Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2012 Stefan Roese <sr@denx.de>
4 */
5
6/dts-v1/;
7/include/ "spear600.dtsi"
8
9/ {
10 model = "ST SPEAr600 Evaluation Board";
11 compatible = "st,spear600-evb", "st,spear600";
12 #address-cells = <1>;
13 #size-cells = <1>;
14
15 memory {
16 device_type = "memory";
17 reg = <0 0x10000000>;
18 };
19};
20
21&clcd {
22 status = "okay";
23};
24
25&dmac {
26 status = "okay";
27};
28
29&ehci_usb0 {
30 status = "okay";
31};
32
33&ehci_usb1 {
34 status = "okay";
35};
36
37&gmac {
38 phy-mode = "gmii";
39 status = "okay";
40};
41
42&ohci_usb0 {
43 status = "okay";
44};
45
46&ohci_usb1 {
47 status = "okay";
48};
49
50&smi {
51 status = "okay";
52 clock-rate = <50000000>;
53
54 flash@f8000000 {
55 reg = <0xf8000000 0x800000>;
56 st,smi-fast-mode;
57
58 partitions {
59 compatible = "fixed-partitions";
60 #address-cells = <1>;
61 #size-cells = <1>;
62
63 partition@0 {
64 label = "xloader";
65 reg = <0x0 0x10000>;
66 };
67 partition@10000 {
68 label = "u-boot";
69 reg = <0x10000 0x50000>;
70 };
71 partition@60000 {
72 label = "environment";
73 reg = <0x60000 0x10000>;
74 };
75 partition@70000 {
76 label = "dtb";
77 reg = <0x70000 0x10000>;
78 };
79 partition@80000 {
80 label = "linux";
81 reg = <0x80000 0x310000>;
82 };
83 partition@390000 {
84 label = "rootfs";
85 reg = <0x390000 0x0>;
86 };
87 };
88 };
89};
90
91&uart0 {
92 status = "okay";
93};
94
95&uart1 {
96 status = "okay";
97};
98
99&rtc {
100 status = "okay";
101};
102
103&i2c {
104 clock-frequency = <400000>;
105 status = "okay";
106};
1/*
2 * Copyright 2012 Stefan Roese <sr@denx.de>
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/dts-v1/;
13/include/ "spear600.dtsi"
14
15/ {
16 model = "ST SPEAr600 Evaluation Board";
17 compatible = "st,spear600-evb", "st,spear600";
18 #address-cells = <1>;
19 #size-cells = <1>;
20
21 memory {
22 device_type = "memory";
23 reg = <0 0x10000000>;
24 };
25
26 ahb {
27 clcd@fc200000 {
28 status = "okay";
29 };
30
31 dma@fc400000 {
32 status = "okay";
33 };
34
35 ehci@e1800000 {
36 status = "okay";
37 };
38
39 ehci@e2000000 {
40 status = "okay";
41 };
42
43 gmac: ethernet@e0800000 {
44 phy-mode = "gmii";
45 status = "okay";
46 };
47
48 ohci@e1900000 {
49 status = "okay";
50 };
51
52 ohci@e2100000 {
53 status = "okay";
54 };
55
56 smi: flash@fc000000 {
57 status = "okay";
58 clock-rate=<50000000>;
59
60 flash@f8000000 {
61 #address-cells = <1>;
62 #size-cells = <1>;
63 reg = <0xf8000000 0x800000>;
64 st,smi-fast-mode;
65
66 partition@0 {
67 label = "xloader";
68 reg = <0x0 0x10000>;
69 };
70 partition@10000 {
71 label = "u-boot";
72 reg = <0x10000 0x50000>;
73 };
74 partition@60000 {
75 label = "environment";
76 reg = <0x60000 0x10000>;
77 };
78 partition@70000 {
79 label = "dtb";
80 reg = <0x70000 0x10000>;
81 };
82 partition@80000 {
83 label = "linux";
84 reg = <0x80000 0x310000>;
85 };
86 partition@390000 {
87 label = "rootfs";
88 reg = <0x390000 0x0>;
89 };
90 };
91 };
92
93 apb {
94 serial@d0000000 {
95 status = "okay";
96 pinctrl-names = "default";
97 pinctrl-0 = <>;
98 };
99
100 serial@d0080000 {
101 status = "okay";
102 pinctrl-names = "default";
103 pinctrl-0 = <>;
104 };
105
106 rtc@fc900000 {
107 status = "okay";
108 };
109
110 i2c@d0200000 {
111 clock-frequency = <400000>;
112 status = "okay";
113 };
114 };
115 };
116};