Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * Copyright (C) 2016 Imagination Technologies
  4 * Author: Paul Burton <paul.burton@mips.com>
  5 */
  6
  7#include <linux/clk.h>
  8#include <linux/clocksource.h>
  9#include <linux/init.h>
 10#include <linux/irqchip.h>
 11#include <linux/of_clk.h>
 12#include <linux/of_fdt.h>
 13
 14#include <asm/bootinfo.h>
 15#include <asm/fw/fw.h>
 16#include <asm/irq_cpu.h>
 17#include <asm/machine.h>
 18#include <asm/mips-cps.h>
 19#include <asm/prom.h>
 20#include <asm/smp-ops.h>
 21#include <asm/time.h>
 22
 23static __initconst const void *fdt;
 24static __initconst const struct mips_machine *mach;
 25static __initconst const void *mach_match_data;
 26
 27void __init prom_init(void)
 28{
 29	plat_get_fdt();
 30	BUG_ON(!fdt);
 31}
 32
 33void __init *plat_get_fdt(void)
 34{
 35	const struct mips_machine *check_mach;
 36	const struct of_device_id *match;
 37
 38	if (fdt)
 39		/* Already set up */
 40		return (void *)fdt;
 41
 42	fdt = (void *)get_fdt();
 43	if (fdt && !fdt_check_header(fdt)) {
 44		/*
 45		 * We have been provided with the appropriate device tree for
 46		 * the board. Make use of it & search for any machine struct
 47		 * based upon the root compatible string.
 48		 */
 49		for_each_mips_machine(check_mach) {
 50			match = mips_machine_is_compatible(check_mach, fdt);
 51			if (match) {
 52				mach = check_mach;
 53				mach_match_data = match->data;
 54				break;
 55			}
 56		}
 57	} else if (IS_ENABLED(CONFIG_LEGACY_BOARDS)) {
 58		/*
 59		 * We weren't booted using the UHI boot protocol, but do
 60		 * support some number of boards with legacy boot protocols.
 61		 * Attempt to find the right one.
 62		 */
 63		for_each_mips_machine(check_mach) {
 64			if (!check_mach->detect)
 65				continue;
 66
 67			if (!check_mach->detect())
 68				continue;
 69
 70			mach = check_mach;
 71		}
 72
 73		/*
 74		 * If we don't recognise the machine then we can't continue, so
 75		 * die here.
 76		 */
 77		BUG_ON(!mach);
 78
 79		/* Retrieve the machine's FDT */
 80		fdt = mach->fdt;
 81	}
 82	return (void *)fdt;
 83}
 84
 85#ifdef CONFIG_RELOCATABLE
 86
 87void __init plat_fdt_relocated(void *new_location)
 88{
 89	/*
 90	 * reset fdt as the cached value would point to the location
 91	 * before relocations happened and update the location argument
 92	 * if it was passed using UHI
 93	 */
 94	fdt = NULL;
 95
 96	if (fw_arg0 == -2)
 97		fw_arg1 = (unsigned long)new_location;
 98}
 99
100#endif /* CONFIG_RELOCATABLE */
101
102void __init plat_mem_setup(void)
103{
104	if (mach && mach->fixup_fdt)
105		fdt = mach->fixup_fdt(fdt, mach_match_data);
106
107	fw_init_cmdline();
108	__dt_setup_arch((void *)fdt);
109}
110
111void __init device_tree_init(void)
112{
113	unflatten_and_copy_device_tree();
114	mips_cpc_probe();
115
116	if (!register_cps_smp_ops())
117		return;
118	if (!register_vsmp_smp_ops())
119		return;
120
121	register_up_smp_ops();
122}
123
124int __init apply_mips_fdt_fixups(void *fdt_out, size_t fdt_out_size,
125				 const void *fdt_in,
126				 const struct mips_fdt_fixup *fixups)
127{
128	int err;
129
130	err = fdt_open_into(fdt_in, fdt_out, fdt_out_size);
131	if (err) {
132		pr_err("Failed to open FDT\n");
133		return err;
134	}
135
136	for (; fixups->apply; fixups++) {
137		err = fixups->apply(fdt_out);
138		if (err) {
139			pr_err("Failed to apply FDT fixup \"%s\"\n",
140			       fixups->description);
141			return err;
142		}
143	}
144
145	err = fdt_pack(fdt_out);
146	if (err)
147		pr_err("Failed to pack FDT\n");
148	return err;
149}
150
151void __init plat_time_init(void)
152{
153	struct device_node *np;
154	struct clk *clk;
155
156	of_clk_init(NULL);
157
158	if (!cpu_has_counter) {
159		mips_hpt_frequency = 0;
160	} else if (mach && mach->measure_hpt_freq) {
161		mips_hpt_frequency = mach->measure_hpt_freq();
162	} else {
163		np = of_get_cpu_node(0, NULL);
164		if (!np) {
165			pr_err("Failed to get CPU node\n");
166			return;
167		}
168
169		clk = of_clk_get(np, 0);
170		if (IS_ERR(clk)) {
171			pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
172			return;
173		}
174
175		mips_hpt_frequency = clk_get_rate(clk);
176		clk_put(clk);
177
178		switch (boot_cpu_type()) {
179		case CPU_20KC:
180		case CPU_25KF:
181			/* The counter runs at the CPU clock rate */
182			break;
183		default:
184			/* The counter runs at half the CPU clock rate */
185			mips_hpt_frequency /= 2;
186			break;
187		}
188	}
189
190	timer_probe();
191}
192
193void __init arch_init_irq(void)
194{
195	struct device_node *intc_node;
196
197	intc_node = of_find_compatible_node(NULL, NULL,
198					    "mti,cpu-interrupt-controller");
199	if (!cpu_has_veic && !intc_node)
200		mips_cpu_irq_init();
201	of_node_put(intc_node);
202
203	irqchip_init();
204}