1// SPDX-License-Identifier: GPL-2.0-only
 2/*
 3 * Copyright 2013 Pavel Machek <pavel@denx.de>
 4 */
 5
 6/dts-v1/;
 7#include "imx6q.dtsi"
 8
 9/ {
10	model = "MicroSys sbc6x board";
11	compatible = "microsys,sbc6x", "fsl,imx6q";
12
13	memory@10000000 {
14		device_type = "memory";
15		reg = <0x10000000 0x80000000>;
16	};
17};
18
19
20&fec {
21	pinctrl-names = "default";
22	pinctrl-0 = <&pinctrl_enet>;
23	phy-mode = "rgmii";
24	status = "okay";
25};
26
27&iomuxc {
28	imx6q-sbc6x {
29		pinctrl_enet: enetgrp {
30			fsl,pins = <
31				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
32				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
33				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
34				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
35				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
36				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
37				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
38				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
39				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
40				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
41				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
42				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
43				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
44				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
45				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
46				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
47			>;
48		};
49
50		pinctrl_uart1: uart1grp {
51			fsl,pins = <
52				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
53				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
54			>;
55		};
56
57		pinctrl_usbotg: usbotggrp {
58			fsl,pins = <
59				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
60			>;
61		};
62
63		pinctrl_usdhc3: usdhc3grp {
64			fsl,pins = <
65				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
66				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
67				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
68				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
69				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
70				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
71			>;
72		};
73	};
74};
75
76&uart1 {
77	pinctrl-names = "default";
78	pinctrl-0 = <&pinctrl_uart1>;
79	status = "okay";
80};
81
82&usbotg {
83	pinctrl-names = "default";
84	pinctrl-0 = <&pinctrl_usbotg>;
85	disable-over-current;
86	status = "okay";
87};
88
89&usdhc3 {
90	pinctrl-names = "default";
91	pinctrl-0 = <&pinctrl_usdhc3>;
92	status = "okay";
93};