Linux Audio

Check our new training course

Loading...
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Dove thermal sensor driver
  4 *
  5 * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
  6 */
  7#include <linux/device.h>
  8#include <linux/err.h>
  9#include <linux/io.h>
 10#include <linux/kernel.h>
 11#include <linux/of.h>
 12#include <linux/module.h>
 13#include <linux/platform_device.h>
 14#include <linux/thermal.h>
 15
 16#define DOVE_THERMAL_TEMP_OFFSET	1
 17#define DOVE_THERMAL_TEMP_MASK		0x1FF
 18
 19/* Dove Thermal Manager Control and Status Register */
 20#define PMU_TM_DISABLE_OFFS		0
 21#define PMU_TM_DISABLE_MASK		(0x1 << PMU_TM_DISABLE_OFFS)
 22
 23/* Dove Theraml Diode Control 0 Register */
 24#define PMU_TDC0_SW_RST_MASK		(0x1 << 1)
 25#define PMU_TDC0_SEL_VCAL_OFFS		5
 26#define PMU_TDC0_SEL_VCAL_MASK		(0x3 << PMU_TDC0_SEL_VCAL_OFFS)
 27#define PMU_TDC0_REF_CAL_CNT_OFFS	11
 28#define PMU_TDC0_REF_CAL_CNT_MASK	(0x1FF << PMU_TDC0_REF_CAL_CNT_OFFS)
 29#define PMU_TDC0_AVG_NUM_OFFS		25
 30#define PMU_TDC0_AVG_NUM_MASK		(0x7 << PMU_TDC0_AVG_NUM_OFFS)
 31
 32/* Dove Thermal Diode Control 1 Register */
 33#define PMU_TEMP_DIOD_CTRL1_REG		0x04
 34#define PMU_TDC1_TEMP_VALID_MASK	(0x1 << 10)
 35
 36/* Dove Thermal Sensor Dev Structure */
 37struct dove_thermal_priv {
 38	void __iomem *sensor;
 39	void __iomem *control;
 40};
 41
 42static int dove_init_sensor(const struct dove_thermal_priv *priv)
 43{
 44	u32 reg;
 45	u32 i;
 46
 47	/* Configure the Diode Control Register #0 */
 48	reg = readl_relaxed(priv->control);
 49
 50	/* Use average of 2 */
 51	reg &= ~PMU_TDC0_AVG_NUM_MASK;
 52	reg |= (0x1 << PMU_TDC0_AVG_NUM_OFFS);
 53
 54	/* Reference calibration value */
 55	reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
 56	reg |= (0x0F1 << PMU_TDC0_REF_CAL_CNT_OFFS);
 57
 58	/* Set the high level reference for calibration */
 59	reg &= ~PMU_TDC0_SEL_VCAL_MASK;
 60	reg |= (0x2 << PMU_TDC0_SEL_VCAL_OFFS);
 61	writel(reg, priv->control);
 62
 63	/* Reset the sensor */
 64	reg = readl_relaxed(priv->control);
 65	writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
 66	writel(reg, priv->control);
 67
 68	/* Enable the sensor */
 69	reg = readl_relaxed(priv->sensor);
 70	reg &= ~PMU_TM_DISABLE_MASK;
 71	writel(reg, priv->sensor);
 72
 73	/* Poll the sensor for the first reading */
 74	for (i = 0; i < 1000000; i++) {
 75		reg = readl_relaxed(priv->sensor);
 76		if (reg & DOVE_THERMAL_TEMP_MASK)
 77			break;
 78	}
 79
 80	if (i == 1000000)
 81		return -EIO;
 82
 83	return 0;
 84}
 85
 86static int dove_get_temp(struct thermal_zone_device *thermal,
 87			  int *temp)
 88{
 89	unsigned long reg;
 90	struct dove_thermal_priv *priv = thermal_zone_device_priv(thermal);
 91
 92	/* Valid check */
 93	reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG);
 94	if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0)
 95		return -EIO;
 96
 97	/*
 98	 * Calculate temperature. According to Marvell internal
 99	 * documentation the formula for this is:
100	 * Celsius = (322-reg)/1.3625
101	 */
102	reg = readl_relaxed(priv->sensor);
103	reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK;
104	*temp = ((3220000000UL - (10000000UL * reg)) / 13625);
105
106	return 0;
107}
108
109static struct thermal_zone_device_ops ops = {
110	.get_temp = dove_get_temp,
111};
112
113static const struct of_device_id dove_thermal_id_table[] = {
114	{ .compatible = "marvell,dove-thermal" },
115	{}
116};
117
118static int dove_thermal_probe(struct platform_device *pdev)
119{
120	struct thermal_zone_device *thermal = NULL;
121	struct dove_thermal_priv *priv;
122	int ret;
123
124	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
125	if (!priv)
126		return -ENOMEM;
127
128	priv->sensor = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
129	if (IS_ERR(priv->sensor))
130		return PTR_ERR(priv->sensor);
131
132	priv->control = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
133	if (IS_ERR(priv->control))
134		return PTR_ERR(priv->control);
135
136	ret = dove_init_sensor(priv);
137	if (ret) {
138		dev_err(&pdev->dev, "Failed to initialize sensor\n");
139		return ret;
140	}
141
142	thermal = thermal_tripless_zone_device_register("dove_thermal", priv,
143							&ops, NULL);
144	if (IS_ERR(thermal)) {
145		dev_err(&pdev->dev,
146			"Failed to register thermal zone device\n");
147		return PTR_ERR(thermal);
148	}
149
150	ret = thermal_zone_device_enable(thermal);
151	if (ret) {
152		thermal_zone_device_unregister(thermal);
153		return ret;
154	}
155
156	platform_set_drvdata(pdev, thermal);
157
158	return 0;
159}
160
161static void dove_thermal_exit(struct platform_device *pdev)
162{
163	struct thermal_zone_device *dove_thermal =
164		platform_get_drvdata(pdev);
165
166	thermal_zone_device_unregister(dove_thermal);
167}
168
169MODULE_DEVICE_TABLE(of, dove_thermal_id_table);
170
171static struct platform_driver dove_thermal_driver = {
172	.probe = dove_thermal_probe,
173	.remove = dove_thermal_exit,
174	.driver = {
175		.name = "dove_thermal",
176		.of_match_table = dove_thermal_id_table,
177	},
178};
179
180module_platform_driver(dove_thermal_driver);
181
182MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
183MODULE_DESCRIPTION("Dove thermal driver");
184MODULE_LICENSE("GPL");
v6.8
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Dove thermal sensor driver
  4 *
  5 * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
  6 */
  7#include <linux/device.h>
  8#include <linux/err.h>
  9#include <linux/io.h>
 10#include <linux/kernel.h>
 11#include <linux/of.h>
 12#include <linux/module.h>
 13#include <linux/platform_device.h>
 14#include <linux/thermal.h>
 15
 16#define DOVE_THERMAL_TEMP_OFFSET	1
 17#define DOVE_THERMAL_TEMP_MASK		0x1FF
 18
 19/* Dove Thermal Manager Control and Status Register */
 20#define PMU_TM_DISABLE_OFFS		0
 21#define PMU_TM_DISABLE_MASK		(0x1 << PMU_TM_DISABLE_OFFS)
 22
 23/* Dove Theraml Diode Control 0 Register */
 24#define PMU_TDC0_SW_RST_MASK		(0x1 << 1)
 25#define PMU_TDC0_SEL_VCAL_OFFS		5
 26#define PMU_TDC0_SEL_VCAL_MASK		(0x3 << PMU_TDC0_SEL_VCAL_OFFS)
 27#define PMU_TDC0_REF_CAL_CNT_OFFS	11
 28#define PMU_TDC0_REF_CAL_CNT_MASK	(0x1FF << PMU_TDC0_REF_CAL_CNT_OFFS)
 29#define PMU_TDC0_AVG_NUM_OFFS		25
 30#define PMU_TDC0_AVG_NUM_MASK		(0x7 << PMU_TDC0_AVG_NUM_OFFS)
 31
 32/* Dove Thermal Diode Control 1 Register */
 33#define PMU_TEMP_DIOD_CTRL1_REG		0x04
 34#define PMU_TDC1_TEMP_VALID_MASK	(0x1 << 10)
 35
 36/* Dove Thermal Sensor Dev Structure */
 37struct dove_thermal_priv {
 38	void __iomem *sensor;
 39	void __iomem *control;
 40};
 41
 42static int dove_init_sensor(const struct dove_thermal_priv *priv)
 43{
 44	u32 reg;
 45	u32 i;
 46
 47	/* Configure the Diode Control Register #0 */
 48	reg = readl_relaxed(priv->control);
 49
 50	/* Use average of 2 */
 51	reg &= ~PMU_TDC0_AVG_NUM_MASK;
 52	reg |= (0x1 << PMU_TDC0_AVG_NUM_OFFS);
 53
 54	/* Reference calibration value */
 55	reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
 56	reg |= (0x0F1 << PMU_TDC0_REF_CAL_CNT_OFFS);
 57
 58	/* Set the high level reference for calibration */
 59	reg &= ~PMU_TDC0_SEL_VCAL_MASK;
 60	reg |= (0x2 << PMU_TDC0_SEL_VCAL_OFFS);
 61	writel(reg, priv->control);
 62
 63	/* Reset the sensor */
 64	reg = readl_relaxed(priv->control);
 65	writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
 66	writel(reg, priv->control);
 67
 68	/* Enable the sensor */
 69	reg = readl_relaxed(priv->sensor);
 70	reg &= ~PMU_TM_DISABLE_MASK;
 71	writel(reg, priv->sensor);
 72
 73	/* Poll the sensor for the first reading */
 74	for (i = 0; i < 1000000; i++) {
 75		reg = readl_relaxed(priv->sensor);
 76		if (reg & DOVE_THERMAL_TEMP_MASK)
 77			break;
 78	}
 79
 80	if (i == 1000000)
 81		return -EIO;
 82
 83	return 0;
 84}
 85
 86static int dove_get_temp(struct thermal_zone_device *thermal,
 87			  int *temp)
 88{
 89	unsigned long reg;
 90	struct dove_thermal_priv *priv = thermal_zone_device_priv(thermal);
 91
 92	/* Valid check */
 93	reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG);
 94	if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0)
 95		return -EIO;
 96
 97	/*
 98	 * Calculate temperature. According to Marvell internal
 99	 * documentation the formula for this is:
100	 * Celsius = (322-reg)/1.3625
101	 */
102	reg = readl_relaxed(priv->sensor);
103	reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK;
104	*temp = ((3220000000UL - (10000000UL * reg)) / 13625);
105
106	return 0;
107}
108
109static struct thermal_zone_device_ops ops = {
110	.get_temp = dove_get_temp,
111};
112
113static const struct of_device_id dove_thermal_id_table[] = {
114	{ .compatible = "marvell,dove-thermal" },
115	{}
116};
117
118static int dove_thermal_probe(struct platform_device *pdev)
119{
120	struct thermal_zone_device *thermal = NULL;
121	struct dove_thermal_priv *priv;
122	int ret;
123
124	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
125	if (!priv)
126		return -ENOMEM;
127
128	priv->sensor = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
129	if (IS_ERR(priv->sensor))
130		return PTR_ERR(priv->sensor);
131
132	priv->control = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
133	if (IS_ERR(priv->control))
134		return PTR_ERR(priv->control);
135
136	ret = dove_init_sensor(priv);
137	if (ret) {
138		dev_err(&pdev->dev, "Failed to initialize sensor\n");
139		return ret;
140	}
141
142	thermal = thermal_tripless_zone_device_register("dove_thermal", priv,
143							&ops, NULL);
144	if (IS_ERR(thermal)) {
145		dev_err(&pdev->dev,
146			"Failed to register thermal zone device\n");
147		return PTR_ERR(thermal);
148	}
149
150	ret = thermal_zone_device_enable(thermal);
151	if (ret) {
152		thermal_zone_device_unregister(thermal);
153		return ret;
154	}
155
156	platform_set_drvdata(pdev, thermal);
157
158	return 0;
159}
160
161static void dove_thermal_exit(struct platform_device *pdev)
162{
163	struct thermal_zone_device *dove_thermal =
164		platform_get_drvdata(pdev);
165
166	thermal_zone_device_unregister(dove_thermal);
167}
168
169MODULE_DEVICE_TABLE(of, dove_thermal_id_table);
170
171static struct platform_driver dove_thermal_driver = {
172	.probe = dove_thermal_probe,
173	.remove_new = dove_thermal_exit,
174	.driver = {
175		.name = "dove_thermal",
176		.of_match_table = dove_thermal_id_table,
177	},
178};
179
180module_platform_driver(dove_thermal_driver);
181
182MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
183MODULE_DESCRIPTION("Dove thermal driver");
184MODULE_LICENSE("GPL");