Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Touchscreen driver configuration
4#
5menuconfig INPUT_TOUCHSCREEN
6 bool "Touchscreens"
7 help
8 Say Y here, and a list of supported touchscreens will be displayed.
9 This option doesn't affect the kernel.
10
11 If unsure, say Y.
12
13if INPUT_TOUCHSCREEN
14
15config TOUCHSCREEN_88PM860X
16 tristate "Marvell 88PM860x touchscreen"
17 depends on MFD_88PM860X
18 help
19 Say Y here if you have a 88PM860x PMIC and want to enable
20 support for the built-in touchscreen.
21
22 If unsure, say N.
23
24 To compile this driver as a module, choose M here: the
25 module will be called 88pm860x-ts.
26
27config TOUCHSCREEN_ADS7846
28 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
29 depends on SPI_MASTER
30 depends on HWMON = n || HWMON
31 help
32 Say Y here if you have a touchscreen interface using the
33 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
34 and your board-specific setup code includes that in its
35 table of SPI devices.
36
37 If HWMON is selected, and the driver is told the reference voltage
38 on your board, you will also get hwmon interfaces for the voltage
39 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
40
41 If unsure, say N (but it's safe to say "Y").
42
43 To compile this driver as a module, choose M here: the
44 module will be called ads7846.
45
46config TOUCHSCREEN_AD7877
47 tristate "AD7877 based touchscreens"
48 depends on SPI_MASTER
49 help
50 Say Y here if you have a touchscreen interface using the
51 AD7877 controller, and your board-specific initialization
52 code includes that in its table of SPI devices.
53
54 If unsure, say N (but it's safe to say "Y").
55
56 To compile this driver as a module, choose M here: the
57 module will be called ad7877.
58
59config TOUCHSCREEN_AD7879
60 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
61 help
62 Say Y here if you want to support a touchscreen interface using
63 the AD7879-1/AD7889-1 controller.
64
65 You should select a bus connection too.
66
67 To compile this driver as a module, choose M here: the
68 module will be called ad7879.
69
70config TOUCHSCREEN_AD7879_I2C
71 tristate "support I2C bus connection"
72 depends on TOUCHSCREEN_AD7879 && I2C
73 select REGMAP_I2C
74 help
75 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
76
77 To compile this driver as a module, choose M here: the
78 module will be called ad7879-i2c.
79
80config TOUCHSCREEN_AD7879_SPI
81 tristate "support SPI bus connection"
82 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
83 select REGMAP_SPI
84 help
85 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
86
87 If unsure, say N (but it's safe to say "Y").
88
89 To compile this driver as a module, choose M here: the
90 module will be called ad7879-spi.
91
92config TOUCHSCREEN_ADC
93 tristate "Generic ADC based resistive touchscreen"
94 depends on IIO
95 select IIO_BUFFER
96 select IIO_BUFFER_CB
97 help
98 Say Y here if you want to use the generic ADC
99 resistive touchscreen driver.
100
101 If unsure, say N (but it's safe to say "Y").
102
103 To compile this driver as a module, choose M here: the
104 module will be called resistive-adc-touch.ko.
105
106config TOUCHSCREEN_AR1021_I2C
107 tristate "Microchip AR1020/1021 i2c touchscreen"
108 depends on I2C && OF
109 help
110 Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
111 controller chip in your system.
112
113 If unsure, say N.
114
115 To compile this driver as a module, choose M here: the
116 module will be called ar1021_i2c.
117
118config TOUCHSCREEN_ATMEL_MXT
119 tristate "Atmel mXT I2C Touchscreen"
120 depends on I2C
121 select FW_LOADER
122 help
123 Say Y here if you have Atmel mXT series I2C touchscreen,
124 such as AT42QT602240/ATMXT224, connected to your system.
125
126 If unsure, say N.
127
128 To compile this driver as a module, choose M here: the
129 module will be called atmel_mxt_ts.
130
131config TOUCHSCREEN_ATMEL_MXT_T37
132 bool "Support T37 Diagnostic Data"
133 depends on TOUCHSCREEN_ATMEL_MXT
134 depends on VIDEO_DEV=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_DEV=m)
135 select VIDEOBUF2_VMALLOC
136 help
137 Say Y here if you want support to output data from the T37
138 Diagnostic Data object using a V4L device.
139
140config TOUCHSCREEN_AUO_PIXCIR
141 tristate "AUO in-cell touchscreen using Pixcir ICs"
142 depends on I2C
143 depends on GPIOLIB || COMPILE_TEST
144 help
145 Say Y here if you have a AUO display with in-cell touchscreen
146 using Pixcir ICs.
147
148 If unsure, say N.
149
150 To compile this driver as a module, choose M here: the
151 module will be called auo-pixcir-ts.
152
153config TOUCHSCREEN_BU21013
154 tristate "BU21013 based touch panel controllers"
155 depends on I2C
156 help
157 Say Y here if you have a bu21013 touchscreen connected to
158 your system.
159
160 If unsure, say N.
161
162 To compile this driver as a module, choose M here: the
163 module will be called bu21013_ts.
164
165config TOUCHSCREEN_BU21029
166 tristate "Rohm BU21029 based touch panel controllers"
167 depends on I2C
168 help
169 Say Y here if you have a Rohm BU21029 touchscreen controller
170 connected to your system.
171
172 If unsure, say N.
173
174 To compile this driver as a module, choose M here: the
175 module will be called bu21029_ts.
176
177config TOUCHSCREEN_CHIPONE_ICN8318
178 tristate "chipone icn8318 touchscreen controller"
179 depends on GPIOLIB || COMPILE_TEST
180 depends on I2C
181 depends on OF
182 help
183 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
184
185 If unsure, say N.
186
187 To compile this driver as a module, choose M here: the
188 module will be called chipone_icn8318.
189
190config TOUCHSCREEN_CHIPONE_ICN8505
191 tristate "chipone icn8505 touchscreen controller"
192 depends on I2C && ACPI
193 help
194 Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
195
196 If unsure, say N.
197
198 To compile this driver as a module, choose M here: the
199 module will be called chipone_icn8505.
200
201config TOUCHSCREEN_CY8CTMA140
202 tristate "cy8ctma140 touchscreen"
203 depends on I2C
204 help
205 Say Y here if you have a Cypress CY8CTMA140 capacitive
206 touchscreen also just known as "TMA140"
207
208 If unsure, say N.
209
210 To compile this driver as a module, choose M here: the
211 module will be called cy8ctma140.
212
213config TOUCHSCREEN_CY8CTMG110
214 tristate "cy8ctmg110 touchscreen"
215 depends on I2C
216 depends on GPIOLIB || COMPILE_TEST
217 help
218 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
219 an AAVA device.
220
221 If unsure, say N.
222
223 To compile this driver as a module, choose M here: the
224 module will be called cy8ctmg110_ts.
225
226config TOUCHSCREEN_CYTTSP_CORE
227 tristate "Cypress TTSP touchscreen"
228 help
229 Say Y here if you have a touchscreen using controller from
230 the Cypress TrueTouch(tm) Standard Product family connected
231 to your system. You will also need to select appropriate
232 bus connection below.
233
234 If unsure, say N.
235
236 To compile this driver as a module, choose M here: the
237 module will be called cyttsp_core.
238
239config TOUCHSCREEN_CYTTSP_I2C
240 tristate "support I2C bus connection"
241 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
242 help
243 Say Y here if the touchscreen is connected via I2C bus.
244
245 To compile this driver as a module, choose M here: the
246 module will be called cyttsp_i2c.
247
248config TOUCHSCREEN_CYTTSP_SPI
249 tristate "support SPI bus connection"
250 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
251 help
252 Say Y here if the touchscreen is connected via SPI bus.
253
254 To compile this driver as a module, choose M here: the
255 module will be called cyttsp_spi.
256
257config TOUCHSCREEN_CYTTSP4_CORE
258 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
259 help
260 Core driver for Cypress TrueTouch(tm) Standard Product
261 Generation4 touchscreen controllers.
262
263 Say Y here if you have a Cypress Gen4 touchscreen.
264
265 If unsure, say N.
266
267 To compile this driver as a module, choose M here.
268
269config TOUCHSCREEN_CYTTSP4_I2C
270 tristate "support I2C bus connection"
271 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
272 help
273 Say Y here if the touchscreen is connected via I2C bus.
274
275 To compile this driver as a module, choose M here: the
276 module will be called cyttsp4_i2c.
277
278config TOUCHSCREEN_CYTTSP4_SPI
279 tristate "support SPI bus connection"
280 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
281 help
282 Say Y here if the touchscreen is connected via SPI bus.
283
284 To compile this driver as a module, choose M here: the
285 module will be called cyttsp4_spi.
286
287config TOUCHSCREEN_CYTTSP5
288 tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
289 depends on I2C
290 select REGMAP_I2C
291 select CRC_ITU_T
292 help
293 Driver for Parade TrueTouch Standard Product Generation 5
294 touchscreen controllers. I2C bus interface support only.
295
296 Say Y here if you have a Cypress Gen5 touchscreen.
297
298 If unsure, say N.
299
300 To compile this driver as a module, choose M here: the
301 module will be called cyttsp5.
302
303config TOUCHSCREEN_DA9034
304 tristate "Touchscreen support for Dialog Semiconductor DA9034"
305 depends on PMIC_DA903X
306 default y
307 help
308 Say Y here to enable the support for the touchscreen found
309 on Dialog Semiconductor DA9034 PMIC.
310
311 If unsure, say N.
312
313 To compile this driver as a module, choose M here: the
314 module will be called da9034-ts.
315
316config TOUCHSCREEN_DA9052
317 tristate "Dialog DA9052/DA9053 TSI"
318 depends on PMIC_DA9052
319 help
320 Say Y here to support the touchscreen found on Dialog Semiconductor
321 DA9052-BC and DA9053-AA/Bx PMICs.
322
323 If unsure, say N.
324
325 To compile this driver as a module, choose M here: the
326 module will be called da9052_tsi.
327
328config TOUCHSCREEN_DYNAPRO
329 tristate "Dynapro serial touchscreen"
330 select SERIO
331 help
332 Say Y here if you have a Dynapro serial touchscreen connected to
333 your system.
334
335 If unsure, say N.
336
337 To compile this driver as a module, choose M here: the
338 module will be called dynapro.
339
340config TOUCHSCREEN_HAMPSHIRE
341 tristate "Hampshire serial touchscreen"
342 select SERIO
343 help
344 Say Y here if you have a Hampshire serial touchscreen connected to
345 your system.
346
347 If unsure, say N.
348
349 To compile this driver as a module, choose M here: the
350 module will be called hampshire.
351
352config TOUCHSCREEN_EETI
353 tristate "EETI touchscreen panel support"
354 depends on I2C
355 help
356 Say Y here to enable support for I2C connected EETI touch panels.
357
358 To compile this driver as a module, choose M here: the
359 module will be called eeti_ts.
360
361config TOUCHSCREEN_EGALAX
362 tristate "EETI eGalax multi-touch panel support"
363 depends on I2C && OF
364 help
365 Say Y here to enable support for I2C connected EETI
366 eGalax multi-touch panels.
367
368 To compile this driver as a module, choose M here: the
369 module will be called egalax_ts.
370
371config TOUCHSCREEN_EGALAX_SERIAL
372 tristate "EETI eGalax serial touchscreen"
373 select SERIO
374 help
375 Say Y here to enable support for serial connected EETI
376 eGalax touch panels.
377
378 To compile this driver as a module, choose M here: the
379 module will be called egalax_ts_serial.
380
381config TOUCHSCREEN_EXC3000
382 tristate "EETI EXC3000 multi-touch panel support"
383 depends on I2C
384 help
385 Say Y here to enable support for I2C connected EETI
386 EXC3000 multi-touch panels.
387
388 To compile this driver as a module, choose M here: the
389 module will be called exc3000.
390
391config TOUCHSCREEN_FUJITSU
392 tristate "Fujitsu serial touchscreen"
393 select SERIO
394 help
395 Say Y here if you have the Fujitsu touchscreen (such as one
396 installed in Lifebook P series laptop) connected to your
397 system.
398
399 If unsure, say N.
400
401 To compile this driver as a module, choose M here: the
402 module will be called fujitsu-ts.
403
404config TOUCHSCREEN_GOODIX
405 tristate "Goodix I2C touchscreen"
406 depends on I2C
407 depends on GPIOLIB || COMPILE_TEST
408 help
409 Say Y here if you have the Goodix touchscreen (such as one
410 installed in Onda v975w tablets) connected to your
411 system. It also supports 5-finger chip models, which can be
412 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
413
414 If unsure, say N.
415
416 To compile this driver as a module, choose M here: the
417 module will be called goodix.
418
419config TOUCHSCREEN_HIDEEP
420 tristate "HiDeep Touch IC"
421 depends on I2C
422 help
423 Say Y here if you have a touchscreen using HiDeep.
424
425 If unsure, say N.
426
427 To compile this driver as a module, choose M here : the
428 module will be called hideep_ts.
429
430config TOUCHSCREEN_HYCON_HY46XX
431 tristate "Hycon hy46xx touchscreen support"
432 depends on I2C
433 help
434 Say Y here if you have a touchscreen using Hycon hy46xx
435
436 If unsure, say N.
437
438 To compile this driver as a module, choose M here: the
439 module will be called hycon-hy46xx.
440
441config TOUCHSCREEN_HYNITRON_CSTXXX
442 tristate "Hynitron touchscreen support"
443 depends on I2C
444 help
445 Say Y here if you have a touchscreen using a Hynitron
446 touchscreen controller.
447
448 If unsure, say N.
449
450 To compile this driver as a module, choose M here: the
451 module will be called hynitron-cstxxx.
452
453config TOUCHSCREEN_ILI210X
454 tristate "Ilitek ILI210X based touchscreen"
455 depends on I2C
456 select CRC_CCITT
457 help
458 Say Y here if you have a ILI210X based touchscreen
459 controller. This driver supports models ILI2102,
460 ILI2102s, ILI2103, ILI2103s and ILI2105.
461 Such kind of chipsets can be found in Amazon Kindle Fire
462 touchscreens.
463
464 If unsure, say N.
465
466 To compile this driver as a module, choose M here: the
467 module will be called ili210x.
468
469config TOUCHSCREEN_ILITEK
470 tristate "Ilitek I2C 213X/23XX/25XX/Lego Series Touch ICs"
471 depends on I2C
472 help
473 Say Y here if you have touchscreen with ILITEK touch IC,
474 it supports 213X/23XX/25XX and other Lego series.
475
476 If unsure, say N.
477
478 To compile this driver as a module, choose M here: the
479 module will be called ilitek_ts_i2c.
480
481config TOUCHSCREEN_IPROC
482 tristate "IPROC touch panel driver support"
483 depends on ARCH_BCM_IPROC || COMPILE_TEST
484 help
485 Say Y here if you want to add support for the IPROC touch
486 controller to your system.
487
488 If unsure, say N.
489
490 To compile this driver as a module, choose M here: the
491 module will be called bcm_iproc_tsc.
492
493config TOUCHSCREEN_S3C2410
494 tristate "Samsung S3C2410/generic touchscreen input driver"
495 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
496 depends on S3C_ADC
497 help
498 Say Y here if you have the s3c2410 touchscreen.
499
500 If unsure, say N.
501
502 To compile this driver as a module, choose M here: the
503 module will be called s3c2410_ts.
504
505config TOUCHSCREEN_S6SY761
506 tristate "Samsung S6SY761 Touchscreen driver"
507 depends on I2C
508 help
509 Say Y if you have the Samsung S6SY761 driver
510
511 If unsure, say N
512
513 To compile this driver as module, choose M here: the
514 module will be called s6sy761.
515
516config TOUCHSCREEN_GUNZE
517 tristate "Gunze AHL-51S touchscreen"
518 select SERIO
519 help
520 Say Y here if you have the Gunze AHL-51 touchscreen connected to
521 your system.
522
523 If unsure, say N.
524
525 To compile this driver as a module, choose M here: the
526 module will be called gunze.
527
528config TOUCHSCREEN_EKTF2127
529 tristate "Elan eKTF2127 I2C touchscreen"
530 depends on I2C
531 help
532 Say Y here if you have an Elan eKTF2127 touchscreen
533 connected to your system.
534
535 If unsure, say N.
536
537 To compile this driver as a module, choose M here: the
538 module will be called ektf2127.
539
540config TOUCHSCREEN_ELAN
541 tristate "Elan eKTH I2C touchscreen"
542 depends on I2C
543 help
544 Say Y here if you have an Elan eKTH I2C touchscreen
545 connected to your system.
546
547 If unsure, say N.
548
549 To compile this driver as a module, choose M here: the
550 module will be called elants_i2c.
551
552config TOUCHSCREEN_ELO
553 tristate "Elo serial touchscreens"
554 select SERIO
555 help
556 Say Y here if you have an Elo serial touchscreen connected to
557 your system.
558
559 If unsure, say N.
560
561 To compile this driver as a module, choose M here: the
562 module will be called elo.
563
564config TOUCHSCREEN_WACOM_W8001
565 tristate "Wacom W8001 penabled serial touchscreen"
566 select SERIO
567 help
568 Say Y here if you have an Wacom W8001 penabled serial touchscreen
569 connected to your system.
570
571 If unsure, say N.
572
573 To compile this driver as a module, choose M here: the
574 module will be called wacom_w8001.
575
576config TOUCHSCREEN_WACOM_I2C
577 tristate "Wacom Tablet support (I2C)"
578 depends on I2C
579 help
580 Say Y here if you want to use the I2C version of the Wacom
581 Pen Tablet.
582
583 If unsure, say N.
584
585 To compile this driver as a module, choose M here: the module
586 will be called wacom_i2c.
587
588config TOUCHSCREEN_LPC32XX
589 tristate "LPC32XX touchscreen controller"
590 depends on ARCH_LPC32XX
591 help
592 Say Y here if you have a LPC32XX device and want
593 to support the built-in touchscreen.
594
595 To compile this driver as a module, choose M here: the
596 module will be called lpc32xx_ts.
597
598config TOUCHSCREEN_MAX11801
599 tristate "MAX11801 based touchscreens"
600 depends on I2C
601 help
602 Say Y here if you have a MAX11801 based touchscreen
603 controller.
604
605 If unsure, say N.
606
607 To compile this driver as a module, choose M here: the
608 module will be called max11801_ts.
609
610config TOUCHSCREEN_MCS5000
611 tristate "MELFAS MCS-5000 touchscreen"
612 depends on I2C
613 help
614 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
615 chip in your system.
616
617 If unsure, say N.
618
619 To compile this driver as a module, choose M here: the
620 module will be called mcs5000_ts.
621
622config TOUCHSCREEN_MMS114
623 tristate "MELFAS MMS114 touchscreen"
624 depends on I2C
625 help
626 Say Y here if you have the MELFAS MMS114 touchscreen controller
627 chip in your system.
628
629 If unsure, say N.
630
631 To compile this driver as a module, choose M here: the
632 module will be called mms114.
633
634config TOUCHSCREEN_MELFAS_MIP4
635 tristate "MELFAS MIP4 Touchscreen"
636 depends on I2C
637 help
638 Say Y here if you have a MELFAS MIP4 Touchscreen device.
639
640 If unsure, say N.
641
642 To compile this driver as a module, choose M here:
643 the module will be called melfas_mip4.
644
645config TOUCHSCREEN_MSG2638
646 tristate "MStar msg2638 touchscreen support"
647 depends on I2C
648 depends on GPIOLIB || COMPILE_TEST
649 help
650 Say Y here if you have an I2C touchscreen using MStar msg2638.
651
652 If unsure, say N.
653
654 To compile this driver as a module, choose M here: the
655 module will be called msg2638.
656
657config TOUCHSCREEN_MTOUCH
658 tristate "MicroTouch serial touchscreens"
659 select SERIO
660 help
661 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
662 your system.
663
664 If unsure, say N.
665
666 To compile this driver as a module, choose M here: the
667 module will be called mtouch.
668
669config TOUCHSCREEN_IMAGIS
670 tristate "Imagis touchscreen support"
671 depends on I2C
672 help
673 Say Y here if you have an Imagis IST30xxC touchscreen.
674 If unsure, say N.
675
676 To compile this driver as a module, choose M here: the
677 module will be called imagis.
678
679config TOUCHSCREEN_IMX6UL_TSC
680 tristate "Freescale i.MX6UL touchscreen controller"
681 depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM
682 help
683 Say Y here if you have a Freescale i.MX6UL, and want to
684 use the internal touchscreen controller.
685
686 If unsure, say N.
687
688 To compile this driver as a module, choose M here: the
689 module will be called imx6ul_tsc.
690
691config TOUCHSCREEN_INEXIO
692 tristate "iNexio serial touchscreens"
693 select SERIO
694 help
695 Say Y here if you have an iNexio serial touchscreen connected to
696 your system.
697
698 If unsure, say N.
699
700 To compile this driver as a module, choose M here: the
701 module will be called inexio.
702
703config TOUCHSCREEN_MK712
704 tristate "ICS MicroClock MK712 touchscreen"
705 help
706 Say Y here if you have the ICS MicroClock MK712 touchscreen
707 controller chip in your system.
708
709 If unsure, say N.
710
711 To compile this driver as a module, choose M here: the
712 module will be called mk712.
713
714config TOUCHSCREEN_HP600
715 tristate "HP Jornada 6xx touchscreen"
716 depends on SH_HP6XX && SH_ADC
717 help
718 Say Y here if you have a HP Jornada 620/660/680/690 and want to
719 support the built-in touchscreen.
720
721 To compile this driver as a module, choose M here: the
722 module will be called hp680_ts_input.
723
724config TOUCHSCREEN_HP7XX
725 tristate "HP Jornada 7xx touchscreen"
726 depends on SA1100_JORNADA720_SSP
727 help
728 Say Y here if you have a HP Jornada 710/720/728 and want
729 to support the built-in touchscreen.
730
731 To compile this driver as a module, choose M here: the
732 module will be called jornada720_ts.
733
734config TOUCHSCREEN_IPAQ_MICRO
735 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
736 depends on MFD_IPAQ_MICRO
737 help
738 Say Y here to enable support for the touchscreen attached to
739 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
740
741 If unsure, say N.
742
743 To compile this driver as a module, choose M here: the
744 module will be called ipaq-micro-ts.
745
746config TOUCHSCREEN_HTCPEN
747 tristate "HTC Shift X9500 touchscreen"
748 depends on ISA
749 help
750 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
751 Clio / Shangrila and want to support the built-in touchscreen.
752
753 If unsure, say N.
754
755 To compile this driver as a module, choose M here: the
756 module will be called htcpen.
757
758config TOUCHSCREEN_PENMOUNT
759 tristate "Penmount serial touchscreen"
760 select SERIO
761 help
762 Say Y here if you have a Penmount serial touchscreen connected to
763 your system.
764
765 If unsure, say N.
766
767 To compile this driver as a module, choose M here: the
768 module will be called penmount.
769
770config TOUCHSCREEN_EDT_FT5X06
771 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
772 depends on I2C
773 help
774 Say Y here if you have an EDT "Polytouch" touchscreen based
775 on the FocalTech FT5x06 family of controllers connected to
776 your system.
777
778 If unsure, say N.
779
780 To compile this driver as a module, choose M here: the
781 module will be called edt-ft5x06.
782
783config TOUCHSCREEN_RASPBERRYPI_FW
784 tristate "Raspberry Pi's firmware base touch screen support"
785 depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
786 help
787 Say Y here if you have the official Raspberry Pi 7 inch screen on
788 your system.
789
790 If unsure, say N.
791
792 To compile this driver as a module, choose M here: the
793 module will be called raspberrypi-ts.
794
795config TOUCHSCREEN_MIGOR
796 tristate "Renesas MIGO-R touchscreen"
797 depends on (SH_MIGOR || COMPILE_TEST) && I2C
798 help
799 Say Y here to enable MIGO-R touchscreen support.
800
801 If unsure, say N.
802
803 To compile this driver as a module, choose M here: the
804 module will be called migor_ts.
805
806config TOUCHSCREEN_TOUCHRIGHT
807 tristate "Touchright serial touchscreen"
808 select SERIO
809 help
810 Say Y here if you have a Touchright serial touchscreen connected to
811 your system.
812
813 If unsure, say N.
814
815 To compile this driver as a module, choose M here: the
816 module will be called touchright.
817
818config TOUCHSCREEN_TOUCHWIN
819 tristate "Touchwin serial touchscreen"
820 select SERIO
821 help
822 Say Y here if you have a Touchwin serial touchscreen connected to
823 your system.
824
825 If unsure, say N.
826
827 To compile this driver as a module, choose M here: the
828 module will be called touchwin.
829
830config TOUCHSCREEN_TI_AM335X_TSC
831 tristate "TI Touchscreen Interface"
832 depends on MFD_TI_AM335X_TSCADC
833 help
834 Say Y here if you have 4/5/8 wire touchscreen controller
835 to be connected to the ADC controller on your TI AM335x SoC.
836
837 If unsure, say N.
838
839 To compile this driver as a module, choose M here: the
840 module will be called ti_am335x_tsc.
841
842config TOUCHSCREEN_UCB1400
843 tristate "Philips UCB1400 touchscreen"
844 depends on AC97_BUS
845 depends on UCB1400_CORE
846 help
847 This enables support for the Philips UCB1400 touchscreen interface.
848 The UCB1400 is an AC97 audio codec. The touchscreen interface
849 will be initialized only after the ALSA subsystem has been
850 brought up and the UCB1400 detected. You therefore have to
851 configure ALSA support as well (either built-in or modular,
852 independently of whether this driver is itself built-in or
853 modular) for this driver to work.
854
855 To compile this driver as a module, choose M here: the
856 module will be called ucb1400_ts.
857
858config TOUCHSCREEN_PIXCIR
859 tristate "PIXCIR I2C touchscreens"
860 depends on I2C
861 help
862 Say Y here if you have a pixcir i2c touchscreen
863 controller.
864
865 If unsure, say N.
866
867 To compile this driver as a module, choose M here: the
868 module will be called pixcir_i2c_ts.
869
870config TOUCHSCREEN_WDT87XX_I2C
871 tristate "Weida HiTech I2C touchscreen"
872 depends on I2C
873 help
874 Say Y here if you have a Weida WDT87XX I2C touchscreen
875 connected to your system.
876
877 If unsure, say N.
878
879 To compile this driver as a module, choose M here: the
880 module will be called wdt87xx_i2c.
881
882config TOUCHSCREEN_WM831X
883 tristate "Support for WM831x touchscreen controllers"
884 depends on MFD_WM831X
885 help
886 This enables support for the touchscreen controller on the WM831x
887 series of PMICs.
888
889 To compile this driver as a module, choose M here: the
890 module will be called wm831x-ts.
891
892config TOUCHSCREEN_WM97XX
893 tristate "Support for WM97xx AC97 touchscreen controllers"
894 depends on AC97_BUS || AC97_BUS_NEW
895 help
896 Say Y here if you have a Wolfson Microelectronics WM97xx
897 touchscreen connected to your system. Note that this option
898 only enables core driver, you will also need to select
899 support for appropriate chip below.
900
901 If unsure, say N.
902
903 To compile this driver as a module, choose M here: the
904 module will be called wm97xx-ts.
905
906config TOUCHSCREEN_WM9705
907 bool "WM9705 Touchscreen interface support"
908 depends on TOUCHSCREEN_WM97XX
909 default y
910 help
911 Say Y here to enable support for the Wolfson Microelectronics
912 WM9705 touchscreen controller.
913
914config TOUCHSCREEN_WM9712
915 bool "WM9712 Touchscreen interface support"
916 depends on TOUCHSCREEN_WM97XX
917 default y
918 help
919 Say Y here to enable support for the Wolfson Microelectronics
920 WM9712 touchscreen controller.
921
922config TOUCHSCREEN_WM9713
923 bool "WM9713 Touchscreen interface support"
924 depends on TOUCHSCREEN_WM97XX
925 default y
926 help
927 Say Y here to enable support for the Wolfson Microelectronics
928 WM9713 touchscreen controller.
929
930config TOUCHSCREEN_WM97XX_MAINSTONE
931 tristate "WM97xx Mainstone/Palm accelerated touch"
932 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
933 depends on SND_PXA2XX_LIB_AC97
934 help
935 Say Y here for support for streaming mode with WM97xx touchscreens
936 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
937
938 If unsure, say N.
939
940 To compile this driver as a module, choose M here: the
941 module will be called mainstone-wm97xx.
942
943config TOUCHSCREEN_WM97XX_ZYLONITE
944 tristate "Zylonite accelerated touch"
945 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
946 depends on SND_PXA2XX_LIB_AC97
947 select TOUCHSCREEN_WM9713
948 help
949 Say Y here for support for streaming mode with the touchscreen
950 on Zylonite systems.
951
952 If unsure, say N.
953
954 To compile this driver as a module, choose M here: the
955 module will be called zylonite-wm97xx.
956
957config TOUCHSCREEN_USB_COMPOSITE
958 tristate "USB Touchscreen Driver"
959 depends on USB_ARCH_HAS_HCD
960 select USB
961 help
962 USB Touchscreen driver for:
963 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
964 - PanJit TouchSet USB
965 - 3M MicroTouch USB (EX II series)
966 - ITM
967 - some other eTurboTouch
968 - Gunze AHL61
969 - DMC TSC-10/25
970 - IRTOUCHSYSTEMS/UNITOP
971 - IdealTEK URTC1000
972 - GoTop Super_Q2/GogoPen/PenPower tablets
973 - JASTEC USB Touch Controller/DigiTech DTR-02U
974 - Zytronic controllers
975 - Elo TouchSystems 2700 IntelliTouch
976 - EasyTouch USB Touch Controller from Data Module
977 - e2i (Mimo monitors)
978
979 Have a look at <http://linux.chapter7.ch/touchkit/> for
980 a usage description and the required user-space stuff.
981
982 To compile this driver as a module, choose M here: the
983 module will be called usbtouchscreen.
984
985config TOUCHSCREEN_MXS_LRADC
986 tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
987 depends on MFD_MXS_LRADC
988 help
989 Say Y here if you have a touchscreen connected to the low-resolution
990 analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
991
992 To compile this driver as a module, choose M here: the module will be
993 called mxs-lradc-ts.
994
995config TOUCHSCREEN_MX25
996 tristate "Freescale i.MX25 touchscreen input driver"
997 depends on MFD_MX25_TSADC
998 help
999 Enable support for touchscreen connected to your i.MX25.
1000
1001 To compile this driver as a module, choose M here: the
1002 module will be called fsl-imx25-tcq.
1003
1004config TOUCHSCREEN_MC13783
1005 tristate "Freescale MC13783 touchscreen input driver"
1006 depends on MFD_MC13XXX
1007 help
1008 Say Y here if you have an Freescale MC13783 PMIC on your
1009 board and want to use its touchscreen
1010
1011 If unsure, say N.
1012
1013 To compile this driver as a module, choose M here: the
1014 module will be called mc13783_ts.
1015
1016config TOUCHSCREEN_USB_EGALAX
1017 default y
1018 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
1019 depends on TOUCHSCREEN_USB_COMPOSITE
1020
1021config TOUCHSCREEN_USB_PANJIT
1022 default y
1023 bool "PanJit device support" if EXPERT
1024 depends on TOUCHSCREEN_USB_COMPOSITE
1025
1026config TOUCHSCREEN_USB_3M
1027 default y
1028 bool "3M/Microtouch EX II series device support" if EXPERT
1029 depends on TOUCHSCREEN_USB_COMPOSITE
1030
1031config TOUCHSCREEN_USB_ITM
1032 default y
1033 bool "ITM device support" if EXPERT
1034 depends on TOUCHSCREEN_USB_COMPOSITE
1035
1036config TOUCHSCREEN_USB_ETURBO
1037 default y
1038 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
1039 depends on TOUCHSCREEN_USB_COMPOSITE
1040
1041config TOUCHSCREEN_USB_GUNZE
1042 default y
1043 bool "Gunze AHL61 device support" if EXPERT
1044 depends on TOUCHSCREEN_USB_COMPOSITE
1045
1046config TOUCHSCREEN_USB_DMC_TSC10
1047 default y
1048 bool "DMC TSC-10/25 device support" if EXPERT
1049 depends on TOUCHSCREEN_USB_COMPOSITE
1050
1051config TOUCHSCREEN_USB_IRTOUCH
1052 default y
1053 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
1054 depends on TOUCHSCREEN_USB_COMPOSITE
1055
1056config TOUCHSCREEN_USB_IDEALTEK
1057 default y
1058 bool "IdealTEK URTC1000 device support" if EXPERT
1059 depends on TOUCHSCREEN_USB_COMPOSITE
1060
1061config TOUCHSCREEN_USB_GENERAL_TOUCH
1062 default y
1063 bool "GeneralTouch Touchscreen device support" if EXPERT
1064 depends on TOUCHSCREEN_USB_COMPOSITE
1065
1066config TOUCHSCREEN_USB_GOTOP
1067 default y
1068 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
1069 depends on TOUCHSCREEN_USB_COMPOSITE
1070
1071config TOUCHSCREEN_USB_JASTEC
1072 default y
1073 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
1074 depends on TOUCHSCREEN_USB_COMPOSITE
1075
1076config TOUCHSCREEN_USB_ELO
1077 default y
1078 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
1079 depends on TOUCHSCREEN_USB_COMPOSITE
1080
1081config TOUCHSCREEN_USB_E2I
1082 default y
1083 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
1084 depends on TOUCHSCREEN_USB_COMPOSITE
1085
1086config TOUCHSCREEN_USB_ZYTRONIC
1087 default y
1088 bool "Zytronic controller" if EXPERT
1089 depends on TOUCHSCREEN_USB_COMPOSITE
1090
1091config TOUCHSCREEN_USB_ETT_TC45USB
1092 default y
1093 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
1094 depends on TOUCHSCREEN_USB_COMPOSITE
1095
1096config TOUCHSCREEN_USB_NEXIO
1097 default y
1098 bool "NEXIO/iNexio device support" if EXPERT
1099 depends on TOUCHSCREEN_USB_COMPOSITE
1100
1101config TOUCHSCREEN_USB_EASYTOUCH
1102 default y
1103 bool "EasyTouch USB Touch controller device support" if EXPERT
1104 depends on TOUCHSCREEN_USB_COMPOSITE
1105 help
1106 Say Y here if you have an EasyTouch USB Touch controller.
1107 If unsure, say N.
1108
1109config TOUCHSCREEN_TOUCHIT213
1110 tristate "Sahara TouchIT-213 touchscreen"
1111 select SERIO
1112 help
1113 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1114
1115 If unsure, say N.
1116
1117 To compile this driver as a module, choose M here: the
1118 module will be called touchit213.
1119
1120config TOUCHSCREEN_TS4800
1121 tristate "TS-4800 touchscreen"
1122 depends on HAS_IOMEM && OF
1123 depends on SOC_IMX51 || COMPILE_TEST
1124 select MFD_SYSCON
1125 help
1126 Say Y here if you have a touchscreen on a TS-4800 board.
1127
1128 On TS-4800, the touchscreen is not handled directly by Linux but by
1129 a companion FPGA.
1130
1131 If unsure, say N.
1132
1133 To compile this driver as a module, choose M here: the
1134 module will be called ts4800_ts.
1135
1136config TOUCHSCREEN_TSC_SERIO
1137 tristate "TSC-10/25/40 serial touchscreen support"
1138 select SERIO
1139 help
1140 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1141 to your system.
1142
1143 If unsure, say N.
1144
1145 To compile this driver as a module, choose M here: the
1146 module will be called tsc40.
1147
1148config TOUCHSCREEN_TSC200X_CORE
1149 tristate
1150
1151config TOUCHSCREEN_TSC2004
1152 tristate "TSC2004 based touchscreens"
1153 depends on I2C
1154 select REGMAP_I2C
1155 select TOUCHSCREEN_TSC200X_CORE
1156 help
1157 Say Y here if you have a TSC2004 based touchscreen.
1158
1159 If unsure, say N.
1160
1161 To compile this driver as a module, choose M here: the
1162 module will be called tsc2004.
1163
1164config TOUCHSCREEN_TSC2005
1165 tristate "TSC2005 based touchscreens"
1166 depends on SPI_MASTER
1167 select REGMAP_SPI
1168 select TOUCHSCREEN_TSC200X_CORE
1169 help
1170 Say Y here if you have a TSC2005 based touchscreen.
1171
1172 If unsure, say N.
1173
1174 To compile this driver as a module, choose M here: the
1175 module will be called tsc2005.
1176
1177config TOUCHSCREEN_TSC2007
1178 tristate "TSC2007 based touchscreens"
1179 depends on I2C
1180 help
1181 Say Y here if you have a TSC2007 based touchscreen.
1182
1183 If unsure, say N.
1184
1185 To compile this driver as a module, choose M here: the
1186 module will be called tsc2007.
1187
1188config TOUCHSCREEN_TSC2007_IIO
1189 bool "IIO interface for external ADC input and temperature"
1190 depends on TOUCHSCREEN_TSC2007
1191 depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
1192 help
1193 Saying Y here adds an iio interface to the tsc2007 which
1194 provides values for the AUX input (used for e.g. battery
1195 or ambient light monitoring), temperature and raw input
1196 values.
1197
1198config TOUCHSCREEN_PCAP
1199 tristate "Motorola PCAP touchscreen"
1200 depends on EZX_PCAP
1201 help
1202 Say Y here if you have a Motorola EZX telephone and
1203 want to enable support for the built-in touchscreen.
1204
1205 To compile this driver as a module, choose M here: the
1206 module will be called pcap_ts.
1207
1208config TOUCHSCREEN_RM_TS
1209 tristate "Raydium I2C Touchscreen"
1210 depends on I2C
1211 depends on GPIOLIB || COMPILE_TEST
1212 help
1213 Say Y here if you have Raydium series I2C touchscreen,
1214 such as RM32380, connected to your system.
1215
1216 If unsure, say N.
1217
1218 To compile this driver as a module, choose M here: the
1219 module will be called raydium_i2c_ts.
1220
1221config TOUCHSCREEN_SILEAD
1222 tristate "Silead I2C touchscreen"
1223 depends on I2C
1224 help
1225 Say Y here if you have the Silead touchscreen connected to
1226 your system.
1227
1228 If unsure, say N.
1229
1230 To compile this driver as a module, choose M here: the
1231 module will be called silead.
1232
1233config TOUCHSCREEN_SIS_I2C
1234 tristate "SiS 9200 family I2C touchscreen"
1235 depends on I2C
1236 select CRC_ITU_T
1237 depends on GPIOLIB || COMPILE_TEST
1238 help
1239 This enables support for SiS 9200 family over I2C based touchscreens.
1240
1241 If unsure, say N.
1242
1243 To compile this driver as a module, choose M here: the
1244 module will be called sis_i2c.
1245
1246config TOUCHSCREEN_ST1232
1247 tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
1248 depends on I2C
1249 help
1250 Say Y here if you want to support the Sitronix ST1232
1251 or ST1633 touchscreen controller.
1252
1253 If unsure, say N.
1254
1255 To compile this driver as a module, choose M here: the
1256 module will be called st1232_ts.
1257
1258config TOUCHSCREEN_STMFTS
1259 tristate "STMicroelectronics STMFTS touchscreen"
1260 depends on I2C
1261 depends on LEDS_CLASS
1262 help
1263 Say Y here if you want support for STMicroelectronics
1264 STMFTS touchscreen.
1265
1266 To compile this driver as a module, choose M here: the
1267 module will be called stmfts.
1268
1269config TOUCHSCREEN_STMPE
1270 tristate "STMicroelectronics STMPE touchscreens"
1271 depends on MFD_STMPE
1272 depends on OF
1273 help
1274 Say Y here if you want support for STMicroelectronics
1275 STMPE touchscreen controllers.
1276
1277 To compile this driver as a module, choose M here: the
1278 module will be called stmpe-ts.
1279
1280config TOUCHSCREEN_SUN4I
1281 tristate "Allwinner sun4i resistive touchscreen controller support"
1282 depends on ARCH_SUNXI || COMPILE_TEST
1283 depends on HWMON
1284 depends on THERMAL || !THERMAL_OF
1285 help
1286 This selects support for the resistive touchscreen controller
1287 found on Allwinner sunxi SoCs.
1288
1289 To compile this driver as a module, choose M here: the
1290 module will be called sun4i-ts.
1291
1292config TOUCHSCREEN_SUR40
1293 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1294 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1295 depends on VIDEO_DEV
1296 select VIDEOBUF2_DMA_SG
1297 help
1298 Say Y here if you want support for the Samsung SUR40 touchscreen
1299 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1300
1301 To compile this driver as a module, choose M here: the
1302 module will be called sur40.
1303
1304config TOUCHSCREEN_SURFACE3_SPI
1305 tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1306 depends on SPI
1307 depends on GPIOLIB || COMPILE_TEST
1308 help
1309 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1310 controller chip as found on the Surface 3 in your system.
1311
1312 If unsure, say N.
1313
1314 To compile this driver as a module, choose M here: the
1315 module will be called surface3_spi.
1316
1317config TOUCHSCREEN_SX8654
1318 tristate "Semtech SX8654 touchscreen"
1319 depends on I2C
1320 help
1321 Say Y here if you have a Semtech SX8654 touchscreen controller.
1322
1323 If unsure, say N
1324
1325 To compile this driver as a module, choose M here: the
1326 module will be called sx8654.
1327
1328config TOUCHSCREEN_TPS6507X
1329 tristate "TPS6507x based touchscreens"
1330 depends on I2C
1331 help
1332 Say Y here if you have a TPS6507x based touchscreen
1333 controller.
1334
1335 If unsure, say N.
1336
1337 To compile this driver as a module, choose M here: the
1338 module will be called tps6507x_ts.
1339
1340config TOUCHSCREEN_ZET6223
1341 tristate "Zeitec ZET6223 touchscreen driver"
1342 depends on I2C
1343 help
1344 Say Y here if you have a touchscreen using Zeitec ZET6223
1345
1346 If unsure, say N.
1347
1348 To compile this driver as a module, choose M here: the
1349 module will be called zet6223.
1350
1351config TOUCHSCREEN_ZFORCE
1352 tristate "Neonode zForce infrared touchscreens"
1353 depends on I2C
1354 depends on GPIOLIB || COMPILE_TEST
1355 help
1356 Say Y here if you have a touchscreen using the zforce
1357 infraread technology from Neonode.
1358
1359 If unsure, say N.
1360
1361 To compile this driver as a module, choose M here: the
1362 module will be called zforce_ts.
1363
1364config TOUCHSCREEN_COLIBRI_VF50
1365 tristate "Toradex Colibri on board touchscreen driver"
1366 depends on IIO
1367 depends on GPIOLIB || COMPILE_TEST
1368 help
1369 Say Y here if you have a Colibri VF50 and plan to use
1370 the on-board provided 4-wire touchscreen driver.
1371
1372 If unsure, say N.
1373
1374 To compile this driver as a module, choose M here: the
1375 module will be called colibri_vf50_ts.
1376
1377config TOUCHSCREEN_ROHM_BU21023
1378 tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1379 depends on I2C
1380 help
1381 Say Y here if you have a touchscreen using ROHM BU21023/24.
1382
1383 If unsure, say N.
1384
1385 To compile this driver as a module, choose M here: the
1386 module will be called bu21023_ts.
1387
1388config TOUCHSCREEN_IQS5XX
1389 tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
1390 depends on I2C
1391 help
1392 Say Y to enable support for the Azoteq IQS550/572/525
1393 family of trackpad/touchscreen controllers.
1394
1395 To compile this driver as a module, choose M here: the
1396 module will be called iqs5xx.
1397
1398config TOUCHSCREEN_ZINITIX
1399 tristate "Zinitix touchscreen support"
1400 depends on I2C
1401 help
1402 Say Y here if you have a touchscreen using Zinitix bt541,
1403 or something similar enough.
1404
1405 If unsure, say N.
1406
1407 To compile this driver as a module, choose M here: the
1408 module will be called zinitix.
1409
1410config TOUCHSCREEN_HIMAX_HX83112B
1411 tristate "Himax hx83112b touchscreen driver"
1412 depends on I2C
1413 select REGMAP_I2C
1414 help
1415 Say Y here to enable support for Himax hx83112b touchscreens.
1416
1417 If unsure, say N.
1418
1419 To compile this driver as a module, choose M here: the
1420 module will be called himax_hx83112b.
1421
1422endif
1#
2# Touchscreen driver configuration
3#
4menuconfig INPUT_TOUCHSCREEN
5 bool "Touchscreens"
6 help
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
9
10 If unsure, say Y.
11
12if INPUT_TOUCHSCREEN
13
14config TOUCHSCREEN_88PM860X
15 tristate "Marvell 88PM860x touchscreen"
16 depends on MFD_88PM860X
17 help
18 Say Y here if you have a 88PM860x PMIC and want to enable
19 support for the built-in touchscreen.
20
21 If unsure, say N.
22
23 To compile this driver as a module, choose M here: the
24 module will be called 88pm860x-ts.
25
26config TOUCHSCREEN_ADS7846
27 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
28 depends on SPI_MASTER
29 depends on HWMON = n || HWMON
30 help
31 Say Y here if you have a touchscreen interface using the
32 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
33 and your board-specific setup code includes that in its
34 table of SPI devices.
35
36 If HWMON is selected, and the driver is told the reference voltage
37 on your board, you will also get hwmon interfaces for the voltage
38 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
39
40 If unsure, say N (but it's safe to say "Y").
41
42 To compile this driver as a module, choose M here: the
43 module will be called ads7846.
44
45config TOUCHSCREEN_AD7877
46 tristate "AD7877 based touchscreens"
47 depends on SPI_MASTER
48 help
49 Say Y here if you have a touchscreen interface using the
50 AD7877 controller, and your board-specific initialization
51 code includes that in its table of SPI devices.
52
53 If unsure, say N (but it's safe to say "Y").
54
55 To compile this driver as a module, choose M here: the
56 module will be called ad7877.
57
58config TOUCHSCREEN_AD7879
59 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
60 help
61 Say Y here if you want to support a touchscreen interface using
62 the AD7879-1/AD7889-1 controller.
63
64 You should select a bus connection too.
65
66 To compile this driver as a module, choose M here: the
67 module will be called ad7879.
68
69config TOUCHSCREEN_AD7879_I2C
70 tristate "support I2C bus connection"
71 depends on TOUCHSCREEN_AD7879 && I2C
72 help
73 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
74
75 To compile this driver as a module, choose M here: the
76 module will be called ad7879-i2c.
77
78config TOUCHSCREEN_AD7879_SPI
79 tristate "support SPI bus connection"
80 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
81 help
82 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
83
84 If unsure, say N (but it's safe to say "Y").
85
86 To compile this driver as a module, choose M here: the
87 module will be called ad7879-spi.
88
89config TOUCHSCREEN_ATMEL_MXT
90 tristate "Atmel mXT I2C Touchscreen"
91 depends on I2C
92 help
93 Say Y here if you have Atmel mXT series I2C touchscreen,
94 such as AT42QT602240/ATMXT224, connected to your system.
95
96 If unsure, say N.
97
98 To compile this driver as a module, choose M here: the
99 module will be called atmel_mxt_ts.
100
101config TOUCHSCREEN_BITSY
102 tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
103 depends on SA1100_BITSY
104 select SERIO
105 help
106 Say Y here if you have the h3600 (Bitsy) touchscreen.
107
108 If unsure, say N.
109
110 To compile this driver as a module, choose M here: the
111 module will be called h3600_ts_input.
112
113config TOUCHSCREEN_BU21013
114 tristate "BU21013 based touch panel controllers"
115 depends on I2C
116 help
117 Say Y here if you have a bu21013 touchscreen connected to
118 your system.
119
120 If unsure, say N.
121
122 To compile this driver as a module, choose M here: the
123 module will be called bu21013_ts.
124
125config TOUCHSCREEN_CY8CTMG110
126 tristate "cy8ctmg110 touchscreen"
127 depends on I2C
128 depends on GPIOLIB
129
130 help
131 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
132 an AAVA device.
133
134 If unsure, say N.
135
136 To compile this driver as a module, choose M here: the
137 module will be called cy8ctmg110_ts.
138
139config TOUCHSCREEN_DA9034
140 tristate "Touchscreen support for Dialog Semiconductor DA9034"
141 depends on PMIC_DA903X
142 default y
143 help
144 Say Y here to enable the support for the touchscreen found
145 on Dialog Semiconductor DA9034 PMIC.
146
147config TOUCHSCREEN_DYNAPRO
148 tristate "Dynapro serial touchscreen"
149 select SERIO
150 help
151 Say Y here if you have a Dynapro serial touchscreen connected to
152 your system.
153
154 If unsure, say N.
155
156 To compile this driver as a module, choose M here: the
157 module will be called dynapro.
158
159config TOUCHSCREEN_HAMPSHIRE
160 tristate "Hampshire serial touchscreen"
161 select SERIO
162 help
163 Say Y here if you have a Hampshire serial touchscreen connected to
164 your system.
165
166 If unsure, say N.
167
168 To compile this driver as a module, choose M here: the
169 module will be called hampshire.
170
171config TOUCHSCREEN_EETI
172 tristate "EETI touchscreen panel support"
173 depends on I2C
174 help
175 Say Y here to enable support for I2C connected EETI touch panels.
176
177 To compile this driver as a module, choose M here: the
178 module will be called eeti_ts.
179
180config TOUCHSCREEN_FUJITSU
181 tristate "Fujitsu serial touchscreen"
182 select SERIO
183 help
184 Say Y here if you have the Fujitsu touchscreen (such as one
185 installed in Lifebook P series laptop) connected to your
186 system.
187
188 If unsure, say N.
189
190 To compile this driver as a module, choose M here: the
191 module will be called fujitsu-ts.
192
193config TOUCHSCREEN_S3C2410
194 tristate "Samsung S3C2410/generic touchscreen input driver"
195 depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
196 select S3C_ADC
197 help
198 Say Y here if you have the s3c2410 touchscreen.
199
200 If unsure, say N.
201
202 To compile this driver as a module, choose M here: the
203 module will be called s3c2410_ts.
204
205config TOUCHSCREEN_GUNZE
206 tristate "Gunze AHL-51S touchscreen"
207 select SERIO
208 help
209 Say Y here if you have the Gunze AHL-51 touchscreen connected to
210 your system.
211
212 If unsure, say N.
213
214 To compile this driver as a module, choose M here: the
215 module will be called gunze.
216
217config TOUCHSCREEN_ELO
218 tristate "Elo serial touchscreens"
219 select SERIO
220 help
221 Say Y here if you have an Elo serial touchscreen connected to
222 your system.
223
224 If unsure, say N.
225
226 To compile this driver as a module, choose M here: the
227 module will be called elo.
228
229config TOUCHSCREEN_WACOM_W8001
230 tristate "Wacom W8001 penabled serial touchscreen"
231 select SERIO
232 help
233 Say Y here if you have an Wacom W8001 penabled serial touchscreen
234 connected to your system.
235
236 If unsure, say N.
237
238 To compile this driver as a module, choose M here: the
239 module will be called wacom_w8001.
240
241config TOUCHSCREEN_LPC32XX
242 tristate "LPC32XX touchscreen controller"
243 depends on ARCH_LPC32XX
244 help
245 Say Y here if you have a LPC32XX device and want
246 to support the built-in touchscreen.
247
248 To compile this driver as a module, choose M here: the
249 module will be called lpc32xx_ts.
250
251config TOUCHSCREEN_MAX11801
252 tristate "MAX11801 based touchscreens"
253 depends on I2C
254 help
255 Say Y here if you have a MAX11801 based touchscreen
256 controller.
257
258 If unsure, say N.
259
260 To compile this driver as a module, choose M here: the
261 module will be called max11801_ts.
262
263config TOUCHSCREEN_MCS5000
264 tristate "MELFAS MCS-5000 touchscreen"
265 depends on I2C
266 help
267 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
268 chip in your system.
269
270 If unsure, say N.
271
272 To compile this driver as a module, choose M here: the
273 module will be called mcs5000_ts.
274
275config TOUCHSCREEN_MTOUCH
276 tristate "MicroTouch serial touchscreens"
277 select SERIO
278 help
279 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
280 your system.
281
282 If unsure, say N.
283
284 To compile this driver as a module, choose M here: the
285 module will be called mtouch.
286
287config TOUCHSCREEN_INEXIO
288 tristate "iNexio serial touchscreens"
289 select SERIO
290 help
291 Say Y here if you have an iNexio serial touchscreen connected to
292 your system.
293
294 If unsure, say N.
295
296 To compile this driver as a module, choose M here: the
297 module will be called inexio.
298
299config TOUCHSCREEN_INTEL_MID
300 tristate "Intel MID platform resistive touchscreen"
301 depends on INTEL_SCU_IPC
302 help
303 Say Y here if you have a Intel MID based touchscreen in
304 your system.
305
306 If unsure, say N.
307
308 To compile this driver as a module, choose M here: the
309 module will be called intel_mid_touch.
310
311config TOUCHSCREEN_MK712
312 tristate "ICS MicroClock MK712 touchscreen"
313 help
314 Say Y here if you have the ICS MicroClock MK712 touchscreen
315 controller chip in your system.
316
317 If unsure, say N.
318
319 To compile this driver as a module, choose M here: the
320 module will be called mk712.
321
322config TOUCHSCREEN_HP600
323 tristate "HP Jornada 6xx touchscreen"
324 depends on SH_HP6XX && SH_ADC
325 help
326 Say Y here if you have a HP Jornada 620/660/680/690 and want to
327 support the built-in touchscreen.
328
329 To compile this driver as a module, choose M here: the
330 module will be called hp680_ts_input.
331
332config TOUCHSCREEN_HP7XX
333 tristate "HP Jornada 7xx touchscreen"
334 depends on SA1100_JORNADA720_SSP
335 help
336 Say Y here if you have a HP Jornada 710/720/728 and want
337 to support the built-in touchscreen.
338
339 To compile this driver as a module, choose M here: the
340 module will be called jornada720_ts.
341
342config TOUCHSCREEN_HTCPEN
343 tristate "HTC Shift X9500 touchscreen"
344 depends on ISA
345 help
346 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
347 Clio / Shangrila and want to support the built-in touchscreen.
348
349 If unsure, say N.
350
351 To compile this driver as a module, choose M here: the
352 module will be called htcpen.
353
354config TOUCHSCREEN_PENMOUNT
355 tristate "Penmount serial touchscreen"
356 select SERIO
357 help
358 Say Y here if you have a Penmount serial touchscreen connected to
359 your system.
360
361 If unsure, say N.
362
363 To compile this driver as a module, choose M here: the
364 module will be called penmount.
365
366config TOUCHSCREEN_MIGOR
367 tristate "Renesas MIGO-R touchscreen"
368 depends on SH_MIGOR && I2C
369 help
370 Say Y here to enable MIGO-R touchscreen support.
371
372 If unsure, say N.
373
374 To compile this driver as a module, choose M here: the
375 module will be called migor_ts.
376
377config TOUCHSCREEN_TNETV107X
378 tristate "TI TNETV107X touchscreen support"
379 depends on ARCH_DAVINCI_TNETV107X
380 help
381 Say Y here if you want to use the TNETV107X touchscreen.
382
383 To compile this driver as a module, choose M here: the
384 module will be called tnetv107x-ts.
385
386config TOUCHSCREEN_TOUCHRIGHT
387 tristate "Touchright serial touchscreen"
388 select SERIO
389 help
390 Say Y here if you have a Touchright serial touchscreen connected to
391 your system.
392
393 If unsure, say N.
394
395 To compile this driver as a module, choose M here: the
396 module will be called touchright.
397
398config TOUCHSCREEN_TOUCHWIN
399 tristate "Touchwin serial touchscreen"
400 select SERIO
401 help
402 Say Y here if you have a Touchwin serial touchscreen connected to
403 your system.
404
405 If unsure, say N.
406
407 To compile this driver as a module, choose M here: the
408 module will be called touchwin.
409
410config TOUCHSCREEN_ATMEL_TSADCC
411 tristate "Atmel Touchscreen Interface"
412 depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
413 help
414 Say Y here if you have a 4-wire touchscreen connected to the
415 ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
416
417 If unsure, say N.
418
419 To compile this driver as a module, choose M here: the
420 module will be called atmel_tsadcc.
421
422config TOUCHSCREEN_UCB1400
423 tristate "Philips UCB1400 touchscreen"
424 depends on AC97_BUS
425 depends on UCB1400_CORE
426 help
427 This enables support for the Philips UCB1400 touchscreen interface.
428 The UCB1400 is an AC97 audio codec. The touchscreen interface
429 will be initialized only after the ALSA subsystem has been
430 brought up and the UCB1400 detected. You therefore have to
431 configure ALSA support as well (either built-in or modular,
432 independently of whether this driver is itself built-in or
433 modular) for this driver to work.
434
435 To compile this driver as a module, choose M here: the
436 module will be called ucb1400_ts.
437
438config TOUCHSCREEN_WM831X
439 tristate "Support for WM831x touchscreen controllers"
440 depends on MFD_WM831X
441 help
442 This enables support for the touchscreen controller on the WM831x
443 series of PMICs.
444
445 To compile this driver as a module, choose M here: the
446 module will be called wm831x-ts.
447
448config TOUCHSCREEN_WM97XX
449 tristate "Support for WM97xx AC97 touchscreen controllers"
450 depends on AC97_BUS
451 help
452 Say Y here if you have a Wolfson Microelectronics WM97xx
453 touchscreen connected to your system. Note that this option
454 only enables core driver, you will also need to select
455 support for appropriate chip below.
456
457 If unsure, say N.
458
459 To compile this driver as a module, choose M here: the
460 module will be called wm97xx-ts.
461
462config TOUCHSCREEN_WM9705
463 bool "WM9705 Touchscreen interface support"
464 depends on TOUCHSCREEN_WM97XX
465 default y
466 help
467 Say Y here to enable support for the Wolfson Microelectronics
468 WM9705 touchscreen controller.
469
470config TOUCHSCREEN_WM9712
471 bool "WM9712 Touchscreen interface support"
472 depends on TOUCHSCREEN_WM97XX
473 default y
474 help
475 Say Y here to enable support for the Wolfson Microelectronics
476 WM9712 touchscreen controller.
477
478config TOUCHSCREEN_WM9713
479 bool "WM9713 Touchscreen interface support"
480 depends on TOUCHSCREEN_WM97XX
481 default y
482 help
483 Say Y here to enable support for the Wolfson Microelectronics
484 WM9713 touchscreen controller.
485
486config TOUCHSCREEN_WM97XX_ATMEL
487 tristate "WM97xx Atmel accelerated touch"
488 depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
489 help
490 Say Y here for support for streaming mode with WM97xx touchscreens
491 on Atmel AT91 or AVR32 systems with an AC97C module.
492
493 Be aware that this will use channel B in the controller for
494 streaming data, this must not conflict with other AC97C drivers.
495
496 If unsure, say N.
497
498 To compile this driver as a module, choose M here: the module will
499 be called atmel-wm97xx.
500
501config TOUCHSCREEN_WM97XX_MAINSTONE
502 tristate "WM97xx Mainstone/Palm accelerated touch"
503 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
504 help
505 Say Y here for support for streaming mode with WM97xx touchscreens
506 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
507
508 If unsure, say N.
509
510 To compile this driver as a module, choose M here: the
511 module will be called mainstone-wm97xx.
512
513config TOUCHSCREEN_WM97XX_ZYLONITE
514 tristate "Zylonite accelerated touch"
515 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
516 select TOUCHSCREEN_WM9713
517 help
518 Say Y here for support for streaming mode with the touchscreen
519 on Zylonite systems.
520
521 If unsure, say N.
522
523 To compile this driver as a module, choose M here: the
524 module will be called zylonite-wm97xx.
525
526config TOUCHSCREEN_USB_COMPOSITE
527 tristate "USB Touchscreen Driver"
528 depends on USB_ARCH_HAS_HCD
529 select USB
530 help
531 USB Touchscreen driver for:
532 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
533 - PanJit TouchSet USB
534 - 3M MicroTouch USB (EX II series)
535 - ITM
536 - some other eTurboTouch
537 - Gunze AHL61
538 - DMC TSC-10/25
539 - IRTOUCHSYSTEMS/UNITOP
540 - IdealTEK URTC1000
541 - GoTop Super_Q2/GogoPen/PenPower tablets
542 - JASTEC USB Touch Controller/DigiTech DTR-02U
543 - Zytronic controllers
544
545 Have a look at <http://linux.chapter7.ch/touchkit/> for
546 a usage description and the required user-space stuff.
547
548 To compile this driver as a module, choose M here: the
549 module will be called usbtouchscreen.
550
551config TOUCHSCREEN_MC13783
552 tristate "Freescale MC13783 touchscreen input driver"
553 depends on MFD_MC13783
554 help
555 Say Y here if you have an Freescale MC13783 PMIC on your
556 board and want to use its touchscreen
557
558 If unsure, say N.
559
560 To compile this driver as a module, choose M here: the
561 module will be called mc13783_ts.
562
563config TOUCHSCREEN_USB_EGALAX
564 default y
565 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
566 depends on TOUCHSCREEN_USB_COMPOSITE
567
568config TOUCHSCREEN_USB_PANJIT
569 default y
570 bool "PanJit device support" if EXPERT
571 depends on TOUCHSCREEN_USB_COMPOSITE
572
573config TOUCHSCREEN_USB_3M
574 default y
575 bool "3M/Microtouch EX II series device support" if EXPERT
576 depends on TOUCHSCREEN_USB_COMPOSITE
577
578config TOUCHSCREEN_USB_ITM
579 default y
580 bool "ITM device support" if EXPERT
581 depends on TOUCHSCREEN_USB_COMPOSITE
582
583config TOUCHSCREEN_USB_ETURBO
584 default y
585 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
586 depends on TOUCHSCREEN_USB_COMPOSITE
587
588config TOUCHSCREEN_USB_GUNZE
589 default y
590 bool "Gunze AHL61 device support" if EXPERT
591 depends on TOUCHSCREEN_USB_COMPOSITE
592
593config TOUCHSCREEN_USB_DMC_TSC10
594 default y
595 bool "DMC TSC-10/25 device support" if EXPERT
596 depends on TOUCHSCREEN_USB_COMPOSITE
597
598config TOUCHSCREEN_USB_IRTOUCH
599 default y
600 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
601 depends on TOUCHSCREEN_USB_COMPOSITE
602
603config TOUCHSCREEN_USB_IDEALTEK
604 default y
605 bool "IdealTEK URTC1000 device support" if EXPERT
606 depends on TOUCHSCREEN_USB_COMPOSITE
607
608config TOUCHSCREEN_USB_GENERAL_TOUCH
609 default y
610 bool "GeneralTouch Touchscreen device support" if EXPERT
611 depends on TOUCHSCREEN_USB_COMPOSITE
612
613config TOUCHSCREEN_USB_GOTOP
614 default y
615 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
616 depends on TOUCHSCREEN_USB_COMPOSITE
617
618config TOUCHSCREEN_USB_JASTEC
619 default y
620 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
621 depends on TOUCHSCREEN_USB_COMPOSITE
622
623config TOUCHSCREEN_USB_E2I
624 default y
625 bool "e2i Touchscreen controller (e.g. from Mimo 740)"
626 depends on TOUCHSCREEN_USB_COMPOSITE
627
628config TOUCHSCREEN_USB_ZYTRONIC
629 default y
630 bool "Zytronic controller" if EXPERT
631 depends on TOUCHSCREEN_USB_COMPOSITE
632
633config TOUCHSCREEN_USB_ETT_TC45USB
634 default y
635 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
636 depends on TOUCHSCREEN_USB_COMPOSITE
637
638config TOUCHSCREEN_USB_NEXIO
639 default y
640 bool "NEXIO/iNexio device support" if EXPERT
641 depends on TOUCHSCREEN_USB_COMPOSITE
642
643config TOUCHSCREEN_TOUCHIT213
644 tristate "Sahara TouchIT-213 touchscreen"
645 select SERIO
646 help
647 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
648
649 If unsure, say N.
650
651 To compile this driver as a module, choose M here: the
652 module will be called touchit213.
653
654config TOUCHSCREEN_TSC2005
655 tristate "TSC2005 based touchscreens"
656 depends on SPI_MASTER && GENERIC_HARDIRQS
657 help
658 Say Y here if you have a TSC2005 based touchscreen.
659
660 If unsure, say N.
661
662 To compile this driver as a module, choose M here: the
663 module will be called tsc2005.
664
665config TOUCHSCREEN_TSC2007
666 tristate "TSC2007 based touchscreens"
667 depends on I2C
668 help
669 Say Y here if you have a TSC2007 based touchscreen.
670
671 If unsure, say N.
672
673 To compile this driver as a module, choose M here: the
674 module will be called tsc2007.
675
676config TOUCHSCREEN_W90X900
677 tristate "W90P910 touchscreen driver"
678 depends on HAVE_CLK
679 help
680 Say Y here if you have a W90P910 based touchscreen.
681
682 To compile this driver as a module, choose M here: the
683 module will be called w90p910_ts.
684
685config TOUCHSCREEN_PCAP
686 tristate "Motorola PCAP touchscreen"
687 depends on EZX_PCAP
688 help
689 Say Y here if you have a Motorola EZX telephone and
690 want to enable support for the built-in touchscreen.
691
692 To compile this driver as a module, choose M here: the
693 module will be called pcap_ts.
694
695config TOUCHSCREEN_ST1232
696 tristate "Sitronix ST1232 touchscreen controllers"
697 depends on I2C
698 help
699 Say Y here if you want to support Sitronix ST1232
700 touchscreen controller.
701
702 If unsure, say N.
703
704 To compile this driver as a module, choose M here: the
705 module will be called st1232_ts.
706
707config TOUCHSCREEN_STMPE
708 tristate "STMicroelectronics STMPE touchscreens"
709 depends on MFD_STMPE
710 help
711 Say Y here if you want support for STMicroelectronics
712 STMPE touchscreen controllers.
713
714 To compile this driver as a module, choose M here: the
715 module will be called stmpe-ts.
716
717config TOUCHSCREEN_TPS6507X
718 tristate "TPS6507x based touchscreens"
719 depends on I2C
720 help
721 Say Y here if you have a TPS6507x based touchscreen
722 controller.
723
724 If unsure, say N.
725
726 To compile this driver as a module, choose M here: the
727 module will be called tps6507x_ts.
728
729endif