Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * sd.c Copyright (C) 1992 Drew Eckhardt
4 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
5 *
6 * Linux scsi disk driver
7 * Initial versions: Drew Eckhardt
8 * Subsequent revisions: Eric Youngdale
9 * Modification history:
10 * - Drew Eckhardt <drew@colorado.edu> original
11 * - Eric Youngdale <eric@andante.org> add scatter-gather, multiple
12 * outstanding request, and other enhancements.
13 * Support loadable low-level scsi drivers.
14 * - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using
15 * eight major numbers.
16 * - Richard Gooch <rgooch@atnf.csiro.au> support devfs.
17 * - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in
18 * sd_init and cleanups.
19 * - Alex Davis <letmein@erols.com> Fix problem where partition info
20 * not being read in sd_open. Fix problem where removable media
21 * could be ejected after sd_open.
22 * - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x
23 * - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox
24 * <willy@debian.org>, Kurt Garloff <garloff@suse.de>:
25 * Support 32k/1M disks.
26 *
27 * Logging policy (needs CONFIG_SCSI_LOGGING defined):
28 * - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
29 * - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
30 * - entering sd_ioctl: SCSI_LOG_IOCTL level 1
31 * - entering other commands: SCSI_LOG_HLQUEUE level 3
32 * Note: when the logging level is set by the user, it must be greater
33 * than the level indicated above to trigger output.
34 */
35
36#include <linux/module.h>
37#include <linux/fs.h>
38#include <linux/kernel.h>
39#include <linux/mm.h>
40#include <linux/bio.h>
41#include <linux/hdreg.h>
42#include <linux/errno.h>
43#include <linux/idr.h>
44#include <linux/interrupt.h>
45#include <linux/init.h>
46#include <linux/blkdev.h>
47#include <linux/blkpg.h>
48#include <linux/blk-pm.h>
49#include <linux/delay.h>
50#include <linux/major.h>
51#include <linux/mutex.h>
52#include <linux/string_helpers.h>
53#include <linux/slab.h>
54#include <linux/sed-opal.h>
55#include <linux/pm_runtime.h>
56#include <linux/pr.h>
57#include <linux/t10-pi.h>
58#include <linux/uaccess.h>
59#include <asm/unaligned.h>
60
61#include <scsi/scsi.h>
62#include <scsi/scsi_cmnd.h>
63#include <scsi/scsi_dbg.h>
64#include <scsi/scsi_device.h>
65#include <scsi/scsi_driver.h>
66#include <scsi/scsi_eh.h>
67#include <scsi/scsi_host.h>
68#include <scsi/scsi_ioctl.h>
69#include <scsi/scsicam.h>
70
71#include "sd.h"
72#include "scsi_priv.h"
73#include "scsi_logging.h"
74
75MODULE_AUTHOR("Eric Youngdale");
76MODULE_DESCRIPTION("SCSI disk (sd) driver");
77MODULE_LICENSE("GPL");
78
79MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
80MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
81MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
82MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
83MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
84MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
85MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
86MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
87MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
88MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
89MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
90MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
91MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
92MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
93MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
94MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
95MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
96MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
97MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
98MODULE_ALIAS_SCSI_DEVICE(TYPE_ZBC);
99
100#define SD_MINORS 16
101
102static void sd_config_discard(struct scsi_disk *, unsigned int);
103static void sd_config_write_same(struct scsi_disk *);
104static int sd_revalidate_disk(struct gendisk *);
105static void sd_unlock_native_capacity(struct gendisk *disk);
106static int sd_probe(struct device *);
107static int sd_remove(struct device *);
108static void sd_shutdown(struct device *);
109static int sd_suspend_system(struct device *);
110static int sd_suspend_runtime(struct device *);
111static int sd_resume_system(struct device *);
112static int sd_resume_runtime(struct device *);
113static void sd_rescan(struct device *);
114static blk_status_t sd_init_command(struct scsi_cmnd *SCpnt);
115static void sd_uninit_command(struct scsi_cmnd *SCpnt);
116static int sd_done(struct scsi_cmnd *);
117static void sd_eh_reset(struct scsi_cmnd *);
118static int sd_eh_action(struct scsi_cmnd *, int);
119static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
120static void scsi_disk_release(struct device *cdev);
121
122static DEFINE_IDA(sd_index_ida);
123
124static struct kmem_cache *sd_cdb_cache;
125static mempool_t *sd_page_pool;
126static struct lock_class_key sd_bio_compl_lkclass;
127
128static const char *sd_cache_types[] = {
129 "write through", "none", "write back",
130 "write back, no read (daft)"
131};
132
133static void sd_set_flush_flag(struct scsi_disk *sdkp)
134{
135 bool wc = false, fua = false;
136
137 if (sdkp->WCE) {
138 wc = true;
139 if (sdkp->DPOFUA)
140 fua = true;
141 }
142
143 blk_queue_write_cache(sdkp->disk->queue, wc, fua);
144}
145
146static ssize_t
147cache_type_store(struct device *dev, struct device_attribute *attr,
148 const char *buf, size_t count)
149{
150 int ct, rcd, wce, sp;
151 struct scsi_disk *sdkp = to_scsi_disk(dev);
152 struct scsi_device *sdp = sdkp->device;
153 char buffer[64];
154 char *buffer_data;
155 struct scsi_mode_data data;
156 struct scsi_sense_hdr sshdr;
157 static const char temp[] = "temporary ";
158 int len;
159
160 if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
161 /* no cache control on RBC devices; theoretically they
162 * can do it, but there's probably so many exceptions
163 * it's not worth the risk */
164 return -EINVAL;
165
166 if (strncmp(buf, temp, sizeof(temp) - 1) == 0) {
167 buf += sizeof(temp) - 1;
168 sdkp->cache_override = 1;
169 } else {
170 sdkp->cache_override = 0;
171 }
172
173 ct = sysfs_match_string(sd_cache_types, buf);
174 if (ct < 0)
175 return -EINVAL;
176
177 rcd = ct & 0x01 ? 1 : 0;
178 wce = (ct & 0x02) && !sdkp->write_prot ? 1 : 0;
179
180 if (sdkp->cache_override) {
181 sdkp->WCE = wce;
182 sdkp->RCD = rcd;
183 sd_set_flush_flag(sdkp);
184 return count;
185 }
186
187 if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
188 sdkp->max_retries, &data, NULL))
189 return -EINVAL;
190 len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
191 data.block_descriptor_length);
192 buffer_data = buffer + data.header_length +
193 data.block_descriptor_length;
194 buffer_data[2] &= ~0x05;
195 buffer_data[2] |= wce << 2 | rcd;
196 sp = buffer_data[0] & 0x80 ? 1 : 0;
197 buffer_data[0] &= ~0x80;
198
199 /*
200 * Ensure WP, DPOFUA, and RESERVED fields are cleared in
201 * received mode parameter buffer before doing MODE SELECT.
202 */
203 data.device_specific = 0;
204
205 if (scsi_mode_select(sdp, 1, sp, buffer_data, len, SD_TIMEOUT,
206 sdkp->max_retries, &data, &sshdr)) {
207 if (scsi_sense_valid(&sshdr))
208 sd_print_sense_hdr(sdkp, &sshdr);
209 return -EINVAL;
210 }
211 sd_revalidate_disk(sdkp->disk);
212 return count;
213}
214
215static ssize_t
216manage_start_stop_show(struct device *dev, struct device_attribute *attr,
217 char *buf)
218{
219 struct scsi_disk *sdkp = to_scsi_disk(dev);
220 struct scsi_device *sdp = sdkp->device;
221
222 return sprintf(buf, "%u\n", sdp->manage_start_stop);
223}
224
225static ssize_t
226manage_start_stop_store(struct device *dev, struct device_attribute *attr,
227 const char *buf, size_t count)
228{
229 struct scsi_disk *sdkp = to_scsi_disk(dev);
230 struct scsi_device *sdp = sdkp->device;
231 bool v;
232
233 if (!capable(CAP_SYS_ADMIN))
234 return -EACCES;
235
236 if (kstrtobool(buf, &v))
237 return -EINVAL;
238
239 sdp->manage_start_stop = v;
240
241 return count;
242}
243static DEVICE_ATTR_RW(manage_start_stop);
244
245static ssize_t
246allow_restart_show(struct device *dev, struct device_attribute *attr, char *buf)
247{
248 struct scsi_disk *sdkp = to_scsi_disk(dev);
249
250 return sprintf(buf, "%u\n", sdkp->device->allow_restart);
251}
252
253static ssize_t
254allow_restart_store(struct device *dev, struct device_attribute *attr,
255 const char *buf, size_t count)
256{
257 bool v;
258 struct scsi_disk *sdkp = to_scsi_disk(dev);
259 struct scsi_device *sdp = sdkp->device;
260
261 if (!capable(CAP_SYS_ADMIN))
262 return -EACCES;
263
264 if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
265 return -EINVAL;
266
267 if (kstrtobool(buf, &v))
268 return -EINVAL;
269
270 sdp->allow_restart = v;
271
272 return count;
273}
274static DEVICE_ATTR_RW(allow_restart);
275
276static ssize_t
277cache_type_show(struct device *dev, struct device_attribute *attr, char *buf)
278{
279 struct scsi_disk *sdkp = to_scsi_disk(dev);
280 int ct = sdkp->RCD + 2*sdkp->WCE;
281
282 return sprintf(buf, "%s\n", sd_cache_types[ct]);
283}
284static DEVICE_ATTR_RW(cache_type);
285
286static ssize_t
287FUA_show(struct device *dev, struct device_attribute *attr, char *buf)
288{
289 struct scsi_disk *sdkp = to_scsi_disk(dev);
290
291 return sprintf(buf, "%u\n", sdkp->DPOFUA);
292}
293static DEVICE_ATTR_RO(FUA);
294
295static ssize_t
296protection_type_show(struct device *dev, struct device_attribute *attr,
297 char *buf)
298{
299 struct scsi_disk *sdkp = to_scsi_disk(dev);
300
301 return sprintf(buf, "%u\n", sdkp->protection_type);
302}
303
304static ssize_t
305protection_type_store(struct device *dev, struct device_attribute *attr,
306 const char *buf, size_t count)
307{
308 struct scsi_disk *sdkp = to_scsi_disk(dev);
309 unsigned int val;
310 int err;
311
312 if (!capable(CAP_SYS_ADMIN))
313 return -EACCES;
314
315 err = kstrtouint(buf, 10, &val);
316
317 if (err)
318 return err;
319
320 if (val <= T10_PI_TYPE3_PROTECTION)
321 sdkp->protection_type = val;
322
323 return count;
324}
325static DEVICE_ATTR_RW(protection_type);
326
327static ssize_t
328protection_mode_show(struct device *dev, struct device_attribute *attr,
329 char *buf)
330{
331 struct scsi_disk *sdkp = to_scsi_disk(dev);
332 struct scsi_device *sdp = sdkp->device;
333 unsigned int dif, dix;
334
335 dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
336 dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type);
337
338 if (!dix && scsi_host_dix_capable(sdp->host, T10_PI_TYPE0_PROTECTION)) {
339 dif = 0;
340 dix = 1;
341 }
342
343 if (!dif && !dix)
344 return sprintf(buf, "none\n");
345
346 return sprintf(buf, "%s%u\n", dix ? "dix" : "dif", dif);
347}
348static DEVICE_ATTR_RO(protection_mode);
349
350static ssize_t
351app_tag_own_show(struct device *dev, struct device_attribute *attr, char *buf)
352{
353 struct scsi_disk *sdkp = to_scsi_disk(dev);
354
355 return sprintf(buf, "%u\n", sdkp->ATO);
356}
357static DEVICE_ATTR_RO(app_tag_own);
358
359static ssize_t
360thin_provisioning_show(struct device *dev, struct device_attribute *attr,
361 char *buf)
362{
363 struct scsi_disk *sdkp = to_scsi_disk(dev);
364
365 return sprintf(buf, "%u\n", sdkp->lbpme);
366}
367static DEVICE_ATTR_RO(thin_provisioning);
368
369/* sysfs_match_string() requires dense arrays */
370static const char *lbp_mode[] = {
371 [SD_LBP_FULL] = "full",
372 [SD_LBP_UNMAP] = "unmap",
373 [SD_LBP_WS16] = "writesame_16",
374 [SD_LBP_WS10] = "writesame_10",
375 [SD_LBP_ZERO] = "writesame_zero",
376 [SD_LBP_DISABLE] = "disabled",
377};
378
379static ssize_t
380provisioning_mode_show(struct device *dev, struct device_attribute *attr,
381 char *buf)
382{
383 struct scsi_disk *sdkp = to_scsi_disk(dev);
384
385 return sprintf(buf, "%s\n", lbp_mode[sdkp->provisioning_mode]);
386}
387
388static ssize_t
389provisioning_mode_store(struct device *dev, struct device_attribute *attr,
390 const char *buf, size_t count)
391{
392 struct scsi_disk *sdkp = to_scsi_disk(dev);
393 struct scsi_device *sdp = sdkp->device;
394 int mode;
395
396 if (!capable(CAP_SYS_ADMIN))
397 return -EACCES;
398
399 if (sd_is_zoned(sdkp)) {
400 sd_config_discard(sdkp, SD_LBP_DISABLE);
401 return count;
402 }
403
404 if (sdp->type != TYPE_DISK)
405 return -EINVAL;
406
407 mode = sysfs_match_string(lbp_mode, buf);
408 if (mode < 0)
409 return -EINVAL;
410
411 sd_config_discard(sdkp, mode);
412
413 return count;
414}
415static DEVICE_ATTR_RW(provisioning_mode);
416
417/* sysfs_match_string() requires dense arrays */
418static const char *zeroing_mode[] = {
419 [SD_ZERO_WRITE] = "write",
420 [SD_ZERO_WS] = "writesame",
421 [SD_ZERO_WS16_UNMAP] = "writesame_16_unmap",
422 [SD_ZERO_WS10_UNMAP] = "writesame_10_unmap",
423};
424
425static ssize_t
426zeroing_mode_show(struct device *dev, struct device_attribute *attr,
427 char *buf)
428{
429 struct scsi_disk *sdkp = to_scsi_disk(dev);
430
431 return sprintf(buf, "%s\n", zeroing_mode[sdkp->zeroing_mode]);
432}
433
434static ssize_t
435zeroing_mode_store(struct device *dev, struct device_attribute *attr,
436 const char *buf, size_t count)
437{
438 struct scsi_disk *sdkp = to_scsi_disk(dev);
439 int mode;
440
441 if (!capable(CAP_SYS_ADMIN))
442 return -EACCES;
443
444 mode = sysfs_match_string(zeroing_mode, buf);
445 if (mode < 0)
446 return -EINVAL;
447
448 sdkp->zeroing_mode = mode;
449
450 return count;
451}
452static DEVICE_ATTR_RW(zeroing_mode);
453
454static ssize_t
455max_medium_access_timeouts_show(struct device *dev,
456 struct device_attribute *attr, char *buf)
457{
458 struct scsi_disk *sdkp = to_scsi_disk(dev);
459
460 return sprintf(buf, "%u\n", sdkp->max_medium_access_timeouts);
461}
462
463static ssize_t
464max_medium_access_timeouts_store(struct device *dev,
465 struct device_attribute *attr, const char *buf,
466 size_t count)
467{
468 struct scsi_disk *sdkp = to_scsi_disk(dev);
469 int err;
470
471 if (!capable(CAP_SYS_ADMIN))
472 return -EACCES;
473
474 err = kstrtouint(buf, 10, &sdkp->max_medium_access_timeouts);
475
476 return err ? err : count;
477}
478static DEVICE_ATTR_RW(max_medium_access_timeouts);
479
480static ssize_t
481max_write_same_blocks_show(struct device *dev, struct device_attribute *attr,
482 char *buf)
483{
484 struct scsi_disk *sdkp = to_scsi_disk(dev);
485
486 return sprintf(buf, "%u\n", sdkp->max_ws_blocks);
487}
488
489static ssize_t
490max_write_same_blocks_store(struct device *dev, struct device_attribute *attr,
491 const char *buf, size_t count)
492{
493 struct scsi_disk *sdkp = to_scsi_disk(dev);
494 struct scsi_device *sdp = sdkp->device;
495 unsigned long max;
496 int err;
497
498 if (!capable(CAP_SYS_ADMIN))
499 return -EACCES;
500
501 if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
502 return -EINVAL;
503
504 err = kstrtoul(buf, 10, &max);
505
506 if (err)
507 return err;
508
509 if (max == 0)
510 sdp->no_write_same = 1;
511 else if (max <= SD_MAX_WS16_BLOCKS) {
512 sdp->no_write_same = 0;
513 sdkp->max_ws_blocks = max;
514 }
515
516 sd_config_write_same(sdkp);
517
518 return count;
519}
520static DEVICE_ATTR_RW(max_write_same_blocks);
521
522static ssize_t
523zoned_cap_show(struct device *dev, struct device_attribute *attr, char *buf)
524{
525 struct scsi_disk *sdkp = to_scsi_disk(dev);
526
527 if (sdkp->device->type == TYPE_ZBC)
528 return sprintf(buf, "host-managed\n");
529 if (sdkp->zoned == 1)
530 return sprintf(buf, "host-aware\n");
531 if (sdkp->zoned == 2)
532 return sprintf(buf, "drive-managed\n");
533 return sprintf(buf, "none\n");
534}
535static DEVICE_ATTR_RO(zoned_cap);
536
537static ssize_t
538max_retries_store(struct device *dev, struct device_attribute *attr,
539 const char *buf, size_t count)
540{
541 struct scsi_disk *sdkp = to_scsi_disk(dev);
542 struct scsi_device *sdev = sdkp->device;
543 int retries, err;
544
545 err = kstrtoint(buf, 10, &retries);
546 if (err)
547 return err;
548
549 if (retries == SCSI_CMD_RETRIES_NO_LIMIT || retries <= SD_MAX_RETRIES) {
550 sdkp->max_retries = retries;
551 return count;
552 }
553
554 sdev_printk(KERN_ERR, sdev, "max_retries must be between -1 and %d\n",
555 SD_MAX_RETRIES);
556 return -EINVAL;
557}
558
559static ssize_t
560max_retries_show(struct device *dev, struct device_attribute *attr,
561 char *buf)
562{
563 struct scsi_disk *sdkp = to_scsi_disk(dev);
564
565 return sprintf(buf, "%d\n", sdkp->max_retries);
566}
567
568static DEVICE_ATTR_RW(max_retries);
569
570static struct attribute *sd_disk_attrs[] = {
571 &dev_attr_cache_type.attr,
572 &dev_attr_FUA.attr,
573 &dev_attr_allow_restart.attr,
574 &dev_attr_manage_start_stop.attr,
575 &dev_attr_protection_type.attr,
576 &dev_attr_protection_mode.attr,
577 &dev_attr_app_tag_own.attr,
578 &dev_attr_thin_provisioning.attr,
579 &dev_attr_provisioning_mode.attr,
580 &dev_attr_zeroing_mode.attr,
581 &dev_attr_max_write_same_blocks.attr,
582 &dev_attr_max_medium_access_timeouts.attr,
583 &dev_attr_zoned_cap.attr,
584 &dev_attr_max_retries.attr,
585 NULL,
586};
587ATTRIBUTE_GROUPS(sd_disk);
588
589static struct class sd_disk_class = {
590 .name = "scsi_disk",
591 .owner = THIS_MODULE,
592 .dev_release = scsi_disk_release,
593 .dev_groups = sd_disk_groups,
594};
595
596static const struct dev_pm_ops sd_pm_ops = {
597 .suspend = sd_suspend_system,
598 .resume = sd_resume_system,
599 .poweroff = sd_suspend_system,
600 .restore = sd_resume_system,
601 .runtime_suspend = sd_suspend_runtime,
602 .runtime_resume = sd_resume_runtime,
603};
604
605static struct scsi_driver sd_template = {
606 .gendrv = {
607 .name = "sd",
608 .owner = THIS_MODULE,
609 .probe = sd_probe,
610 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
611 .remove = sd_remove,
612 .shutdown = sd_shutdown,
613 .pm = &sd_pm_ops,
614 },
615 .rescan = sd_rescan,
616 .init_command = sd_init_command,
617 .uninit_command = sd_uninit_command,
618 .done = sd_done,
619 .eh_action = sd_eh_action,
620 .eh_reset = sd_eh_reset,
621};
622
623/*
624 * Don't request a new module, as that could deadlock in multipath
625 * environment.
626 */
627static void sd_default_probe(dev_t devt)
628{
629}
630
631/*
632 * Device no to disk mapping:
633 *
634 * major disc2 disc p1
635 * |............|.............|....|....| <- dev_t
636 * 31 20 19 8 7 4 3 0
637 *
638 * Inside a major, we have 16k disks, however mapped non-
639 * contiguously. The first 16 disks are for major0, the next
640 * ones with major1, ... Disk 256 is for major0 again, disk 272
641 * for major1, ...
642 * As we stay compatible with our numbering scheme, we can reuse
643 * the well-know SCSI majors 8, 65--71, 136--143.
644 */
645static int sd_major(int major_idx)
646{
647 switch (major_idx) {
648 case 0:
649 return SCSI_DISK0_MAJOR;
650 case 1 ... 7:
651 return SCSI_DISK1_MAJOR + major_idx - 1;
652 case 8 ... 15:
653 return SCSI_DISK8_MAJOR + major_idx - 8;
654 default:
655 BUG();
656 return 0; /* shut up gcc */
657 }
658}
659
660#ifdef CONFIG_BLK_SED_OPAL
661static int sd_sec_submit(void *data, u16 spsp, u8 secp, void *buffer,
662 size_t len, bool send)
663{
664 struct scsi_disk *sdkp = data;
665 struct scsi_device *sdev = sdkp->device;
666 u8 cdb[12] = { 0, };
667 int ret;
668
669 cdb[0] = send ? SECURITY_PROTOCOL_OUT : SECURITY_PROTOCOL_IN;
670 cdb[1] = secp;
671 put_unaligned_be16(spsp, &cdb[2]);
672 put_unaligned_be32(len, &cdb[6]);
673
674 ret = scsi_execute(sdev, cdb, send ? DMA_TO_DEVICE : DMA_FROM_DEVICE,
675 buffer, len, NULL, NULL, SD_TIMEOUT, sdkp->max_retries, 0,
676 RQF_PM, NULL);
677 return ret <= 0 ? ret : -EIO;
678}
679#endif /* CONFIG_BLK_SED_OPAL */
680
681/*
682 * Look up the DIX operation based on whether the command is read or
683 * write and whether dix and dif are enabled.
684 */
685static unsigned int sd_prot_op(bool write, bool dix, bool dif)
686{
687 /* Lookup table: bit 2 (write), bit 1 (dix), bit 0 (dif) */
688 static const unsigned int ops[] = { /* wrt dix dif */
689 SCSI_PROT_NORMAL, /* 0 0 0 */
690 SCSI_PROT_READ_STRIP, /* 0 0 1 */
691 SCSI_PROT_READ_INSERT, /* 0 1 0 */
692 SCSI_PROT_READ_PASS, /* 0 1 1 */
693 SCSI_PROT_NORMAL, /* 1 0 0 */
694 SCSI_PROT_WRITE_INSERT, /* 1 0 1 */
695 SCSI_PROT_WRITE_STRIP, /* 1 1 0 */
696 SCSI_PROT_WRITE_PASS, /* 1 1 1 */
697 };
698
699 return ops[write << 2 | dix << 1 | dif];
700}
701
702/*
703 * Returns a mask of the protection flags that are valid for a given DIX
704 * operation.
705 */
706static unsigned int sd_prot_flag_mask(unsigned int prot_op)
707{
708 static const unsigned int flag_mask[] = {
709 [SCSI_PROT_NORMAL] = 0,
710
711 [SCSI_PROT_READ_STRIP] = SCSI_PROT_TRANSFER_PI |
712 SCSI_PROT_GUARD_CHECK |
713 SCSI_PROT_REF_CHECK |
714 SCSI_PROT_REF_INCREMENT,
715
716 [SCSI_PROT_READ_INSERT] = SCSI_PROT_REF_INCREMENT |
717 SCSI_PROT_IP_CHECKSUM,
718
719 [SCSI_PROT_READ_PASS] = SCSI_PROT_TRANSFER_PI |
720 SCSI_PROT_GUARD_CHECK |
721 SCSI_PROT_REF_CHECK |
722 SCSI_PROT_REF_INCREMENT |
723 SCSI_PROT_IP_CHECKSUM,
724
725 [SCSI_PROT_WRITE_INSERT] = SCSI_PROT_TRANSFER_PI |
726 SCSI_PROT_REF_INCREMENT,
727
728 [SCSI_PROT_WRITE_STRIP] = SCSI_PROT_GUARD_CHECK |
729 SCSI_PROT_REF_CHECK |
730 SCSI_PROT_REF_INCREMENT |
731 SCSI_PROT_IP_CHECKSUM,
732
733 [SCSI_PROT_WRITE_PASS] = SCSI_PROT_TRANSFER_PI |
734 SCSI_PROT_GUARD_CHECK |
735 SCSI_PROT_REF_CHECK |
736 SCSI_PROT_REF_INCREMENT |
737 SCSI_PROT_IP_CHECKSUM,
738 };
739
740 return flag_mask[prot_op];
741}
742
743static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd,
744 unsigned int dix, unsigned int dif)
745{
746 struct request *rq = scsi_cmd_to_rq(scmd);
747 struct bio *bio = rq->bio;
748 unsigned int prot_op = sd_prot_op(rq_data_dir(rq), dix, dif);
749 unsigned int protect = 0;
750
751 if (dix) { /* DIX Type 0, 1, 2, 3 */
752 if (bio_integrity_flagged(bio, BIP_IP_CHECKSUM))
753 scmd->prot_flags |= SCSI_PROT_IP_CHECKSUM;
754
755 if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
756 scmd->prot_flags |= SCSI_PROT_GUARD_CHECK;
757 }
758
759 if (dif != T10_PI_TYPE3_PROTECTION) { /* DIX/DIF Type 0, 1, 2 */
760 scmd->prot_flags |= SCSI_PROT_REF_INCREMENT;
761
762 if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
763 scmd->prot_flags |= SCSI_PROT_REF_CHECK;
764 }
765
766 if (dif) { /* DIX/DIF Type 1, 2, 3 */
767 scmd->prot_flags |= SCSI_PROT_TRANSFER_PI;
768
769 if (bio_integrity_flagged(bio, BIP_DISK_NOCHECK))
770 protect = 3 << 5; /* Disable target PI checking */
771 else
772 protect = 1 << 5; /* Enable target PI checking */
773 }
774
775 scsi_set_prot_op(scmd, prot_op);
776 scsi_set_prot_type(scmd, dif);
777 scmd->prot_flags &= sd_prot_flag_mask(prot_op);
778
779 return protect;
780}
781
782static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
783{
784 struct request_queue *q = sdkp->disk->queue;
785 unsigned int logical_block_size = sdkp->device->sector_size;
786 unsigned int max_blocks = 0;
787
788 q->limits.discard_alignment =
789 sdkp->unmap_alignment * logical_block_size;
790 q->limits.discard_granularity =
791 max(sdkp->physical_block_size,
792 sdkp->unmap_granularity * logical_block_size);
793 sdkp->provisioning_mode = mode;
794
795 switch (mode) {
796
797 case SD_LBP_FULL:
798 case SD_LBP_DISABLE:
799 blk_queue_max_discard_sectors(q, 0);
800 return;
801
802 case SD_LBP_UNMAP:
803 max_blocks = min_not_zero(sdkp->max_unmap_blocks,
804 (u32)SD_MAX_WS16_BLOCKS);
805 break;
806
807 case SD_LBP_WS16:
808 if (sdkp->device->unmap_limit_for_ws)
809 max_blocks = sdkp->max_unmap_blocks;
810 else
811 max_blocks = sdkp->max_ws_blocks;
812
813 max_blocks = min_not_zero(max_blocks, (u32)SD_MAX_WS16_BLOCKS);
814 break;
815
816 case SD_LBP_WS10:
817 if (sdkp->device->unmap_limit_for_ws)
818 max_blocks = sdkp->max_unmap_blocks;
819 else
820 max_blocks = sdkp->max_ws_blocks;
821
822 max_blocks = min_not_zero(max_blocks, (u32)SD_MAX_WS10_BLOCKS);
823 break;
824
825 case SD_LBP_ZERO:
826 max_blocks = min_not_zero(sdkp->max_ws_blocks,
827 (u32)SD_MAX_WS10_BLOCKS);
828 break;
829 }
830
831 blk_queue_max_discard_sectors(q, max_blocks * (logical_block_size >> 9));
832}
833
834static blk_status_t sd_setup_unmap_cmnd(struct scsi_cmnd *cmd)
835{
836 struct scsi_device *sdp = cmd->device;
837 struct request *rq = scsi_cmd_to_rq(cmd);
838 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
839 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
840 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
841 unsigned int data_len = 24;
842 char *buf;
843
844 rq->special_vec.bv_page = mempool_alloc(sd_page_pool, GFP_ATOMIC);
845 if (!rq->special_vec.bv_page)
846 return BLK_STS_RESOURCE;
847 clear_highpage(rq->special_vec.bv_page);
848 rq->special_vec.bv_offset = 0;
849 rq->special_vec.bv_len = data_len;
850 rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
851
852 cmd->cmd_len = 10;
853 cmd->cmnd[0] = UNMAP;
854 cmd->cmnd[8] = 24;
855
856 buf = bvec_virt(&rq->special_vec);
857 put_unaligned_be16(6 + 16, &buf[0]);
858 put_unaligned_be16(16, &buf[2]);
859 put_unaligned_be64(lba, &buf[8]);
860 put_unaligned_be32(nr_blocks, &buf[16]);
861
862 cmd->allowed = sdkp->max_retries;
863 cmd->transfersize = data_len;
864 rq->timeout = SD_TIMEOUT;
865
866 return scsi_alloc_sgtables(cmd);
867}
868
869static blk_status_t sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd,
870 bool unmap)
871{
872 struct scsi_device *sdp = cmd->device;
873 struct request *rq = scsi_cmd_to_rq(cmd);
874 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
875 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
876 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
877 u32 data_len = sdp->sector_size;
878
879 rq->special_vec.bv_page = mempool_alloc(sd_page_pool, GFP_ATOMIC);
880 if (!rq->special_vec.bv_page)
881 return BLK_STS_RESOURCE;
882 clear_highpage(rq->special_vec.bv_page);
883 rq->special_vec.bv_offset = 0;
884 rq->special_vec.bv_len = data_len;
885 rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
886
887 cmd->cmd_len = 16;
888 cmd->cmnd[0] = WRITE_SAME_16;
889 if (unmap)
890 cmd->cmnd[1] = 0x8; /* UNMAP */
891 put_unaligned_be64(lba, &cmd->cmnd[2]);
892 put_unaligned_be32(nr_blocks, &cmd->cmnd[10]);
893
894 cmd->allowed = sdkp->max_retries;
895 cmd->transfersize = data_len;
896 rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT;
897
898 return scsi_alloc_sgtables(cmd);
899}
900
901static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd,
902 bool unmap)
903{
904 struct scsi_device *sdp = cmd->device;
905 struct request *rq = scsi_cmd_to_rq(cmd);
906 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
907 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
908 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
909 u32 data_len = sdp->sector_size;
910
911 rq->special_vec.bv_page = mempool_alloc(sd_page_pool, GFP_ATOMIC);
912 if (!rq->special_vec.bv_page)
913 return BLK_STS_RESOURCE;
914 clear_highpage(rq->special_vec.bv_page);
915 rq->special_vec.bv_offset = 0;
916 rq->special_vec.bv_len = data_len;
917 rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
918
919 cmd->cmd_len = 10;
920 cmd->cmnd[0] = WRITE_SAME;
921 if (unmap)
922 cmd->cmnd[1] = 0x8; /* UNMAP */
923 put_unaligned_be32(lba, &cmd->cmnd[2]);
924 put_unaligned_be16(nr_blocks, &cmd->cmnd[7]);
925
926 cmd->allowed = sdkp->max_retries;
927 cmd->transfersize = data_len;
928 rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT;
929
930 return scsi_alloc_sgtables(cmd);
931}
932
933static blk_status_t sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
934{
935 struct request *rq = scsi_cmd_to_rq(cmd);
936 struct scsi_device *sdp = cmd->device;
937 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
938 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
939 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
940
941 if (!(rq->cmd_flags & REQ_NOUNMAP)) {
942 switch (sdkp->zeroing_mode) {
943 case SD_ZERO_WS16_UNMAP:
944 return sd_setup_write_same16_cmnd(cmd, true);
945 case SD_ZERO_WS10_UNMAP:
946 return sd_setup_write_same10_cmnd(cmd, true);
947 }
948 }
949
950 if (sdp->no_write_same) {
951 rq->rq_flags |= RQF_QUIET;
952 return BLK_STS_TARGET;
953 }
954
955 if (sdkp->ws16 || lba > 0xffffffff || nr_blocks > 0xffff)
956 return sd_setup_write_same16_cmnd(cmd, false);
957
958 return sd_setup_write_same10_cmnd(cmd, false);
959}
960
961static void sd_config_write_same(struct scsi_disk *sdkp)
962{
963 struct request_queue *q = sdkp->disk->queue;
964 unsigned int logical_block_size = sdkp->device->sector_size;
965
966 if (sdkp->device->no_write_same) {
967 sdkp->max_ws_blocks = 0;
968 goto out;
969 }
970
971 /* Some devices can not handle block counts above 0xffff despite
972 * supporting WRITE SAME(16). Consequently we default to 64k
973 * blocks per I/O unless the device explicitly advertises a
974 * bigger limit.
975 */
976 if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
977 sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
978 (u32)SD_MAX_WS16_BLOCKS);
979 else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes)
980 sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
981 (u32)SD_MAX_WS10_BLOCKS);
982 else {
983 sdkp->device->no_write_same = 1;
984 sdkp->max_ws_blocks = 0;
985 }
986
987 if (sdkp->lbprz && sdkp->lbpws)
988 sdkp->zeroing_mode = SD_ZERO_WS16_UNMAP;
989 else if (sdkp->lbprz && sdkp->lbpws10)
990 sdkp->zeroing_mode = SD_ZERO_WS10_UNMAP;
991 else if (sdkp->max_ws_blocks)
992 sdkp->zeroing_mode = SD_ZERO_WS;
993 else
994 sdkp->zeroing_mode = SD_ZERO_WRITE;
995
996 if (sdkp->max_ws_blocks &&
997 sdkp->physical_block_size > logical_block_size) {
998 /*
999 * Reporting a maximum number of blocks that is not aligned
1000 * on the device physical size would cause a large write same
1001 * request to be split into physically unaligned chunks by
1002 * __blkdev_issue_write_zeroes() even if the caller of this
1003 * functions took care to align the large request. So make sure
1004 * the maximum reported is aligned to the device physical block
1005 * size. This is only an optional optimization for regular
1006 * disks, but this is mandatory to avoid failure of large write
1007 * same requests directed at sequential write required zones of
1008 * host-managed ZBC disks.
1009 */
1010 sdkp->max_ws_blocks =
1011 round_down(sdkp->max_ws_blocks,
1012 bytes_to_logical(sdkp->device,
1013 sdkp->physical_block_size));
1014 }
1015
1016out:
1017 blk_queue_max_write_zeroes_sectors(q, sdkp->max_ws_blocks *
1018 (logical_block_size >> 9));
1019}
1020
1021static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
1022{
1023 struct request *rq = scsi_cmd_to_rq(cmd);
1024 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
1025
1026 /* flush requests don't perform I/O, zero the S/G table */
1027 memset(&cmd->sdb, 0, sizeof(cmd->sdb));
1028
1029 if (cmd->device->use_16_for_sync) {
1030 cmd->cmnd[0] = SYNCHRONIZE_CACHE_16;
1031 cmd->cmd_len = 16;
1032 } else {
1033 cmd->cmnd[0] = SYNCHRONIZE_CACHE;
1034 cmd->cmd_len = 10;
1035 }
1036 cmd->transfersize = 0;
1037 cmd->allowed = sdkp->max_retries;
1038
1039 rq->timeout = rq->q->rq_timeout * SD_FLUSH_TIMEOUT_MULTIPLIER;
1040 return BLK_STS_OK;
1041}
1042
1043static blk_status_t sd_setup_rw32_cmnd(struct scsi_cmnd *cmd, bool write,
1044 sector_t lba, unsigned int nr_blocks,
1045 unsigned char flags)
1046{
1047 cmd->cmd_len = SD_EXT_CDB_SIZE;
1048 cmd->cmnd[0] = VARIABLE_LENGTH_CMD;
1049 cmd->cmnd[7] = 0x18; /* Additional CDB len */
1050 cmd->cmnd[9] = write ? WRITE_32 : READ_32;
1051 cmd->cmnd[10] = flags;
1052 put_unaligned_be64(lba, &cmd->cmnd[12]);
1053 put_unaligned_be32(lba, &cmd->cmnd[20]); /* Expected Indirect LBA */
1054 put_unaligned_be32(nr_blocks, &cmd->cmnd[28]);
1055
1056 return BLK_STS_OK;
1057}
1058
1059static blk_status_t sd_setup_rw16_cmnd(struct scsi_cmnd *cmd, bool write,
1060 sector_t lba, unsigned int nr_blocks,
1061 unsigned char flags)
1062{
1063 cmd->cmd_len = 16;
1064 cmd->cmnd[0] = write ? WRITE_16 : READ_16;
1065 cmd->cmnd[1] = flags;
1066 cmd->cmnd[14] = 0;
1067 cmd->cmnd[15] = 0;
1068 put_unaligned_be64(lba, &cmd->cmnd[2]);
1069 put_unaligned_be32(nr_blocks, &cmd->cmnd[10]);
1070
1071 return BLK_STS_OK;
1072}
1073
1074static blk_status_t sd_setup_rw10_cmnd(struct scsi_cmnd *cmd, bool write,
1075 sector_t lba, unsigned int nr_blocks,
1076 unsigned char flags)
1077{
1078 cmd->cmd_len = 10;
1079 cmd->cmnd[0] = write ? WRITE_10 : READ_10;
1080 cmd->cmnd[1] = flags;
1081 cmd->cmnd[6] = 0;
1082 cmd->cmnd[9] = 0;
1083 put_unaligned_be32(lba, &cmd->cmnd[2]);
1084 put_unaligned_be16(nr_blocks, &cmd->cmnd[7]);
1085
1086 return BLK_STS_OK;
1087}
1088
1089static blk_status_t sd_setup_rw6_cmnd(struct scsi_cmnd *cmd, bool write,
1090 sector_t lba, unsigned int nr_blocks,
1091 unsigned char flags)
1092{
1093 /* Avoid that 0 blocks gets translated into 256 blocks. */
1094 if (WARN_ON_ONCE(nr_blocks == 0))
1095 return BLK_STS_IOERR;
1096
1097 if (unlikely(flags & 0x8)) {
1098 /*
1099 * This happens only if this drive failed 10byte rw
1100 * command with ILLEGAL_REQUEST during operation and
1101 * thus turned off use_10_for_rw.
1102 */
1103 scmd_printk(KERN_ERR, cmd, "FUA write on READ/WRITE(6) drive\n");
1104 return BLK_STS_IOERR;
1105 }
1106
1107 cmd->cmd_len = 6;
1108 cmd->cmnd[0] = write ? WRITE_6 : READ_6;
1109 cmd->cmnd[1] = (lba >> 16) & 0x1f;
1110 cmd->cmnd[2] = (lba >> 8) & 0xff;
1111 cmd->cmnd[3] = lba & 0xff;
1112 cmd->cmnd[4] = nr_blocks;
1113 cmd->cmnd[5] = 0;
1114
1115 return BLK_STS_OK;
1116}
1117
1118static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
1119{
1120 struct request *rq = scsi_cmd_to_rq(cmd);
1121 struct scsi_device *sdp = cmd->device;
1122 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
1123 sector_t lba = sectors_to_logical(sdp, blk_rq_pos(rq));
1124 sector_t threshold;
1125 unsigned int nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
1126 unsigned int mask = logical_to_sectors(sdp, 1) - 1;
1127 bool write = rq_data_dir(rq) == WRITE;
1128 unsigned char protect, fua;
1129 blk_status_t ret;
1130 unsigned int dif;
1131 bool dix;
1132
1133 ret = scsi_alloc_sgtables(cmd);
1134 if (ret != BLK_STS_OK)
1135 return ret;
1136
1137 ret = BLK_STS_IOERR;
1138 if (!scsi_device_online(sdp) || sdp->changed) {
1139 scmd_printk(KERN_ERR, cmd, "device offline or changed\n");
1140 goto fail;
1141 }
1142
1143 if (blk_rq_pos(rq) + blk_rq_sectors(rq) > get_capacity(rq->q->disk)) {
1144 scmd_printk(KERN_ERR, cmd, "access beyond end of device\n");
1145 goto fail;
1146 }
1147
1148 if ((blk_rq_pos(rq) & mask) || (blk_rq_sectors(rq) & mask)) {
1149 scmd_printk(KERN_ERR, cmd, "request not aligned to the logical block size\n");
1150 goto fail;
1151 }
1152
1153 /*
1154 * Some SD card readers can't handle accesses which touch the
1155 * last one or two logical blocks. Split accesses as needed.
1156 */
1157 threshold = sdkp->capacity - SD_LAST_BUGGY_SECTORS;
1158
1159 if (unlikely(sdp->last_sector_bug && lba + nr_blocks > threshold)) {
1160 if (lba < threshold) {
1161 /* Access up to the threshold but not beyond */
1162 nr_blocks = threshold - lba;
1163 } else {
1164 /* Access only a single logical block */
1165 nr_blocks = 1;
1166 }
1167 }
1168
1169 if (req_op(rq) == REQ_OP_ZONE_APPEND) {
1170 ret = sd_zbc_prepare_zone_append(cmd, &lba, nr_blocks);
1171 if (ret)
1172 goto fail;
1173 }
1174
1175 fua = rq->cmd_flags & REQ_FUA ? 0x8 : 0;
1176 dix = scsi_prot_sg_count(cmd);
1177 dif = scsi_host_dif_capable(cmd->device->host, sdkp->protection_type);
1178
1179 if (dif || dix)
1180 protect = sd_setup_protect_cmnd(cmd, dix, dif);
1181 else
1182 protect = 0;
1183
1184 if (protect && sdkp->protection_type == T10_PI_TYPE2_PROTECTION) {
1185 ret = sd_setup_rw32_cmnd(cmd, write, lba, nr_blocks,
1186 protect | fua);
1187 } else if (sdp->use_16_for_rw || (nr_blocks > 0xffff)) {
1188 ret = sd_setup_rw16_cmnd(cmd, write, lba, nr_blocks,
1189 protect | fua);
1190 } else if ((nr_blocks > 0xff) || (lba > 0x1fffff) ||
1191 sdp->use_10_for_rw || protect) {
1192 ret = sd_setup_rw10_cmnd(cmd, write, lba, nr_blocks,
1193 protect | fua);
1194 } else {
1195 ret = sd_setup_rw6_cmnd(cmd, write, lba, nr_blocks,
1196 protect | fua);
1197 }
1198
1199 if (unlikely(ret != BLK_STS_OK))
1200 goto fail;
1201
1202 /*
1203 * We shouldn't disconnect in the middle of a sector, so with a dumb
1204 * host adapter, it's safe to assume that we can at least transfer
1205 * this many bytes between each connect / disconnect.
1206 */
1207 cmd->transfersize = sdp->sector_size;
1208 cmd->underflow = nr_blocks << 9;
1209 cmd->allowed = sdkp->max_retries;
1210 cmd->sdb.length = nr_blocks * sdp->sector_size;
1211
1212 SCSI_LOG_HLQUEUE(1,
1213 scmd_printk(KERN_INFO, cmd,
1214 "%s: block=%llu, count=%d\n", __func__,
1215 (unsigned long long)blk_rq_pos(rq),
1216 blk_rq_sectors(rq)));
1217 SCSI_LOG_HLQUEUE(2,
1218 scmd_printk(KERN_INFO, cmd,
1219 "%s %d/%u 512 byte blocks.\n",
1220 write ? "writing" : "reading", nr_blocks,
1221 blk_rq_sectors(rq)));
1222
1223 /*
1224 * This indicates that the command is ready from our end to be queued.
1225 */
1226 return BLK_STS_OK;
1227fail:
1228 scsi_free_sgtables(cmd);
1229 return ret;
1230}
1231
1232static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
1233{
1234 struct request *rq = scsi_cmd_to_rq(cmd);
1235
1236 switch (req_op(rq)) {
1237 case REQ_OP_DISCARD:
1238 switch (scsi_disk(rq->q->disk)->provisioning_mode) {
1239 case SD_LBP_UNMAP:
1240 return sd_setup_unmap_cmnd(cmd);
1241 case SD_LBP_WS16:
1242 return sd_setup_write_same16_cmnd(cmd, true);
1243 case SD_LBP_WS10:
1244 return sd_setup_write_same10_cmnd(cmd, true);
1245 case SD_LBP_ZERO:
1246 return sd_setup_write_same10_cmnd(cmd, false);
1247 default:
1248 return BLK_STS_TARGET;
1249 }
1250 case REQ_OP_WRITE_ZEROES:
1251 return sd_setup_write_zeroes_cmnd(cmd);
1252 case REQ_OP_FLUSH:
1253 return sd_setup_flush_cmnd(cmd);
1254 case REQ_OP_READ:
1255 case REQ_OP_WRITE:
1256 case REQ_OP_ZONE_APPEND:
1257 return sd_setup_read_write_cmnd(cmd);
1258 case REQ_OP_ZONE_RESET:
1259 return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_RESET_WRITE_POINTER,
1260 false);
1261 case REQ_OP_ZONE_RESET_ALL:
1262 return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_RESET_WRITE_POINTER,
1263 true);
1264 case REQ_OP_ZONE_OPEN:
1265 return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_OPEN_ZONE, false);
1266 case REQ_OP_ZONE_CLOSE:
1267 return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_CLOSE_ZONE, false);
1268 case REQ_OP_ZONE_FINISH:
1269 return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_FINISH_ZONE, false);
1270 default:
1271 WARN_ON_ONCE(1);
1272 return BLK_STS_NOTSUPP;
1273 }
1274}
1275
1276static void sd_uninit_command(struct scsi_cmnd *SCpnt)
1277{
1278 struct request *rq = scsi_cmd_to_rq(SCpnt);
1279
1280 if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
1281 mempool_free(rq->special_vec.bv_page, sd_page_pool);
1282}
1283
1284static bool sd_need_revalidate(struct block_device *bdev,
1285 struct scsi_disk *sdkp)
1286{
1287 if (sdkp->device->removable || sdkp->write_prot) {
1288 if (bdev_check_media_change(bdev))
1289 return true;
1290 }
1291
1292 /*
1293 * Force a full rescan after ioctl(BLKRRPART). While the disk state has
1294 * nothing to do with partitions, BLKRRPART is used to force a full
1295 * revalidate after things like a format for historical reasons.
1296 */
1297 return test_bit(GD_NEED_PART_SCAN, &bdev->bd_disk->state);
1298}
1299
1300/**
1301 * sd_open - open a scsi disk device
1302 * @bdev: Block device of the scsi disk to open
1303 * @mode: FMODE_* mask
1304 *
1305 * Returns 0 if successful. Returns a negated errno value in case
1306 * of error.
1307 *
1308 * Note: This can be called from a user context (e.g. fsck(1) )
1309 * or from within the kernel (e.g. as a result of a mount(1) ).
1310 * In the latter case @inode and @filp carry an abridged amount
1311 * of information as noted above.
1312 *
1313 * Locking: called with bdev->bd_disk->open_mutex held.
1314 **/
1315static int sd_open(struct block_device *bdev, fmode_t mode)
1316{
1317 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1318 struct scsi_device *sdev = sdkp->device;
1319 int retval;
1320
1321 if (scsi_device_get(sdev))
1322 return -ENXIO;
1323
1324 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
1325
1326 /*
1327 * If the device is in error recovery, wait until it is done.
1328 * If the device is offline, then disallow any access to it.
1329 */
1330 retval = -ENXIO;
1331 if (!scsi_block_when_processing_errors(sdev))
1332 goto error_out;
1333
1334 if (sd_need_revalidate(bdev, sdkp))
1335 sd_revalidate_disk(bdev->bd_disk);
1336
1337 /*
1338 * If the drive is empty, just let the open fail.
1339 */
1340 retval = -ENOMEDIUM;
1341 if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY))
1342 goto error_out;
1343
1344 /*
1345 * If the device has the write protect tab set, have the open fail
1346 * if the user expects to be able to write to the thing.
1347 */
1348 retval = -EROFS;
1349 if (sdkp->write_prot && (mode & FMODE_WRITE))
1350 goto error_out;
1351
1352 /*
1353 * It is possible that the disk changing stuff resulted in
1354 * the device being taken offline. If this is the case,
1355 * report this to the user, and don't pretend that the
1356 * open actually succeeded.
1357 */
1358 retval = -ENXIO;
1359 if (!scsi_device_online(sdev))
1360 goto error_out;
1361
1362 if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
1363 if (scsi_block_when_processing_errors(sdev))
1364 scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
1365 }
1366
1367 return 0;
1368
1369error_out:
1370 scsi_device_put(sdev);
1371 return retval;
1372}
1373
1374/**
1375 * sd_release - invoked when the (last) close(2) is called on this
1376 * scsi disk.
1377 * @disk: disk to release
1378 * @mode: FMODE_* mask
1379 *
1380 * Returns 0.
1381 *
1382 * Note: may block (uninterruptible) if error recovery is underway
1383 * on this disk.
1384 *
1385 * Locking: called with bdev->bd_disk->open_mutex held.
1386 **/
1387static void sd_release(struct gendisk *disk, fmode_t mode)
1388{
1389 struct scsi_disk *sdkp = scsi_disk(disk);
1390 struct scsi_device *sdev = sdkp->device;
1391
1392 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
1393
1394 if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) {
1395 if (scsi_block_when_processing_errors(sdev))
1396 scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
1397 }
1398
1399 scsi_device_put(sdev);
1400}
1401
1402static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1403{
1404 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1405 struct scsi_device *sdp = sdkp->device;
1406 struct Scsi_Host *host = sdp->host;
1407 sector_t capacity = logical_to_sectors(sdp, sdkp->capacity);
1408 int diskinfo[4];
1409
1410 /* default to most commonly used values */
1411 diskinfo[0] = 0x40; /* 1 << 6 */
1412 diskinfo[1] = 0x20; /* 1 << 5 */
1413 diskinfo[2] = capacity >> 11;
1414
1415 /* override with calculated, extended default, or driver values */
1416 if (host->hostt->bios_param)
1417 host->hostt->bios_param(sdp, bdev, capacity, diskinfo);
1418 else
1419 scsicam_bios_param(bdev, capacity, diskinfo);
1420
1421 geo->heads = diskinfo[0];
1422 geo->sectors = diskinfo[1];
1423 geo->cylinders = diskinfo[2];
1424 return 0;
1425}
1426
1427/**
1428 * sd_ioctl - process an ioctl
1429 * @bdev: target block device
1430 * @mode: FMODE_* mask
1431 * @cmd: ioctl command number
1432 * @arg: this is third argument given to ioctl(2) system call.
1433 * Often contains a pointer.
1434 *
1435 * Returns 0 if successful (some ioctls return positive numbers on
1436 * success as well). Returns a negated errno value in case of error.
1437 *
1438 * Note: most ioctls are forward onto the block subsystem or further
1439 * down in the scsi subsystem.
1440 **/
1441static int sd_ioctl(struct block_device *bdev, fmode_t mode,
1442 unsigned int cmd, unsigned long arg)
1443{
1444 struct gendisk *disk = bdev->bd_disk;
1445 struct scsi_disk *sdkp = scsi_disk(disk);
1446 struct scsi_device *sdp = sdkp->device;
1447 void __user *p = (void __user *)arg;
1448 int error;
1449
1450 SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, "
1451 "cmd=0x%x\n", disk->disk_name, cmd));
1452
1453 if (bdev_is_partition(bdev) && !capable(CAP_SYS_RAWIO))
1454 return -ENOIOCTLCMD;
1455
1456 /*
1457 * If we are in the middle of error recovery, don't let anyone
1458 * else try and use this device. Also, if error recovery fails, it
1459 * may try and take the device offline, in which case all further
1460 * access to the device is prohibited.
1461 */
1462 error = scsi_ioctl_block_when_processing_errors(sdp, cmd,
1463 (mode & FMODE_NDELAY) != 0);
1464 if (error)
1465 return error;
1466
1467 if (is_sed_ioctl(cmd))
1468 return sed_ioctl(sdkp->opal_dev, cmd, p);
1469 return scsi_ioctl(sdp, mode, cmd, p);
1470}
1471
1472static void set_media_not_present(struct scsi_disk *sdkp)
1473{
1474 if (sdkp->media_present)
1475 sdkp->device->changed = 1;
1476
1477 if (sdkp->device->removable) {
1478 sdkp->media_present = 0;
1479 sdkp->capacity = 0;
1480 }
1481}
1482
1483static int media_not_present(struct scsi_disk *sdkp,
1484 struct scsi_sense_hdr *sshdr)
1485{
1486 if (!scsi_sense_valid(sshdr))
1487 return 0;
1488
1489 /* not invoked for commands that could return deferred errors */
1490 switch (sshdr->sense_key) {
1491 case UNIT_ATTENTION:
1492 case NOT_READY:
1493 /* medium not present */
1494 if (sshdr->asc == 0x3A) {
1495 set_media_not_present(sdkp);
1496 return 1;
1497 }
1498 }
1499 return 0;
1500}
1501
1502/**
1503 * sd_check_events - check media events
1504 * @disk: kernel device descriptor
1505 * @clearing: disk events currently being cleared
1506 *
1507 * Returns mask of DISK_EVENT_*.
1508 *
1509 * Note: this function is invoked from the block subsystem.
1510 **/
1511static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
1512{
1513 struct scsi_disk *sdkp = disk->private_data;
1514 struct scsi_device *sdp;
1515 int retval;
1516 bool disk_changed;
1517
1518 if (!sdkp)
1519 return 0;
1520
1521 sdp = sdkp->device;
1522 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
1523
1524 /*
1525 * If the device is offline, don't send any commands - just pretend as
1526 * if the command failed. If the device ever comes back online, we
1527 * can deal with it then. It is only because of unrecoverable errors
1528 * that we would ever take a device offline in the first place.
1529 */
1530 if (!scsi_device_online(sdp)) {
1531 set_media_not_present(sdkp);
1532 goto out;
1533 }
1534
1535 /*
1536 * Using TEST_UNIT_READY enables differentiation between drive with
1537 * no cartridge loaded - NOT READY, drive with changed cartridge -
1538 * UNIT ATTENTION, or with same cartridge - GOOD STATUS.
1539 *
1540 * Drives that auto spin down. eg iomega jaz 1G, will be started
1541 * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
1542 * sd_revalidate() is called.
1543 */
1544 if (scsi_block_when_processing_errors(sdp)) {
1545 struct scsi_sense_hdr sshdr = { 0, };
1546
1547 retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, sdkp->max_retries,
1548 &sshdr);
1549
1550 /* failed to execute TUR, assume media not present */
1551 if (retval < 0 || host_byte(retval)) {
1552 set_media_not_present(sdkp);
1553 goto out;
1554 }
1555
1556 if (media_not_present(sdkp, &sshdr))
1557 goto out;
1558 }
1559
1560 /*
1561 * For removable scsi disk we have to recognise the presence
1562 * of a disk in the drive.
1563 */
1564 if (!sdkp->media_present)
1565 sdp->changed = 1;
1566 sdkp->media_present = 1;
1567out:
1568 /*
1569 * sdp->changed is set under the following conditions:
1570 *
1571 * Medium present state has changed in either direction.
1572 * Device has indicated UNIT_ATTENTION.
1573 */
1574 disk_changed = sdp->changed;
1575 sdp->changed = 0;
1576 return disk_changed ? DISK_EVENT_MEDIA_CHANGE : 0;
1577}
1578
1579static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
1580{
1581 int retries, res;
1582 struct scsi_device *sdp = sdkp->device;
1583 const int timeout = sdp->request_queue->rq_timeout
1584 * SD_FLUSH_TIMEOUT_MULTIPLIER;
1585 struct scsi_sense_hdr my_sshdr;
1586
1587 if (!scsi_device_online(sdp))
1588 return -ENODEV;
1589
1590 /* caller might not be interested in sense, but we need it */
1591 if (!sshdr)
1592 sshdr = &my_sshdr;
1593
1594 for (retries = 3; retries > 0; --retries) {
1595 unsigned char cmd[16] = { 0 };
1596
1597 if (sdp->use_16_for_sync)
1598 cmd[0] = SYNCHRONIZE_CACHE_16;
1599 else
1600 cmd[0] = SYNCHRONIZE_CACHE;
1601 /*
1602 * Leave the rest of the command zero to indicate
1603 * flush everything.
1604 */
1605 res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, sshdr,
1606 timeout, sdkp->max_retries, 0, RQF_PM, NULL);
1607 if (res == 0)
1608 break;
1609 }
1610
1611 if (res) {
1612 sd_print_result(sdkp, "Synchronize Cache(10) failed", res);
1613
1614 if (res < 0)
1615 return res;
1616
1617 if (scsi_status_is_check_condition(res) &&
1618 scsi_sense_valid(sshdr)) {
1619 sd_print_sense_hdr(sdkp, sshdr);
1620
1621 /* we need to evaluate the error return */
1622 if (sshdr->asc == 0x3a || /* medium not present */
1623 sshdr->asc == 0x20 || /* invalid command */
1624 (sshdr->asc == 0x74 && sshdr->ascq == 0x71)) /* drive is password locked */
1625 /* this is no error here */
1626 return 0;
1627 }
1628
1629 switch (host_byte(res)) {
1630 /* ignore errors due to racing a disconnection */
1631 case DID_BAD_TARGET:
1632 case DID_NO_CONNECT:
1633 return 0;
1634 /* signal the upper layer it might try again */
1635 case DID_BUS_BUSY:
1636 case DID_IMM_RETRY:
1637 case DID_REQUEUE:
1638 case DID_SOFT_ERROR:
1639 return -EBUSY;
1640 default:
1641 return -EIO;
1642 }
1643 }
1644 return 0;
1645}
1646
1647static void sd_rescan(struct device *dev)
1648{
1649 struct scsi_disk *sdkp = dev_get_drvdata(dev);
1650
1651 sd_revalidate_disk(sdkp->disk);
1652}
1653
1654static int sd_get_unique_id(struct gendisk *disk, u8 id[16],
1655 enum blk_unique_id type)
1656{
1657 struct scsi_device *sdev = scsi_disk(disk)->device;
1658 const struct scsi_vpd *vpd;
1659 const unsigned char *d;
1660 int ret = -ENXIO, len;
1661
1662 rcu_read_lock();
1663 vpd = rcu_dereference(sdev->vpd_pg83);
1664 if (!vpd)
1665 goto out_unlock;
1666
1667 ret = -EINVAL;
1668 for (d = vpd->data + 4; d < vpd->data + vpd->len; d += d[3] + 4) {
1669 /* we only care about designators with LU association */
1670 if (((d[1] >> 4) & 0x3) != 0x00)
1671 continue;
1672 if ((d[1] & 0xf) != type)
1673 continue;
1674
1675 /*
1676 * Only exit early if a 16-byte descriptor was found. Otherwise
1677 * keep looking as one with more entropy might still show up.
1678 */
1679 len = d[3];
1680 if (len != 8 && len != 12 && len != 16)
1681 continue;
1682 ret = len;
1683 memcpy(id, d + 4, len);
1684 if (len == 16)
1685 break;
1686 }
1687out_unlock:
1688 rcu_read_unlock();
1689 return ret;
1690}
1691
1692static char sd_pr_type(enum pr_type type)
1693{
1694 switch (type) {
1695 case PR_WRITE_EXCLUSIVE:
1696 return 0x01;
1697 case PR_EXCLUSIVE_ACCESS:
1698 return 0x03;
1699 case PR_WRITE_EXCLUSIVE_REG_ONLY:
1700 return 0x05;
1701 case PR_EXCLUSIVE_ACCESS_REG_ONLY:
1702 return 0x06;
1703 case PR_WRITE_EXCLUSIVE_ALL_REGS:
1704 return 0x07;
1705 case PR_EXCLUSIVE_ACCESS_ALL_REGS:
1706 return 0x08;
1707 default:
1708 return 0;
1709 }
1710};
1711
1712static int sd_scsi_to_pr_err(struct scsi_sense_hdr *sshdr, int result)
1713{
1714 switch (host_byte(result)) {
1715 case DID_TRANSPORT_MARGINAL:
1716 case DID_TRANSPORT_DISRUPTED:
1717 case DID_BUS_BUSY:
1718 return PR_STS_RETRY_PATH_FAILURE;
1719 case DID_NO_CONNECT:
1720 return PR_STS_PATH_FAILED;
1721 case DID_TRANSPORT_FAILFAST:
1722 return PR_STS_PATH_FAST_FAILED;
1723 }
1724
1725 switch (status_byte(result)) {
1726 case SAM_STAT_RESERVATION_CONFLICT:
1727 return PR_STS_RESERVATION_CONFLICT;
1728 case SAM_STAT_CHECK_CONDITION:
1729 if (!scsi_sense_valid(sshdr))
1730 return PR_STS_IOERR;
1731
1732 if (sshdr->sense_key == ILLEGAL_REQUEST &&
1733 (sshdr->asc == 0x26 || sshdr->asc == 0x24))
1734 return -EINVAL;
1735
1736 fallthrough;
1737 default:
1738 return PR_STS_IOERR;
1739 }
1740}
1741
1742static int sd_pr_command(struct block_device *bdev, u8 sa,
1743 u64 key, u64 sa_key, u8 type, u8 flags)
1744{
1745 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1746 struct scsi_device *sdev = sdkp->device;
1747 struct scsi_sense_hdr sshdr;
1748 int result;
1749 u8 cmd[16] = { 0, };
1750 u8 data[24] = { 0, };
1751
1752 cmd[0] = PERSISTENT_RESERVE_OUT;
1753 cmd[1] = sa;
1754 cmd[2] = type;
1755 put_unaligned_be32(sizeof(data), &cmd[5]);
1756
1757 put_unaligned_be64(key, &data[0]);
1758 put_unaligned_be64(sa_key, &data[8]);
1759 data[20] = flags;
1760
1761 result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, &data, sizeof(data),
1762 &sshdr, SD_TIMEOUT, sdkp->max_retries, NULL);
1763
1764 if (scsi_status_is_check_condition(result) &&
1765 scsi_sense_valid(&sshdr)) {
1766 sdev_printk(KERN_INFO, sdev, "PR command failed: %d\n", result);
1767 scsi_print_sense_hdr(sdev, NULL, &sshdr);
1768 }
1769
1770 if (result <= 0)
1771 return result;
1772
1773 return sd_scsi_to_pr_err(&sshdr, result);
1774}
1775
1776static int sd_pr_register(struct block_device *bdev, u64 old_key, u64 new_key,
1777 u32 flags)
1778{
1779 if (flags & ~PR_FL_IGNORE_KEY)
1780 return -EOPNOTSUPP;
1781 return sd_pr_command(bdev, (flags & PR_FL_IGNORE_KEY) ? 0x06 : 0x00,
1782 old_key, new_key, 0,
1783 (1 << 0) /* APTPL */);
1784}
1785
1786static int sd_pr_reserve(struct block_device *bdev, u64 key, enum pr_type type,
1787 u32 flags)
1788{
1789 if (flags)
1790 return -EOPNOTSUPP;
1791 return sd_pr_command(bdev, 0x01, key, 0, sd_pr_type(type), 0);
1792}
1793
1794static int sd_pr_release(struct block_device *bdev, u64 key, enum pr_type type)
1795{
1796 return sd_pr_command(bdev, 0x02, key, 0, sd_pr_type(type), 0);
1797}
1798
1799static int sd_pr_preempt(struct block_device *bdev, u64 old_key, u64 new_key,
1800 enum pr_type type, bool abort)
1801{
1802 return sd_pr_command(bdev, abort ? 0x05 : 0x04, old_key, new_key,
1803 sd_pr_type(type), 0);
1804}
1805
1806static int sd_pr_clear(struct block_device *bdev, u64 key)
1807{
1808 return sd_pr_command(bdev, 0x03, key, 0, 0, 0);
1809}
1810
1811static const struct pr_ops sd_pr_ops = {
1812 .pr_register = sd_pr_register,
1813 .pr_reserve = sd_pr_reserve,
1814 .pr_release = sd_pr_release,
1815 .pr_preempt = sd_pr_preempt,
1816 .pr_clear = sd_pr_clear,
1817};
1818
1819static void scsi_disk_free_disk(struct gendisk *disk)
1820{
1821 struct scsi_disk *sdkp = scsi_disk(disk);
1822
1823 put_device(&sdkp->disk_dev);
1824}
1825
1826static const struct block_device_operations sd_fops = {
1827 .owner = THIS_MODULE,
1828 .open = sd_open,
1829 .release = sd_release,
1830 .ioctl = sd_ioctl,
1831 .getgeo = sd_getgeo,
1832 .compat_ioctl = blkdev_compat_ptr_ioctl,
1833 .check_events = sd_check_events,
1834 .unlock_native_capacity = sd_unlock_native_capacity,
1835 .report_zones = sd_zbc_report_zones,
1836 .get_unique_id = sd_get_unique_id,
1837 .free_disk = scsi_disk_free_disk,
1838 .pr_ops = &sd_pr_ops,
1839};
1840
1841/**
1842 * sd_eh_reset - reset error handling callback
1843 * @scmd: sd-issued command that has failed
1844 *
1845 * This function is called by the SCSI midlayer before starting
1846 * SCSI EH. When counting medium access failures we have to be
1847 * careful to register it only only once per device and SCSI EH run;
1848 * there might be several timed out commands which will cause the
1849 * 'max_medium_access_timeouts' counter to trigger after the first
1850 * SCSI EH run already and set the device to offline.
1851 * So this function resets the internal counter before starting SCSI EH.
1852 **/
1853static void sd_eh_reset(struct scsi_cmnd *scmd)
1854{
1855 struct scsi_disk *sdkp = scsi_disk(scsi_cmd_to_rq(scmd)->q->disk);
1856
1857 /* New SCSI EH run, reset gate variable */
1858 sdkp->ignore_medium_access_errors = false;
1859}
1860
1861/**
1862 * sd_eh_action - error handling callback
1863 * @scmd: sd-issued command that has failed
1864 * @eh_disp: The recovery disposition suggested by the midlayer
1865 *
1866 * This function is called by the SCSI midlayer upon completion of an
1867 * error test command (currently TEST UNIT READY). The result of sending
1868 * the eh command is passed in eh_disp. We're looking for devices that
1869 * fail medium access commands but are OK with non access commands like
1870 * test unit ready (so wrongly see the device as having a successful
1871 * recovery)
1872 **/
1873static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
1874{
1875 struct scsi_disk *sdkp = scsi_disk(scsi_cmd_to_rq(scmd)->q->disk);
1876 struct scsi_device *sdev = scmd->device;
1877
1878 if (!scsi_device_online(sdev) ||
1879 !scsi_medium_access_command(scmd) ||
1880 host_byte(scmd->result) != DID_TIME_OUT ||
1881 eh_disp != SUCCESS)
1882 return eh_disp;
1883
1884 /*
1885 * The device has timed out executing a medium access command.
1886 * However, the TEST UNIT READY command sent during error
1887 * handling completed successfully. Either the device is in the
1888 * process of recovering or has it suffered an internal failure
1889 * that prevents access to the storage medium.
1890 */
1891 if (!sdkp->ignore_medium_access_errors) {
1892 sdkp->medium_access_timed_out++;
1893 sdkp->ignore_medium_access_errors = true;
1894 }
1895
1896 /*
1897 * If the device keeps failing read/write commands but TEST UNIT
1898 * READY always completes successfully we assume that medium
1899 * access is no longer possible and take the device offline.
1900 */
1901 if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) {
1902 scmd_printk(KERN_ERR, scmd,
1903 "Medium access timeout failure. Offlining disk!\n");
1904 mutex_lock(&sdev->state_mutex);
1905 scsi_device_set_state(sdev, SDEV_OFFLINE);
1906 mutex_unlock(&sdev->state_mutex);
1907
1908 return SUCCESS;
1909 }
1910
1911 return eh_disp;
1912}
1913
1914static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
1915{
1916 struct request *req = scsi_cmd_to_rq(scmd);
1917 struct scsi_device *sdev = scmd->device;
1918 unsigned int transferred, good_bytes;
1919 u64 start_lba, end_lba, bad_lba;
1920
1921 /*
1922 * Some commands have a payload smaller than the device logical
1923 * block size (e.g. INQUIRY on a 4K disk).
1924 */
1925 if (scsi_bufflen(scmd) <= sdev->sector_size)
1926 return 0;
1927
1928 /* Check if we have a 'bad_lba' information */
1929 if (!scsi_get_sense_info_fld(scmd->sense_buffer,
1930 SCSI_SENSE_BUFFERSIZE,
1931 &bad_lba))
1932 return 0;
1933
1934 /*
1935 * If the bad lba was reported incorrectly, we have no idea where
1936 * the error is.
1937 */
1938 start_lba = sectors_to_logical(sdev, blk_rq_pos(req));
1939 end_lba = start_lba + bytes_to_logical(sdev, scsi_bufflen(scmd));
1940 if (bad_lba < start_lba || bad_lba >= end_lba)
1941 return 0;
1942
1943 /*
1944 * resid is optional but mostly filled in. When it's unused,
1945 * its value is zero, so we assume the whole buffer transferred
1946 */
1947 transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
1948
1949 /* This computation should always be done in terms of the
1950 * resolution of the device's medium.
1951 */
1952 good_bytes = logical_to_bytes(sdev, bad_lba - start_lba);
1953
1954 return min(good_bytes, transferred);
1955}
1956
1957/**
1958 * sd_done - bottom half handler: called when the lower level
1959 * driver has completed (successfully or otherwise) a scsi command.
1960 * @SCpnt: mid-level's per command structure.
1961 *
1962 * Note: potentially run from within an ISR. Must not block.
1963 **/
1964static int sd_done(struct scsi_cmnd *SCpnt)
1965{
1966 int result = SCpnt->result;
1967 unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
1968 unsigned int sector_size = SCpnt->device->sector_size;
1969 unsigned int resid;
1970 struct scsi_sense_hdr sshdr;
1971 struct request *req = scsi_cmd_to_rq(SCpnt);
1972 struct scsi_disk *sdkp = scsi_disk(req->q->disk);
1973 int sense_valid = 0;
1974 int sense_deferred = 0;
1975
1976 switch (req_op(req)) {
1977 case REQ_OP_DISCARD:
1978 case REQ_OP_WRITE_ZEROES:
1979 case REQ_OP_ZONE_RESET:
1980 case REQ_OP_ZONE_RESET_ALL:
1981 case REQ_OP_ZONE_OPEN:
1982 case REQ_OP_ZONE_CLOSE:
1983 case REQ_OP_ZONE_FINISH:
1984 if (!result) {
1985 good_bytes = blk_rq_bytes(req);
1986 scsi_set_resid(SCpnt, 0);
1987 } else {
1988 good_bytes = 0;
1989 scsi_set_resid(SCpnt, blk_rq_bytes(req));
1990 }
1991 break;
1992 default:
1993 /*
1994 * In case of bogus fw or device, we could end up having
1995 * an unaligned partial completion. Check this here and force
1996 * alignment.
1997 */
1998 resid = scsi_get_resid(SCpnt);
1999 if (resid & (sector_size - 1)) {
2000 sd_printk(KERN_INFO, sdkp,
2001 "Unaligned partial completion (resid=%u, sector_sz=%u)\n",
2002 resid, sector_size);
2003 scsi_print_command(SCpnt);
2004 resid = min(scsi_bufflen(SCpnt),
2005 round_up(resid, sector_size));
2006 scsi_set_resid(SCpnt, resid);
2007 }
2008 }
2009
2010 if (result) {
2011 sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
2012 if (sense_valid)
2013 sense_deferred = scsi_sense_is_deferred(&sshdr);
2014 }
2015 sdkp->medium_access_timed_out = 0;
2016
2017 if (!scsi_status_is_check_condition(result) &&
2018 (!sense_valid || sense_deferred))
2019 goto out;
2020
2021 switch (sshdr.sense_key) {
2022 case HARDWARE_ERROR:
2023 case MEDIUM_ERROR:
2024 good_bytes = sd_completed_bytes(SCpnt);
2025 break;
2026 case RECOVERED_ERROR:
2027 good_bytes = scsi_bufflen(SCpnt);
2028 break;
2029 case NO_SENSE:
2030 /* This indicates a false check condition, so ignore it. An
2031 * unknown amount of data was transferred so treat it as an
2032 * error.
2033 */
2034 SCpnt->result = 0;
2035 memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
2036 break;
2037 case ABORTED_COMMAND:
2038 if (sshdr.asc == 0x10) /* DIF: Target detected corruption */
2039 good_bytes = sd_completed_bytes(SCpnt);
2040 break;
2041 case ILLEGAL_REQUEST:
2042 switch (sshdr.asc) {
2043 case 0x10: /* DIX: Host detected corruption */
2044 good_bytes = sd_completed_bytes(SCpnt);
2045 break;
2046 case 0x20: /* INVALID COMMAND OPCODE */
2047 case 0x24: /* INVALID FIELD IN CDB */
2048 switch (SCpnt->cmnd[0]) {
2049 case UNMAP:
2050 sd_config_discard(sdkp, SD_LBP_DISABLE);
2051 break;
2052 case WRITE_SAME_16:
2053 case WRITE_SAME:
2054 if (SCpnt->cmnd[1] & 8) { /* UNMAP */
2055 sd_config_discard(sdkp, SD_LBP_DISABLE);
2056 } else {
2057 sdkp->device->no_write_same = 1;
2058 sd_config_write_same(sdkp);
2059 req->rq_flags |= RQF_QUIET;
2060 }
2061 break;
2062 }
2063 }
2064 break;
2065 default:
2066 break;
2067 }
2068
2069 out:
2070 if (sd_is_zoned(sdkp))
2071 good_bytes = sd_zbc_complete(SCpnt, good_bytes, &sshdr);
2072
2073 SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
2074 "sd_done: completed %d of %d bytes\n",
2075 good_bytes, scsi_bufflen(SCpnt)));
2076
2077 return good_bytes;
2078}
2079
2080/*
2081 * spinup disk - called only in sd_revalidate_disk()
2082 */
2083static void
2084sd_spinup_disk(struct scsi_disk *sdkp)
2085{
2086 unsigned char cmd[10];
2087 unsigned long spintime_expire = 0;
2088 int retries, spintime;
2089 unsigned int the_result;
2090 struct scsi_sense_hdr sshdr;
2091 int sense_valid = 0;
2092
2093 spintime = 0;
2094
2095 /* Spin up drives, as required. Only do this at boot time */
2096 /* Spinup needs to be done for module loads too. */
2097 do {
2098 retries = 0;
2099
2100 do {
2101 bool media_was_present = sdkp->media_present;
2102
2103 cmd[0] = TEST_UNIT_READY;
2104 memset((void *) &cmd[1], 0, 9);
2105
2106 the_result = scsi_execute_req(sdkp->device, cmd,
2107 DMA_NONE, NULL, 0,
2108 &sshdr, SD_TIMEOUT,
2109 sdkp->max_retries, NULL);
2110
2111 /*
2112 * If the drive has indicated to us that it
2113 * doesn't have any media in it, don't bother
2114 * with any more polling.
2115 */
2116 if (media_not_present(sdkp, &sshdr)) {
2117 if (media_was_present)
2118 sd_printk(KERN_NOTICE, sdkp, "Media removed, stopped polling\n");
2119 return;
2120 }
2121
2122 if (the_result)
2123 sense_valid = scsi_sense_valid(&sshdr);
2124 retries++;
2125 } while (retries < 3 &&
2126 (!scsi_status_is_good(the_result) ||
2127 (scsi_status_is_check_condition(the_result) &&
2128 sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
2129
2130 if (!scsi_status_is_check_condition(the_result)) {
2131 /* no sense, TUR either succeeded or failed
2132 * with a status error */
2133 if(!spintime && !scsi_status_is_good(the_result)) {
2134 sd_print_result(sdkp, "Test Unit Ready failed",
2135 the_result);
2136 }
2137 break;
2138 }
2139
2140 /*
2141 * The device does not want the automatic start to be issued.
2142 */
2143 if (sdkp->device->no_start_on_add)
2144 break;
2145
2146 if (sense_valid && sshdr.sense_key == NOT_READY) {
2147 if (sshdr.asc == 4 && sshdr.ascq == 3)
2148 break; /* manual intervention required */
2149 if (sshdr.asc == 4 && sshdr.ascq == 0xb)
2150 break; /* standby */
2151 if (sshdr.asc == 4 && sshdr.ascq == 0xc)
2152 break; /* unavailable */
2153 if (sshdr.asc == 4 && sshdr.ascq == 0x1b)
2154 break; /* sanitize in progress */
2155 /*
2156 * Issue command to spin up drive when not ready
2157 */
2158 if (!spintime) {
2159 sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
2160 cmd[0] = START_STOP;
2161 cmd[1] = 1; /* Return immediately */
2162 memset((void *) &cmd[2], 0, 8);
2163 cmd[4] = 1; /* Start spin cycle */
2164 if (sdkp->device->start_stop_pwr_cond)
2165 cmd[4] |= 1 << 4;
2166 scsi_execute_req(sdkp->device, cmd, DMA_NONE,
2167 NULL, 0, &sshdr,
2168 SD_TIMEOUT, sdkp->max_retries,
2169 NULL);
2170 spintime_expire = jiffies + 100 * HZ;
2171 spintime = 1;
2172 }
2173 /* Wait 1 second for next try */
2174 msleep(1000);
2175 printk(KERN_CONT ".");
2176
2177 /*
2178 * Wait for USB flash devices with slow firmware.
2179 * Yes, this sense key/ASC combination shouldn't
2180 * occur here. It's characteristic of these devices.
2181 */
2182 } else if (sense_valid &&
2183 sshdr.sense_key == UNIT_ATTENTION &&
2184 sshdr.asc == 0x28) {
2185 if (!spintime) {
2186 spintime_expire = jiffies + 5 * HZ;
2187 spintime = 1;
2188 }
2189 /* Wait 1 second for next try */
2190 msleep(1000);
2191 } else {
2192 /* we don't understand the sense code, so it's
2193 * probably pointless to loop */
2194 if(!spintime) {
2195 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
2196 sd_print_sense_hdr(sdkp, &sshdr);
2197 }
2198 break;
2199 }
2200
2201 } while (spintime && time_before_eq(jiffies, spintime_expire));
2202
2203 if (spintime) {
2204 if (scsi_status_is_good(the_result))
2205 printk(KERN_CONT "ready\n");
2206 else
2207 printk(KERN_CONT "not responding...\n");
2208 }
2209}
2210
2211/*
2212 * Determine whether disk supports Data Integrity Field.
2213 */
2214static int sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
2215{
2216 struct scsi_device *sdp = sdkp->device;
2217 u8 type;
2218
2219 if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0) {
2220 sdkp->protection_type = 0;
2221 return 0;
2222 }
2223
2224 type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
2225
2226 if (type > T10_PI_TYPE3_PROTECTION) {
2227 sd_printk(KERN_ERR, sdkp, "formatted with unsupported" \
2228 " protection type %u. Disabling disk!\n",
2229 type);
2230 sdkp->protection_type = 0;
2231 return -ENODEV;
2232 }
2233
2234 sdkp->protection_type = type;
2235
2236 return 0;
2237}
2238
2239static void sd_config_protection(struct scsi_disk *sdkp)
2240{
2241 struct scsi_device *sdp = sdkp->device;
2242
2243 if (!sdkp->first_scan)
2244 return;
2245
2246 sd_dif_config_host(sdkp);
2247
2248 if (!sdkp->protection_type)
2249 return;
2250
2251 if (!scsi_host_dif_capable(sdp->host, sdkp->protection_type)) {
2252 sd_printk(KERN_NOTICE, sdkp,
2253 "Disabling DIF Type %u protection\n",
2254 sdkp->protection_type);
2255 sdkp->protection_type = 0;
2256 }
2257
2258 sd_printk(KERN_NOTICE, sdkp, "Enabling DIF Type %u protection\n",
2259 sdkp->protection_type);
2260}
2261
2262static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
2263 struct scsi_sense_hdr *sshdr, int sense_valid,
2264 int the_result)
2265{
2266 if (sense_valid)
2267 sd_print_sense_hdr(sdkp, sshdr);
2268 else
2269 sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
2270
2271 /*
2272 * Set dirty bit for removable devices if not ready -
2273 * sometimes drives will not report this properly.
2274 */
2275 if (sdp->removable &&
2276 sense_valid && sshdr->sense_key == NOT_READY)
2277 set_media_not_present(sdkp);
2278
2279 /*
2280 * We used to set media_present to 0 here to indicate no media
2281 * in the drive, but some drives fail read capacity even with
2282 * media present, so we can't do that.
2283 */
2284 sdkp->capacity = 0; /* unknown mapped to zero - as usual */
2285}
2286
2287#define RC16_LEN 32
2288#if RC16_LEN > SD_BUF_SIZE
2289#error RC16_LEN must not be more than SD_BUF_SIZE
2290#endif
2291
2292#define READ_CAPACITY_RETRIES_ON_RESET 10
2293
2294static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
2295 unsigned char *buffer)
2296{
2297 unsigned char cmd[16];
2298 struct scsi_sense_hdr sshdr;
2299 int sense_valid = 0;
2300 int the_result;
2301 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
2302 unsigned int alignment;
2303 unsigned long long lba;
2304 unsigned sector_size;
2305
2306 if (sdp->no_read_capacity_16)
2307 return -EINVAL;
2308
2309 do {
2310 memset(cmd, 0, 16);
2311 cmd[0] = SERVICE_ACTION_IN_16;
2312 cmd[1] = SAI_READ_CAPACITY_16;
2313 cmd[13] = RC16_LEN;
2314 memset(buffer, 0, RC16_LEN);
2315
2316 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
2317 buffer, RC16_LEN, &sshdr,
2318 SD_TIMEOUT, sdkp->max_retries, NULL);
2319
2320 if (media_not_present(sdkp, &sshdr))
2321 return -ENODEV;
2322
2323 if (the_result > 0) {
2324 sense_valid = scsi_sense_valid(&sshdr);
2325 if (sense_valid &&
2326 sshdr.sense_key == ILLEGAL_REQUEST &&
2327 (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
2328 sshdr.ascq == 0x00)
2329 /* Invalid Command Operation Code or
2330 * Invalid Field in CDB, just retry
2331 * silently with RC10 */
2332 return -EINVAL;
2333 if (sense_valid &&
2334 sshdr.sense_key == UNIT_ATTENTION &&
2335 sshdr.asc == 0x29 && sshdr.ascq == 0x00)
2336 /* Device reset might occur several times,
2337 * give it one more chance */
2338 if (--reset_retries > 0)
2339 continue;
2340 }
2341 retries--;
2342
2343 } while (the_result && retries);
2344
2345 if (the_result) {
2346 sd_print_result(sdkp, "Read Capacity(16) failed", the_result);
2347 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
2348 return -EINVAL;
2349 }
2350
2351 sector_size = get_unaligned_be32(&buffer[8]);
2352 lba = get_unaligned_be64(&buffer[0]);
2353
2354 if (sd_read_protection_type(sdkp, buffer) < 0) {
2355 sdkp->capacity = 0;
2356 return -ENODEV;
2357 }
2358
2359 /* Logical blocks per physical block exponent */
2360 sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size;
2361
2362 /* RC basis */
2363 sdkp->rc_basis = (buffer[12] >> 4) & 0x3;
2364
2365 /* Lowest aligned logical block */
2366 alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
2367 blk_queue_alignment_offset(sdp->request_queue, alignment);
2368 if (alignment && sdkp->first_scan)
2369 sd_printk(KERN_NOTICE, sdkp,
2370 "physical block alignment offset: %u\n", alignment);
2371
2372 if (buffer[14] & 0x80) { /* LBPME */
2373 sdkp->lbpme = 1;
2374
2375 if (buffer[14] & 0x40) /* LBPRZ */
2376 sdkp->lbprz = 1;
2377
2378 sd_config_discard(sdkp, SD_LBP_WS16);
2379 }
2380
2381 sdkp->capacity = lba + 1;
2382 return sector_size;
2383}
2384
2385static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
2386 unsigned char *buffer)
2387{
2388 unsigned char cmd[16];
2389 struct scsi_sense_hdr sshdr;
2390 int sense_valid = 0;
2391 int the_result;
2392 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
2393 sector_t lba;
2394 unsigned sector_size;
2395
2396 do {
2397 cmd[0] = READ_CAPACITY;
2398 memset(&cmd[1], 0, 9);
2399 memset(buffer, 0, 8);
2400
2401 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
2402 buffer, 8, &sshdr,
2403 SD_TIMEOUT, sdkp->max_retries, NULL);
2404
2405 if (media_not_present(sdkp, &sshdr))
2406 return -ENODEV;
2407
2408 if (the_result > 0) {
2409 sense_valid = scsi_sense_valid(&sshdr);
2410 if (sense_valid &&
2411 sshdr.sense_key == UNIT_ATTENTION &&
2412 sshdr.asc == 0x29 && sshdr.ascq == 0x00)
2413 /* Device reset might occur several times,
2414 * give it one more chance */
2415 if (--reset_retries > 0)
2416 continue;
2417 }
2418 retries--;
2419
2420 } while (the_result && retries);
2421
2422 if (the_result) {
2423 sd_print_result(sdkp, "Read Capacity(10) failed", the_result);
2424 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
2425 return -EINVAL;
2426 }
2427
2428 sector_size = get_unaligned_be32(&buffer[4]);
2429 lba = get_unaligned_be32(&buffer[0]);
2430
2431 if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) {
2432 /* Some buggy (usb cardreader) devices return an lba of
2433 0xffffffff when the want to report a size of 0 (with
2434 which they really mean no media is present) */
2435 sdkp->capacity = 0;
2436 sdkp->physical_block_size = sector_size;
2437 return sector_size;
2438 }
2439
2440 sdkp->capacity = lba + 1;
2441 sdkp->physical_block_size = sector_size;
2442 return sector_size;
2443}
2444
2445static int sd_try_rc16_first(struct scsi_device *sdp)
2446{
2447 if (sdp->host->max_cmd_len < 16)
2448 return 0;
2449 if (sdp->try_rc_10_first)
2450 return 0;
2451 if (sdp->scsi_level > SCSI_SPC_2)
2452 return 1;
2453 if (scsi_device_protection(sdp))
2454 return 1;
2455 return 0;
2456}
2457
2458/*
2459 * read disk capacity
2460 */
2461static void
2462sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
2463{
2464 int sector_size;
2465 struct scsi_device *sdp = sdkp->device;
2466
2467 if (sd_try_rc16_first(sdp)) {
2468 sector_size = read_capacity_16(sdkp, sdp, buffer);
2469 if (sector_size == -EOVERFLOW)
2470 goto got_data;
2471 if (sector_size == -ENODEV)
2472 return;
2473 if (sector_size < 0)
2474 sector_size = read_capacity_10(sdkp, sdp, buffer);
2475 if (sector_size < 0)
2476 return;
2477 } else {
2478 sector_size = read_capacity_10(sdkp, sdp, buffer);
2479 if (sector_size == -EOVERFLOW)
2480 goto got_data;
2481 if (sector_size < 0)
2482 return;
2483 if ((sizeof(sdkp->capacity) > 4) &&
2484 (sdkp->capacity > 0xffffffffULL)) {
2485 int old_sector_size = sector_size;
2486 sd_printk(KERN_NOTICE, sdkp, "Very big device. "
2487 "Trying to use READ CAPACITY(16).\n");
2488 sector_size = read_capacity_16(sdkp, sdp, buffer);
2489 if (sector_size < 0) {
2490 sd_printk(KERN_NOTICE, sdkp,
2491 "Using 0xffffffff as device size\n");
2492 sdkp->capacity = 1 + (sector_t) 0xffffffff;
2493 sector_size = old_sector_size;
2494 goto got_data;
2495 }
2496 /* Remember that READ CAPACITY(16) succeeded */
2497 sdp->try_rc_10_first = 0;
2498 }
2499 }
2500
2501 /* Some devices are known to return the total number of blocks,
2502 * not the highest block number. Some devices have versions
2503 * which do this and others which do not. Some devices we might
2504 * suspect of doing this but we don't know for certain.
2505 *
2506 * If we know the reported capacity is wrong, decrement it. If
2507 * we can only guess, then assume the number of blocks is even
2508 * (usually true but not always) and err on the side of lowering
2509 * the capacity.
2510 */
2511 if (sdp->fix_capacity ||
2512 (sdp->guess_capacity && (sdkp->capacity & 0x01))) {
2513 sd_printk(KERN_INFO, sdkp, "Adjusting the sector count "
2514 "from its reported value: %llu\n",
2515 (unsigned long long) sdkp->capacity);
2516 --sdkp->capacity;
2517 }
2518
2519got_data:
2520 if (sector_size == 0) {
2521 sector_size = 512;
2522 sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
2523 "assuming 512.\n");
2524 }
2525
2526 if (sector_size != 512 &&
2527 sector_size != 1024 &&
2528 sector_size != 2048 &&
2529 sector_size != 4096) {
2530 sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
2531 sector_size);
2532 /*
2533 * The user might want to re-format the drive with
2534 * a supported sectorsize. Once this happens, it
2535 * would be relatively trivial to set the thing up.
2536 * For this reason, we leave the thing in the table.
2537 */
2538 sdkp->capacity = 0;
2539 /*
2540 * set a bogus sector size so the normal read/write
2541 * logic in the block layer will eventually refuse any
2542 * request on this device without tripping over power
2543 * of two sector size assumptions
2544 */
2545 sector_size = 512;
2546 }
2547 blk_queue_logical_block_size(sdp->request_queue, sector_size);
2548 blk_queue_physical_block_size(sdp->request_queue,
2549 sdkp->physical_block_size);
2550 sdkp->device->sector_size = sector_size;
2551
2552 if (sdkp->capacity > 0xffffffff)
2553 sdp->use_16_for_rw = 1;
2554
2555}
2556
2557/*
2558 * Print disk capacity
2559 */
2560static void
2561sd_print_capacity(struct scsi_disk *sdkp,
2562 sector_t old_capacity)
2563{
2564 int sector_size = sdkp->device->sector_size;
2565 char cap_str_2[10], cap_str_10[10];
2566
2567 if (!sdkp->first_scan && old_capacity == sdkp->capacity)
2568 return;
2569
2570 string_get_size(sdkp->capacity, sector_size,
2571 STRING_UNITS_2, cap_str_2, sizeof(cap_str_2));
2572 string_get_size(sdkp->capacity, sector_size,
2573 STRING_UNITS_10, cap_str_10, sizeof(cap_str_10));
2574
2575 sd_printk(KERN_NOTICE, sdkp,
2576 "%llu %d-byte logical blocks: (%s/%s)\n",
2577 (unsigned long long)sdkp->capacity,
2578 sector_size, cap_str_10, cap_str_2);
2579
2580 if (sdkp->physical_block_size != sector_size)
2581 sd_printk(KERN_NOTICE, sdkp,
2582 "%u-byte physical blocks\n",
2583 sdkp->physical_block_size);
2584}
2585
2586/* called with buffer of length 512 */
2587static inline int
2588sd_do_mode_sense(struct scsi_disk *sdkp, int dbd, int modepage,
2589 unsigned char *buffer, int len, struct scsi_mode_data *data,
2590 struct scsi_sense_hdr *sshdr)
2591{
2592 /*
2593 * If we must use MODE SENSE(10), make sure that the buffer length
2594 * is at least 8 bytes so that the mode sense header fits.
2595 */
2596 if (sdkp->device->use_10_for_ms && len < 8)
2597 len = 8;
2598
2599 return scsi_mode_sense(sdkp->device, dbd, modepage, buffer, len,
2600 SD_TIMEOUT, sdkp->max_retries, data,
2601 sshdr);
2602}
2603
2604/*
2605 * read write protect setting, if possible - called only in sd_revalidate_disk()
2606 * called with buffer of length SD_BUF_SIZE
2607 */
2608static void
2609sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
2610{
2611 int res;
2612 struct scsi_device *sdp = sdkp->device;
2613 struct scsi_mode_data data;
2614 int old_wp = sdkp->write_prot;
2615
2616 set_disk_ro(sdkp->disk, 0);
2617 if (sdp->skip_ms_page_3f) {
2618 sd_first_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
2619 return;
2620 }
2621
2622 if (sdp->use_192_bytes_for_3f) {
2623 res = sd_do_mode_sense(sdkp, 0, 0x3F, buffer, 192, &data, NULL);
2624 } else {
2625 /*
2626 * First attempt: ask for all pages (0x3F), but only 4 bytes.
2627 * We have to start carefully: some devices hang if we ask
2628 * for more than is available.
2629 */
2630 res = sd_do_mode_sense(sdkp, 0, 0x3F, buffer, 4, &data, NULL);
2631
2632 /*
2633 * Second attempt: ask for page 0 When only page 0 is
2634 * implemented, a request for page 3F may return Sense Key
2635 * 5: Illegal Request, Sense Code 24: Invalid field in
2636 * CDB.
2637 */
2638 if (res < 0)
2639 res = sd_do_mode_sense(sdkp, 0, 0, buffer, 4, &data, NULL);
2640
2641 /*
2642 * Third attempt: ask 255 bytes, as we did earlier.
2643 */
2644 if (res < 0)
2645 res = sd_do_mode_sense(sdkp, 0, 0x3F, buffer, 255,
2646 &data, NULL);
2647 }
2648
2649 if (res < 0) {
2650 sd_first_printk(KERN_WARNING, sdkp,
2651 "Test WP failed, assume Write Enabled\n");
2652 } else {
2653 sdkp->write_prot = ((data.device_specific & 0x80) != 0);
2654 set_disk_ro(sdkp->disk, sdkp->write_prot);
2655 if (sdkp->first_scan || old_wp != sdkp->write_prot) {
2656 sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
2657 sdkp->write_prot ? "on" : "off");
2658 sd_printk(KERN_DEBUG, sdkp, "Mode Sense: %4ph\n", buffer);
2659 }
2660 }
2661}
2662
2663/*
2664 * sd_read_cache_type - called only from sd_revalidate_disk()
2665 * called with buffer of length SD_BUF_SIZE
2666 */
2667static void
2668sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
2669{
2670 int len = 0, res;
2671 struct scsi_device *sdp = sdkp->device;
2672
2673 int dbd;
2674 int modepage;
2675 int first_len;
2676 struct scsi_mode_data data;
2677 struct scsi_sense_hdr sshdr;
2678 int old_wce = sdkp->WCE;
2679 int old_rcd = sdkp->RCD;
2680 int old_dpofua = sdkp->DPOFUA;
2681
2682
2683 if (sdkp->cache_override)
2684 return;
2685
2686 first_len = 4;
2687 if (sdp->skip_ms_page_8) {
2688 if (sdp->type == TYPE_RBC)
2689 goto defaults;
2690 else {
2691 if (sdp->skip_ms_page_3f)
2692 goto defaults;
2693 modepage = 0x3F;
2694 if (sdp->use_192_bytes_for_3f)
2695 first_len = 192;
2696 dbd = 0;
2697 }
2698 } else if (sdp->type == TYPE_RBC) {
2699 modepage = 6;
2700 dbd = 8;
2701 } else {
2702 modepage = 8;
2703 dbd = 0;
2704 }
2705
2706 /* cautiously ask */
2707 res = sd_do_mode_sense(sdkp, dbd, modepage, buffer, first_len,
2708 &data, &sshdr);
2709
2710 if (res < 0)
2711 goto bad_sense;
2712
2713 if (!data.header_length) {
2714 modepage = 6;
2715 first_len = 0;
2716 sd_first_printk(KERN_ERR, sdkp,
2717 "Missing header in MODE_SENSE response\n");
2718 }
2719
2720 /* that went OK, now ask for the proper length */
2721 len = data.length;
2722
2723 /*
2724 * We're only interested in the first three bytes, actually.
2725 * But the data cache page is defined for the first 20.
2726 */
2727 if (len < 3)
2728 goto bad_sense;
2729 else if (len > SD_BUF_SIZE) {
2730 sd_first_printk(KERN_NOTICE, sdkp, "Truncating mode parameter "
2731 "data from %d to %d bytes\n", len, SD_BUF_SIZE);
2732 len = SD_BUF_SIZE;
2733 }
2734 if (modepage == 0x3F && sdp->use_192_bytes_for_3f)
2735 len = 192;
2736
2737 /* Get the data */
2738 if (len > first_len)
2739 res = sd_do_mode_sense(sdkp, dbd, modepage, buffer, len,
2740 &data, &sshdr);
2741
2742 if (!res) {
2743 int offset = data.header_length + data.block_descriptor_length;
2744
2745 while (offset < len) {
2746 u8 page_code = buffer[offset] & 0x3F;
2747 u8 spf = buffer[offset] & 0x40;
2748
2749 if (page_code == 8 || page_code == 6) {
2750 /* We're interested only in the first 3 bytes.
2751 */
2752 if (len - offset <= 2) {
2753 sd_first_printk(KERN_ERR, sdkp,
2754 "Incomplete mode parameter "
2755 "data\n");
2756 goto defaults;
2757 } else {
2758 modepage = page_code;
2759 goto Page_found;
2760 }
2761 } else {
2762 /* Go to the next page */
2763 if (spf && len - offset > 3)
2764 offset += 4 + (buffer[offset+2] << 8) +
2765 buffer[offset+3];
2766 else if (!spf && len - offset > 1)
2767 offset += 2 + buffer[offset+1];
2768 else {
2769 sd_first_printk(KERN_ERR, sdkp,
2770 "Incomplete mode "
2771 "parameter data\n");
2772 goto defaults;
2773 }
2774 }
2775 }
2776
2777 sd_first_printk(KERN_WARNING, sdkp,
2778 "No Caching mode page found\n");
2779 goto defaults;
2780
2781 Page_found:
2782 if (modepage == 8) {
2783 sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
2784 sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
2785 } else {
2786 sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
2787 sdkp->RCD = 0;
2788 }
2789
2790 sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
2791 if (sdp->broken_fua) {
2792 sd_first_printk(KERN_NOTICE, sdkp, "Disabling FUA\n");
2793 sdkp->DPOFUA = 0;
2794 } else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw &&
2795 !sdkp->device->use_16_for_rw) {
2796 sd_first_printk(KERN_NOTICE, sdkp,
2797 "Uses READ/WRITE(6), disabling FUA\n");
2798 sdkp->DPOFUA = 0;
2799 }
2800
2801 /* No cache flush allowed for write protected devices */
2802 if (sdkp->WCE && sdkp->write_prot)
2803 sdkp->WCE = 0;
2804
2805 if (sdkp->first_scan || old_wce != sdkp->WCE ||
2806 old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA)
2807 sd_printk(KERN_NOTICE, sdkp,
2808 "Write cache: %s, read cache: %s, %s\n",
2809 sdkp->WCE ? "enabled" : "disabled",
2810 sdkp->RCD ? "disabled" : "enabled",
2811 sdkp->DPOFUA ? "supports DPO and FUA"
2812 : "doesn't support DPO or FUA");
2813
2814 return;
2815 }
2816
2817bad_sense:
2818 if (scsi_sense_valid(&sshdr) &&
2819 sshdr.sense_key == ILLEGAL_REQUEST &&
2820 sshdr.asc == 0x24 && sshdr.ascq == 0x0)
2821 /* Invalid field in CDB */
2822 sd_first_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
2823 else
2824 sd_first_printk(KERN_ERR, sdkp,
2825 "Asking for cache data failed\n");
2826
2827defaults:
2828 if (sdp->wce_default_on) {
2829 sd_first_printk(KERN_NOTICE, sdkp,
2830 "Assuming drive cache: write back\n");
2831 sdkp->WCE = 1;
2832 } else {
2833 sd_first_printk(KERN_WARNING, sdkp,
2834 "Assuming drive cache: write through\n");
2835 sdkp->WCE = 0;
2836 }
2837 sdkp->RCD = 0;
2838 sdkp->DPOFUA = 0;
2839}
2840
2841/*
2842 * The ATO bit indicates whether the DIF application tag is available
2843 * for use by the operating system.
2844 */
2845static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
2846{
2847 int res, offset;
2848 struct scsi_device *sdp = sdkp->device;
2849 struct scsi_mode_data data;
2850 struct scsi_sense_hdr sshdr;
2851
2852 if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
2853 return;
2854
2855 if (sdkp->protection_type == 0)
2856 return;
2857
2858 res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
2859 sdkp->max_retries, &data, &sshdr);
2860
2861 if (res < 0 || !data.header_length ||
2862 data.length < 6) {
2863 sd_first_printk(KERN_WARNING, sdkp,
2864 "getting Control mode page failed, assume no ATO\n");
2865
2866 if (scsi_sense_valid(&sshdr))
2867 sd_print_sense_hdr(sdkp, &sshdr);
2868
2869 return;
2870 }
2871
2872 offset = data.header_length + data.block_descriptor_length;
2873
2874 if ((buffer[offset] & 0x3f) != 0x0a) {
2875 sd_first_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
2876 return;
2877 }
2878
2879 if ((buffer[offset + 5] & 0x80) == 0)
2880 return;
2881
2882 sdkp->ATO = 1;
2883
2884 return;
2885}
2886
2887/**
2888 * sd_read_block_limits - Query disk device for preferred I/O sizes.
2889 * @sdkp: disk to query
2890 */
2891static void sd_read_block_limits(struct scsi_disk *sdkp)
2892{
2893 struct scsi_vpd *vpd;
2894
2895 rcu_read_lock();
2896
2897 vpd = rcu_dereference(sdkp->device->vpd_pgb0);
2898 if (!vpd || vpd->len < 16)
2899 goto out;
2900
2901 sdkp->min_xfer_blocks = get_unaligned_be16(&vpd->data[6]);
2902 sdkp->max_xfer_blocks = get_unaligned_be32(&vpd->data[8]);
2903 sdkp->opt_xfer_blocks = get_unaligned_be32(&vpd->data[12]);
2904
2905 if (vpd->len >= 64) {
2906 unsigned int lba_count, desc_count;
2907
2908 sdkp->max_ws_blocks = (u32)get_unaligned_be64(&vpd->data[36]);
2909
2910 if (!sdkp->lbpme)
2911 goto out;
2912
2913 lba_count = get_unaligned_be32(&vpd->data[20]);
2914 desc_count = get_unaligned_be32(&vpd->data[24]);
2915
2916 if (lba_count && desc_count)
2917 sdkp->max_unmap_blocks = lba_count;
2918
2919 sdkp->unmap_granularity = get_unaligned_be32(&vpd->data[28]);
2920
2921 if (vpd->data[32] & 0x80)
2922 sdkp->unmap_alignment =
2923 get_unaligned_be32(&vpd->data[32]) & ~(1 << 31);
2924
2925 if (!sdkp->lbpvpd) { /* LBP VPD page not provided */
2926
2927 if (sdkp->max_unmap_blocks)
2928 sd_config_discard(sdkp, SD_LBP_UNMAP);
2929 else
2930 sd_config_discard(sdkp, SD_LBP_WS16);
2931
2932 } else { /* LBP VPD page tells us what to use */
2933 if (sdkp->lbpu && sdkp->max_unmap_blocks)
2934 sd_config_discard(sdkp, SD_LBP_UNMAP);
2935 else if (sdkp->lbpws)
2936 sd_config_discard(sdkp, SD_LBP_WS16);
2937 else if (sdkp->lbpws10)
2938 sd_config_discard(sdkp, SD_LBP_WS10);
2939 else
2940 sd_config_discard(sdkp, SD_LBP_DISABLE);
2941 }
2942 }
2943
2944 out:
2945 rcu_read_unlock();
2946}
2947
2948/**
2949 * sd_read_block_characteristics - Query block dev. characteristics
2950 * @sdkp: disk to query
2951 */
2952static void sd_read_block_characteristics(struct scsi_disk *sdkp)
2953{
2954 struct request_queue *q = sdkp->disk->queue;
2955 struct scsi_vpd *vpd;
2956 u16 rot;
2957 u8 zoned;
2958
2959 rcu_read_lock();
2960 vpd = rcu_dereference(sdkp->device->vpd_pgb1);
2961
2962 if (!vpd || vpd->len < 8) {
2963 rcu_read_unlock();
2964 return;
2965 }
2966
2967 rot = get_unaligned_be16(&vpd->data[4]);
2968 zoned = (vpd->data[8] >> 4) & 3;
2969 rcu_read_unlock();
2970
2971 if (rot == 1) {
2972 blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
2973 blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, q);
2974 }
2975
2976 if (sdkp->device->type == TYPE_ZBC) {
2977 /* Host-managed */
2978 disk_set_zoned(sdkp->disk, BLK_ZONED_HM);
2979 } else {
2980 sdkp->zoned = zoned;
2981 if (sdkp->zoned == 1) {
2982 /* Host-aware */
2983 disk_set_zoned(sdkp->disk, BLK_ZONED_HA);
2984 } else {
2985 /* Regular disk or drive managed disk */
2986 disk_set_zoned(sdkp->disk, BLK_ZONED_NONE);
2987 }
2988 }
2989
2990 if (!sdkp->first_scan)
2991 return;
2992
2993 if (blk_queue_is_zoned(q)) {
2994 sd_printk(KERN_NOTICE, sdkp, "Host-%s zoned block device\n",
2995 q->limits.zoned == BLK_ZONED_HM ? "managed" : "aware");
2996 } else {
2997 if (sdkp->zoned == 1)
2998 sd_printk(KERN_NOTICE, sdkp,
2999 "Host-aware SMR disk used as regular disk\n");
3000 else if (sdkp->zoned == 2)
3001 sd_printk(KERN_NOTICE, sdkp,
3002 "Drive-managed SMR disk\n");
3003 }
3004}
3005
3006/**
3007 * sd_read_block_provisioning - Query provisioning VPD page
3008 * @sdkp: disk to query
3009 */
3010static void sd_read_block_provisioning(struct scsi_disk *sdkp)
3011{
3012 struct scsi_vpd *vpd;
3013
3014 if (sdkp->lbpme == 0)
3015 return;
3016
3017 rcu_read_lock();
3018 vpd = rcu_dereference(sdkp->device->vpd_pgb2);
3019
3020 if (!vpd || vpd->len < 8) {
3021 rcu_read_unlock();
3022 return;
3023 }
3024
3025 sdkp->lbpvpd = 1;
3026 sdkp->lbpu = (vpd->data[5] >> 7) & 1; /* UNMAP */
3027 sdkp->lbpws = (vpd->data[5] >> 6) & 1; /* WRITE SAME(16) w/ UNMAP */
3028 sdkp->lbpws10 = (vpd->data[5] >> 5) & 1; /* WRITE SAME(10) w/ UNMAP */
3029 rcu_read_unlock();
3030}
3031
3032static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
3033{
3034 struct scsi_device *sdev = sdkp->device;
3035
3036 if (sdev->host->no_write_same) {
3037 sdev->no_write_same = 1;
3038
3039 return;
3040 }
3041
3042 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) {
3043 struct scsi_vpd *vpd;
3044
3045 sdev->no_report_opcodes = 1;
3046
3047 /* Disable WRITE SAME if REPORT SUPPORTED OPERATION
3048 * CODES is unsupported and the device has an ATA
3049 * Information VPD page (SAT).
3050 */
3051 rcu_read_lock();
3052 vpd = rcu_dereference(sdev->vpd_pg89);
3053 if (vpd)
3054 sdev->no_write_same = 1;
3055 rcu_read_unlock();
3056 }
3057
3058 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME_16) == 1)
3059 sdkp->ws16 = 1;
3060
3061 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME) == 1)
3062 sdkp->ws10 = 1;
3063}
3064
3065static void sd_read_security(struct scsi_disk *sdkp, unsigned char *buffer)
3066{
3067 struct scsi_device *sdev = sdkp->device;
3068
3069 if (!sdev->security_supported)
3070 return;
3071
3072 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
3073 SECURITY_PROTOCOL_IN) == 1 &&
3074 scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
3075 SECURITY_PROTOCOL_OUT) == 1)
3076 sdkp->security = 1;
3077}
3078
3079static inline sector_t sd64_to_sectors(struct scsi_disk *sdkp, u8 *buf)
3080{
3081 return logical_to_sectors(sdkp->device, get_unaligned_be64(buf));
3082}
3083
3084/**
3085 * sd_read_cpr - Query concurrent positioning ranges
3086 * @sdkp: disk to query
3087 */
3088static void sd_read_cpr(struct scsi_disk *sdkp)
3089{
3090 struct blk_independent_access_ranges *iars = NULL;
3091 unsigned char *buffer = NULL;
3092 unsigned int nr_cpr = 0;
3093 int i, vpd_len, buf_len = SD_BUF_SIZE;
3094 u8 *desc;
3095
3096 /*
3097 * We need to have the capacity set first for the block layer to be
3098 * able to check the ranges.
3099 */
3100 if (sdkp->first_scan)
3101 return;
3102
3103 if (!sdkp->capacity)
3104 goto out;
3105
3106 /*
3107 * Concurrent Positioning Ranges VPD: there can be at most 256 ranges,
3108 * leading to a maximum page size of 64 + 256*32 bytes.
3109 */
3110 buf_len = 64 + 256*32;
3111 buffer = kmalloc(buf_len, GFP_KERNEL);
3112 if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb9, buffer, buf_len))
3113 goto out;
3114
3115 /* We must have at least a 64B header and one 32B range descriptor */
3116 vpd_len = get_unaligned_be16(&buffer[2]) + 4;
3117 if (vpd_len > buf_len || vpd_len < 64 + 32 || (vpd_len & 31)) {
3118 sd_printk(KERN_ERR, sdkp,
3119 "Invalid Concurrent Positioning Ranges VPD page\n");
3120 goto out;
3121 }
3122
3123 nr_cpr = (vpd_len - 64) / 32;
3124 if (nr_cpr == 1) {
3125 nr_cpr = 0;
3126 goto out;
3127 }
3128
3129 iars = disk_alloc_independent_access_ranges(sdkp->disk, nr_cpr);
3130 if (!iars) {
3131 nr_cpr = 0;
3132 goto out;
3133 }
3134
3135 desc = &buffer[64];
3136 for (i = 0; i < nr_cpr; i++, desc += 32) {
3137 if (desc[0] != i) {
3138 sd_printk(KERN_ERR, sdkp,
3139 "Invalid Concurrent Positioning Range number\n");
3140 nr_cpr = 0;
3141 break;
3142 }
3143
3144 iars->ia_range[i].sector = sd64_to_sectors(sdkp, desc + 8);
3145 iars->ia_range[i].nr_sectors = sd64_to_sectors(sdkp, desc + 16);
3146 }
3147
3148out:
3149 disk_set_independent_access_ranges(sdkp->disk, iars);
3150 if (nr_cpr && sdkp->nr_actuators != nr_cpr) {
3151 sd_printk(KERN_NOTICE, sdkp,
3152 "%u concurrent positioning ranges\n", nr_cpr);
3153 sdkp->nr_actuators = nr_cpr;
3154 }
3155
3156 kfree(buffer);
3157}
3158
3159static bool sd_validate_min_xfer_size(struct scsi_disk *sdkp)
3160{
3161 struct scsi_device *sdp = sdkp->device;
3162 unsigned int min_xfer_bytes =
3163 logical_to_bytes(sdp, sdkp->min_xfer_blocks);
3164
3165 if (sdkp->min_xfer_blocks == 0)
3166 return false;
3167
3168 if (min_xfer_bytes & (sdkp->physical_block_size - 1)) {
3169 sd_first_printk(KERN_WARNING, sdkp,
3170 "Preferred minimum I/O size %u bytes not a " \
3171 "multiple of physical block size (%u bytes)\n",
3172 min_xfer_bytes, sdkp->physical_block_size);
3173 sdkp->min_xfer_blocks = 0;
3174 return false;
3175 }
3176
3177 sd_first_printk(KERN_INFO, sdkp, "Preferred minimum I/O size %u bytes\n",
3178 min_xfer_bytes);
3179 return true;
3180}
3181
3182/*
3183 * Determine the device's preferred I/O size for reads and writes
3184 * unless the reported value is unreasonably small, large, not a
3185 * multiple of the physical block size, or simply garbage.
3186 */
3187static bool sd_validate_opt_xfer_size(struct scsi_disk *sdkp,
3188 unsigned int dev_max)
3189{
3190 struct scsi_device *sdp = sdkp->device;
3191 unsigned int opt_xfer_bytes =
3192 logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
3193 unsigned int min_xfer_bytes =
3194 logical_to_bytes(sdp, sdkp->min_xfer_blocks);
3195
3196 if (sdkp->opt_xfer_blocks == 0)
3197 return false;
3198
3199 if (sdkp->opt_xfer_blocks > dev_max) {
3200 sd_first_printk(KERN_WARNING, sdkp,
3201 "Optimal transfer size %u logical blocks " \
3202 "> dev_max (%u logical blocks)\n",
3203 sdkp->opt_xfer_blocks, dev_max);
3204 return false;
3205 }
3206
3207 if (sdkp->opt_xfer_blocks > SD_DEF_XFER_BLOCKS) {
3208 sd_first_printk(KERN_WARNING, sdkp,
3209 "Optimal transfer size %u logical blocks " \
3210 "> sd driver limit (%u logical blocks)\n",
3211 sdkp->opt_xfer_blocks, SD_DEF_XFER_BLOCKS);
3212 return false;
3213 }
3214
3215 if (opt_xfer_bytes < PAGE_SIZE) {
3216 sd_first_printk(KERN_WARNING, sdkp,
3217 "Optimal transfer size %u bytes < " \
3218 "PAGE_SIZE (%u bytes)\n",
3219 opt_xfer_bytes, (unsigned int)PAGE_SIZE);
3220 return false;
3221 }
3222
3223 if (min_xfer_bytes && opt_xfer_bytes % min_xfer_bytes) {
3224 sd_first_printk(KERN_WARNING, sdkp,
3225 "Optimal transfer size %u bytes not a " \
3226 "multiple of preferred minimum block " \
3227 "size (%u bytes)\n",
3228 opt_xfer_bytes, min_xfer_bytes);
3229 return false;
3230 }
3231
3232 if (opt_xfer_bytes & (sdkp->physical_block_size - 1)) {
3233 sd_first_printk(KERN_WARNING, sdkp,
3234 "Optimal transfer size %u bytes not a " \
3235 "multiple of physical block size (%u bytes)\n",
3236 opt_xfer_bytes, sdkp->physical_block_size);
3237 return false;
3238 }
3239
3240 sd_first_printk(KERN_INFO, sdkp, "Optimal transfer size %u bytes\n",
3241 opt_xfer_bytes);
3242 return true;
3243}
3244
3245/**
3246 * sd_revalidate_disk - called the first time a new disk is seen,
3247 * performs disk spin up, read_capacity, etc.
3248 * @disk: struct gendisk we care about
3249 **/
3250static int sd_revalidate_disk(struct gendisk *disk)
3251{
3252 struct scsi_disk *sdkp = scsi_disk(disk);
3253 struct scsi_device *sdp = sdkp->device;
3254 struct request_queue *q = sdkp->disk->queue;
3255 sector_t old_capacity = sdkp->capacity;
3256 unsigned char *buffer;
3257 unsigned int dev_max, rw_max;
3258
3259 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
3260 "sd_revalidate_disk\n"));
3261
3262 /*
3263 * If the device is offline, don't try and read capacity or any
3264 * of the other niceties.
3265 */
3266 if (!scsi_device_online(sdp))
3267 goto out;
3268
3269 buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
3270 if (!buffer) {
3271 sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
3272 "allocation failure.\n");
3273 goto out;
3274 }
3275
3276 sd_spinup_disk(sdkp);
3277
3278 /*
3279 * Without media there is no reason to ask; moreover, some devices
3280 * react badly if we do.
3281 */
3282 if (sdkp->media_present) {
3283 sd_read_capacity(sdkp, buffer);
3284
3285 /*
3286 * set the default to rotational. All non-rotational devices
3287 * support the block characteristics VPD page, which will
3288 * cause this to be updated correctly and any device which
3289 * doesn't support it should be treated as rotational.
3290 */
3291 blk_queue_flag_clear(QUEUE_FLAG_NONROT, q);
3292 blk_queue_flag_set(QUEUE_FLAG_ADD_RANDOM, q);
3293
3294 if (scsi_device_supports_vpd(sdp)) {
3295 sd_read_block_provisioning(sdkp);
3296 sd_read_block_limits(sdkp);
3297 sd_read_block_characteristics(sdkp);
3298 sd_zbc_read_zones(sdkp, buffer);
3299 sd_read_cpr(sdkp);
3300 }
3301
3302 sd_print_capacity(sdkp, old_capacity);
3303
3304 sd_read_write_protect_flag(sdkp, buffer);
3305 sd_read_cache_type(sdkp, buffer);
3306 sd_read_app_tag_own(sdkp, buffer);
3307 sd_read_write_same(sdkp, buffer);
3308 sd_read_security(sdkp, buffer);
3309 sd_config_protection(sdkp);
3310 }
3311
3312 /*
3313 * We now have all cache related info, determine how we deal
3314 * with flush requests.
3315 */
3316 sd_set_flush_flag(sdkp);
3317
3318 /* Initial block count limit based on CDB TRANSFER LENGTH field size. */
3319 dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS;
3320
3321 /* Some devices report a maximum block count for READ/WRITE requests. */
3322 dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks);
3323 q->limits.max_dev_sectors = logical_to_sectors(sdp, dev_max);
3324
3325 if (sd_validate_min_xfer_size(sdkp))
3326 blk_queue_io_min(sdkp->disk->queue,
3327 logical_to_bytes(sdp, sdkp->min_xfer_blocks));
3328 else
3329 blk_queue_io_min(sdkp->disk->queue, 0);
3330
3331 if (sd_validate_opt_xfer_size(sdkp, dev_max)) {
3332 q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
3333 rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
3334 } else {
3335 q->limits.io_opt = 0;
3336 rw_max = min_not_zero(logical_to_sectors(sdp, dev_max),
3337 (sector_t)BLK_DEF_MAX_SECTORS);
3338 }
3339
3340 /*
3341 * Limit default to SCSI host optimal sector limit if set. There may be
3342 * an impact on performance for when the size of a request exceeds this
3343 * host limit.
3344 */
3345 rw_max = min_not_zero(rw_max, sdp->host->opt_sectors);
3346
3347 /* Do not exceed controller limit */
3348 rw_max = min(rw_max, queue_max_hw_sectors(q));
3349
3350 /*
3351 * Only update max_sectors if previously unset or if the current value
3352 * exceeds the capabilities of the hardware.
3353 */
3354 if (sdkp->first_scan ||
3355 q->limits.max_sectors > q->limits.max_dev_sectors ||
3356 q->limits.max_sectors > q->limits.max_hw_sectors)
3357 q->limits.max_sectors = rw_max;
3358
3359 sdkp->first_scan = 0;
3360
3361 set_capacity_and_notify(disk, logical_to_sectors(sdp, sdkp->capacity));
3362 sd_config_write_same(sdkp);
3363 kfree(buffer);
3364
3365 /*
3366 * For a zoned drive, revalidating the zones can be done only once
3367 * the gendisk capacity is set. So if this fails, set back the gendisk
3368 * capacity to 0.
3369 */
3370 if (sd_zbc_revalidate_zones(sdkp))
3371 set_capacity_and_notify(disk, 0);
3372
3373 out:
3374 return 0;
3375}
3376
3377/**
3378 * sd_unlock_native_capacity - unlock native capacity
3379 * @disk: struct gendisk to set capacity for
3380 *
3381 * Block layer calls this function if it detects that partitions
3382 * on @disk reach beyond the end of the device. If the SCSI host
3383 * implements ->unlock_native_capacity() method, it's invoked to
3384 * give it a chance to adjust the device capacity.
3385 *
3386 * CONTEXT:
3387 * Defined by block layer. Might sleep.
3388 */
3389static void sd_unlock_native_capacity(struct gendisk *disk)
3390{
3391 struct scsi_device *sdev = scsi_disk(disk)->device;
3392
3393 if (sdev->host->hostt->unlock_native_capacity)
3394 sdev->host->hostt->unlock_native_capacity(sdev);
3395}
3396
3397/**
3398 * sd_format_disk_name - format disk name
3399 * @prefix: name prefix - ie. "sd" for SCSI disks
3400 * @index: index of the disk to format name for
3401 * @buf: output buffer
3402 * @buflen: length of the output buffer
3403 *
3404 * SCSI disk names starts at sda. The 26th device is sdz and the
3405 * 27th is sdaa. The last one for two lettered suffix is sdzz
3406 * which is followed by sdaaa.
3407 *
3408 * This is basically 26 base counting with one extra 'nil' entry
3409 * at the beginning from the second digit on and can be
3410 * determined using similar method as 26 base conversion with the
3411 * index shifted -1 after each digit is computed.
3412 *
3413 * CONTEXT:
3414 * Don't care.
3415 *
3416 * RETURNS:
3417 * 0 on success, -errno on failure.
3418 */
3419static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
3420{
3421 const int base = 'z' - 'a' + 1;
3422 char *begin = buf + strlen(prefix);
3423 char *end = buf + buflen;
3424 char *p;
3425 int unit;
3426
3427 p = end - 1;
3428 *p = '\0';
3429 unit = base;
3430 do {
3431 if (p == begin)
3432 return -EINVAL;
3433 *--p = 'a' + (index % unit);
3434 index = (index / unit) - 1;
3435 } while (index >= 0);
3436
3437 memmove(begin, p, end - p);
3438 memcpy(buf, prefix, strlen(prefix));
3439
3440 return 0;
3441}
3442
3443/**
3444 * sd_probe - called during driver initialization and whenever a
3445 * new scsi device is attached to the system. It is called once
3446 * for each scsi device (not just disks) present.
3447 * @dev: pointer to device object
3448 *
3449 * Returns 0 if successful (or not interested in this scsi device
3450 * (e.g. scanner)); 1 when there is an error.
3451 *
3452 * Note: this function is invoked from the scsi mid-level.
3453 * This function sets up the mapping between a given
3454 * <host,channel,id,lun> (found in sdp) and new device name
3455 * (e.g. /dev/sda). More precisely it is the block device major
3456 * and minor number that is chosen here.
3457 *
3458 * Assume sd_probe is not re-entrant (for time being)
3459 * Also think about sd_probe() and sd_remove() running coincidentally.
3460 **/
3461static int sd_probe(struct device *dev)
3462{
3463 struct scsi_device *sdp = to_scsi_device(dev);
3464 struct scsi_disk *sdkp;
3465 struct gendisk *gd;
3466 int index;
3467 int error;
3468
3469 scsi_autopm_get_device(sdp);
3470 error = -ENODEV;
3471 if (sdp->type != TYPE_DISK &&
3472 sdp->type != TYPE_ZBC &&
3473 sdp->type != TYPE_MOD &&
3474 sdp->type != TYPE_RBC)
3475 goto out;
3476
3477 if (!IS_ENABLED(CONFIG_BLK_DEV_ZONED) && sdp->type == TYPE_ZBC) {
3478 sdev_printk(KERN_WARNING, sdp,
3479 "Unsupported ZBC host-managed device.\n");
3480 goto out;
3481 }
3482
3483 SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
3484 "sd_probe\n"));
3485
3486 error = -ENOMEM;
3487 sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
3488 if (!sdkp)
3489 goto out;
3490
3491 gd = blk_mq_alloc_disk_for_queue(sdp->request_queue,
3492 &sd_bio_compl_lkclass);
3493 if (!gd)
3494 goto out_free;
3495
3496 index = ida_alloc(&sd_index_ida, GFP_KERNEL);
3497 if (index < 0) {
3498 sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n");
3499 goto out_put;
3500 }
3501
3502 error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
3503 if (error) {
3504 sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n");
3505 goto out_free_index;
3506 }
3507
3508 sdkp->device = sdp;
3509 sdkp->disk = gd;
3510 sdkp->index = index;
3511 sdkp->max_retries = SD_MAX_RETRIES;
3512 atomic_set(&sdkp->openers, 0);
3513 atomic_set(&sdkp->device->ioerr_cnt, 0);
3514
3515 if (!sdp->request_queue->rq_timeout) {
3516 if (sdp->type != TYPE_MOD)
3517 blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
3518 else
3519 blk_queue_rq_timeout(sdp->request_queue,
3520 SD_MOD_TIMEOUT);
3521 }
3522
3523 device_initialize(&sdkp->disk_dev);
3524 sdkp->disk_dev.parent = get_device(dev);
3525 sdkp->disk_dev.class = &sd_disk_class;
3526 dev_set_name(&sdkp->disk_dev, "%s", dev_name(dev));
3527
3528 error = device_add(&sdkp->disk_dev);
3529 if (error) {
3530 put_device(&sdkp->disk_dev);
3531 goto out;
3532 }
3533
3534 dev_set_drvdata(dev, sdkp);
3535
3536 gd->major = sd_major((index & 0xf0) >> 4);
3537 gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
3538 gd->minors = SD_MINORS;
3539
3540 gd->fops = &sd_fops;
3541 gd->private_data = sdkp;
3542
3543 /* defaults, until the device tells us otherwise */
3544 sdp->sector_size = 512;
3545 sdkp->capacity = 0;
3546 sdkp->media_present = 1;
3547 sdkp->write_prot = 0;
3548 sdkp->cache_override = 0;
3549 sdkp->WCE = 0;
3550 sdkp->RCD = 0;
3551 sdkp->ATO = 0;
3552 sdkp->first_scan = 1;
3553 sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS;
3554
3555 sd_revalidate_disk(gd);
3556
3557 if (sdp->removable) {
3558 gd->flags |= GENHD_FL_REMOVABLE;
3559 gd->events |= DISK_EVENT_MEDIA_CHANGE;
3560 gd->event_flags = DISK_EVENT_FLAG_POLL | DISK_EVENT_FLAG_UEVENT;
3561 }
3562
3563 blk_pm_runtime_init(sdp->request_queue, dev);
3564 if (sdp->rpm_autosuspend) {
3565 pm_runtime_set_autosuspend_delay(dev,
3566 sdp->host->hostt->rpm_autosuspend_delay);
3567 }
3568
3569 error = device_add_disk(dev, gd, NULL);
3570 if (error) {
3571 put_device(&sdkp->disk_dev);
3572 put_disk(gd);
3573 goto out;
3574 }
3575
3576 if (sdkp->security) {
3577 sdkp->opal_dev = init_opal_dev(sdkp, &sd_sec_submit);
3578 if (sdkp->opal_dev)
3579 sd_printk(KERN_NOTICE, sdkp, "supports TCG Opal\n");
3580 }
3581
3582 sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
3583 sdp->removable ? "removable " : "");
3584 scsi_autopm_put_device(sdp);
3585
3586 return 0;
3587
3588 out_free_index:
3589 ida_free(&sd_index_ida, index);
3590 out_put:
3591 put_disk(gd);
3592 out_free:
3593 kfree(sdkp);
3594 out:
3595 scsi_autopm_put_device(sdp);
3596 return error;
3597}
3598
3599/**
3600 * sd_remove - called whenever a scsi disk (previously recognized by
3601 * sd_probe) is detached from the system. It is called (potentially
3602 * multiple times) during sd module unload.
3603 * @dev: pointer to device object
3604 *
3605 * Note: this function is invoked from the scsi mid-level.
3606 * This function potentially frees up a device name (e.g. /dev/sdc)
3607 * that could be re-used by a subsequent sd_probe().
3608 * This function is not called when the built-in sd driver is "exit-ed".
3609 **/
3610static int sd_remove(struct device *dev)
3611{
3612 struct scsi_disk *sdkp = dev_get_drvdata(dev);
3613
3614 scsi_autopm_get_device(sdkp->device);
3615
3616 device_del(&sdkp->disk_dev);
3617 del_gendisk(sdkp->disk);
3618 sd_shutdown(dev);
3619
3620 put_disk(sdkp->disk);
3621 return 0;
3622}
3623
3624static void scsi_disk_release(struct device *dev)
3625{
3626 struct scsi_disk *sdkp = to_scsi_disk(dev);
3627
3628 ida_free(&sd_index_ida, sdkp->index);
3629 sd_zbc_free_zone_info(sdkp);
3630 put_device(&sdkp->device->sdev_gendev);
3631 free_opal_dev(sdkp->opal_dev);
3632
3633 kfree(sdkp);
3634}
3635
3636static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
3637{
3638 unsigned char cmd[6] = { START_STOP }; /* START_VALID */
3639 struct scsi_sense_hdr sshdr;
3640 struct scsi_device *sdp = sdkp->device;
3641 int res;
3642
3643 if (start)
3644 cmd[4] |= 1; /* START */
3645
3646 if (sdp->start_stop_pwr_cond)
3647 cmd[4] |= start ? 1 << 4 : 3 << 4; /* Active or Standby */
3648
3649 if (!scsi_device_online(sdp))
3650 return -ENODEV;
3651
3652 res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
3653 SD_TIMEOUT, sdkp->max_retries, 0, RQF_PM, NULL);
3654 if (res) {
3655 sd_print_result(sdkp, "Start/Stop Unit failed", res);
3656 if (res > 0 && scsi_sense_valid(&sshdr)) {
3657 sd_print_sense_hdr(sdkp, &sshdr);
3658 /* 0x3a is medium not present */
3659 if (sshdr.asc == 0x3a)
3660 res = 0;
3661 }
3662 }
3663
3664 /* SCSI error codes must not go to the generic layer */
3665 if (res)
3666 return -EIO;
3667
3668 return 0;
3669}
3670
3671/*
3672 * Send a SYNCHRONIZE CACHE instruction down to the device through
3673 * the normal SCSI command structure. Wait for the command to
3674 * complete.
3675 */
3676static void sd_shutdown(struct device *dev)
3677{
3678 struct scsi_disk *sdkp = dev_get_drvdata(dev);
3679
3680 if (!sdkp)
3681 return; /* this can happen */
3682
3683 if (pm_runtime_suspended(dev))
3684 return;
3685
3686 if (sdkp->WCE && sdkp->media_present) {
3687 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
3688 sd_sync_cache(sdkp, NULL);
3689 }
3690
3691 if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
3692 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
3693 sd_start_stop_device(sdkp, 0);
3694 }
3695}
3696
3697static int sd_suspend_common(struct device *dev, bool ignore_stop_errors)
3698{
3699 struct scsi_disk *sdkp = dev_get_drvdata(dev);
3700 struct scsi_sense_hdr sshdr;
3701 int ret = 0;
3702
3703 if (!sdkp) /* E.g.: runtime suspend following sd_remove() */
3704 return 0;
3705
3706 if (sdkp->WCE && sdkp->media_present) {
3707 if (!sdkp->device->silence_suspend)
3708 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
3709 ret = sd_sync_cache(sdkp, &sshdr);
3710
3711 if (ret) {
3712 /* ignore OFFLINE device */
3713 if (ret == -ENODEV)
3714 return 0;
3715
3716 if (!scsi_sense_valid(&sshdr) ||
3717 sshdr.sense_key != ILLEGAL_REQUEST)
3718 return ret;
3719
3720 /*
3721 * sshdr.sense_key == ILLEGAL_REQUEST means this drive
3722 * doesn't support sync. There's not much to do and
3723 * suspend shouldn't fail.
3724 */
3725 ret = 0;
3726 }
3727 }
3728
3729 if (sdkp->device->manage_start_stop) {
3730 if (!sdkp->device->silence_suspend)
3731 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
3732 /* an error is not worth aborting a system sleep */
3733 ret = sd_start_stop_device(sdkp, 0);
3734 if (ignore_stop_errors)
3735 ret = 0;
3736 }
3737
3738 return ret;
3739}
3740
3741static int sd_suspend_system(struct device *dev)
3742{
3743 if (pm_runtime_suspended(dev))
3744 return 0;
3745
3746 return sd_suspend_common(dev, true);
3747}
3748
3749static int sd_suspend_runtime(struct device *dev)
3750{
3751 return sd_suspend_common(dev, false);
3752}
3753
3754static int sd_resume(struct device *dev)
3755{
3756 struct scsi_disk *sdkp = dev_get_drvdata(dev);
3757 int ret;
3758
3759 if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */
3760 return 0;
3761
3762 if (!sdkp->device->manage_start_stop)
3763 return 0;
3764
3765 sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
3766 ret = sd_start_stop_device(sdkp, 1);
3767 if (!ret)
3768 opal_unlock_from_suspend(sdkp->opal_dev);
3769 return ret;
3770}
3771
3772static int sd_resume_system(struct device *dev)
3773{
3774 if (pm_runtime_suspended(dev))
3775 return 0;
3776
3777 return sd_resume(dev);
3778}
3779
3780static int sd_resume_runtime(struct device *dev)
3781{
3782 struct scsi_disk *sdkp = dev_get_drvdata(dev);
3783 struct scsi_device *sdp;
3784
3785 if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */
3786 return 0;
3787
3788 sdp = sdkp->device;
3789
3790 if (sdp->ignore_media_change) {
3791 /* clear the device's sense data */
3792 static const u8 cmd[10] = { REQUEST_SENSE };
3793
3794 if (scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL,
3795 NULL, sdp->request_queue->rq_timeout, 1, 0,
3796 RQF_PM, NULL))
3797 sd_printk(KERN_NOTICE, sdkp,
3798 "Failed to clear sense data\n");
3799 }
3800
3801 return sd_resume(dev);
3802}
3803
3804/**
3805 * init_sd - entry point for this driver (both when built in or when
3806 * a module).
3807 *
3808 * Note: this function registers this driver with the scsi mid-level.
3809 **/
3810static int __init init_sd(void)
3811{
3812 int majors = 0, i, err;
3813
3814 SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
3815
3816 for (i = 0; i < SD_MAJORS; i++) {
3817 if (__register_blkdev(sd_major(i), "sd", sd_default_probe))
3818 continue;
3819 majors++;
3820 }
3821
3822 if (!majors)
3823 return -ENODEV;
3824
3825 err = class_register(&sd_disk_class);
3826 if (err)
3827 goto err_out;
3828
3829 sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
3830 0, 0, NULL);
3831 if (!sd_cdb_cache) {
3832 printk(KERN_ERR "sd: can't init extended cdb cache\n");
3833 err = -ENOMEM;
3834 goto err_out_class;
3835 }
3836
3837 sd_page_pool = mempool_create_page_pool(SD_MEMPOOL_SIZE, 0);
3838 if (!sd_page_pool) {
3839 printk(KERN_ERR "sd: can't init discard page pool\n");
3840 err = -ENOMEM;
3841 goto err_out_cache;
3842 }
3843
3844 err = scsi_register_driver(&sd_template.gendrv);
3845 if (err)
3846 goto err_out_driver;
3847
3848 return 0;
3849
3850err_out_driver:
3851 mempool_destroy(sd_page_pool);
3852
3853err_out_cache:
3854 kmem_cache_destroy(sd_cdb_cache);
3855
3856err_out_class:
3857 class_unregister(&sd_disk_class);
3858err_out:
3859 for (i = 0; i < SD_MAJORS; i++)
3860 unregister_blkdev(sd_major(i), "sd");
3861 return err;
3862}
3863
3864/**
3865 * exit_sd - exit point for this driver (when it is a module).
3866 *
3867 * Note: this function unregisters this driver from the scsi mid-level.
3868 **/
3869static void __exit exit_sd(void)
3870{
3871 int i;
3872
3873 SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
3874
3875 scsi_unregister_driver(&sd_template.gendrv);
3876 mempool_destroy(sd_page_pool);
3877 kmem_cache_destroy(sd_cdb_cache);
3878
3879 class_unregister(&sd_disk_class);
3880
3881 for (i = 0; i < SD_MAJORS; i++)
3882 unregister_blkdev(sd_major(i), "sd");
3883}
3884
3885module_init(init_sd);
3886module_exit(exit_sd);
3887
3888void sd_print_sense_hdr(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
3889{
3890 scsi_print_sense_hdr(sdkp->device,
3891 sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr);
3892}
3893
3894void sd_print_result(const struct scsi_disk *sdkp, const char *msg, int result)
3895{
3896 const char *hb_string = scsi_hostbyte_string(result);
3897
3898 if (hb_string)
3899 sd_printk(KERN_INFO, sdkp,
3900 "%s: Result: hostbyte=%s driverbyte=%s\n", msg,
3901 hb_string ? hb_string : "invalid",
3902 "DRIVER_OK");
3903 else
3904 sd_printk(KERN_INFO, sdkp,
3905 "%s: Result: hostbyte=0x%02x driverbyte=%s\n",
3906 msg, host_byte(result), "DRIVER_OK");
3907}
1/*
2 * sd.c Copyright (C) 1992 Drew Eckhardt
3 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
4 *
5 * Linux scsi disk driver
6 * Initial versions: Drew Eckhardt
7 * Subsequent revisions: Eric Youngdale
8 * Modification history:
9 * - Drew Eckhardt <drew@colorado.edu> original
10 * - Eric Youngdale <eric@andante.org> add scatter-gather, multiple
11 * outstanding request, and other enhancements.
12 * Support loadable low-level scsi drivers.
13 * - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using
14 * eight major numbers.
15 * - Richard Gooch <rgooch@atnf.csiro.au> support devfs.
16 * - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in
17 * sd_init and cleanups.
18 * - Alex Davis <letmein@erols.com> Fix problem where partition info
19 * not being read in sd_open. Fix problem where removable media
20 * could be ejected after sd_open.
21 * - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x
22 * - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox
23 * <willy@debian.org>, Kurt Garloff <garloff@suse.de>:
24 * Support 32k/1M disks.
25 *
26 * Logging policy (needs CONFIG_SCSI_LOGGING defined):
27 * - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
28 * - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
29 * - entering sd_ioctl: SCSI_LOG_IOCTL level 1
30 * - entering other commands: SCSI_LOG_HLQUEUE level 3
31 * Note: when the logging level is set by the user, it must be greater
32 * than the level indicated above to trigger output.
33 */
34
35#include <linux/module.h>
36#include <linux/fs.h>
37#include <linux/kernel.h>
38#include <linux/mm.h>
39#include <linux/bio.h>
40#include <linux/genhd.h>
41#include <linux/hdreg.h>
42#include <linux/errno.h>
43#include <linux/idr.h>
44#include <linux/interrupt.h>
45#include <linux/init.h>
46#include <linux/blkdev.h>
47#include <linux/blkpg.h>
48#include <linux/delay.h>
49#include <linux/mutex.h>
50#include <linux/string_helpers.h>
51#include <linux/async.h>
52#include <linux/slab.h>
53#include <asm/uaccess.h>
54#include <asm/unaligned.h>
55
56#include <scsi/scsi.h>
57#include <scsi/scsi_cmnd.h>
58#include <scsi/scsi_dbg.h>
59#include <scsi/scsi_device.h>
60#include <scsi/scsi_driver.h>
61#include <scsi/scsi_eh.h>
62#include <scsi/scsi_host.h>
63#include <scsi/scsi_ioctl.h>
64#include <scsi/scsicam.h>
65
66#include "sd.h"
67#include "scsi_logging.h"
68
69MODULE_AUTHOR("Eric Youngdale");
70MODULE_DESCRIPTION("SCSI disk (sd) driver");
71MODULE_LICENSE("GPL");
72
73MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
74MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
75MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
76MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
77MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
78MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
79MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
80MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
81MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
82MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
83MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
84MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
85MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
86MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
87MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
88MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
89MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
90MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
91MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
92
93#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
94#define SD_MINORS 16
95#else
96#define SD_MINORS 0
97#endif
98
99static void sd_config_discard(struct scsi_disk *, unsigned int);
100static int sd_revalidate_disk(struct gendisk *);
101static void sd_unlock_native_capacity(struct gendisk *disk);
102static int sd_probe(struct device *);
103static int sd_remove(struct device *);
104static void sd_shutdown(struct device *);
105static int sd_suspend(struct device *, pm_message_t state);
106static int sd_resume(struct device *);
107static void sd_rescan(struct device *);
108static int sd_done(struct scsi_cmnd *);
109static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
110static void scsi_disk_release(struct device *cdev);
111static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
112static void sd_print_result(struct scsi_disk *, int);
113
114static DEFINE_SPINLOCK(sd_index_lock);
115static DEFINE_IDA(sd_index_ida);
116
117/* This semaphore is used to mediate the 0->1 reference get in the
118 * face of object destruction (i.e. we can't allow a get on an
119 * object after last put) */
120static DEFINE_MUTEX(sd_ref_mutex);
121
122static struct kmem_cache *sd_cdb_cache;
123static mempool_t *sd_cdb_pool;
124
125static const char *sd_cache_types[] = {
126 "write through", "none", "write back",
127 "write back, no read (daft)"
128};
129
130static ssize_t
131sd_store_cache_type(struct device *dev, struct device_attribute *attr,
132 const char *buf, size_t count)
133{
134 int i, ct = -1, rcd, wce, sp;
135 struct scsi_disk *sdkp = to_scsi_disk(dev);
136 struct scsi_device *sdp = sdkp->device;
137 char buffer[64];
138 char *buffer_data;
139 struct scsi_mode_data data;
140 struct scsi_sense_hdr sshdr;
141 int len;
142
143 if (sdp->type != TYPE_DISK)
144 /* no cache control on RBC devices; theoretically they
145 * can do it, but there's probably so many exceptions
146 * it's not worth the risk */
147 return -EINVAL;
148
149 for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
150 len = strlen(sd_cache_types[i]);
151 if (strncmp(sd_cache_types[i], buf, len) == 0 &&
152 buf[len] == '\n') {
153 ct = i;
154 break;
155 }
156 }
157 if (ct < 0)
158 return -EINVAL;
159 rcd = ct & 0x01 ? 1 : 0;
160 wce = ct & 0x02 ? 1 : 0;
161 if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
162 SD_MAX_RETRIES, &data, NULL))
163 return -EINVAL;
164 len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
165 data.block_descriptor_length);
166 buffer_data = buffer + data.header_length +
167 data.block_descriptor_length;
168 buffer_data[2] &= ~0x05;
169 buffer_data[2] |= wce << 2 | rcd;
170 sp = buffer_data[0] & 0x80 ? 1 : 0;
171
172 if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
173 SD_MAX_RETRIES, &data, &sshdr)) {
174 if (scsi_sense_valid(&sshdr))
175 sd_print_sense_hdr(sdkp, &sshdr);
176 return -EINVAL;
177 }
178 revalidate_disk(sdkp->disk);
179 return count;
180}
181
182static ssize_t
183sd_store_manage_start_stop(struct device *dev, struct device_attribute *attr,
184 const char *buf, size_t count)
185{
186 struct scsi_disk *sdkp = to_scsi_disk(dev);
187 struct scsi_device *sdp = sdkp->device;
188
189 if (!capable(CAP_SYS_ADMIN))
190 return -EACCES;
191
192 sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
193
194 return count;
195}
196
197static ssize_t
198sd_store_allow_restart(struct device *dev, struct device_attribute *attr,
199 const char *buf, size_t count)
200{
201 struct scsi_disk *sdkp = to_scsi_disk(dev);
202 struct scsi_device *sdp = sdkp->device;
203
204 if (!capable(CAP_SYS_ADMIN))
205 return -EACCES;
206
207 if (sdp->type != TYPE_DISK)
208 return -EINVAL;
209
210 sdp->allow_restart = simple_strtoul(buf, NULL, 10);
211
212 return count;
213}
214
215static ssize_t
216sd_show_cache_type(struct device *dev, struct device_attribute *attr,
217 char *buf)
218{
219 struct scsi_disk *sdkp = to_scsi_disk(dev);
220 int ct = sdkp->RCD + 2*sdkp->WCE;
221
222 return snprintf(buf, 40, "%s\n", sd_cache_types[ct]);
223}
224
225static ssize_t
226sd_show_fua(struct device *dev, struct device_attribute *attr, char *buf)
227{
228 struct scsi_disk *sdkp = to_scsi_disk(dev);
229
230 return snprintf(buf, 20, "%u\n", sdkp->DPOFUA);
231}
232
233static ssize_t
234sd_show_manage_start_stop(struct device *dev, struct device_attribute *attr,
235 char *buf)
236{
237 struct scsi_disk *sdkp = to_scsi_disk(dev);
238 struct scsi_device *sdp = sdkp->device;
239
240 return snprintf(buf, 20, "%u\n", sdp->manage_start_stop);
241}
242
243static ssize_t
244sd_show_allow_restart(struct device *dev, struct device_attribute *attr,
245 char *buf)
246{
247 struct scsi_disk *sdkp = to_scsi_disk(dev);
248
249 return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart);
250}
251
252static ssize_t
253sd_show_protection_type(struct device *dev, struct device_attribute *attr,
254 char *buf)
255{
256 struct scsi_disk *sdkp = to_scsi_disk(dev);
257
258 return snprintf(buf, 20, "%u\n", sdkp->protection_type);
259}
260
261static ssize_t
262sd_show_protection_mode(struct device *dev, struct device_attribute *attr,
263 char *buf)
264{
265 struct scsi_disk *sdkp = to_scsi_disk(dev);
266 struct scsi_device *sdp = sdkp->device;
267 unsigned int dif, dix;
268
269 dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
270 dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type);
271
272 if (!dix && scsi_host_dix_capable(sdp->host, SD_DIF_TYPE0_PROTECTION)) {
273 dif = 0;
274 dix = 1;
275 }
276
277 if (!dif && !dix)
278 return snprintf(buf, 20, "none\n");
279
280 return snprintf(buf, 20, "%s%u\n", dix ? "dix" : "dif", dif);
281}
282
283static ssize_t
284sd_show_app_tag_own(struct device *dev, struct device_attribute *attr,
285 char *buf)
286{
287 struct scsi_disk *sdkp = to_scsi_disk(dev);
288
289 return snprintf(buf, 20, "%u\n", sdkp->ATO);
290}
291
292static ssize_t
293sd_show_thin_provisioning(struct device *dev, struct device_attribute *attr,
294 char *buf)
295{
296 struct scsi_disk *sdkp = to_scsi_disk(dev);
297
298 return snprintf(buf, 20, "%u\n", sdkp->lbpme);
299}
300
301static const char *lbp_mode[] = {
302 [SD_LBP_FULL] = "full",
303 [SD_LBP_UNMAP] = "unmap",
304 [SD_LBP_WS16] = "writesame_16",
305 [SD_LBP_WS10] = "writesame_10",
306 [SD_LBP_ZERO] = "writesame_zero",
307 [SD_LBP_DISABLE] = "disabled",
308};
309
310static ssize_t
311sd_show_provisioning_mode(struct device *dev, struct device_attribute *attr,
312 char *buf)
313{
314 struct scsi_disk *sdkp = to_scsi_disk(dev);
315
316 return snprintf(buf, 20, "%s\n", lbp_mode[sdkp->provisioning_mode]);
317}
318
319static ssize_t
320sd_store_provisioning_mode(struct device *dev, struct device_attribute *attr,
321 const char *buf, size_t count)
322{
323 struct scsi_disk *sdkp = to_scsi_disk(dev);
324 struct scsi_device *sdp = sdkp->device;
325
326 if (!capable(CAP_SYS_ADMIN))
327 return -EACCES;
328
329 if (sdp->type != TYPE_DISK)
330 return -EINVAL;
331
332 if (!strncmp(buf, lbp_mode[SD_LBP_UNMAP], 20))
333 sd_config_discard(sdkp, SD_LBP_UNMAP);
334 else if (!strncmp(buf, lbp_mode[SD_LBP_WS16], 20))
335 sd_config_discard(sdkp, SD_LBP_WS16);
336 else if (!strncmp(buf, lbp_mode[SD_LBP_WS10], 20))
337 sd_config_discard(sdkp, SD_LBP_WS10);
338 else if (!strncmp(buf, lbp_mode[SD_LBP_ZERO], 20))
339 sd_config_discard(sdkp, SD_LBP_ZERO);
340 else if (!strncmp(buf, lbp_mode[SD_LBP_DISABLE], 20))
341 sd_config_discard(sdkp, SD_LBP_DISABLE);
342 else
343 return -EINVAL;
344
345 return count;
346}
347
348static struct device_attribute sd_disk_attrs[] = {
349 __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
350 sd_store_cache_type),
351 __ATTR(FUA, S_IRUGO, sd_show_fua, NULL),
352 __ATTR(allow_restart, S_IRUGO|S_IWUSR, sd_show_allow_restart,
353 sd_store_allow_restart),
354 __ATTR(manage_start_stop, S_IRUGO|S_IWUSR, sd_show_manage_start_stop,
355 sd_store_manage_start_stop),
356 __ATTR(protection_type, S_IRUGO, sd_show_protection_type, NULL),
357 __ATTR(protection_mode, S_IRUGO, sd_show_protection_mode, NULL),
358 __ATTR(app_tag_own, S_IRUGO, sd_show_app_tag_own, NULL),
359 __ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL),
360 __ATTR(provisioning_mode, S_IRUGO|S_IWUSR, sd_show_provisioning_mode,
361 sd_store_provisioning_mode),
362 __ATTR_NULL,
363};
364
365static struct class sd_disk_class = {
366 .name = "scsi_disk",
367 .owner = THIS_MODULE,
368 .dev_release = scsi_disk_release,
369 .dev_attrs = sd_disk_attrs,
370};
371
372static struct scsi_driver sd_template = {
373 .owner = THIS_MODULE,
374 .gendrv = {
375 .name = "sd",
376 .probe = sd_probe,
377 .remove = sd_remove,
378 .suspend = sd_suspend,
379 .resume = sd_resume,
380 .shutdown = sd_shutdown,
381 },
382 .rescan = sd_rescan,
383 .done = sd_done,
384};
385
386/*
387 * Device no to disk mapping:
388 *
389 * major disc2 disc p1
390 * |............|.............|....|....| <- dev_t
391 * 31 20 19 8 7 4 3 0
392 *
393 * Inside a major, we have 16k disks, however mapped non-
394 * contiguously. The first 16 disks are for major0, the next
395 * ones with major1, ... Disk 256 is for major0 again, disk 272
396 * for major1, ...
397 * As we stay compatible with our numbering scheme, we can reuse
398 * the well-know SCSI majors 8, 65--71, 136--143.
399 */
400static int sd_major(int major_idx)
401{
402 switch (major_idx) {
403 case 0:
404 return SCSI_DISK0_MAJOR;
405 case 1 ... 7:
406 return SCSI_DISK1_MAJOR + major_idx - 1;
407 case 8 ... 15:
408 return SCSI_DISK8_MAJOR + major_idx - 8;
409 default:
410 BUG();
411 return 0; /* shut up gcc */
412 }
413}
414
415static struct scsi_disk *__scsi_disk_get(struct gendisk *disk)
416{
417 struct scsi_disk *sdkp = NULL;
418
419 if (disk->private_data) {
420 sdkp = scsi_disk(disk);
421 if (scsi_device_get(sdkp->device) == 0)
422 get_device(&sdkp->dev);
423 else
424 sdkp = NULL;
425 }
426 return sdkp;
427}
428
429static struct scsi_disk *scsi_disk_get(struct gendisk *disk)
430{
431 struct scsi_disk *sdkp;
432
433 mutex_lock(&sd_ref_mutex);
434 sdkp = __scsi_disk_get(disk);
435 mutex_unlock(&sd_ref_mutex);
436 return sdkp;
437}
438
439static struct scsi_disk *scsi_disk_get_from_dev(struct device *dev)
440{
441 struct scsi_disk *sdkp;
442
443 mutex_lock(&sd_ref_mutex);
444 sdkp = dev_get_drvdata(dev);
445 if (sdkp)
446 sdkp = __scsi_disk_get(sdkp->disk);
447 mutex_unlock(&sd_ref_mutex);
448 return sdkp;
449}
450
451static void scsi_disk_put(struct scsi_disk *sdkp)
452{
453 struct scsi_device *sdev = sdkp->device;
454
455 mutex_lock(&sd_ref_mutex);
456 put_device(&sdkp->dev);
457 scsi_device_put(sdev);
458 mutex_unlock(&sd_ref_mutex);
459}
460
461static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif)
462{
463 unsigned int prot_op = SCSI_PROT_NORMAL;
464 unsigned int dix = scsi_prot_sg_count(scmd);
465
466 if (scmd->sc_data_direction == DMA_FROM_DEVICE) {
467 if (dif && dix)
468 prot_op = SCSI_PROT_READ_PASS;
469 else if (dif && !dix)
470 prot_op = SCSI_PROT_READ_STRIP;
471 else if (!dif && dix)
472 prot_op = SCSI_PROT_READ_INSERT;
473 } else {
474 if (dif && dix)
475 prot_op = SCSI_PROT_WRITE_PASS;
476 else if (dif && !dix)
477 prot_op = SCSI_PROT_WRITE_INSERT;
478 else if (!dif && dix)
479 prot_op = SCSI_PROT_WRITE_STRIP;
480 }
481
482 scsi_set_prot_op(scmd, prot_op);
483 scsi_set_prot_type(scmd, dif);
484}
485
486static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
487{
488 struct request_queue *q = sdkp->disk->queue;
489 unsigned int logical_block_size = sdkp->device->sector_size;
490 unsigned int max_blocks = 0;
491
492 q->limits.discard_zeroes_data = sdkp->lbprz;
493 q->limits.discard_alignment = sdkp->unmap_alignment *
494 logical_block_size;
495 q->limits.discard_granularity =
496 max(sdkp->physical_block_size,
497 sdkp->unmap_granularity * logical_block_size);
498
499 switch (mode) {
500
501 case SD_LBP_DISABLE:
502 q->limits.max_discard_sectors = 0;
503 queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
504 return;
505
506 case SD_LBP_UNMAP:
507 max_blocks = min_not_zero(sdkp->max_unmap_blocks, 0xffffffff);
508 break;
509
510 case SD_LBP_WS16:
511 max_blocks = min_not_zero(sdkp->max_ws_blocks, 0xffffffff);
512 break;
513
514 case SD_LBP_WS10:
515 max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff);
516 break;
517
518 case SD_LBP_ZERO:
519 max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff);
520 q->limits.discard_zeroes_data = 1;
521 break;
522 }
523
524 q->limits.max_discard_sectors = max_blocks * (logical_block_size >> 9);
525 queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
526
527 sdkp->provisioning_mode = mode;
528}
529
530/**
531 * scsi_setup_discard_cmnd - unmap blocks on thinly provisioned device
532 * @sdp: scsi device to operate one
533 * @rq: Request to prepare
534 *
535 * Will issue either UNMAP or WRITE SAME(16) depending on preference
536 * indicated by target device.
537 **/
538static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
539{
540 struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
541 struct bio *bio = rq->bio;
542 sector_t sector = bio->bi_sector;
543 unsigned int nr_sectors = bio_sectors(bio);
544 unsigned int len;
545 int ret;
546 char *buf;
547 struct page *page;
548
549 if (sdkp->device->sector_size == 4096) {
550 sector >>= 3;
551 nr_sectors >>= 3;
552 }
553
554 rq->timeout = SD_TIMEOUT;
555
556 memset(rq->cmd, 0, rq->cmd_len);
557
558 page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
559 if (!page)
560 return BLKPREP_DEFER;
561
562 switch (sdkp->provisioning_mode) {
563 case SD_LBP_UNMAP:
564 buf = page_address(page);
565
566 rq->cmd_len = 10;
567 rq->cmd[0] = UNMAP;
568 rq->cmd[8] = 24;
569
570 put_unaligned_be16(6 + 16, &buf[0]);
571 put_unaligned_be16(16, &buf[2]);
572 put_unaligned_be64(sector, &buf[8]);
573 put_unaligned_be32(nr_sectors, &buf[16]);
574
575 len = 24;
576 break;
577
578 case SD_LBP_WS16:
579 rq->cmd_len = 16;
580 rq->cmd[0] = WRITE_SAME_16;
581 rq->cmd[1] = 0x8; /* UNMAP */
582 put_unaligned_be64(sector, &rq->cmd[2]);
583 put_unaligned_be32(nr_sectors, &rq->cmd[10]);
584
585 len = sdkp->device->sector_size;
586 break;
587
588 case SD_LBP_WS10:
589 case SD_LBP_ZERO:
590 rq->cmd_len = 10;
591 rq->cmd[0] = WRITE_SAME;
592 if (sdkp->provisioning_mode == SD_LBP_WS10)
593 rq->cmd[1] = 0x8; /* UNMAP */
594 put_unaligned_be32(sector, &rq->cmd[2]);
595 put_unaligned_be16(nr_sectors, &rq->cmd[7]);
596
597 len = sdkp->device->sector_size;
598 break;
599
600 default:
601 ret = BLKPREP_KILL;
602 goto out;
603 }
604
605 blk_add_request_payload(rq, page, len);
606 ret = scsi_setup_blk_pc_cmnd(sdp, rq);
607 rq->buffer = page_address(page);
608
609out:
610 if (ret != BLKPREP_OK) {
611 __free_page(page);
612 rq->buffer = NULL;
613 }
614 return ret;
615}
616
617static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
618{
619 rq->timeout = SD_FLUSH_TIMEOUT;
620 rq->retries = SD_MAX_RETRIES;
621 rq->cmd[0] = SYNCHRONIZE_CACHE;
622 rq->cmd_len = 10;
623
624 return scsi_setup_blk_pc_cmnd(sdp, rq);
625}
626
627static void sd_unprep_fn(struct request_queue *q, struct request *rq)
628{
629 if (rq->cmd_flags & REQ_DISCARD) {
630 free_page((unsigned long)rq->buffer);
631 rq->buffer = NULL;
632 }
633}
634
635/**
636 * sd_init_command - build a scsi (read or write) command from
637 * information in the request structure.
638 * @SCpnt: pointer to mid-level's per scsi command structure that
639 * contains request and into which the scsi command is written
640 *
641 * Returns 1 if successful and 0 if error (or cannot be done now).
642 **/
643static int sd_prep_fn(struct request_queue *q, struct request *rq)
644{
645 struct scsi_cmnd *SCpnt;
646 struct scsi_device *sdp = q->queuedata;
647 struct gendisk *disk = rq->rq_disk;
648 struct scsi_disk *sdkp;
649 sector_t block = blk_rq_pos(rq);
650 sector_t threshold;
651 unsigned int this_count = blk_rq_sectors(rq);
652 int ret, host_dif;
653 unsigned char protect;
654
655 /*
656 * Discard request come in as REQ_TYPE_FS but we turn them into
657 * block PC requests to make life easier.
658 */
659 if (rq->cmd_flags & REQ_DISCARD) {
660 ret = scsi_setup_discard_cmnd(sdp, rq);
661 goto out;
662 } else if (rq->cmd_flags & REQ_FLUSH) {
663 ret = scsi_setup_flush_cmnd(sdp, rq);
664 goto out;
665 } else if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
666 ret = scsi_setup_blk_pc_cmnd(sdp, rq);
667 goto out;
668 } else if (rq->cmd_type != REQ_TYPE_FS) {
669 ret = BLKPREP_KILL;
670 goto out;
671 }
672 ret = scsi_setup_fs_cmnd(sdp, rq);
673 if (ret != BLKPREP_OK)
674 goto out;
675 SCpnt = rq->special;
676 sdkp = scsi_disk(disk);
677
678 /* from here on until we're complete, any goto out
679 * is used for a killable error condition */
680 ret = BLKPREP_KILL;
681
682 SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
683 "sd_init_command: block=%llu, "
684 "count=%d\n",
685 (unsigned long long)block,
686 this_count));
687
688 if (!sdp || !scsi_device_online(sdp) ||
689 block + blk_rq_sectors(rq) > get_capacity(disk)) {
690 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
691 "Finishing %u sectors\n",
692 blk_rq_sectors(rq)));
693 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
694 "Retry with 0x%p\n", SCpnt));
695 goto out;
696 }
697
698 if (sdp->changed) {
699 /*
700 * quietly refuse to do anything to a changed disc until
701 * the changed bit has been reset
702 */
703 /* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */
704 goto out;
705 }
706
707 /*
708 * Some SD card readers can't handle multi-sector accesses which touch
709 * the last one or two hardware sectors. Split accesses as needed.
710 */
711 threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS *
712 (sdp->sector_size / 512);
713
714 if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) {
715 if (block < threshold) {
716 /* Access up to the threshold but not beyond */
717 this_count = threshold - block;
718 } else {
719 /* Access only a single hardware sector */
720 this_count = sdp->sector_size / 512;
721 }
722 }
723
724 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
725 (unsigned long long)block));
726
727 /*
728 * If we have a 1K hardware sectorsize, prevent access to single
729 * 512 byte sectors. In theory we could handle this - in fact
730 * the scsi cdrom driver must be able to handle this because
731 * we typically use 1K blocksizes, and cdroms typically have
732 * 2K hardware sectorsizes. Of course, things are simpler
733 * with the cdrom, since it is read-only. For performance
734 * reasons, the filesystems should be able to handle this
735 * and not force the scsi disk driver to use bounce buffers
736 * for this.
737 */
738 if (sdp->sector_size == 1024) {
739 if ((block & 1) || (blk_rq_sectors(rq) & 1)) {
740 scmd_printk(KERN_ERR, SCpnt,
741 "Bad block number requested\n");
742 goto out;
743 } else {
744 block = block >> 1;
745 this_count = this_count >> 1;
746 }
747 }
748 if (sdp->sector_size == 2048) {
749 if ((block & 3) || (blk_rq_sectors(rq) & 3)) {
750 scmd_printk(KERN_ERR, SCpnt,
751 "Bad block number requested\n");
752 goto out;
753 } else {
754 block = block >> 2;
755 this_count = this_count >> 2;
756 }
757 }
758 if (sdp->sector_size == 4096) {
759 if ((block & 7) || (blk_rq_sectors(rq) & 7)) {
760 scmd_printk(KERN_ERR, SCpnt,
761 "Bad block number requested\n");
762 goto out;
763 } else {
764 block = block >> 3;
765 this_count = this_count >> 3;
766 }
767 }
768 if (rq_data_dir(rq) == WRITE) {
769 if (!sdp->writeable) {
770 goto out;
771 }
772 SCpnt->cmnd[0] = WRITE_6;
773 SCpnt->sc_data_direction = DMA_TO_DEVICE;
774
775 if (blk_integrity_rq(rq) &&
776 sd_dif_prepare(rq, block, sdp->sector_size) == -EIO)
777 goto out;
778
779 } else if (rq_data_dir(rq) == READ) {
780 SCpnt->cmnd[0] = READ_6;
781 SCpnt->sc_data_direction = DMA_FROM_DEVICE;
782 } else {
783 scmd_printk(KERN_ERR, SCpnt, "Unknown command %x\n", rq->cmd_flags);
784 goto out;
785 }
786
787 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
788 "%s %d/%u 512 byte blocks.\n",
789 (rq_data_dir(rq) == WRITE) ?
790 "writing" : "reading", this_count,
791 blk_rq_sectors(rq)));
792
793 /* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
794 host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
795 if (host_dif)
796 protect = 1 << 5;
797 else
798 protect = 0;
799
800 if (host_dif == SD_DIF_TYPE2_PROTECTION) {
801 SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
802
803 if (unlikely(SCpnt->cmnd == NULL)) {
804 ret = BLKPREP_DEFER;
805 goto out;
806 }
807
808 SCpnt->cmd_len = SD_EXT_CDB_SIZE;
809 memset(SCpnt->cmnd, 0, SCpnt->cmd_len);
810 SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
811 SCpnt->cmnd[7] = 0x18;
812 SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
813 SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
814
815 /* LBA */
816 SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
817 SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
818 SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
819 SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
820 SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff;
821 SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff;
822 SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff;
823 SCpnt->cmnd[19] = (unsigned char) block & 0xff;
824
825 /* Expected Indirect LBA */
826 SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff;
827 SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff;
828 SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff;
829 SCpnt->cmnd[23] = (unsigned char) block & 0xff;
830
831 /* Transfer length */
832 SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff;
833 SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
834 SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
835 SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
836 } else if (block > 0xffffffff) {
837 SCpnt->cmnd[0] += READ_16 - READ_6;
838 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
839 SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
840 SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
841 SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
842 SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
843 SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff;
844 SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff;
845 SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff;
846 SCpnt->cmnd[9] = (unsigned char) block & 0xff;
847 SCpnt->cmnd[10] = (unsigned char) (this_count >> 24) & 0xff;
848 SCpnt->cmnd[11] = (unsigned char) (this_count >> 16) & 0xff;
849 SCpnt->cmnd[12] = (unsigned char) (this_count >> 8) & 0xff;
850 SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
851 SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
852 } else if ((this_count > 0xff) || (block > 0x1fffff) ||
853 scsi_device_protection(SCpnt->device) ||
854 SCpnt->device->use_10_for_rw) {
855 if (this_count > 0xffff)
856 this_count = 0xffff;
857
858 SCpnt->cmnd[0] += READ_10 - READ_6;
859 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
860 SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
861 SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
862 SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
863 SCpnt->cmnd[5] = (unsigned char) block & 0xff;
864 SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
865 SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
866 SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
867 } else {
868 if (unlikely(rq->cmd_flags & REQ_FUA)) {
869 /*
870 * This happens only if this drive failed
871 * 10byte rw command with ILLEGAL_REQUEST
872 * during operation and thus turned off
873 * use_10_for_rw.
874 */
875 scmd_printk(KERN_ERR, SCpnt,
876 "FUA write on READ/WRITE(6) drive\n");
877 goto out;
878 }
879
880 SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f);
881 SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff);
882 SCpnt->cmnd[3] = (unsigned char) block & 0xff;
883 SCpnt->cmnd[4] = (unsigned char) this_count;
884 SCpnt->cmnd[5] = 0;
885 }
886 SCpnt->sdb.length = this_count * sdp->sector_size;
887
888 /* If DIF or DIX is enabled, tell HBA how to handle request */
889 if (host_dif || scsi_prot_sg_count(SCpnt))
890 sd_prot_op(SCpnt, host_dif);
891
892 /*
893 * We shouldn't disconnect in the middle of a sector, so with a dumb
894 * host adapter, it's safe to assume that we can at least transfer
895 * this many bytes between each connect / disconnect.
896 */
897 SCpnt->transfersize = sdp->sector_size;
898 SCpnt->underflow = this_count << 9;
899 SCpnt->allowed = SD_MAX_RETRIES;
900
901 /*
902 * This indicates that the command is ready from our end to be
903 * queued.
904 */
905 ret = BLKPREP_OK;
906 out:
907 return scsi_prep_return(q, rq, ret);
908}
909
910/**
911 * sd_open - open a scsi disk device
912 * @inode: only i_rdev member may be used
913 * @filp: only f_mode and f_flags may be used
914 *
915 * Returns 0 if successful. Returns a negated errno value in case
916 * of error.
917 *
918 * Note: This can be called from a user context (e.g. fsck(1) )
919 * or from within the kernel (e.g. as a result of a mount(1) ).
920 * In the latter case @inode and @filp carry an abridged amount
921 * of information as noted above.
922 *
923 * Locking: called with bdev->bd_mutex held.
924 **/
925static int sd_open(struct block_device *bdev, fmode_t mode)
926{
927 struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk);
928 struct scsi_device *sdev;
929 int retval;
930
931 if (!sdkp)
932 return -ENXIO;
933
934 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
935
936 sdev = sdkp->device;
937
938 retval = scsi_autopm_get_device(sdev);
939 if (retval)
940 goto error_autopm;
941
942 /*
943 * If the device is in error recovery, wait until it is done.
944 * If the device is offline, then disallow any access to it.
945 */
946 retval = -ENXIO;
947 if (!scsi_block_when_processing_errors(sdev))
948 goto error_out;
949
950 if (sdev->removable || sdkp->write_prot)
951 check_disk_change(bdev);
952
953 /*
954 * If the drive is empty, just let the open fail.
955 */
956 retval = -ENOMEDIUM;
957 if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY))
958 goto error_out;
959
960 /*
961 * If the device has the write protect tab set, have the open fail
962 * if the user expects to be able to write to the thing.
963 */
964 retval = -EROFS;
965 if (sdkp->write_prot && (mode & FMODE_WRITE))
966 goto error_out;
967
968 /*
969 * It is possible that the disk changing stuff resulted in
970 * the device being taken offline. If this is the case,
971 * report this to the user, and don't pretend that the
972 * open actually succeeded.
973 */
974 retval = -ENXIO;
975 if (!scsi_device_online(sdev))
976 goto error_out;
977
978 if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
979 if (scsi_block_when_processing_errors(sdev))
980 scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
981 }
982
983 return 0;
984
985error_out:
986 scsi_autopm_put_device(sdev);
987error_autopm:
988 scsi_disk_put(sdkp);
989 return retval;
990}
991
992/**
993 * sd_release - invoked when the (last) close(2) is called on this
994 * scsi disk.
995 * @inode: only i_rdev member may be used
996 * @filp: only f_mode and f_flags may be used
997 *
998 * Returns 0.
999 *
1000 * Note: may block (uninterruptible) if error recovery is underway
1001 * on this disk.
1002 *
1003 * Locking: called with bdev->bd_mutex held.
1004 **/
1005static int sd_release(struct gendisk *disk, fmode_t mode)
1006{
1007 struct scsi_disk *sdkp = scsi_disk(disk);
1008 struct scsi_device *sdev = sdkp->device;
1009
1010 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
1011
1012 if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) {
1013 if (scsi_block_when_processing_errors(sdev))
1014 scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
1015 }
1016
1017 /*
1018 * XXX and what if there are packets in flight and this close()
1019 * XXX is followed by a "rmmod sd_mod"?
1020 */
1021
1022 scsi_autopm_put_device(sdev);
1023 scsi_disk_put(sdkp);
1024 return 0;
1025}
1026
1027static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1028{
1029 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1030 struct scsi_device *sdp = sdkp->device;
1031 struct Scsi_Host *host = sdp->host;
1032 int diskinfo[4];
1033
1034 /* default to most commonly used values */
1035 diskinfo[0] = 0x40; /* 1 << 6 */
1036 diskinfo[1] = 0x20; /* 1 << 5 */
1037 diskinfo[2] = sdkp->capacity >> 11;
1038
1039 /* override with calculated, extended default, or driver values */
1040 if (host->hostt->bios_param)
1041 host->hostt->bios_param(sdp, bdev, sdkp->capacity, diskinfo);
1042 else
1043 scsicam_bios_param(bdev, sdkp->capacity, diskinfo);
1044
1045 geo->heads = diskinfo[0];
1046 geo->sectors = diskinfo[1];
1047 geo->cylinders = diskinfo[2];
1048 return 0;
1049}
1050
1051/**
1052 * sd_ioctl - process an ioctl
1053 * @inode: only i_rdev/i_bdev members may be used
1054 * @filp: only f_mode and f_flags may be used
1055 * @cmd: ioctl command number
1056 * @arg: this is third argument given to ioctl(2) system call.
1057 * Often contains a pointer.
1058 *
1059 * Returns 0 if successful (some ioctls return positive numbers on
1060 * success as well). Returns a negated errno value in case of error.
1061 *
1062 * Note: most ioctls are forward onto the block subsystem or further
1063 * down in the scsi subsystem.
1064 **/
1065static int sd_ioctl(struct block_device *bdev, fmode_t mode,
1066 unsigned int cmd, unsigned long arg)
1067{
1068 struct gendisk *disk = bdev->bd_disk;
1069 struct scsi_device *sdp = scsi_disk(disk)->device;
1070 void __user *p = (void __user *)arg;
1071 int error;
1072
1073 SCSI_LOG_IOCTL(1, printk("sd_ioctl: disk=%s, cmd=0x%x\n",
1074 disk->disk_name, cmd));
1075
1076 /*
1077 * If we are in the middle of error recovery, don't let anyone
1078 * else try and use this device. Also, if error recovery fails, it
1079 * may try and take the device offline, in which case all further
1080 * access to the device is prohibited.
1081 */
1082 error = scsi_nonblockable_ioctl(sdp, cmd, p,
1083 (mode & FMODE_NDELAY) != 0);
1084 if (!scsi_block_when_processing_errors(sdp) || !error)
1085 goto out;
1086
1087 /*
1088 * Send SCSI addressing ioctls directly to mid level, send other
1089 * ioctls to block level and then onto mid level if they can't be
1090 * resolved.
1091 */
1092 switch (cmd) {
1093 case SCSI_IOCTL_GET_IDLUN:
1094 case SCSI_IOCTL_GET_BUS_NUMBER:
1095 error = scsi_ioctl(sdp, cmd, p);
1096 break;
1097 default:
1098 error = scsi_cmd_ioctl(disk->queue, disk, mode, cmd, p);
1099 if (error != -ENOTTY)
1100 break;
1101 error = scsi_ioctl(sdp, cmd, p);
1102 break;
1103 }
1104out:
1105 return error;
1106}
1107
1108static void set_media_not_present(struct scsi_disk *sdkp)
1109{
1110 if (sdkp->media_present)
1111 sdkp->device->changed = 1;
1112
1113 if (sdkp->device->removable) {
1114 sdkp->media_present = 0;
1115 sdkp->capacity = 0;
1116 }
1117}
1118
1119static int media_not_present(struct scsi_disk *sdkp,
1120 struct scsi_sense_hdr *sshdr)
1121{
1122 if (!scsi_sense_valid(sshdr))
1123 return 0;
1124
1125 /* not invoked for commands that could return deferred errors */
1126 switch (sshdr->sense_key) {
1127 case UNIT_ATTENTION:
1128 case NOT_READY:
1129 /* medium not present */
1130 if (sshdr->asc == 0x3A) {
1131 set_media_not_present(sdkp);
1132 return 1;
1133 }
1134 }
1135 return 0;
1136}
1137
1138/**
1139 * sd_check_events - check media events
1140 * @disk: kernel device descriptor
1141 * @clearing: disk events currently being cleared
1142 *
1143 * Returns mask of DISK_EVENT_*.
1144 *
1145 * Note: this function is invoked from the block subsystem.
1146 **/
1147static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
1148{
1149 struct scsi_disk *sdkp = scsi_disk(disk);
1150 struct scsi_device *sdp = sdkp->device;
1151 struct scsi_sense_hdr *sshdr = NULL;
1152 int retval;
1153
1154 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
1155
1156 /*
1157 * If the device is offline, don't send any commands - just pretend as
1158 * if the command failed. If the device ever comes back online, we
1159 * can deal with it then. It is only because of unrecoverable errors
1160 * that we would ever take a device offline in the first place.
1161 */
1162 if (!scsi_device_online(sdp)) {
1163 set_media_not_present(sdkp);
1164 goto out;
1165 }
1166
1167 /*
1168 * Using TEST_UNIT_READY enables differentiation between drive with
1169 * no cartridge loaded - NOT READY, drive with changed cartridge -
1170 * UNIT ATTENTION, or with same cartridge - GOOD STATUS.
1171 *
1172 * Drives that auto spin down. eg iomega jaz 1G, will be started
1173 * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
1174 * sd_revalidate() is called.
1175 */
1176 retval = -ENODEV;
1177
1178 if (scsi_block_when_processing_errors(sdp)) {
1179 sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
1180 retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
1181 sshdr);
1182 }
1183
1184 /* failed to execute TUR, assume media not present */
1185 if (host_byte(retval)) {
1186 set_media_not_present(sdkp);
1187 goto out;
1188 }
1189
1190 if (media_not_present(sdkp, sshdr))
1191 goto out;
1192
1193 /*
1194 * For removable scsi disk we have to recognise the presence
1195 * of a disk in the drive.
1196 */
1197 if (!sdkp->media_present)
1198 sdp->changed = 1;
1199 sdkp->media_present = 1;
1200out:
1201 /*
1202 * sdp->changed is set under the following conditions:
1203 *
1204 * Medium present state has changed in either direction.
1205 * Device has indicated UNIT_ATTENTION.
1206 */
1207 kfree(sshdr);
1208 retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
1209 sdp->changed = 0;
1210 return retval;
1211}
1212
1213static int sd_sync_cache(struct scsi_disk *sdkp)
1214{
1215 int retries, res;
1216 struct scsi_device *sdp = sdkp->device;
1217 struct scsi_sense_hdr sshdr;
1218
1219 if (!scsi_device_online(sdp))
1220 return -ENODEV;
1221
1222
1223 for (retries = 3; retries > 0; --retries) {
1224 unsigned char cmd[10] = { 0 };
1225
1226 cmd[0] = SYNCHRONIZE_CACHE;
1227 /*
1228 * Leave the rest of the command zero to indicate
1229 * flush everything.
1230 */
1231 res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
1232 SD_FLUSH_TIMEOUT, SD_MAX_RETRIES, NULL);
1233 if (res == 0)
1234 break;
1235 }
1236
1237 if (res) {
1238 sd_print_result(sdkp, res);
1239 if (driver_byte(res) & DRIVER_SENSE)
1240 sd_print_sense_hdr(sdkp, &sshdr);
1241 }
1242
1243 if (res)
1244 return -EIO;
1245 return 0;
1246}
1247
1248static void sd_rescan(struct device *dev)
1249{
1250 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
1251
1252 if (sdkp) {
1253 revalidate_disk(sdkp->disk);
1254 scsi_disk_put(sdkp);
1255 }
1256}
1257
1258
1259#ifdef CONFIG_COMPAT
1260/*
1261 * This gets directly called from VFS. When the ioctl
1262 * is not recognized we go back to the other translation paths.
1263 */
1264static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
1265 unsigned int cmd, unsigned long arg)
1266{
1267 struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
1268
1269 /*
1270 * If we are in the middle of error recovery, don't let anyone
1271 * else try and use this device. Also, if error recovery fails, it
1272 * may try and take the device offline, in which case all further
1273 * access to the device is prohibited.
1274 */
1275 if (!scsi_block_when_processing_errors(sdev))
1276 return -ENODEV;
1277
1278 if (sdev->host->hostt->compat_ioctl) {
1279 int ret;
1280
1281 ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
1282
1283 return ret;
1284 }
1285
1286 /*
1287 * Let the static ioctl translation table take care of it.
1288 */
1289 return -ENOIOCTLCMD;
1290}
1291#endif
1292
1293static const struct block_device_operations sd_fops = {
1294 .owner = THIS_MODULE,
1295 .open = sd_open,
1296 .release = sd_release,
1297 .ioctl = sd_ioctl,
1298 .getgeo = sd_getgeo,
1299#ifdef CONFIG_COMPAT
1300 .compat_ioctl = sd_compat_ioctl,
1301#endif
1302 .check_events = sd_check_events,
1303 .revalidate_disk = sd_revalidate_disk,
1304 .unlock_native_capacity = sd_unlock_native_capacity,
1305};
1306
1307static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
1308{
1309 u64 start_lba = blk_rq_pos(scmd->request);
1310 u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
1311 u64 bad_lba;
1312 int info_valid;
1313 /*
1314 * resid is optional but mostly filled in. When it's unused,
1315 * its value is zero, so we assume the whole buffer transferred
1316 */
1317 unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
1318 unsigned int good_bytes;
1319
1320 if (scmd->request->cmd_type != REQ_TYPE_FS)
1321 return 0;
1322
1323 info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
1324 SCSI_SENSE_BUFFERSIZE,
1325 &bad_lba);
1326 if (!info_valid)
1327 return 0;
1328
1329 if (scsi_bufflen(scmd) <= scmd->device->sector_size)
1330 return 0;
1331
1332 if (scmd->device->sector_size < 512) {
1333 /* only legitimate sector_size here is 256 */
1334 start_lba <<= 1;
1335 end_lba <<= 1;
1336 } else {
1337 /* be careful ... don't want any overflows */
1338 u64 factor = scmd->device->sector_size / 512;
1339 do_div(start_lba, factor);
1340 do_div(end_lba, factor);
1341 }
1342
1343 /* The bad lba was reported incorrectly, we have no idea where
1344 * the error is.
1345 */
1346 if (bad_lba < start_lba || bad_lba >= end_lba)
1347 return 0;
1348
1349 /* This computation should always be done in terms of
1350 * the resolution of the device's medium.
1351 */
1352 good_bytes = (bad_lba - start_lba) * scmd->device->sector_size;
1353 return min(good_bytes, transferred);
1354}
1355
1356/**
1357 * sd_done - bottom half handler: called when the lower level
1358 * driver has completed (successfully or otherwise) a scsi command.
1359 * @SCpnt: mid-level's per command structure.
1360 *
1361 * Note: potentially run from within an ISR. Must not block.
1362 **/
1363static int sd_done(struct scsi_cmnd *SCpnt)
1364{
1365 int result = SCpnt->result;
1366 unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
1367 struct scsi_sense_hdr sshdr;
1368 struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
1369 int sense_valid = 0;
1370 int sense_deferred = 0;
1371 unsigned char op = SCpnt->cmnd[0];
1372
1373 if ((SCpnt->request->cmd_flags & REQ_DISCARD) && !result)
1374 scsi_set_resid(SCpnt, 0);
1375
1376 if (result) {
1377 sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
1378 if (sense_valid)
1379 sense_deferred = scsi_sense_is_deferred(&sshdr);
1380 }
1381#ifdef CONFIG_SCSI_LOGGING
1382 SCSI_LOG_HLCOMPLETE(1, scsi_print_result(SCpnt));
1383 if (sense_valid) {
1384 SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
1385 "sd_done: sb[respc,sk,asc,"
1386 "ascq]=%x,%x,%x,%x\n",
1387 sshdr.response_code,
1388 sshdr.sense_key, sshdr.asc,
1389 sshdr.ascq));
1390 }
1391#endif
1392 if (driver_byte(result) != DRIVER_SENSE &&
1393 (!sense_valid || sense_deferred))
1394 goto out;
1395
1396 switch (sshdr.sense_key) {
1397 case HARDWARE_ERROR:
1398 case MEDIUM_ERROR:
1399 good_bytes = sd_completed_bytes(SCpnt);
1400 break;
1401 case RECOVERED_ERROR:
1402 good_bytes = scsi_bufflen(SCpnt);
1403 break;
1404 case NO_SENSE:
1405 /* This indicates a false check condition, so ignore it. An
1406 * unknown amount of data was transferred so treat it as an
1407 * error.
1408 */
1409 scsi_print_sense("sd", SCpnt);
1410 SCpnt->result = 0;
1411 memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1412 break;
1413 case ABORTED_COMMAND:
1414 if (sshdr.asc == 0x10) /* DIF: Target detected corruption */
1415 good_bytes = sd_completed_bytes(SCpnt);
1416 break;
1417 case ILLEGAL_REQUEST:
1418 if (sshdr.asc == 0x10) /* DIX: Host detected corruption */
1419 good_bytes = sd_completed_bytes(SCpnt);
1420 /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
1421 if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
1422 (op == UNMAP || op == WRITE_SAME_16 || op == WRITE_SAME))
1423 sd_config_discard(sdkp, SD_LBP_DISABLE);
1424 break;
1425 default:
1426 break;
1427 }
1428 out:
1429 if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
1430 sd_dif_complete(SCpnt, good_bytes);
1431
1432 if (scsi_host_dif_capable(sdkp->device->host, sdkp->protection_type)
1433 == SD_DIF_TYPE2_PROTECTION && SCpnt->cmnd != SCpnt->request->cmd) {
1434
1435 /* We have to print a failed command here as the
1436 * extended CDB gets freed before scsi_io_completion()
1437 * is called.
1438 */
1439 if (result)
1440 scsi_print_command(SCpnt);
1441
1442 mempool_free(SCpnt->cmnd, sd_cdb_pool);
1443 SCpnt->cmnd = NULL;
1444 SCpnt->cmd_len = 0;
1445 }
1446
1447 return good_bytes;
1448}
1449
1450/*
1451 * spinup disk - called only in sd_revalidate_disk()
1452 */
1453static void
1454sd_spinup_disk(struct scsi_disk *sdkp)
1455{
1456 unsigned char cmd[10];
1457 unsigned long spintime_expire = 0;
1458 int retries, spintime;
1459 unsigned int the_result;
1460 struct scsi_sense_hdr sshdr;
1461 int sense_valid = 0;
1462
1463 spintime = 0;
1464
1465 /* Spin up drives, as required. Only do this at boot time */
1466 /* Spinup needs to be done for module loads too. */
1467 do {
1468 retries = 0;
1469
1470 do {
1471 cmd[0] = TEST_UNIT_READY;
1472 memset((void *) &cmd[1], 0, 9);
1473
1474 the_result = scsi_execute_req(sdkp->device, cmd,
1475 DMA_NONE, NULL, 0,
1476 &sshdr, SD_TIMEOUT,
1477 SD_MAX_RETRIES, NULL);
1478
1479 /*
1480 * If the drive has indicated to us that it
1481 * doesn't have any media in it, don't bother
1482 * with any more polling.
1483 */
1484 if (media_not_present(sdkp, &sshdr))
1485 return;
1486
1487 if (the_result)
1488 sense_valid = scsi_sense_valid(&sshdr);
1489 retries++;
1490 } while (retries < 3 &&
1491 (!scsi_status_is_good(the_result) ||
1492 ((driver_byte(the_result) & DRIVER_SENSE) &&
1493 sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
1494
1495 if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
1496 /* no sense, TUR either succeeded or failed
1497 * with a status error */
1498 if(!spintime && !scsi_status_is_good(the_result)) {
1499 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
1500 sd_print_result(sdkp, the_result);
1501 }
1502 break;
1503 }
1504
1505 /*
1506 * The device does not want the automatic start to be issued.
1507 */
1508 if (sdkp->device->no_start_on_add)
1509 break;
1510
1511 if (sense_valid && sshdr.sense_key == NOT_READY) {
1512 if (sshdr.asc == 4 && sshdr.ascq == 3)
1513 break; /* manual intervention required */
1514 if (sshdr.asc == 4 && sshdr.ascq == 0xb)
1515 break; /* standby */
1516 if (sshdr.asc == 4 && sshdr.ascq == 0xc)
1517 break; /* unavailable */
1518 /*
1519 * Issue command to spin up drive when not ready
1520 */
1521 if (!spintime) {
1522 sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
1523 cmd[0] = START_STOP;
1524 cmd[1] = 1; /* Return immediately */
1525 memset((void *) &cmd[2], 0, 8);
1526 cmd[4] = 1; /* Start spin cycle */
1527 if (sdkp->device->start_stop_pwr_cond)
1528 cmd[4] |= 1 << 4;
1529 scsi_execute_req(sdkp->device, cmd, DMA_NONE,
1530 NULL, 0, &sshdr,
1531 SD_TIMEOUT, SD_MAX_RETRIES,
1532 NULL);
1533 spintime_expire = jiffies + 100 * HZ;
1534 spintime = 1;
1535 }
1536 /* Wait 1 second for next try */
1537 msleep(1000);
1538 printk(".");
1539
1540 /*
1541 * Wait for USB flash devices with slow firmware.
1542 * Yes, this sense key/ASC combination shouldn't
1543 * occur here. It's characteristic of these devices.
1544 */
1545 } else if (sense_valid &&
1546 sshdr.sense_key == UNIT_ATTENTION &&
1547 sshdr.asc == 0x28) {
1548 if (!spintime) {
1549 spintime_expire = jiffies + 5 * HZ;
1550 spintime = 1;
1551 }
1552 /* Wait 1 second for next try */
1553 msleep(1000);
1554 } else {
1555 /* we don't understand the sense code, so it's
1556 * probably pointless to loop */
1557 if(!spintime) {
1558 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
1559 sd_print_sense_hdr(sdkp, &sshdr);
1560 }
1561 break;
1562 }
1563
1564 } while (spintime && time_before_eq(jiffies, spintime_expire));
1565
1566 if (spintime) {
1567 if (scsi_status_is_good(the_result))
1568 printk("ready\n");
1569 else
1570 printk("not responding...\n");
1571 }
1572}
1573
1574
1575/*
1576 * Determine whether disk supports Data Integrity Field.
1577 */
1578static void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
1579{
1580 struct scsi_device *sdp = sdkp->device;
1581 u8 type;
1582
1583 if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
1584 return;
1585
1586 type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
1587
1588 if (type == sdkp->protection_type || !sdkp->first_scan)
1589 return;
1590
1591 sdkp->protection_type = type;
1592
1593 if (type > SD_DIF_TYPE3_PROTECTION) {
1594 sd_printk(KERN_ERR, sdkp, "formatted with unsupported " \
1595 "protection type %u. Disabling disk!\n", type);
1596 sdkp->capacity = 0;
1597 return;
1598 }
1599
1600 if (scsi_host_dif_capable(sdp->host, type))
1601 sd_printk(KERN_NOTICE, sdkp,
1602 "Enabling DIF Type %u protection\n", type);
1603 else
1604 sd_printk(KERN_NOTICE, sdkp,
1605 "Disabling DIF Type %u protection\n", type);
1606}
1607
1608static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
1609 struct scsi_sense_hdr *sshdr, int sense_valid,
1610 int the_result)
1611{
1612 sd_print_result(sdkp, the_result);
1613 if (driver_byte(the_result) & DRIVER_SENSE)
1614 sd_print_sense_hdr(sdkp, sshdr);
1615 else
1616 sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
1617
1618 /*
1619 * Set dirty bit for removable devices if not ready -
1620 * sometimes drives will not report this properly.
1621 */
1622 if (sdp->removable &&
1623 sense_valid && sshdr->sense_key == NOT_READY)
1624 set_media_not_present(sdkp);
1625
1626 /*
1627 * We used to set media_present to 0 here to indicate no media
1628 * in the drive, but some drives fail read capacity even with
1629 * media present, so we can't do that.
1630 */
1631 sdkp->capacity = 0; /* unknown mapped to zero - as usual */
1632}
1633
1634#define RC16_LEN 32
1635#if RC16_LEN > SD_BUF_SIZE
1636#error RC16_LEN must not be more than SD_BUF_SIZE
1637#endif
1638
1639#define READ_CAPACITY_RETRIES_ON_RESET 10
1640
1641static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
1642 unsigned char *buffer)
1643{
1644 unsigned char cmd[16];
1645 struct scsi_sense_hdr sshdr;
1646 int sense_valid = 0;
1647 int the_result;
1648 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
1649 unsigned int alignment;
1650 unsigned long long lba;
1651 unsigned sector_size;
1652
1653 if (sdp->no_read_capacity_16)
1654 return -EINVAL;
1655
1656 do {
1657 memset(cmd, 0, 16);
1658 cmd[0] = SERVICE_ACTION_IN;
1659 cmd[1] = SAI_READ_CAPACITY_16;
1660 cmd[13] = RC16_LEN;
1661 memset(buffer, 0, RC16_LEN);
1662
1663 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
1664 buffer, RC16_LEN, &sshdr,
1665 SD_TIMEOUT, SD_MAX_RETRIES, NULL);
1666
1667 if (media_not_present(sdkp, &sshdr))
1668 return -ENODEV;
1669
1670 if (the_result) {
1671 sense_valid = scsi_sense_valid(&sshdr);
1672 if (sense_valid &&
1673 sshdr.sense_key == ILLEGAL_REQUEST &&
1674 (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
1675 sshdr.ascq == 0x00)
1676 /* Invalid Command Operation Code or
1677 * Invalid Field in CDB, just retry
1678 * silently with RC10 */
1679 return -EINVAL;
1680 if (sense_valid &&
1681 sshdr.sense_key == UNIT_ATTENTION &&
1682 sshdr.asc == 0x29 && sshdr.ascq == 0x00)
1683 /* Device reset might occur several times,
1684 * give it one more chance */
1685 if (--reset_retries > 0)
1686 continue;
1687 }
1688 retries--;
1689
1690 } while (the_result && retries);
1691
1692 if (the_result) {
1693 sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n");
1694 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
1695 return -EINVAL;
1696 }
1697
1698 sector_size = get_unaligned_be32(&buffer[8]);
1699 lba = get_unaligned_be64(&buffer[0]);
1700
1701 sd_read_protection_type(sdkp, buffer);
1702
1703 if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) {
1704 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
1705 "kernel compiled with support for large block "
1706 "devices.\n");
1707 sdkp->capacity = 0;
1708 return -EOVERFLOW;
1709 }
1710
1711 /* Logical blocks per physical block exponent */
1712 sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size;
1713
1714 /* Lowest aligned logical block */
1715 alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
1716 blk_queue_alignment_offset(sdp->request_queue, alignment);
1717 if (alignment && sdkp->first_scan)
1718 sd_printk(KERN_NOTICE, sdkp,
1719 "physical block alignment offset: %u\n", alignment);
1720
1721 if (buffer[14] & 0x80) { /* LBPME */
1722 sdkp->lbpme = 1;
1723
1724 if (buffer[14] & 0x40) /* LBPRZ */
1725 sdkp->lbprz = 1;
1726
1727 sd_config_discard(sdkp, SD_LBP_WS16);
1728 }
1729
1730 sdkp->capacity = lba + 1;
1731 return sector_size;
1732}
1733
1734static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
1735 unsigned char *buffer)
1736{
1737 unsigned char cmd[16];
1738 struct scsi_sense_hdr sshdr;
1739 int sense_valid = 0;
1740 int the_result;
1741 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
1742 sector_t lba;
1743 unsigned sector_size;
1744
1745 do {
1746 cmd[0] = READ_CAPACITY;
1747 memset(&cmd[1], 0, 9);
1748 memset(buffer, 0, 8);
1749
1750 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
1751 buffer, 8, &sshdr,
1752 SD_TIMEOUT, SD_MAX_RETRIES, NULL);
1753
1754 if (media_not_present(sdkp, &sshdr))
1755 return -ENODEV;
1756
1757 if (the_result) {
1758 sense_valid = scsi_sense_valid(&sshdr);
1759 if (sense_valid &&
1760 sshdr.sense_key == UNIT_ATTENTION &&
1761 sshdr.asc == 0x29 && sshdr.ascq == 0x00)
1762 /* Device reset might occur several times,
1763 * give it one more chance */
1764 if (--reset_retries > 0)
1765 continue;
1766 }
1767 retries--;
1768
1769 } while (the_result && retries);
1770
1771 if (the_result) {
1772 sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n");
1773 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
1774 return -EINVAL;
1775 }
1776
1777 sector_size = get_unaligned_be32(&buffer[4]);
1778 lba = get_unaligned_be32(&buffer[0]);
1779
1780 if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) {
1781 /* Some buggy (usb cardreader) devices return an lba of
1782 0xffffffff when the want to report a size of 0 (with
1783 which they really mean no media is present) */
1784 sdkp->capacity = 0;
1785 sdkp->physical_block_size = sector_size;
1786 return sector_size;
1787 }
1788
1789 if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
1790 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
1791 "kernel compiled with support for large block "
1792 "devices.\n");
1793 sdkp->capacity = 0;
1794 return -EOVERFLOW;
1795 }
1796
1797 sdkp->capacity = lba + 1;
1798 sdkp->physical_block_size = sector_size;
1799 return sector_size;
1800}
1801
1802static int sd_try_rc16_first(struct scsi_device *sdp)
1803{
1804 if (sdp->host->max_cmd_len < 16)
1805 return 0;
1806 if (sdp->scsi_level > SCSI_SPC_2)
1807 return 1;
1808 if (scsi_device_protection(sdp))
1809 return 1;
1810 return 0;
1811}
1812
1813/*
1814 * read disk capacity
1815 */
1816static void
1817sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
1818{
1819 int sector_size;
1820 struct scsi_device *sdp = sdkp->device;
1821 sector_t old_capacity = sdkp->capacity;
1822
1823 if (sd_try_rc16_first(sdp)) {
1824 sector_size = read_capacity_16(sdkp, sdp, buffer);
1825 if (sector_size == -EOVERFLOW)
1826 goto got_data;
1827 if (sector_size == -ENODEV)
1828 return;
1829 if (sector_size < 0)
1830 sector_size = read_capacity_10(sdkp, sdp, buffer);
1831 if (sector_size < 0)
1832 return;
1833 } else {
1834 sector_size = read_capacity_10(sdkp, sdp, buffer);
1835 if (sector_size == -EOVERFLOW)
1836 goto got_data;
1837 if (sector_size < 0)
1838 return;
1839 if ((sizeof(sdkp->capacity) > 4) &&
1840 (sdkp->capacity > 0xffffffffULL)) {
1841 int old_sector_size = sector_size;
1842 sd_printk(KERN_NOTICE, sdkp, "Very big device. "
1843 "Trying to use READ CAPACITY(16).\n");
1844 sector_size = read_capacity_16(sdkp, sdp, buffer);
1845 if (sector_size < 0) {
1846 sd_printk(KERN_NOTICE, sdkp,
1847 "Using 0xffffffff as device size\n");
1848 sdkp->capacity = 1 + (sector_t) 0xffffffff;
1849 sector_size = old_sector_size;
1850 goto got_data;
1851 }
1852 }
1853 }
1854
1855 /* Some devices are known to return the total number of blocks,
1856 * not the highest block number. Some devices have versions
1857 * which do this and others which do not. Some devices we might
1858 * suspect of doing this but we don't know for certain.
1859 *
1860 * If we know the reported capacity is wrong, decrement it. If
1861 * we can only guess, then assume the number of blocks is even
1862 * (usually true but not always) and err on the side of lowering
1863 * the capacity.
1864 */
1865 if (sdp->fix_capacity ||
1866 (sdp->guess_capacity && (sdkp->capacity & 0x01))) {
1867 sd_printk(KERN_INFO, sdkp, "Adjusting the sector count "
1868 "from its reported value: %llu\n",
1869 (unsigned long long) sdkp->capacity);
1870 --sdkp->capacity;
1871 }
1872
1873got_data:
1874 if (sector_size == 0) {
1875 sector_size = 512;
1876 sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
1877 "assuming 512.\n");
1878 }
1879
1880 if (sector_size != 512 &&
1881 sector_size != 1024 &&
1882 sector_size != 2048 &&
1883 sector_size != 4096 &&
1884 sector_size != 256) {
1885 sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
1886 sector_size);
1887 /*
1888 * The user might want to re-format the drive with
1889 * a supported sectorsize. Once this happens, it
1890 * would be relatively trivial to set the thing up.
1891 * For this reason, we leave the thing in the table.
1892 */
1893 sdkp->capacity = 0;
1894 /*
1895 * set a bogus sector size so the normal read/write
1896 * logic in the block layer will eventually refuse any
1897 * request on this device without tripping over power
1898 * of two sector size assumptions
1899 */
1900 sector_size = 512;
1901 }
1902 blk_queue_logical_block_size(sdp->request_queue, sector_size);
1903
1904 {
1905 char cap_str_2[10], cap_str_10[10];
1906 u64 sz = (u64)sdkp->capacity << ilog2(sector_size);
1907
1908 string_get_size(sz, STRING_UNITS_2, cap_str_2,
1909 sizeof(cap_str_2));
1910 string_get_size(sz, STRING_UNITS_10, cap_str_10,
1911 sizeof(cap_str_10));
1912
1913 if (sdkp->first_scan || old_capacity != sdkp->capacity) {
1914 sd_printk(KERN_NOTICE, sdkp,
1915 "%llu %d-byte logical blocks: (%s/%s)\n",
1916 (unsigned long long)sdkp->capacity,
1917 sector_size, cap_str_10, cap_str_2);
1918
1919 if (sdkp->physical_block_size != sector_size)
1920 sd_printk(KERN_NOTICE, sdkp,
1921 "%u-byte physical blocks\n",
1922 sdkp->physical_block_size);
1923 }
1924 }
1925
1926 /* Rescale capacity to 512-byte units */
1927 if (sector_size == 4096)
1928 sdkp->capacity <<= 3;
1929 else if (sector_size == 2048)
1930 sdkp->capacity <<= 2;
1931 else if (sector_size == 1024)
1932 sdkp->capacity <<= 1;
1933 else if (sector_size == 256)
1934 sdkp->capacity >>= 1;
1935
1936 blk_queue_physical_block_size(sdp->request_queue,
1937 sdkp->physical_block_size);
1938 sdkp->device->sector_size = sector_size;
1939}
1940
1941/* called with buffer of length 512 */
1942static inline int
1943sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
1944 unsigned char *buffer, int len, struct scsi_mode_data *data,
1945 struct scsi_sense_hdr *sshdr)
1946{
1947 return scsi_mode_sense(sdp, dbd, modepage, buffer, len,
1948 SD_TIMEOUT, SD_MAX_RETRIES, data,
1949 sshdr);
1950}
1951
1952/*
1953 * read write protect setting, if possible - called only in sd_revalidate_disk()
1954 * called with buffer of length SD_BUF_SIZE
1955 */
1956static void
1957sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
1958{
1959 int res;
1960 struct scsi_device *sdp = sdkp->device;
1961 struct scsi_mode_data data;
1962 int old_wp = sdkp->write_prot;
1963
1964 set_disk_ro(sdkp->disk, 0);
1965 if (sdp->skip_ms_page_3f) {
1966 sd_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
1967 return;
1968 }
1969
1970 if (sdp->use_192_bytes_for_3f) {
1971 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL);
1972 } else {
1973 /*
1974 * First attempt: ask for all pages (0x3F), but only 4 bytes.
1975 * We have to start carefully: some devices hang if we ask
1976 * for more than is available.
1977 */
1978 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL);
1979
1980 /*
1981 * Second attempt: ask for page 0 When only page 0 is
1982 * implemented, a request for page 3F may return Sense Key
1983 * 5: Illegal Request, Sense Code 24: Invalid field in
1984 * CDB.
1985 */
1986 if (!scsi_status_is_good(res))
1987 res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL);
1988
1989 /*
1990 * Third attempt: ask 255 bytes, as we did earlier.
1991 */
1992 if (!scsi_status_is_good(res))
1993 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255,
1994 &data, NULL);
1995 }
1996
1997 if (!scsi_status_is_good(res)) {
1998 sd_printk(KERN_WARNING, sdkp,
1999 "Test WP failed, assume Write Enabled\n");
2000 } else {
2001 sdkp->write_prot = ((data.device_specific & 0x80) != 0);
2002 set_disk_ro(sdkp->disk, sdkp->write_prot);
2003 if (sdkp->first_scan || old_wp != sdkp->write_prot) {
2004 sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
2005 sdkp->write_prot ? "on" : "off");
2006 sd_printk(KERN_DEBUG, sdkp,
2007 "Mode Sense: %02x %02x %02x %02x\n",
2008 buffer[0], buffer[1], buffer[2], buffer[3]);
2009 }
2010 }
2011}
2012
2013/*
2014 * sd_read_cache_type - called only from sd_revalidate_disk()
2015 * called with buffer of length SD_BUF_SIZE
2016 */
2017static void
2018sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
2019{
2020 int len = 0, res;
2021 struct scsi_device *sdp = sdkp->device;
2022
2023 int dbd;
2024 int modepage;
2025 int first_len;
2026 struct scsi_mode_data data;
2027 struct scsi_sense_hdr sshdr;
2028 int old_wce = sdkp->WCE;
2029 int old_rcd = sdkp->RCD;
2030 int old_dpofua = sdkp->DPOFUA;
2031
2032 first_len = 4;
2033 if (sdp->skip_ms_page_8) {
2034 if (sdp->type == TYPE_RBC)
2035 goto defaults;
2036 else {
2037 if (sdp->skip_ms_page_3f)
2038 goto defaults;
2039 modepage = 0x3F;
2040 if (sdp->use_192_bytes_for_3f)
2041 first_len = 192;
2042 dbd = 0;
2043 }
2044 } else if (sdp->type == TYPE_RBC) {
2045 modepage = 6;
2046 dbd = 8;
2047 } else {
2048 modepage = 8;
2049 dbd = 0;
2050 }
2051
2052 /* cautiously ask */
2053 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len,
2054 &data, &sshdr);
2055
2056 if (!scsi_status_is_good(res))
2057 goto bad_sense;
2058
2059 if (!data.header_length) {
2060 modepage = 6;
2061 first_len = 0;
2062 sd_printk(KERN_ERR, sdkp, "Missing header in MODE_SENSE response\n");
2063 }
2064
2065 /* that went OK, now ask for the proper length */
2066 len = data.length;
2067
2068 /*
2069 * We're only interested in the first three bytes, actually.
2070 * But the data cache page is defined for the first 20.
2071 */
2072 if (len < 3)
2073 goto bad_sense;
2074 else if (len > SD_BUF_SIZE) {
2075 sd_printk(KERN_NOTICE, sdkp, "Truncating mode parameter "
2076 "data from %d to %d bytes\n", len, SD_BUF_SIZE);
2077 len = SD_BUF_SIZE;
2078 }
2079 if (modepage == 0x3F && sdp->use_192_bytes_for_3f)
2080 len = 192;
2081
2082 /* Get the data */
2083 if (len > first_len)
2084 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len,
2085 &data, &sshdr);
2086
2087 if (scsi_status_is_good(res)) {
2088 int offset = data.header_length + data.block_descriptor_length;
2089
2090 while (offset < len) {
2091 u8 page_code = buffer[offset] & 0x3F;
2092 u8 spf = buffer[offset] & 0x40;
2093
2094 if (page_code == 8 || page_code == 6) {
2095 /* We're interested only in the first 3 bytes.
2096 */
2097 if (len - offset <= 2) {
2098 sd_printk(KERN_ERR, sdkp, "Incomplete "
2099 "mode parameter data\n");
2100 goto defaults;
2101 } else {
2102 modepage = page_code;
2103 goto Page_found;
2104 }
2105 } else {
2106 /* Go to the next page */
2107 if (spf && len - offset > 3)
2108 offset += 4 + (buffer[offset+2] << 8) +
2109 buffer[offset+3];
2110 else if (!spf && len - offset > 1)
2111 offset += 2 + buffer[offset+1];
2112 else {
2113 sd_printk(KERN_ERR, sdkp, "Incomplete "
2114 "mode parameter data\n");
2115 goto defaults;
2116 }
2117 }
2118 }
2119
2120 if (modepage == 0x3F) {
2121 sd_printk(KERN_ERR, sdkp, "No Caching mode page "
2122 "present\n");
2123 goto defaults;
2124 } else if ((buffer[offset] & 0x3f) != modepage) {
2125 sd_printk(KERN_ERR, sdkp, "Got wrong page\n");
2126 goto defaults;
2127 }
2128 Page_found:
2129 if (modepage == 8) {
2130 sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
2131 sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
2132 } else {
2133 sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
2134 sdkp->RCD = 0;
2135 }
2136
2137 sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
2138 if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) {
2139 sd_printk(KERN_NOTICE, sdkp,
2140 "Uses READ/WRITE(6), disabling FUA\n");
2141 sdkp->DPOFUA = 0;
2142 }
2143
2144 if (sdkp->first_scan || old_wce != sdkp->WCE ||
2145 old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA)
2146 sd_printk(KERN_NOTICE, sdkp,
2147 "Write cache: %s, read cache: %s, %s\n",
2148 sdkp->WCE ? "enabled" : "disabled",
2149 sdkp->RCD ? "disabled" : "enabled",
2150 sdkp->DPOFUA ? "supports DPO and FUA"
2151 : "doesn't support DPO or FUA");
2152
2153 return;
2154 }
2155
2156bad_sense:
2157 if (scsi_sense_valid(&sshdr) &&
2158 sshdr.sense_key == ILLEGAL_REQUEST &&
2159 sshdr.asc == 0x24 && sshdr.ascq == 0x0)
2160 /* Invalid field in CDB */
2161 sd_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
2162 else
2163 sd_printk(KERN_ERR, sdkp, "Asking for cache data failed\n");
2164
2165defaults:
2166 sd_printk(KERN_ERR, sdkp, "Assuming drive cache: write through\n");
2167 sdkp->WCE = 0;
2168 sdkp->RCD = 0;
2169 sdkp->DPOFUA = 0;
2170}
2171
2172/*
2173 * The ATO bit indicates whether the DIF application tag is available
2174 * for use by the operating system.
2175 */
2176static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
2177{
2178 int res, offset;
2179 struct scsi_device *sdp = sdkp->device;
2180 struct scsi_mode_data data;
2181 struct scsi_sense_hdr sshdr;
2182
2183 if (sdp->type != TYPE_DISK)
2184 return;
2185
2186 if (sdkp->protection_type == 0)
2187 return;
2188
2189 res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
2190 SD_MAX_RETRIES, &data, &sshdr);
2191
2192 if (!scsi_status_is_good(res) || !data.header_length ||
2193 data.length < 6) {
2194 sd_printk(KERN_WARNING, sdkp,
2195 "getting Control mode page failed, assume no ATO\n");
2196
2197 if (scsi_sense_valid(&sshdr))
2198 sd_print_sense_hdr(sdkp, &sshdr);
2199
2200 return;
2201 }
2202
2203 offset = data.header_length + data.block_descriptor_length;
2204
2205 if ((buffer[offset] & 0x3f) != 0x0a) {
2206 sd_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
2207 return;
2208 }
2209
2210 if ((buffer[offset + 5] & 0x80) == 0)
2211 return;
2212
2213 sdkp->ATO = 1;
2214
2215 return;
2216}
2217
2218/**
2219 * sd_read_block_limits - Query disk device for preferred I/O sizes.
2220 * @disk: disk to query
2221 */
2222static void sd_read_block_limits(struct scsi_disk *sdkp)
2223{
2224 unsigned int sector_sz = sdkp->device->sector_size;
2225 const int vpd_len = 64;
2226 unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
2227
2228 if (!buffer ||
2229 /* Block Limits VPD */
2230 scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
2231 goto out;
2232
2233 blk_queue_io_min(sdkp->disk->queue,
2234 get_unaligned_be16(&buffer[6]) * sector_sz);
2235 blk_queue_io_opt(sdkp->disk->queue,
2236 get_unaligned_be32(&buffer[12]) * sector_sz);
2237
2238 if (buffer[3] == 0x3c) {
2239 unsigned int lba_count, desc_count;
2240
2241 sdkp->max_ws_blocks =
2242 (u32) min_not_zero(get_unaligned_be64(&buffer[36]),
2243 (u64)0xffffffff);
2244
2245 if (!sdkp->lbpme)
2246 goto out;
2247
2248 lba_count = get_unaligned_be32(&buffer[20]);
2249 desc_count = get_unaligned_be32(&buffer[24]);
2250
2251 if (lba_count && desc_count)
2252 sdkp->max_unmap_blocks = lba_count;
2253
2254 sdkp->unmap_granularity = get_unaligned_be32(&buffer[28]);
2255
2256 if (buffer[32] & 0x80)
2257 sdkp->unmap_alignment =
2258 get_unaligned_be32(&buffer[32]) & ~(1 << 31);
2259
2260 if (!sdkp->lbpvpd) { /* LBP VPD page not provided */
2261
2262 if (sdkp->max_unmap_blocks)
2263 sd_config_discard(sdkp, SD_LBP_UNMAP);
2264 else
2265 sd_config_discard(sdkp, SD_LBP_WS16);
2266
2267 } else { /* LBP VPD page tells us what to use */
2268
2269 if (sdkp->lbpu && sdkp->max_unmap_blocks)
2270 sd_config_discard(sdkp, SD_LBP_UNMAP);
2271 else if (sdkp->lbpws)
2272 sd_config_discard(sdkp, SD_LBP_WS16);
2273 else if (sdkp->lbpws10)
2274 sd_config_discard(sdkp, SD_LBP_WS10);
2275 else
2276 sd_config_discard(sdkp, SD_LBP_DISABLE);
2277 }
2278 }
2279
2280 out:
2281 kfree(buffer);
2282}
2283
2284/**
2285 * sd_read_block_characteristics - Query block dev. characteristics
2286 * @disk: disk to query
2287 */
2288static void sd_read_block_characteristics(struct scsi_disk *sdkp)
2289{
2290 unsigned char *buffer;
2291 u16 rot;
2292 const int vpd_len = 64;
2293
2294 buffer = kmalloc(vpd_len, GFP_KERNEL);
2295
2296 if (!buffer ||
2297 /* Block Device Characteristics VPD */
2298 scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len))
2299 goto out;
2300
2301 rot = get_unaligned_be16(&buffer[4]);
2302
2303 if (rot == 1)
2304 queue_flag_set_unlocked(QUEUE_FLAG_NONROT, sdkp->disk->queue);
2305
2306 out:
2307 kfree(buffer);
2308}
2309
2310/**
2311 * sd_read_block_provisioning - Query provisioning VPD page
2312 * @disk: disk to query
2313 */
2314static void sd_read_block_provisioning(struct scsi_disk *sdkp)
2315{
2316 unsigned char *buffer;
2317 const int vpd_len = 8;
2318
2319 if (sdkp->lbpme == 0)
2320 return;
2321
2322 buffer = kmalloc(vpd_len, GFP_KERNEL);
2323
2324 if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb2, buffer, vpd_len))
2325 goto out;
2326
2327 sdkp->lbpvpd = 1;
2328 sdkp->lbpu = (buffer[5] >> 7) & 1; /* UNMAP */
2329 sdkp->lbpws = (buffer[5] >> 6) & 1; /* WRITE SAME(16) with UNMAP */
2330 sdkp->lbpws10 = (buffer[5] >> 5) & 1; /* WRITE SAME(10) with UNMAP */
2331
2332 out:
2333 kfree(buffer);
2334}
2335
2336static int sd_try_extended_inquiry(struct scsi_device *sdp)
2337{
2338 /*
2339 * Although VPD inquiries can go to SCSI-2 type devices,
2340 * some USB ones crash on receiving them, and the pages
2341 * we currently ask for are for SPC-3 and beyond
2342 */
2343 if (sdp->scsi_level > SCSI_SPC_2)
2344 return 1;
2345 return 0;
2346}
2347
2348/**
2349 * sd_revalidate_disk - called the first time a new disk is seen,
2350 * performs disk spin up, read_capacity, etc.
2351 * @disk: struct gendisk we care about
2352 **/
2353static int sd_revalidate_disk(struct gendisk *disk)
2354{
2355 struct scsi_disk *sdkp = scsi_disk(disk);
2356 struct scsi_device *sdp = sdkp->device;
2357 unsigned char *buffer;
2358 unsigned flush = 0;
2359
2360 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
2361 "sd_revalidate_disk\n"));
2362
2363 /*
2364 * If the device is offline, don't try and read capacity or any
2365 * of the other niceties.
2366 */
2367 if (!scsi_device_online(sdp))
2368 goto out;
2369
2370 buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
2371 if (!buffer) {
2372 sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
2373 "allocation failure.\n");
2374 goto out;
2375 }
2376
2377 sd_spinup_disk(sdkp);
2378
2379 /*
2380 * Without media there is no reason to ask; moreover, some devices
2381 * react badly if we do.
2382 */
2383 if (sdkp->media_present) {
2384 sd_read_capacity(sdkp, buffer);
2385
2386 if (sd_try_extended_inquiry(sdp)) {
2387 sd_read_block_provisioning(sdkp);
2388 sd_read_block_limits(sdkp);
2389 sd_read_block_characteristics(sdkp);
2390 }
2391
2392 sd_read_write_protect_flag(sdkp, buffer);
2393 sd_read_cache_type(sdkp, buffer);
2394 sd_read_app_tag_own(sdkp, buffer);
2395 }
2396
2397 sdkp->first_scan = 0;
2398
2399 /*
2400 * We now have all cache related info, determine how we deal
2401 * with flush requests.
2402 */
2403 if (sdkp->WCE) {
2404 flush |= REQ_FLUSH;
2405 if (sdkp->DPOFUA)
2406 flush |= REQ_FUA;
2407 }
2408
2409 blk_queue_flush(sdkp->disk->queue, flush);
2410
2411 set_capacity(disk, sdkp->capacity);
2412 kfree(buffer);
2413
2414 out:
2415 return 0;
2416}
2417
2418/**
2419 * sd_unlock_native_capacity - unlock native capacity
2420 * @disk: struct gendisk to set capacity for
2421 *
2422 * Block layer calls this function if it detects that partitions
2423 * on @disk reach beyond the end of the device. If the SCSI host
2424 * implements ->unlock_native_capacity() method, it's invoked to
2425 * give it a chance to adjust the device capacity.
2426 *
2427 * CONTEXT:
2428 * Defined by block layer. Might sleep.
2429 */
2430static void sd_unlock_native_capacity(struct gendisk *disk)
2431{
2432 struct scsi_device *sdev = scsi_disk(disk)->device;
2433
2434 if (sdev->host->hostt->unlock_native_capacity)
2435 sdev->host->hostt->unlock_native_capacity(sdev);
2436}
2437
2438/**
2439 * sd_format_disk_name - format disk name
2440 * @prefix: name prefix - ie. "sd" for SCSI disks
2441 * @index: index of the disk to format name for
2442 * @buf: output buffer
2443 * @buflen: length of the output buffer
2444 *
2445 * SCSI disk names starts at sda. The 26th device is sdz and the
2446 * 27th is sdaa. The last one for two lettered suffix is sdzz
2447 * which is followed by sdaaa.
2448 *
2449 * This is basically 26 base counting with one extra 'nil' entry
2450 * at the beginning from the second digit on and can be
2451 * determined using similar method as 26 base conversion with the
2452 * index shifted -1 after each digit is computed.
2453 *
2454 * CONTEXT:
2455 * Don't care.
2456 *
2457 * RETURNS:
2458 * 0 on success, -errno on failure.
2459 */
2460static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
2461{
2462 const int base = 'z' - 'a' + 1;
2463 char *begin = buf + strlen(prefix);
2464 char *end = buf + buflen;
2465 char *p;
2466 int unit;
2467
2468 p = end - 1;
2469 *p = '\0';
2470 unit = base;
2471 do {
2472 if (p == begin)
2473 return -EINVAL;
2474 *--p = 'a' + (index % unit);
2475 index = (index / unit) - 1;
2476 } while (index >= 0);
2477
2478 memmove(begin, p, end - p);
2479 memcpy(buf, prefix, strlen(prefix));
2480
2481 return 0;
2482}
2483
2484/*
2485 * The asynchronous part of sd_probe
2486 */
2487static void sd_probe_async(void *data, async_cookie_t cookie)
2488{
2489 struct scsi_disk *sdkp = data;
2490 struct scsi_device *sdp;
2491 struct gendisk *gd;
2492 u32 index;
2493 struct device *dev;
2494
2495 sdp = sdkp->device;
2496 gd = sdkp->disk;
2497 index = sdkp->index;
2498 dev = &sdp->sdev_gendev;
2499
2500 gd->major = sd_major((index & 0xf0) >> 4);
2501 gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
2502 gd->minors = SD_MINORS;
2503
2504 gd->fops = &sd_fops;
2505 gd->private_data = &sdkp->driver;
2506 gd->queue = sdkp->device->request_queue;
2507
2508 /* defaults, until the device tells us otherwise */
2509 sdp->sector_size = 512;
2510 sdkp->capacity = 0;
2511 sdkp->media_present = 1;
2512 sdkp->write_prot = 0;
2513 sdkp->WCE = 0;
2514 sdkp->RCD = 0;
2515 sdkp->ATO = 0;
2516 sdkp->first_scan = 1;
2517
2518 sd_revalidate_disk(gd);
2519
2520 blk_queue_prep_rq(sdp->request_queue, sd_prep_fn);
2521 blk_queue_unprep_rq(sdp->request_queue, sd_unprep_fn);
2522
2523 gd->driverfs_dev = &sdp->sdev_gendev;
2524 gd->flags = GENHD_FL_EXT_DEVT;
2525 if (sdp->removable) {
2526 gd->flags |= GENHD_FL_REMOVABLE;
2527 gd->events |= DISK_EVENT_MEDIA_CHANGE;
2528 }
2529
2530 add_disk(gd);
2531 sd_dif_config_host(sdkp);
2532
2533 sd_revalidate_disk(gd);
2534
2535 sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
2536 sdp->removable ? "removable " : "");
2537 scsi_autopm_put_device(sdp);
2538 put_device(&sdkp->dev);
2539}
2540
2541/**
2542 * sd_probe - called during driver initialization and whenever a
2543 * new scsi device is attached to the system. It is called once
2544 * for each scsi device (not just disks) present.
2545 * @dev: pointer to device object
2546 *
2547 * Returns 0 if successful (or not interested in this scsi device
2548 * (e.g. scanner)); 1 when there is an error.
2549 *
2550 * Note: this function is invoked from the scsi mid-level.
2551 * This function sets up the mapping between a given
2552 * <host,channel,id,lun> (found in sdp) and new device name
2553 * (e.g. /dev/sda). More precisely it is the block device major
2554 * and minor number that is chosen here.
2555 *
2556 * Assume sd_attach is not re-entrant (for time being)
2557 * Also think about sd_attach() and sd_remove() running coincidentally.
2558 **/
2559static int sd_probe(struct device *dev)
2560{
2561 struct scsi_device *sdp = to_scsi_device(dev);
2562 struct scsi_disk *sdkp;
2563 struct gendisk *gd;
2564 int index;
2565 int error;
2566
2567 error = -ENODEV;
2568 if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type != TYPE_RBC)
2569 goto out;
2570
2571 SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
2572 "sd_attach\n"));
2573
2574 error = -ENOMEM;
2575 sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
2576 if (!sdkp)
2577 goto out;
2578
2579 gd = alloc_disk(SD_MINORS);
2580 if (!gd)
2581 goto out_free;
2582
2583 do {
2584 if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
2585 goto out_put;
2586
2587 spin_lock(&sd_index_lock);
2588 error = ida_get_new(&sd_index_ida, &index);
2589 spin_unlock(&sd_index_lock);
2590 } while (error == -EAGAIN);
2591
2592 if (error)
2593 goto out_put;
2594
2595 if (index >= SD_MAX_DISKS) {
2596 error = -ENODEV;
2597 sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name space exhausted.\n");
2598 goto out_free_index;
2599 }
2600
2601 error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
2602 if (error)
2603 goto out_free_index;
2604
2605 sdkp->device = sdp;
2606 sdkp->driver = &sd_template;
2607 sdkp->disk = gd;
2608 sdkp->index = index;
2609 atomic_set(&sdkp->openers, 0);
2610
2611 if (!sdp->request_queue->rq_timeout) {
2612 if (sdp->type != TYPE_MOD)
2613 blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
2614 else
2615 blk_queue_rq_timeout(sdp->request_queue,
2616 SD_MOD_TIMEOUT);
2617 }
2618
2619 device_initialize(&sdkp->dev);
2620 sdkp->dev.parent = dev;
2621 sdkp->dev.class = &sd_disk_class;
2622 dev_set_name(&sdkp->dev, dev_name(dev));
2623
2624 if (device_add(&sdkp->dev))
2625 goto out_free_index;
2626
2627 get_device(dev);
2628 dev_set_drvdata(dev, sdkp);
2629
2630 get_device(&sdkp->dev); /* prevent release before async_schedule */
2631 async_schedule(sd_probe_async, sdkp);
2632
2633 return 0;
2634
2635 out_free_index:
2636 spin_lock(&sd_index_lock);
2637 ida_remove(&sd_index_ida, index);
2638 spin_unlock(&sd_index_lock);
2639 out_put:
2640 put_disk(gd);
2641 out_free:
2642 kfree(sdkp);
2643 out:
2644 return error;
2645}
2646
2647/**
2648 * sd_remove - called whenever a scsi disk (previously recognized by
2649 * sd_probe) is detached from the system. It is called (potentially
2650 * multiple times) during sd module unload.
2651 * @sdp: pointer to mid level scsi device object
2652 *
2653 * Note: this function is invoked from the scsi mid-level.
2654 * This function potentially frees up a device name (e.g. /dev/sdc)
2655 * that could be re-used by a subsequent sd_probe().
2656 * This function is not called when the built-in sd driver is "exit-ed".
2657 **/
2658static int sd_remove(struct device *dev)
2659{
2660 struct scsi_disk *sdkp;
2661
2662 sdkp = dev_get_drvdata(dev);
2663 scsi_autopm_get_device(sdkp->device);
2664
2665 async_synchronize_full();
2666 blk_queue_prep_rq(sdkp->device->request_queue, scsi_prep_fn);
2667 blk_queue_unprep_rq(sdkp->device->request_queue, NULL);
2668 device_del(&sdkp->dev);
2669 del_gendisk(sdkp->disk);
2670 sd_shutdown(dev);
2671
2672 mutex_lock(&sd_ref_mutex);
2673 dev_set_drvdata(dev, NULL);
2674 put_device(&sdkp->dev);
2675 mutex_unlock(&sd_ref_mutex);
2676
2677 return 0;
2678}
2679
2680/**
2681 * scsi_disk_release - Called to free the scsi_disk structure
2682 * @dev: pointer to embedded class device
2683 *
2684 * sd_ref_mutex must be held entering this routine. Because it is
2685 * called on last put, you should always use the scsi_disk_get()
2686 * scsi_disk_put() helpers which manipulate the semaphore directly
2687 * and never do a direct put_device.
2688 **/
2689static void scsi_disk_release(struct device *dev)
2690{
2691 struct scsi_disk *sdkp = to_scsi_disk(dev);
2692 struct gendisk *disk = sdkp->disk;
2693
2694 spin_lock(&sd_index_lock);
2695 ida_remove(&sd_index_ida, sdkp->index);
2696 spin_unlock(&sd_index_lock);
2697
2698 disk->private_data = NULL;
2699 put_disk(disk);
2700 put_device(&sdkp->device->sdev_gendev);
2701
2702 kfree(sdkp);
2703}
2704
2705static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
2706{
2707 unsigned char cmd[6] = { START_STOP }; /* START_VALID */
2708 struct scsi_sense_hdr sshdr;
2709 struct scsi_device *sdp = sdkp->device;
2710 int res;
2711
2712 if (start)
2713 cmd[4] |= 1; /* START */
2714
2715 if (sdp->start_stop_pwr_cond)
2716 cmd[4] |= start ? 1 << 4 : 3 << 4; /* Active or Standby */
2717
2718 if (!scsi_device_online(sdp))
2719 return -ENODEV;
2720
2721 res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
2722 SD_TIMEOUT, SD_MAX_RETRIES, NULL);
2723 if (res) {
2724 sd_printk(KERN_WARNING, sdkp, "START_STOP FAILED\n");
2725 sd_print_result(sdkp, res);
2726 if (driver_byte(res) & DRIVER_SENSE)
2727 sd_print_sense_hdr(sdkp, &sshdr);
2728 }
2729
2730 return res;
2731}
2732
2733/*
2734 * Send a SYNCHRONIZE CACHE instruction down to the device through
2735 * the normal SCSI command structure. Wait for the command to
2736 * complete.
2737 */
2738static void sd_shutdown(struct device *dev)
2739{
2740 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
2741
2742 if (!sdkp)
2743 return; /* this can happen */
2744
2745 if (sdkp->WCE) {
2746 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
2747 sd_sync_cache(sdkp);
2748 }
2749
2750 if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
2751 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
2752 sd_start_stop_device(sdkp, 0);
2753 }
2754
2755 scsi_disk_put(sdkp);
2756}
2757
2758static int sd_suspend(struct device *dev, pm_message_t mesg)
2759{
2760 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
2761 int ret = 0;
2762
2763 if (!sdkp)
2764 return 0; /* this can happen */
2765
2766 if (sdkp->WCE) {
2767 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
2768 ret = sd_sync_cache(sdkp);
2769 if (ret)
2770 goto done;
2771 }
2772
2773 if ((mesg.event & PM_EVENT_SLEEP) && sdkp->device->manage_start_stop) {
2774 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
2775 ret = sd_start_stop_device(sdkp, 0);
2776 }
2777
2778done:
2779 scsi_disk_put(sdkp);
2780 return ret;
2781}
2782
2783static int sd_resume(struct device *dev)
2784{
2785 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
2786 int ret = 0;
2787
2788 if (!sdkp->device->manage_start_stop)
2789 goto done;
2790
2791 sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
2792 ret = sd_start_stop_device(sdkp, 1);
2793
2794done:
2795 scsi_disk_put(sdkp);
2796 return ret;
2797}
2798
2799/**
2800 * init_sd - entry point for this driver (both when built in or when
2801 * a module).
2802 *
2803 * Note: this function registers this driver with the scsi mid-level.
2804 **/
2805static int __init init_sd(void)
2806{
2807 int majors = 0, i, err;
2808
2809 SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
2810
2811 for (i = 0; i < SD_MAJORS; i++)
2812 if (register_blkdev(sd_major(i), "sd") == 0)
2813 majors++;
2814
2815 if (!majors)
2816 return -ENODEV;
2817
2818 err = class_register(&sd_disk_class);
2819 if (err)
2820 goto err_out;
2821
2822 err = scsi_register_driver(&sd_template.gendrv);
2823 if (err)
2824 goto err_out_class;
2825
2826 sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
2827 0, 0, NULL);
2828 if (!sd_cdb_cache) {
2829 printk(KERN_ERR "sd: can't init extended cdb cache\n");
2830 goto err_out_class;
2831 }
2832
2833 sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache);
2834 if (!sd_cdb_pool) {
2835 printk(KERN_ERR "sd: can't init extended cdb pool\n");
2836 goto err_out_cache;
2837 }
2838
2839 return 0;
2840
2841err_out_cache:
2842 kmem_cache_destroy(sd_cdb_cache);
2843
2844err_out_class:
2845 class_unregister(&sd_disk_class);
2846err_out:
2847 for (i = 0; i < SD_MAJORS; i++)
2848 unregister_blkdev(sd_major(i), "sd");
2849 return err;
2850}
2851
2852/**
2853 * exit_sd - exit point for this driver (when it is a module).
2854 *
2855 * Note: this function unregisters this driver from the scsi mid-level.
2856 **/
2857static void __exit exit_sd(void)
2858{
2859 int i;
2860
2861 SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
2862
2863 mempool_destroy(sd_cdb_pool);
2864 kmem_cache_destroy(sd_cdb_cache);
2865
2866 scsi_unregister_driver(&sd_template.gendrv);
2867 class_unregister(&sd_disk_class);
2868
2869 for (i = 0; i < SD_MAJORS; i++)
2870 unregister_blkdev(sd_major(i), "sd");
2871}
2872
2873module_init(init_sd);
2874module_exit(exit_sd);
2875
2876static void sd_print_sense_hdr(struct scsi_disk *sdkp,
2877 struct scsi_sense_hdr *sshdr)
2878{
2879 sd_printk(KERN_INFO, sdkp, " ");
2880 scsi_show_sense_hdr(sshdr);
2881 sd_printk(KERN_INFO, sdkp, " ");
2882 scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
2883}
2884
2885static void sd_print_result(struct scsi_disk *sdkp, int result)
2886{
2887 sd_printk(KERN_INFO, sdkp, " ");
2888 scsi_show_result(result);
2889}
2890