Loading...
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6281.dtsi"
6
7/ {
8 model = "MPL CEC4";
9 compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
10
11 memory {
12 device_type = "memory";
13 reg = <0x00000000 0x20000000>;
14 };
15
16 chosen {
17 bootargs = "console=ttyS0,115200n8 earlyprintk";
18 stdout-path = &uart0;
19 };
20
21 ocp@f1000000 {
22 pinctrl: pin-controller@10000 {
23 pmx_led_health: pmx-led-health {
24 marvell,pins = "mpp7";
25 marvell,function = "gpo";
26 };
27
28 pmx_sata1: pmx-sata1 {
29 marvell,pins = "mpp34";
30 marvell,function = "sata1";
31 };
32
33 pmx_sata0: pmx-sata0 {
34 marvell,pins = "mpp35";
35 marvell,function = "sata0";
36 };
37
38 pmx_led_user1o: pmx-led-user1o {
39 marvell,pins = "mpp40";
40 marvell,function = "gpio";
41 };
42
43 pmx_led_user1g: pmx-led-user1g {
44 marvell,pins = "mpp41";
45 marvell,function = "gpio";
46 };
47
48 pmx_led_user0o: pmx-led-user0o {
49 marvell,pins = "mpp44";
50 marvell,function = "gpio";
51 };
52
53 pmx_led_user0g: pmx-led-user0g {
54 marvell,pins = "mpp45";
55 marvell,function = "gpio";
56 };
57
58 pmx_led_misc: pmx-led-misc {
59 marvell,pins = "mpp46";
60 marvell,function = "gpio";
61 };
62
63 pmx_sdio_cd: pmx-sdio-cd {
64 marvell,pins = "mpp47";
65 marvell,function = "gpio";
66 };
67 };
68
69 i2c@11000 {
70 status = "okay";
71
72 rtc@51 {
73 compatible = "nxp,pcf8563";
74 reg = <0x51>;
75 };
76
77 eeprom@57 {
78 compatible = "atmel,24c02";
79 reg = <0x57>;
80 };
81
82 };
83
84 serial@12000 {
85 status = "okay";
86 };
87
88 rtc@10300 {
89 status = "disabled";
90 };
91
92 sata@80000 {
93 pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
94 pinctrl-names = "default";
95 nr-ports = <2>;
96 status = "okay";
97 };
98
99 mvsdio@90000 {
100 pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
101 pinctrl-names = "default";
102 status = "okay";
103 cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
104 /* No WP GPIO */
105 };
106 };
107
108 gpio-leds {
109 compatible = "gpio-leds";
110 pinctrl-0 = < &pmx_led_health
111 &pmx_led_user1o
112 &pmx_led_user1g &pmx_led_user0o
113 &pmx_led_user0g &pmx_led_misc
114 >;
115 pinctrl-names = "default";
116
117 health {
118 label = "status:green:health";
119 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
120 };
121
122 user1o {
123 label = "user1:orange";
124 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
125 default-state = "on";
126 };
127
128 user1g {
129 label = "user1:green";
130 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
131 default-state = "on";
132 };
133
134 user0o {
135 label = "user0:orange";
136 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
137 default-state = "on";
138 };
139
140 user0g {
141 label = "user0:green";
142 gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
143 default-state = "on";
144 };
145
146 misc {
147 label = "status:orange:misc";
148 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
149 default-state = "on";
150 };
151
152 };
153};
154
155&nand {
156 status = "okay";
157
158 partition@0 {
159 label = "uboot";
160 reg = <0x0000000 0x100000>;
161 };
162
163 partition@100000 {
164 label = "env";
165 reg = <0x100000 0x80000>;
166 };
167
168 partition@180000 {
169 label = "fdt";
170 reg = <0x180000 0x80000>;
171 };
172
173 partition@200000 {
174 label = "kernel";
175 reg = <0x200000 0x400000>;
176 };
177
178 partition@600000 {
179 label = "rootfs";
180 reg = <0x600000 0x1fa00000>;
181 };
182};
183
184&mdio {
185 status = "okay";
186
187 ethphy0: ethernet-phy@1 {
188 reg = <1>;
189 };
190
191 ethphy1: ethernet-phy@2 {
192 reg = <2>;
193 };
194};
195
196ð0 {
197 status = "okay";
198 ethernet0-port@0 {
199 phy-handle = <ðphy0>;
200 };
201};
202
203ð1 {
204 status = "okay";
205 ethernet1-port@0 {
206 phy-handle = <ðphy1>;
207 };
208};
209
210&pciec {
211 status = "okay";
212};
213
214&pcie0 {
215 status = "okay";
216};
1/dts-v1/;
2
3#include "kirkwood.dtsi"
4#include "kirkwood-6281.dtsi"
5
6/ {
7 model = "MPL CEC4";
8 compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
9
10 memory {
11 device_type = "memory";
12 reg = <0x00000000 0x20000000>;
13 };
14
15 chosen {
16 bootargs = "console=ttyS0,115200n8 earlyprintk";
17 };
18
19 mbus {
20 pcie-controller {
21 status = "okay";
22
23 pcie@1,0 {
24 status = "okay";
25 };
26 };
27 };
28
29 ocp@f1000000 {
30 pinctrl: pinctrl@10000 {
31 pmx_led_health: pmx-led-health {
32 marvell,pins = "mpp7";
33 marvell,function = "gpo";
34 };
35
36 pmx_sata1: pmx-sata1 {
37 marvell,pins = "mpp34";
38 marvell,function = "sata1";
39 };
40
41 pmx_sata0: pmx-sata0 {
42 marvell,pins = "mpp35";
43 marvell,function = "sata0";
44 };
45
46 pmx_led_user1o: pmx-led-user1o {
47 marvell,pins = "mpp40";
48 marvell,function = "gpio";
49 };
50
51 pmx_led_user1g: pmx-led-user1g {
52 marvell,pins = "mpp41";
53 marvell,function = "gpio";
54 };
55
56 pmx_led_user0o: pmx-led-user0o {
57 marvell,pins = "mpp44";
58 marvell,function = "gpio";
59 };
60
61 pmx_led_user0g: pmx-led-user0g {
62 marvell,pins = "mpp45";
63 marvell,function = "gpio";
64 };
65
66 pmx_led_misc: pmx-led-misc {
67 marvell,pins = "mpp46";
68 marvell,function = "gpio";
69 };
70
71 pmx_sdio_cd: pmx-sdio-cd {
72 marvell,pins = "mpp47";
73 marvell,function = "gpio";
74 };
75 };
76
77 i2c@11000 {
78 status = "okay";
79
80 rtc@51 {
81 compatible = "nxp,pcf8563";
82 reg = <0x51>;
83 };
84
85 eeprom@57 {
86 compatible = "atmel,24c02";
87 reg = <0x57>;
88 };
89
90 };
91
92 serial@12000 {
93 status = "ok";
94 pinctrl-0 = <&pmx_uart0>;
95 pinctrl-names = "default";
96 };
97
98 rtc@10300 {
99 status = "disabled";
100 };
101
102 sata@80000 {
103 pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
104 pinctrl-names = "default";
105 nr-ports = <2>;
106 status = "okay";
107 };
108
109 mvsdio@90000 {
110 pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
111 pinctrl-names = "default";
112 status = "okay";
113 cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
114 /* No WP GPIO */
115 };
116 };
117
118 gpio-leds {
119 compatible = "gpio-leds";
120 pinctrl-0 = < &pmx_led_health
121 &pmx_led_user1o
122 &pmx_led_user1g &pmx_led_user0o
123 &pmx_led_user0g &pmx_led_misc
124 >;
125 pinctrl-names = "default";
126
127 health {
128 label = "status:green:health";
129 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
130 };
131
132 user1o {
133 label = "user1:orange";
134 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
135 default-state = "on";
136 };
137
138 user1g {
139 label = "user1:green";
140 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
141 default-state = "on";
142 };
143
144 user0o {
145 label = "user0:orange";
146 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
147 default-state = "on";
148 };
149
150 user0g {
151 label = "user0:green";
152 gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
153 default-state = "on";
154 };
155
156 misc {
157 label = "status:orange:misc";
158 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
159 default-state = "on";
160 };
161
162 };
163};
164
165&nand {
166 pinctrl-0 = <&pmx_nand>;
167 pinctrl-names = "default";
168 status = "okay";
169
170 partition@0 {
171 label = "uboot";
172 reg = <0x0000000 0x100000>;
173 };
174
175 partition@100000 {
176 label = "env";
177 reg = <0x100000 0x80000>;
178 };
179
180 partition@180000 {
181 label = "fdt";
182 reg = <0x180000 0x80000>;
183 };
184
185 partition@200000 {
186 label = "kernel";
187 reg = <0x200000 0x400000>;
188 };
189
190 partition@600000 {
191 label = "rootfs";
192 reg = <0x600000 0x1fa00000>;
193 };
194};
195
196&mdio {
197 status = "okay";
198
199 ethphy0: ethernet-phy@1 {
200 reg = <1>;
201 };
202
203 ethphy1: ethernet-phy@2 {
204 reg = <2>;
205 };
206};
207
208ð0 {
209 status = "okay";
210 ethernet0-port@0 {
211 phy-handle = <ðphy0>;
212 };
213};
214
215ð1 {
216 status = "okay";
217 ethernet1-port@0 {
218 phy-handle = <ðphy1>;
219 };
220};