "gpio";
27			};
28			/*
29			 * JP1 indicates if an LCD module is installed
30			 * on the serial port (0), or if the port is used
31			 * as a console (1).
32			 */
33			pmx_jumper_jp1: pmx-jumper_jp1 {
34				marvell,pins = "mpp45";
35				marvell,function = "gpio";
36			};
37
38		};
39	};
40
41	gpio_keys {
42		compatible = "gpio-keys";
43		#address-cells = <1>;
44		#size-cells = <0>;
45		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
46		pinctrl-names = "default";
47
48		button@1 {
49			label = "USB Copy";
50			linux,code = <KEY_COPY>;
51			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
52		};
53		button@2 {
54			label = "Reset";
55			linux,code = <KEY_RESTART>;
56			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
57		};
58	};
59};
60
61&mdio {
62	status = "okay";
63
64	ethphy1: ethernet-phy@1 {
65		device_type = "ethernet-phy";
66                /* overwrite reg property in board file */
67	};
68};
69
70&eth1 {
71	status = "okay";
72	ethernet1-port@0 {
73		phy-handle = <&ethphy1>;
74	};
75};