Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
  1// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
  2
  3#include <dt-bindings/interrupt-controller/irq.h>
  4#include <dt-bindings/interrupt-controller/arm-gic.h>
  5#include <dt-bindings/gpio/gpio.h>
  6#include <dt-bindings/clock/en7523-clk.h>
  7
  8/ {
  9	interrupt-parent = <&gic>;
 10	#address-cells = <1>;
 11	#size-cells = <1>;
 12
 13	reserved-memory {
 14		#address-cells = <1>;
 15		#size-cells = <1>;
 16		ranges;
 17
 18		npu_binary@84000000 {
 19			no-map;
 20			reg = <0x84000000 0xA00000>;
 21		};
 22
 23		npu_flag@84B0000 {
 24			no-map;
 25			reg = <0x84B00000 0x100000>;
 26		};
 27
 28		npu_pkt@85000000 {
 29			no-map;
 30			reg = <0x85000000 0x1A00000>;
 31		};
 32
 33		npu_phyaddr@86B00000 {
 34			no-map;
 35			reg = <0x86B00000 0x100000>;
 36		};
 37
 38		npu_rxdesc@86D00000 {
 39			no-map;
 40			reg = <0x86D00000 0x100000>;
 41		};
 42	};
 43
 44	psci {
 45		compatible = "arm,psci-0.2";
 46		method = "smc";
 47	};
 48
 49	cpus {
 50		#address-cells = <1>;
 51		#size-cells = <0>;
 52
 53		cpu-map {
 54			cluster0 {
 55				core0 {
 56					cpu = <&cpu0>;
 57				};
 58				core1 {
 59					cpu = <&cpu1>;
 60				};
 61			};
 62		};
 63
 64		cpu0: cpu@0 {
 65			device_type = "cpu";
 66			compatible = "arm,cortex-a53";
 67			reg = <0x0>;
 68			enable-method = "psci";
 69			clock-frequency = <80000000>;
 70			next-level-cache = <&L2_0>;
 71		};
 72
 73		cpu1: cpu@1 {
 74			device_type = "cpu";
 75			compatible = "arm,cortex-a53";
 76			reg = <0x1>;
 77			enable-method = "psci";
 78			clock-frequency = <80000000>;
 79			next-level-cache = <&L2_0>;
 80		};
 81
 82		L2_0: l2-cache0 {
 83			compatible = "cache";
 84		};
 85	};
 86
 87	scu: system-controller@1fa20000 {
 88		compatible = "airoha,en7523-scu";
 89		reg = <0x1fa20000 0x400>,
 90		      <0x1fb00000 0x1000>;
 91		#clock-cells = <1>;
 92	};
 93
 94	gic: interrupt-controller@9000000 {
 95		compatible = "arm,gic-v3";
 96		interrupt-controller;
 97		#interrupt-cells = <3>;
 98		#address-cells = <1>;
 99		#size-cells = <1>;
100		reg = <0x09000000 0x20000>,
101		      <0x09080000 0x80000>,
102		      <0x09400000 0x2000>,
103		      <0x09500000 0x2000>,
104		      <0x09600000 0x20000>;
105		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
106	};
107
108	timer {
109		compatible = "arm,armv8-timer";
110		interrupt-parent = <&gic>;
111		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
112			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
113			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
114			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
115	};
116
117	uart1: serial@1fbf0000 {
118		compatible = "ns16550";
119		reg = <0x1fbf0000 0x30>;
120		reg-io-width = <4>;
121		reg-shift = <2>;
122		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
123		clock-frequency = <1843200>;
124		status = "okay";
125	};
126
127	gpio0: gpio@1fbf0200 {
128		compatible = "airoha,en7523-gpio";
129		reg = <0x1fbf0204 0x4>,
130		      <0x1fbf0200 0x4>,
131		      <0x1fbf0220 0x4>,
132		      <0x1fbf0214 0x4>;
133		gpio-controller;
134		#gpio-cells = <2>;
135	};
136
137	gpio1: gpio@1fbf0270 {
138		compatible = "airoha,en7523-gpio";
139		reg = <0x1fbf0270 0x4>,
140		      <0x1fbf0260 0x4>,
141		      <0x1fbf0264 0x4>,
142		      <0x1fbf0278 0x4>;
143		gpio-controller;
144		#gpio-cells = <2>;
145	};
146
147	pcie0: pcie@1fa91000 {
148		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
149		device_type = "pci";
150		reg = <0x1fa91000 0x1000>;
151		reg-names = "port0";
152		linux,pci-domain = <0>;
153		#address-cells = <3>;
154		#size-cells = <2>;
155		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
156		interrupt-names = "pcie_irq";
157		clocks = <&scu EN7523_CLK_PCIE>;
158		clock-names = "sys_ck0";
159		bus-range = <0x00 0xff>;
160		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
161		status = "disabled";
162
163		#interrupt-cells = <1>;
164		interrupt-map-mask = <0 0 0 7>;
165		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
166				<0 0 0 2 &pcie_intc0 1>,
167				<0 0 0 3 &pcie_intc0 2>,
168				<0 0 0 4 &pcie_intc0 3>;
169		pcie_intc0: interrupt-controller {
170			interrupt-controller;
171			#address-cells = <0>;
172			#interrupt-cells = <1>;
173		};
174	};
175
176	pcie1: pcie@1fa92000 {
177		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
178		device_type = "pci";
179		reg = <0x1fa92000 0x1000>;
180		reg-names = "port1";
181		linux,pci-domain = <1>;
182		#address-cells = <3>;
183		#size-cells = <2>;
184		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
185		interrupt-names = "pcie_irq";
186		clocks = <&scu EN7523_CLK_PCIE>;
187		clock-names = "sys_ck1";
188		bus-range = <0x00 0xff>;
189		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
190		status = "disabled";
191
192		#interrupt-cells = <1>;
193		interrupt-map-mask = <0 0 0 7>;
194		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
195				<0 0 0 2 &pcie_intc1 1>,
196				<0 0 0 3 &pcie_intc1 2>,
197				<0 0 0 4 &pcie_intc1 3>;
198		pcie_intc1: interrupt-controller {
199			interrupt-controller;
200			#address-cells = <0>;
201			#interrupt-cells = <1>;
202		};
203	};
204};