1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  2/*
  3 * Copyright 2021
  4 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
  5 */
  6
  7/dts-v1/;
  8#include "imx28.dtsi"
  9
 10/ {
 11	aliases {
 12		spi2 = &ssp3;
 13	};
 14
 15	chosen {
 16		bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1";
 17	};
 18
 19	memory@40000000 {
 20		reg = <0x40000000 0x08000000>;
 21	};
 22
 23	reg_3v3: regulator-reg-3v3 {
 24		compatible = "regulator-fixed";
 25		regulator-name = "3V3";
 26		regulator-min-microvolt = <3300000>;
 27		regulator-max-microvolt = <3300000>;
 28	};
 29
 30	reg_usb_5v: regulator-reg-usb-5v {
 31		compatible = "regulator-fixed";
 32		regulator-name = "usb_vbus";
 33		regulator-min-microvolt = <5000000>;
 34		regulator-max-microvolt = <5000000>;
 35	};
 36
 37	reg_fec_3v3: regulator-reg-fec-3v3 {
 38		compatible = "regulator-fixed";
 39		regulator-name = "fec-phy";
 40		regulator-min-microvolt = <3300000>;
 41		regulator-max-microvolt = <3300000>;
 42	};
 43};
 44
 45&duart {
 46	pinctrl-names = "default";
 47	pinctrl-0 = <&duart_pins_a>;
 48	status = "okay";
 49};
 50
 51&i2c0 {
 52	pinctrl-names = "default";
 53	pinctrl-0 = <&i2c0_pins_a>;
 54	status = "okay";
 55};
 56
 57&saif0 {
 58	pinctrl-names = "default";
 59	pinctrl-0 = <&saif0_pins_a>;
 60	#sound-dai-cells = <0>;
 61	assigned-clocks = <&clks 53>;
 62	assigned-clock-rates = <12000000>;
 63	status = "okay";
 64};
 65
 66&saif1 {
 67	pinctrl-names = "default";
 68	pinctrl-0 = <&saif1_pins_a>;
 69	fsl,saif-master = <&saif0>;
 70	#sound-dai-cells = <0>;
 71	status = "okay";
 72};
 73
 74&spi3_pins_a {
 75	fsl,pinmux-ids = <
 76		MX28_PAD_AUART2_RX__SSP3_D4
 77		MX28_PAD_AUART2_TX__SSP3_D5
 78		MX28_PAD_SSP3_SCK__SSP3_SCK
 79		MX28_PAD_SSP3_MOSI__SSP3_CMD
 80		MX28_PAD_SSP3_MISO__SSP3_D0
 81		MX28_PAD_SSP3_SS0__SSP3_D3
 82		MX28_PAD_AUART2_TX__GPIO_3_9
 83	>;
 84};
 85
 86&ssp0 {
 87	compatible = "fsl,imx28-mmc";
 88	pinctrl-names = "default";
 89	pinctrl-0 = <&mmc0_8bit_pins_a>;
 90	bus-width = <8>;
 91	vmmc-supply = <&reg_3v3>;
 92	non-removable;
 93	status = "okay";
 94};
 95
 96&ssp2 {
 97	compatible = "fsl,imx28-spi";
 98	pinctrl-names = "default";
 99	pinctrl-0 = <&spi2_pins_a>;
100	status = "okay";
101};
102
103&ssp3 {
104	compatible = "fsl,imx28-spi";
105	pinctrl-names = "default";
106	pinctrl-0 = <&spi3_pins_a>;
107	status = "okay";
108
109	flash@0 {
110		compatible = "jedec,spi-nor";
111		spi-max-frequency = <40000000>;
112		reg = <0>;
113
114		partitions {
115			compatible = "fixed-partitions";
116			#address-cells = <1>;
117			#size-cells = <1>;
118
119			partition@0 {
120				label = "u-boot";
121				reg = <0 0x80000>;
122				read-only;
123			};
124
125			partition@80000 {
126				label = "env0";
127				reg = <0x80000 0x10000>;
128			};
129
130			partition@90000 {
131				label = "env1";
132				reg = <0x90000 0x10000>;
133			};
134
135			partition@100000 {
136				label = "kernel";
137				reg = <0x100000 0x400000>;
138			};
139
140			partition@500000 {
141				label = "swupdate";
142				reg = <0x500000 0x800000>;
143			};
144		};
145	};
146};
147
148&usb0 {
149	vbus-supply = <&reg_usb_5v>;
150	pinctrl-names = "default";
151	pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>;
152	dr_mode = "host";
153	status = "okay";
154};
155
156&usbphy0 {
157	status = "okay";
158};
159
160&usb1 {
161	vbus-supply = <&reg_usb_5v>;
162	pinctrl-names = "default";
163	pinctrl-0 = <&usb1_pins_b>;
164	dr_mode = "host";
165	status = "okay";
166};
167
168&usbphy1 {
169	status = "okay";
170};