Linux Audio

Check our new training course

Loading...
Note: File does not exist in v6.2.
   1/*
   2 *  PowerPC version
   3 *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
   4 *
   5 *  Derived from "arch/m68k/kernel/ptrace.c"
   6 *  Copyright (C) 1994 by Hamish Macdonald
   7 *  Taken from linux/kernel/ptrace.c and modified for M680x0.
   8 *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
   9 *
  10 * Modified by Cort Dougan (cort@hq.fsmlabs.com)
  11 * and Paul Mackerras (paulus@samba.org).
  12 *
  13 * This file is subject to the terms and conditions of the GNU General
  14 * Public License.  See the file README.legal in the main directory of
  15 * this archive for more details.
  16 */
  17
  18#include <linux/kernel.h>
  19#include <linux/sched.h>
  20#include <linux/mm.h>
  21#include <linux/smp.h>
  22#include <linux/errno.h>
  23#include <linux/ptrace.h>
  24#include <linux/regset.h>
  25#include <linux/tracehook.h>
  26#include <linux/elf.h>
  27#include <linux/user.h>
  28#include <linux/security.h>
  29#include <linux/signal.h>
  30#include <linux/seccomp.h>
  31#include <linux/audit.h>
  32#include <trace/syscall.h>
  33#ifdef CONFIG_PPC32
  34#include <linux/module.h>
  35#endif
  36#include <linux/hw_breakpoint.h>
  37#include <linux/perf_event.h>
  38
  39#include <asm/uaccess.h>
  40#include <asm/page.h>
  41#include <asm/pgtable.h>
  42#include <asm/system.h>
  43
  44#define CREATE_TRACE_POINTS
  45#include <trace/events/syscalls.h>
  46
  47/*
  48 * The parameter save area on the stack is used to store arguments being passed
  49 * to callee function and is located at fixed offset from stack pointer.
  50 */
  51#ifdef CONFIG_PPC32
  52#define PARAMETER_SAVE_AREA_OFFSET	24  /* bytes */
  53#else /* CONFIG_PPC32 */
  54#define PARAMETER_SAVE_AREA_OFFSET	48  /* bytes */
  55#endif
  56
  57struct pt_regs_offset {
  58	const char *name;
  59	int offset;
  60};
  61
  62#define STR(s)	#s			/* convert to string */
  63#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
  64#define GPR_OFFSET_NAME(num)	\
  65	{.name = STR(gpr##num), .offset = offsetof(struct pt_regs, gpr[num])}
  66#define REG_OFFSET_END {.name = NULL, .offset = 0}
  67
  68static const struct pt_regs_offset regoffset_table[] = {
  69	GPR_OFFSET_NAME(0),
  70	GPR_OFFSET_NAME(1),
  71	GPR_OFFSET_NAME(2),
  72	GPR_OFFSET_NAME(3),
  73	GPR_OFFSET_NAME(4),
  74	GPR_OFFSET_NAME(5),
  75	GPR_OFFSET_NAME(6),
  76	GPR_OFFSET_NAME(7),
  77	GPR_OFFSET_NAME(8),
  78	GPR_OFFSET_NAME(9),
  79	GPR_OFFSET_NAME(10),
  80	GPR_OFFSET_NAME(11),
  81	GPR_OFFSET_NAME(12),
  82	GPR_OFFSET_NAME(13),
  83	GPR_OFFSET_NAME(14),
  84	GPR_OFFSET_NAME(15),
  85	GPR_OFFSET_NAME(16),
  86	GPR_OFFSET_NAME(17),
  87	GPR_OFFSET_NAME(18),
  88	GPR_OFFSET_NAME(19),
  89	GPR_OFFSET_NAME(20),
  90	GPR_OFFSET_NAME(21),
  91	GPR_OFFSET_NAME(22),
  92	GPR_OFFSET_NAME(23),
  93	GPR_OFFSET_NAME(24),
  94	GPR_OFFSET_NAME(25),
  95	GPR_OFFSET_NAME(26),
  96	GPR_OFFSET_NAME(27),
  97	GPR_OFFSET_NAME(28),
  98	GPR_OFFSET_NAME(29),
  99	GPR_OFFSET_NAME(30),
 100	GPR_OFFSET_NAME(31),
 101	REG_OFFSET_NAME(nip),
 102	REG_OFFSET_NAME(msr),
 103	REG_OFFSET_NAME(ctr),
 104	REG_OFFSET_NAME(link),
 105	REG_OFFSET_NAME(xer),
 106	REG_OFFSET_NAME(ccr),
 107#ifdef CONFIG_PPC64
 108	REG_OFFSET_NAME(softe),
 109#else
 110	REG_OFFSET_NAME(mq),
 111#endif
 112	REG_OFFSET_NAME(trap),
 113	REG_OFFSET_NAME(dar),
 114	REG_OFFSET_NAME(dsisr),
 115	REG_OFFSET_END,
 116};
 117
 118/**
 119 * regs_query_register_offset() - query register offset from its name
 120 * @name:	the name of a register
 121 *
 122 * regs_query_register_offset() returns the offset of a register in struct
 123 * pt_regs from its name. If the name is invalid, this returns -EINVAL;
 124 */
 125int regs_query_register_offset(const char *name)
 126{
 127	const struct pt_regs_offset *roff;
 128	for (roff = regoffset_table; roff->name != NULL; roff++)
 129		if (!strcmp(roff->name, name))
 130			return roff->offset;
 131	return -EINVAL;
 132}
 133
 134/**
 135 * regs_query_register_name() - query register name from its offset
 136 * @offset:	the offset of a register in struct pt_regs.
 137 *
 138 * regs_query_register_name() returns the name of a register from its
 139 * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
 140 */
 141const char *regs_query_register_name(unsigned int offset)
 142{
 143	const struct pt_regs_offset *roff;
 144	for (roff = regoffset_table; roff->name != NULL; roff++)
 145		if (roff->offset == offset)
 146			return roff->name;
 147	return NULL;
 148}
 149
 150/*
 151 * does not yet catch signals sent when the child dies.
 152 * in exit.c or in signal.c.
 153 */
 154
 155/*
 156 * Set of msr bits that gdb can change on behalf of a process.
 157 */
 158#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 159#define MSR_DEBUGCHANGE	0
 160#else
 161#define MSR_DEBUGCHANGE	(MSR_SE | MSR_BE)
 162#endif
 163
 164/*
 165 * Max register writeable via put_reg
 166 */
 167#ifdef CONFIG_PPC32
 168#define PT_MAX_PUT_REG	PT_MQ
 169#else
 170#define PT_MAX_PUT_REG	PT_CCR
 171#endif
 172
 173static unsigned long get_user_msr(struct task_struct *task)
 174{
 175	return task->thread.regs->msr | task->thread.fpexc_mode;
 176}
 177
 178static int set_user_msr(struct task_struct *task, unsigned long msr)
 179{
 180	task->thread.regs->msr &= ~MSR_DEBUGCHANGE;
 181	task->thread.regs->msr |= msr & MSR_DEBUGCHANGE;
 182	return 0;
 183}
 184
 185/*
 186 * We prevent mucking around with the reserved area of trap
 187 * which are used internally by the kernel.
 188 */
 189static int set_user_trap(struct task_struct *task, unsigned long trap)
 190{
 191	task->thread.regs->trap = trap & 0xfff0;
 192	return 0;
 193}
 194
 195/*
 196 * Get contents of register REGNO in task TASK.
 197 */
 198unsigned long ptrace_get_reg(struct task_struct *task, int regno)
 199{
 200	if (task->thread.regs == NULL)
 201		return -EIO;
 202
 203	if (regno == PT_MSR)
 204		return get_user_msr(task);
 205
 206	if (regno < (sizeof(struct pt_regs) / sizeof(unsigned long)))
 207		return ((unsigned long *)task->thread.regs)[regno];
 208
 209	return -EIO;
 210}
 211
 212/*
 213 * Write contents of register REGNO in task TASK.
 214 */
 215int ptrace_put_reg(struct task_struct *task, int regno, unsigned long data)
 216{
 217	if (task->thread.regs == NULL)
 218		return -EIO;
 219
 220	if (regno == PT_MSR)
 221		return set_user_msr(task, data);
 222	if (regno == PT_TRAP)
 223		return set_user_trap(task, data);
 224
 225	if (regno <= PT_MAX_PUT_REG) {
 226		((unsigned long *)task->thread.regs)[regno] = data;
 227		return 0;
 228	}
 229	return -EIO;
 230}
 231
 232static int gpr_get(struct task_struct *target, const struct user_regset *regset,
 233		   unsigned int pos, unsigned int count,
 234		   void *kbuf, void __user *ubuf)
 235{
 236	int i, ret;
 237
 238	if (target->thread.regs == NULL)
 239		return -EIO;
 240
 241	if (!FULL_REGS(target->thread.regs)) {
 242		/* We have a partial register set.  Fill 14-31 with bogus values */
 243		for (i = 14; i < 32; i++)
 244			target->thread.regs->gpr[i] = NV_REG_POISON;
 245	}
 246
 247	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 248				  target->thread.regs,
 249				  0, offsetof(struct pt_regs, msr));
 250	if (!ret) {
 251		unsigned long msr = get_user_msr(target);
 252		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &msr,
 253					  offsetof(struct pt_regs, msr),
 254					  offsetof(struct pt_regs, msr) +
 255					  sizeof(msr));
 256	}
 257
 258	BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
 259		     offsetof(struct pt_regs, msr) + sizeof(long));
 260
 261	if (!ret)
 262		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 263					  &target->thread.regs->orig_gpr3,
 264					  offsetof(struct pt_regs, orig_gpr3),
 265					  sizeof(struct pt_regs));
 266	if (!ret)
 267		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
 268					       sizeof(struct pt_regs), -1);
 269
 270	return ret;
 271}
 272
 273static int gpr_set(struct task_struct *target, const struct user_regset *regset,
 274		   unsigned int pos, unsigned int count,
 275		   const void *kbuf, const void __user *ubuf)
 276{
 277	unsigned long reg;
 278	int ret;
 279
 280	if (target->thread.regs == NULL)
 281		return -EIO;
 282
 283	CHECK_FULL_REGS(target->thread.regs);
 284
 285	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 286				 target->thread.regs,
 287				 0, PT_MSR * sizeof(reg));
 288
 289	if (!ret && count > 0) {
 290		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &reg,
 291					 PT_MSR * sizeof(reg),
 292					 (PT_MSR + 1) * sizeof(reg));
 293		if (!ret)
 294			ret = set_user_msr(target, reg);
 295	}
 296
 297	BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
 298		     offsetof(struct pt_regs, msr) + sizeof(long));
 299
 300	if (!ret)
 301		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 302					 &target->thread.regs->orig_gpr3,
 303					 PT_ORIG_R3 * sizeof(reg),
 304					 (PT_MAX_PUT_REG + 1) * sizeof(reg));
 305
 306	if (PT_MAX_PUT_REG + 1 < PT_TRAP && !ret)
 307		ret = user_regset_copyin_ignore(
 308			&pos, &count, &kbuf, &ubuf,
 309			(PT_MAX_PUT_REG + 1) * sizeof(reg),
 310			PT_TRAP * sizeof(reg));
 311
 312	if (!ret && count > 0) {
 313		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &reg,
 314					 PT_TRAP * sizeof(reg),
 315					 (PT_TRAP + 1) * sizeof(reg));
 316		if (!ret)
 317			ret = set_user_trap(target, reg);
 318	}
 319
 320	if (!ret)
 321		ret = user_regset_copyin_ignore(
 322			&pos, &count, &kbuf, &ubuf,
 323			(PT_TRAP + 1) * sizeof(reg), -1);
 324
 325	return ret;
 326}
 327
 328static int fpr_get(struct task_struct *target, const struct user_regset *regset,
 329		   unsigned int pos, unsigned int count,
 330		   void *kbuf, void __user *ubuf)
 331{
 332#ifdef CONFIG_VSX
 333	double buf[33];
 334	int i;
 335#endif
 336	flush_fp_to_thread(target);
 337
 338#ifdef CONFIG_VSX
 339	/* copy to local buffer then write that out */
 340	for (i = 0; i < 32 ; i++)
 341		buf[i] = target->thread.TS_FPR(i);
 342	memcpy(&buf[32], &target->thread.fpscr, sizeof(double));
 343	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
 344
 345#else
 346	BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) !=
 347		     offsetof(struct thread_struct, TS_FPR(32)));
 348
 349	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 350				   &target->thread.fpr, 0, -1);
 351#endif
 352}
 353
 354static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 355		   unsigned int pos, unsigned int count,
 356		   const void *kbuf, const void __user *ubuf)
 357{
 358#ifdef CONFIG_VSX
 359	double buf[33];
 360	int i;
 361#endif
 362	flush_fp_to_thread(target);
 363
 364#ifdef CONFIG_VSX
 365	/* copy to local buffer then write that out */
 366	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
 367	if (i)
 368		return i;
 369	for (i = 0; i < 32 ; i++)
 370		target->thread.TS_FPR(i) = buf[i];
 371	memcpy(&target->thread.fpscr, &buf[32], sizeof(double));
 372	return 0;
 373#else
 374	BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) !=
 375		     offsetof(struct thread_struct, TS_FPR(32)));
 376
 377	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 378				  &target->thread.fpr, 0, -1);
 379#endif
 380}
 381
 382#ifdef CONFIG_ALTIVEC
 383/*
 384 * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
 385 * The transfer totals 34 quadword.  Quadwords 0-31 contain the
 386 * corresponding vector registers.  Quadword 32 contains the vscr as the
 387 * last word (offset 12) within that quadword.  Quadword 33 contains the
 388 * vrsave as the first word (offset 0) within the quadword.
 389 *
 390 * This definition of the VMX state is compatible with the current PPC32
 391 * ptrace interface.  This allows signal handling and ptrace to use the
 392 * same structures.  This also simplifies the implementation of a bi-arch
 393 * (combined (32- and 64-bit) gdb.
 394 */
 395
 396static int vr_active(struct task_struct *target,
 397		     const struct user_regset *regset)
 398{
 399	flush_altivec_to_thread(target);
 400	return target->thread.used_vr ? regset->n : 0;
 401}
 402
 403static int vr_get(struct task_struct *target, const struct user_regset *regset,
 404		  unsigned int pos, unsigned int count,
 405		  void *kbuf, void __user *ubuf)
 406{
 407	int ret;
 408
 409	flush_altivec_to_thread(target);
 410
 411	BUILD_BUG_ON(offsetof(struct thread_struct, vscr) !=
 412		     offsetof(struct thread_struct, vr[32]));
 413
 414	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 415				  &target->thread.vr, 0,
 416				  33 * sizeof(vector128));
 417	if (!ret) {
 418		/*
 419		 * Copy out only the low-order word of vrsave.
 420		 */
 421		union {
 422			elf_vrreg_t reg;
 423			u32 word;
 424		} vrsave;
 425		memset(&vrsave, 0, sizeof(vrsave));
 426		vrsave.word = target->thread.vrsave;
 427		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
 428					  33 * sizeof(vector128), -1);
 429	}
 430
 431	return ret;
 432}
 433
 434static int vr_set(struct task_struct *target, const struct user_regset *regset,
 435		  unsigned int pos, unsigned int count,
 436		  const void *kbuf, const void __user *ubuf)
 437{
 438	int ret;
 439
 440	flush_altivec_to_thread(target);
 441
 442	BUILD_BUG_ON(offsetof(struct thread_struct, vscr) !=
 443		     offsetof(struct thread_struct, vr[32]));
 444
 445	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 446				 &target->thread.vr, 0, 33 * sizeof(vector128));
 447	if (!ret && count > 0) {
 448		/*
 449		 * We use only the first word of vrsave.
 450		 */
 451		union {
 452			elf_vrreg_t reg;
 453			u32 word;
 454		} vrsave;
 455		memset(&vrsave, 0, sizeof(vrsave));
 456		vrsave.word = target->thread.vrsave;
 457		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
 458					 33 * sizeof(vector128), -1);
 459		if (!ret)
 460			target->thread.vrsave = vrsave.word;
 461	}
 462
 463	return ret;
 464}
 465#endif /* CONFIG_ALTIVEC */
 466
 467#ifdef CONFIG_VSX
 468/*
 469 * Currently to set and and get all the vsx state, you need to call
 470 * the fp and VMX calls as well.  This only get/sets the lower 32
 471 * 128bit VSX registers.
 472 */
 473
 474static int vsr_active(struct task_struct *target,
 475		      const struct user_regset *regset)
 476{
 477	flush_vsx_to_thread(target);
 478	return target->thread.used_vsr ? regset->n : 0;
 479}
 480
 481static int vsr_get(struct task_struct *target, const struct user_regset *regset,
 482		   unsigned int pos, unsigned int count,
 483		   void *kbuf, void __user *ubuf)
 484{
 485	double buf[32];
 486	int ret, i;
 487
 488	flush_vsx_to_thread(target);
 489
 490	for (i = 0; i < 32 ; i++)
 491		buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET];
 492	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 493				  buf, 0, 32 * sizeof(double));
 494
 495	return ret;
 496}
 497
 498static int vsr_set(struct task_struct *target, const struct user_regset *regset,
 499		   unsigned int pos, unsigned int count,
 500		   const void *kbuf, const void __user *ubuf)
 501{
 502	double buf[32];
 503	int ret,i;
 504
 505	flush_vsx_to_thread(target);
 506
 507	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 508				 buf, 0, 32 * sizeof(double));
 509	for (i = 0; i < 32 ; i++)
 510		target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 511
 512
 513	return ret;
 514}
 515#endif /* CONFIG_VSX */
 516
 517#ifdef CONFIG_SPE
 518
 519/*
 520 * For get_evrregs/set_evrregs functions 'data' has the following layout:
 521 *
 522 * struct {
 523 *   u32 evr[32];
 524 *   u64 acc;
 525 *   u32 spefscr;
 526 * }
 527 */
 528
 529static int evr_active(struct task_struct *target,
 530		      const struct user_regset *regset)
 531{
 532	flush_spe_to_thread(target);
 533	return target->thread.used_spe ? regset->n : 0;
 534}
 535
 536static int evr_get(struct task_struct *target, const struct user_regset *regset,
 537		   unsigned int pos, unsigned int count,
 538		   void *kbuf, void __user *ubuf)
 539{
 540	int ret;
 541
 542	flush_spe_to_thread(target);
 543
 544	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 545				  &target->thread.evr,
 546				  0, sizeof(target->thread.evr));
 547
 548	BUILD_BUG_ON(offsetof(struct thread_struct, acc) + sizeof(u64) !=
 549		     offsetof(struct thread_struct, spefscr));
 550
 551	if (!ret)
 552		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 553					  &target->thread.acc,
 554					  sizeof(target->thread.evr), -1);
 555
 556	return ret;
 557}
 558
 559static int evr_set(struct task_struct *target, const struct user_regset *regset,
 560		   unsigned int pos, unsigned int count,
 561		   const void *kbuf, const void __user *ubuf)
 562{
 563	int ret;
 564
 565	flush_spe_to_thread(target);
 566
 567	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 568				 &target->thread.evr,
 569				 0, sizeof(target->thread.evr));
 570
 571	BUILD_BUG_ON(offsetof(struct thread_struct, acc) + sizeof(u64) !=
 572		     offsetof(struct thread_struct, spefscr));
 573
 574	if (!ret)
 575		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 576					 &target->thread.acc,
 577					 sizeof(target->thread.evr), -1);
 578
 579	return ret;
 580}
 581#endif /* CONFIG_SPE */
 582
 583
 584/*
 585 * These are our native regset flavors.
 586 */
 587enum powerpc_regset {
 588	REGSET_GPR,
 589	REGSET_FPR,
 590#ifdef CONFIG_ALTIVEC
 591	REGSET_VMX,
 592#endif
 593#ifdef CONFIG_VSX
 594	REGSET_VSX,
 595#endif
 596#ifdef CONFIG_SPE
 597	REGSET_SPE,
 598#endif
 599};
 600
 601static const struct user_regset native_regsets[] = {
 602	[REGSET_GPR] = {
 603		.core_note_type = NT_PRSTATUS, .n = ELF_NGREG,
 604		.size = sizeof(long), .align = sizeof(long),
 605		.get = gpr_get, .set = gpr_set
 606	},
 607	[REGSET_FPR] = {
 608		.core_note_type = NT_PRFPREG, .n = ELF_NFPREG,
 609		.size = sizeof(double), .align = sizeof(double),
 610		.get = fpr_get, .set = fpr_set
 611	},
 612#ifdef CONFIG_ALTIVEC
 613	[REGSET_VMX] = {
 614		.core_note_type = NT_PPC_VMX, .n = 34,
 615		.size = sizeof(vector128), .align = sizeof(vector128),
 616		.active = vr_active, .get = vr_get, .set = vr_set
 617	},
 618#endif
 619#ifdef CONFIG_VSX
 620	[REGSET_VSX] = {
 621		.core_note_type = NT_PPC_VSX, .n = 32,
 622		.size = sizeof(double), .align = sizeof(double),
 623		.active = vsr_active, .get = vsr_get, .set = vsr_set
 624	},
 625#endif
 626#ifdef CONFIG_SPE
 627	[REGSET_SPE] = {
 628		.n = 35,
 629		.size = sizeof(u32), .align = sizeof(u32),
 630		.active = evr_active, .get = evr_get, .set = evr_set
 631	},
 632#endif
 633};
 634
 635static const struct user_regset_view user_ppc_native_view = {
 636	.name = UTS_MACHINE, .e_machine = ELF_ARCH, .ei_osabi = ELF_OSABI,
 637	.regsets = native_regsets, .n = ARRAY_SIZE(native_regsets)
 638};
 639
 640#ifdef CONFIG_PPC64
 641#include <linux/compat.h>
 642
 643static int gpr32_get(struct task_struct *target,
 644		     const struct user_regset *regset,
 645		     unsigned int pos, unsigned int count,
 646		     void *kbuf, void __user *ubuf)
 647{
 648	const unsigned long *regs = &target->thread.regs->gpr[0];
 649	compat_ulong_t *k = kbuf;
 650	compat_ulong_t __user *u = ubuf;
 651	compat_ulong_t reg;
 652	int i;
 653
 654	if (target->thread.regs == NULL)
 655		return -EIO;
 656
 657	if (!FULL_REGS(target->thread.regs)) {
 658		/* We have a partial register set.  Fill 14-31 with bogus values */
 659		for (i = 14; i < 32; i++)
 660			target->thread.regs->gpr[i] = NV_REG_POISON; 
 661	}
 662
 663	pos /= sizeof(reg);
 664	count /= sizeof(reg);
 665
 666	if (kbuf)
 667		for (; count > 0 && pos < PT_MSR; --count)
 668			*k++ = regs[pos++];
 669	else
 670		for (; count > 0 && pos < PT_MSR; --count)
 671			if (__put_user((compat_ulong_t) regs[pos++], u++))
 672				return -EFAULT;
 673
 674	if (count > 0 && pos == PT_MSR) {
 675		reg = get_user_msr(target);
 676		if (kbuf)
 677			*k++ = reg;
 678		else if (__put_user(reg, u++))
 679			return -EFAULT;
 680		++pos;
 681		--count;
 682	}
 683
 684	if (kbuf)
 685		for (; count > 0 && pos < PT_REGS_COUNT; --count)
 686			*k++ = regs[pos++];
 687	else
 688		for (; count > 0 && pos < PT_REGS_COUNT; --count)
 689			if (__put_user((compat_ulong_t) regs[pos++], u++))
 690				return -EFAULT;
 691
 692	kbuf = k;
 693	ubuf = u;
 694	pos *= sizeof(reg);
 695	count *= sizeof(reg);
 696	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
 697					PT_REGS_COUNT * sizeof(reg), -1);
 698}
 699
 700static int gpr32_set(struct task_struct *target,
 701		     const struct user_regset *regset,
 702		     unsigned int pos, unsigned int count,
 703		     const void *kbuf, const void __user *ubuf)
 704{
 705	unsigned long *regs = &target->thread.regs->gpr[0];
 706	const compat_ulong_t *k = kbuf;
 707	const compat_ulong_t __user *u = ubuf;
 708	compat_ulong_t reg;
 709
 710	if (target->thread.regs == NULL)
 711		return -EIO;
 712
 713	CHECK_FULL_REGS(target->thread.regs);
 714
 715	pos /= sizeof(reg);
 716	count /= sizeof(reg);
 717
 718	if (kbuf)
 719		for (; count > 0 && pos < PT_MSR; --count)
 720			regs[pos++] = *k++;
 721	else
 722		for (; count > 0 && pos < PT_MSR; --count) {
 723			if (__get_user(reg, u++))
 724				return -EFAULT;
 725			regs[pos++] = reg;
 726		}
 727
 728
 729	if (count > 0 && pos == PT_MSR) {
 730		if (kbuf)
 731			reg = *k++;
 732		else if (__get_user(reg, u++))
 733			return -EFAULT;
 734		set_user_msr(target, reg);
 735		++pos;
 736		--count;
 737	}
 738
 739	if (kbuf) {
 740		for (; count > 0 && pos <= PT_MAX_PUT_REG; --count)
 741			regs[pos++] = *k++;
 742		for (; count > 0 && pos < PT_TRAP; --count, ++pos)
 743			++k;
 744	} else {
 745		for (; count > 0 && pos <= PT_MAX_PUT_REG; --count) {
 746			if (__get_user(reg, u++))
 747				return -EFAULT;
 748			regs[pos++] = reg;
 749		}
 750		for (; count > 0 && pos < PT_TRAP; --count, ++pos)
 751			if (__get_user(reg, u++))
 752				return -EFAULT;
 753	}
 754
 755	if (count > 0 && pos == PT_TRAP) {
 756		if (kbuf)
 757			reg = *k++;
 758		else if (__get_user(reg, u++))
 759			return -EFAULT;
 760		set_user_trap(target, reg);
 761		++pos;
 762		--count;
 763	}
 764
 765	kbuf = k;
 766	ubuf = u;
 767	pos *= sizeof(reg);
 768	count *= sizeof(reg);
 769	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
 770					 (PT_TRAP + 1) * sizeof(reg), -1);
 771}
 772
 773/*
 774 * These are the regset flavors matching the CONFIG_PPC32 native set.
 775 */
 776static const struct user_regset compat_regsets[] = {
 777	[REGSET_GPR] = {
 778		.core_note_type = NT_PRSTATUS, .n = ELF_NGREG,
 779		.size = sizeof(compat_long_t), .align = sizeof(compat_long_t),
 780		.get = gpr32_get, .set = gpr32_set
 781	},
 782	[REGSET_FPR] = {
 783		.core_note_type = NT_PRFPREG, .n = ELF_NFPREG,
 784		.size = sizeof(double), .align = sizeof(double),
 785		.get = fpr_get, .set = fpr_set
 786	},
 787#ifdef CONFIG_ALTIVEC
 788	[REGSET_VMX] = {
 789		.core_note_type = NT_PPC_VMX, .n = 34,
 790		.size = sizeof(vector128), .align = sizeof(vector128),
 791		.active = vr_active, .get = vr_get, .set = vr_set
 792	},
 793#endif
 794#ifdef CONFIG_SPE
 795	[REGSET_SPE] = {
 796		.core_note_type = NT_PPC_SPE, .n = 35,
 797		.size = sizeof(u32), .align = sizeof(u32),
 798		.active = evr_active, .get = evr_get, .set = evr_set
 799	},
 800#endif
 801};
 802
 803static const struct user_regset_view user_ppc_compat_view = {
 804	.name = "ppc", .e_machine = EM_PPC, .ei_osabi = ELF_OSABI,
 805	.regsets = compat_regsets, .n = ARRAY_SIZE(compat_regsets)
 806};
 807#endif	/* CONFIG_PPC64 */
 808
 809const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 810{
 811#ifdef CONFIG_PPC64
 812	if (test_tsk_thread_flag(task, TIF_32BIT))
 813		return &user_ppc_compat_view;
 814#endif
 815	return &user_ppc_native_view;
 816}
 817
 818
 819void user_enable_single_step(struct task_struct *task)
 820{
 821	struct pt_regs *regs = task->thread.regs;
 822
 823	if (regs != NULL) {
 824#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 825		task->thread.dbcr0 &= ~DBCR0_BT;
 826		task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 827		regs->msr |= MSR_DE;
 828#else
 829		regs->msr &= ~MSR_BE;
 830		regs->msr |= MSR_SE;
 831#endif
 832	}
 833	set_tsk_thread_flag(task, TIF_SINGLESTEP);
 834}
 835
 836void user_enable_block_step(struct task_struct *task)
 837{
 838	struct pt_regs *regs = task->thread.regs;
 839
 840	if (regs != NULL) {
 841#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 842		task->thread.dbcr0 &= ~DBCR0_IC;
 843		task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT;
 844		regs->msr |= MSR_DE;
 845#else
 846		regs->msr &= ~MSR_SE;
 847		regs->msr |= MSR_BE;
 848#endif
 849	}
 850	set_tsk_thread_flag(task, TIF_SINGLESTEP);
 851}
 852
 853void user_disable_single_step(struct task_struct *task)
 854{
 855	struct pt_regs *regs = task->thread.regs;
 856
 857	if (regs != NULL) {
 858#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 859		/*
 860		 * The logic to disable single stepping should be as
 861		 * simple as turning off the Instruction Complete flag.
 862		 * And, after doing so, if all debug flags are off, turn
 863		 * off DBCR0(IDM) and MSR(DE) .... Torez
 864		 */
 865		task->thread.dbcr0 &= ~DBCR0_IC;
 866		/*
 867		 * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
 868		 */
 869		if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0,
 870					task->thread.dbcr1)) {
 871			/*
 872			 * All debug events were off.....
 873			 */
 874			task->thread.dbcr0 &= ~DBCR0_IDM;
 875			regs->msr &= ~MSR_DE;
 876		}
 877#else
 878		regs->msr &= ~(MSR_SE | MSR_BE);
 879#endif
 880	}
 881	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
 882}
 883
 884#ifdef CONFIG_HAVE_HW_BREAKPOINT
 885void ptrace_triggered(struct perf_event *bp,
 886		      struct perf_sample_data *data, struct pt_regs *regs)
 887{
 888	struct perf_event_attr attr;
 889
 890	/*
 891	 * Disable the breakpoint request here since ptrace has defined a
 892	 * one-shot behaviour for breakpoint exceptions in PPC64.
 893	 * The SIGTRAP signal is generated automatically for us in do_dabr().
 894	 * We don't have to do anything about that here
 895	 */
 896	attr = bp->attr;
 897	attr.disabled = true;
 898	modify_user_hw_breakpoint(bp, &attr);
 899}
 900#endif /* CONFIG_HAVE_HW_BREAKPOINT */
 901
 902int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 903			       unsigned long data)
 904{
 905#ifdef CONFIG_HAVE_HW_BREAKPOINT
 906	int ret;
 907	struct thread_struct *thread = &(task->thread);
 908	struct perf_event *bp;
 909	struct perf_event_attr attr;
 910#endif /* CONFIG_HAVE_HW_BREAKPOINT */
 911
 912	/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
 913	 *  For embedded processors we support one DAC and no IAC's at the
 914	 *  moment.
 915	 */
 916	if (addr > 0)
 917		return -EINVAL;
 918
 919	/* The bottom 3 bits in dabr are flags */
 920	if ((data & ~0x7UL) >= TASK_SIZE)
 921		return -EIO;
 922
 923#ifndef CONFIG_PPC_ADV_DEBUG_REGS
 924	/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
 925	 *  It was assumed, on previous implementations, that 3 bits were
 926	 *  passed together with the data address, fitting the design of the
 927	 *  DABR register, as follows:
 928	 *
 929	 *  bit 0: Read flag
 930	 *  bit 1: Write flag
 931	 *  bit 2: Breakpoint translation
 932	 *
 933	 *  Thus, we use them here as so.
 934	 */
 935
 936	/* Ensure breakpoint translation bit is set */
 937	if (data && !(data & DABR_TRANSLATION))
 938		return -EIO;
 939#ifdef CONFIG_HAVE_HW_BREAKPOINT
 940	if (ptrace_get_breakpoints(task) < 0)
 941		return -ESRCH;
 942
 943	bp = thread->ptrace_bps[0];
 944	if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) {
 945		if (bp) {
 946			unregister_hw_breakpoint(bp);
 947			thread->ptrace_bps[0] = NULL;
 948		}
 949		ptrace_put_breakpoints(task);
 950		return 0;
 951	}
 952	if (bp) {
 953		attr = bp->attr;
 954		attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN;
 955		arch_bp_generic_fields(data &
 956					(DABR_DATA_WRITE | DABR_DATA_READ),
 957							&attr.bp_type);
 958		ret =  modify_user_hw_breakpoint(bp, &attr);
 959		if (ret) {
 960			ptrace_put_breakpoints(task);
 961			return ret;
 962		}
 963		thread->ptrace_bps[0] = bp;
 964		ptrace_put_breakpoints(task);
 965		thread->dabr = data;
 966		return 0;
 967	}
 968
 969	/* Create a new breakpoint request if one doesn't exist already */
 970	hw_breakpoint_init(&attr);
 971	attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN;
 972	arch_bp_generic_fields(data & (DABR_DATA_WRITE | DABR_DATA_READ),
 973								&attr.bp_type);
 974
 975	thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
 976					       ptrace_triggered, NULL, task);
 977	if (IS_ERR(bp)) {
 978		thread->ptrace_bps[0] = NULL;
 979		ptrace_put_breakpoints(task);
 980		return PTR_ERR(bp);
 981	}
 982
 983	ptrace_put_breakpoints(task);
 984
 985#endif /* CONFIG_HAVE_HW_BREAKPOINT */
 986
 987	/* Move contents to the DABR register */
 988	task->thread.dabr = data;
 989#else /* CONFIG_PPC_ADV_DEBUG_REGS */
 990	/* As described above, it was assumed 3 bits were passed with the data
 991	 *  address, but we will assume only the mode bits will be passed
 992	 *  as to not cause alignment restrictions for DAC-based processors.
 993	 */
 994
 995	/* DAC's hold the whole address without any mode flags */
 996	task->thread.dac1 = data & ~0x3UL;
 997
 998	if (task->thread.dac1 == 0) {
 999		dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
1000		if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0,
1001					task->thread.dbcr1)) {
1002			task->thread.regs->msr &= ~MSR_DE;
1003			task->thread.dbcr0 &= ~DBCR0_IDM;
1004		}
1005		return 0;
1006	}
1007
1008	/* Read or Write bits must be set */
1009
1010	if (!(data & 0x3UL))
1011		return -EINVAL;
1012
1013	/* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
1014	   register */
1015	task->thread.dbcr0 |= DBCR0_IDM;
1016
1017	/* Check for write and read flags and set DBCR0
1018	   accordingly */
1019	dbcr_dac(task) &= ~(DBCR_DAC1R|DBCR_DAC1W);
1020	if (data & 0x1UL)
1021		dbcr_dac(task) |= DBCR_DAC1R;
1022	if (data & 0x2UL)
1023		dbcr_dac(task) |= DBCR_DAC1W;
1024	task->thread.regs->msr |= MSR_DE;
1025#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
1026	return 0;
1027}
1028
1029/*
1030 * Called by kernel/ptrace.c when detaching..
1031 *
1032 * Make sure single step bits etc are not set.
1033 */
1034void ptrace_disable(struct task_struct *child)
1035{
1036	/* make sure the single step bit is not set. */
1037	user_disable_single_step(child);
1038}
1039
1040#ifdef CONFIG_PPC_ADV_DEBUG_REGS
1041static long set_intruction_bp(struct task_struct *child,
1042			      struct ppc_hw_breakpoint *bp_info)
1043{
1044	int slot;
1045	int slot1_in_use = ((child->thread.dbcr0 & DBCR0_IAC1) != 0);
1046	int slot2_in_use = ((child->thread.dbcr0 & DBCR0_IAC2) != 0);
1047	int slot3_in_use = ((child->thread.dbcr0 & DBCR0_IAC3) != 0);
1048	int slot4_in_use = ((child->thread.dbcr0 & DBCR0_IAC4) != 0);
1049
1050	if (dbcr_iac_range(child) & DBCR_IAC12MODE)
1051		slot2_in_use = 1;
1052	if (dbcr_iac_range(child) & DBCR_IAC34MODE)
1053		slot4_in_use = 1;
1054
1055	if (bp_info->addr >= TASK_SIZE)
1056		return -EIO;
1057
1058	if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
1059
1060		/* Make sure range is valid. */
1061		if (bp_info->addr2 >= TASK_SIZE)
1062			return -EIO;
1063
1064		/* We need a pair of IAC regsisters */
1065		if ((!slot1_in_use) && (!slot2_in_use)) {
1066			slot = 1;
1067			child->thread.iac1 = bp_info->addr;
1068			child->thread.iac2 = bp_info->addr2;
1069			child->thread.dbcr0 |= DBCR0_IAC1;
1070			if (bp_info->addr_mode ==
1071					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
1072				dbcr_iac_range(child) |= DBCR_IAC12X;
1073			else
1074				dbcr_iac_range(child) |= DBCR_IAC12I;
1075#if CONFIG_PPC_ADV_DEBUG_IACS > 2
1076		} else if ((!slot3_in_use) && (!slot4_in_use)) {
1077			slot = 3;
1078			child->thread.iac3 = bp_info->addr;
1079			child->thread.iac4 = bp_info->addr2;
1080			child->thread.dbcr0 |= DBCR0_IAC3;
1081			if (bp_info->addr_mode ==
1082					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
1083				dbcr_iac_range(child) |= DBCR_IAC34X;
1084			else
1085				dbcr_iac_range(child) |= DBCR_IAC34I;
1086#endif
1087		} else
1088			return -ENOSPC;
1089	} else {
1090		/* We only need one.  If possible leave a pair free in
1091		 * case a range is needed later
1092		 */
1093		if (!slot1_in_use) {
1094			/*
1095			 * Don't use iac1 if iac1-iac2 are free and either
1096			 * iac3 or iac4 (but not both) are free
1097			 */
1098			if (slot2_in_use || (slot3_in_use == slot4_in_use)) {
1099				slot = 1;
1100				child->thread.iac1 = bp_info->addr;
1101				child->thread.dbcr0 |= DBCR0_IAC1;
1102				goto out;
1103			}
1104		}
1105		if (!slot2_in_use) {
1106			slot = 2;
1107			child->thread.iac2 = bp_info->addr;
1108			child->thread.dbcr0 |= DBCR0_IAC2;
1109#if CONFIG_PPC_ADV_DEBUG_IACS > 2
1110		} else if (!slot3_in_use) {
1111			slot = 3;
1112			child->thread.iac3 = bp_info->addr;
1113			child->thread.dbcr0 |= DBCR0_IAC3;
1114		} else if (!slot4_in_use) {
1115			slot = 4;
1116			child->thread.iac4 = bp_info->addr;
1117			child->thread.dbcr0 |= DBCR0_IAC4;
1118#endif
1119		} else
1120			return -ENOSPC;
1121	}
1122out:
1123	child->thread.dbcr0 |= DBCR0_IDM;
1124	child->thread.regs->msr |= MSR_DE;
1125
1126	return slot;
1127}
1128
1129static int del_instruction_bp(struct task_struct *child, int slot)
1130{
1131	switch (slot) {
1132	case 1:
1133		if ((child->thread.dbcr0 & DBCR0_IAC1) == 0)
1134			return -ENOENT;
1135
1136		if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
1137			/* address range - clear slots 1 & 2 */
1138			child->thread.iac2 = 0;
1139			dbcr_iac_range(child) &= ~DBCR_IAC12MODE;
1140		}
1141		child->thread.iac1 = 0;
1142		child->thread.dbcr0 &= ~DBCR0_IAC1;
1143		break;
1144	case 2:
1145		if ((child->thread.dbcr0 & DBCR0_IAC2) == 0)
1146			return -ENOENT;
1147
1148		if (dbcr_iac_range(child) & DBCR_IAC12MODE)
1149			/* used in a range */
1150			return -EINVAL;
1151		child->thread.iac2 = 0;
1152		child->thread.dbcr0 &= ~DBCR0_IAC2;
1153		break;
1154#if CONFIG_PPC_ADV_DEBUG_IACS > 2
1155	case 3:
1156		if ((child->thread.dbcr0 & DBCR0_IAC3) == 0)
1157			return -ENOENT;
1158
1159		if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
1160			/* address range - clear slots 3 & 4 */
1161			child->thread.iac4 = 0;
1162			dbcr_iac_range(child) &= ~DBCR_IAC34MODE;
1163		}
1164		child->thread.iac3 = 0;
1165		child->thread.dbcr0 &= ~DBCR0_IAC3;
1166		break;
1167	case 4:
1168		if ((child->thread.dbcr0 & DBCR0_IAC4) == 0)
1169			return -ENOENT;
1170
1171		if (dbcr_iac_range(child) & DBCR_IAC34MODE)
1172			/* Used in a range */
1173			return -EINVAL;
1174		child->thread.iac4 = 0;
1175		child->thread.dbcr0 &= ~DBCR0_IAC4;
1176		break;
1177#endif
1178	default:
1179		return -EINVAL;
1180	}
1181	return 0;
1182}
1183
1184static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
1185{
1186	int byte_enable =
1187		(bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT)
1188		& 0xf;
1189	int condition_mode =
1190		bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE;
1191	int slot;
1192
1193	if (byte_enable && (condition_mode == 0))
1194		return -EINVAL;
1195
1196	if (bp_info->addr >= TASK_SIZE)
1197		return -EIO;
1198
1199	if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) {
1200		slot = 1;
1201		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
1202			dbcr_dac(child) |= DBCR_DAC1R;
1203		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
1204			dbcr_dac(child) |= DBCR_DAC1W;
1205		child->thread.dac1 = (unsigned long)bp_info->addr;
1206#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
1207		if (byte_enable) {
1208			child->thread.dvc1 =
1209				(unsigned long)bp_info->condition_value;
1210			child->thread.dbcr2 |=
1211				((byte_enable << DBCR2_DVC1BE_SHIFT) |
1212				 (condition_mode << DBCR2_DVC1M_SHIFT));
1213		}
1214#endif
1215#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
1216	} else if (child->thread.dbcr2 & DBCR2_DAC12MODE) {
1217		/* Both dac1 and dac2 are part of a range */
1218		return -ENOSPC;
1219#endif
1220	} else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) {
1221		slot = 2;
1222		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
1223			dbcr_dac(child) |= DBCR_DAC2R;
1224		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
1225			dbcr_dac(child) |= DBCR_DAC2W;
1226		child->thread.dac2 = (unsigned long)bp_info->addr;
1227#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
1228		if (byte_enable) {
1229			child->thread.dvc2 =
1230				(unsigned long)bp_info->condition_value;
1231			child->thread.dbcr2 |=
1232				((byte_enable << DBCR2_DVC2BE_SHIFT) |
1233				 (condition_mode << DBCR2_DVC2M_SHIFT));
1234		}
1235#endif
1236	} else
1237		return -ENOSPC;
1238	child->thread.dbcr0 |= DBCR0_IDM;
1239	child->thread.regs->msr |= MSR_DE;
1240
1241	return slot + 4;
1242}
1243
1244static int del_dac(struct task_struct *child, int slot)
1245{
1246	if (slot == 1) {
1247		if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
1248			return -ENOENT;
1249
1250		child->thread.dac1 = 0;
1251		dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W);
1252#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
1253		if (child->thread.dbcr2 & DBCR2_DAC12MODE) {
1254			child->thread.dac2 = 0;
1255			child->thread.dbcr2 &= ~DBCR2_DAC12MODE;
1256		}
1257		child->thread.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
1258#endif
1259#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
1260		child->thread.dvc1 = 0;
1261#endif
1262	} else if (slot == 2) {
1263		if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
1264			return -ENOENT;
1265
1266#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
1267		if (child->thread.dbcr2 & DBCR2_DAC12MODE)
1268			/* Part of a range */
1269			return -EINVAL;
1270		child->thread.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
1271#endif
1272#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
1273		child->thread.dvc2 = 0;
1274#endif
1275		child->thread.dac2 = 0;
1276		dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W);
1277	} else
1278		return -EINVAL;
1279
1280	return 0;
1281}
1282#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
1283
1284#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
1285static int set_dac_range(struct task_struct *child,
1286			 struct ppc_hw_breakpoint *bp_info)
1287{
1288	int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK;
1289
1290	/* We don't allow range watchpoints to be used with DVC */
1291	if (bp_info->condition_mode)
1292		return -EINVAL;
1293
1294	/*
1295	 * Best effort to verify the address range.  The user/supervisor bits
1296	 * prevent trapping in kernel space, but let's fail on an obvious bad
1297	 * range.  The simple test on the mask is not fool-proof, and any
1298	 * exclusive range will spill over into kernel space.
1299	 */
1300	if (bp_info->addr >= TASK_SIZE)
1301		return -EIO;
1302	if (mode == PPC_BREAKPOINT_MODE_MASK) {
1303		/*
1304		 * dac2 is a bitmask.  Don't allow a mask that makes a
1305		 * kernel space address from a valid dac1 value
1306		 */
1307		if (~((unsigned long)bp_info->addr2) >= TASK_SIZE)
1308			return -EIO;
1309	} else {
1310		/*
1311		 * For range breakpoints, addr2 must also be a valid address
1312		 */
1313		if (bp_info->addr2 >= TASK_SIZE)
1314			return -EIO;
1315	}
1316
1317	if (child->thread.dbcr0 &
1318	    (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W))
1319		return -ENOSPC;
1320
1321	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
1322		child->thread.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
1323	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
1324		child->thread.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
1325	child->thread.dac1 = bp_info->addr;
1326	child->thread.dac2 = bp_info->addr2;
1327	if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
1328		child->thread.dbcr2  |= DBCR2_DAC12M;
1329	else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
1330		child->thread.dbcr2  |= DBCR2_DAC12MX;
1331	else	/* PPC_BREAKPOINT_MODE_MASK */
1332		child->thread.dbcr2  |= DBCR2_DAC12MM;
1333	child->thread.regs->msr |= MSR_DE;
1334
1335	return 5;
1336}
1337#endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */
1338
1339static long ppc_set_hwdebug(struct task_struct *child,
1340		     struct ppc_hw_breakpoint *bp_info)
1341{
1342#ifndef CONFIG_PPC_ADV_DEBUG_REGS
1343	unsigned long dabr;
1344#endif
1345
1346	if (bp_info->version != 1)
1347		return -ENOTSUPP;
1348#ifdef CONFIG_PPC_ADV_DEBUG_REGS
1349	/*
1350	 * Check for invalid flags and combinations
1351	 */
1352	if ((bp_info->trigger_type == 0) ||
1353	    (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE |
1354				       PPC_BREAKPOINT_TRIGGER_RW)) ||
1355	    (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) ||
1356	    (bp_info->condition_mode &
1357	     ~(PPC_BREAKPOINT_CONDITION_MODE |
1358	       PPC_BREAKPOINT_CONDITION_BE_ALL)))
1359		return -EINVAL;
1360#if CONFIG_PPC_ADV_DEBUG_DVCS == 0
1361	if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
1362		return -EINVAL;
1363#endif
1364
1365	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) {
1366		if ((bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE) ||
1367		    (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
1368			return -EINVAL;
1369		return set_intruction_bp(child, bp_info);
1370	}
1371	if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
1372		return set_dac(child, bp_info);
1373
1374#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
1375	return set_dac_range(child, bp_info);
1376#else
1377	return -EINVAL;
1378#endif
1379#else /* !CONFIG_PPC_ADV_DEBUG_DVCS */
1380	/*
1381	 * We only support one data breakpoint
1382	 */
1383	if ((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0 ||
1384	    (bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0 ||
1385	    bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT ||
1386	    bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
1387		return -EINVAL;
1388
1389	if (child->thread.dabr)
1390		return -ENOSPC;
1391
1392	if ((unsigned long)bp_info->addr >= TASK_SIZE)
1393		return -EIO;
1394
1395	dabr = (unsigned long)bp_info->addr & ~7UL;
1396	dabr |= DABR_TRANSLATION;
1397	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
1398		dabr |= DABR_DATA_READ;
1399	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
1400		dabr |= DABR_DATA_WRITE;
1401
1402	child->thread.dabr = dabr;
1403
1404	return 1;
1405#endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */
1406}
1407
1408static long ppc_del_hwdebug(struct task_struct *child, long addr, long data)
1409{
1410#ifdef CONFIG_PPC_ADV_DEBUG_REGS
1411	int rc;
1412
1413	if (data <= 4)
1414		rc = del_instruction_bp(child, (int)data);
1415	else
1416		rc = del_dac(child, (int)data - 4);
1417
1418	if (!rc) {
1419		if (!DBCR_ACTIVE_EVENTS(child->thread.dbcr0,
1420					child->thread.dbcr1)) {
1421			child->thread.dbcr0 &= ~DBCR0_IDM;
1422			child->thread.regs->msr &= ~MSR_DE;
1423		}
1424	}
1425	return rc;
1426#else
1427	if (data != 1)
1428		return -EINVAL;
1429	if (child->thread.dabr == 0)
1430		return -ENOENT;
1431
1432	child->thread.dabr = 0;
1433
1434	return 0;
1435#endif
1436}
1437
1438/*
1439 * Here are the old "legacy" powerpc specific getregs/setregs ptrace calls,
1440 * we mark them as obsolete now, they will be removed in a future version
1441 */
1442static long arch_ptrace_old(struct task_struct *child, long request,
1443			    unsigned long addr, unsigned long data)
1444{
1445	void __user *datavp = (void __user *) data;
1446
1447	switch (request) {
1448	case PPC_PTRACE_GETREGS:	/* Get GPRs 0 - 31. */
1449		return copy_regset_to_user(child, &user_ppc_native_view,
1450					   REGSET_GPR, 0, 32 * sizeof(long),
1451					   datavp);
1452
1453	case PPC_PTRACE_SETREGS:	/* Set GPRs 0 - 31. */
1454		return copy_regset_from_user(child, &user_ppc_native_view,
1455					     REGSET_GPR, 0, 32 * sizeof(long),
1456					     datavp);
1457
1458	case PPC_PTRACE_GETFPREGS:	/* Get FPRs 0 - 31. */
1459		return copy_regset_to_user(child, &user_ppc_native_view,
1460					   REGSET_FPR, 0, 32 * sizeof(double),
1461					   datavp);
1462
1463	case PPC_PTRACE_SETFPREGS:	/* Set FPRs 0 - 31. */
1464		return copy_regset_from_user(child, &user_ppc_native_view,
1465					     REGSET_FPR, 0, 32 * sizeof(double),
1466					     datavp);
1467	}
1468
1469	return -EPERM;
1470}
1471
1472long arch_ptrace(struct task_struct *child, long request,
1473		 unsigned long addr, unsigned long data)
1474{
1475	int ret = -EPERM;
1476	void __user *datavp = (void __user *) data;
1477	unsigned long __user *datalp = datavp;
1478
1479	switch (request) {
1480	/* read the word at location addr in the USER area. */
1481	case PTRACE_PEEKUSR: {
1482		unsigned long index, tmp;
1483
1484		ret = -EIO;
1485		/* convert to index and check */
1486#ifdef CONFIG_PPC32
1487		index = addr >> 2;
1488		if ((addr & 3) || (index > PT_FPSCR)
1489		    || (child->thread.regs == NULL))
1490#else
1491		index = addr >> 3;
1492		if ((addr & 7) || (index > PT_FPSCR))
1493#endif
1494			break;
1495
1496		CHECK_FULL_REGS(child->thread.regs);
1497		if (index < PT_FPR0) {
1498			tmp = ptrace_get_reg(child, (int) index);
1499		} else {
1500			flush_fp_to_thread(child);
1501			tmp = ((unsigned long *)child->thread.fpr)
1502				[TS_FPRWIDTH * (index - PT_FPR0)];
1503		}
1504		ret = put_user(tmp, datalp);
1505		break;
1506	}
1507
1508	/* write the word at location addr in the USER area */
1509	case PTRACE_POKEUSR: {
1510		unsigned long index;
1511
1512		ret = -EIO;
1513		/* convert to index and check */
1514#ifdef CONFIG_PPC32
1515		index = addr >> 2;
1516		if ((addr & 3) || (index > PT_FPSCR)
1517		    || (child->thread.regs == NULL))
1518#else
1519		index = addr >> 3;
1520		if ((addr & 7) || (index > PT_FPSCR))
1521#endif
1522			break;
1523
1524		CHECK_FULL_REGS(child->thread.regs);
1525		if (index < PT_FPR0) {
1526			ret = ptrace_put_reg(child, index, data);
1527		} else {
1528			flush_fp_to_thread(child);
1529			((unsigned long *)child->thread.fpr)
1530				[TS_FPRWIDTH * (index - PT_FPR0)] = data;
1531			ret = 0;
1532		}
1533		break;
1534	}
1535
1536	case PPC_PTRACE_GETHWDBGINFO: {
1537		struct ppc_debug_info dbginfo;
1538
1539		dbginfo.version = 1;
1540#ifdef CONFIG_PPC_ADV_DEBUG_REGS
1541		dbginfo.num_instruction_bps = CONFIG_PPC_ADV_DEBUG_IACS;
1542		dbginfo.num_data_bps = CONFIG_PPC_ADV_DEBUG_DACS;
1543		dbginfo.num_condition_regs = CONFIG_PPC_ADV_DEBUG_DVCS;
1544		dbginfo.data_bp_alignment = 4;
1545		dbginfo.sizeof_condition = 4;
1546		dbginfo.features = PPC_DEBUG_FEATURE_INSN_BP_RANGE |
1547				   PPC_DEBUG_FEATURE_INSN_BP_MASK;
1548#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
1549		dbginfo.features |=
1550				   PPC_DEBUG_FEATURE_DATA_BP_RANGE |
1551				   PPC_DEBUG_FEATURE_DATA_BP_MASK;
1552#endif
1553#else /* !CONFIG_PPC_ADV_DEBUG_REGS */
1554		dbginfo.num_instruction_bps = 0;
1555		dbginfo.num_data_bps = 1;
1556		dbginfo.num_condition_regs = 0;
1557#ifdef CONFIG_PPC64
1558		dbginfo.data_bp_alignment = 8;
1559#else
1560		dbginfo.data_bp_alignment = 4;
1561#endif
1562		dbginfo.sizeof_condition = 0;
1563		dbginfo.features = 0;
1564#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
1565
1566		if (!access_ok(VERIFY_WRITE, datavp,
1567			       sizeof(struct ppc_debug_info)))
1568			return -EFAULT;
1569		ret = __copy_to_user(datavp, &dbginfo,
1570				     sizeof(struct ppc_debug_info)) ?
1571		      -EFAULT : 0;
1572		break;
1573	}
1574
1575	case PPC_PTRACE_SETHWDEBUG: {
1576		struct ppc_hw_breakpoint bp_info;
1577
1578		if (!access_ok(VERIFY_READ, datavp,
1579			       sizeof(struct ppc_hw_breakpoint)))
1580			return -EFAULT;
1581		ret = __copy_from_user(&bp_info, datavp,
1582				       sizeof(struct ppc_hw_breakpoint)) ?
1583		      -EFAULT : 0;
1584		if (!ret)
1585			ret = ppc_set_hwdebug(child, &bp_info);
1586		break;
1587	}
1588
1589	case PPC_PTRACE_DELHWDEBUG: {
1590		ret = ppc_del_hwdebug(child, addr, data);
1591		break;
1592	}
1593
1594	case PTRACE_GET_DEBUGREG: {
1595		ret = -EINVAL;
1596		/* We only support one DABR and no IABRS at the moment */
1597		if (addr > 0)
1598			break;
1599#ifdef CONFIG_PPC_ADV_DEBUG_REGS
1600		ret = put_user(child->thread.dac1, datalp);
1601#else
1602		ret = put_user(child->thread.dabr, datalp);
1603#endif
1604		break;
1605	}
1606
1607	case PTRACE_SET_DEBUGREG:
1608		ret = ptrace_set_debugreg(child, addr, data);
1609		break;
1610
1611#ifdef CONFIG_PPC64
1612	case PTRACE_GETREGS64:
1613#endif
1614	case PTRACE_GETREGS:	/* Get all pt_regs from the child. */
1615		return copy_regset_to_user(child, &user_ppc_native_view,
1616					   REGSET_GPR,
1617					   0, sizeof(struct pt_regs),
1618					   datavp);
1619
1620#ifdef CONFIG_PPC64
1621	case PTRACE_SETREGS64:
1622#endif
1623	case PTRACE_SETREGS:	/* Set all gp regs in the child. */
1624		return copy_regset_from_user(child, &user_ppc_native_view,
1625					     REGSET_GPR,
1626					     0, sizeof(struct pt_regs),
1627					     datavp);
1628
1629	case PTRACE_GETFPREGS: /* Get the child FPU state (FPR0...31 + FPSCR) */
1630		return copy_regset_to_user(child, &user_ppc_native_view,
1631					   REGSET_FPR,
1632					   0, sizeof(elf_fpregset_t),
1633					   datavp);
1634
1635	case PTRACE_SETFPREGS: /* Set the child FPU state (FPR0...31 + FPSCR) */
1636		return copy_regset_from_user(child, &user_ppc_native_view,
1637					     REGSET_FPR,
1638					     0, sizeof(elf_fpregset_t),
1639					     datavp);
1640
1641#ifdef CONFIG_ALTIVEC
1642	case PTRACE_GETVRREGS:
1643		return copy_regset_to_user(child, &user_ppc_native_view,
1644					   REGSET_VMX,
1645					   0, (33 * sizeof(vector128) +
1646					       sizeof(u32)),
1647					   datavp);
1648
1649	case PTRACE_SETVRREGS:
1650		return copy_regset_from_user(child, &user_ppc_native_view,
1651					     REGSET_VMX,
1652					     0, (33 * sizeof(vector128) +
1653						 sizeof(u32)),
1654					     datavp);
1655#endif
1656#ifdef CONFIG_VSX
1657	case PTRACE_GETVSRREGS:
1658		return copy_regset_to_user(child, &user_ppc_native_view,
1659					   REGSET_VSX,
1660					   0, 32 * sizeof(double),
1661					   datavp);
1662
1663	case PTRACE_SETVSRREGS:
1664		return copy_regset_from_user(child, &user_ppc_native_view,
1665					     REGSET_VSX,
1666					     0, 32 * sizeof(double),
1667					     datavp);
1668#endif
1669#ifdef CONFIG_SPE
1670	case PTRACE_GETEVRREGS:
1671		/* Get the child spe register state. */
1672		return copy_regset_to_user(child, &user_ppc_native_view,
1673					   REGSET_SPE, 0, 35 * sizeof(u32),
1674					   datavp);
1675
1676	case PTRACE_SETEVRREGS:
1677		/* Set the child spe register state. */
1678		return copy_regset_from_user(child, &user_ppc_native_view,
1679					     REGSET_SPE, 0, 35 * sizeof(u32),
1680					     datavp);
1681#endif
1682
1683	/* Old reverse args ptrace callss */
1684	case PPC_PTRACE_GETREGS: /* Get GPRs 0 - 31. */
1685	case PPC_PTRACE_SETREGS: /* Set GPRs 0 - 31. */
1686	case PPC_PTRACE_GETFPREGS: /* Get FPRs 0 - 31. */
1687	case PPC_PTRACE_SETFPREGS: /* Get FPRs 0 - 31. */
1688		ret = arch_ptrace_old(child, request, addr, data);
1689		break;
1690
1691	default:
1692		ret = ptrace_request(child, request, addr, data);
1693		break;
1694	}
1695	return ret;
1696}
1697
1698/*
1699 * We must return the syscall number to actually look up in the table.
1700 * This can be -1L to skip running any syscall at all.
1701 */
1702long do_syscall_trace_enter(struct pt_regs *regs)
1703{
1704	long ret = 0;
1705
1706	secure_computing(regs->gpr[0]);
1707
1708	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
1709	    tracehook_report_syscall_entry(regs))
1710		/*
1711		 * Tracing decided this syscall should not happen.
1712		 * We'll return a bogus call number to get an ENOSYS
1713		 * error, but leave the original number in regs->gpr[0].
1714		 */
1715		ret = -1L;
1716
1717	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
1718		trace_sys_enter(regs, regs->gpr[0]);
1719
1720	if (unlikely(current->audit_context)) {
1721#ifdef CONFIG_PPC64
1722		if (!is_32bit_task())
1723			audit_syscall_entry(AUDIT_ARCH_PPC64,
1724					    regs->gpr[0],
1725					    regs->gpr[3], regs->gpr[4],
1726					    regs->gpr[5], regs->gpr[6]);
1727		else
1728#endif
1729			audit_syscall_entry(AUDIT_ARCH_PPC,
1730					    regs->gpr[0],
1731					    regs->gpr[3] & 0xffffffff,
1732					    regs->gpr[4] & 0xffffffff,
1733					    regs->gpr[5] & 0xffffffff,
1734					    regs->gpr[6] & 0xffffffff);
1735	}
1736
1737	return ret ?: regs->gpr[0];
1738}
1739
1740void do_syscall_trace_leave(struct pt_regs *regs)
1741{
1742	int step;
1743
1744	if (unlikely(current->audit_context))
1745		audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
1746				   regs->result);
1747
1748	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
1749		trace_sys_exit(regs, regs->result);
1750
1751	step = test_thread_flag(TIF_SINGLESTEP);
1752	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
1753		tracehook_report_syscall_exit(regs, step);
1754}