Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
4 *
5 */
6
7/dts-v1/;
8
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/input/input.h>
11#include "kirkwood.dtsi"
12#include "kirkwood-6192.dtsi"
13
14/ {
15 model = "LaCie LaPlug";
16 compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
17
18 memory {
19 device_type = "memory";
20 reg = <0x00000000 0x8000000>; /* 128 MB */
21 };
22
23 chosen {
24 bootargs = "console=ttyS0,115200n8 earlyprintk";
25 stdout-path = &uart0;
26 };
27
28 ocp@f1000000 {
29 serial@12000 {
30 status = "okay";
31 };
32
33 i2c@11000 {
34 status = "okay";
35
36 eeprom@50 {
37 compatible = "atmel,24c04";
38 pagesize = <16>;
39 reg = <0x50>;
40 };
41 };
42
43 pinctrl: pin-controller@10000 {
44 pmx_usb_power_enable: pmx-usb-power-enable {
45 marvell,pins = "mpp14";
46 marvell,function = "gpio";
47 };
48 };
49 };
50
51 gpio_keys {
52 compatible = "gpio-keys";
53
54 power {
55 label = "Power push button";
56 linux,code = <KEY_POWER>;
57 gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
58 };
59 };
60
61 gpio-leds {
62 compatible = "gpio-leds";
63
64 red-fail {
65 label = "laplug_v2:red:power";
66 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
67 };
68 blue-power {
69 label = "laplug_v2:blue:power";
70 gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
71 linux,default-trigger = "default-on";
72 };
73 };
74
75 gpio_poweroff {
76 compatible = "gpio-poweroff";
77 gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
78 };
79
80 regulators {
81 compatible = "simple-bus";
82 #address-cells = <1>;
83 #size-cells = <0>;
84 pinctrl-0 = <&pmx_usb_power_enable>;
85 pinctrl-names = "default";
86
87 usb_power_back1: regulator@1 {
88 compatible = "regulator-fixed";
89 reg = <1>;
90 regulator-name = "USB Power Back 1";
91 regulator-min-microvolt = <5000000>;
92 regulator-max-microvolt = <5000000>;
93 enable-active-high;
94 regulator-always-on;
95 regulator-boot-on;
96 gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
97 };
98
99 usb_power_back2: regulator@2 {
100 compatible = "regulator-fixed";
101 reg = <2>;
102 regulator-name = "USB Power Back 2";
103 regulator-min-microvolt = <5000000>;
104 regulator-max-microvolt = <5000000>;
105 enable-active-high;
106 regulator-always-on;
107 regulator-boot-on;
108 gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
109 };
110
111 usb_power_front: regulator@3 {
112 compatible = "regulator-fixed";
113 reg = <3>;
114 regulator-name = "USB Power Front";
115 regulator-min-microvolt = <5000000>;
116 regulator-max-microvolt = <5000000>;
117 enable-active-high;
118 regulator-always-on;
119 regulator-boot-on;
120 gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
121 };
122 };
123};
124
125&nand {
126 /* Total size : 512MB */
127 status = "okay";
128
129 partition@0 {
130 label = "u-boot";
131 reg = <0x0 0x100000>; /* 1MB */
132 read-only;
133 };
134
135 partition@100000 {
136 label = "uImage";
137 reg = <0x100000 0x1000000>; /* 16MB */
138 };
139
140 partition@1100000 {
141 label = "rootfs";
142 reg = <0x1100000 0x1EF00000>; /* 495MB */
143 };
144};
145
146&mdio {
147 status = "okay";
148
149 ethphy0: ethernet-phy@0 {
150 device_type = "ethernet-phy";
151 reg = <0>;
152 };
153};
154
155ð0 {
156 status = "okay";
157 ethernet0-port@0 {
158 phy-handle = <ðphy0>;
159 };
160};
161
162&pciec {
163 status = "okay";
164};
165
166&pcie0 {
167 status = "okay";
168};
1/*
2 * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
3 *
4 * This file is licensed under the terms of the GNU General Public
5 * License version 2. This program is licensed "as is" without any
6 * warranty of any kind, whether express or implied.
7 */
8
9/dts-v1/;
10
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/input/input.h>
13#include "kirkwood.dtsi"
14#include "kirkwood-6192.dtsi"
15
16/ {
17 model = "LaCie LaPlug";
18 compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
19
20 memory {
21 device_type = "memory";
22 reg = <0x00000000 0x8000000>; /* 128 MB */
23 };
24
25 chosen {
26 bootargs = "console=ttyS0,115200n8 earlyprintk";
27 };
28
29 mbus {
30 pcie-controller {
31 status = "okay";
32 pcie@1,0 {
33 status = "okay";
34 };
35 };
36 };
37
38 ocp@f1000000 {
39 serial@12000 {
40 pinctrl-0 = <&pmx_uart0>;
41 pinctrl-names = "default";
42 status = "okay";
43 };
44
45 i2c@11000 {
46 pinctrl-0 = <&pmx_twsi0>;
47 pinctrl-names = "default";
48 status = "okay";
49
50 eeprom@50 {
51 compatible = "atmel,24c04";
52 pagesize = <16>;
53 reg = <0x50>;
54 };
55 };
56
57 pinctrl: pinctrl@10000 {
58 pmx_usb_power_enable: pmx-usb-power-enable {
59 marvell,pins = "mpp14";
60 marvell,function = "gpio";
61 };
62 };
63 };
64
65 gpio_keys {
66 compatible = "gpio-keys";
67
68 button@1{
69 label = "Power push button";
70 linux,code = <KEY_POWER>;
71 gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
72 };
73 };
74
75 gpio-leds {
76 compatible = "gpio-leds";
77
78 red-fail {
79 label = "laplug_v2:red:power";
80 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
81 };
82 blue-power {
83 label = "laplug_v2:blue:power";
84 gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
85 linux,default-trigger = "default-on";
86 };
87 };
88
89 gpio_poweroff {
90 compatible = "gpio-poweroff";
91 gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
92 };
93
94 regulators {
95 compatible = "simple-bus";
96 #address-cells = <1>;
97 #size-cells = <0>;
98 pinctrl-0 = <&pmx_usb_power_enable>;
99 pinctrl-names = "default";
100
101 usb_power_back1: regulator@1 {
102 compatible = "regulator-fixed";
103 reg = <1>;
104 regulator-name = "USB Power Back 1";
105 regulator-min-microvolt = <5000000>;
106 regulator-max-microvolt = <5000000>;
107 enable-active-high;
108 regulator-always-on;
109 regulator-boot-on;
110 gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
111 };
112
113 usb_power_back2: regulator@2 {
114 compatible = "regulator-fixed";
115 reg = <2>;
116 regulator-name = "USB Power Back 2";
117 regulator-min-microvolt = <5000000>;
118 regulator-max-microvolt = <5000000>;
119 enable-active-high;
120 regulator-always-on;
121 regulator-boot-on;
122 gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
123 };
124
125 usb_power_front: regulator@3 {
126 compatible = "regulator-fixed";
127 reg = <3>;
128 regulator-name = "USB Power Front";
129 regulator-min-microvolt = <5000000>;
130 regulator-max-microvolt = <5000000>;
131 enable-active-high;
132 regulator-always-on;
133 regulator-boot-on;
134 gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
135 };
136 };
137};
138
139&nand {
140 /* Total size : 512MB */
141 status = "okay";
142 pinctrl-0 = <&pmx_nand>;
143
144 partition@0 {
145 label = "u-boot";
146 reg = <0x0 0x100000>; /* 1MB */
147 read-only;
148 };
149
150 partition@100000 {
151 label = "uImage";
152 reg = <0x100000 0x1000000>; /* 16MB */
153 };
154
155 partition@1100000 {
156 label = "rootfs";
157 reg = <0x1100000 0x1EF00000>; /* 495MB */
158 };
159};
160
161&mdio {
162 status = "okay";
163
164 ethphy0: ethernet-phy@0 {
165 device_type = "ethernet-phy";
166 reg = <0>;
167 };
168};
169
170ð0 {
171 status = "okay";
172 ethernet0-port@0 {
173 phy-handle = <ðphy0>;
174 };
175};