Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Broadcom BCM63xx SPI controller support
4 *
5 * Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org>
6 * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
7 */
8
9#include <linux/kernel.h>
10#include <linux/clk.h>
11#include <linux/io.h>
12#include <linux/module.h>
13#include <linux/platform_device.h>
14#include <linux/delay.h>
15#include <linux/interrupt.h>
16#include <linux/spi/spi.h>
17#include <linux/completion.h>
18#include <linux/err.h>
19#include <linux/pm_runtime.h>
20#include <linux/of.h>
21#include <linux/reset.h>
22
23/* BCM 6338/6348 SPI core */
24#define SPI_6348_RSET_SIZE 64
25#define SPI_6348_CMD 0x00 /* 16-bits register */
26#define SPI_6348_INT_STATUS 0x02
27#define SPI_6348_INT_MASK_ST 0x03
28#define SPI_6348_INT_MASK 0x04
29#define SPI_6348_ST 0x05
30#define SPI_6348_CLK_CFG 0x06
31#define SPI_6348_FILL_BYTE 0x07
32#define SPI_6348_MSG_TAIL 0x09
33#define SPI_6348_RX_TAIL 0x0b
34#define SPI_6348_MSG_CTL 0x40 /* 8-bits register */
35#define SPI_6348_MSG_CTL_WIDTH 8
36#define SPI_6348_MSG_DATA 0x41
37#define SPI_6348_MSG_DATA_SIZE 0x3f
38#define SPI_6348_RX_DATA 0x80
39#define SPI_6348_RX_DATA_SIZE 0x3f
40
41/* BCM 3368/6358/6262/6368 SPI core */
42#define SPI_6358_RSET_SIZE 1804
43#define SPI_6358_MSG_CTL 0x00 /* 16-bits register */
44#define SPI_6358_MSG_CTL_WIDTH 16
45#define SPI_6358_MSG_DATA 0x02
46#define SPI_6358_MSG_DATA_SIZE 0x21e
47#define SPI_6358_RX_DATA 0x400
48#define SPI_6358_RX_DATA_SIZE 0x220
49#define SPI_6358_CMD 0x700 /* 16-bits register */
50#define SPI_6358_INT_STATUS 0x702
51#define SPI_6358_INT_MASK_ST 0x703
52#define SPI_6358_INT_MASK 0x704
53#define SPI_6358_ST 0x705
54#define SPI_6358_CLK_CFG 0x706
55#define SPI_6358_FILL_BYTE 0x707
56#define SPI_6358_MSG_TAIL 0x709
57#define SPI_6358_RX_TAIL 0x70B
58
59/* Shared SPI definitions */
60
61/* Message configuration */
62#define SPI_FD_RW 0x00
63#define SPI_HD_W 0x01
64#define SPI_HD_R 0x02
65#define SPI_BYTE_CNT_SHIFT 0
66#define SPI_6348_MSG_TYPE_SHIFT 6
67#define SPI_6358_MSG_TYPE_SHIFT 14
68
69/* Command */
70#define SPI_CMD_NOOP 0x00
71#define SPI_CMD_SOFT_RESET 0x01
72#define SPI_CMD_HARD_RESET 0x02
73#define SPI_CMD_START_IMMEDIATE 0x03
74#define SPI_CMD_COMMAND_SHIFT 0
75#define SPI_CMD_COMMAND_MASK 0x000f
76#define SPI_CMD_DEVICE_ID_SHIFT 4
77#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
78#define SPI_CMD_ONE_BYTE_SHIFT 11
79#define SPI_CMD_ONE_WIRE_SHIFT 12
80#define SPI_DEV_ID_0 0
81#define SPI_DEV_ID_1 1
82#define SPI_DEV_ID_2 2
83#define SPI_DEV_ID_3 3
84
85/* Interrupt mask */
86#define SPI_INTR_CMD_DONE 0x01
87#define SPI_INTR_RX_OVERFLOW 0x02
88#define SPI_INTR_TX_UNDERFLOW 0x04
89#define SPI_INTR_TX_OVERFLOW 0x08
90#define SPI_INTR_RX_UNDERFLOW 0x10
91#define SPI_INTR_CLEAR_ALL 0x1f
92
93/* Status */
94#define SPI_RX_EMPTY 0x02
95#define SPI_CMD_BUSY 0x04
96#define SPI_SERIAL_BUSY 0x08
97
98/* Clock configuration */
99#define SPI_CLK_20MHZ 0x00
100#define SPI_CLK_0_391MHZ 0x01
101#define SPI_CLK_0_781MHZ 0x02 /* default */
102#define SPI_CLK_1_563MHZ 0x03
103#define SPI_CLK_3_125MHZ 0x04
104#define SPI_CLK_6_250MHZ 0x05
105#define SPI_CLK_12_50MHZ 0x06
106#define SPI_CLK_MASK 0x07
107#define SPI_SSOFFTIME_MASK 0x38
108#define SPI_SSOFFTIME_SHIFT 3
109#define SPI_BYTE_SWAP 0x80
110
111enum bcm63xx_regs_spi {
112 SPI_CMD,
113 SPI_INT_STATUS,
114 SPI_INT_MASK_ST,
115 SPI_INT_MASK,
116 SPI_ST,
117 SPI_CLK_CFG,
118 SPI_FILL_BYTE,
119 SPI_MSG_TAIL,
120 SPI_RX_TAIL,
121 SPI_MSG_CTL,
122 SPI_MSG_DATA,
123 SPI_RX_DATA,
124 SPI_MSG_TYPE_SHIFT,
125 SPI_MSG_CTL_WIDTH,
126 SPI_MSG_DATA_SIZE,
127};
128
129#define BCM63XX_SPI_MAX_PREPEND 15
130
131#define BCM63XX_SPI_MAX_CS 8
132#define BCM63XX_SPI_BUS_NUM 0
133
134struct bcm63xx_spi {
135 struct completion done;
136
137 void __iomem *regs;
138 int irq;
139
140 /* Platform data */
141 const unsigned long *reg_offsets;
142 unsigned int fifo_size;
143 unsigned int msg_type_shift;
144 unsigned int msg_ctl_width;
145
146 /* data iomem */
147 u8 __iomem *tx_io;
148 const u8 __iomem *rx_io;
149
150 struct clk *clk;
151 struct platform_device *pdev;
152};
153
154static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs,
155 unsigned int offset)
156{
157 return readb(bs->regs + bs->reg_offsets[offset]);
158}
159
160static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs,
161 unsigned int offset)
162{
163#ifdef CONFIG_CPU_BIG_ENDIAN
164 return ioread16be(bs->regs + bs->reg_offsets[offset]);
165#else
166 return readw(bs->regs + bs->reg_offsets[offset]);
167#endif
168}
169
170static inline void bcm_spi_writeb(struct bcm63xx_spi *bs,
171 u8 value, unsigned int offset)
172{
173 writeb(value, bs->regs + bs->reg_offsets[offset]);
174}
175
176static inline void bcm_spi_writew(struct bcm63xx_spi *bs,
177 u16 value, unsigned int offset)
178{
179#ifdef CONFIG_CPU_BIG_ENDIAN
180 iowrite16be(value, bs->regs + bs->reg_offsets[offset]);
181#else
182 writew(value, bs->regs + bs->reg_offsets[offset]);
183#endif
184}
185
186static const unsigned int bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = {
187 { 20000000, SPI_CLK_20MHZ },
188 { 12500000, SPI_CLK_12_50MHZ },
189 { 6250000, SPI_CLK_6_250MHZ },
190 { 3125000, SPI_CLK_3_125MHZ },
191 { 1563000, SPI_CLK_1_563MHZ },
192 { 781000, SPI_CLK_0_781MHZ },
193 { 391000, SPI_CLK_0_391MHZ }
194};
195
196static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
197 struct spi_transfer *t)
198{
199 struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
200 u8 clk_cfg, reg;
201 int i;
202
203 /* Default to lowest clock configuration */
204 clk_cfg = SPI_CLK_0_391MHZ;
205
206 /* Find the closest clock configuration */
207 for (i = 0; i < SPI_CLK_MASK; i++) {
208 if (t->speed_hz >= bcm63xx_spi_freq_table[i][0]) {
209 clk_cfg = bcm63xx_spi_freq_table[i][1];
210 break;
211 }
212 }
213
214 /* clear existing clock configuration bits of the register */
215 reg = bcm_spi_readb(bs, SPI_CLK_CFG);
216 reg &= ~SPI_CLK_MASK;
217 reg |= clk_cfg;
218
219 bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
220 dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
221 clk_cfg, t->speed_hz);
222}
223
224/* the spi->mode bits understood by this driver: */
225#define MODEBITS (SPI_CPOL | SPI_CPHA)
226
227static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
228 unsigned int num_transfers)
229{
230 struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
231 u16 msg_ctl;
232 u16 cmd;
233 unsigned int i, timeout = 0, prepend_len = 0, len = 0;
234 struct spi_transfer *t = first;
235 bool do_rx = false;
236 bool do_tx = false;
237
238 /* Disable the CMD_DONE interrupt */
239 bcm_spi_writeb(bs, 0, SPI_INT_MASK);
240
241 dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
242 t->tx_buf, t->rx_buf, t->len);
243
244 if (num_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND)
245 prepend_len = t->len;
246
247 /* prepare the buffer */
248 for (i = 0; i < num_transfers; i++) {
249 if (t->tx_buf) {
250 do_tx = true;
251 memcpy_toio(bs->tx_io + len, t->tx_buf, t->len);
252
253 /* don't prepend more than one tx */
254 if (t != first)
255 prepend_len = 0;
256 }
257
258 if (t->rx_buf) {
259 do_rx = true;
260 /* prepend is half-duplex write only */
261 if (t == first)
262 prepend_len = 0;
263 }
264
265 len += t->len;
266
267 t = list_entry(t->transfer_list.next, struct spi_transfer,
268 transfer_list);
269 }
270
271 reinit_completion(&bs->done);
272
273 /* Fill in the Message control register */
274 msg_ctl = (len << SPI_BYTE_CNT_SHIFT);
275
276 if (do_rx && do_tx && prepend_len == 0)
277 msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
278 else if (do_rx)
279 msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
280 else if (do_tx)
281 msg_ctl |= (SPI_HD_W << bs->msg_type_shift);
282
283 switch (bs->msg_ctl_width) {
284 case 8:
285 bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL);
286 break;
287 case 16:
288 bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
289 break;
290 }
291
292 /* Issue the transfer */
293 cmd = SPI_CMD_START_IMMEDIATE;
294 cmd |= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
295 cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
296 bcm_spi_writew(bs, cmd, SPI_CMD);
297
298 /* Enable the CMD_DONE interrupt */
299 bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
300
301 timeout = wait_for_completion_timeout(&bs->done, HZ);
302 if (!timeout)
303 return -ETIMEDOUT;
304
305 if (!do_rx)
306 return 0;
307
308 len = 0;
309 t = first;
310 /* Read out all the data */
311 for (i = 0; i < num_transfers; i++) {
312 if (t->rx_buf)
313 memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len);
314
315 if (t != first || prepend_len == 0)
316 len += t->len;
317
318 t = list_entry(t->transfer_list.next, struct spi_transfer,
319 transfer_list);
320 }
321
322 return 0;
323}
324
325static int bcm63xx_spi_transfer_one(struct spi_master *master,
326 struct spi_message *m)
327{
328 struct bcm63xx_spi *bs = spi_master_get_devdata(master);
329 struct spi_transfer *t, *first = NULL;
330 struct spi_device *spi = m->spi;
331 int status = 0;
332 unsigned int n_transfers = 0, total_len = 0;
333 bool can_use_prepend = false;
334
335 /*
336 * This SPI controller does not support keeping CS active after a
337 * transfer.
338 * Work around this by merging as many transfers we can into one big
339 * full-duplex transfers.
340 */
341 list_for_each_entry(t, &m->transfers, transfer_list) {
342 if (!first)
343 first = t;
344
345 n_transfers++;
346 total_len += t->len;
347
348 if (n_transfers == 2 && !first->rx_buf && !t->tx_buf &&
349 first->len <= BCM63XX_SPI_MAX_PREPEND)
350 can_use_prepend = true;
351 else if (can_use_prepend && t->tx_buf)
352 can_use_prepend = false;
353
354 /* we can only transfer one fifo worth of data */
355 if ((can_use_prepend &&
356 total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) ||
357 (!can_use_prepend && total_len > bs->fifo_size)) {
358 dev_err(&spi->dev, "unable to do transfers larger than FIFO size (%i > %i)\n",
359 total_len, bs->fifo_size);
360 status = -EINVAL;
361 goto exit;
362 }
363
364 /* all combined transfers have to have the same speed */
365 if (t->speed_hz != first->speed_hz) {
366 dev_err(&spi->dev, "unable to change speed between transfers\n");
367 status = -EINVAL;
368 goto exit;
369 }
370
371 /* CS will be deasserted directly after transfer */
372 if (t->delay.value) {
373 dev_err(&spi->dev, "unable to keep CS asserted after transfer\n");
374 status = -EINVAL;
375 goto exit;
376 }
377
378 if (t->cs_change ||
379 list_is_last(&t->transfer_list, &m->transfers)) {
380 /* configure adapter for a new transfer */
381 bcm63xx_spi_setup_transfer(spi, first);
382
383 /* send the data */
384 status = bcm63xx_txrx_bufs(spi, first, n_transfers);
385 if (status)
386 goto exit;
387
388 m->actual_length += total_len;
389
390 first = NULL;
391 n_transfers = 0;
392 total_len = 0;
393 can_use_prepend = false;
394 }
395 }
396exit:
397 m->status = status;
398 spi_finalize_current_message(master);
399
400 return 0;
401}
402
403/* This driver supports single master mode only. Hence
404 * CMD_DONE is the only interrupt we care about
405 */
406static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
407{
408 struct spi_master *master = (struct spi_master *)dev_id;
409 struct bcm63xx_spi *bs = spi_master_get_devdata(master);
410 u8 intr;
411
412 /* Read interupts and clear them immediately */
413 intr = bcm_spi_readb(bs, SPI_INT_STATUS);
414 bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
415 bcm_spi_writeb(bs, 0, SPI_INT_MASK);
416
417 /* A transfer completed */
418 if (intr & SPI_INTR_CMD_DONE)
419 complete(&bs->done);
420
421 return IRQ_HANDLED;
422}
423
424static size_t bcm63xx_spi_max_length(struct spi_device *spi)
425{
426 struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
427
428 return bs->fifo_size;
429}
430
431static const unsigned long bcm6348_spi_reg_offsets[] = {
432 [SPI_CMD] = SPI_6348_CMD,
433 [SPI_INT_STATUS] = SPI_6348_INT_STATUS,
434 [SPI_INT_MASK_ST] = SPI_6348_INT_MASK_ST,
435 [SPI_INT_MASK] = SPI_6348_INT_MASK,
436 [SPI_ST] = SPI_6348_ST,
437 [SPI_CLK_CFG] = SPI_6348_CLK_CFG,
438 [SPI_FILL_BYTE] = SPI_6348_FILL_BYTE,
439 [SPI_MSG_TAIL] = SPI_6348_MSG_TAIL,
440 [SPI_RX_TAIL] = SPI_6348_RX_TAIL,
441 [SPI_MSG_CTL] = SPI_6348_MSG_CTL,
442 [SPI_MSG_DATA] = SPI_6348_MSG_DATA,
443 [SPI_RX_DATA] = SPI_6348_RX_DATA,
444 [SPI_MSG_TYPE_SHIFT] = SPI_6348_MSG_TYPE_SHIFT,
445 [SPI_MSG_CTL_WIDTH] = SPI_6348_MSG_CTL_WIDTH,
446 [SPI_MSG_DATA_SIZE] = SPI_6348_MSG_DATA_SIZE,
447};
448
449static const unsigned long bcm6358_spi_reg_offsets[] = {
450 [SPI_CMD] = SPI_6358_CMD,
451 [SPI_INT_STATUS] = SPI_6358_INT_STATUS,
452 [SPI_INT_MASK_ST] = SPI_6358_INT_MASK_ST,
453 [SPI_INT_MASK] = SPI_6358_INT_MASK,
454 [SPI_ST] = SPI_6358_ST,
455 [SPI_CLK_CFG] = SPI_6358_CLK_CFG,
456 [SPI_FILL_BYTE] = SPI_6358_FILL_BYTE,
457 [SPI_MSG_TAIL] = SPI_6358_MSG_TAIL,
458 [SPI_RX_TAIL] = SPI_6358_RX_TAIL,
459 [SPI_MSG_CTL] = SPI_6358_MSG_CTL,
460 [SPI_MSG_DATA] = SPI_6358_MSG_DATA,
461 [SPI_RX_DATA] = SPI_6358_RX_DATA,
462 [SPI_MSG_TYPE_SHIFT] = SPI_6358_MSG_TYPE_SHIFT,
463 [SPI_MSG_CTL_WIDTH] = SPI_6358_MSG_CTL_WIDTH,
464 [SPI_MSG_DATA_SIZE] = SPI_6358_MSG_DATA_SIZE,
465};
466
467static const struct platform_device_id bcm63xx_spi_dev_match[] = {
468 {
469 .name = "bcm6348-spi",
470 .driver_data = (unsigned long)bcm6348_spi_reg_offsets,
471 },
472 {
473 .name = "bcm6358-spi",
474 .driver_data = (unsigned long)bcm6358_spi_reg_offsets,
475 },
476 {
477 },
478};
479
480static const struct of_device_id bcm63xx_spi_of_match[] = {
481 { .compatible = "brcm,bcm6348-spi", .data = &bcm6348_spi_reg_offsets },
482 { .compatible = "brcm,bcm6358-spi", .data = &bcm6358_spi_reg_offsets },
483 { },
484};
485
486static int bcm63xx_spi_probe(struct platform_device *pdev)
487{
488 struct resource *r;
489 const unsigned long *bcm63xx_spireg;
490 struct device *dev = &pdev->dev;
491 int irq, bus_num;
492 struct spi_master *master;
493 struct clk *clk;
494 struct bcm63xx_spi *bs;
495 int ret;
496 u32 num_cs = BCM63XX_SPI_MAX_CS;
497 struct reset_control *reset;
498
499 if (dev->of_node) {
500 const struct of_device_id *match;
501
502 match = of_match_node(bcm63xx_spi_of_match, dev->of_node);
503 if (!match)
504 return -EINVAL;
505 bcm63xx_spireg = match->data;
506
507 of_property_read_u32(dev->of_node, "num-cs", &num_cs);
508 if (num_cs > BCM63XX_SPI_MAX_CS) {
509 dev_warn(dev, "unsupported number of cs (%i), reducing to 8\n",
510 num_cs);
511 num_cs = BCM63XX_SPI_MAX_CS;
512 }
513
514 bus_num = -1;
515 } else if (pdev->id_entry->driver_data) {
516 const struct platform_device_id *match = pdev->id_entry;
517
518 bcm63xx_spireg = (const unsigned long *)match->driver_data;
519 bus_num = BCM63XX_SPI_BUS_NUM;
520 } else {
521 return -EINVAL;
522 }
523
524 irq = platform_get_irq(pdev, 0);
525 if (irq < 0)
526 return irq;
527
528 clk = devm_clk_get(dev, "spi");
529 if (IS_ERR(clk)) {
530 dev_err(dev, "no clock for device\n");
531 return PTR_ERR(clk);
532 }
533
534 reset = devm_reset_control_get_optional_exclusive(dev, NULL);
535 if (IS_ERR(reset))
536 return PTR_ERR(reset);
537
538 master = spi_alloc_master(dev, sizeof(*bs));
539 if (!master) {
540 dev_err(dev, "out of memory\n");
541 return -ENOMEM;
542 }
543
544 bs = spi_master_get_devdata(master);
545 init_completion(&bs->done);
546
547 platform_set_drvdata(pdev, master);
548 bs->pdev = pdev;
549
550 bs->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &r);
551 if (IS_ERR(bs->regs)) {
552 ret = PTR_ERR(bs->regs);
553 goto out_err;
554 }
555
556 bs->irq = irq;
557 bs->clk = clk;
558 bs->reg_offsets = bcm63xx_spireg;
559 bs->fifo_size = bs->reg_offsets[SPI_MSG_DATA_SIZE];
560
561 ret = devm_request_irq(&pdev->dev, irq, bcm63xx_spi_interrupt, 0,
562 pdev->name, master);
563 if (ret) {
564 dev_err(dev, "unable to request irq\n");
565 goto out_err;
566 }
567
568 master->dev.of_node = dev->of_node;
569 master->bus_num = bus_num;
570 master->num_chipselect = num_cs;
571 master->transfer_one_message = bcm63xx_spi_transfer_one;
572 master->mode_bits = MODEBITS;
573 master->bits_per_word_mask = SPI_BPW_MASK(8);
574 master->max_transfer_size = bcm63xx_spi_max_length;
575 master->max_message_size = bcm63xx_spi_max_length;
576 master->auto_runtime_pm = true;
577 bs->msg_type_shift = bs->reg_offsets[SPI_MSG_TYPE_SHIFT];
578 bs->msg_ctl_width = bs->reg_offsets[SPI_MSG_CTL_WIDTH];
579 bs->tx_io = (u8 *)(bs->regs + bs->reg_offsets[SPI_MSG_DATA]);
580 bs->rx_io = (const u8 *)(bs->regs + bs->reg_offsets[SPI_RX_DATA]);
581
582 /* Initialize hardware */
583 ret = clk_prepare_enable(bs->clk);
584 if (ret)
585 goto out_err;
586
587 ret = reset_control_reset(reset);
588 if (ret) {
589 dev_err(dev, "unable to reset device: %d\n", ret);
590 goto out_clk_disable;
591 }
592
593 bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
594
595 pm_runtime_enable(&pdev->dev);
596
597 /* register and we are done */
598 ret = devm_spi_register_master(dev, master);
599 if (ret) {
600 dev_err(dev, "spi register failed\n");
601 goto out_pm_disable;
602 }
603
604 dev_info(dev, "at %pr (irq %d, FIFOs size %d)\n",
605 r, irq, bs->fifo_size);
606
607 return 0;
608
609out_pm_disable:
610 pm_runtime_disable(&pdev->dev);
611out_clk_disable:
612 clk_disable_unprepare(clk);
613out_err:
614 spi_master_put(master);
615 return ret;
616}
617
618static int bcm63xx_spi_remove(struct platform_device *pdev)
619{
620 struct spi_master *master = platform_get_drvdata(pdev);
621 struct bcm63xx_spi *bs = spi_master_get_devdata(master);
622
623 /* reset spi block */
624 bcm_spi_writeb(bs, 0, SPI_INT_MASK);
625
626 /* HW shutdown */
627 clk_disable_unprepare(bs->clk);
628
629 return 0;
630}
631
632#ifdef CONFIG_PM_SLEEP
633static int bcm63xx_spi_suspend(struct device *dev)
634{
635 struct spi_master *master = dev_get_drvdata(dev);
636 struct bcm63xx_spi *bs = spi_master_get_devdata(master);
637
638 spi_master_suspend(master);
639
640 clk_disable_unprepare(bs->clk);
641
642 return 0;
643}
644
645static int bcm63xx_spi_resume(struct device *dev)
646{
647 struct spi_master *master = dev_get_drvdata(dev);
648 struct bcm63xx_spi *bs = spi_master_get_devdata(master);
649 int ret;
650
651 ret = clk_prepare_enable(bs->clk);
652 if (ret)
653 return ret;
654
655 spi_master_resume(master);
656
657 return 0;
658}
659#endif
660
661static const struct dev_pm_ops bcm63xx_spi_pm_ops = {
662 SET_SYSTEM_SLEEP_PM_OPS(bcm63xx_spi_suspend, bcm63xx_spi_resume)
663};
664
665static struct platform_driver bcm63xx_spi_driver = {
666 .driver = {
667 .name = "bcm63xx-spi",
668 .pm = &bcm63xx_spi_pm_ops,
669 .of_match_table = bcm63xx_spi_of_match,
670 },
671 .id_table = bcm63xx_spi_dev_match,
672 .probe = bcm63xx_spi_probe,
673 .remove = bcm63xx_spi_remove,
674};
675
676module_platform_driver(bcm63xx_spi_driver);
677
678MODULE_ALIAS("platform:bcm63xx_spi");
679MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
680MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>");
681MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
682MODULE_LICENSE("GPL");