Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
4 *
5 * Copyright (C) 2004 Patrick Mochel
6 * 2005 Rudolf Marek <r.marek@assembler.cz>
7 *
8 * The 1563 southbridge is deceptively similar to the 1533, with a
9 * few notable exceptions. One of those happens to be the fact they
10 * upgraded the i2c core to be 2.0 compliant, and happens to be almost
11 * identical to the i2c controller found in the Intel 801 south
12 * bridges.
13 *
14 * This driver is based on a mix of the 15x3, 1535, and i801 drivers,
15 * with a little help from the ALi 1563 spec.
16 */
17
18#include <linux/module.h>
19#include <linux/delay.h>
20#include <linux/i2c.h>
21#include <linux/pci.h>
22#include <linux/acpi.h>
23
24#define ALI1563_MAX_TIMEOUT 500
25#define ALI1563_SMBBA 0x80
26#define ALI1563_SMB_IOEN 1
27#define ALI1563_SMB_HOSTEN 2
28#define ALI1563_SMB_IOSIZE 16
29
30#define SMB_HST_STS (ali1563_smba + 0)
31#define SMB_HST_CNTL1 (ali1563_smba + 1)
32#define SMB_HST_CNTL2 (ali1563_smba + 2)
33#define SMB_HST_CMD (ali1563_smba + 3)
34#define SMB_HST_ADD (ali1563_smba + 4)
35#define SMB_HST_DAT0 (ali1563_smba + 5)
36#define SMB_HST_DAT1 (ali1563_smba + 6)
37#define SMB_BLK_DAT (ali1563_smba + 7)
38
39#define HST_STS_BUSY 0x01
40#define HST_STS_INTR 0x02
41#define HST_STS_DEVERR 0x04
42#define HST_STS_BUSERR 0x08
43#define HST_STS_FAIL 0x10
44#define HST_STS_DONE 0x80
45#define HST_STS_BAD 0x1c
46
47
48#define HST_CNTL1_TIMEOUT 0x80
49#define HST_CNTL1_LAST 0x40
50
51#define HST_CNTL2_KILL 0x04
52#define HST_CNTL2_START 0x40
53#define HST_CNTL2_QUICK 0x00
54#define HST_CNTL2_BYTE 0x01
55#define HST_CNTL2_BYTE_DATA 0x02
56#define HST_CNTL2_WORD_DATA 0x03
57#define HST_CNTL2_BLOCK 0x05
58
59
60#define HST_CNTL2_SIZEMASK 0x38
61
62static struct pci_driver ali1563_pci_driver;
63static unsigned short ali1563_smba;
64
65static int ali1563_transaction(struct i2c_adapter *a, int size)
66{
67 u32 data;
68 int timeout;
69 int status = -EIO;
70
71 dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, "
72 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
73 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
74 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
75 inb_p(SMB_HST_DAT1));
76
77 data = inb_p(SMB_HST_STS);
78 if (data & HST_STS_BAD) {
79 dev_err(&a->dev, "ali1563: Trying to reset busy device\n");
80 outb_p(data | HST_STS_BAD, SMB_HST_STS);
81 data = inb_p(SMB_HST_STS);
82 if (data & HST_STS_BAD)
83 return -EBUSY;
84 }
85 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
86
87 timeout = ALI1563_MAX_TIMEOUT;
88 do {
89 msleep(1);
90 } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
91
92 dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
93 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
94 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
95 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
96 inb_p(SMB_HST_DAT1));
97
98 if (timeout && !(data & HST_STS_BAD))
99 return 0;
100
101 if (!timeout) {
102 /* Issue 'kill' to host controller */
103 outb_p(HST_CNTL2_KILL, SMB_HST_CNTL2);
104 data = inb_p(SMB_HST_STS);
105 status = -ETIMEDOUT;
106 }
107
108 /* device error - no response, ignore the autodetection case */
109 if (data & HST_STS_DEVERR) {
110 if (size != HST_CNTL2_QUICK)
111 dev_err(&a->dev, "Device error!\n");
112 status = -ENXIO;
113 }
114 /* bus collision */
115 if (data & HST_STS_BUSERR) {
116 dev_err(&a->dev, "Bus collision!\n");
117 /* Issue timeout, hoping it helps */
118 outb_p(HST_CNTL1_TIMEOUT, SMB_HST_CNTL1);
119 }
120
121 if (data & HST_STS_FAIL) {
122 dev_err(&a->dev, "Cleaning fail after KILL!\n");
123 outb_p(0x0, SMB_HST_CNTL2);
124 }
125
126 return status;
127}
128
129static int ali1563_block_start(struct i2c_adapter *a)
130{
131 u32 data;
132 int timeout;
133 int status = -EIO;
134
135 dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, "
136 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
137 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
138 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
139 inb_p(SMB_HST_DAT1));
140
141 data = inb_p(SMB_HST_STS);
142 if (data & HST_STS_BAD) {
143 dev_warn(&a->dev, "ali1563: Trying to reset busy device\n");
144 outb_p(data | HST_STS_BAD, SMB_HST_STS);
145 data = inb_p(SMB_HST_STS);
146 if (data & HST_STS_BAD)
147 return -EBUSY;
148 }
149
150 /* Clear byte-ready bit */
151 outb_p(data | HST_STS_DONE, SMB_HST_STS);
152
153 /* Start transaction and wait for byte-ready bit to be set */
154 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
155
156 timeout = ALI1563_MAX_TIMEOUT;
157 do {
158 msleep(1);
159 } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
160
161 dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
162 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
163 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
164 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
165 inb_p(SMB_HST_DAT1));
166
167 if (timeout && !(data & HST_STS_BAD))
168 return 0;
169
170 if (timeout == 0)
171 status = -ETIMEDOUT;
172
173 if (data & HST_STS_DEVERR)
174 status = -ENXIO;
175
176 dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
177 timeout ? "" : "Timeout ",
178 data & HST_STS_FAIL ? "Transaction Failed " : "",
179 data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
180 data & HST_STS_DEVERR ? "Device Error " : "",
181 !(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
182 return status;
183}
184
185static int ali1563_block(struct i2c_adapter *a,
186 union i2c_smbus_data *data, u8 rw)
187{
188 int i, len;
189 int error = 0;
190
191 /* Do we need this? */
192 outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1);
193
194 if (rw == I2C_SMBUS_WRITE) {
195 len = data->block[0];
196 if (len < 1)
197 len = 1;
198 else if (len > 32)
199 len = 32;
200 outb_p(len, SMB_HST_DAT0);
201 outb_p(data->block[1], SMB_BLK_DAT);
202 } else
203 len = 32;
204
205 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2);
206
207 for (i = 0; i < len; i++) {
208 if (rw == I2C_SMBUS_WRITE) {
209 outb_p(data->block[i + 1], SMB_BLK_DAT);
210 error = ali1563_block_start(a);
211 if (error)
212 break;
213 } else {
214 error = ali1563_block_start(a);
215 if (error)
216 break;
217 if (i == 0) {
218 len = inb_p(SMB_HST_DAT0);
219 if (len < 1)
220 len = 1;
221 else if (len > 32)
222 len = 32;
223 }
224 data->block[i+1] = inb_p(SMB_BLK_DAT);
225 }
226 }
227 /* Do we need this? */
228 outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1);
229 return error;
230}
231
232static s32 ali1563_access(struct i2c_adapter *a, u16 addr,
233 unsigned short flags, char rw, u8 cmd,
234 int size, union i2c_smbus_data *data)
235{
236 int error = 0;
237 int timeout;
238 u32 reg;
239
240 for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) {
241 reg = inb_p(SMB_HST_STS);
242 if (!(reg & HST_STS_BUSY))
243 break;
244 }
245 if (!timeout)
246 dev_warn(&a->dev, "SMBus not idle. HST_STS = %02x\n", reg);
247 outb_p(0xff, SMB_HST_STS);
248
249 /* Map the size to what the chip understands */
250 switch (size) {
251 case I2C_SMBUS_QUICK:
252 size = HST_CNTL2_QUICK;
253 break;
254 case I2C_SMBUS_BYTE:
255 size = HST_CNTL2_BYTE;
256 break;
257 case I2C_SMBUS_BYTE_DATA:
258 size = HST_CNTL2_BYTE_DATA;
259 break;
260 case I2C_SMBUS_WORD_DATA:
261 size = HST_CNTL2_WORD_DATA;
262 break;
263 case I2C_SMBUS_BLOCK_DATA:
264 size = HST_CNTL2_BLOCK;
265 break;
266 default:
267 dev_warn(&a->dev, "Unsupported transaction %d\n", size);
268 error = -EOPNOTSUPP;
269 goto Done;
270 }
271
272 outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
273 outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) |
274 (size << 3), SMB_HST_CNTL2);
275
276 /* Write the command register */
277
278 switch (size) {
279 case HST_CNTL2_BYTE:
280 if (rw == I2C_SMBUS_WRITE)
281 /* Beware it uses DAT0 register and not CMD! */
282 outb_p(cmd, SMB_HST_DAT0);
283 break;
284 case HST_CNTL2_BYTE_DATA:
285 outb_p(cmd, SMB_HST_CMD);
286 if (rw == I2C_SMBUS_WRITE)
287 outb_p(data->byte, SMB_HST_DAT0);
288 break;
289 case HST_CNTL2_WORD_DATA:
290 outb_p(cmd, SMB_HST_CMD);
291 if (rw == I2C_SMBUS_WRITE) {
292 outb_p(data->word & 0xff, SMB_HST_DAT0);
293 outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1);
294 }
295 break;
296 case HST_CNTL2_BLOCK:
297 outb_p(cmd, SMB_HST_CMD);
298 error = ali1563_block(a, data, rw);
299 goto Done;
300 }
301
302 error = ali1563_transaction(a, size);
303 if (error)
304 goto Done;
305
306 if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
307 goto Done;
308
309 switch (size) {
310 case HST_CNTL2_BYTE: /* Result put in SMBHSTDAT0 */
311 data->byte = inb_p(SMB_HST_DAT0);
312 break;
313 case HST_CNTL2_BYTE_DATA:
314 data->byte = inb_p(SMB_HST_DAT0);
315 break;
316 case HST_CNTL2_WORD_DATA:
317 data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8);
318 break;
319 }
320Done:
321 return error;
322}
323
324static u32 ali1563_func(struct i2c_adapter *a)
325{
326 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
327 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
328 I2C_FUNC_SMBUS_BLOCK_DATA;
329}
330
331
332static int ali1563_setup(struct pci_dev *dev)
333{
334 u16 ctrl;
335
336 pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
337
338 /* SMB I/O Base in high 12 bits and must be aligned with the
339 * size of the I/O space. */
340 ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1);
341 if (!ali1563_smba) {
342 dev_warn(&dev->dev, "ali1563_smba Uninitialized\n");
343 goto Err;
344 }
345
346 /* Check if device is enabled */
347 if (!(ctrl & ALI1563_SMB_HOSTEN)) {
348 dev_warn(&dev->dev, "Host Controller not enabled\n");
349 goto Err;
350 }
351 if (!(ctrl & ALI1563_SMB_IOEN)) {
352 dev_warn(&dev->dev, "I/O space not enabled, trying manually\n");
353 pci_write_config_word(dev, ALI1563_SMBBA,
354 ctrl | ALI1563_SMB_IOEN);
355 pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
356 if (!(ctrl & ALI1563_SMB_IOEN)) {
357 dev_err(&dev->dev,
358 "I/O space still not enabled, giving up\n");
359 goto Err;
360 }
361 }
362
363 if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE,
364 ali1563_pci_driver.name))
365 goto Err;
366
367 if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
368 ali1563_pci_driver.name)) {
369 dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n",
370 ali1563_smba);
371 goto Err;
372 }
373 dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba);
374
375 return 0;
376Err:
377 return -ENODEV;
378}
379
380static void ali1563_shutdown(struct pci_dev *dev)
381{
382 release_region(ali1563_smba, ALI1563_SMB_IOSIZE);
383}
384
385static const struct i2c_algorithm ali1563_algorithm = {
386 .smbus_xfer = ali1563_access,
387 .functionality = ali1563_func,
388};
389
390static struct i2c_adapter ali1563_adapter = {
391 .owner = THIS_MODULE,
392 .class = I2C_CLASS_HWMON,
393 .algo = &ali1563_algorithm,
394};
395
396static int ali1563_probe(struct pci_dev *dev,
397 const struct pci_device_id *id_table)
398{
399 int error;
400
401 error = ali1563_setup(dev);
402 if (error)
403 goto exit;
404 ali1563_adapter.dev.parent = &dev->dev;
405 snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name),
406 "SMBus ALi 1563 Adapter @ %04x", ali1563_smba);
407 error = i2c_add_adapter(&ali1563_adapter);
408 if (error)
409 goto exit_shutdown;
410 return 0;
411
412exit_shutdown:
413 ali1563_shutdown(dev);
414exit:
415 dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error);
416 return error;
417}
418
419static void ali1563_remove(struct pci_dev *dev)
420{
421 i2c_del_adapter(&ali1563_adapter);
422 ali1563_shutdown(dev);
423}
424
425static const struct pci_device_id ali1563_id_table[] = {
426 { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) },
427 {},
428};
429
430MODULE_DEVICE_TABLE(pci, ali1563_id_table);
431
432static struct pci_driver ali1563_pci_driver = {
433 .name = "ali1563_smbus",
434 .id_table = ali1563_id_table,
435 .probe = ali1563_probe,
436 .remove = ali1563_remove,
437};
438
439module_pci_driver(ali1563_pci_driver);
440
441MODULE_DESCRIPTION("i2c driver for the ALi 1563 Southbridge");
442MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
4 *
5 * Copyright (C) 2004 Patrick Mochel
6 * 2005 Rudolf Marek <r.marek@assembler.cz>
7 *
8 * The 1563 southbridge is deceptively similar to the 1533, with a
9 * few notable exceptions. One of those happens to be the fact they
10 * upgraded the i2c core to be 2.0 compliant, and happens to be almost
11 * identical to the i2c controller found in the Intel 801 south
12 * bridges.
13 *
14 * This driver is based on a mix of the 15x3, 1535, and i801 drivers,
15 * with a little help from the ALi 1563 spec.
16 */
17
18#include <linux/module.h>
19#include <linux/delay.h>
20#include <linux/i2c.h>
21#include <linux/pci.h>
22#include <linux/acpi.h>
23
24#define ALI1563_MAX_TIMEOUT 500
25#define ALI1563_SMBBA 0x80
26#define ALI1563_SMB_IOEN 1
27#define ALI1563_SMB_HOSTEN 2
28#define ALI1563_SMB_IOSIZE 16
29
30#define SMB_HST_STS (ali1563_smba + 0)
31#define SMB_HST_CNTL1 (ali1563_smba + 1)
32#define SMB_HST_CNTL2 (ali1563_smba + 2)
33#define SMB_HST_CMD (ali1563_smba + 3)
34#define SMB_HST_ADD (ali1563_smba + 4)
35#define SMB_HST_DAT0 (ali1563_smba + 5)
36#define SMB_HST_DAT1 (ali1563_smba + 6)
37#define SMB_BLK_DAT (ali1563_smba + 7)
38
39#define HST_STS_BUSY 0x01
40#define HST_STS_INTR 0x02
41#define HST_STS_DEVERR 0x04
42#define HST_STS_BUSERR 0x08
43#define HST_STS_FAIL 0x10
44#define HST_STS_DONE 0x80
45#define HST_STS_BAD 0x1c
46
47
48#define HST_CNTL1_TIMEOUT 0x80
49#define HST_CNTL1_LAST 0x40
50
51#define HST_CNTL2_KILL 0x04
52#define HST_CNTL2_START 0x40
53#define HST_CNTL2_QUICK 0x00
54#define HST_CNTL2_BYTE 0x01
55#define HST_CNTL2_BYTE_DATA 0x02
56#define HST_CNTL2_WORD_DATA 0x03
57#define HST_CNTL2_BLOCK 0x05
58
59
60#define HST_CNTL2_SIZEMASK 0x38
61
62static struct pci_driver ali1563_pci_driver;
63static unsigned short ali1563_smba;
64
65static int ali1563_transaction(struct i2c_adapter *a, int size)
66{
67 u32 data;
68 int timeout;
69 int status = -EIO;
70
71 dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, "
72 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
73 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
74 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
75 inb_p(SMB_HST_DAT1));
76
77 data = inb_p(SMB_HST_STS);
78 if (data & HST_STS_BAD) {
79 dev_err(&a->dev, "ali1563: Trying to reset busy device\n");
80 outb_p(data | HST_STS_BAD, SMB_HST_STS);
81 data = inb_p(SMB_HST_STS);
82 if (data & HST_STS_BAD)
83 return -EBUSY;
84 }
85 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
86
87 timeout = ALI1563_MAX_TIMEOUT;
88 do {
89 msleep(1);
90 } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
91
92 dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
93 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
94 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
95 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
96 inb_p(SMB_HST_DAT1));
97
98 if (timeout && !(data & HST_STS_BAD))
99 return 0;
100
101 if (!timeout) {
102 dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n");
103 /* Issue 'kill' to host controller */
104 outb_p(HST_CNTL2_KILL, SMB_HST_CNTL2);
105 data = inb_p(SMB_HST_STS);
106 status = -ETIMEDOUT;
107 }
108
109 /* device error - no response, ignore the autodetection case */
110 if (data & HST_STS_DEVERR) {
111 if (size != HST_CNTL2_QUICK)
112 dev_err(&a->dev, "Device error!\n");
113 status = -ENXIO;
114 }
115 /* bus collision */
116 if (data & HST_STS_BUSERR) {
117 dev_err(&a->dev, "Bus collision!\n");
118 /* Issue timeout, hoping it helps */
119 outb_p(HST_CNTL1_TIMEOUT, SMB_HST_CNTL1);
120 }
121
122 if (data & HST_STS_FAIL) {
123 dev_err(&a->dev, "Cleaning fail after KILL!\n");
124 outb_p(0x0, SMB_HST_CNTL2);
125 }
126
127 return status;
128}
129
130static int ali1563_block_start(struct i2c_adapter *a)
131{
132 u32 data;
133 int timeout;
134 int status = -EIO;
135
136 dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, "
137 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
138 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
139 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
140 inb_p(SMB_HST_DAT1));
141
142 data = inb_p(SMB_HST_STS);
143 if (data & HST_STS_BAD) {
144 dev_warn(&a->dev, "ali1563: Trying to reset busy device\n");
145 outb_p(data | HST_STS_BAD, SMB_HST_STS);
146 data = inb_p(SMB_HST_STS);
147 if (data & HST_STS_BAD)
148 return -EBUSY;
149 }
150
151 /* Clear byte-ready bit */
152 outb_p(data | HST_STS_DONE, SMB_HST_STS);
153
154 /* Start transaction and wait for byte-ready bit to be set */
155 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
156
157 timeout = ALI1563_MAX_TIMEOUT;
158 do {
159 msleep(1);
160 } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
161
162 dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
163 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
164 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
165 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
166 inb_p(SMB_HST_DAT1));
167
168 if (timeout && !(data & HST_STS_BAD))
169 return 0;
170
171 if (timeout == 0)
172 status = -ETIMEDOUT;
173
174 if (data & HST_STS_DEVERR)
175 status = -ENXIO;
176
177 dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
178 timeout ? "" : "Timeout ",
179 data & HST_STS_FAIL ? "Transaction Failed " : "",
180 data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
181 data & HST_STS_DEVERR ? "Device Error " : "",
182 !(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
183 return status;
184}
185
186static int ali1563_block(struct i2c_adapter *a,
187 union i2c_smbus_data *data, u8 rw)
188{
189 int i, len;
190 int error = 0;
191
192 /* Do we need this? */
193 outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1);
194
195 if (rw == I2C_SMBUS_WRITE) {
196 len = data->block[0];
197 if (len < 1)
198 len = 1;
199 else if (len > 32)
200 len = 32;
201 outb_p(len, SMB_HST_DAT0);
202 outb_p(data->block[1], SMB_BLK_DAT);
203 } else
204 len = 32;
205
206 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2);
207
208 for (i = 0; i < len; i++) {
209 if (rw == I2C_SMBUS_WRITE) {
210 outb_p(data->block[i + 1], SMB_BLK_DAT);
211 error = ali1563_block_start(a);
212 if (error)
213 break;
214 } else {
215 error = ali1563_block_start(a);
216 if (error)
217 break;
218 if (i == 0) {
219 len = inb_p(SMB_HST_DAT0);
220 if (len < 1)
221 len = 1;
222 else if (len > 32)
223 len = 32;
224 }
225 data->block[i+1] = inb_p(SMB_BLK_DAT);
226 }
227 }
228 /* Do we need this? */
229 outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1);
230 return error;
231}
232
233static s32 ali1563_access(struct i2c_adapter *a, u16 addr,
234 unsigned short flags, char rw, u8 cmd,
235 int size, union i2c_smbus_data *data)
236{
237 int error = 0;
238 int timeout;
239 u32 reg;
240
241 for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) {
242 reg = inb_p(SMB_HST_STS);
243 if (!(reg & HST_STS_BUSY))
244 break;
245 }
246 if (!timeout)
247 dev_warn(&a->dev, "SMBus not idle. HST_STS = %02x\n", reg);
248 outb_p(0xff, SMB_HST_STS);
249
250 /* Map the size to what the chip understands */
251 switch (size) {
252 case I2C_SMBUS_QUICK:
253 size = HST_CNTL2_QUICK;
254 break;
255 case I2C_SMBUS_BYTE:
256 size = HST_CNTL2_BYTE;
257 break;
258 case I2C_SMBUS_BYTE_DATA:
259 size = HST_CNTL2_BYTE_DATA;
260 break;
261 case I2C_SMBUS_WORD_DATA:
262 size = HST_CNTL2_WORD_DATA;
263 break;
264 case I2C_SMBUS_BLOCK_DATA:
265 size = HST_CNTL2_BLOCK;
266 break;
267 default:
268 dev_warn(&a->dev, "Unsupported transaction %d\n", size);
269 error = -EOPNOTSUPP;
270 goto Done;
271 }
272
273 outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
274 outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) |
275 (size << 3), SMB_HST_CNTL2);
276
277 /* Write the command register */
278
279 switch (size) {
280 case HST_CNTL2_BYTE:
281 if (rw == I2C_SMBUS_WRITE)
282 /* Beware it uses DAT0 register and not CMD! */
283 outb_p(cmd, SMB_HST_DAT0);
284 break;
285 case HST_CNTL2_BYTE_DATA:
286 outb_p(cmd, SMB_HST_CMD);
287 if (rw == I2C_SMBUS_WRITE)
288 outb_p(data->byte, SMB_HST_DAT0);
289 break;
290 case HST_CNTL2_WORD_DATA:
291 outb_p(cmd, SMB_HST_CMD);
292 if (rw == I2C_SMBUS_WRITE) {
293 outb_p(data->word & 0xff, SMB_HST_DAT0);
294 outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1);
295 }
296 break;
297 case HST_CNTL2_BLOCK:
298 outb_p(cmd, SMB_HST_CMD);
299 error = ali1563_block(a, data, rw);
300 goto Done;
301 }
302
303 error = ali1563_transaction(a, size);
304 if (error)
305 goto Done;
306
307 if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
308 goto Done;
309
310 switch (size) {
311 case HST_CNTL2_BYTE: /* Result put in SMBHSTDAT0 */
312 data->byte = inb_p(SMB_HST_DAT0);
313 break;
314 case HST_CNTL2_BYTE_DATA:
315 data->byte = inb_p(SMB_HST_DAT0);
316 break;
317 case HST_CNTL2_WORD_DATA:
318 data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8);
319 break;
320 }
321Done:
322 return error;
323}
324
325static u32 ali1563_func(struct i2c_adapter *a)
326{
327 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
328 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
329 I2C_FUNC_SMBUS_BLOCK_DATA;
330}
331
332
333static int ali1563_setup(struct pci_dev *dev)
334{
335 u16 ctrl;
336
337 pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
338
339 /* SMB I/O Base in high 12 bits and must be aligned with the
340 * size of the I/O space. */
341 ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1);
342 if (!ali1563_smba) {
343 dev_warn(&dev->dev, "ali1563_smba Uninitialized\n");
344 goto Err;
345 }
346
347 /* Check if device is enabled */
348 if (!(ctrl & ALI1563_SMB_HOSTEN)) {
349 dev_warn(&dev->dev, "Host Controller not enabled\n");
350 goto Err;
351 }
352 if (!(ctrl & ALI1563_SMB_IOEN)) {
353 dev_warn(&dev->dev, "I/O space not enabled, trying manually\n");
354 pci_write_config_word(dev, ALI1563_SMBBA,
355 ctrl | ALI1563_SMB_IOEN);
356 pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
357 if (!(ctrl & ALI1563_SMB_IOEN)) {
358 dev_err(&dev->dev,
359 "I/O space still not enabled, giving up\n");
360 goto Err;
361 }
362 }
363
364 if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE,
365 ali1563_pci_driver.name))
366 goto Err;
367
368 if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
369 ali1563_pci_driver.name)) {
370 dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n",
371 ali1563_smba);
372 goto Err;
373 }
374 dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba);
375
376 return 0;
377Err:
378 return -ENODEV;
379}
380
381static void ali1563_shutdown(struct pci_dev *dev)
382{
383 release_region(ali1563_smba, ALI1563_SMB_IOSIZE);
384}
385
386static const struct i2c_algorithm ali1563_algorithm = {
387 .smbus_xfer = ali1563_access,
388 .functionality = ali1563_func,
389};
390
391static struct i2c_adapter ali1563_adapter = {
392 .owner = THIS_MODULE,
393 .class = I2C_CLASS_HWMON,
394 .algo = &ali1563_algorithm,
395};
396
397static int ali1563_probe(struct pci_dev *dev,
398 const struct pci_device_id *id_table)
399{
400 int error;
401
402 error = ali1563_setup(dev);
403 if (error)
404 goto exit;
405 ali1563_adapter.dev.parent = &dev->dev;
406 snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name),
407 "SMBus ALi 1563 Adapter @ %04x", ali1563_smba);
408 error = i2c_add_adapter(&ali1563_adapter);
409 if (error)
410 goto exit_shutdown;
411 return 0;
412
413exit_shutdown:
414 ali1563_shutdown(dev);
415exit:
416 dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error);
417 return error;
418}
419
420static void ali1563_remove(struct pci_dev *dev)
421{
422 i2c_del_adapter(&ali1563_adapter);
423 ali1563_shutdown(dev);
424}
425
426static const struct pci_device_id ali1563_id_table[] = {
427 { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) },
428 {},
429};
430
431MODULE_DEVICE_TABLE(pci, ali1563_id_table);
432
433static struct pci_driver ali1563_pci_driver = {
434 .name = "ali1563_smbus",
435 .id_table = ali1563_id_table,
436 .probe = ali1563_probe,
437 .remove = ali1563_remove,
438};
439
440module_pci_driver(ali1563_pci_driver);
441
442MODULE_LICENSE("GPL");