Loading...
1# SPDX-License-Identifier: GPL-2.0
2
3config USB_CHIPIDEA
4 tristate "ChipIdea Highspeed Dual Role Controller"
5 depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
6 select EXTCON
7 select RESET_CONTROLLER
8 select USB_ULPI_BUS
9 select USB_ROLE_SWITCH
10 select USB_TEGRA_PHY if ARCH_TEGRA
11 help
12 Say Y here if your system has a dual role high speed USB
13 controller based on ChipIdea silicon IP. It supports:
14 Dual-role switch (ID, OTG FSM, sysfs), Host-only, and
15 Peripheral-only.
16
17 When compiled dynamically, the module will be called ci_hdrc.ko.
18
19if USB_CHIPIDEA
20
21config USB_CHIPIDEA_UDC
22 bool "ChipIdea device controller"
23 depends on USB_GADGET
24 help
25 Say Y here to enable device controller functionality of the
26 ChipIdea driver.
27
28config USB_CHIPIDEA_HOST
29 bool "ChipIdea host controller"
30 depends on USB_EHCI_HCD
31 select USB_EHCI_ROOT_HUB_TT
32 help
33 Say Y here to enable host controller functionality of the
34 ChipIdea driver.
35
36config USB_CHIPIDEA_PCI
37 tristate "Enable PCI glue driver" if EXPERT
38 depends on USB_PCI
39 depends on NOP_USB_XCEIV
40 default USB_CHIPIDEA
41
42config USB_CHIPIDEA_MSM
43 tristate "Enable MSM hsusb glue driver" if EXPERT
44 default USB_CHIPIDEA
45
46config USB_CHIPIDEA_NPCM
47 tristate "Enable NPCM hsusb glue driver" if EXPERT
48 default USB_CHIPIDEA
49
50config USB_CHIPIDEA_IMX
51 tristate "Enable i.MX USB glue driver" if EXPERT
52 depends on OF
53 default USB_CHIPIDEA
54
55config USB_CHIPIDEA_GENERIC
56 tristate "Enable generic USB2 glue driver" if EXPERT
57 default USB_CHIPIDEA
58
59config USB_CHIPIDEA_TEGRA
60 tristate "Enable Tegra USB glue driver" if EXPERT
61 depends on OF
62 default USB_CHIPIDEA
63
64endif
1# SPDX-License-Identifier: GPL-2.0
2
3config USB_CHIPIDEA
4 tristate "ChipIdea Highspeed Dual Role Controller"
5 depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
6 select EXTCON
7 select RESET_CONTROLLER
8 select USB_ULPI_BUS
9 select USB_ROLE_SWITCH
10 select USB_TEGRA_PHY if ARCH_TEGRA
11 help
12 Say Y here if your system has a dual role high speed USB
13 controller based on ChipIdea silicon IP. It supports:
14 Dual-role switch (ID, OTG FSM, sysfs), Host-only, and
15 Peripheral-only.
16
17 When compiled dynamically, the module will be called ci_hdrc.ko.
18
19if USB_CHIPIDEA
20
21config USB_CHIPIDEA_UDC
22 bool "ChipIdea device controller"
23 depends on USB_GADGET
24 help
25 Say Y here to enable device controller functionality of the
26 ChipIdea driver.
27
28config USB_CHIPIDEA_HOST
29 bool "ChipIdea host controller"
30 depends on USB_EHCI_HCD
31 select USB_EHCI_ROOT_HUB_TT
32 help
33 Say Y here to enable host controller functionality of the
34 ChipIdea driver.
35
36config USB_CHIPIDEA_PCI
37 tristate "Enable PCI glue driver" if EXPERT
38 depends on USB_PCI
39 depends on NOP_USB_XCEIV
40 default USB_CHIPIDEA
41
42config USB_CHIPIDEA_MSM
43 tristate "Enable MSM hsusb glue driver" if EXPERT
44 default USB_CHIPIDEA
45
46config USB_CHIPIDEA_NPCM
47 tristate "Enable NPCM hsusb glue driver" if EXPERT
48 default USB_CHIPIDEA
49
50config USB_CHIPIDEA_IMX
51 tristate "Enable i.MX USB glue driver" if EXPERT
52 depends on OF
53 default USB_CHIPIDEA
54
55config USB_CHIPIDEA_GENERIC
56 tristate "Enable generic USB2 glue driver" if EXPERT
57 default USB_CHIPIDEA
58
59config USB_CHIPIDEA_TEGRA
60 tristate "Enable Tegra USB glue driver" if EXPERT
61 depends on OF
62 default USB_CHIPIDEA
63
64endif