Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Driver for PCA9685 16-channel 12-bit PWM LED controller
4 *
5 * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
6 * Copyright (C) 2015 Clemens Gruber <clemens.gruber@pqgruber.com>
7 *
8 * based on the pwm-twl-led.c driver
9 */
10
11#include <linux/acpi.h>
12#include <linux/gpio/driver.h>
13#include <linux/i2c.h>
14#include <linux/module.h>
15#include <linux/mutex.h>
16#include <linux/platform_device.h>
17#include <linux/property.h>
18#include <linux/pwm.h>
19#include <linux/regmap.h>
20#include <linux/slab.h>
21#include <linux/delay.h>
22#include <linux/pm_runtime.h>
23#include <linux/bitmap.h>
24
25/*
26 * Because the PCA9685 has only one prescaler per chip, only the first channel
27 * that is enabled is allowed to change the prescale register.
28 * PWM channels requested afterwards must use a period that results in the same
29 * prescale setting as the one set by the first requested channel.
30 * GPIOs do not count as enabled PWMs as they are not using the prescaler.
31 */
32
33#define PCA9685_MODE1 0x00
34#define PCA9685_MODE2 0x01
35#define PCA9685_SUBADDR1 0x02
36#define PCA9685_SUBADDR2 0x03
37#define PCA9685_SUBADDR3 0x04
38#define PCA9685_ALLCALLADDR 0x05
39#define PCA9685_LEDX_ON_L 0x06
40#define PCA9685_LEDX_ON_H 0x07
41#define PCA9685_LEDX_OFF_L 0x08
42#define PCA9685_LEDX_OFF_H 0x09
43
44#define PCA9685_ALL_LED_ON_L 0xFA
45#define PCA9685_ALL_LED_ON_H 0xFB
46#define PCA9685_ALL_LED_OFF_L 0xFC
47#define PCA9685_ALL_LED_OFF_H 0xFD
48#define PCA9685_PRESCALE 0xFE
49
50#define PCA9685_PRESCALE_MIN 0x03 /* => max. frequency of 1526 Hz */
51#define PCA9685_PRESCALE_MAX 0xFF /* => min. frequency of 24 Hz */
52
53#define PCA9685_COUNTER_RANGE 4096
54#define PCA9685_OSC_CLOCK_MHZ 25 /* Internal oscillator with 25 MHz */
55
56#define PCA9685_NUMREGS 0xFF
57#define PCA9685_MAXCHAN 0x10
58
59#define LED_FULL BIT(4)
60#define MODE1_ALLCALL BIT(0)
61#define MODE1_SUB3 BIT(1)
62#define MODE1_SUB2 BIT(2)
63#define MODE1_SUB1 BIT(3)
64#define MODE1_SLEEP BIT(4)
65#define MODE2_INVRT BIT(4)
66#define MODE2_OUTDRV BIT(2)
67
68#define LED_N_ON_H(N) (PCA9685_LEDX_ON_H + (4 * (N)))
69#define LED_N_ON_L(N) (PCA9685_LEDX_ON_L + (4 * (N)))
70#define LED_N_OFF_H(N) (PCA9685_LEDX_OFF_H + (4 * (N)))
71#define LED_N_OFF_L(N) (PCA9685_LEDX_OFF_L + (4 * (N)))
72
73#define REG_ON_H(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_ON_H : LED_N_ON_H((C)))
74#define REG_ON_L(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_ON_L : LED_N_ON_L((C)))
75#define REG_OFF_H(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_OFF_H : LED_N_OFF_H((C)))
76#define REG_OFF_L(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_OFF_L : LED_N_OFF_L((C)))
77
78struct pca9685 {
79 struct regmap *regmap;
80 struct mutex lock;
81 DECLARE_BITMAP(pwms_enabled, PCA9685_MAXCHAN + 1);
82#if IS_ENABLED(CONFIG_GPIOLIB)
83 struct gpio_chip gpio;
84 DECLARE_BITMAP(pwms_inuse, PCA9685_MAXCHAN + 1);
85#endif
86};
87
88static inline struct pca9685 *to_pca(struct pwm_chip *chip)
89{
90 return pwmchip_get_drvdata(chip);
91}
92
93/* This function is supposed to be called with the lock mutex held */
94static bool pca9685_prescaler_can_change(struct pca9685 *pca, int channel)
95{
96 /* No PWM enabled: Change allowed */
97 if (bitmap_empty(pca->pwms_enabled, PCA9685_MAXCHAN + 1))
98 return true;
99 /* More than one PWM enabled: Change not allowed */
100 if (bitmap_weight(pca->pwms_enabled, PCA9685_MAXCHAN + 1) > 1)
101 return false;
102 /*
103 * Only one PWM enabled: Change allowed if the PWM about to
104 * be changed is the one that is already enabled
105 */
106 return test_bit(channel, pca->pwms_enabled);
107}
108
109static int pca9685_read_reg(struct pwm_chip *chip, unsigned int reg, unsigned int *val)
110{
111 struct pca9685 *pca = to_pca(chip);
112 struct device *dev = pwmchip_parent(chip);
113 int err;
114
115 err = regmap_read(pca->regmap, reg, val);
116 if (err)
117 dev_err(dev, "regmap_read of register 0x%x failed: %pe\n", reg, ERR_PTR(err));
118
119 return err;
120}
121
122static int pca9685_write_reg(struct pwm_chip *chip, unsigned int reg, unsigned int val)
123{
124 struct pca9685 *pca = to_pca(chip);
125 struct device *dev = pwmchip_parent(chip);
126 int err;
127
128 err = regmap_write(pca->regmap, reg, val);
129 if (err)
130 dev_err(dev, "regmap_write to register 0x%x failed: %pe\n", reg, ERR_PTR(err));
131
132 return err;
133}
134
135/* Helper function to set the duty cycle ratio to duty/4096 (e.g. duty=2048 -> 50%) */
136static void pca9685_pwm_set_duty(struct pwm_chip *chip, int channel, unsigned int duty)
137{
138 struct pwm_device *pwm = &chip->pwms[channel];
139 unsigned int on, off;
140
141 if (duty == 0) {
142 /* Set the full OFF bit, which has the highest precedence */
143 pca9685_write_reg(chip, REG_OFF_H(channel), LED_FULL);
144 return;
145 } else if (duty >= PCA9685_COUNTER_RANGE) {
146 /* Set the full ON bit and clear the full OFF bit */
147 pca9685_write_reg(chip, REG_ON_H(channel), LED_FULL);
148 pca9685_write_reg(chip, REG_OFF_H(channel), 0);
149 return;
150 }
151
152
153 if (pwm->state.usage_power && channel < PCA9685_MAXCHAN) {
154 /*
155 * If usage_power is set, the pca9685 driver will phase shift
156 * the individual channels relative to their channel number.
157 * This improves EMI because the enabled channels no longer
158 * turn on at the same time, while still maintaining the
159 * configured duty cycle / power output.
160 */
161 on = channel * PCA9685_COUNTER_RANGE / PCA9685_MAXCHAN;
162 } else
163 on = 0;
164
165 off = (on + duty) % PCA9685_COUNTER_RANGE;
166
167 /* Set ON time (clears full ON bit) */
168 pca9685_write_reg(chip, REG_ON_L(channel), on & 0xff);
169 pca9685_write_reg(chip, REG_ON_H(channel), (on >> 8) & 0xf);
170 /* Set OFF time (clears full OFF bit) */
171 pca9685_write_reg(chip, REG_OFF_L(channel), off & 0xff);
172 pca9685_write_reg(chip, REG_OFF_H(channel), (off >> 8) & 0xf);
173}
174
175static unsigned int pca9685_pwm_get_duty(struct pwm_chip *chip, int channel)
176{
177 struct pwm_device *pwm = &chip->pwms[channel];
178 unsigned int off = 0, on = 0, val = 0;
179
180 if (WARN_ON(channel >= PCA9685_MAXCHAN)) {
181 /* HW does not support reading state of "all LEDs" channel */
182 return 0;
183 }
184
185 pca9685_read_reg(chip, LED_N_OFF_H(channel), &off);
186 if (off & LED_FULL) {
187 /* Full OFF bit is set */
188 return 0;
189 }
190
191 pca9685_read_reg(chip, LED_N_ON_H(channel), &on);
192 if (on & LED_FULL) {
193 /* Full ON bit is set */
194 return PCA9685_COUNTER_RANGE;
195 }
196
197 pca9685_read_reg(chip, LED_N_OFF_L(channel), &val);
198 off = ((off & 0xf) << 8) | (val & 0xff);
199 if (!pwm->state.usage_power)
200 return off;
201
202 /* Read ON register to calculate duty cycle of staggered output */
203 if (pca9685_read_reg(chip, LED_N_ON_L(channel), &val)) {
204 /* Reset val to 0 in case reading LED_N_ON_L failed */
205 val = 0;
206 }
207 on = ((on & 0xf) << 8) | (val & 0xff);
208 return (off - on) & (PCA9685_COUNTER_RANGE - 1);
209}
210
211#if IS_ENABLED(CONFIG_GPIOLIB)
212static bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca, int pwm_idx)
213{
214 bool is_inuse;
215
216 mutex_lock(&pca->lock);
217 if (pwm_idx >= PCA9685_MAXCHAN) {
218 /*
219 * "All LEDs" channel:
220 * pretend already in use if any of the PWMs are requested
221 */
222 if (!bitmap_empty(pca->pwms_inuse, PCA9685_MAXCHAN)) {
223 is_inuse = true;
224 goto out;
225 }
226 } else {
227 /*
228 * Regular channel:
229 * pretend already in use if the "all LEDs" channel is requested
230 */
231 if (test_bit(PCA9685_MAXCHAN, pca->pwms_inuse)) {
232 is_inuse = true;
233 goto out;
234 }
235 }
236 is_inuse = test_and_set_bit(pwm_idx, pca->pwms_inuse);
237out:
238 mutex_unlock(&pca->lock);
239 return is_inuse;
240}
241
242static void pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx)
243{
244 mutex_lock(&pca->lock);
245 clear_bit(pwm_idx, pca->pwms_inuse);
246 mutex_unlock(&pca->lock);
247}
248
249static int pca9685_pwm_gpio_request(struct gpio_chip *gpio, unsigned int offset)
250{
251 struct pwm_chip *chip = gpiochip_get_data(gpio);
252 struct pca9685 *pca = to_pca(chip);
253
254 if (pca9685_pwm_test_and_set_inuse(pca, offset))
255 return -EBUSY;
256 pm_runtime_get_sync(pwmchip_parent(chip));
257 return 0;
258}
259
260static int pca9685_pwm_gpio_get(struct gpio_chip *gpio, unsigned int offset)
261{
262 struct pwm_chip *chip = gpiochip_get_data(gpio);
263
264 return pca9685_pwm_get_duty(chip, offset) != 0;
265}
266
267static void pca9685_pwm_gpio_set(struct gpio_chip *gpio, unsigned int offset,
268 int value)
269{
270 struct pwm_chip *chip = gpiochip_get_data(gpio);
271
272 pca9685_pwm_set_duty(chip, offset, value ? PCA9685_COUNTER_RANGE : 0);
273}
274
275static void pca9685_pwm_gpio_free(struct gpio_chip *gpio, unsigned int offset)
276{
277 struct pwm_chip *chip = gpiochip_get_data(gpio);
278 struct pca9685 *pca = to_pca(chip);
279
280 pca9685_pwm_set_duty(chip, offset, 0);
281 pm_runtime_put(pwmchip_parent(chip));
282 pca9685_pwm_clear_inuse(pca, offset);
283}
284
285static int pca9685_pwm_gpio_get_direction(struct gpio_chip *chip,
286 unsigned int offset)
287{
288 /* Always out */
289 return GPIO_LINE_DIRECTION_OUT;
290}
291
292static int pca9685_pwm_gpio_direction_input(struct gpio_chip *gpio,
293 unsigned int offset)
294{
295 return -EINVAL;
296}
297
298static int pca9685_pwm_gpio_direction_output(struct gpio_chip *gpio,
299 unsigned int offset, int value)
300{
301 pca9685_pwm_gpio_set(gpio, offset, value);
302
303 return 0;
304}
305
306/*
307 * The PCA9685 has a bit for turning the PWM output full off or on. Some
308 * boards like Intel Galileo actually uses these as normal GPIOs so we
309 * expose a GPIO chip here which can exclusively take over the underlying
310 * PWM channel.
311 */
312static int pca9685_pwm_gpio_probe(struct pwm_chip *chip)
313{
314 struct pca9685 *pca = to_pca(chip);
315 struct device *dev = pwmchip_parent(chip);
316
317 pca->gpio.label = dev_name(dev);
318 pca->gpio.parent = dev;
319 pca->gpio.request = pca9685_pwm_gpio_request;
320 pca->gpio.free = pca9685_pwm_gpio_free;
321 pca->gpio.get_direction = pca9685_pwm_gpio_get_direction;
322 pca->gpio.direction_input = pca9685_pwm_gpio_direction_input;
323 pca->gpio.direction_output = pca9685_pwm_gpio_direction_output;
324 pca->gpio.get = pca9685_pwm_gpio_get;
325 pca->gpio.set = pca9685_pwm_gpio_set;
326 pca->gpio.base = -1;
327 pca->gpio.ngpio = PCA9685_MAXCHAN;
328 pca->gpio.can_sleep = true;
329
330 return devm_gpiochip_add_data(dev, &pca->gpio, chip);
331}
332#else
333static inline bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca,
334 int pwm_idx)
335{
336 return false;
337}
338
339static inline void
340pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx)
341{
342}
343
344static inline int pca9685_pwm_gpio_probe(struct pwm_chip *chip)
345{
346 return 0;
347}
348#endif
349
350static void pca9685_set_sleep_mode(struct pwm_chip *chip, bool enable)
351{
352 struct device *dev = pwmchip_parent(chip);
353 struct pca9685 *pca = to_pca(chip);
354 int err = regmap_update_bits(pca->regmap, PCA9685_MODE1,
355 MODE1_SLEEP, enable ? MODE1_SLEEP : 0);
356 if (err) {
357 dev_err(dev, "regmap_update_bits of register 0x%x failed: %pe\n",
358 PCA9685_MODE1, ERR_PTR(err));
359 return;
360 }
361
362 if (!enable) {
363 /* Wait 500us for the oscillator to be back up */
364 udelay(500);
365 }
366}
367
368static int __pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
369 const struct pwm_state *state)
370{
371 struct pca9685 *pca = to_pca(chip);
372 unsigned long long duty, prescale;
373 unsigned int val = 0;
374
375 if (state->polarity != PWM_POLARITY_NORMAL)
376 return -EINVAL;
377
378 prescale = DIV_ROUND_CLOSEST_ULL(PCA9685_OSC_CLOCK_MHZ * state->period,
379 PCA9685_COUNTER_RANGE * 1000) - 1;
380 if (prescale < PCA9685_PRESCALE_MIN || prescale > PCA9685_PRESCALE_MAX) {
381 dev_err(pwmchip_parent(chip), "pwm not changed: period out of bounds!\n");
382 return -EINVAL;
383 }
384
385 if (!state->enabled) {
386 pca9685_pwm_set_duty(chip, pwm->hwpwm, 0);
387 return 0;
388 }
389
390 pca9685_read_reg(chip, PCA9685_PRESCALE, &val);
391 if (prescale != val) {
392 if (!pca9685_prescaler_can_change(pca, pwm->hwpwm)) {
393 dev_err(pwmchip_parent(chip),
394 "pwm not changed: periods of enabled pwms must match!\n");
395 return -EBUSY;
396 }
397
398 /*
399 * Putting the chip briefly into SLEEP mode
400 * at this point won't interfere with the
401 * pm_runtime framework, because the pm_runtime
402 * state is guaranteed active here.
403 */
404 /* Put chip into sleep mode */
405 pca9685_set_sleep_mode(chip, true);
406
407 /* Change the chip-wide output frequency */
408 pca9685_write_reg(chip, PCA9685_PRESCALE, prescale);
409
410 /* Wake the chip up */
411 pca9685_set_sleep_mode(chip, false);
412 }
413
414 duty = PCA9685_COUNTER_RANGE * state->duty_cycle;
415 duty = DIV_ROUND_UP_ULL(duty, state->period);
416 pca9685_pwm_set_duty(chip, pwm->hwpwm, duty);
417 return 0;
418}
419
420static int pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
421 const struct pwm_state *state)
422{
423 struct pca9685 *pca = to_pca(chip);
424 int ret;
425
426 mutex_lock(&pca->lock);
427 ret = __pca9685_pwm_apply(chip, pwm, state);
428 if (ret == 0) {
429 if (state->enabled)
430 set_bit(pwm->hwpwm, pca->pwms_enabled);
431 else
432 clear_bit(pwm->hwpwm, pca->pwms_enabled);
433 }
434 mutex_unlock(&pca->lock);
435
436 return ret;
437}
438
439static int pca9685_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
440 struct pwm_state *state)
441{
442 unsigned long long duty;
443 unsigned int val = 0;
444
445 /* Calculate (chip-wide) period from prescale value */
446 pca9685_read_reg(chip, PCA9685_PRESCALE, &val);
447 /*
448 * PCA9685_OSC_CLOCK_MHZ is 25, i.e. an integer divider of 1000.
449 * The following calculation is therefore only a multiplication
450 * and we are not losing precision.
451 */
452 state->period = (PCA9685_COUNTER_RANGE * 1000 / PCA9685_OSC_CLOCK_MHZ) *
453 (val + 1);
454
455 /* The (per-channel) polarity is fixed */
456 state->polarity = PWM_POLARITY_NORMAL;
457
458 if (pwm->hwpwm >= PCA9685_MAXCHAN) {
459 /*
460 * The "all LEDs" channel does not support HW readout
461 * Return 0 and disabled for backwards compatibility
462 */
463 state->duty_cycle = 0;
464 state->enabled = false;
465 return 0;
466 }
467
468 state->enabled = true;
469 duty = pca9685_pwm_get_duty(chip, pwm->hwpwm);
470 state->duty_cycle = DIV_ROUND_DOWN_ULL(duty * state->period, PCA9685_COUNTER_RANGE);
471
472 return 0;
473}
474
475static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
476{
477 struct pca9685 *pca = to_pca(chip);
478
479 if (pca9685_pwm_test_and_set_inuse(pca, pwm->hwpwm))
480 return -EBUSY;
481
482 if (pwm->hwpwm < PCA9685_MAXCHAN) {
483 /* PWMs - except the "all LEDs" channel - default to enabled */
484 mutex_lock(&pca->lock);
485 set_bit(pwm->hwpwm, pca->pwms_enabled);
486 mutex_unlock(&pca->lock);
487 }
488
489 pm_runtime_get_sync(pwmchip_parent(chip));
490
491 return 0;
492}
493
494static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
495{
496 struct pca9685 *pca = to_pca(chip);
497
498 mutex_lock(&pca->lock);
499 pca9685_pwm_set_duty(chip, pwm->hwpwm, 0);
500 clear_bit(pwm->hwpwm, pca->pwms_enabled);
501 mutex_unlock(&pca->lock);
502
503 pm_runtime_put(pwmchip_parent(chip));
504 pca9685_pwm_clear_inuse(pca, pwm->hwpwm);
505}
506
507static const struct pwm_ops pca9685_pwm_ops = {
508 .apply = pca9685_pwm_apply,
509 .get_state = pca9685_pwm_get_state,
510 .request = pca9685_pwm_request,
511 .free = pca9685_pwm_free,
512};
513
514static const struct regmap_config pca9685_regmap_i2c_config = {
515 .reg_bits = 8,
516 .val_bits = 8,
517 .max_register = PCA9685_NUMREGS,
518 .cache_type = REGCACHE_NONE,
519};
520
521static int pca9685_pwm_probe(struct i2c_client *client)
522{
523 struct pwm_chip *chip;
524 struct pca9685 *pca;
525 unsigned int reg;
526 int ret;
527
528 /* Add an extra channel for ALL_LED */
529 chip = devm_pwmchip_alloc(&client->dev, PCA9685_MAXCHAN + 1, sizeof(*pca));
530 if (IS_ERR(chip))
531 return PTR_ERR(chip);
532 pca = to_pca(chip);
533
534 pca->regmap = devm_regmap_init_i2c(client, &pca9685_regmap_i2c_config);
535 if (IS_ERR(pca->regmap)) {
536 ret = PTR_ERR(pca->regmap);
537 dev_err(&client->dev, "Failed to initialize register map: %d\n",
538 ret);
539 return ret;
540 }
541
542 i2c_set_clientdata(client, chip);
543
544 mutex_init(&pca->lock);
545
546 ret = pca9685_read_reg(chip, PCA9685_MODE2, ®);
547 if (ret)
548 return ret;
549
550 if (device_property_read_bool(&client->dev, "invert"))
551 reg |= MODE2_INVRT;
552 else
553 reg &= ~MODE2_INVRT;
554
555 if (device_property_read_bool(&client->dev, "open-drain"))
556 reg &= ~MODE2_OUTDRV;
557 else
558 reg |= MODE2_OUTDRV;
559
560 ret = pca9685_write_reg(chip, PCA9685_MODE2, reg);
561 if (ret)
562 return ret;
563
564 /* Disable all LED ALLCALL and SUBx addresses to avoid bus collisions */
565 pca9685_read_reg(chip, PCA9685_MODE1, ®);
566 reg &= ~(MODE1_ALLCALL | MODE1_SUB1 | MODE1_SUB2 | MODE1_SUB3);
567 pca9685_write_reg(chip, PCA9685_MODE1, reg);
568
569 /* Reset OFF/ON registers to POR default */
570 pca9685_write_reg(chip, PCA9685_ALL_LED_OFF_L, 0);
571 pca9685_write_reg(chip, PCA9685_ALL_LED_OFF_H, LED_FULL);
572 pca9685_write_reg(chip, PCA9685_ALL_LED_ON_L, 0);
573 pca9685_write_reg(chip, PCA9685_ALL_LED_ON_H, LED_FULL);
574
575 chip->ops = &pca9685_pwm_ops;
576
577 ret = pwmchip_add(chip);
578 if (ret < 0)
579 return ret;
580
581 ret = pca9685_pwm_gpio_probe(chip);
582 if (ret < 0) {
583 pwmchip_remove(chip);
584 return ret;
585 }
586
587 pm_runtime_enable(&client->dev);
588
589 if (pm_runtime_enabled(&client->dev)) {
590 /*
591 * Although the chip comes out of power-up in the sleep state,
592 * we force it to sleep in case it was woken up before
593 */
594 pca9685_set_sleep_mode(chip, true);
595 pm_runtime_set_suspended(&client->dev);
596 } else {
597 /* Wake the chip up if runtime PM is disabled */
598 pca9685_set_sleep_mode(chip, false);
599 }
600
601 return 0;
602}
603
604static void pca9685_pwm_remove(struct i2c_client *client)
605{
606 struct pwm_chip *chip = i2c_get_clientdata(client);
607
608 pwmchip_remove(chip);
609
610 if (!pm_runtime_enabled(&client->dev)) {
611 /* Put chip in sleep state if runtime PM is disabled */
612 pca9685_set_sleep_mode(chip, true);
613 }
614
615 pm_runtime_disable(&client->dev);
616}
617
618static int __maybe_unused pca9685_pwm_runtime_suspend(struct device *dev)
619{
620 struct i2c_client *client = to_i2c_client(dev);
621 struct pwm_chip *chip = i2c_get_clientdata(client);
622
623 pca9685_set_sleep_mode(chip, true);
624 return 0;
625}
626
627static int __maybe_unused pca9685_pwm_runtime_resume(struct device *dev)
628{
629 struct i2c_client *client = to_i2c_client(dev);
630 struct pwm_chip *chip = i2c_get_clientdata(client);
631
632 pca9685_set_sleep_mode(chip, false);
633 return 0;
634}
635
636static const struct i2c_device_id pca9685_id[] = {
637 { "pca9685" },
638 { /* sentinel */ }
639};
640MODULE_DEVICE_TABLE(i2c, pca9685_id);
641
642#ifdef CONFIG_ACPI
643static const struct acpi_device_id pca9685_acpi_ids[] = {
644 { "INT3492", 0 },
645 { /* sentinel */ },
646};
647MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids);
648#endif
649
650#ifdef CONFIG_OF
651static const struct of_device_id pca9685_dt_ids[] = {
652 { .compatible = "nxp,pca9685-pwm", },
653 { /* sentinel */ }
654};
655MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
656#endif
657
658static const struct dev_pm_ops pca9685_pwm_pm = {
659 SET_RUNTIME_PM_OPS(pca9685_pwm_runtime_suspend,
660 pca9685_pwm_runtime_resume, NULL)
661};
662
663static struct i2c_driver pca9685_i2c_driver = {
664 .driver = {
665 .name = "pca9685-pwm",
666 .acpi_match_table = ACPI_PTR(pca9685_acpi_ids),
667 .of_match_table = of_match_ptr(pca9685_dt_ids),
668 .pm = &pca9685_pwm_pm,
669 },
670 .probe = pca9685_pwm_probe,
671 .remove = pca9685_pwm_remove,
672 .id_table = pca9685_id,
673};
674
675module_i2c_driver(pca9685_i2c_driver);
676
677MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de>");
678MODULE_DESCRIPTION("PWM driver for PCA9685");
679MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Driver for PCA9685 16-channel 12-bit PWM LED controller
4 *
5 * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
6 * Copyright (C) 2015 Clemens Gruber <clemens.gruber@pqgruber.com>
7 *
8 * based on the pwm-twl-led.c driver
9 */
10
11#include <linux/acpi.h>
12#include <linux/gpio/driver.h>
13#include <linux/i2c.h>
14#include <linux/module.h>
15#include <linux/mutex.h>
16#include <linux/platform_device.h>
17#include <linux/property.h>
18#include <linux/pwm.h>
19#include <linux/regmap.h>
20#include <linux/slab.h>
21#include <linux/delay.h>
22#include <linux/pm_runtime.h>
23#include <linux/bitmap.h>
24
25/*
26 * Because the PCA9685 has only one prescaler per chip, only the first channel
27 * that is enabled is allowed to change the prescale register.
28 * PWM channels requested afterwards must use a period that results in the same
29 * prescale setting as the one set by the first requested channel.
30 * GPIOs do not count as enabled PWMs as they are not using the prescaler.
31 */
32
33#define PCA9685_MODE1 0x00
34#define PCA9685_MODE2 0x01
35#define PCA9685_SUBADDR1 0x02
36#define PCA9685_SUBADDR2 0x03
37#define PCA9685_SUBADDR3 0x04
38#define PCA9685_ALLCALLADDR 0x05
39#define PCA9685_LEDX_ON_L 0x06
40#define PCA9685_LEDX_ON_H 0x07
41#define PCA9685_LEDX_OFF_L 0x08
42#define PCA9685_LEDX_OFF_H 0x09
43
44#define PCA9685_ALL_LED_ON_L 0xFA
45#define PCA9685_ALL_LED_ON_H 0xFB
46#define PCA9685_ALL_LED_OFF_L 0xFC
47#define PCA9685_ALL_LED_OFF_H 0xFD
48#define PCA9685_PRESCALE 0xFE
49
50#define PCA9685_PRESCALE_MIN 0x03 /* => max. frequency of 1526 Hz */
51#define PCA9685_PRESCALE_MAX 0xFF /* => min. frequency of 24 Hz */
52
53#define PCA9685_COUNTER_RANGE 4096
54#define PCA9685_OSC_CLOCK_MHZ 25 /* Internal oscillator with 25 MHz */
55
56#define PCA9685_NUMREGS 0xFF
57#define PCA9685_MAXCHAN 0x10
58
59#define LED_FULL BIT(4)
60#define MODE1_ALLCALL BIT(0)
61#define MODE1_SUB3 BIT(1)
62#define MODE1_SUB2 BIT(2)
63#define MODE1_SUB1 BIT(3)
64#define MODE1_SLEEP BIT(4)
65#define MODE2_INVRT BIT(4)
66#define MODE2_OUTDRV BIT(2)
67
68#define LED_N_ON_H(N) (PCA9685_LEDX_ON_H + (4 * (N)))
69#define LED_N_ON_L(N) (PCA9685_LEDX_ON_L + (4 * (N)))
70#define LED_N_OFF_H(N) (PCA9685_LEDX_OFF_H + (4 * (N)))
71#define LED_N_OFF_L(N) (PCA9685_LEDX_OFF_L + (4 * (N)))
72
73#define REG_ON_H(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_ON_H : LED_N_ON_H((C)))
74#define REG_ON_L(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_ON_L : LED_N_ON_L((C)))
75#define REG_OFF_H(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_OFF_H : LED_N_OFF_H((C)))
76#define REG_OFF_L(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_OFF_L : LED_N_OFF_L((C)))
77
78struct pca9685 {
79 struct pwm_chip chip;
80 struct regmap *regmap;
81 struct mutex lock;
82 DECLARE_BITMAP(pwms_enabled, PCA9685_MAXCHAN + 1);
83#if IS_ENABLED(CONFIG_GPIOLIB)
84 struct gpio_chip gpio;
85 DECLARE_BITMAP(pwms_inuse, PCA9685_MAXCHAN + 1);
86#endif
87};
88
89static inline struct pca9685 *to_pca(struct pwm_chip *chip)
90{
91 return container_of(chip, struct pca9685, chip);
92}
93
94/* This function is supposed to be called with the lock mutex held */
95static bool pca9685_prescaler_can_change(struct pca9685 *pca, int channel)
96{
97 /* No PWM enabled: Change allowed */
98 if (bitmap_empty(pca->pwms_enabled, PCA9685_MAXCHAN + 1))
99 return true;
100 /* More than one PWM enabled: Change not allowed */
101 if (bitmap_weight(pca->pwms_enabled, PCA9685_MAXCHAN + 1) > 1)
102 return false;
103 /*
104 * Only one PWM enabled: Change allowed if the PWM about to
105 * be changed is the one that is already enabled
106 */
107 return test_bit(channel, pca->pwms_enabled);
108}
109
110static int pca9685_read_reg(struct pca9685 *pca, unsigned int reg, unsigned int *val)
111{
112 struct device *dev = pca->chip.dev;
113 int err;
114
115 err = regmap_read(pca->regmap, reg, val);
116 if (err)
117 dev_err(dev, "regmap_read of register 0x%x failed: %pe\n", reg, ERR_PTR(err));
118
119 return err;
120}
121
122static int pca9685_write_reg(struct pca9685 *pca, unsigned int reg, unsigned int val)
123{
124 struct device *dev = pca->chip.dev;
125 int err;
126
127 err = regmap_write(pca->regmap, reg, val);
128 if (err)
129 dev_err(dev, "regmap_write to register 0x%x failed: %pe\n", reg, ERR_PTR(err));
130
131 return err;
132}
133
134/* Helper function to set the duty cycle ratio to duty/4096 (e.g. duty=2048 -> 50%) */
135static void pca9685_pwm_set_duty(struct pca9685 *pca, int channel, unsigned int duty)
136{
137 struct pwm_device *pwm = &pca->chip.pwms[channel];
138 unsigned int on, off;
139
140 if (duty == 0) {
141 /* Set the full OFF bit, which has the highest precedence */
142 pca9685_write_reg(pca, REG_OFF_H(channel), LED_FULL);
143 return;
144 } else if (duty >= PCA9685_COUNTER_RANGE) {
145 /* Set the full ON bit and clear the full OFF bit */
146 pca9685_write_reg(pca, REG_ON_H(channel), LED_FULL);
147 pca9685_write_reg(pca, REG_OFF_H(channel), 0);
148 return;
149 }
150
151
152 if (pwm->state.usage_power && channel < PCA9685_MAXCHAN) {
153 /*
154 * If usage_power is set, the pca9685 driver will phase shift
155 * the individual channels relative to their channel number.
156 * This improves EMI because the enabled channels no longer
157 * turn on at the same time, while still maintaining the
158 * configured duty cycle / power output.
159 */
160 on = channel * PCA9685_COUNTER_RANGE / PCA9685_MAXCHAN;
161 } else
162 on = 0;
163
164 off = (on + duty) % PCA9685_COUNTER_RANGE;
165
166 /* Set ON time (clears full ON bit) */
167 pca9685_write_reg(pca, REG_ON_L(channel), on & 0xff);
168 pca9685_write_reg(pca, REG_ON_H(channel), (on >> 8) & 0xf);
169 /* Set OFF time (clears full OFF bit) */
170 pca9685_write_reg(pca, REG_OFF_L(channel), off & 0xff);
171 pca9685_write_reg(pca, REG_OFF_H(channel), (off >> 8) & 0xf);
172}
173
174static unsigned int pca9685_pwm_get_duty(struct pca9685 *pca, int channel)
175{
176 struct pwm_device *pwm = &pca->chip.pwms[channel];
177 unsigned int off = 0, on = 0, val = 0;
178
179 if (WARN_ON(channel >= PCA9685_MAXCHAN)) {
180 /* HW does not support reading state of "all LEDs" channel */
181 return 0;
182 }
183
184 pca9685_read_reg(pca, LED_N_OFF_H(channel), &off);
185 if (off & LED_FULL) {
186 /* Full OFF bit is set */
187 return 0;
188 }
189
190 pca9685_read_reg(pca, LED_N_ON_H(channel), &on);
191 if (on & LED_FULL) {
192 /* Full ON bit is set */
193 return PCA9685_COUNTER_RANGE;
194 }
195
196 pca9685_read_reg(pca, LED_N_OFF_L(channel), &val);
197 off = ((off & 0xf) << 8) | (val & 0xff);
198 if (!pwm->state.usage_power)
199 return off;
200
201 /* Read ON register to calculate duty cycle of staggered output */
202 if (pca9685_read_reg(pca, LED_N_ON_L(channel), &val)) {
203 /* Reset val to 0 in case reading LED_N_ON_L failed */
204 val = 0;
205 }
206 on = ((on & 0xf) << 8) | (val & 0xff);
207 return (off - on) & (PCA9685_COUNTER_RANGE - 1);
208}
209
210#if IS_ENABLED(CONFIG_GPIOLIB)
211static bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca, int pwm_idx)
212{
213 bool is_inuse;
214
215 mutex_lock(&pca->lock);
216 if (pwm_idx >= PCA9685_MAXCHAN) {
217 /*
218 * "All LEDs" channel:
219 * pretend already in use if any of the PWMs are requested
220 */
221 if (!bitmap_empty(pca->pwms_inuse, PCA9685_MAXCHAN)) {
222 is_inuse = true;
223 goto out;
224 }
225 } else {
226 /*
227 * Regular channel:
228 * pretend already in use if the "all LEDs" channel is requested
229 */
230 if (test_bit(PCA9685_MAXCHAN, pca->pwms_inuse)) {
231 is_inuse = true;
232 goto out;
233 }
234 }
235 is_inuse = test_and_set_bit(pwm_idx, pca->pwms_inuse);
236out:
237 mutex_unlock(&pca->lock);
238 return is_inuse;
239}
240
241static void pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx)
242{
243 mutex_lock(&pca->lock);
244 clear_bit(pwm_idx, pca->pwms_inuse);
245 mutex_unlock(&pca->lock);
246}
247
248static int pca9685_pwm_gpio_request(struct gpio_chip *gpio, unsigned int offset)
249{
250 struct pca9685 *pca = gpiochip_get_data(gpio);
251
252 if (pca9685_pwm_test_and_set_inuse(pca, offset))
253 return -EBUSY;
254 pm_runtime_get_sync(pca->chip.dev);
255 return 0;
256}
257
258static int pca9685_pwm_gpio_get(struct gpio_chip *gpio, unsigned int offset)
259{
260 struct pca9685 *pca = gpiochip_get_data(gpio);
261
262 return pca9685_pwm_get_duty(pca, offset) != 0;
263}
264
265static void pca9685_pwm_gpio_set(struct gpio_chip *gpio, unsigned int offset,
266 int value)
267{
268 struct pca9685 *pca = gpiochip_get_data(gpio);
269
270 pca9685_pwm_set_duty(pca, offset, value ? PCA9685_COUNTER_RANGE : 0);
271}
272
273static void pca9685_pwm_gpio_free(struct gpio_chip *gpio, unsigned int offset)
274{
275 struct pca9685 *pca = gpiochip_get_data(gpio);
276
277 pca9685_pwm_set_duty(pca, offset, 0);
278 pm_runtime_put(pca->chip.dev);
279 pca9685_pwm_clear_inuse(pca, offset);
280}
281
282static int pca9685_pwm_gpio_get_direction(struct gpio_chip *chip,
283 unsigned int offset)
284{
285 /* Always out */
286 return GPIO_LINE_DIRECTION_OUT;
287}
288
289static int pca9685_pwm_gpio_direction_input(struct gpio_chip *gpio,
290 unsigned int offset)
291{
292 return -EINVAL;
293}
294
295static int pca9685_pwm_gpio_direction_output(struct gpio_chip *gpio,
296 unsigned int offset, int value)
297{
298 pca9685_pwm_gpio_set(gpio, offset, value);
299
300 return 0;
301}
302
303/*
304 * The PCA9685 has a bit for turning the PWM output full off or on. Some
305 * boards like Intel Galileo actually uses these as normal GPIOs so we
306 * expose a GPIO chip here which can exclusively take over the underlying
307 * PWM channel.
308 */
309static int pca9685_pwm_gpio_probe(struct pca9685 *pca)
310{
311 struct device *dev = pca->chip.dev;
312
313 pca->gpio.label = dev_name(dev);
314 pca->gpio.parent = dev;
315 pca->gpio.request = pca9685_pwm_gpio_request;
316 pca->gpio.free = pca9685_pwm_gpio_free;
317 pca->gpio.get_direction = pca9685_pwm_gpio_get_direction;
318 pca->gpio.direction_input = pca9685_pwm_gpio_direction_input;
319 pca->gpio.direction_output = pca9685_pwm_gpio_direction_output;
320 pca->gpio.get = pca9685_pwm_gpio_get;
321 pca->gpio.set = pca9685_pwm_gpio_set;
322 pca->gpio.base = -1;
323 pca->gpio.ngpio = PCA9685_MAXCHAN;
324 pca->gpio.can_sleep = true;
325
326 return devm_gpiochip_add_data(dev, &pca->gpio, pca);
327}
328#else
329static inline bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca,
330 int pwm_idx)
331{
332 return false;
333}
334
335static inline void
336pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx)
337{
338}
339
340static inline int pca9685_pwm_gpio_probe(struct pca9685 *pca)
341{
342 return 0;
343}
344#endif
345
346static void pca9685_set_sleep_mode(struct pca9685 *pca, bool enable)
347{
348 struct device *dev = pca->chip.dev;
349 int err = regmap_update_bits(pca->regmap, PCA9685_MODE1,
350 MODE1_SLEEP, enable ? MODE1_SLEEP : 0);
351 if (err) {
352 dev_err(dev, "regmap_update_bits of register 0x%x failed: %pe\n",
353 PCA9685_MODE1, ERR_PTR(err));
354 return;
355 }
356
357 if (!enable) {
358 /* Wait 500us for the oscillator to be back up */
359 udelay(500);
360 }
361}
362
363static int __pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
364 const struct pwm_state *state)
365{
366 struct pca9685 *pca = to_pca(chip);
367 unsigned long long duty, prescale;
368 unsigned int val = 0;
369
370 if (state->polarity != PWM_POLARITY_NORMAL)
371 return -EINVAL;
372
373 prescale = DIV_ROUND_CLOSEST_ULL(PCA9685_OSC_CLOCK_MHZ * state->period,
374 PCA9685_COUNTER_RANGE * 1000) - 1;
375 if (prescale < PCA9685_PRESCALE_MIN || prescale > PCA9685_PRESCALE_MAX) {
376 dev_err(chip->dev, "pwm not changed: period out of bounds!\n");
377 return -EINVAL;
378 }
379
380 if (!state->enabled) {
381 pca9685_pwm_set_duty(pca, pwm->hwpwm, 0);
382 return 0;
383 }
384
385 pca9685_read_reg(pca, PCA9685_PRESCALE, &val);
386 if (prescale != val) {
387 if (!pca9685_prescaler_can_change(pca, pwm->hwpwm)) {
388 dev_err(chip->dev,
389 "pwm not changed: periods of enabled pwms must match!\n");
390 return -EBUSY;
391 }
392
393 /*
394 * Putting the chip briefly into SLEEP mode
395 * at this point won't interfere with the
396 * pm_runtime framework, because the pm_runtime
397 * state is guaranteed active here.
398 */
399 /* Put chip into sleep mode */
400 pca9685_set_sleep_mode(pca, true);
401
402 /* Change the chip-wide output frequency */
403 pca9685_write_reg(pca, PCA9685_PRESCALE, prescale);
404
405 /* Wake the chip up */
406 pca9685_set_sleep_mode(pca, false);
407 }
408
409 duty = PCA9685_COUNTER_RANGE * state->duty_cycle;
410 duty = DIV_ROUND_UP_ULL(duty, state->period);
411 pca9685_pwm_set_duty(pca, pwm->hwpwm, duty);
412 return 0;
413}
414
415static int pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
416 const struct pwm_state *state)
417{
418 struct pca9685 *pca = to_pca(chip);
419 int ret;
420
421 mutex_lock(&pca->lock);
422 ret = __pca9685_pwm_apply(chip, pwm, state);
423 if (ret == 0) {
424 if (state->enabled)
425 set_bit(pwm->hwpwm, pca->pwms_enabled);
426 else
427 clear_bit(pwm->hwpwm, pca->pwms_enabled);
428 }
429 mutex_unlock(&pca->lock);
430
431 return ret;
432}
433
434static int pca9685_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
435 struct pwm_state *state)
436{
437 struct pca9685 *pca = to_pca(chip);
438 unsigned long long duty;
439 unsigned int val = 0;
440
441 /* Calculate (chip-wide) period from prescale value */
442 pca9685_read_reg(pca, PCA9685_PRESCALE, &val);
443 /*
444 * PCA9685_OSC_CLOCK_MHZ is 25, i.e. an integer divider of 1000.
445 * The following calculation is therefore only a multiplication
446 * and we are not losing precision.
447 */
448 state->period = (PCA9685_COUNTER_RANGE * 1000 / PCA9685_OSC_CLOCK_MHZ) *
449 (val + 1);
450
451 /* The (per-channel) polarity is fixed */
452 state->polarity = PWM_POLARITY_NORMAL;
453
454 if (pwm->hwpwm >= PCA9685_MAXCHAN) {
455 /*
456 * The "all LEDs" channel does not support HW readout
457 * Return 0 and disabled for backwards compatibility
458 */
459 state->duty_cycle = 0;
460 state->enabled = false;
461 return 0;
462 }
463
464 state->enabled = true;
465 duty = pca9685_pwm_get_duty(pca, pwm->hwpwm);
466 state->duty_cycle = DIV_ROUND_DOWN_ULL(duty * state->period, PCA9685_COUNTER_RANGE);
467
468 return 0;
469}
470
471static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
472{
473 struct pca9685 *pca = to_pca(chip);
474
475 if (pca9685_pwm_test_and_set_inuse(pca, pwm->hwpwm))
476 return -EBUSY;
477
478 if (pwm->hwpwm < PCA9685_MAXCHAN) {
479 /* PWMs - except the "all LEDs" channel - default to enabled */
480 mutex_lock(&pca->lock);
481 set_bit(pwm->hwpwm, pca->pwms_enabled);
482 mutex_unlock(&pca->lock);
483 }
484
485 pm_runtime_get_sync(chip->dev);
486
487 return 0;
488}
489
490static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
491{
492 struct pca9685 *pca = to_pca(chip);
493
494 mutex_lock(&pca->lock);
495 pca9685_pwm_set_duty(pca, pwm->hwpwm, 0);
496 clear_bit(pwm->hwpwm, pca->pwms_enabled);
497 mutex_unlock(&pca->lock);
498
499 pm_runtime_put(chip->dev);
500 pca9685_pwm_clear_inuse(pca, pwm->hwpwm);
501}
502
503static const struct pwm_ops pca9685_pwm_ops = {
504 .apply = pca9685_pwm_apply,
505 .get_state = pca9685_pwm_get_state,
506 .request = pca9685_pwm_request,
507 .free = pca9685_pwm_free,
508};
509
510static const struct regmap_config pca9685_regmap_i2c_config = {
511 .reg_bits = 8,
512 .val_bits = 8,
513 .max_register = PCA9685_NUMREGS,
514 .cache_type = REGCACHE_NONE,
515};
516
517static int pca9685_pwm_probe(struct i2c_client *client)
518{
519 struct pca9685 *pca;
520 unsigned int reg;
521 int ret;
522
523 pca = devm_kzalloc(&client->dev, sizeof(*pca), GFP_KERNEL);
524 if (!pca)
525 return -ENOMEM;
526
527 pca->regmap = devm_regmap_init_i2c(client, &pca9685_regmap_i2c_config);
528 if (IS_ERR(pca->regmap)) {
529 ret = PTR_ERR(pca->regmap);
530 dev_err(&client->dev, "Failed to initialize register map: %d\n",
531 ret);
532 return ret;
533 }
534
535 i2c_set_clientdata(client, pca);
536
537 mutex_init(&pca->lock);
538
539 ret = pca9685_read_reg(pca, PCA9685_MODE2, ®);
540 if (ret)
541 return ret;
542
543 if (device_property_read_bool(&client->dev, "invert"))
544 reg |= MODE2_INVRT;
545 else
546 reg &= ~MODE2_INVRT;
547
548 if (device_property_read_bool(&client->dev, "open-drain"))
549 reg &= ~MODE2_OUTDRV;
550 else
551 reg |= MODE2_OUTDRV;
552
553 ret = pca9685_write_reg(pca, PCA9685_MODE2, reg);
554 if (ret)
555 return ret;
556
557 /* Disable all LED ALLCALL and SUBx addresses to avoid bus collisions */
558 pca9685_read_reg(pca, PCA9685_MODE1, ®);
559 reg &= ~(MODE1_ALLCALL | MODE1_SUB1 | MODE1_SUB2 | MODE1_SUB3);
560 pca9685_write_reg(pca, PCA9685_MODE1, reg);
561
562 /* Reset OFF/ON registers to POR default */
563 pca9685_write_reg(pca, PCA9685_ALL_LED_OFF_L, 0);
564 pca9685_write_reg(pca, PCA9685_ALL_LED_OFF_H, LED_FULL);
565 pca9685_write_reg(pca, PCA9685_ALL_LED_ON_L, 0);
566 pca9685_write_reg(pca, PCA9685_ALL_LED_ON_H, LED_FULL);
567
568 pca->chip.ops = &pca9685_pwm_ops;
569 /* Add an extra channel for ALL_LED */
570 pca->chip.npwm = PCA9685_MAXCHAN + 1;
571
572 pca->chip.dev = &client->dev;
573
574 ret = pwmchip_add(&pca->chip);
575 if (ret < 0)
576 return ret;
577
578 ret = pca9685_pwm_gpio_probe(pca);
579 if (ret < 0) {
580 pwmchip_remove(&pca->chip);
581 return ret;
582 }
583
584 pm_runtime_enable(&client->dev);
585
586 if (pm_runtime_enabled(&client->dev)) {
587 /*
588 * Although the chip comes out of power-up in the sleep state,
589 * we force it to sleep in case it was woken up before
590 */
591 pca9685_set_sleep_mode(pca, true);
592 pm_runtime_set_suspended(&client->dev);
593 } else {
594 /* Wake the chip up if runtime PM is disabled */
595 pca9685_set_sleep_mode(pca, false);
596 }
597
598 return 0;
599}
600
601static void pca9685_pwm_remove(struct i2c_client *client)
602{
603 struct pca9685 *pca = i2c_get_clientdata(client);
604
605 pwmchip_remove(&pca->chip);
606
607 if (!pm_runtime_enabled(&client->dev)) {
608 /* Put chip in sleep state if runtime PM is disabled */
609 pca9685_set_sleep_mode(pca, true);
610 }
611
612 pm_runtime_disable(&client->dev);
613}
614
615static int __maybe_unused pca9685_pwm_runtime_suspend(struct device *dev)
616{
617 struct i2c_client *client = to_i2c_client(dev);
618 struct pca9685 *pca = i2c_get_clientdata(client);
619
620 pca9685_set_sleep_mode(pca, true);
621 return 0;
622}
623
624static int __maybe_unused pca9685_pwm_runtime_resume(struct device *dev)
625{
626 struct i2c_client *client = to_i2c_client(dev);
627 struct pca9685 *pca = i2c_get_clientdata(client);
628
629 pca9685_set_sleep_mode(pca, false);
630 return 0;
631}
632
633static const struct i2c_device_id pca9685_id[] = {
634 { "pca9685", 0 },
635 { /* sentinel */ },
636};
637MODULE_DEVICE_TABLE(i2c, pca9685_id);
638
639#ifdef CONFIG_ACPI
640static const struct acpi_device_id pca9685_acpi_ids[] = {
641 { "INT3492", 0 },
642 { /* sentinel */ },
643};
644MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids);
645#endif
646
647#ifdef CONFIG_OF
648static const struct of_device_id pca9685_dt_ids[] = {
649 { .compatible = "nxp,pca9685-pwm", },
650 { /* sentinel */ }
651};
652MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
653#endif
654
655static const struct dev_pm_ops pca9685_pwm_pm = {
656 SET_RUNTIME_PM_OPS(pca9685_pwm_runtime_suspend,
657 pca9685_pwm_runtime_resume, NULL)
658};
659
660static struct i2c_driver pca9685_i2c_driver = {
661 .driver = {
662 .name = "pca9685-pwm",
663 .acpi_match_table = ACPI_PTR(pca9685_acpi_ids),
664 .of_match_table = of_match_ptr(pca9685_dt_ids),
665 .pm = &pca9685_pwm_pm,
666 },
667 .probe = pca9685_pwm_probe,
668 .remove = pca9685_pwm_remove,
669 .id_table = pca9685_id,
670};
671
672module_i2c_driver(pca9685_i2c_driver);
673
674MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de>");
675MODULE_DESCRIPTION("PWM driver for PCA9685");
676MODULE_LICENSE("GPL");