Loading...
Note: File does not exist in v3.15.
1// SPDX-License-Identifier: ISC
2/*
3 * Device Tree file for Intel XScale Network Processors
4 * in the IXP45x and IXP46x series. This series has 64 interrupts and adds a
5 * few more peripherals over the 42x and 43x series so this extends the
6 * basic IXP4xx DTSI.
7 */
8#include "intel-ixp4xx.dtsi"
9
10/ {
11 soc {
12 bus@c4000000 {
13 compatible = "intel,ixp46x-expansion-bus-controller", "syscon";
14 /* Uses at least up to 0x124 */
15 reg = <0xc4000000 0x1000>;
16 };
17
18 rng@70002100 {
19 compatible = "intel,ixp46x-rng";
20 reg = <0x70002100 4>;
21 };
22
23 interrupt-controller@c8003000 {
24 compatible = "intel,ixp43x-interrupt";
25 };
26
27 /*
28 * This is the USB Device Mode (UDC) controller, which is used
29 * to present the IXP4xx as a device on a USB bus.
30 */
31 usb@c800b000 {
32 compatible = "intel,ixp4xx-udc";
33 reg = <0xc800b000 0x1000>;
34 interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
35 status = "disabled";
36 };
37
38 i2c@c8011000 {
39 compatible = "intel,ixp4xx-i2c";
40 reg = <0xc8011000 0x18>;
41 interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
42 status = "disabled";
43 };
44
45 /* This is known as EthB1 */
46 ethernet@c800d000 {
47 compatible = "intel,ixp4xx-ethernet";
48 reg = <0xc800d000 0x1000>;
49 status = "disabled";
50 intel,npe = <1>;
51 /* Dummy values that depend on firmware */
52 queue-rx = <&qmgr 0>;
53 queue-txready = <&qmgr 0>;
54 };
55
56 /* This is known as EthB2 */
57 ethernet@c800e000 {
58 compatible = "intel,ixp4xx-ethernet";
59 reg = <0xc800e000 0x1000>;
60 status = "disabled";
61 intel,npe = <2>;
62 /* Dummy values that depend on firmware */
63 queue-rx = <&qmgr 0>;
64 queue-txready = <&qmgr 0>;
65 };
66
67 /* This is known as EthB3 */
68 ethernet@c800f000 {
69 compatible = "intel,ixp4xx-ethernet";
70 reg = <0xc800f000 0x1000>;
71 status = "disabled";
72 intel,npe = <3>;
73 /* Dummy values that depend on firmware */
74 queue-rx = <&qmgr 0>;
75 queue-txready = <&qmgr 0>;
76 };
77
78 ptp-timer@c8010000 {
79 compatible = "intel,ixp46x-ptp-timer";
80 reg = <0xc8010000 0x1000>;
81 interrupt-parent = <&gpio0>;
82 interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>;
83 interrupt-names = "master", "slave";
84 };
85 };
86};