1#include "kirkwood.dtsi"
  2#include "kirkwood-6281.dtsi"
  3
  4/ {
  5	model = "ZyXEL NSA310";
  6
  7	mbus {
  8		pcie-controller {
  9			status = "okay";
 10
 11			pcie@1,0 {
 12				status = "okay";
 13			};
 14		};
 15	};
 16
 17	ocp@f1000000 {
 18		pinctrl: pinctrl@10000 {
 19
 20			pmx_usb_power_off: pmx-usb-power-off {
 21				marvell,pins = "mpp21";
 22				marvell,function = "gpio";
 23			};
 24			pmx_pwr_off: pmx-pwr-off {
 25				marvell,pins = "mpp48";
 26				marvell,function = "gpio";
 27			};
 28
 29		};
 30
 31		serial@12000 {
 32			status = "ok";
 33		};
 34
 35		sata@80000 {
 36			status = "okay";
 37			nr-ports = <2>;
 38		};
 39	};
 40
 41	gpio_poweroff {
 42		compatible = "gpio-poweroff";
 43		pinctrl-0 = <&pmx_pwr_off>;
 44		pinctrl-names = "default";
 45		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 46	};
 47
 48	regulators {
 49		compatible = "simple-bus";
 50		#address-cells = <1>;
 51		#size-cells = <0>;
 52		pinctrl-0 = <&pmx_usb_power_off>;
 53		pinctrl-names = "default";
 54
 55		usb0_power_off: regulator@1 {
 56			compatible = "regulator-fixed";
 57			reg = <1>;
 58			regulator-name = "USB Power Off";
 59			regulator-min-microvolt = <5000000>;
 60			regulator-max-microvolt = <5000000>;
 61			regulator-always-on;
 62			regulator-boot-on;
 63			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
 64		};
 65	};
 66};
 67
 68&nand {
 69	status = "okay";
 70	chip-delay = <35>;
 71
 72	partition@0 {
 73		label = "uboot";
 74		reg = <0x0000000 0x0100000>;
 75		read-only;
 76	};
 77	partition@100000 {
 78		label = "uboot_env";
 79		reg = <0x0100000 0x0080000>;
 80	};
 81	partition@180000 {
 82		label = "key_store";
 83		reg = <0x0180000 0x0080000>;
 84	};
 85	partition@200000 {
 86		label = "info";
 87		reg = <0x0200000 0x0080000>;
 88	};
 89	partition@280000 {
 90		label = "etc";
 91		reg = <0x0280000 0x0a00000>;
 92	};
 93	partition@c80000 {
 94		label = "kernel_1";
 95		reg = <0x0c80000 0x0a00000>;
 96	};
 97	partition@1680000 {
 98		label = "rootfs1";
 99		reg = <0x1680000 0x2fc0000>;
100	};
101	partition@4640000 {
102		label = "kernel_2";
103		reg = <0x4640000 0x0a00000>;
104	};
105	partition@5040000 {
106		label = "rootfs2";
107		reg = <0x5040000 0x2fc0000>;
108	};
109};