Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
3
4#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
5
6/ {
7 #address-cells = <1>;
8 #size-cells = <1>;
9 model = "Marvell Orion5x SoC";
10 compatible = "marvell,orion5x";
11 interrupt-parent = <&intc>;
12
13 aliases {
14 gpio0 = &gpio0;
15 };
16
17 soc {
18 #address-cells = <2>;
19 #size-cells = <1>;
20 controller = <&mbusc>;
21
22 devbus_bootcs: devbus-bootcs {
23 compatible = "marvell,orion-devbus";
24 reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>;
25 ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>;
26 #address-cells = <1>;
27 #size-cells = <1>;
28 clocks = <&core_clk 0>;
29 status = "disabled";
30 };
31
32 devbus_cs0: devbus-cs0 {
33 compatible = "marvell,orion-devbus";
34 reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>;
35 ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>;
36 #address-cells = <1>;
37 #size-cells = <1>;
38 clocks = <&core_clk 0>;
39 status = "disabled";
40 };
41
42 devbus_cs1: devbus-cs1 {
43 compatible = "marvell,orion-devbus";
44 reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>;
45 ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>;
46 #address-cells = <1>;
47 #size-cells = <1>;
48 clocks = <&core_clk 0>;
49 status = "disabled";
50 };
51
52 devbus_cs2: devbus-cs2 {
53 compatible = "marvell,orion-devbus";
54 reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>;
55 ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>;
56 #address-cells = <1>;
57 #size-cells = <1>;
58 clocks = <&core_clk 0>;
59 status = "disabled";
60 };
61
62 internal-regs {
63 compatible = "simple-bus";
64 #address-cells = <1>;
65 #size-cells = <1>;
66 ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
67
68 gpio0: gpio@10100 {
69 compatible = "marvell,orion-gpio";
70 #gpio-cells = <2>;
71 gpio-controller;
72 reg = <0x10100 0x40>;
73 ngpios = <32>;
74 interrupt-controller;
75 #interrupt-cells = <2>;
76 interrupts = <6>, <7>, <8>, <9>;
77 };
78
79 spi: spi@10600 {
80 compatible = "marvell,orion-spi";
81 #address-cells = <1>;
82 #size-cells = <0>;
83 cell-index = <0>;
84 reg = <0x10600 0x28>;
85 status = "disabled";
86 };
87
88 i2c: i2c@11000 {
89 compatible = "marvell,mv64xxx-i2c";
90 reg = <0x11000 0x20>;
91 #address-cells = <1>;
92 #size-cells = <0>;
93 interrupts = <5>;
94 clocks = <&core_clk 0>;
95 status = "disabled";
96 };
97
98 uart0: serial@12000 {
99 compatible = "ns16550a";
100 reg = <0x12000 0x100>;
101 reg-shift = <2>;
102 interrupts = <3>;
103 clocks = <&core_clk 0>;
104 status = "disabled";
105 };
106
107 uart1: serial@12100 {
108 compatible = "ns16550a";
109 reg = <0x12100 0x100>;
110 reg-shift = <2>;
111 interrupts = <4>;
112 clocks = <&core_clk 0>;
113 status = "disabled";
114 };
115
116 bridge_intc: bridge-interrupt-ctrl@20110 {
117 compatible = "marvell,orion-bridge-intc";
118 interrupt-controller;
119 #interrupt-cells = <1>;
120 reg = <0x20110 0x8>;
121 interrupts = <0>;
122 marvell,#interrupts = <4>;
123 };
124
125 intc: interrupt-controller@20200 {
126 compatible = "marvell,orion-intc";
127 interrupt-controller;
128 #interrupt-cells = <1>;
129 reg = <0x20200 0x08>;
130 };
131
132 timer: timer@20300 {
133 compatible = "marvell,orion-timer";
134 reg = <0x20300 0x20>;
135 interrupt-parent = <&bridge_intc>;
136 interrupts = <1>, <2>;
137 clocks = <&core_clk 0>;
138 };
139
140 wdt: wdt@20300 {
141 compatible = "marvell,orion-wdt";
142 reg = <0x20300 0x28>, <0x20108 0x4>;
143 interrupt-parent = <&bridge_intc>;
144 interrupts = <3>;
145 clocks = <&core_clk 0>;
146 status = "okay";
147 };
148
149 ehci0: ehci@50000 {
150 compatible = "marvell,orion-ehci";
151 reg = <0x50000 0x1000>;
152 interrupts = <17>;
153 status = "disabled";
154 };
155
156 xor: dma-controller@60900 {
157 compatible = "marvell,orion-xor";
158 reg = <0x60900 0x100
159 0x60b00 0x100>;
160 status = "okay";
161
162 xor00 {
163 interrupts = <30>;
164 dmacap,memcpy;
165 dmacap,xor;
166 };
167 xor01 {
168 interrupts = <31>;
169 dmacap,memcpy;
170 dmacap,xor;
171 dmacap,memset;
172 };
173 };
174
175 eth: ethernet-controller@72000 {
176 compatible = "marvell,orion-eth";
177 #address-cells = <1>;
178 #size-cells = <0>;
179 reg = <0x72000 0x4000>;
180 marvell,tx-checksum-limit = <1600>;
181 status = "disabled";
182
183 ethport: ethernet-port@0 {
184 compatible = "marvell,orion-eth-port";
185 reg = <0>;
186 interrupts = <21>;
187 /* overwrite MAC address in bootloader */
188 local-mac-address = [00 00 00 00 00 00];
189 /* set phy-handle property in board file */
190 };
191 };
192
193 mdio: mdio-bus@72004 {
194 compatible = "marvell,orion-mdio";
195 #address-cells = <1>;
196 #size-cells = <0>;
197 reg = <0x72004 0x84>;
198 interrupts = <22>;
199 status = "disabled";
200
201 /* add phy nodes in board file */
202 };
203
204 sata: sata@80000 {
205 compatible = "marvell,orion-sata";
206 reg = <0x80000 0x5000>;
207 interrupts = <29>;
208 status = "disabled";
209 };
210
211 cesa: crypto@90000 {
212 compatible = "marvell,orion-crypto";
213 reg = <0x90000 0x10000>;
214 reg-names = "regs";
215 interrupts = <28>;
216 marvell,crypto-srams = <&crypto_sram>;
217 marvell,crypto-sram-size = <0x800>;
218 status = "okay";
219 };
220
221 ehci1: ehci@a0000 {
222 compatible = "marvell,orion-ehci";
223 reg = <0xa0000 0x1000>;
224 interrupts = <12>;
225 status = "disabled";
226 };
227 };
228
229 crypto_sram: sa-sram {
230 compatible = "mmio-sram";
231 reg = <MBUS_ID(0x09, 0x00) 0x0 0x800>;
232 #address-cells = <1>;
233 #size-cells = <1>;
234 };
235 };
236};
1/*
2 * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
3 *
4 * This file is licensed under the terms of the GNU General Public
5 * License version 2. This program is licensed "as is" without any
6 * warranty of any kind, whether express or implied.
7 */
8
9/include/ "skeleton.dtsi"
10
11/ {
12 model = "Marvell Orion5x SoC";
13 compatible = "marvell,orion5x";
14 interrupt-parent = <&intc>;
15
16 aliases {
17 gpio0 = &gpio0;
18 };
19
20 intc: interrupt-controller {
21 compatible = "marvell,orion-intc";
22 interrupt-controller;
23 #interrupt-cells = <1>;
24 reg = <0xf1020200 0x08>;
25 };
26
27 ocp@f1000000 {
28 compatible = "simple-bus";
29 ranges = <0x00000000 0xf1000000 0x4000000
30 0xf2200000 0xf2200000 0x0000800>;
31 #address-cells = <1>;
32 #size-cells = <1>;
33
34 gpio0: gpio@10100 {
35 compatible = "marvell,orion-gpio";
36 #gpio-cells = <2>;
37 gpio-controller;
38 reg = <0x10100 0x40>;
39 ngpios = <32>;
40 interrupt-controller;
41 #interrupt-cells = <2>;
42 interrupts = <6>, <7>, <8>, <9>;
43 };
44
45 spi@10600 {
46 compatible = "marvell,orion-spi";
47 #address-cells = <1>;
48 #size-cells = <0>;
49 cell-index = <0>;
50 reg = <0x10600 0x28>;
51 status = "disabled";
52 };
53
54 i2c@11000 {
55 compatible = "marvell,mv64xxx-i2c";
56 reg = <0x11000 0x20>;
57 #address-cells = <1>;
58 #size-cells = <0>;
59 interrupts = <5>;
60 clock-frequency = <100000>;
61 status = "disabled";
62 };
63
64 serial@12000 {
65 compatible = "ns16550a";
66 reg = <0x12000 0x100>;
67 reg-shift = <2>;
68 interrupts = <3>;
69 /* set clock-frequency in board dts */
70 status = "disabled";
71 };
72
73 serial@12100 {
74 compatible = "ns16550a";
75 reg = <0x12100 0x100>;
76 reg-shift = <2>;
77 interrupts = <4>;
78 /* set clock-frequency in board dts */
79 status = "disabled";
80 };
81
82 wdt@20300 {
83 compatible = "marvell,orion-wdt";
84 reg = <0x20300 0x28>;
85 status = "okay";
86 };
87
88 ehci@50000 {
89 compatible = "marvell,orion-ehci";
90 reg = <0x50000 0x1000>;
91 interrupts = <17>;
92 status = "disabled";
93 };
94
95 xor@60900 {
96 compatible = "marvell,orion-xor";
97 reg = <0x60900 0x100
98 0x60b00 0x100>;
99 status = "okay";
100
101 xor00 {
102 interrupts = <30>;
103 dmacap,memcpy;
104 dmacap,xor;
105 };
106 xor01 {
107 interrupts = <31>;
108 dmacap,memcpy;
109 dmacap,xor;
110 dmacap,memset;
111 };
112 };
113
114 eth: ethernet-controller@72000 {
115 compatible = "marvell,orion-eth";
116 #address-cells = <1>;
117 #size-cells = <0>;
118 reg = <0x72000 0x4000>;
119 marvell,tx-checksum-limit = <1600>;
120 status = "disabled";
121
122 ethernet-port@0 {
123 compatible = "marvell,orion-eth-port";
124 reg = <0>;
125 /* overwrite MAC address in bootloader */
126 local-mac-address = [00 00 00 00 00 00];
127 /* set phy-handle property in board file */
128 };
129 };
130
131 mdio: mdio-bus@72004 {
132 compatible = "marvell,orion-mdio";
133 #address-cells = <1>;
134 #size-cells = <0>;
135 reg = <0x72004 0x84>;
136 interrupts = <22>;
137 status = "disabled";
138
139 /* add phy nodes in board file */
140 };
141
142 sata@80000 {
143 compatible = "marvell,orion-sata";
144 reg = <0x80000 0x5000>;
145 interrupts = <29>;
146 status = "disabled";
147 };
148
149 crypto@90000 {
150 compatible = "marvell,orion-crypto";
151 reg = <0x90000 0x10000>,
152 <0xf2200000 0x800>;
153 reg-names = "regs", "sram";
154 interrupts = <28>;
155 status = "okay";
156 };
157
158 ehci@a0000 {
159 compatible = "marvell,orion-ehci";
160 reg = <0xa0000 0x1000>;
161 interrupts = <12>;
162 status = "disabled";
163 };
164 };
165};