Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# AMD network device configuration
4#
5
6config NET_VENDOR_AMD
7 bool "AMD devices"
8 default y
9 depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
10 SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
11 ISA || EISA || PCMCIA || ARM64
12 help
13 If you have a network (Ethernet) chipset belonging to this class,
14 say Y.
15
16 Note that the answer to this question does not directly affect
17 the kernel: saying N will just cause the configurator to skip all
18 the questions regarding AMD chipsets. If you say Y, you will be asked
19 for your specific chipset/driver in the following questions.
20
21if NET_VENDOR_AMD
22
23config A2065
24 tristate "A2065 support"
25 depends on ZORRO
26 select CRC32
27 help
28 If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
29 say N.
30
31 To compile this driver as a module, choose M here: the module
32 will be called a2065.
33
34config AMD8111_ETH
35 tristate "AMD 8111 (new PCI LANCE) support"
36 depends on PCI
37 select CRC32
38 select MII
39 help
40 If you have an AMD 8111-based PCI LANCE ethernet card,
41 answer Y here.
42
43 To compile this driver as a module, choose M here. The module
44 will be called amd8111e.
45
46config LANCE
47 tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
48 depends on ISA && ISA_DMA_API && !ARM && !PPC32
49 select NETDEV_LEGACY_INIT
50 help
51 If you have a network (Ethernet) card of this type, say Y here.
52 Some LinkSys cards are of this type.
53
54 To compile this driver as a module, choose M here: the module
55 will be called lance. This is recommended.
56
57config PCNET32
58 tristate "AMD PCnet32 PCI support"
59 depends on PCI && HAS_IOPORT
60 select CRC32
61 select MII
62 help
63 If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
64 answer Y here.
65
66 To compile this driver as a module, choose M here. The module
67 will be called pcnet32.
68
69config ARIADNE
70 tristate "Ariadne support"
71 depends on ZORRO
72 help
73 If you have a Village Tronic Ariadne Ethernet adapter, say Y.
74 Otherwise, say N.
75
76 To compile this driver as a module, choose M here: the module
77 will be called ariadne.
78
79config ATARILANCE
80 tristate "Atari LANCE support"
81 depends on ATARI
82 help
83 Say Y to include support for several Atari Ethernet adapters based
84 on the AMD LANCE chipset: RieblCard (with or without battery), or
85 PAMCard VME (also the version by Rhotron, with different addresses).
86
87config DECLANCE
88 tristate "DEC LANCE ethernet controller support"
89 depends on MACH_DECSTATION
90 select CRC32
91 help
92 This driver is for the series of Ethernet controllers produced by
93 DEC (now Compaq) based on the AMD LANCE chipset, including the
94 DEPCA series. (This chipset is better known via the NE2100 cards.)
95
96config HPLANCE
97 tristate "HP on-board LANCE support"
98 depends on DIO
99 select CRC32
100 help
101 If you want to use the builtin "LANCE" Ethernet controller on an
102 HP300 machine, say Y here.
103
104config MIPS_AU1X00_ENET
105 tristate "MIPS AU1000 Ethernet support"
106 depends on MIPS_ALCHEMY
107 select PHYLIB
108 select CRC32
109 help
110 If you have an Alchemy Semi AU1X00 based system
111 say Y. Otherwise, say N.
112
113config MVME147_NET
114 tristate "MVME147 (LANCE) Ethernet support"
115 depends on MVME147
116 select CRC32
117 help
118 Support for the on-board Ethernet interface on the Motorola MVME147
119 single-board computer. Say Y here to include the
120 driver for this chip in your kernel.
121 To compile this driver as a module, choose M here.
122
123config PCMCIA_NMCLAN
124 tristate "New Media PCMCIA support"
125 depends on PCMCIA && HAS_IOPORT
126 help
127 Say Y here if you intend to attach a New Media Ethernet or LiveWire
128 PCMCIA (PC-card) Ethernet card to your computer.
129
130 To compile this driver as a module, choose M here: the module will be
131 called nmclan_cs. If unsure, say N.
132
133config SUN3LANCE
134 tristate "Sun3/Sun3x on-board LANCE support"
135 depends on (SUN3 || SUN3X)
136 help
137 Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
138 featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
139 here to compile in the Linux driver for this and enable Ethernet.
140 General Linux information on the Sun 3 and 3x series (now
141 discontinued) is at
142 <http://www.angelfire.com/ca2/tech68k/sun3.html>.
143
144 If you're not building a kernel for a Sun 3, say N.
145
146config SUNLANCE
147 tristate "Sun LANCE support"
148 depends on SBUS
149 select CRC32
150 help
151 This driver supports the "le" interface present on all 32-bit Sparc
152 systems, on some older Ultra systems and as an Sbus option. These
153 cards are based on the AMD LANCE chipset, which is better known
154 via the NE2100 cards.
155
156 To compile this driver as a module, choose M here: the module
157 will be called sunlance.
158
159config AMD_XGBE
160 tristate "AMD 10GbE Ethernet driver"
161 depends on (OF_ADDRESS || ACPI || PCI) && HAS_IOMEM
162 depends on X86 || ARM64 || COMPILE_TEST
163 depends on PTP_1588_CLOCK_OPTIONAL
164 select BITREVERSE
165 select CRC32
166 select PHYLIB
167 select AMD_XGBE_HAVE_ECC if X86
168 help
169 This driver supports the AMD 10GbE Ethernet device found on an
170 AMD SoC.
171
172 To compile this driver as a module, choose M here: the module
173 will be called amd-xgbe.
174
175config AMD_XGBE_DCB
176 bool "Data Center Bridging (DCB) support"
177 default n
178 depends on AMD_XGBE && DCB
179 help
180 Say Y here to enable Data Center Bridging (DCB) support in the
181 driver.
182
183 If unsure, say N.
184
185config AMD_XGBE_HAVE_ECC
186 bool
187 default n
188
189config PDS_CORE
190 tristate "AMD/Pensando Data Systems Core Device Support"
191 depends on 64BIT && PCI
192 select AUXILIARY_BUS
193 select NET_DEVLINK
194 help
195 This enables the support for the AMD/Pensando Core device family of
196 adapters. More specific information on this driver can be
197 found in
198 <file:Documentation/networking/device_drivers/ethernet/amd/pds_core.rst>.
199
200 To compile this driver as a module, choose M here. The module
201 will be called pds_core.
202
203endif # NET_VENDOR_AMD
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# AMD network device configuration
4#
5
6config NET_VENDOR_AMD
7 bool "AMD devices"
8 default y
9 depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
10 SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
11 ISA || EISA || PCMCIA || ARM64
12 help
13 If you have a network (Ethernet) chipset belonging to this class,
14 say Y.
15
16 Note that the answer to this question does not directly affect
17 the kernel: saying N will just cause the configurator to skip all
18 the questions regarding AMD chipsets. If you say Y, you will be asked
19 for your specific chipset/driver in the following questions.
20
21if NET_VENDOR_AMD
22
23config A2065
24 tristate "A2065 support"
25 depends on ZORRO
26 select CRC32
27 help
28 If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
29 say N.
30
31 To compile this driver as a module, choose M here: the module
32 will be called a2065.
33
34config AMD8111_ETH
35 tristate "AMD 8111 (new PCI LANCE) support"
36 depends on PCI
37 select CRC32
38 select MII
39 help
40 If you have an AMD 8111-based PCI LANCE ethernet card,
41 answer Y here.
42
43 To compile this driver as a module, choose M here. The module
44 will be called amd8111e.
45
46config LANCE
47 tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
48 depends on ISA && ISA_DMA_API && !ARM && !PPC32
49 select NETDEV_LEGACY_INIT
50 help
51 If you have a network (Ethernet) card of this type, say Y here.
52 Some LinkSys cards are of this type.
53
54 To compile this driver as a module, choose M here: the module
55 will be called lance. This is recommended.
56
57config PCNET32
58 tristate "AMD PCnet32 PCI support"
59 depends on PCI
60 select CRC32
61 select MII
62 help
63 If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
64 answer Y here.
65
66 To compile this driver as a module, choose M here. The module
67 will be called pcnet32.
68
69config ARIADNE
70 tristate "Ariadne support"
71 depends on ZORRO
72 help
73 If you have a Village Tronic Ariadne Ethernet adapter, say Y.
74 Otherwise, say N.
75
76 To compile this driver as a module, choose M here: the module
77 will be called ariadne.
78
79config ATARILANCE
80 tristate "Atari LANCE support"
81 depends on ATARI
82 help
83 Say Y to include support for several Atari Ethernet adapters based
84 on the AMD LANCE chipset: RieblCard (with or without battery), or
85 PAMCard VME (also the version by Rhotron, with different addresses).
86
87config DECLANCE
88 tristate "DEC LANCE ethernet controller support"
89 depends on MACH_DECSTATION
90 select CRC32
91 help
92 This driver is for the series of Ethernet controllers produced by
93 DEC (now Compaq) based on the AMD LANCE chipset, including the
94 DEPCA series. (This chipset is better known via the NE2100 cards.)
95
96config HPLANCE
97 tristate "HP on-board LANCE support"
98 depends on DIO
99 select CRC32
100 help
101 If you want to use the builtin "LANCE" Ethernet controller on an
102 HP300 machine, say Y here.
103
104config MIPS_AU1X00_ENET
105 tristate "MIPS AU1000 Ethernet support"
106 depends on MIPS_ALCHEMY
107 select PHYLIB
108 select CRC32
109 help
110 If you have an Alchemy Semi AU1X00 based system
111 say Y. Otherwise, say N.
112
113config MVME147_NET
114 tristate "MVME147 (LANCE) Ethernet support"
115 depends on MVME147
116 select CRC32
117 help
118 Support for the on-board Ethernet interface on the Motorola MVME147
119 single-board computer. Say Y here to include the
120 driver for this chip in your kernel.
121 To compile this driver as a module, choose M here.
122
123config PCMCIA_NMCLAN
124 tristate "New Media PCMCIA support"
125 depends on PCMCIA
126 help
127 Say Y here if you intend to attach a New Media Ethernet or LiveWire
128 PCMCIA (PC-card) Ethernet card to your computer.
129
130 To compile this driver as a module, choose M here: the module will be
131 called nmclan_cs. If unsure, say N.
132
133config SUN3LANCE
134 tristate "Sun3/Sun3x on-board LANCE support"
135 depends on (SUN3 || SUN3X)
136 help
137 Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
138 featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
139 here to compile in the Linux driver for this and enable Ethernet.
140 General Linux information on the Sun 3 and 3x series (now
141 discontinued) is at
142 <http://www.angelfire.com/ca2/tech68k/sun3.html>.
143
144 If you're not building a kernel for a Sun 3, say N.
145
146config SUNLANCE
147 tristate "Sun LANCE support"
148 depends on SBUS
149 select CRC32
150 help
151 This driver supports the "le" interface present on all 32-bit Sparc
152 systems, on some older Ultra systems and as an Sbus option. These
153 cards are based on the AMD LANCE chipset, which is better known
154 via the NE2100 cards.
155
156 To compile this driver as a module, choose M here: the module
157 will be called sunlance.
158
159config AMD_XGBE
160 tristate "AMD 10GbE Ethernet driver"
161 depends on (OF_ADDRESS || ACPI || PCI) && HAS_IOMEM
162 depends on X86 || ARM64 || COMPILE_TEST
163 depends on PTP_1588_CLOCK_OPTIONAL
164 select BITREVERSE
165 select CRC32
166 select PHYLIB
167 select AMD_XGBE_HAVE_ECC if X86
168 help
169 This driver supports the AMD 10GbE Ethernet device found on an
170 AMD SoC.
171
172 To compile this driver as a module, choose M here: the module
173 will be called amd-xgbe.
174
175config AMD_XGBE_DCB
176 bool "Data Center Bridging (DCB) support"
177 default n
178 depends on AMD_XGBE && DCB
179 help
180 Say Y here to enable Data Center Bridging (DCB) support in the
181 driver.
182
183 If unsure, say N.
184
185config AMD_XGBE_HAVE_ECC
186 bool
187 default n
188
189config PDS_CORE
190 tristate "AMD/Pensando Data Systems Core Device Support"
191 depends on 64BIT && PCI
192 select AUXILIARY_BUS
193 select NET_DEVLINK
194 help
195 This enables the support for the AMD/Pensando Core device family of
196 adapters. More specific information on this driver can be
197 found in
198 <file:Documentation/networking/device_drivers/ethernet/amd/pds_core.rst>.
199
200 To compile this driver as a module, choose M here. The module
201 will be called pds_core.
202
203endif # NET_VENDOR_AMD