Loading...
1/*
2 * Shared part of driver for MMC/SDHC controller on Cavium OCTEON and
3 * ThunderX SOCs.
4 *
5 * This file is subject to the terms and conditions of the GNU General Public
6 * License. See the file "COPYING" in the main directory of this archive
7 * for more details.
8 *
9 * Copyright (C) 2012-2017 Cavium Inc.
10 * Authors:
11 * David Daney <david.daney@cavium.com>
12 * Peter Swain <pswain@cavium.com>
13 * Steven J. Hill <steven.hill@cavium.com>
14 * Jan Glauber <jglauber@cavium.com>
15 */
16#include <linux/bitfield.h>
17#include <linux/delay.h>
18#include <linux/dma-direction.h>
19#include <linux/dma-mapping.h>
20#include <linux/gpio/consumer.h>
21#include <linux/interrupt.h>
22#include <linux/mmc/mmc.h>
23#include <linux/mmc/slot-gpio.h>
24#include <linux/module.h>
25#include <linux/regulator/consumer.h>
26#include <linux/scatterlist.h>
27#include <linux/time.h>
28
29#include "cavium.h"
30
31const char *cvm_mmc_irq_names[] = {
32 "MMC Buffer",
33 "MMC Command",
34 "MMC DMA",
35 "MMC Command Error",
36 "MMC DMA Error",
37 "MMC Switch",
38 "MMC Switch Error",
39 "MMC DMA int Fifo",
40 "MMC DMA int",
41};
42
43/*
44 * The Cavium MMC host hardware assumes that all commands have fixed
45 * command and response types. These are correct if MMC devices are
46 * being used. However, non-MMC devices like SD use command and
47 * response types that are unexpected by the host hardware.
48 *
49 * The command and response types can be overridden by supplying an
50 * XOR value that is applied to the type. We calculate the XOR value
51 * from the values in this table and the flags passed from the MMC
52 * core.
53 */
54static struct cvm_mmc_cr_type cvm_mmc_cr_types[] = {
55 {0, 0}, /* CMD0 */
56 {0, 3}, /* CMD1 */
57 {0, 2}, /* CMD2 */
58 {0, 1}, /* CMD3 */
59 {0, 0}, /* CMD4 */
60 {0, 1}, /* CMD5 */
61 {0, 1}, /* CMD6 */
62 {0, 1}, /* CMD7 */
63 {1, 1}, /* CMD8 */
64 {0, 2}, /* CMD9 */
65 {0, 2}, /* CMD10 */
66 {1, 1}, /* CMD11 */
67 {0, 1}, /* CMD12 */
68 {0, 1}, /* CMD13 */
69 {1, 1}, /* CMD14 */
70 {0, 0}, /* CMD15 */
71 {0, 1}, /* CMD16 */
72 {1, 1}, /* CMD17 */
73 {1, 1}, /* CMD18 */
74 {3, 1}, /* CMD19 */
75 {2, 1}, /* CMD20 */
76 {0, 0}, /* CMD21 */
77 {0, 0}, /* CMD22 */
78 {0, 1}, /* CMD23 */
79 {2, 1}, /* CMD24 */
80 {2, 1}, /* CMD25 */
81 {2, 1}, /* CMD26 */
82 {2, 1}, /* CMD27 */
83 {0, 1}, /* CMD28 */
84 {0, 1}, /* CMD29 */
85 {1, 1}, /* CMD30 */
86 {1, 1}, /* CMD31 */
87 {0, 0}, /* CMD32 */
88 {0, 0}, /* CMD33 */
89 {0, 0}, /* CMD34 */
90 {0, 1}, /* CMD35 */
91 {0, 1}, /* CMD36 */
92 {0, 0}, /* CMD37 */
93 {0, 1}, /* CMD38 */
94 {0, 4}, /* CMD39 */
95 {0, 5}, /* CMD40 */
96 {0, 0}, /* CMD41 */
97 {2, 1}, /* CMD42 */
98 {0, 0}, /* CMD43 */
99 {0, 0}, /* CMD44 */
100 {0, 0}, /* CMD45 */
101 {0, 0}, /* CMD46 */
102 {0, 0}, /* CMD47 */
103 {0, 0}, /* CMD48 */
104 {0, 0}, /* CMD49 */
105 {0, 0}, /* CMD50 */
106 {0, 0}, /* CMD51 */
107 {0, 0}, /* CMD52 */
108 {0, 0}, /* CMD53 */
109 {0, 0}, /* CMD54 */
110 {0, 1}, /* CMD55 */
111 {0xff, 0xff}, /* CMD56 */
112 {0, 0}, /* CMD57 */
113 {0, 0}, /* CMD58 */
114 {0, 0}, /* CMD59 */
115 {0, 0}, /* CMD60 */
116 {0, 0}, /* CMD61 */
117 {0, 0}, /* CMD62 */
118 {0, 0} /* CMD63 */
119};
120
121static struct cvm_mmc_cr_mods cvm_mmc_get_cr_mods(struct mmc_command *cmd)
122{
123 struct cvm_mmc_cr_type *cr;
124 u8 hardware_ctype, hardware_rtype;
125 u8 desired_ctype = 0, desired_rtype = 0;
126 struct cvm_mmc_cr_mods r;
127
128 cr = cvm_mmc_cr_types + (cmd->opcode & 0x3f);
129 hardware_ctype = cr->ctype;
130 hardware_rtype = cr->rtype;
131 if (cmd->opcode == MMC_GEN_CMD)
132 hardware_ctype = (cmd->arg & 1) ? 1 : 2;
133
134 switch (mmc_cmd_type(cmd)) {
135 case MMC_CMD_ADTC:
136 desired_ctype = (cmd->data->flags & MMC_DATA_WRITE) ? 2 : 1;
137 break;
138 case MMC_CMD_AC:
139 case MMC_CMD_BC:
140 case MMC_CMD_BCR:
141 desired_ctype = 0;
142 break;
143 }
144
145 switch (mmc_resp_type(cmd)) {
146 case MMC_RSP_NONE:
147 desired_rtype = 0;
148 break;
149 case MMC_RSP_R1:/* MMC_RSP_R5, MMC_RSP_R6, MMC_RSP_R7 */
150 case MMC_RSP_R1B:
151 desired_rtype = 1;
152 break;
153 case MMC_RSP_R2:
154 desired_rtype = 2;
155 break;
156 case MMC_RSP_R3: /* MMC_RSP_R4 */
157 desired_rtype = 3;
158 break;
159 }
160 r.ctype_xor = desired_ctype ^ hardware_ctype;
161 r.rtype_xor = desired_rtype ^ hardware_rtype;
162 return r;
163}
164
165static void check_switch_errors(struct cvm_mmc_host *host)
166{
167 u64 emm_switch;
168
169 emm_switch = readq(host->base + MIO_EMM_SWITCH(host));
170 if (emm_switch & MIO_EMM_SWITCH_ERR0)
171 dev_err(host->dev, "Switch power class error\n");
172 if (emm_switch & MIO_EMM_SWITCH_ERR1)
173 dev_err(host->dev, "Switch hs timing error\n");
174 if (emm_switch & MIO_EMM_SWITCH_ERR2)
175 dev_err(host->dev, "Switch bus width error\n");
176}
177
178static void clear_bus_id(u64 *reg)
179{
180 u64 bus_id_mask = GENMASK_ULL(61, 60);
181
182 *reg &= ~bus_id_mask;
183}
184
185static void set_bus_id(u64 *reg, int bus_id)
186{
187 clear_bus_id(reg);
188 *reg |= FIELD_PREP(GENMASK(61, 60), bus_id);
189}
190
191static int get_bus_id(u64 reg)
192{
193 return FIELD_GET(GENMASK_ULL(61, 60), reg);
194}
195
196/*
197 * We never set the switch_exe bit since that would interfere
198 * with the commands send by the MMC core.
199 */
200static void do_switch(struct cvm_mmc_host *host, u64 emm_switch)
201{
202 int retries = 100;
203 u64 rsp_sts;
204 int bus_id;
205
206 /*
207 * Modes setting only taken from slot 0. Work around that hardware
208 * issue by first switching to slot 0.
209 */
210 bus_id = get_bus_id(emm_switch);
211 clear_bus_id(&emm_switch);
212 writeq(emm_switch, host->base + MIO_EMM_SWITCH(host));
213
214 set_bus_id(&emm_switch, bus_id);
215 writeq(emm_switch, host->base + MIO_EMM_SWITCH(host));
216
217 /* wait for the switch to finish */
218 do {
219 rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host));
220 if (!(rsp_sts & MIO_EMM_RSP_STS_SWITCH_VAL))
221 break;
222 udelay(10);
223 } while (--retries);
224
225 check_switch_errors(host);
226}
227
228static bool switch_val_changed(struct cvm_mmc_slot *slot, u64 new_val)
229{
230 /* Match BUS_ID, HS_TIMING, BUS_WIDTH, POWER_CLASS, CLK_HI, CLK_LO */
231 u64 match = 0x3001070fffffffffull;
232
233 return (slot->cached_switch & match) != (new_val & match);
234}
235
236static void set_wdog(struct cvm_mmc_slot *slot, unsigned int ns)
237{
238 u64 timeout;
239
240 if (!slot->clock)
241 return;
242
243 if (ns)
244 timeout = (slot->clock * ns) / NSEC_PER_SEC;
245 else
246 timeout = (slot->clock * 850ull) / 1000ull;
247 writeq(timeout, slot->host->base + MIO_EMM_WDOG(slot->host));
248}
249
250static void cvm_mmc_reset_bus(struct cvm_mmc_slot *slot)
251{
252 struct cvm_mmc_host *host = slot->host;
253 u64 emm_switch, wdog;
254
255 emm_switch = readq(slot->host->base + MIO_EMM_SWITCH(host));
256 emm_switch &= ~(MIO_EMM_SWITCH_EXE | MIO_EMM_SWITCH_ERR0 |
257 MIO_EMM_SWITCH_ERR1 | MIO_EMM_SWITCH_ERR2);
258 set_bus_id(&emm_switch, slot->bus_id);
259
260 wdog = readq(slot->host->base + MIO_EMM_WDOG(host));
261 do_switch(slot->host, emm_switch);
262
263 slot->cached_switch = emm_switch;
264
265 msleep(20);
266
267 writeq(wdog, slot->host->base + MIO_EMM_WDOG(host));
268}
269
270/* Switch to another slot if needed */
271static void cvm_mmc_switch_to(struct cvm_mmc_slot *slot)
272{
273 struct cvm_mmc_host *host = slot->host;
274 struct cvm_mmc_slot *old_slot;
275 u64 emm_sample, emm_switch;
276
277 if (slot->bus_id == host->last_slot)
278 return;
279
280 if (host->last_slot >= 0 && host->slot[host->last_slot]) {
281 old_slot = host->slot[host->last_slot];
282 old_slot->cached_switch = readq(host->base + MIO_EMM_SWITCH(host));
283 old_slot->cached_rca = readq(host->base + MIO_EMM_RCA(host));
284 }
285
286 writeq(slot->cached_rca, host->base + MIO_EMM_RCA(host));
287 emm_switch = slot->cached_switch;
288 set_bus_id(&emm_switch, slot->bus_id);
289 do_switch(host, emm_switch);
290
291 emm_sample = FIELD_PREP(MIO_EMM_SAMPLE_CMD_CNT, slot->cmd_cnt) |
292 FIELD_PREP(MIO_EMM_SAMPLE_DAT_CNT, slot->dat_cnt);
293 writeq(emm_sample, host->base + MIO_EMM_SAMPLE(host));
294
295 host->last_slot = slot->bus_id;
296}
297
298static void do_read(struct cvm_mmc_host *host, struct mmc_request *req,
299 u64 dbuf)
300{
301 struct sg_mapping_iter *smi = &host->smi;
302 int data_len = req->data->blocks * req->data->blksz;
303 int bytes_xfered, shift = -1;
304 u64 dat = 0;
305
306 /* Auto inc from offset zero */
307 writeq((0x10000 | (dbuf << 6)), host->base + MIO_EMM_BUF_IDX(host));
308
309 for (bytes_xfered = 0; bytes_xfered < data_len;) {
310 if (smi->consumed >= smi->length) {
311 if (!sg_miter_next(smi))
312 break;
313 smi->consumed = 0;
314 }
315
316 if (shift < 0) {
317 dat = readq(host->base + MIO_EMM_BUF_DAT(host));
318 shift = 56;
319 }
320
321 while (smi->consumed < smi->length && shift >= 0) {
322 ((u8 *)smi->addr)[smi->consumed] = (dat >> shift) & 0xff;
323 bytes_xfered++;
324 smi->consumed++;
325 shift -= 8;
326 }
327 }
328
329 sg_miter_stop(smi);
330 req->data->bytes_xfered = bytes_xfered;
331 req->data->error = 0;
332}
333
334static void do_write(struct mmc_request *req)
335{
336 req->data->bytes_xfered = req->data->blocks * req->data->blksz;
337 req->data->error = 0;
338}
339
340static void set_cmd_response(struct cvm_mmc_host *host, struct mmc_request *req,
341 u64 rsp_sts)
342{
343 u64 rsp_hi, rsp_lo;
344
345 if (!(rsp_sts & MIO_EMM_RSP_STS_RSP_VAL))
346 return;
347
348 rsp_lo = readq(host->base + MIO_EMM_RSP_LO(host));
349
350 switch (FIELD_GET(MIO_EMM_RSP_STS_RSP_TYPE, rsp_sts)) {
351 case 1:
352 case 3:
353 req->cmd->resp[0] = (rsp_lo >> 8) & 0xffffffff;
354 req->cmd->resp[1] = 0;
355 req->cmd->resp[2] = 0;
356 req->cmd->resp[3] = 0;
357 break;
358 case 2:
359 req->cmd->resp[3] = rsp_lo & 0xffffffff;
360 req->cmd->resp[2] = (rsp_lo >> 32) & 0xffffffff;
361 rsp_hi = readq(host->base + MIO_EMM_RSP_HI(host));
362 req->cmd->resp[1] = rsp_hi & 0xffffffff;
363 req->cmd->resp[0] = (rsp_hi >> 32) & 0xffffffff;
364 break;
365 }
366}
367
368static int get_dma_dir(struct mmc_data *data)
369{
370 return (data->flags & MMC_DATA_WRITE) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
371}
372
373static int finish_dma_single(struct cvm_mmc_host *host, struct mmc_data *data)
374{
375 data->bytes_xfered = data->blocks * data->blksz;
376 data->error = 0;
377 dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data));
378 return 1;
379}
380
381static int finish_dma_sg(struct cvm_mmc_host *host, struct mmc_data *data)
382{
383 u64 fifo_cfg;
384 int count;
385
386 /* Check if there are any pending requests left */
387 fifo_cfg = readq(host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
388 count = FIELD_GET(MIO_EMM_DMA_FIFO_CFG_COUNT, fifo_cfg);
389 if (count)
390 dev_err(host->dev, "%u requests still pending\n", count);
391
392 data->bytes_xfered = data->blocks * data->blksz;
393 data->error = 0;
394
395 /* Clear and disable FIFO */
396 writeq(BIT_ULL(16), host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
397 dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data));
398 return 1;
399}
400
401static int finish_dma(struct cvm_mmc_host *host, struct mmc_data *data)
402{
403 if (host->use_sg && data->sg_len > 1)
404 return finish_dma_sg(host, data);
405 else
406 return finish_dma_single(host, data);
407}
408
409static int check_status(u64 rsp_sts)
410{
411 if (rsp_sts & MIO_EMM_RSP_STS_RSP_BAD_STS ||
412 rsp_sts & MIO_EMM_RSP_STS_RSP_CRC_ERR ||
413 rsp_sts & MIO_EMM_RSP_STS_BLK_CRC_ERR)
414 return -EILSEQ;
415 if (rsp_sts & MIO_EMM_RSP_STS_RSP_TIMEOUT ||
416 rsp_sts & MIO_EMM_RSP_STS_BLK_TIMEOUT)
417 return -ETIMEDOUT;
418 if (rsp_sts & MIO_EMM_RSP_STS_DBUF_ERR)
419 return -EIO;
420 return 0;
421}
422
423/* Try to clean up failed DMA. */
424static void cleanup_dma(struct cvm_mmc_host *host, u64 rsp_sts)
425{
426 u64 emm_dma;
427
428 emm_dma = readq(host->base + MIO_EMM_DMA(host));
429 emm_dma |= FIELD_PREP(MIO_EMM_DMA_VAL, 1) |
430 FIELD_PREP(MIO_EMM_DMA_DAT_NULL, 1);
431 set_bus_id(&emm_dma, get_bus_id(rsp_sts));
432 writeq(emm_dma, host->base + MIO_EMM_DMA(host));
433}
434
435irqreturn_t cvm_mmc_interrupt(int irq, void *dev_id)
436{
437 struct cvm_mmc_host *host = dev_id;
438 struct mmc_request *req;
439 u64 emm_int, rsp_sts;
440 bool host_done;
441
442 if (host->need_irq_handler_lock)
443 spin_lock(&host->irq_handler_lock);
444 else
445 __acquire(&host->irq_handler_lock);
446
447 /* Clear interrupt bits (write 1 clears ). */
448 emm_int = readq(host->base + MIO_EMM_INT(host));
449 writeq(emm_int, host->base + MIO_EMM_INT(host));
450
451 if (emm_int & MIO_EMM_INT_SWITCH_ERR)
452 check_switch_errors(host);
453
454 req = host->current_req;
455 if (!req)
456 goto out;
457
458 rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host));
459 /*
460 * dma_val set means DMA is still in progress. Don't touch
461 * the request and wait for the interrupt indicating that
462 * the DMA is finished.
463 */
464 if ((rsp_sts & MIO_EMM_RSP_STS_DMA_VAL) && host->dma_active)
465 goto out;
466
467 if (!host->dma_active && req->data &&
468 (emm_int & MIO_EMM_INT_BUF_DONE)) {
469 unsigned int type = (rsp_sts >> 7) & 3;
470
471 if (type == 1)
472 do_read(host, req, rsp_sts & MIO_EMM_RSP_STS_DBUF);
473 else if (type == 2)
474 do_write(req);
475 }
476
477 host_done = emm_int & MIO_EMM_INT_CMD_DONE ||
478 emm_int & MIO_EMM_INT_DMA_DONE ||
479 emm_int & MIO_EMM_INT_CMD_ERR ||
480 emm_int & MIO_EMM_INT_DMA_ERR;
481
482 if (!(host_done && req->done))
483 goto no_req_done;
484
485 req->cmd->error = check_status(rsp_sts);
486
487 if (host->dma_active && req->data)
488 if (!finish_dma(host, req->data))
489 goto no_req_done;
490
491 set_cmd_response(host, req, rsp_sts);
492 if ((emm_int & MIO_EMM_INT_DMA_ERR) &&
493 (rsp_sts & MIO_EMM_RSP_STS_DMA_PEND))
494 cleanup_dma(host, rsp_sts);
495
496 host->current_req = NULL;
497 req->done(req);
498
499no_req_done:
500 if (host->dmar_fixup_done)
501 host->dmar_fixup_done(host);
502 if (host_done)
503 host->release_bus(host);
504out:
505 if (host->need_irq_handler_lock)
506 spin_unlock(&host->irq_handler_lock);
507 else
508 __release(&host->irq_handler_lock);
509 return IRQ_RETVAL(emm_int != 0);
510}
511
512/*
513 * Program DMA_CFG and if needed DMA_ADR.
514 * Returns 0 on error, DMA address otherwise.
515 */
516static u64 prepare_dma_single(struct cvm_mmc_host *host, struct mmc_data *data)
517{
518 u64 dma_cfg, addr;
519 int count, rw;
520
521 count = dma_map_sg(host->dev, data->sg, data->sg_len,
522 get_dma_dir(data));
523 if (!count)
524 return 0;
525
526 rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
527 dma_cfg = FIELD_PREP(MIO_EMM_DMA_CFG_EN, 1) |
528 FIELD_PREP(MIO_EMM_DMA_CFG_RW, rw);
529#ifdef __LITTLE_ENDIAN
530 dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_ENDIAN, 1);
531#endif
532 dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_SIZE,
533 (sg_dma_len(&data->sg[0]) / 8) - 1);
534
535 addr = sg_dma_address(&data->sg[0]);
536 if (!host->big_dma_addr)
537 dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_ADR, addr);
538 writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host));
539
540 pr_debug("[%s] sg_dma_len: %u total sg_elem: %d\n",
541 (rw) ? "W" : "R", sg_dma_len(&data->sg[0]), count);
542
543 if (host->big_dma_addr)
544 writeq(addr, host->dma_base + MIO_EMM_DMA_ADR(host));
545 return addr;
546}
547
548/*
549 * Queue complete sg list into the FIFO.
550 * Returns 0 on error, 1 otherwise.
551 */
552static u64 prepare_dma_sg(struct cvm_mmc_host *host, struct mmc_data *data)
553{
554 struct scatterlist *sg;
555 u64 fifo_cmd, addr;
556 int count, i, rw;
557
558 count = dma_map_sg(host->dev, data->sg, data->sg_len,
559 get_dma_dir(data));
560 if (!count)
561 return 0;
562 if (count > 16)
563 goto error;
564
565 /* Enable FIFO by removing CLR bit */
566 writeq(0, host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
567
568 for_each_sg(data->sg, sg, count, i) {
569 /* Program DMA address */
570 addr = sg_dma_address(sg);
571 if (addr & 7)
572 goto error;
573 writeq(addr, host->dma_base + MIO_EMM_DMA_FIFO_ADR(host));
574
575 /*
576 * If we have scatter-gather support we also have an extra
577 * register for the DMA addr, so no need to check
578 * host->big_dma_addr here.
579 */
580 rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
581 fifo_cmd = FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_RW, rw);
582
583 /* enable interrupts on the last element */
584 fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_INTDIS,
585 (i + 1 == count) ? 0 : 1);
586
587#ifdef __LITTLE_ENDIAN
588 fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_ENDIAN, 1);
589#endif
590 fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_SIZE,
591 sg_dma_len(sg) / 8 - 1);
592 /*
593 * The write copies the address and the command to the FIFO
594 * and increments the FIFO's COUNT field.
595 */
596 writeq(fifo_cmd, host->dma_base + MIO_EMM_DMA_FIFO_CMD(host));
597 pr_debug("[%s] sg_dma_len: %u sg_elem: %d/%d\n",
598 (rw) ? "W" : "R", sg_dma_len(sg), i, count);
599 }
600
601 /*
602 * In difference to prepare_dma_single we don't return the
603 * address here, as it would not make sense for scatter-gather.
604 * The dma fixup is only required on models that don't support
605 * scatter-gather, so that is not a problem.
606 */
607 return 1;
608
609error:
610 WARN_ON_ONCE(1);
611 dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data));
612 /* Disable FIFO */
613 writeq(BIT_ULL(16), host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
614 return 0;
615}
616
617static u64 prepare_dma(struct cvm_mmc_host *host, struct mmc_data *data)
618{
619 if (host->use_sg && data->sg_len > 1)
620 return prepare_dma_sg(host, data);
621 else
622 return prepare_dma_single(host, data);
623}
624
625static u64 prepare_ext_dma(struct mmc_host *mmc, struct mmc_request *mrq)
626{
627 struct cvm_mmc_slot *slot = mmc_priv(mmc);
628 u64 emm_dma;
629
630 emm_dma = FIELD_PREP(MIO_EMM_DMA_VAL, 1) |
631 FIELD_PREP(MIO_EMM_DMA_SECTOR,
632 mmc_card_is_blockaddr(mmc->card) ? 1 : 0) |
633 FIELD_PREP(MIO_EMM_DMA_RW,
634 (mrq->data->flags & MMC_DATA_WRITE) ? 1 : 0) |
635 FIELD_PREP(MIO_EMM_DMA_BLOCK_CNT, mrq->data->blocks) |
636 FIELD_PREP(MIO_EMM_DMA_CARD_ADDR, mrq->cmd->arg);
637 set_bus_id(&emm_dma, slot->bus_id);
638
639 if (mmc_card_mmc(mmc->card) || (mmc_card_sd(mmc->card) &&
640 (mmc->card->scr.cmds & SD_SCR_CMD23_SUPPORT)))
641 emm_dma |= FIELD_PREP(MIO_EMM_DMA_MULTI, 1);
642
643 pr_debug("[%s] blocks: %u multi: %d\n",
644 (emm_dma & MIO_EMM_DMA_RW) ? "W" : "R",
645 mrq->data->blocks, (emm_dma & MIO_EMM_DMA_MULTI) ? 1 : 0);
646 return emm_dma;
647}
648
649static void cvm_mmc_dma_request(struct mmc_host *mmc,
650 struct mmc_request *mrq)
651{
652 struct cvm_mmc_slot *slot = mmc_priv(mmc);
653 struct cvm_mmc_host *host = slot->host;
654 struct mmc_data *data;
655 u64 emm_dma, addr;
656
657 if (!mrq->data || !mrq->data->sg || !mrq->data->sg_len ||
658 !mrq->stop || mrq->stop->opcode != MMC_STOP_TRANSMISSION) {
659 dev_err(&mmc->card->dev, "Error: %s no data\n", __func__);
660 goto error;
661 }
662
663 cvm_mmc_switch_to(slot);
664
665 data = mrq->data;
666 pr_debug("DMA request blocks: %d block_size: %d total_size: %d\n",
667 data->blocks, data->blksz, data->blocks * data->blksz);
668 if (data->timeout_ns)
669 set_wdog(slot, data->timeout_ns);
670
671 WARN_ON(host->current_req);
672 host->current_req = mrq;
673
674 emm_dma = prepare_ext_dma(mmc, mrq);
675 addr = prepare_dma(host, data);
676 if (!addr) {
677 dev_err(host->dev, "prepare_dma failed\n");
678 goto error;
679 }
680
681 host->dma_active = true;
682 host->int_enable(host, MIO_EMM_INT_CMD_ERR | MIO_EMM_INT_DMA_DONE |
683 MIO_EMM_INT_DMA_ERR);
684
685 if (host->dmar_fixup)
686 host->dmar_fixup(host, mrq->cmd, data, addr);
687
688 /*
689 * If we have a valid SD card in the slot, we set the response
690 * bit mask to check for CRC errors and timeouts only.
691 * Otherwise, use the default power reset value.
692 */
693 if (mmc_card_sd(mmc->card))
694 writeq(0x00b00000ull, host->base + MIO_EMM_STS_MASK(host));
695 else
696 writeq(0xe4390080ull, host->base + MIO_EMM_STS_MASK(host));
697 writeq(emm_dma, host->base + MIO_EMM_DMA(host));
698 return;
699
700error:
701 mrq->cmd->error = -EINVAL;
702 if (mrq->done)
703 mrq->done(mrq);
704 host->release_bus(host);
705}
706
707static void do_read_request(struct cvm_mmc_host *host, struct mmc_request *mrq)
708{
709 sg_miter_start(&host->smi, mrq->data->sg, mrq->data->sg_len,
710 SG_MITER_ATOMIC | SG_MITER_TO_SG);
711}
712
713static void do_write_request(struct cvm_mmc_host *host, struct mmc_request *mrq)
714{
715 unsigned int data_len = mrq->data->blocks * mrq->data->blksz;
716 struct sg_mapping_iter *smi = &host->smi;
717 unsigned int bytes_xfered;
718 int shift = 56;
719 u64 dat = 0;
720
721 /* Copy data to the xmit buffer before issuing the command. */
722 sg_miter_start(smi, mrq->data->sg, mrq->data->sg_len, SG_MITER_FROM_SG);
723
724 /* Auto inc from offset zero, dbuf zero */
725 writeq(0x10000ull, host->base + MIO_EMM_BUF_IDX(host));
726
727 for (bytes_xfered = 0; bytes_xfered < data_len;) {
728 if (smi->consumed >= smi->length) {
729 if (!sg_miter_next(smi))
730 break;
731 smi->consumed = 0;
732 }
733
734 while (smi->consumed < smi->length && shift >= 0) {
735 dat |= (u64)((u8 *)smi->addr)[smi->consumed] << shift;
736 bytes_xfered++;
737 smi->consumed++;
738 shift -= 8;
739 }
740
741 if (shift < 0) {
742 writeq(dat, host->base + MIO_EMM_BUF_DAT(host));
743 shift = 56;
744 dat = 0;
745 }
746 }
747 sg_miter_stop(smi);
748}
749
750static void cvm_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
751{
752 struct cvm_mmc_slot *slot = mmc_priv(mmc);
753 struct cvm_mmc_host *host = slot->host;
754 struct mmc_command *cmd = mrq->cmd;
755 struct cvm_mmc_cr_mods mods;
756 u64 emm_cmd, rsp_sts;
757 int retries = 100;
758
759 /*
760 * Note about locking:
761 * All MMC devices share the same bus and controller. Allow only a
762 * single user of the bootbus/MMC bus at a time. The lock is acquired
763 * on all entry points from the MMC layer.
764 *
765 * For requests the lock is only released after the completion
766 * interrupt!
767 */
768 host->acquire_bus(host);
769
770 if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
771 cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK)
772 return cvm_mmc_dma_request(mmc, mrq);
773
774 cvm_mmc_switch_to(slot);
775
776 mods = cvm_mmc_get_cr_mods(cmd);
777
778 WARN_ON(host->current_req);
779 host->current_req = mrq;
780
781 if (cmd->data) {
782 if (cmd->data->flags & MMC_DATA_READ)
783 do_read_request(host, mrq);
784 else
785 do_write_request(host, mrq);
786
787 if (cmd->data->timeout_ns)
788 set_wdog(slot, cmd->data->timeout_ns);
789 } else
790 set_wdog(slot, 0);
791
792 host->dma_active = false;
793 host->int_enable(host, MIO_EMM_INT_CMD_DONE | MIO_EMM_INT_CMD_ERR);
794
795 emm_cmd = FIELD_PREP(MIO_EMM_CMD_VAL, 1) |
796 FIELD_PREP(MIO_EMM_CMD_CTYPE_XOR, mods.ctype_xor) |
797 FIELD_PREP(MIO_EMM_CMD_RTYPE_XOR, mods.rtype_xor) |
798 FIELD_PREP(MIO_EMM_CMD_IDX, cmd->opcode) |
799 FIELD_PREP(MIO_EMM_CMD_ARG, cmd->arg);
800 set_bus_id(&emm_cmd, slot->bus_id);
801 if (cmd->data && mmc_cmd_type(cmd) == MMC_CMD_ADTC)
802 emm_cmd |= FIELD_PREP(MIO_EMM_CMD_OFFSET,
803 64 - ((cmd->data->blocks * cmd->data->blksz) / 8));
804
805 writeq(0, host->base + MIO_EMM_STS_MASK(host));
806
807retry:
808 rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host));
809 if (rsp_sts & MIO_EMM_RSP_STS_DMA_VAL ||
810 rsp_sts & MIO_EMM_RSP_STS_CMD_VAL ||
811 rsp_sts & MIO_EMM_RSP_STS_SWITCH_VAL ||
812 rsp_sts & MIO_EMM_RSP_STS_DMA_PEND) {
813 udelay(10);
814 if (--retries)
815 goto retry;
816 }
817 if (!retries)
818 dev_err(host->dev, "Bad status: %llx before command write\n", rsp_sts);
819 writeq(emm_cmd, host->base + MIO_EMM_CMD(host));
820}
821
822static void cvm_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
823{
824 struct cvm_mmc_slot *slot = mmc_priv(mmc);
825 struct cvm_mmc_host *host = slot->host;
826 int clk_period = 0, power_class = 10, bus_width = 0;
827 u64 clock, emm_switch;
828
829 host->acquire_bus(host);
830 cvm_mmc_switch_to(slot);
831
832 /* Set the power state */
833 switch (ios->power_mode) {
834 case MMC_POWER_ON:
835 break;
836
837 case MMC_POWER_OFF:
838 cvm_mmc_reset_bus(slot);
839 if (host->global_pwr_gpiod)
840 host->set_shared_power(host, 0);
841 else if (!IS_ERR(mmc->supply.vmmc))
842 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
843 break;
844
845 case MMC_POWER_UP:
846 if (host->global_pwr_gpiod)
847 host->set_shared_power(host, 1);
848 else if (!IS_ERR(mmc->supply.vmmc))
849 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
850 break;
851 }
852
853 /* Convert bus width to HW definition */
854 switch (ios->bus_width) {
855 case MMC_BUS_WIDTH_8:
856 bus_width = 2;
857 break;
858 case MMC_BUS_WIDTH_4:
859 bus_width = 1;
860 break;
861 case MMC_BUS_WIDTH_1:
862 bus_width = 0;
863 break;
864 }
865
866 /* DDR is available for 4/8 bit bus width */
867 if (ios->bus_width && ios->timing == MMC_TIMING_MMC_DDR52)
868 bus_width |= 4;
869
870 /* Change the clock frequency. */
871 clock = ios->clock;
872 if (clock > 52000000)
873 clock = 52000000;
874 slot->clock = clock;
875
876 if (clock)
877 clk_period = (host->sys_freq + clock - 1) / (2 * clock);
878
879 emm_switch = FIELD_PREP(MIO_EMM_SWITCH_HS_TIMING,
880 (ios->timing == MMC_TIMING_MMC_HS)) |
881 FIELD_PREP(MIO_EMM_SWITCH_BUS_WIDTH, bus_width) |
882 FIELD_PREP(MIO_EMM_SWITCH_POWER_CLASS, power_class) |
883 FIELD_PREP(MIO_EMM_SWITCH_CLK_HI, clk_period) |
884 FIELD_PREP(MIO_EMM_SWITCH_CLK_LO, clk_period);
885 set_bus_id(&emm_switch, slot->bus_id);
886
887 if (!switch_val_changed(slot, emm_switch))
888 goto out;
889
890 set_wdog(slot, 0);
891 do_switch(host, emm_switch);
892 slot->cached_switch = emm_switch;
893out:
894 host->release_bus(host);
895}
896
897static const struct mmc_host_ops cvm_mmc_ops = {
898 .request = cvm_mmc_request,
899 .set_ios = cvm_mmc_set_ios,
900 .get_ro = mmc_gpio_get_ro,
901 .get_cd = mmc_gpio_get_cd,
902};
903
904static void cvm_mmc_set_clock(struct cvm_mmc_slot *slot, unsigned int clock)
905{
906 struct mmc_host *mmc = slot->mmc;
907
908 clock = min(clock, mmc->f_max);
909 clock = max(clock, mmc->f_min);
910 slot->clock = clock;
911}
912
913static int cvm_mmc_init_lowlevel(struct cvm_mmc_slot *slot)
914{
915 struct cvm_mmc_host *host = slot->host;
916 u64 emm_switch;
917
918 /* Enable this bus slot. */
919 host->emm_cfg |= (1ull << slot->bus_id);
920 writeq(host->emm_cfg, slot->host->base + MIO_EMM_CFG(host));
921 udelay(10);
922
923 /* Program initial clock speed and power. */
924 cvm_mmc_set_clock(slot, slot->mmc->f_min);
925 emm_switch = FIELD_PREP(MIO_EMM_SWITCH_POWER_CLASS, 10);
926 emm_switch |= FIELD_PREP(MIO_EMM_SWITCH_CLK_HI,
927 (host->sys_freq / slot->clock) / 2);
928 emm_switch |= FIELD_PREP(MIO_EMM_SWITCH_CLK_LO,
929 (host->sys_freq / slot->clock) / 2);
930
931 /* Make the changes take effect on this bus slot. */
932 set_bus_id(&emm_switch, slot->bus_id);
933 do_switch(host, emm_switch);
934
935 slot->cached_switch = emm_switch;
936
937 /*
938 * Set watchdog timeout value and default reset value
939 * for the mask register. Finally, set the CARD_RCA
940 * bit so that we can get the card address relative
941 * to the CMD register for CMD7 transactions.
942 */
943 set_wdog(slot, 0);
944 writeq(0xe4390080ull, host->base + MIO_EMM_STS_MASK(host));
945 writeq(1, host->base + MIO_EMM_RCA(host));
946 return 0;
947}
948
949static int cvm_mmc_of_parse(struct device *dev, struct cvm_mmc_slot *slot)
950{
951 u32 id, cmd_skew = 0, dat_skew = 0, bus_width = 0;
952 struct device_node *node = dev->of_node;
953 struct mmc_host *mmc = slot->mmc;
954 u64 clock_period;
955 int ret;
956
957 ret = of_property_read_u32(node, "reg", &id);
958 if (ret) {
959 dev_err(dev, "Missing or invalid reg property on %pOF\n", node);
960 return ret;
961 }
962
963 if (id >= CAVIUM_MAX_MMC || slot->host->slot[id]) {
964 dev_err(dev, "Invalid reg property on %pOF\n", node);
965 return -EINVAL;
966 }
967
968 ret = mmc_regulator_get_supply(mmc);
969 if (ret)
970 return ret;
971 /*
972 * Legacy Octeon firmware has no regulator entry, fall-back to
973 * a hard-coded voltage to get a sane OCR.
974 */
975 if (IS_ERR(mmc->supply.vmmc))
976 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
977
978 /* Common MMC bindings */
979 ret = mmc_of_parse(mmc);
980 if (ret)
981 return ret;
982
983 /* Set bus width */
984 if (!(mmc->caps & (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA))) {
985 of_property_read_u32(node, "cavium,bus-max-width", &bus_width);
986 if (bus_width == 8)
987 mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
988 else if (bus_width == 4)
989 mmc->caps |= MMC_CAP_4_BIT_DATA;
990 }
991
992 /* Set maximum and minimum frequency */
993 if (!mmc->f_max)
994 of_property_read_u32(node, "spi-max-frequency", &mmc->f_max);
995 if (!mmc->f_max || mmc->f_max > 52000000)
996 mmc->f_max = 52000000;
997 mmc->f_min = 400000;
998
999 /* Sampling register settings, period in picoseconds */
1000 clock_period = 1000000000000ull / slot->host->sys_freq;
1001 of_property_read_u32(node, "cavium,cmd-clk-skew", &cmd_skew);
1002 of_property_read_u32(node, "cavium,dat-clk-skew", &dat_skew);
1003 slot->cmd_cnt = (cmd_skew + clock_period / 2) / clock_period;
1004 slot->dat_cnt = (dat_skew + clock_period / 2) / clock_period;
1005
1006 return id;
1007}
1008
1009int cvm_mmc_of_slot_probe(struct device *dev, struct cvm_mmc_host *host)
1010{
1011 struct cvm_mmc_slot *slot;
1012 struct mmc_host *mmc;
1013 int ret, id;
1014
1015 mmc = mmc_alloc_host(sizeof(struct cvm_mmc_slot), dev);
1016 if (!mmc)
1017 return -ENOMEM;
1018
1019 slot = mmc_priv(mmc);
1020 slot->mmc = mmc;
1021 slot->host = host;
1022
1023 ret = cvm_mmc_of_parse(dev, slot);
1024 if (ret < 0)
1025 goto error;
1026 id = ret;
1027
1028 /* Set up host parameters */
1029 mmc->ops = &cvm_mmc_ops;
1030
1031 /*
1032 * We only have a 3.3v supply, we cannot support any
1033 * of the UHS modes. We do support the high speed DDR
1034 * modes up to 52MHz.
1035 *
1036 * Disable bounce buffers for max_segs = 1
1037 */
1038 mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
1039 MMC_CAP_CMD23 | MMC_CAP_POWER_OFF_CARD | MMC_CAP_3_3V_DDR;
1040
1041 if (host->use_sg)
1042 mmc->max_segs = 16;
1043 else
1044 mmc->max_segs = 1;
1045
1046 /* DMA size field can address up to 8 MB */
1047 mmc->max_seg_size = min_t(unsigned int, 8 * 1024 * 1024,
1048 dma_get_max_seg_size(host->dev));
1049 mmc->max_req_size = mmc->max_seg_size;
1050 /* External DMA is in 512 byte blocks */
1051 mmc->max_blk_size = 512;
1052 /* DMA block count field is 15 bits */
1053 mmc->max_blk_count = 32767;
1054
1055 slot->clock = mmc->f_min;
1056 slot->bus_id = id;
1057 slot->cached_rca = 1;
1058
1059 host->acquire_bus(host);
1060 host->slot[id] = slot;
1061 cvm_mmc_switch_to(slot);
1062 cvm_mmc_init_lowlevel(slot);
1063 host->release_bus(host);
1064
1065 ret = mmc_add_host(mmc);
1066 if (ret) {
1067 dev_err(dev, "mmc_add_host() returned %d\n", ret);
1068 slot->host->slot[id] = NULL;
1069 goto error;
1070 }
1071 return 0;
1072
1073error:
1074 mmc_free_host(slot->mmc);
1075 return ret;
1076}
1077
1078int cvm_mmc_of_slot_remove(struct cvm_mmc_slot *slot)
1079{
1080 mmc_remove_host(slot->mmc);
1081 slot->host->slot[slot->bus_id] = NULL;
1082 mmc_free_host(slot->mmc);
1083 return 0;
1084}