Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6/dts-v1/;
7#include <dt-bindings/gpio/gpio.h>
8#include "imx6q.dtsi"
9
10/ {
11 model = "Gateworks Ventana GW5400-A";
12 compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
13
14 /* these are used by bootloader for disabling nodes */
15 aliases {
16 i2c0 = &i2c1;
17 i2c1 = &i2c2;
18 i2c2 = &i2c3;
19 led0 = &led0;
20 led1 = &led1;
21 led2 = &led2;
22 ssi0 = &ssi1;
23 spi0 = &ecspi1;
24 usb0 = &usbh1;
25 usb1 = &usbotg;
26 };
27
28 chosen {
29 bootargs = "console=ttymxc1,115200";
30 };
31
32 leds {
33 compatible = "gpio-leds";
34 pinctrl-names = "default";
35 pinctrl-0 = <&pinctrl_gpio_leds>;
36
37 led0: user1 {
38 label = "user1";
39 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
40 default-state = "on";
41 linux,default-trigger = "heartbeat";
42 };
43
44 led1: user2 {
45 label = "user2";
46 gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
47 default-state = "off";
48 };
49
50 led2: user3 {
51 label = "user3";
52 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
53 default-state = "off";
54 };
55 };
56
57 memory@10000000 {
58 device_type = "memory";
59 reg = <0x10000000 0x40000000>;
60 };
61
62 pps {
63 compatible = "pps-gpio";
64 pinctrl-names = "default";
65 pinctrl-0 = <&pinctrl_gpio_leds>;
66 gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
67 status = "okay";
68 };
69
70 regulators {
71 compatible = "simple-bus";
72 #address-cells = <1>;
73 #size-cells = <0>;
74
75 reg_1p0v: regulator@0 {
76 compatible = "regulator-fixed";
77 reg = <0>;
78 regulator-name = "1P0V";
79 regulator-min-microvolt = <1000000>;
80 regulator-max-microvolt = <1000000>;
81 regulator-always-on;
82 };
83
84 reg_3p3v: regulator@1 {
85 compatible = "regulator-fixed";
86 reg = <1>;
87 regulator-name = "3P3V";
88 regulator-min-microvolt = <3300000>;
89 regulator-max-microvolt = <3300000>;
90 regulator-always-on;
91 };
92
93 reg_usb_h1_vbus: regulator@2 {
94 compatible = "regulator-fixed";
95 reg = <2>;
96 regulator-name = "usb_h1_vbus";
97 regulator-min-microvolt = <5000000>;
98 regulator-max-microvolt = <5000000>;
99 regulator-always-on;
100 };
101
102 reg_usb_otg_vbus: regulator@3 {
103 compatible = "regulator-fixed";
104 reg = <3>;
105 regulator-name = "usb_otg_vbus";
106 regulator-min-microvolt = <5000000>;
107 regulator-max-microvolt = <5000000>;
108 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
109 enable-active-high;
110 };
111 };
112
113 sound {
114 compatible = "fsl,imx6q-ventana-sgtl5000",
115 "fsl,imx-audio-sgtl5000";
116 model = "sgtl5000-audio";
117 ssi-controller = <&ssi1>;
118 audio-codec = <&codec>;
119 audio-routing =
120 "MIC_IN", "Mic Jack",
121 "Mic Jack", "Mic Bias",
122 "Headphone Jack", "HP_OUT";
123 mux-int-port = <1>;
124 mux-ext-port = <4>;
125 };
126};
127
128&audmux {
129 pinctrl-names = "default";
130 pinctrl-0 = <&pinctrl_audmux>;
131 status = "okay";
132};
133
134&ecspi1 {
135 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
136 pinctrl-names = "default";
137 pinctrl-0 = <&pinctrl_ecspi1>;
138 status = "okay";
139
140 flash: flash@0 {
141 compatible = "sst,w25q256", "jedec,spi-nor";
142 spi-max-frequency = <30000000>;
143 reg = <0>;
144 };
145};
146
147&fec {
148 pinctrl-names = "default";
149 pinctrl-0 = <&pinctrl_enet>;
150 phy-mode = "rgmii-id";
151 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
152 status = "okay";
153};
154
155&hdmi {
156 ddc-i2c-bus = <&i2c3>;
157 status = "okay";
158};
159
160&i2c1 {
161 clock-frequency = <100000>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&pinctrl_i2c1>;
164 status = "okay";
165
166 eeprom1: eeprom@50 {
167 compatible = "atmel,24c02";
168 reg = <0x50>;
169 pagesize = <16>;
170 };
171
172 eeprom2: eeprom@51 {
173 compatible = "atmel,24c02";
174 reg = <0x51>;
175 pagesize = <16>;
176 };
177
178 eeprom3: eeprom@52 {
179 compatible = "atmel,24c02";
180 reg = <0x52>;
181 pagesize = <16>;
182 };
183
184 eeprom4: eeprom@53 {
185 compatible = "atmel,24c02";
186 reg = <0x53>;
187 pagesize = <16>;
188 };
189
190 gpio: pca9555@23 {
191 compatible = "nxp,pca9555";
192 reg = <0x23>;
193 gpio-controller;
194 #gpio-cells = <2>;
195 };
196
197 rtc: ds1672@68 {
198 compatible = "dallas,ds1672";
199 reg = <0x68>;
200 };
201};
202
203&i2c2 {
204 clock-frequency = <100000>;
205 pinctrl-names = "default";
206 pinctrl-0 = <&pinctrl_i2c2>;
207 status = "okay";
208
209 pmic: pfuze100@8 {
210 compatible = "fsl,pfuze100";
211 reg = <0x08>;
212
213 regulators {
214 sw1a_reg: sw1ab {
215 regulator-min-microvolt = <300000>;
216 regulator-max-microvolt = <1875000>;
217 regulator-boot-on;
218 regulator-always-on;
219 regulator-ramp-delay = <6250>;
220 };
221
222 sw1c_reg: sw1c {
223 regulator-min-microvolt = <300000>;
224 regulator-max-microvolt = <1875000>;
225 regulator-boot-on;
226 regulator-always-on;
227 regulator-ramp-delay = <6250>;
228 };
229
230 sw2_reg: sw2 {
231 regulator-min-microvolt = <800000>;
232 regulator-max-microvolt = <3950000>;
233 regulator-boot-on;
234 regulator-always-on;
235 };
236
237 sw3a_reg: sw3a {
238 regulator-min-microvolt = <400000>;
239 regulator-max-microvolt = <1975000>;
240 regulator-boot-on;
241 regulator-always-on;
242 };
243
244 sw3b_reg: sw3b {
245 regulator-min-microvolt = <400000>;
246 regulator-max-microvolt = <1975000>;
247 regulator-boot-on;
248 regulator-always-on;
249 };
250
251 sw4_reg: sw4 {
252 regulator-min-microvolt = <800000>;
253 regulator-max-microvolt = <3300000>;
254 };
255
256 swbst_reg: swbst {
257 regulator-min-microvolt = <5000000>;
258 regulator-max-microvolt = <5150000>;
259 };
260
261 snvs_reg: vsnvs {
262 regulator-min-microvolt = <1000000>;
263 regulator-max-microvolt = <3000000>;
264 regulator-boot-on;
265 regulator-always-on;
266 };
267
268 vref_reg: vrefddr {
269 regulator-boot-on;
270 regulator-always-on;
271 };
272
273 vgen1_reg: vgen1 {
274 regulator-min-microvolt = <800000>;
275 regulator-max-microvolt = <1550000>;
276 };
277
278 vgen2_reg: vgen2 {
279 regulator-min-microvolt = <800000>;
280 regulator-max-microvolt = <1550000>;
281 };
282
283 vgen3_reg: vgen3 {
284 regulator-min-microvolt = <1800000>;
285 regulator-max-microvolt = <3300000>;
286 };
287
288 vgen4_reg: vgen4 {
289 regulator-min-microvolt = <1800000>;
290 regulator-max-microvolt = <3300000>;
291 regulator-always-on;
292 };
293
294 vgen5_reg: vgen5 {
295 regulator-min-microvolt = <1800000>;
296 regulator-max-microvolt = <3300000>;
297 regulator-always-on;
298 };
299
300 vgen6_reg: vgen6 {
301 regulator-min-microvolt = <1800000>;
302 regulator-max-microvolt = <3300000>;
303 regulator-always-on;
304 };
305 };
306 };
307};
308
309&i2c3 {
310 clock-frequency = <100000>;
311 pinctrl-names = "default";
312 pinctrl-0 = <&pinctrl_i2c3>;
313 status = "okay";
314
315 accelerometer: mma8450@1c {
316 compatible = "fsl,mma8450";
317 reg = <0x1c>;
318 };
319
320 codec: sgtl5000@a {
321 compatible = "fsl,sgtl5000";
322 reg = <0x0a>;
323 clocks = <&clks IMX6QDL_CLK_CKO>;
324 VDDA-supply = <&sw4_reg>;
325 VDDIO-supply = <®_3p3v>;
326 };
327
328 touchscreen: egalax_ts@4 {
329 compatible = "eeti,egalax_ts";
330 reg = <0x04>;
331 interrupt-parent = <&gpio7>;
332 interrupts = <12 2>;
333 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
334 };
335};
336
337&ldb {
338 status = "okay";
339};
340
341&pcie {
342 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
343 status = "okay";
344};
345
346&ssi1 {
347 status = "okay";
348};
349
350&uart1 {
351 pinctrl-names = "default";
352 pinctrl-0 = <&pinctrl_uart1>;
353 status = "okay";
354};
355
356&uart2 {
357 pinctrl-names = "default";
358 pinctrl-0 = <&pinctrl_uart2>;
359 status = "okay";
360};
361
362&uart5 {
363 pinctrl-names = "default";
364 pinctrl-0 = <&pinctrl_uart5>;
365 status = "okay";
366};
367
368&usbotg {
369 vbus-supply = <®_usb_otg_vbus>;
370 pinctrl-names = "default";
371 pinctrl-0 = <&pinctrl_usbotg>;
372 disable-over-current;
373 status = "okay";
374};
375
376&usbh1 {
377 vbus-supply = <®_usb_h1_vbus>;
378 status = "okay";
379};
380
381&usdhc3 {
382 pinctrl-names = "default";
383 pinctrl-0 = <&pinctrl_usdhc3>;
384 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
385 vmmc-supply = <®_3p3v>;
386 status = "okay";
387};
388
389&iomuxc {
390 pinctrl_audmux: audmuxgrp {
391 fsl,pins = <
392 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
393 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
394 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
395 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
396 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
397 >;
398 };
399
400 pinctrl_ecspi1: ecspi1grp {
401 fsl,pins = <
402 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
403 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
404 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
405 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */
406 >;
407 };
408
409 pinctrl_enet: enetgrp {
410 fsl,pins = <
411 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
412 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
413 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
414 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
415 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
416 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
417 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
418 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
419 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
420 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
421 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
422 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
423 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
424 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
425 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
426 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
427 >;
428 };
429
430 pinctrl_gpio_leds: gpioledsgrp {
431 fsl,pins = <
432 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */
433 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */
434 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */
435 >;
436 };
437
438 pinctrl_i2c1: i2c1grp {
439 fsl,pins = <
440 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
441 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
442 >;
443 };
444
445 pinctrl_i2c2: i2c2grp {
446 fsl,pins = <
447 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
448 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
449 >;
450 };
451
452 pinctrl_i2c3: i2c3grp {
453 fsl,pins = <
454 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
455 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
456 >;
457 };
458
459 pinctrl_pcie: pciegrp {
460 fsl,pins = <
461 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
462 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
463 >;
464 };
465
466 pinctrl_pps: ppsgrp {
467 fsl,pins = <
468 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */
469 >;
470 };
471
472 pinctrl_uart1: uart1grp {
473 fsl,pins = <
474 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
475 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
476 >;
477 };
478
479 pinctrl_uart2: uart2grp {
480 fsl,pins = <
481 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
482 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
483 >;
484 };
485
486 pinctrl_uart5: uart5grp {
487 fsl,pins = <
488 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
489 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
490 >;
491 };
492
493 pinctrl_usbotg: usbotggrp {
494 fsl,pins = <
495 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
496 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
497 >;
498 };
499
500 pinctrl_usdhc3: usdhc3grp {
501 fsl,pins = <
502 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
503 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
504 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
505 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
506 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
507 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
508 >;
509 };
510};