Linux Audio

Check our new training course

Loading...
v6.2
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * MPC8378E MDS Device Tree Source
  4 *
  5 * Copyright 2007 Freescale Semiconductor Inc.
 
 
 
 
 
  6 */
  7
  8/dts-v1/;
  9
 10/ {
 11	model = "fsl,mpc8378emds";
 12	compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
 13	#address-cells = <1>;
 14	#size-cells = <1>;
 15
 16	aliases {
 17		ethernet0 = &enet0;
 18		ethernet1 = &enet1;
 19		serial0 = &serial0;
 20		serial1 = &serial1;
 21		pci0 = &pci0;
 22		pci1 = &pci1;
 23		pci2 = &pci2;
 24	};
 25
 26	cpus {
 27		#address-cells = <1>;
 28		#size-cells = <0>;
 29
 30		PowerPC,8378@0 {
 31			device_type = "cpu";
 32			reg = <0x0>;
 33			d-cache-line-size = <32>;
 34			i-cache-line-size = <32>;
 35			d-cache-size = <32768>;
 36			i-cache-size = <32768>;
 37			timebase-frequency = <0>;
 38			bus-frequency = <0>;
 39			clock-frequency = <0>;
 40		};
 41	};
 42
 43	memory {
 44		device_type = "memory";
 45		reg = <0x00000000 0x20000000>;	// 512MB at 0
 46	};
 47
 48	localbus@e0005000 {
 49		#address-cells = <2>;
 50		#size-cells = <1>;
 51		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
 52		reg = <0xe0005000 0x1000>;
 53		interrupts = <77 0x8>;
 54		interrupt-parent = <&ipic>;
 55
 56		// booting from NOR flash
 57		ranges = <0 0x0 0xfe000000 0x02000000
 58		          1 0x0 0xf8000000 0x00008000
 59		          3 0x0 0xe0600000 0x00008000>;
 60
 61		flash@0,0 {
 62			#address-cells = <1>;
 63			#size-cells = <1>;
 64			compatible = "cfi-flash";
 65			reg = <0 0x0 0x2000000>;
 66			bank-width = <2>;
 67			device-width = <1>;
 68
 69			u-boot@0 {
 70				reg = <0x0 0x100000>;
 71				read-only;
 72			};
 73
 74			fs@100000 {
 75				reg = <0x100000 0x800000>;
 76			};
 77
 78			kernel@1d00000 {
 79				reg = <0x1d00000 0x200000>;
 80			};
 81
 82			dtb@1f00000 {
 83				reg = <0x1f00000 0x100000>;
 84			};
 85		};
 86
 87		bcsr@1,0 {
 88			reg = <1 0x0 0x8000>;
 89			compatible = "fsl,mpc837xmds-bcsr";
 90		};
 91
 92		nand@3,0 {
 93			#address-cells = <1>;
 94			#size-cells = <1>;
 95			compatible = "fsl,mpc8378-fcm-nand",
 96			             "fsl,elbc-fcm-nand";
 97			reg = <3 0x0 0x8000>;
 98
 99			u-boot@0 {
100				reg = <0x0 0x100000>;
101				read-only;
102			};
103
104			kernel@100000 {
105				reg = <0x100000 0x300000>;
106			};
107
108			fs@400000 {
109				reg = <0x400000 0x1c00000>;
110			};
111		};
112	};
113
114	soc@e0000000 {
115		#address-cells = <1>;
116		#size-cells = <1>;
117		device_type = "soc";
118		compatible = "simple-bus";
119		ranges = <0x0 0xe0000000 0x00100000>;
120		reg = <0xe0000000 0x00000200>;
121		bus-frequency = <0>;
122
123		wdt@200 {
124			compatible = "mpc83xx_wdt";
125			reg = <0x200 0x100>;
126		};
127
128		sleep-nexus {
129			#address-cells = <1>;
130			#size-cells = <1>;
131			compatible = "simple-bus";
132			sleep = <&pmc 0x0c000000>;
133			ranges;
134
135			i2c@3000 {
136				#address-cells = <1>;
137				#size-cells = <0>;
138				cell-index = <0>;
139				compatible = "fsl-i2c";
140				reg = <0x3000 0x100>;
141				interrupts = <14 0x8>;
142				interrupt-parent = <&ipic>;
143				dfsrr;
144
145				rtc@68 {
146					compatible = "dallas,ds1374";
147					reg = <0x68>;
148					interrupts = <19 0x8>;
149					interrupt-parent = <&ipic>;
150				};
151			};
152
153			sdhci@2e000 {
154				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
155				reg = <0x2e000 0x1000>;
156				interrupts = <42 0x8>;
157				interrupt-parent = <&ipic>;
158				sdhci,wp-inverted;
159				/* Filled in by U-Boot */
160				clock-frequency = <0>;
161			};
162		};
163
164		i2c@3100 {
165			#address-cells = <1>;
166			#size-cells = <0>;
167			cell-index = <1>;
168			compatible = "fsl-i2c";
169			reg = <0x3100 0x100>;
170			interrupts = <15 0x8>;
171			interrupt-parent = <&ipic>;
172			dfsrr;
173		};
174
175		spi@7000 {
176			cell-index = <0>;
177			compatible = "fsl,spi";
178			reg = <0x7000 0x1000>;
179			interrupts = <16 0x8>;
180			interrupt-parent = <&ipic>;
181			mode = "cpu";
182		};
183
184		dma@82a8 {
185			#address-cells = <1>;
186			#size-cells = <1>;
187			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
188			reg = <0x82a8 4>;
189			ranges = <0 0x8100 0x1a8>;
190			interrupt-parent = <&ipic>;
191			interrupts = <71 8>;
192			cell-index = <0>;
193			dma-channel@0 {
194				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
195				reg = <0 0x80>;
196				cell-index = <0>;
197				interrupt-parent = <&ipic>;
198				interrupts = <71 8>;
199			};
200			dma-channel@80 {
201				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
202				reg = <0x80 0x80>;
203				cell-index = <1>;
204				interrupt-parent = <&ipic>;
205				interrupts = <71 8>;
206			};
207			dma-channel@100 {
208				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
209				reg = <0x100 0x80>;
210				cell-index = <2>;
211				interrupt-parent = <&ipic>;
212				interrupts = <71 8>;
213			};
214			dma-channel@180 {
215				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
216				reg = <0x180 0x28>;
217				cell-index = <3>;
218				interrupt-parent = <&ipic>;
219				interrupts = <71 8>;
220			};
221		};
222
223		usb@23000 {
224			compatible = "fsl-usb2-dr";
225			reg = <0x23000 0x1000>;
226			#address-cells = <1>;
227			#size-cells = <0>;
228			interrupt-parent = <&ipic>;
229			interrupts = <38 0x8>;
230			dr_mode = "host";
231			phy_type = "ulpi";
232			sleep = <&pmc 0x00c00000>;
233		};
234
235		enet0: ethernet@24000 {
236			#address-cells = <1>;
237			#size-cells = <1>;
238			cell-index = <0>;
239			device_type = "network";
240			model = "eTSEC";
241			compatible = "gianfar";
242			reg = <0x24000 0x1000>;
243			ranges = <0x0 0x24000 0x1000>;
244			local-mac-address = [ 00 00 00 00 00 00 ];
245			interrupts = <32 0x8 33 0x8 34 0x8>;
246			phy-connection-type = "mii";
247			interrupt-parent = <&ipic>;
248			tbi-handle = <&tbi0>;
249			phy-handle = <&phy2>;
250			sleep = <&pmc 0xc0000000>;
251			fsl,magic-packet;
252
253			mdio@520 {
254				#address-cells = <1>;
255				#size-cells = <0>;
256				compatible = "fsl,gianfar-mdio";
257				reg = <0x520 0x20>;
258
259				phy2: ethernet-phy@2 {
260					interrupt-parent = <&ipic>;
261					interrupts = <17 0x8>;
262					reg = <0x2>;
 
263				};
264
265				phy3: ethernet-phy@3 {
266					interrupt-parent = <&ipic>;
267					interrupts = <18 0x8>;
268					reg = <0x3>;
 
269				};
270
271				tbi0: tbi-phy@11 {
272					reg = <0x11>;
273					device_type = "tbi-phy";
274				};
275			};
276		};
277
278		enet1: ethernet@25000 {
279			#address-cells = <1>;
280			#size-cells = <1>;
281			cell-index = <1>;
282			device_type = "network";
283			model = "eTSEC";
284			compatible = "gianfar";
285			reg = <0x25000 0x1000>;
286			ranges = <0x0 0x25000 0x1000>;
287			local-mac-address = [ 00 00 00 00 00 00 ];
288			interrupts = <35 0x8 36 0x8 37 0x8>;
289			phy-connection-type = "mii";
290			interrupt-parent = <&ipic>;
291			tbi-handle = <&tbi1>;
292			phy-handle = <&phy3>;
293			sleep = <&pmc 0x30000000>;
294			fsl,magic-packet;
295
296			mdio@520 {
297				#address-cells = <1>;
298				#size-cells = <0>;
299				compatible = "fsl,gianfar-tbi";
300				reg = <0x520 0x20>;
301
302				tbi1: tbi-phy@11 {
303					reg = <0x11>;
304					device_type = "tbi-phy";
305				};
306			};
307		};
308
309		serial0: serial@4500 {
310			cell-index = <0>;
311			device_type = "serial";
312			compatible = "fsl,ns16550", "ns16550";
313			reg = <0x4500 0x100>;
314			clock-frequency = <0>;
315			interrupts = <9 0x8>;
316			interrupt-parent = <&ipic>;
317		};
318
319		serial1: serial@4600 {
320			cell-index = <1>;
321			device_type = "serial";
322			compatible = "fsl,ns16550", "ns16550";
323			reg = <0x4600 0x100>;
324			clock-frequency = <0>;
325			interrupts = <10 0x8>;
326			interrupt-parent = <&ipic>;
327		};
328
329		crypto@30000 {
330			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
331				     "fsl,sec2.1", "fsl,sec2.0";
332			reg = <0x30000 0x10000>;
333			interrupts = <11 0x8>;
334			interrupt-parent = <&ipic>;
335			fsl,num-channels = <4>;
336			fsl,channel-fifo-len = <24>;
337			fsl,exec-units-mask = <0x9fe>;
338			fsl,descriptor-types-mask = <0x3ab0ebf>;
339			sleep = <&pmc 0x03000000>;
340		};
341
342		/* IPIC
343		 * interrupts cell = <intr #, sense>
344		 * sense values match linux IORESOURCE_IRQ_* defines:
345		 * sense == 8: Level, low assertion
346		 * sense == 2: Edge, high-to-low change
347		 */
348		ipic: pic@700 {
349			compatible = "fsl,ipic";
350			interrupt-controller;
351			#address-cells = <0>;
352			#interrupt-cells = <2>;
353			reg = <0x700 0x100>;
354		};
355
356		pmc: power@b00 {
357			compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
358			reg = <0xb00 0x100 0xa00 0x100>;
359			interrupts = <80 0x8>;
360			interrupt-parent = <&ipic>;
361		};
362	};
363
364	pci0: pci@e0008500 {
365		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
366		interrupt-map = <
367
368				/* IDSEL 0x11 */
369				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
370				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
371				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
372				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
373
374				/* IDSEL 0x12 */
375				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
376				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
377				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
378				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
379
380				/* IDSEL 0x13 */
381				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
382				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
383				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
384				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
385
386				/* IDSEL 0x15 */
387				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
388				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
389				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
390				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
391
392				/* IDSEL 0x16 */
393				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
394				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
395				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
396				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
397
398				/* IDSEL 0x17 */
399				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
400				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
401				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
402				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
403
404				/* IDSEL 0x18 */
405				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
406				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
407				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
408				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
409		interrupt-parent = <&ipic>;
410		interrupts = <66 0x8>;
411		bus-range = <0x0 0x0>;
412		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
413		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
414		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
415		clock-frequency = <0>;
416		sleep = <&pmc 0x00010000>;
417		#interrupt-cells = <1>;
418		#size-cells = <2>;
419		#address-cells = <3>;
420		reg = <0xe0008500 0x100		/* internal registers */
421		       0xe0008300 0x8>;		/* config space access registers */
422		compatible = "fsl,mpc8349-pci";
423		device_type = "pci";
424	};
425
426	pci1: pcie@e0009000 {
427		#address-cells = <3>;
428		#size-cells = <2>;
429		#interrupt-cells = <1>;
430		device_type = "pci";
431		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
432		reg = <0xe0009000 0x00001000>;
433		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
434		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
435		bus-range = <0 255>;
436		interrupt-map-mask = <0xf800 0 0 7>;
437		interrupt-map = <0 0 0 1 &ipic 1 8
438				 0 0 0 2 &ipic 1 8
439				 0 0 0 3 &ipic 1 8
440				 0 0 0 4 &ipic 1 8>;
441		sleep = <&pmc 0x00300000>;
442		clock-frequency = <0>;
443
444		pcie@0 {
445			#address-cells = <3>;
446			#size-cells = <2>;
447			device_type = "pci";
448			reg = <0 0 0 0 0>;
449			ranges = <0x02000000 0 0xa8000000
450				  0x02000000 0 0xa8000000
451				  0 0x10000000
452				  0x01000000 0 0x00000000
453				  0x01000000 0 0x00000000
454				  0 0x00800000>;
455		};
456	};
457
458	pci2: pcie@e000a000 {
459		#address-cells = <3>;
460		#size-cells = <2>;
461		#interrupt-cells = <1>;
462		device_type = "pci";
463		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
464		reg = <0xe000a000 0x00001000>;
465		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
466			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
467		bus-range = <0 255>;
468		interrupt-map-mask = <0xf800 0 0 7>;
469		interrupt-map = <0 0 0 1 &ipic 2 8
470				 0 0 0 2 &ipic 2 8
471				 0 0 0 3 &ipic 2 8
472				 0 0 0 4 &ipic 2 8>;
473		sleep = <&pmc 0x000c0000>;
474		clock-frequency = <0>;
475
476		pcie@0 {
477			#address-cells = <3>;
478			#size-cells = <2>;
479			device_type = "pci";
480			reg = <0 0 0 0 0>;
481			ranges = <0x02000000 0 0xc8000000
482				  0x02000000 0 0xc8000000
483				  0 0x10000000
484				  0x01000000 0 0x00000000
485				  0x01000000 0 0x00000000
486				  0 0x00800000>;
487		};
488	};
489};
v3.1
 
  1/*
  2 * MPC8378E MDS Device Tree Source
  3 *
  4 * Copyright 2007 Freescale Semiconductor Inc.
  5 *
  6 * This program is free software; you can redistribute  it and/or modify it
  7 * under  the terms of  the GNU General  Public License as published by the
  8 * Free Software Foundation;  either version 2 of the  License, or (at your
  9 * option) any later version.
 10 */
 11
 12/dts-v1/;
 13
 14/ {
 15	model = "fsl,mpc8378emds";
 16	compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
 17	#address-cells = <1>;
 18	#size-cells = <1>;
 19
 20	aliases {
 21		ethernet0 = &enet0;
 22		ethernet1 = &enet1;
 23		serial0 = &serial0;
 24		serial1 = &serial1;
 25		pci0 = &pci0;
 26		pci1 = &pci1;
 27		pci2 = &pci2;
 28	};
 29
 30	cpus {
 31		#address-cells = <1>;
 32		#size-cells = <0>;
 33
 34		PowerPC,8378@0 {
 35			device_type = "cpu";
 36			reg = <0x0>;
 37			d-cache-line-size = <32>;
 38			i-cache-line-size = <32>;
 39			d-cache-size = <32768>;
 40			i-cache-size = <32768>;
 41			timebase-frequency = <0>;
 42			bus-frequency = <0>;
 43			clock-frequency = <0>;
 44		};
 45	};
 46
 47	memory {
 48		device_type = "memory";
 49		reg = <0x00000000 0x20000000>;	// 512MB at 0
 50	};
 51
 52	localbus@e0005000 {
 53		#address-cells = <2>;
 54		#size-cells = <1>;
 55		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
 56		reg = <0xe0005000 0x1000>;
 57		interrupts = <77 0x8>;
 58		interrupt-parent = <&ipic>;
 59
 60		// booting from NOR flash
 61		ranges = <0 0x0 0xfe000000 0x02000000
 62		          1 0x0 0xf8000000 0x00008000
 63		          3 0x0 0xe0600000 0x00008000>;
 64
 65		flash@0,0 {
 66			#address-cells = <1>;
 67			#size-cells = <1>;
 68			compatible = "cfi-flash";
 69			reg = <0 0x0 0x2000000>;
 70			bank-width = <2>;
 71			device-width = <1>;
 72
 73			u-boot@0 {
 74				reg = <0x0 0x100000>;
 75				read-only;
 76			};
 77
 78			fs@100000 {
 79				reg = <0x100000 0x800000>;
 80			};
 81
 82			kernel@1d00000 {
 83				reg = <0x1d00000 0x200000>;
 84			};
 85
 86			dtb@1f00000 {
 87				reg = <0x1f00000 0x100000>;
 88			};
 89		};
 90
 91		bcsr@1,0 {
 92			reg = <1 0x0 0x8000>;
 93			compatible = "fsl,mpc837xmds-bcsr";
 94		};
 95
 96		nand@3,0 {
 97			#address-cells = <1>;
 98			#size-cells = <1>;
 99			compatible = "fsl,mpc8378-fcm-nand",
100			             "fsl,elbc-fcm-nand";
101			reg = <3 0x0 0x8000>;
102
103			u-boot@0 {
104				reg = <0x0 0x100000>;
105				read-only;
106			};
107
108			kernel@100000 {
109				reg = <0x100000 0x300000>;
110			};
111
112			fs@400000 {
113				reg = <0x400000 0x1c00000>;
114			};
115		};
116	};
117
118	soc@e0000000 {
119		#address-cells = <1>;
120		#size-cells = <1>;
121		device_type = "soc";
122		compatible = "simple-bus";
123		ranges = <0x0 0xe0000000 0x00100000>;
124		reg = <0xe0000000 0x00000200>;
125		bus-frequency = <0>;
126
127		wdt@200 {
128			compatible = "mpc83xx_wdt";
129			reg = <0x200 0x100>;
130		};
131
132		sleep-nexus {
133			#address-cells = <1>;
134			#size-cells = <1>;
135			compatible = "simple-bus";
136			sleep = <&pmc 0x0c000000>;
137			ranges;
138
139			i2c@3000 {
140				#address-cells = <1>;
141				#size-cells = <0>;
142				cell-index = <0>;
143				compatible = "fsl-i2c";
144				reg = <0x3000 0x100>;
145				interrupts = <14 0x8>;
146				interrupt-parent = <&ipic>;
147				dfsrr;
148
149				rtc@68 {
150					compatible = "dallas,ds1374";
151					reg = <0x68>;
152					interrupts = <19 0x8>;
153					interrupt-parent = <&ipic>;
154				};
155			};
156
157			sdhci@2e000 {
158				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
159				reg = <0x2e000 0x1000>;
160				interrupts = <42 0x8>;
161				interrupt-parent = <&ipic>;
162				sdhci,wp-inverted;
163				/* Filled in by U-Boot */
164				clock-frequency = <0>;
165			};
166		};
167
168		i2c@3100 {
169			#address-cells = <1>;
170			#size-cells = <0>;
171			cell-index = <1>;
172			compatible = "fsl-i2c";
173			reg = <0x3100 0x100>;
174			interrupts = <15 0x8>;
175			interrupt-parent = <&ipic>;
176			dfsrr;
177		};
178
179		spi@7000 {
180			cell-index = <0>;
181			compatible = "fsl,spi";
182			reg = <0x7000 0x1000>;
183			interrupts = <16 0x8>;
184			interrupt-parent = <&ipic>;
185			mode = "cpu";
186		};
187
188		dma@82a8 {
189			#address-cells = <1>;
190			#size-cells = <1>;
191			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
192			reg = <0x82a8 4>;
193			ranges = <0 0x8100 0x1a8>;
194			interrupt-parent = <&ipic>;
195			interrupts = <71 8>;
196			cell-index = <0>;
197			dma-channel@0 {
198				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
199				reg = <0 0x80>;
200				cell-index = <0>;
201				interrupt-parent = <&ipic>;
202				interrupts = <71 8>;
203			};
204			dma-channel@80 {
205				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
206				reg = <0x80 0x80>;
207				cell-index = <1>;
208				interrupt-parent = <&ipic>;
209				interrupts = <71 8>;
210			};
211			dma-channel@100 {
212				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
213				reg = <0x100 0x80>;
214				cell-index = <2>;
215				interrupt-parent = <&ipic>;
216				interrupts = <71 8>;
217			};
218			dma-channel@180 {
219				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
220				reg = <0x180 0x28>;
221				cell-index = <3>;
222				interrupt-parent = <&ipic>;
223				interrupts = <71 8>;
224			};
225		};
226
227		usb@23000 {
228			compatible = "fsl-usb2-dr";
229			reg = <0x23000 0x1000>;
230			#address-cells = <1>;
231			#size-cells = <0>;
232			interrupt-parent = <&ipic>;
233			interrupts = <38 0x8>;
234			dr_mode = "host";
235			phy_type = "ulpi";
236			sleep = <&pmc 0x00c00000>;
237		};
238
239		enet0: ethernet@24000 {
240			#address-cells = <1>;
241			#size-cells = <1>;
242			cell-index = <0>;
243			device_type = "network";
244			model = "eTSEC";
245			compatible = "gianfar";
246			reg = <0x24000 0x1000>;
247			ranges = <0x0 0x24000 0x1000>;
248			local-mac-address = [ 00 00 00 00 00 00 ];
249			interrupts = <32 0x8 33 0x8 34 0x8>;
250			phy-connection-type = "mii";
251			interrupt-parent = <&ipic>;
252			tbi-handle = <&tbi0>;
253			phy-handle = <&phy2>;
254			sleep = <&pmc 0xc0000000>;
255			fsl,magic-packet;
256
257			mdio@520 {
258				#address-cells = <1>;
259				#size-cells = <0>;
260				compatible = "fsl,gianfar-mdio";
261				reg = <0x520 0x20>;
262
263				phy2: ethernet-phy@2 {
264					interrupt-parent = <&ipic>;
265					interrupts = <17 0x8>;
266					reg = <0x2>;
267					device_type = "ethernet-phy";
268				};
269
270				phy3: ethernet-phy@3 {
271					interrupt-parent = <&ipic>;
272					interrupts = <18 0x8>;
273					reg = <0x3>;
274					device_type = "ethernet-phy";
275				};
276
277				tbi0: tbi-phy@11 {
278					reg = <0x11>;
279					device_type = "tbi-phy";
280				};
281			};
282		};
283
284		enet1: ethernet@25000 {
285			#address-cells = <1>;
286			#size-cells = <1>;
287			cell-index = <1>;
288			device_type = "network";
289			model = "eTSEC";
290			compatible = "gianfar";
291			reg = <0x25000 0x1000>;
292			ranges = <0x0 0x25000 0x1000>;
293			local-mac-address = [ 00 00 00 00 00 00 ];
294			interrupts = <35 0x8 36 0x8 37 0x8>;
295			phy-connection-type = "mii";
296			interrupt-parent = <&ipic>;
297			tbi-handle = <&tbi1>;
298			phy-handle = <&phy3>;
299			sleep = <&pmc 0x30000000>;
300			fsl,magic-packet;
301
302			mdio@520 {
303				#address-cells = <1>;
304				#size-cells = <0>;
305				compatible = "fsl,gianfar-tbi";
306				reg = <0x520 0x20>;
307
308				tbi1: tbi-phy@11 {
309					reg = <0x11>;
310					device_type = "tbi-phy";
311				};
312			};
313		};
314
315		serial0: serial@4500 {
316			cell-index = <0>;
317			device_type = "serial";
318			compatible = "ns16550";
319			reg = <0x4500 0x100>;
320			clock-frequency = <0>;
321			interrupts = <9 0x8>;
322			interrupt-parent = <&ipic>;
323		};
324
325		serial1: serial@4600 {
326			cell-index = <1>;
327			device_type = "serial";
328			compatible = "ns16550";
329			reg = <0x4600 0x100>;
330			clock-frequency = <0>;
331			interrupts = <10 0x8>;
332			interrupt-parent = <&ipic>;
333		};
334
335		crypto@30000 {
336			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
337				     "fsl,sec2.1", "fsl,sec2.0";
338			reg = <0x30000 0x10000>;
339			interrupts = <11 0x8>;
340			interrupt-parent = <&ipic>;
341			fsl,num-channels = <4>;
342			fsl,channel-fifo-len = <24>;
343			fsl,exec-units-mask = <0x9fe>;
344			fsl,descriptor-types-mask = <0x3ab0ebf>;
345			sleep = <&pmc 0x03000000>;
346		};
347
348		/* IPIC
349		 * interrupts cell = <intr #, sense>
350		 * sense values match linux IORESOURCE_IRQ_* defines:
351		 * sense == 8: Level, low assertion
352		 * sense == 2: Edge, high-to-low change
353		 */
354		ipic: pic@700 {
355			compatible = "fsl,ipic";
356			interrupt-controller;
357			#address-cells = <0>;
358			#interrupt-cells = <2>;
359			reg = <0x700 0x100>;
360		};
361
362		pmc: power@b00 {
363			compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
364			reg = <0xb00 0x100 0xa00 0x100>;
365			interrupts = <80 0x8>;
366			interrupt-parent = <&ipic>;
367		};
368	};
369
370	pci0: pci@e0008500 {
371		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
372		interrupt-map = <
373
374				/* IDSEL 0x11 */
375				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
376				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
377				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
378				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
379
380				/* IDSEL 0x12 */
381				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
382				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
383				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
384				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
385
386				/* IDSEL 0x13 */
387				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
388				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
389				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
390				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
391
392				/* IDSEL 0x15 */
393				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
394				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
395				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
396				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
397
398				/* IDSEL 0x16 */
399				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
400				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
401				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
402				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
403
404				/* IDSEL 0x17 */
405				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
406				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
407				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
408				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
409
410				/* IDSEL 0x18 */
411				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
412				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
413				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
414				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
415		interrupt-parent = <&ipic>;
416		interrupts = <66 0x8>;
417		bus-range = <0x0 0x0>;
418		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
419		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
420		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
421		clock-frequency = <0>;
422		sleep = <&pmc 0x00010000>;
423		#interrupt-cells = <1>;
424		#size-cells = <2>;
425		#address-cells = <3>;
426		reg = <0xe0008500 0x100		/* internal registers */
427		       0xe0008300 0x8>;		/* config space access registers */
428		compatible = "fsl,mpc8349-pci";
429		device_type = "pci";
430	};
431
432	pci1: pcie@e0009000 {
433		#address-cells = <3>;
434		#size-cells = <2>;
435		#interrupt-cells = <1>;
436		device_type = "pci";
437		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
438		reg = <0xe0009000 0x00001000>;
439		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
440		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
441		bus-range = <0 255>;
442		interrupt-map-mask = <0xf800 0 0 7>;
443		interrupt-map = <0 0 0 1 &ipic 1 8
444				 0 0 0 2 &ipic 1 8
445				 0 0 0 3 &ipic 1 8
446				 0 0 0 4 &ipic 1 8>;
447		sleep = <&pmc 0x00300000>;
448		clock-frequency = <0>;
449
450		pcie@0 {
451			#address-cells = <3>;
452			#size-cells = <2>;
453			device_type = "pci";
454			reg = <0 0 0 0 0>;
455			ranges = <0x02000000 0 0xa8000000
456				  0x02000000 0 0xa8000000
457				  0 0x10000000
458				  0x01000000 0 0x00000000
459				  0x01000000 0 0x00000000
460				  0 0x00800000>;
461		};
462	};
463
464	pci2: pcie@e000a000 {
465		#address-cells = <3>;
466		#size-cells = <2>;
467		#interrupt-cells = <1>;
468		device_type = "pci";
469		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
470		reg = <0xe000a000 0x00001000>;
471		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
472			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
473		bus-range = <0 255>;
474		interrupt-map-mask = <0xf800 0 0 7>;
475		interrupt-map = <0 0 0 1 &ipic 2 8
476				 0 0 0 2 &ipic 2 8
477				 0 0 0 3 &ipic 2 8
478				 0 0 0 4 &ipic 2 8>;
479		sleep = <&pmc 0x000c0000>;
480		clock-frequency = <0>;
481
482		pcie@0 {
483			#address-cells = <3>;
484			#size-cells = <2>;
485			device_type = "pci";
486			reg = <0 0 0 0 0>;
487			ranges = <0x02000000 0 0xc8000000
488				  0x02000000 0 0xc8000000
489				  0 0x10000000
490				  0x01000000 0 0x00000000
491				  0x01000000 0 0x00000000
492				  0 0x00800000>;
493		};
494	};
495};