1# SPDX-License-Identifier: GPL-2.0-only
   2#
   3# RTC class/drivers configuration
   4#
   5
   6config RTC_LIB
   7	bool
   8
   9config RTC_MC146818_LIB
  10	bool
  11	select RTC_LIB
  12
  13menuconfig RTC_CLASS
  14	bool "Real Time Clock"
  15	default n
  16	depends on !S390
  17	select RTC_LIB
  18	help
  19	  Generic RTC class support. If you say yes here, you will
  20	  be allowed to plug one or more RTCs to your system. You will
  21	  probably want to enable one or more of the interfaces below.
  22
  23if RTC_CLASS
  24
  25config RTC_HCTOSYS
  26	bool "Set system time from RTC on startup and resume"
  27	default y
  28	help
  29	  If you say yes here, the system time (wall clock) will be set using
  30	  the value read from a specified RTC device. This is useful to avoid
  31	  unnecessary fsck runs at boot time, and to network better.
  32
  33config RTC_HCTOSYS_DEVICE
  34	string "RTC used to set the system time"
  35	depends on RTC_HCTOSYS
  36	default "rtc0"
  37	help
  38	  The RTC device that will be used to (re)initialize the system
  39	  clock, usually rtc0. Initialization is done when the system
  40	  starts up, and when it resumes from a low power state. This
  41	  device should record time in UTC, since the kernel won't do
  42	  timezone correction.
  43
  44	  This clock should be battery-backed, so that it reads the correct
  45	  time when the system boots from a power-off state. Otherwise, your
  46	  system will need an external clock source (like an NTP server).
  47
  48	  If the clock you specify here is not battery backed, it may still
  49	  be useful to reinitialize system time when resuming from system
  50	  sleep states. Do not specify an RTC here unless it stays powered
  51	  during all this system's supported sleep states.
  52
  53config RTC_SYSTOHC
  54	bool "Set the RTC time based on NTP synchronization"
  55	default y
  56	help
  57	  If you say yes here, the system time (wall clock) will be stored
  58	  in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11
  59	  minutes if userspace reports synchronized NTP status.
  60
  61config RTC_SYSTOHC_DEVICE
  62	string "RTC used to synchronize NTP adjustment"
  63	depends on RTC_SYSTOHC
  64	default RTC_HCTOSYS_DEVICE if RTC_HCTOSYS
  65	default "rtc0"
  66	help
  67	  The RTC device used for NTP synchronization. The main difference
  68	  between RTC_HCTOSYS_DEVICE and RTC_SYSTOHC_DEVICE is that this
  69	  one can sleep when setting time, because it runs in the workqueue
  70	  context.
  71
  72config RTC_DEBUG
  73	bool "RTC debug support"
  74	help
  75	  Say yes here to enable debugging support in the RTC framework
  76	  and individual RTC drivers.
  77
  78config RTC_LIB_KUNIT_TEST
  79	tristate "KUnit test for RTC lib functions" if !KUNIT_ALL_TESTS
  80	depends on KUNIT
  81	default KUNIT_ALL_TESTS
  82	help
  83	  Enable this option to test RTC library functions.
  84
  85	  If unsure, say N.
  86
  87config RTC_NVMEM
  88	bool "RTC non volatile storage support"
  89	select NVMEM
  90	default RTC_CLASS
  91	help
  92	  Say yes here to add support for the non volatile (often battery
  93	  backed) storage present on RTCs.
  94
  95comment "RTC interfaces"
  96
  97config RTC_INTF_SYSFS
  98	bool "/sys/class/rtc/rtcN (sysfs)"
  99	depends on SYSFS
 100	default RTC_CLASS
 101	help
 102	  Say yes here if you want to use your RTCs using sysfs interfaces,
 103	  /sys/class/rtc/rtc0 through /sys/.../rtcN.
 104
 105	  If unsure, say Y.
 106
 107config RTC_INTF_PROC
 108	bool "/proc/driver/rtc (procfs for rtcN)"
 109	depends on PROC_FS
 110	default RTC_CLASS
 111	help
 112	  Say yes here if you want to use your system clock RTC through
 113	  the proc interface, /proc/driver/rtc.
 114	  Other RTCs will not be available through that API.
 115	  If there is no RTC for the system clock, then the first RTC(rtc0)
 116	  is used by default.
 117
 118	  If unsure, say Y.
 119
 120config RTC_INTF_DEV
 121	bool "/dev/rtcN (character devices)"
 122	default RTC_CLASS
 123	help
 124	  Say yes here if you want to use your RTCs using the /dev
 125	  interfaces, which "udev" sets up as /dev/rtc0 through
 126	  /dev/rtcN.
 127
 128	  You may want to set up a symbolic link so one of these
 129	  can be accessed as /dev/rtc, which is a name
 130	  expected by "hwclock" and some other programs. Recent
 131	  versions of "udev" are known to set up the symlink for you.
 132
 133	  If unsure, say Y.
 134
 135config RTC_INTF_DEV_UIE_EMUL
 136	bool "RTC UIE emulation on dev interface"
 137	depends on RTC_INTF_DEV
 138	help
 139	  Provides an emulation for RTC_UIE if the underlying rtc chip
 140	  driver does not expose RTC_UIE ioctls. Those requests generate
 141	  once-per-second update interrupts, used for synchronization.
 142
 143	  The emulation code will read the time from the hardware
 144	  clock several times per second, please enable this option
 145	  only if you know that you really need it.
 146
 147config RTC_DRV_TEST
 148	tristate "Test driver/device"
 149	help
 150	  If you say yes here you get support for the
 151	  RTC test driver. It's a software RTC which can be
 152	  used to test the RTC subsystem APIs. It gets
 153	  the time from the system clock.
 154	  You want this driver only if you are doing development
 155	  on the RTC subsystem. Please read the source code
 156	  for further details.
 157
 158	  This driver can also be built as a module. If so, the module
 159	  will be called rtc-test.
 160
 161comment "I2C RTC drivers"
 162
 163if I2C
 164
 165config RTC_DRV_88PM860X
 166	tristate "Marvell 88PM860x"
 167	depends on MFD_88PM860X
 168	help
 169	  If you say yes here you get support for RTC function in Marvell
 170	  88PM860x chips.
 171
 172	  This driver can also be built as a module. If so, the module
 173	  will be called rtc-88pm860x.
 174
 175config RTC_DRV_88PM80X
 176	tristate "Marvell 88PM80x"
 177	depends on MFD_88PM800
 178	help
 179	  If you say yes here you get support for RTC function in Marvell
 180	  88PM80x chips.
 181
 182	  This driver can also be built as a module. If so, the module
 183	  will be called rtc-88pm80x.
 184
 185config RTC_DRV_88PM886
 186	tristate "Marvell 88PM886 RTC driver"
 187	depends on MFD_88PM886_PMIC
 188	help
 189	  If you say yes here you will get support for the RTC function in the
 190	  Marvell 88PM886 chip.
 191
 192	  This driver can also be built as a module. If so, the module
 193	  will be called rtc-88pm886.
 194
 195config RTC_DRV_ABB5ZES3
 196	select REGMAP_I2C
 197	tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
 198	help
 199	  If you say yes here you get support for the Abracon
 200	  AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip.
 201
 202	  This driver can also be built as a module. If so, the module
 203	  will be called rtc-ab-b5ze-s3.
 204
 205config RTC_DRV_ABEOZ9
 206	select REGMAP_I2C
 207	tristate "Abracon AB-RTCMC-32.768kHz-EOZ9"
 208	help
 209	  If you say yes here you get support for the Abracon
 210	  AB-RTCMC-32.768kHz-EOA9 I2C RTC chip.
 211
 212	  This driver can also be built as a module. If so, the module
 213	  will be called rtc-ab-e0z9.
 214
 215config RTC_DRV_ABX80X
 216	tristate "Abracon ABx80x"
 217	select WATCHDOG_CORE if WATCHDOG
 218	help
 219	  If you say yes here you get support for Abracon AB080X and AB180X
 220	  families of ultra-low-power  battery- and capacitor-backed real-time
 221	  clock chips.
 222
 223	  This driver can also be built as a module. If so, the module
 224	  will be called rtc-abx80x.
 225
 226config RTC_DRV_AC100
 227	tristate "X-Powers AC100"
 228	depends on MFD_AC100
 229	help
 230	  If you say yes here you get support for the real-time clock found
 231	  in X-Powers AC100 family peripheral ICs.
 232
 233	  This driver can also be built as a module. If so, the module
 234	  will be called rtc-ac100.
 235
 236config RTC_DRV_BRCMSTB
 237	tristate "Broadcom STB wake-timer"
 238	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
 239	default ARCH_BRCMSTB || BMIPS_GENERIC
 240	help
 241	  If you say yes here you get support for the wake-timer found on
 242	  Broadcom STB SoCs (BCM7xxx).
 243
 244	  This driver can also be built as a module. If so, the module will
 245	  be called rtc-brcmstb-waketimer.
 246
 247config RTC_DRV_AS3722
 248	tristate "ams AS3722 RTC driver"
 249	depends on MFD_AS3722
 250	help
 251	  If you say yes here you get support for the RTC of ams AS3722 PMIC
 252	  chips.
 253
 254	  This driver can also be built as a module. If so, the module
 255	  will be called rtc-as3722.
 256
 257config RTC_DRV_DS1307
 258	tristate "Dallas/Maxim DS1307/37/38/39/40/41, ST M41T00, EPSON RX-8025, ISL12057"
 259	select REGMAP_I2C
 260	select WATCHDOG_CORE if WATCHDOG
 261	help
 262	  If you say yes here you get support for various compatible RTC
 263	  chips (often with battery backup) connected with I2C. This driver
 264	  should handle DS1307, DS1337, DS1338, DS1339, DS1340, DS1341,
 265	  ST M41T00, EPSON RX-8025, Intersil ISL12057 and probably other chips.
 266	  In some cases the RTC must already have been initialized (by
 267	  manufacturing or a bootloader).
 268
 269	  The first seven registers on these chips hold an RTC, and other
 270	  registers may add features such as NVRAM, a trickle charger for
 271	  the RTC/NVRAM backup power, and alarms. NVRAM is visible in
 272	  sysfs, but other chip features may not be available.
 273
 274	  This driver can also be built as a module. If so, the module
 275	  will be called rtc-ds1307.
 276
 277config RTC_DRV_DS1307_CENTURY
 278	bool "Century bit support for rtc-ds1307"
 279	depends on RTC_DRV_DS1307
 280	default n
 281	help
 282	  The DS1307 driver suffered from a bug where it was enabling the
 283	  century bit inconditionnally but never used it when reading the time.
 284	  It made the driver unable to support dates beyond 2099.
 285	  Setting this option will add proper support for the century bit but if
 286	  the time was previously set using a kernel predating this option,
 287	  reading the date will return a date in the next century.
 288	  To solve that, you could boot a kernel without this option set, set
 289	  the RTC date and then boot a kernel with this option set.
 290
 291config RTC_DRV_DS1374
 292	tristate "Dallas/Maxim DS1374"
 293	help
 294	  If you say yes here you get support for Dallas Semiconductor
 295	  DS1374 real-time clock chips. If an interrupt is associated
 296	  with the device, the alarm functionality is supported.
 297
 298	  This driver can also be built as a module. If so, the module
 299	  will be called rtc-ds1374.
 300
 301config RTC_DRV_DS1374_WDT
 302	bool "Dallas/Maxim DS1374 watchdog timer"
 303	depends on RTC_DRV_DS1374 && WATCHDOG
 304	select WATCHDOG_CORE
 305	help
 306	  If you say Y here you will get support for the
 307	  watchdog timer in the Dallas Semiconductor DS1374
 308	  real-time clock chips.
 309
 310config RTC_DRV_DS1672
 311	tristate "Dallas/Maxim DS1672"
 312	help
 313	  If you say yes here you get support for the
 314	  Dallas/Maxim DS1672 timekeeping chip.
 315
 316	  This driver can also be built as a module. If so, the module
 317	  will be called rtc-ds1672.
 318
 319config RTC_DRV_HYM8563
 320	tristate "Haoyu Microelectronics HYM8563"
 321	depends on OF
 322	help
 323	  Say Y to enable support for the HYM8563 I2C RTC chip. Apart
 324	  from the usual rtc functions it provides a clock output of
 325	  up to 32kHz.
 326
 327	  This driver can also be built as a module. If so, the module
 328	  will be called rtc-hym8563.
 329
 330config RTC_DRV_LP8788
 331	tristate "TI LP8788 RTC driver"
 332	depends on MFD_LP8788
 333	help
 334	  Say Y to enable support for the LP8788 RTC/ALARM driver.
 335
 336config RTC_DRV_MAX6900
 337	tristate "Maxim MAX6900"
 338	help
 339	  If you say yes here you will get support for the
 340	  Maxim MAX6900 I2C RTC chip.
 341
 342	  This driver can also be built as a module. If so, the module
 343	  will be called rtc-max6900.
 344
 345config RTC_DRV_MAX8907
 346	tristate "Maxim MAX8907"
 347	depends on MFD_MAX8907 || COMPILE_TEST
 348	select REGMAP_IRQ
 349	help
 350	  If you say yes here you will get support for the
 351	  RTC of Maxim MAX8907 PMIC.
 352
 353	  This driver can also be built as a module. If so, the module
 354	  will be called rtc-max8907.
 355
 356config RTC_DRV_MAX8925
 357	tristate "Maxim MAX8925"
 358	depends on MFD_MAX8925
 359	help
 360	  If you say yes here you will get support for the
 361	  RTC of Maxim MAX8925 PMIC.
 362
 363	  This driver can also be built as a module. If so, the module
 364	  will be called rtc-max8925.
 365
 366config RTC_DRV_MAX8998
 367	tristate "Maxim MAX8998"
 368	depends on MFD_MAX8998
 369	help
 370	  If you say yes here you will get support for the
 371	  RTC of Maxim MAX8998 PMIC.
 372
 373	  This driver can also be built as a module. If so, the module
 374	  will be called rtc-max8998.
 375
 376config RTC_DRV_MAX8997
 377	tristate "Maxim MAX8997"
 378	depends on MFD_MAX8997
 379	help
 380	  If you say yes here you will get support for the
 381	  RTC of Maxim MAX8997 PMIC.
 382
 383	  This driver can also be built as a module. If so, the module
 384	  will be called rtc-max8997.
 385
 386config RTC_DRV_MAX31335
 387	tristate "Analog Devices MAX31335"
 388	depends on I2C
 389	depends on COMMON_CLK
 390	depends on HWMON || HWMON=n
 391	select REGMAP_I2C
 392	help
 393	  If you say yes here you get support for the Analog Devices
 394	  MAX31335.
 395
 396	  This driver can also be built as a module. If so, the module
 397	  will be called rtc-max31335.
 398
 399config RTC_DRV_MAX77686
 400	tristate "Maxim MAX77686"
 401	depends on MFD_MAX77686 || MFD_MAX77620 || MFD_MAX77714 || COMPILE_TEST
 402	help
 403	  If you say yes here you will get support for the
 404	  RTC of Maxim MAX77686/MAX77620/MAX77802 PMIC.
 405
 406	  This driver can also be built as a module. If so, the module
 407	  will be called rtc-max77686.
 408
 409config RTC_DRV_NCT3018Y
 410	tristate "Nuvoton NCT3018Y"
 411	depends on OF
 412	help
 413	   If you say yes here you get support for the Nuvoton NCT3018Y I2C RTC
 414	   chip.
 415
 416	   This driver can also be built as a module, if so, the module will be
 417	   called "rtc-nct3018y".
 418
 419config RTC_DRV_RK808
 420	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 RTC"
 421	depends on MFD_RK8XX
 422	help
 423	  If you say yes here you will get support for the
 424	  RTC of RK805, RK809 and RK817, RK808 and RK818 PMIC.
 425
 426	  This driver can also be built as a module. If so, the module
 427	  will be called rk808-rtc.
 428
 429config RTC_DRV_RS5C372
 430	tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A"
 431	help
 432	  If you say yes here you get support for the
 433	  Ricoh R2025S/D, RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips.
 434
 435	  This driver can also be built as a module. If so, the module
 436	  will be called rtc-rs5c372.
 437
 438config RTC_DRV_ISL1208
 439	tristate "Intersil ISL1208"
 440	help
 441	  If you say yes here you get support for the
 442	  Intersil ISL1208 RTC chip.
 443
 444	  This driver can also be built as a module. If so, the module
 445	  will be called rtc-isl1208.
 446
 447config RTC_DRV_ISL12022
 448	tristate "Intersil ISL12022"
 449	select REGMAP_I2C
 450	help
 451	  If you say yes here you get support for the
 452	  Intersil ISL12022 RTC chip.
 453
 454	  This driver can also be built as a module. If so, the module
 455	  will be called rtc-isl12022.
 456
 457config RTC_DRV_ISL12026
 458	tristate "Intersil ISL12026"
 459	depends on OF
 460	help
 461	  If you say yes here you get support for the
 462	  Intersil ISL12026 RTC chip.
 463
 464	  This driver can also be built as a module. If so, the module
 465	  will be called rtc-isl12026.
 466
 467config RTC_DRV_X1205
 468	tristate "Xicor/Intersil X1205"
 469	help
 470	  If you say yes here you get support for the
 471	  Xicor/Intersil X1205 RTC chip.
 472
 473	  This driver can also be built as a module. If so, the module
 474	  will be called rtc-x1205.
 475
 476config RTC_DRV_PCF8523
 477	tristate "NXP PCF8523"
 478	select REGMAP_I2C
 479	help
 480	  If you say yes here you get support for the NXP PCF8523 RTC
 481	  chips.
 482
 483	  This driver can also be built as a module. If so, the module
 484	  will be called rtc-pcf8523.
 485
 486config RTC_DRV_PCF85063
 487	tristate "NXP PCF85063"
 488	select REGMAP_I2C
 489	help
 490	  If you say yes here you get support for the PCF85063 RTC chip
 491
 492	  This driver can also be built as a module. If so, the module
 493	  will be called rtc-pcf85063.
 494
 495config RTC_DRV_PCF85363
 496	tristate "NXP PCF85363"
 497	select REGMAP_I2C
 498	help
 499	  If you say yes here you get support for the PCF85363 RTC chip.
 500
 501	  This driver can also be built as a module. If so, the module
 502	  will be called rtc-pcf85363.
 503
 504	  The nvmem interface will be named pcf85363-#, where # is the
 505	  zero-based instance number.
 506
 507config RTC_DRV_PCF8563
 508	tristate "Philips PCF8563/Epson RTC8564"
 509	select REGMAP_I2C
 510	help
 511	  If you say yes here you get support for the
 512	  Philips PCF8563 RTC chip. The Epson RTC8564
 513	  should work as well.
 514
 515	  This driver can also be built as a module. If so, the module
 516	  will be called rtc-pcf8563.
 517
 518config RTC_DRV_PCF8583
 519	tristate "Philips PCF8583"
 520	help
 521	  If you say yes here you get support for the Philips PCF8583
 522	  RTC chip found on Acorn RiscPCs. This driver supports the
 523	  platform specific method of retrieving the current year from
 524	  the RTC's SRAM. It will work on other platforms with the same
 525	  chip, but the year will probably have to be tweaked.
 526
 527	  This driver can also be built as a module. If so, the module
 528	  will be called rtc-pcf8583.
 529
 530config RTC_DRV_M41T80
 531	tristate "ST M41T62/65/M41T80/81/82/83/84/85/87 and compatible"
 532	help
 533	  If you say Y here you will get support for the ST M41T60
 534	  and M41T80 RTC chips series. Currently, the following chips are
 535	  supported: M41T62, M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
 536	  M41ST85, M41ST87, and MicroCrystal RV4162.
 537
 538	  This driver can also be built as a module. If so, the module
 539	  will be called rtc-m41t80.
 540
 541config RTC_DRV_M41T80_WDT
 542	bool "ST M41T65/M41T80 series RTC watchdog timer"
 543	depends on RTC_DRV_M41T80
 544	help
 545	  If you say Y here you will get support for the
 546	  watchdog timer in the ST M41T60 and M41T80 RTC chips series.
 547
 548config RTC_DRV_BD70528
 549	tristate "ROHM BD71815 and BD71828 PMIC RTC"
 550	depends on MFD_ROHM_BD71828
 551	help
 552	  If you say Y here you will get support for the RTC
 553	  block on ROHM BD71815 and BD71828 Power Management IC.
 554
 555	  This driver can also be built as a module. If so, the module
 556	  will be called rtc-bd70528.
 557
 558config RTC_DRV_BQ32K
 559	tristate "TI BQ32000"
 560	help
 561	  If you say Y here you will get support for the TI
 562	  BQ32000 I2C RTC chip.
 563
 564	  This driver can also be built as a module. If so, the module
 565	  will be called rtc-bq32k.
 566
 567config RTC_DRV_TWL92330
 568	bool "TI TWL92330/Menelaus"
 569	depends on MENELAUS
 570	help
 571	  If you say yes here you get support for the RTC on the
 572	  TWL92330 "Menelaus" power management chip, used with OMAP2
 573	  platforms. The support is integrated with the rest of
 574	  the Menelaus driver; it's not separate module.
 575
 576config RTC_DRV_TWL4030
 577	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
 578	depends on TWL4030_CORE
 579	depends on OF
 580	help
 581	  If you say yes here you get support for the RTC on the
 582	  TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms.
 583
 584	  This driver can also be built as a module. If so, the module
 585	  will be called rtc-twl.
 586
 587config RTC_DRV_PALMAS
 588	tristate "TI Palmas RTC driver"
 589	depends on MFD_PALMAS
 590	help
 591	  If you say yes here you get support for the RTC of TI PALMA series PMIC
 592	  chips.
 593
 594	  This driver can also be built as a module. If so, the module
 595	  will be called rtc-palma.
 596
 597config RTC_DRV_TPS6586X
 598	tristate "TI TPS6586X RTC driver"
 599	depends on MFD_TPS6586X
 600	help
 601	  TI Power Management IC TPS6586X supports RTC functionality
 602	  along with alarm. This driver supports the RTC driver for
 603	  the TPS6586X RTC module.
 604
 605config RTC_DRV_TPS6594
 606	tristate "TI TPS6594 RTC driver"
 607	depends on MFD_TPS6594
 608	default MFD_TPS6594
 609	help
 610	  TI Power Management IC TPS6594 supports RTC functionality
 611	  along with alarm. This driver supports the RTC driver for
 612	  the TPS6594 RTC module.
 613
 614	  This driver can also be built as a module. If so, the module
 615	  will be called rtc-tps6594.
 616
 617config RTC_DRV_TPS65910
 618	tristate "TI TPS65910 RTC driver"
 619	depends on MFD_TPS65910
 620	help
 621	  If you say yes here you get support for the RTC on the
 622	  TPS65910 chips.
 623
 624	  This driver can also be built as a module. If so, the module
 625	  will be called rtc-tps65910.
 626
 627config RTC_DRV_RC5T583
 628	tristate "RICOH 5T583 RTC driver"
 629	depends on MFD_RC5T583
 630	help
 631	  If you say yes here you get support for the RTC on the
 632	  RICOH 5T583 chips.
 633
 634	  This driver can also be built as a module. If so, the module
 635	  will be called rtc-rc5t583.
 636
 637config RTC_DRV_RC5T619
 638	tristate "RICOH RC5T619 RTC driver"
 639	depends on MFD_RN5T618
 640	help
 641	  If you say yes here you get support for the RTC on the
 642	  RICOH RC5T619 chips.
 643
 644	  This driver can also be built as a module. If so, the module
 645	  will be called rtc-rc5t619.
 646
 647config RTC_DRV_S35390A
 648	tristate "Seiko Instruments S-35390A"
 649	select BITREVERSE
 650	help
 651	  If you say yes here you will get support for the Seiko
 652	  Instruments S-35390A.
 653
 654	  This driver can also be built as a module. If so the module
 655	  will be called rtc-s35390a.
 656
 657config RTC_DRV_FM3130
 658	tristate "Ramtron FM3130"
 659	help
 660	  If you say Y here you will get support for the
 661	  Ramtron FM3130 RTC chips.
 662	  Ramtron FM3130 is a chip with two separate devices inside,
 663	  RTC clock and FRAM. This driver provides only RTC functionality.
 664
 665	  This driver can also be built as a module. If so the module
 666	  will be called rtc-fm3130.
 667
 668config RTC_DRV_RX8010
 669	tristate "Epson RX8010SJ"
 670	select REGMAP_I2C
 671	help
 672	  If you say yes here you get support for the Epson RX8010SJ RTC
 673	  chip.
 674
 675	  This driver can also be built as a module. If so, the module
 676	  will be called rtc-rx8010.
 677
 678config RTC_DRV_RX8111
 679	tristate "Epson RX8111"
 680	select REGMAP_I2C
 681	depends on I2C
 682	help
 683	  If you say yes here you will get support for the Epson RX8111 RTC.
 684
 685	  This driver can also be built as a module. If so, the module will be
 686	  called rtc-rx8111.
 687
 688config RTC_DRV_RX8581
 689	tristate "Epson RX-8571/RX-8581"
 690	select REGMAP_I2C
 691	help
 692	  If you say yes here you will get support for the Epson RX-8571/
 693	  RX-8581.
 694
 695	  This driver can also be built as a module. If so the module
 696	  will be called rtc-rx8581.
 697
 698config RTC_DRV_RX8025
 699	tristate "Epson RX-8025SA/NB"
 700	help
 701	  If you say yes here you get support for the Epson
 702	  RX-8025SA/NB RTC chips.
 703
 704	  This driver can also be built as a module. If so, the module
 705	  will be called rtc-rx8025.
 706
 707config RTC_DRV_EM3027
 708	tristate "EM Microelectronic EM3027"
 709	help
 710	  If you say yes here you get support for the EM
 711	  Microelectronic EM3027 RTC chips.
 712
 713	  This driver can also be built as a module. If so, the module
 714	  will be called rtc-em3027.
 715
 716config RTC_DRV_RV3028
 717	tristate "Micro Crystal RV3028"
 718	select REGMAP_I2C
 719	help
 720	  If you say yes here you get support for the Micro Crystal
 721	  RV3028.
 722
 723	  This driver can also be built as a module. If so, the module
 724	  will be called rtc-rv3028.
 725
 726config RTC_DRV_RV3032
 727	tristate "Micro Crystal RV3032"
 728	select REGMAP_I2C
 729	help
 730	  If you say yes here you get support for the Micro Crystal
 731	  RV3032.
 732
 733	  This driver can also be built as a module. If so, the module
 734	  will be called rtc-rv3032.
 735
 736config RTC_DRV_RV8803
 737	tristate "Micro Crystal RV8803, Epson RX8900"
 738	help
 739	  If you say yes here you get support for the Micro Crystal RV8803 and
 740	  Epson RX8900 RTC chips.
 741
 742	  This driver can also be built as a module. If so, the module
 743	  will be called rtc-rv8803.
 744
 745config RTC_DRV_S5M
 746	tristate "Samsung S2M/S5M series"
 747	depends on MFD_SEC_CORE || COMPILE_TEST
 748	select REGMAP_IRQ
 749	select REGMAP_I2C
 750	help
 751	  If you say yes here you will get support for the
 752	  RTC of Samsung S2MPS14 and S5M PMIC series.
 753
 754	  This driver can also be built as a module. If so, the module
 755	  will be called rtc-s5m.
 756
 757config RTC_DRV_SD2405AL
 758	tristate "DFRobot SD2405AL"
 759	select REGMAP_I2C
 760	help
 761	  If you say yes here you will get support for the
 762	  DFRobot SD2405AL I2C RTC Module.
 763
 764	  This driver can also be built as a module. If so, the module
 765	  will be called rtc-sd2405al.
 766
 767config RTC_DRV_SD3078
 768	tristate "ZXW Shenzhen whwave SD3078"
 769	select REGMAP_I2C
 770	help
 771	  If you say yes here you get support for the ZXW Shenzhen whwave
 772	  SD3078 RTC chips.
 773
 774	  This driver can also be built as a module. If so, the module
 775	  will be called rtc-sd3078
 776
 777endif # I2C
 778
 779comment "SPI RTC drivers"
 780
 781if SPI_MASTER
 782
 783config RTC_DRV_M41T93
 784	tristate "ST M41T93"
 785	help
 786	  If you say yes here you will get support for the
 787	  ST M41T93 SPI RTC chip.
 788
 789	  This driver can also be built as a module. If so, the module
 790	  will be called rtc-m41t93.
 791
 792config RTC_DRV_M41T94
 793	tristate "ST M41T94"
 794	help
 795	  If you say yes here you will get support for the
 796	  ST M41T94 SPI RTC chip.
 797
 798	  This driver can also be built as a module. If so, the module
 799	  will be called rtc-m41t94.
 800
 801config RTC_DRV_DS1302
 802	tristate "Dallas/Maxim DS1302"
 803	depends on SPI
 804	help
 805	  If you say yes here you get support for the Dallas DS1302 RTC chips.
 806
 807	  This driver can also be built as a module. If so, the module
 808	  will be called rtc-ds1302.
 809
 810config RTC_DRV_DS1305
 811	tristate "Dallas/Maxim DS1305/DS1306"
 812	help
 813	  Select this driver to get support for the Dallas/Maxim DS1305
 814	  and DS1306 real time clock chips. These support a trickle
 815	  charger, alarms, and NVRAM in addition to the clock.
 816
 817	  This driver can also be built as a module. If so, the module
 818	  will be called rtc-ds1305.
 819
 820config RTC_DRV_DS1343
 821	select REGMAP_SPI
 822	tristate "Dallas/Maxim DS1343/DS1344"
 823	help
 824	  If you say yes here you get support for the
 825	  Dallas/Maxim DS1343 and DS1344 real time clock chips.
 826	  Support for trickle charger, alarm is provided.
 827
 828	  This driver can also be built as a module. If so, the module
 829	  will be called rtc-ds1343.
 830
 831config RTC_DRV_DS1347
 832	select REGMAP_SPI
 833	tristate "Dallas/Maxim DS1347"
 834	help
 835	  If you say yes here you get support for the
 836	  Dallas/Maxim DS1347 chips.
 837
 838	  This driver only supports the RTC feature, and not other chip
 839	  features such as alarms.
 840
 841	  This driver can also be built as a module. If so, the module
 842	  will be called rtc-ds1347.
 843
 844config RTC_DRV_DS1390
 845	tristate "Dallas/Maxim DS1390/93/94"
 846	help
 847	  If you say yes here you get support for the
 848	  Dallas/Maxim DS1390/93/94 chips.
 849
 850	  This driver supports the RTC feature and trickle charging but not
 851	  other chip features such as alarms.
 852
 853	  This driver can also be built as a module. If so, the module
 854	  will be called rtc-ds1390.
 855
 856config RTC_DRV_MAX6916
 857	tristate "Maxim MAX6916"
 858	help
 859	  If you say yes here you will get support for the
 860	  Maxim MAX6916 SPI RTC chip.
 861
 862	  This driver only supports the RTC feature, and not other chip
 863	  features such as alarms.
 864
 865	  This driver can also be built as a module. If so, the module
 866	  will be called rtc-max6916.
 867
 868config RTC_DRV_R9701
 869	tristate "Epson RTC-9701JE"
 870	help
 871	  If you say yes here you will get support for the
 872	  Epson RTC-9701JE SPI RTC chip.
 873
 874	  This driver can also be built as a module. If so, the module
 875	  will be called rtc-r9701.
 876
 877config RTC_DRV_RX4581
 878	tristate "Epson RX-4581"
 879	help
 880	  If you say yes here you will get support for the Epson RX-4581.
 881
 882	  This driver can also be built as a module. If so the module
 883	  will be called rtc-rx4581.
 884
 885config RTC_DRV_RS5C348
 886	tristate "Ricoh RS5C348A/B"
 887	help
 888	  If you say yes here you get support for the
 889	  Ricoh RS5C348A and RS5C348B RTC chips.
 890
 891	  This driver can also be built as a module. If so, the module
 892	  will be called rtc-rs5c348.
 893
 894config RTC_DRV_MAX6902
 895	tristate "Maxim MAX6902"
 896	help
 897	  If you say yes here you will get support for the
 898	  Maxim MAX6902 SPI RTC chip.
 899
 900	  This driver can also be built as a module. If so, the module
 901	  will be called rtc-max6902.
 902
 903config RTC_DRV_PCF2123
 904	tristate "NXP PCF2123"
 905	select REGMAP_SPI
 906	help
 907	  If you say yes here you get support for the NXP PCF2123
 908	  RTC chip.
 909
 910	  This driver can also be built as a module. If so, the module
 911	  will be called rtc-pcf2123.
 912
 913config RTC_DRV_MCP795
 914	tristate "Microchip MCP795"
 915	help
 916	  If you say yes here you will get support for the Microchip MCP795.
 917
 918	  This driver can also be built as a module. If so the module
 919	  will be called rtc-mcp795.
 920
 921endif # SPI_MASTER
 922
 923#
 924# Helper to resolve issues with configs that have SPI enabled but I2C
 925# modular.  See SND_SOC_I2C_AND_SPI for more information
 926#
 927config RTC_I2C_AND_SPI
 928	tristate
 929	default m if I2C=m
 930	default y if I2C=y
 931	default y if SPI_MASTER=y
 932
 933comment "SPI and I2C RTC drivers"
 934
 935config RTC_DRV_DS3232
 936	tristate "Dallas/Maxim DS3232/DS3234"
 937	depends on RTC_I2C_AND_SPI
 938	select REGMAP_I2C if I2C
 939	select REGMAP_SPI if SPI_MASTER
 940	help
 941	  If you say yes here you get support for Dallas Semiconductor
 942	  DS3232 and DS3234 real-time clock chips. If an interrupt is associated
 943	  with the device, the alarm functionality is supported.
 944
 945	  This driver can also be built as a module.  If so, the module
 946	  will be called rtc-ds3232.
 947
 948config RTC_DRV_DS3232_HWMON
 949	bool "HWMON support for Dallas/Maxim DS3232/DS3234"
 950	depends on RTC_DRV_DS3232 && HWMON && !(RTC_DRV_DS3232=y && HWMON=m)
 951	default y
 952	help
 953	  Say Y here if you want to expose temperature sensor data on
 954	  rtc-ds3232
 955
 956config RTC_DRV_PCF2127
 957	tristate "NXP PCF2127"
 958	depends on RTC_I2C_AND_SPI
 959	select REGMAP_I2C if I2C
 960	select REGMAP_SPI if SPI_MASTER
 961	select WATCHDOG_CORE if WATCHDOG
 962	help
 963	  If you say yes here you get support for the NXP PCF2127/29/31 RTC
 964	  chips with integrated quartz crystal for industrial applications.
 965	  These chips also have watchdog timer and tamper switch detection
 966	  features.
 967
 968	  PCF2127 has an additional feature of 512 bytes battery backed
 969	  memory that's accessible using nvmem interface.
 970
 971	  This driver can also be built as a module. If so, the module
 972	  will be called rtc-pcf2127.
 973
 974config RTC_DRV_RV3029C2
 975	tristate "Micro Crystal RV3029/3049"
 976	depends on RTC_I2C_AND_SPI
 977	select REGMAP_I2C if I2C
 978	select REGMAP_SPI if SPI_MASTER
 979	help
 980	  If you say yes here you get support for the Micro Crystal
 981	  RV3029 and RV3049 RTC chips.
 982
 983	  This driver can also be built as a module. If so, the module
 984	  will be called rtc-rv3029c2.
 985
 986config RTC_DRV_RV3029_HWMON
 987	bool "HWMON support for RV3029/3049"
 988	depends on RTC_DRV_RV3029C2 && HWMON
 989	depends on !(RTC_DRV_RV3029C2=y && HWMON=m)
 990	default y
 991	help
 992	  Say Y here if you want to expose temperature sensor data on
 993	  rtc-rv3029.
 994
 995config RTC_DRV_RX6110
 996	tristate "Epson RX-6110"
 997	depends on RTC_I2C_AND_SPI
 998	select REGMAP_SPI if SPI_MASTER
 999	select REGMAP_I2C if I2C
1000	help
1001	  If you say yes here you will get support for the Epson RX-6110.
1002
1003	  This driver can also be built as a module. If so the module
1004	  will be called rtc-rx6110.
1005
1006comment "Platform RTC drivers"
1007
1008# this 'CMOS' RTC driver is arch dependent because it requires
1009# <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a
1010# global rtc_lock ... it's not yet just another platform_device.
1011
1012config RTC_DRV_CMOS
1013	tristate "PC-style 'CMOS'"
1014	depends on X86 || ARM || PPC || MIPS || SPARC64
1015	depends on HAS_IOPORT || MACH_DECSTATION
1016	default y if X86
1017	select RTC_MC146818_LIB
1018	help
1019	  Say "yes" here to get direct support for the real time clock
1020	  found in every PC or ACPI-based system, and some other boards.
1021	  Specifically the original MC146818, compatibles like those in
1022	  PC south bridges, the DS12887 or M48T86, some multifunction
1023	  or LPC bus chips, and so on.
1024
1025	  Your system will need to define the platform device used by
1026	  this driver, otherwise it won't be accessible. This means
1027	  you can safely enable this driver if you don't know whether
1028	  or not your board has this kind of hardware.
1029
1030	  This driver can also be built as a module. If so, the module
1031	  will be called rtc-cmos.
1032
1033config RTC_DRV_ALPHA
1034	bool "Alpha PC-style CMOS"
1035	depends on ALPHA
1036	depends on HAS_IOPORT
1037	select RTC_MC146818_LIB
1038	default y
1039	help
1040	  Direct support for the real-time clock found on every Alpha
1041	  system, specifically MC146818 compatibles.  If in doubt, say Y.
1042
1043config RTC_DRV_DS1216
1044	tristate "Dallas DS1216"
1045	depends on SNI_RM
1046	help
1047	  If you say yes here you get support for the Dallas DS1216 RTC chips.
1048
1049config RTC_DRV_DS1286
1050	tristate "Dallas DS1286"
1051	depends on HAS_IOMEM
1052	help
1053	  If you say yes here you get support for the Dallas DS1286 RTC chips.
1054
1055config RTC_DRV_DS1511
1056	tristate "Dallas DS1511"
1057	depends on HAS_IOMEM
1058	help
1059	  If you say yes here you get support for the
1060	  Dallas DS1511 timekeeping/watchdog chip.
1061
1062	  This driver can also be built as a module. If so, the module
1063	  will be called rtc-ds1511.
1064
1065config RTC_DRV_DS1553
1066	tristate "Maxim/Dallas DS1553"
1067	depends on HAS_IOMEM
1068	help
1069	  If you say yes here you get support for the
1070	  Maxim/Dallas DS1553 timekeeping chip.
1071
1072	  This driver can also be built as a module. If so, the module
1073	  will be called rtc-ds1553.
1074
1075config RTC_DRV_DS1685_FAMILY
1076	tristate "Dallas/Maxim DS1685 Family"
1077	depends on HAS_IOMEM
1078	help
1079	  If you say yes here you get support for the Dallas/Maxim DS1685
1080	  family of real time chips.  This family includes the DS1685/DS1687,
1081	  DS1689/DS1693, DS17285/DS17287, DS17485/DS17487, and
1082	  DS17885/DS17887 chips.
1083
1084	  This driver can also be built as a module. If so, the module
1085	  will be called rtc-ds1685.
1086
1087choice
1088	prompt "Subtype"
1089	depends on RTC_DRV_DS1685_FAMILY
1090	default RTC_DRV_DS1685
1091
1092config RTC_DRV_DS1685
1093	bool "DS1685/DS1687"
1094	help
1095	  This enables support for the Dallas/Maxim DS1685/DS1687 real time
1096	  clock chip.
1097
1098	  This chip is commonly found in SGI O2 (IP32) and SGI Octane (IP30)
1099	  systems, as well as EPPC-405-UC modules by electronic system design
1100	  GmbH.
1101
1102config RTC_DRV_DS1689
1103	bool "DS1689/DS1693"
1104	help
1105	  This enables support for the Dallas/Maxim DS1689/DS1693 real time
1106	  clock chip.
1107
1108	  This is an older RTC chip, supplanted by the DS1685/DS1687 above,
1109	  which supports a few minor features such as Vcc, Vbat, and Power
1110	  Cycle counters, plus a customer-specific, 8-byte ROM/Serial number.
1111
1112	  It also works for the even older DS1688/DS1691 RTC chips, which are
1113	  virtually the same and carry the same model number.  Both chips
1114	  have 114 bytes of user NVRAM.
1115
1116config RTC_DRV_DS17285
1117	bool "DS17285/DS17287"
1118	help
1119	  This enables support for the Dallas/Maxim DS17285/DS17287 real time
1120	  clock chip.
1121
1122	  This chip features 2kb of extended NV-SRAM.  It may possibly be
1123	  found in some SGI O2 systems (rare).
1124
1125config RTC_DRV_DS17485
1126	bool "DS17485/DS17487"
1127	help
1128	  This enables support for the Dallas/Maxim DS17485/DS17487 real time
1129	  clock chip.
1130
1131	  This chip features 4kb of extended NV-SRAM.
1132
1133config RTC_DRV_DS17885
1134	bool "DS17885/DS17887"
1135	help
1136	  This enables support for the Dallas/Maxim DS17885/DS17887 real time
1137	  clock chip.
1138
1139	  This chip features 8kb of extended NV-SRAM.
1140
1141endchoice
1142
1143config RTC_DRV_DS1742
1144	tristate "Maxim/Dallas DS1742/1743"
1145	depends on HAS_IOMEM
1146	help
1147	  If you say yes here you get support for the
1148	  Maxim/Dallas DS1742/1743 timekeeping chip.
1149
1150	  This driver can also be built as a module. If so, the module
1151	  will be called rtc-ds1742.
1152
1153config RTC_DRV_DS2404
1154	tristate "Maxim/Dallas DS2404"
1155	help
1156	  If you say yes here you get support for the
1157	  Dallas DS2404 RTC chip.
1158
1159	  This driver can also be built as a module. If so, the module
1160	  will be called rtc-ds2404.
1161
1162config RTC_DRV_DA9052
1163	tristate "Dialog DA9052/DA9053 RTC"
1164	depends on PMIC_DA9052
1165	help
1166	  Say y here to support the RTC driver for Dialog Semiconductor
1167	  DA9052-BC and DA9053-AA/Bx PMICs.
1168
1169config RTC_DRV_DA9055
1170	tristate "Dialog Semiconductor DA9055 RTC"
1171	depends on MFD_DA9055
1172	help
1173	  If you say yes here you will get support for the
1174	  RTC of the Dialog DA9055 PMIC.
1175
1176	  This driver can also be built as a module. If so, the module
1177	  will be called rtc-da9055
1178
1179config RTC_DRV_DA9063
1180	tristate "Dialog Semiconductor DA9063/DA9062 RTC"
1181	depends on MFD_DA9063 || MFD_DA9062
1182	help
1183	  If you say yes here you will get support for the RTC subsystem
1184	  for the Dialog Semiconductor PMIC chips DA9063 and DA9062.
1185
1186	  This driver can also be built as a module. If so, the module
1187	  will be called "rtc-da9063".
1188
1189config RTC_DRV_EFI
1190	tristate "EFI RTC"
1191	depends on EFI && !X86
1192	help
1193	  If you say yes here you will get support for the EFI
1194	  Real Time Clock.
1195
1196	  This driver can also be built as a module. If so, the module
1197	  will be called rtc-efi.
1198
1199config RTC_DRV_STK17TA8
1200	tristate "Simtek STK17TA8"
1201	depends on HAS_IOMEM
1202	help
1203	  If you say yes here you get support for the
1204	  Simtek STK17TA8 timekeeping chip.
1205
1206	  This driver can also be built as a module. If so, the module
1207	  will be called rtc-stk17ta8.
1208
1209config RTC_DRV_M48T86
1210	tristate "ST M48T86/Dallas DS12887"
1211	depends on HAS_IOMEM
1212	help
1213	  If you say Y here you will get support for the
1214	  ST M48T86 and Dallas DS12887 RTC chips.
1215
1216	  This driver can also be built as a module. If so, the module
1217	  will be called rtc-m48t86.
1218
1219config RTC_DRV_M48T35
1220	tristate "ST M48T35"
1221	depends on HAS_IOMEM
1222	help
1223	  If you say Y here you will get support for the
1224	  ST M48T35 RTC chip.
1225
1226	  This driver can also be built as a module, if so, the module
1227	  will be called "rtc-m48t35".
1228
1229config RTC_DRV_M48T59
1230	tristate "ST M48T59/M48T08/M48T02"
1231	depends on HAS_IOMEM
1232	help
1233	  If you say Y here you will get support for the
1234	  ST M48T59 RTC chip and compatible ST M48T08 and M48T02.
1235
1236	  These chips are usually found in Sun SPARC and UltraSPARC
1237	  workstations.
1238
1239	  This driver can also be built as a module, if so, the module
1240	  will be called "rtc-m48t59".
1241
1242config RTC_DRV_MSM6242
1243	tristate "Oki MSM6242"
1244	depends on HAS_IOMEM
1245	help
1246	  If you say yes here you get support for the Oki MSM6242
1247	  timekeeping chip. It is used in some Amiga models (e.g. A2000).
1248
1249	  This driver can also be built as a module. If so, the module
1250	  will be called rtc-msm6242.
1251
1252config RTC_DRV_BQ4802
1253	tristate "TI BQ4802"
1254	depends on HAS_IOMEM && HAS_IOPORT
1255	depends on SPARC || COMPILE_TEST
1256	help
1257	  If you say Y here you will get support for the TI
1258	  BQ4802 RTC chip.
1259
1260	  This driver can also be built as a module. If so, the module
1261	  will be called rtc-bq4802.
1262
1263config RTC_DRV_RP5C01
1264	tristate "Ricoh RP5C01"
1265	depends on HAS_IOMEM
1266	help
1267	  If you say yes here you get support for the Ricoh RP5C01
1268	  timekeeping chip. It is used in some Amiga models (e.g. A3000
1269	  and A4000).
1270
1271	  This driver can also be built as a module. If so, the module
1272	  will be called rtc-rp5c01.
1273
1274config RTC_DRV_GAMECUBE
1275	tristate "Nintendo GameCube, Wii and Wii U RTC"
1276	depends on GAMECUBE || WII || COMPILE_TEST
1277	select REGMAP
1278	help
1279	  If you say yes here you will get support for the RTC subsystem
1280	  of the Nintendo GameCube, Wii and Wii U.
1281
1282	  This driver can also be built as a module. If so, the module
1283	  will be called "rtc-gamecube".
1284
1285config RTC_DRV_WM831X
1286	tristate "Wolfson Microelectronics WM831x RTC"
1287	depends on MFD_WM831X
1288	help
1289	  If you say yes here you will get support for the RTC subsystem
1290	  of the Wolfson Microelectronics WM831X series PMICs.
1291
1292	  This driver can also be built as a module. If so, the module
1293	  will be called "rtc-wm831x".
1294
1295config RTC_DRV_WM8350
1296	tristate "Wolfson Microelectronics WM8350 RTC"
1297	depends on MFD_WM8350
1298	help
1299	  If you say yes here you will get support for the RTC subsystem
1300	  of the Wolfson Microelectronics WM8350.
1301
1302	  This driver can also be built as a module. If so, the module
1303	  will be called "rtc-wm8350".
1304
1305config RTC_DRV_SC27XX
1306	tristate "Spreadtrum SC27xx RTC"
1307	depends on MFD_SC27XX_PMIC || COMPILE_TEST
1308	help
1309	  If you say Y here you will get support for the RTC subsystem
1310	  of the Spreadtrum SC27xx series PMICs. The SC27xx series PMICs
1311	  includes the SC2720, SC2721, SC2723, SC2730 and SC2731 chips.
1312
1313	  This driver can also be built as a module. If so, the module
1314	  will be called rtc-sc27xx.
1315
1316config RTC_DRV_SPEAR
1317	tristate "SPEAR ST RTC"
1318	depends on PLAT_SPEAR || COMPILE_TEST
1319	default y
1320	help
1321	 If you say Y here you will get support for the RTC found on
1322	 spear
1323
1324config RTC_DRV_PCF50633
1325	depends on MFD_PCF50633
1326	tristate "NXP PCF50633 RTC"
1327	help
1328	  If you say yes here you get support for the RTC subsystem of the
1329	  NXP PCF50633 used in embedded systems.
1330
1331config RTC_DRV_AB8500
1332	tristate "ST-Ericsson AB8500 RTC"
1333	depends on AB8500_CORE
1334	select RTC_INTF_DEV
1335	select RTC_INTF_DEV_UIE_EMUL
1336	help
1337	  Select this to enable the ST-Ericsson AB8500 power management IC RTC
1338	  support. This chip contains a battery- and capacitor-backed RTC.
1339
1340config RTC_DRV_OPAL
1341	tristate "IBM OPAL RTC driver"
1342	depends on PPC_POWERNV
1343	default y
1344	help
1345	  If you say yes here you get support for the PowerNV platform RTC
1346	  driver based on OPAL interfaces.
1347
1348	  This driver can also be built as a module. If so, the module
1349	  will be called rtc-opal.
1350
1351config RTC_DRV_OPTEE
1352	tristate "OP-TEE based RTC driver"
1353	depends on OPTEE
1354	help
1355	  Select this to get support for OP-TEE based RTC control on SoCs where
1356	  RTC are not accessible to the normal world (Linux).
1357
1358	  This driver can also be built as a module. If so, the module
1359	  will be called rtc-optee.
1360
1361config RTC_DRV_ZYNQMP
1362	tristate "Xilinx Zynq Ultrascale+ MPSoC RTC"
1363	depends on OF && HAS_IOMEM
1364	help
1365	  If you say yes here you get support for the RTC controller found on
1366	  Xilinx Zynq Ultrascale+ MPSoC.
1367
1368config RTC_DRV_CROS_EC
1369	tristate "Chrome OS EC RTC driver"
1370	depends on CROS_EC
1371	help
1372	  If you say yes here you will get support for the
1373	  Chrome OS Embedded Controller's RTC.
1374
1375	  This driver can also be built as a module. If so, the module
1376	  will be called rtc-cros-ec.
1377
1378config RTC_DRV_NTXEC
1379	tristate "Netronix embedded controller RTC"
1380	depends on MFD_NTXEC
1381	help
1382	  Say yes here if you want to support the RTC functionality of the
1383	  embedded controller found in certain e-book readers designed by the
1384	  original design manufacturer Netronix.
1385
1386comment "on-CPU RTC drivers"
1387
1388config RTC_DRV_ASM9260
1389	tristate "Alphascale asm9260 RTC"
1390	depends on MACH_ASM9260 || COMPILE_TEST
1391	help
1392	  If you say yes here you get support for the RTC on the
1393	  Alphascale asm9260 SoC.
1394
1395	  This driver can also be built as a module. If so, the module
1396	  will be called rtc-asm9260.
1397
1398config RTC_DRV_DIGICOLOR
1399	tristate "Conexant Digicolor RTC"
1400	depends on ARCH_DIGICOLOR || COMPILE_TEST
1401	help
1402	  If you say yes here you get support for the RTC on Conexant
1403	  Digicolor platforms. This currently includes the CX92755 SoC.
1404
1405	  This driver can also be built as a module. If so, the module
1406	  will be called rtc-digicolor.
1407
1408config RTC_DRV_IMXDI
1409	tristate "Freescale IMX DryIce Real Time Clock"
1410	depends on ARCH_MXC || COMPILE_TEST
1411	depends on OF
1412	help
1413	   Support for Freescale IMX DryIce RTC
1414
1415	   This driver can also be built as a module, if so, the module
1416	   will be called "rtc-imxdi".
1417
1418config RTC_DRV_FSL_FTM_ALARM
1419	tristate "Freescale FlexTimer alarm timer"
1420	depends on ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
1421	help
1422	   For the FlexTimer in LS1012A, LS1021A, LS1028A, LS1043A, LS1046A,
1423	   LS1088A, LS208xA, we can use FTM as the wakeup source.
1424
1425	   Say y here to enable FTM alarm support. The FTM alarm provides
1426	   alarm functions for wakeup system from deep sleep.
1427
1428	   This driver can also be built as a module, if so, the module
1429	   will be called "rtc-fsl-ftm-alarm".
1430
1431config RTC_DRV_MESON
1432	tristate "Amlogic Meson RTC"
1433	depends on (ARM && ARCH_MESON) || COMPILE_TEST
1434	select REGMAP_MMIO
1435	help
1436	   Support for the RTC block on the Amlogic Meson6, Meson8, Meson8b
1437	   and Meson8m2 SoCs.
1438
1439	   This driver can also be built as a module, if so, the module
1440	   will be called "rtc-meson".
1441
1442config RTC_DRV_MESON_VRTC
1443	tristate "Amlogic Meson Virtual RTC"
1444	depends on ARCH_MESON || COMPILE_TEST
1445	default m if ARCH_MESON
1446	help
1447	  If you say yes here you will get support for the
1448	  Virtual RTC of Amlogic SoCs.
1449
1450	  This driver can also be built as a module. If so, the module
1451	  will be called rtc-meson-vrtc.
1452
1453config RTC_DRV_OMAP
1454	tristate "TI OMAP Real Time Clock"
1455	depends on ARCH_OMAP || ARCH_DAVINCI || COMPILE_TEST
1456	depends on OF
1457	depends on PINCTRL
1458	select GENERIC_PINCONF
1459	help
1460	  Say "yes" here to support the on chip real time clock
1461	  present on TI OMAP1, AM33xx, DA8xx/OMAP-L13x, AM43xx and DRA7xx.
1462
1463	  This driver can also be built as a module, if so, module
1464	  will be called rtc-omap.
1465
1466config RTC_DRV_S3C
1467	tristate "Samsung S3C series SoC RTC"
1468	depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || \
1469		   COMPILE_TEST
1470	help
1471	  RTC (Realtime Clock) driver for the clock inbuilt into the
1472	  Samsung S3C64XX series of SoCs. This can provide periodic
1473	  interrupt rates from 1Hz to 64Hz for user programs, and
1474	  wakeup from Alarm.
1475
1476	  This driver can also be build as a module. If so, the module
1477	  will be called rtc-s3c.
1478
1479config RTC_DRV_EP93XX
1480	tristate "Cirrus Logic EP93XX"
1481	depends on ARCH_EP93XX || COMPILE_TEST
1482	help
1483	  If you say yes here you get support for the
1484	  RTC embedded in the Cirrus Logic EP93XX processors.
1485
1486	  This driver can also be built as a module. If so, the module
1487	  will be called rtc-ep93xx.
1488
1489config RTC_DRV_SA1100
1490	tristate "SA11x0/PXA2xx/PXA910"
1491	depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
1492	help
1493	  If you say Y here you will get access to the real time clock
1494	  built into your SA11x0 or PXA2xx CPU.
1495
1496	  To compile this driver as a module, choose M here: the
1497	  module will be called rtc-sa1100.
1498
1499config RTC_DRV_SH
1500	tristate "SuperH On-Chip RTC"
1501	depends on SUPERH || ARCH_RENESAS
1502	help
1503	  Say Y here to enable support for the on-chip RTC found in
1504	  most SuperH processors. This RTC is also found in RZ/A SoCs.
1505
1506	  To compile this driver as a module, choose M here: the
1507	  module will be called rtc-sh.
1508
1509config RTC_DRV_SUNPLUS
1510	tristate "Sunplus SP7021 RTC"
1511	depends on SOC_SP7021
1512	help
1513	  Say 'yes' to get support for the real-time clock present in
1514	  Sunplus SP7021 - a SoC for industrial applications. It provides
1515	  RTC status check, timer/alarm functionalities, user data
1516	  reservation with the battery over 2.5V, RTC power status check
1517	  and battery charge.
1518
1519	  This driver can also be built as a module. If so, the module
1520	  will be called rtc-sunplus.
1521
1522config RTC_DRV_PL030
1523	tristate "ARM AMBA PL030 RTC"
1524	depends on ARM_AMBA
1525	help
1526	  If you say Y here you will get access to ARM AMBA
1527	  PrimeCell PL030 RTC found on certain ARM SOCs.
1528
1529	  To compile this driver as a module, choose M here: the
1530	  module will be called rtc-pl030.
1531
1532config RTC_DRV_PL031
1533	tristate "ARM AMBA PL031 RTC"
1534	depends on ARM_AMBA
1535	help
1536	  If you say Y here you will get access to ARM AMBA
1537	  PrimeCell PL031 RTC found on certain ARM SOCs.
1538
1539	  To compile this driver as a module, choose M here: the
1540	  module will be called rtc-pl031.
1541
1542config RTC_DRV_AT91RM9200
1543	tristate "AT91RM9200 or some AT91SAM9 RTC"
1544	depends on ARCH_AT91 || COMPILE_TEST
1545	depends on OF
1546	help
1547	  Driver for the internal RTC (Realtime Clock) module found on
1548	  Atmel AT91RM9200's and some  AT91SAM9 chips. On AT91SAM9 chips
1549	  this is powered by the backup power supply.
1550
1551config RTC_DRV_AT91SAM9
1552	tristate "AT91SAM9 RTT as RTC"
1553	depends on ARCH_AT91 || COMPILE_TEST
1554	depends on OF && HAS_IOMEM
1555	select MFD_SYSCON
1556	help
1557	  Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
1558	  can be used as an RTC thanks to the backup power supply (e.g. a
1559	  small coin cell battery) which keeps this block and the GPBR
1560	  (General Purpose Backup Registers) block powered when the device
1561	  is shutdown.
1562	  Some AT91SAM9 SoCs provide a real RTC block, on those ones you'd
1563	  probably want to use the real RTC block instead of the "RTT as an
1564	  RTC" driver.
1565
1566config RTC_DRV_AU1XXX
1567	tristate "Au1xxx Counter0 RTC support"
1568	depends on MIPS_ALCHEMY
1569	help
1570	  This is a driver for the Au1xxx on-chip Counter0 (Time-Of-Year
1571	  counter) to be used as a RTC.
1572
1573	  This driver can also be built as a module. If so, the module
1574	  will be called rtc-au1xxx.
1575
1576config RTC_DRV_RS5C313
1577	tristate "Ricoh RS5C313"
1578	depends on SH_LANDISK
1579	help
1580	  If you say yes here you get support for the Ricoh RS5C313 RTC chips.
1581
1582config RTC_DRV_RZN1
1583	tristate "Renesas RZ/N1 RTC"
1584	depends on ARCH_RZN1 || COMPILE_TEST
1585	depends on OF && HAS_IOMEM
1586	help
1587	  If you say yes here you get support for the Renesas RZ/N1 RTC.
1588
1589config RTC_DRV_GENERIC
1590	tristate "Generic RTC support"
1591	# Please consider writing a new RTC driver instead of using the generic
1592	# RTC abstraction
1593	depends on PARISC || M68K || PPC || SUPERH || COMPILE_TEST
1594	help
1595	  Say Y or M here to enable RTC support on systems using the generic
1596	  RTC abstraction. If you do not know what you are doing, you should
1597	  just say Y.
1598
1599config RTC_DRV_PXA
1600	tristate "PXA27x/PXA3xx"
1601	depends on ARCH_PXA
1602	select RTC_DRV_SA1100
1603	help
1604	 If you say Y here you will get access to the real time clock
1605	 built into your PXA27x or PXA3xx CPU. This RTC is actually 2 RTCs
1606	 consisting of an SA1100 compatible RTC and the extended PXA RTC.
1607
1608	 This RTC driver uses PXA RTC registers available since pxa27x
1609	 series (RDxR, RYxR) instead of legacy RCNR, RTAR.
1610
1611config RTC_DRV_VT8500
1612	tristate "VIA/WonderMedia 85xx SoC RTC"
1613	depends on ARCH_VT8500 || COMPILE_TEST
1614	help
1615	  If you say Y here you will get access to the real time clock
1616	  built into your VIA VT8500 SoC or its relatives.
1617
1618
1619config RTC_DRV_SUN4V
1620	bool "SUN4V Hypervisor RTC"
1621	depends on SPARC64
1622	help
1623	  If you say Y here you will get support for the Hypervisor
1624	  based RTC on SUN4V systems.
1625
1626config RTC_DRV_SUN6I
1627	bool "Allwinner A31 RTC"
1628	default MACH_SUN6I || MACH_SUN8I
1629	depends on COMMON_CLK
1630	depends on ARCH_SUNXI || COMPILE_TEST
1631	help
1632	  If you say Y here you will get support for the RTC found in
1633	  some Allwinner SoCs like the A31 or the A64.
1634
1635config RTC_DRV_SUNXI
1636	tristate "Allwinner sun4i/sun7i RTC"
1637	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
1638	help
1639	  If you say Y here you will get support for the RTC found on
1640	  Allwinner A10/A20.
1641
1642config RTC_DRV_STARFIRE
1643	bool "Starfire RTC"
1644	depends on SPARC64
1645	help
1646	  If you say Y here you will get support for the RTC found on
1647	  Starfire systems.
1648
1649config RTC_DRV_MV
1650	tristate "Marvell SoC RTC"
1651	depends on ARCH_DOVE || ARCH_MVEBU || COMPILE_TEST
1652	help
1653	  If you say yes here you will get support for the in-chip RTC
1654	  that can be found in some of Marvell's SoC devices, such as
1655	  the Kirkwood 88F6281 and 88F6192.
1656
1657	  This driver can also be built as a module. If so, the module
1658	  will be called rtc-mv.
1659
1660config RTC_DRV_ARMADA38X
1661	tristate "Armada 38x Marvell SoC RTC"
1662	depends on ARCH_MVEBU || COMPILE_TEST
1663	depends on OF
1664	help
1665	  If you say yes here you will get support for the in-chip RTC
1666	  that can be found in the Armada 38x Marvell's SoC device
1667
1668	  This driver can also be built as a module. If so, the module
1669	  will be called armada38x-rtc.
1670
1671config RTC_DRV_CADENCE
1672	tristate "Cadence RTC driver"
1673	depends on OF && HAS_IOMEM
1674	help
1675	  If you say Y here you will get access to Cadence RTC IP
1676	  found on certain SOCs.
1677
1678	  To compile this driver as a module, choose M here: the
1679	  module will be called rtc-cadence.
1680
1681config RTC_DRV_FTRTC010
1682	tristate "Faraday Technology FTRTC010 RTC"
1683	depends on HAS_IOMEM
1684	default ARCH_GEMINI
1685	help
1686	  If you say Y here you will get support for the
1687	  Faraday Technolog FTRTC010 found on e.g. Gemini SoC's.
1688
1689	  This driver can also be built as a module. If so, the module
1690	  will be called rtc-ftrtc010.
1691
1692config RTC_DRV_PS3
1693	tristate "PS3 RTC"
1694	depends on PPC_PS3
1695	help
1696	  If you say yes here you will get support for the RTC on PS3.
1697
1698	  This driver can also be built as a module. If so, the module
1699	  will be called rtc-ps3.
1700
1701config RTC_DRV_STMP
1702	tristate "Freescale STMP3xxx/i.MX23/i.MX28 RTC"
1703	depends on ARCH_MXS || COMPILE_TEST
1704	select STMP_DEVICE
1705	help
1706	  If you say yes here you will get support for the onboard
1707	  STMP3xxx/i.MX23/i.MX28 RTC.
1708
1709	  This driver can also be built as a module. If so, the module
1710	  will be called rtc-stmp3xxx.
1711
1712config RTC_DRV_PCAP
1713	tristate "PCAP RTC"
1714	depends on EZX_PCAP
1715	help
1716	  If you say Y here you will get support for the RTC found on
1717	  the PCAP2 ASIC used on some Motorola phones.
1718
1719config RTC_DRV_MC13XXX
1720	depends on MFD_MC13XXX
1721	tristate "Freescale MC13xxx RTC"
1722	help
1723	  This enables support for the RTCs found on Freescale's PMICs
1724	  MC13783 and MC13892.
1725
1726config RTC_DRV_MPC5121
1727	tristate "Freescale MPC5121 built-in RTC"
1728	depends on PPC_MPC512x || PPC_MPC52xx
1729	help
1730	  If you say yes here you will get support for the
1731	  built-in RTC on MPC5121 or on MPC5200.
1732
1733	  This driver can also be built as a module. If so, the module
1734	  will be called rtc-mpc5121.
1735
1736config RTC_DRV_JZ4740
1737	tristate "Ingenic JZ4740 SoC"
1738	depends on MIPS || COMPILE_TEST
1739	depends on OF && COMMON_CLK
1740	help
1741	  If you say yes here you get support for the Ingenic JZ47xx SoCs RTC
1742	  controllers.
1743
1744	  This driver can also be built as a module. If so, the module
1745	  will be called rtc-jz4740.
1746
1747config RTC_DRV_LOONGSON
1748	tristate "Loongson On-chip RTC"
1749	depends on MACH_LOONGSON32 || MACH_LOONGSON64 || COMPILE_TEST
1750	select REGMAP_MMIO
1751	help
1752	  This is a driver for the Loongson on-chip Counter0 (Time-Of-Year
1753	  counter) to be used as a RTC.
1754	  It can be found on Loongson-1 series cpu, Loongson-2K series cpu
1755	  and Loongson LS7A bridge chips.
1756
1757	  This driver can also be built as a module. If so, the module
1758	  will be called rtc-loongson.
1759
1760config RTC_DRV_LPC24XX
1761	tristate "NXP RTC for LPC178x/18xx/408x/43xx"
1762	depends on ARCH_LPC18XX || COMPILE_TEST
1763	depends on OF && HAS_IOMEM
1764	depends on COMMON_CLK
1765	help
1766	  This enables support for the NXP RTC found which can be found on
1767	  NXP LPC178x/18xx/408x/43xx devices.
1768
1769	  If you have one of the devices above enable this driver to use
1770	  the hardware RTC. This driver can also be built as a module. If
1771	  so, the module will be called rtc-lpc24xx.
1772
1773config RTC_DRV_LPC32XX
1774	depends on ARCH_LPC32XX || COMPILE_TEST
1775	tristate "NXP LPC32XX RTC"
1776	help
1777	  This enables support for the NXP RTC in the LPC32XX
1778
1779	  This driver can also be built as a module. If so, the module
1780	  will be called rtc-lpc32xx.
1781
1782config RTC_DRV_PM8XXX
1783	tristate "Qualcomm PMIC8XXX RTC"
1784	depends on MFD_PM8XXX || MFD_SPMI_PMIC || COMPILE_TEST
1785	help
1786	  If you say yes here you get support for the
1787	  Qualcomm PMIC8XXX RTC.
1788
1789	  To compile this driver as a module, choose M here: the
1790	  module will be called rtc-pm8xxx.
1791
1792config RTC_DRV_TEGRA
1793	tristate "NVIDIA Tegra Internal RTC driver"
1794	depends on ARCH_TEGRA || COMPILE_TEST
1795	help
1796	  If you say yes here you get support for the
1797	  Tegra 200 series internal RTC module.
1798
1799	  This drive can also be built as a module. If so, the module
1800	  will be called rtc-tegra.
1801
1802config RTC_DRV_MXC
1803	tristate "Freescale MXC Real Time Clock"
1804	depends on ARCH_MXC || COMPILE_TEST
1805	depends on HAS_IOMEM
1806	depends on OF
1807	help
1808	   If you say yes here you get support for the Freescale MXC
1809	   RTC module.
1810
1811	   This driver can also be built as a module, if so, the module
1812	   will be called "rtc-mxc".
1813
1814config RTC_DRV_MXC_V2
1815	tristate "Freescale MXC Real Time Clock for i.MX53"
1816	depends on ARCH_MXC || COMPILE_TEST
1817	depends on HAS_IOMEM
1818	depends on OF
1819	help
1820	   If you say yes here you get support for the Freescale MXC
1821	   SRTC module in i.MX53 processor.
1822
1823	   This driver can also be built as a module, if so, the module
1824	   will be called "rtc-mxc_v2".
1825
1826config RTC_DRV_SNVS
1827	tristate "Freescale SNVS RTC support"
1828	select REGMAP_MMIO
1829	depends on ARCH_MXC || COMPILE_TEST
1830	depends on HAS_IOMEM
1831	depends on OF
1832	help
1833	   If you say yes here you get support for the Freescale SNVS
1834	   Low Power (LP) RTC module.
1835
1836	   This driver can also be built as a module, if so, the module
1837	   will be called "rtc-snvs".
1838
1839config RTC_DRV_BBNSM
1840	tristate "NXP BBNSM RTC support"
1841	select REGMAP_MMIO
1842	depends on ARCH_MXC || COMPILE_TEST
1843	depends on HAS_IOMEM
1844	depends on OF
1845	help
1846	   If you say yes here you get support for the NXP BBNSM RTC module.
1847
1848	   This driver can also be built as a module, if so, the module
1849	   will be called "rtc-bbnsm".
1850
1851config RTC_DRV_IMX_BBM_SCMI
1852	depends on IMX_SCMI_BBM_EXT || COMPILE_TEST
1853	default y if ARCH_MXC
1854	tristate "NXP i.MX BBM SCMI RTC support"
1855	help
1856	  If you say yes here you get support for the NXP i.MX BBSM SCMI
1857	  RTC module.
1858
1859	  To compile this driver as a module, choose M here: the
1860	  module will be called rtc-imx-sm-bbm.
1861
1862config RTC_DRV_IMX_SC
1863	depends on IMX_SCU
1864	depends on HAVE_ARM_SMCCC
1865	tristate "NXP i.MX System Controller RTC support"
1866	help
1867	   If you say yes here you get support for the NXP i.MX System
1868	   Controller RTC module.
1869
1870config RTC_DRV_ST_LPC
1871	tristate "STMicroelectronics LPC RTC"
1872	depends on ARCH_STI
1873	depends on OF
1874	help
1875	  Say Y here to include STMicroelectronics Low Power Controller
1876	  (LPC) based RTC support.
1877
1878	  To compile this driver as a module, choose M here: the
1879	  module will be called rtc-st-lpc.
1880
1881config RTC_DRV_MOXART
1882	tristate "MOXA ART RTC"
1883	depends on ARCH_MOXART || COMPILE_TEST
1884	help
1885	   If you say yes here you get support for the MOXA ART
1886	   RTC module.
1887
1888	   This driver can also be built as a module. If so, the module
1889	   will be called rtc-moxart
1890
1891config RTC_DRV_MT2712
1892	tristate "MediaTek MT2712 SoC based RTC"
1893	depends on ARCH_MEDIATEK || COMPILE_TEST
1894	help
1895	  This enables support for the real time clock built in the MediaTek
1896	  SoCs for MT2712.
1897
1898	  This drive can also be built as a module. If so, the module
1899	  will be called rtc-mt2712.
1900
1901config RTC_DRV_MT6397
1902	tristate "MediaTek PMIC based RTC"
1903	depends on MFD_MT6397 || COMPILE_TEST
1904	select IRQ_DOMAIN
1905	help
1906	  This selects the MediaTek(R) RTC driver. RTC is part of MediaTek
1907	  MT6397 PMIC. You should enable MT6397 PMIC MFD before select
1908	  MediaTek(R) RTC driver.
1909
1910	  If you want to use MediaTek(R) RTC interface, select Y or M here.
1911
1912config RTC_DRV_MT7622
1913	tristate "MediaTek SoC based RTC"
1914	depends on ARCH_MEDIATEK || COMPILE_TEST
1915	help
1916	  This enables support for the real time clock built in the MediaTek
1917	  SoCs.
1918
1919	  This drive can also be built as a module. If so, the module
1920	  will be called rtc-mt7622.
1921
1922config RTC_DRV_XGENE
1923	tristate "APM X-Gene RTC"
1924	depends on HAS_IOMEM
1925	depends on ARCH_XGENE || COMPILE_TEST
1926	help
1927	  If you say yes here you get support for the APM X-Gene SoC real time
1928	  clock.
1929
1930	  This driver can also be built as a module, if so, the module
1931	  will be called "rtc-xgene".
1932
1933config RTC_DRV_PIC32
1934	tristate "Microchip PIC32 RTC"
1935	depends on MACH_PIC32
1936	default y
1937	help
1938	   If you say yes here you get support for the PIC32 RTC module.
1939
1940	   This driver can also be built as a module. If so, the module
1941	   will be called rtc-pic32
1942
1943config RTC_DRV_R7301
1944	tristate "EPSON TOYOCOM RTC-7301SF/DG"
1945	select REGMAP_MMIO
1946	depends on OF && HAS_IOMEM
1947	help
1948	   If you say yes here you get support for the EPSON TOYOCOM
1949	   RTC-7301SF/DG chips.
1950
1951	   This driver can also be built as a module. If so, the module
1952	   will be called rtc-r7301.
1953
1954config RTC_DRV_STM32
1955	tristate "STM32 RTC"
1956	select REGMAP_MMIO
1957	depends on ARCH_STM32 || COMPILE_TEST
1958	depends on OF
1959	depends on PINCTRL
1960	select PINMUX
1961	select PINCONF
1962	select GENERIC_PINCONF
1963	depends on COMMON_CLK
1964	help
1965	   If you say yes here you get support for the STM32 On-Chip
1966	   Real Time Clock.
1967
1968	   This driver can also be built as a module, if so, the module
1969	   will be called "rtc-stm32".
1970
1971config RTC_DRV_CPCAP
1972	depends on MFD_CPCAP
1973	tristate "Motorola CPCAP RTC"
1974	help
1975	   Say y here for CPCAP rtc found on some Motorola phones
1976	   and tablets such as Droid 4.
1977
1978config RTC_DRV_RTD119X
1979	bool "Realtek RTD129x RTC"
1980	depends on ARCH_REALTEK || COMPILE_TEST
1981	default ARCH_REALTEK
1982	help
1983	  If you say yes here, you get support for the RTD1295 SoC
1984	  Real Time Clock.
1985
1986config RTC_DRV_ASPEED
1987	tristate "ASPEED RTC"
1988	depends on OF
1989	depends on ARCH_ASPEED || COMPILE_TEST
1990	help
1991	  If you say yes here you get support for the ASPEED BMC SoC real time
1992	  clocks.
1993
1994	  This driver can also be built as a module, if so, the module
1995	  will be called "rtc-aspeed".
1996
1997config RTC_DRV_TI_K3
1998	tristate "TI K3 RTC"
1999	depends on ARCH_K3 || COMPILE_TEST
2000	select REGMAP_MMIO
2001	help
2002	  If you say yes here you get support for the Texas Instruments's
2003	  Real Time Clock for K3 architecture.
2004
2005	  This driver can also be built as a module, if so, the module
2006	  will be called "rtc-ti-k3".
2007
2008config RTC_DRV_MA35D1
2009	tristate "Nuvoton MA35D1 RTC"
2010	depends on ARCH_MA35 || COMPILE_TEST
2011	select REGMAP_MMIO
2012	help
2013	   If you say yes here you get support for the Nuvoton MA35D1
2014	   On-Chip Real Time Clock.
2015
2016	   This driver can also be built as a module, if so, the module
2017	   will be called "rtc-ma35d1".
2018
2019config RTC_DRV_RENESAS_RTCA3
2020	tristate "Renesas RTCA-3 RTC"
2021	depends on ARCH_RENESAS
2022	help
2023	  If you say yes here you get support for the Renesas RTCA-3 RTC
2024	  available on the Renesas RZ/G3S SoC.
2025
2026	  This driver can also be built as a module, if so, the module
2027	  will be called "rtc-rtca3".
2028
2029comment "HID Sensor RTC drivers"
2030
2031config RTC_DRV_HID_SENSOR_TIME
2032	tristate "HID Sensor Time"
2033	depends on USB_HID
2034	depends on HID_SENSOR_HUB && IIO
2035	select HID_SENSOR_IIO_COMMON
2036	help
2037	  Say yes here to build support for the HID Sensors of type Time.
2038	  This drivers makes such sensors available as RTCs.
2039
2040	  If this driver is compiled as a module, it will be named
2041	  rtc-hid-sensor-time.
2042
2043config RTC_DRV_GOLDFISH
2044	tristate "Goldfish Real Time Clock"
2045	depends on HAS_IOMEM
2046	help
2047	  Say yes to enable RTC driver for the Goldfish based virtual platform.
2048
2049	  Goldfish is a code name for the virtual platform developed by Google
2050	  for Android emulation.
2051
2052config RTC_DRV_WILCO_EC
2053	tristate "Wilco EC RTC"
2054	depends on WILCO_EC
2055	default m
2056	help
2057	  If you say yes here, you get read/write support for the Real Time
2058	  Clock on the Wilco Embedded Controller (Wilco is a kind of Chromebook)
2059
2060	  This can also be built as a module. If so, the module will
2061	  be named "rtc_wilco_ec".
2062
2063config RTC_DRV_MSC313
2064	tristate "MStar MSC313 RTC"
2065        depends on ARCH_MSTARV7 || COMPILE_TEST
2066	help
2067	  If you say yes here you get support for the Mstar MSC313e On-Chip
2068	  Real Time Clock.
2069
2070	  This driver can also be built as a module, if so, the module
2071	  will be called "rtc-msc313".
2072
2073config RTC_DRV_POLARFIRE_SOC
2074	tristate "Microchip PolarFire SoC built-in RTC"
2075	depends on ARCH_MICROCHIP_POLARFIRE
2076	help
2077	  If you say yes here you will get support for the
2078	  built-in RTC on Polarfire SoC.
2079
2080	  This driver can also be built as a module, if so, the module
2081	  will be called "rtc-mpfs".
2082
2083config RTC_DRV_SSD202D
2084	tristate "SigmaStar SSD202D RTC"
2085	depends on ARCH_MSTARV7 || COMPILE_TEST
2086	default ARCH_MSTARV7
2087	help
2088	  If you say yes here you get support for the SigmaStar SSD202D On-Chip
2089	  Real Time Clock.
2090
2091	  This driver can also be built as a module, if so, the module
2092	  will be called "rtc-ssd20xd".
2093
2094config RTC_DRV_AMLOGIC_A4
2095	tristate "Amlogic RTC"
2096	depends on ARCH_MESON || COMPILE_TEST
2097	select REGMAP_MMIO
2098	default y
2099	help
2100	  If you say yes here you get support for the RTC block on the
2101	  Amlogic A113L2(A4) and A113X2(A5) SoCs.
2102
2103	  This driver can also be built as a module. If so, the module
2104	  will be called "rtc-amlogic-a4".
2105
2106endif # RTC_CLASS