1# SPDX-License-Identifier: GPL-2.0-only
   2#
   3# Hardware monitoring chip drivers configuration
   4#
   5
   6menuconfig HWMON
   7	tristate "Hardware Monitoring support"
   8	depends on HAS_IOMEM
   9	default y
  10	help
  11	  Hardware monitoring devices let you monitor the hardware health
  12	  of a system. Most modern motherboards include such a device. It
  13	  can include temperature sensors, voltage sensors, fan speed
  14	  sensors and various additional features such as the ability to
  15	  control the speed of the fans. If you want this support you
  16	  should say Y here and also to the specific driver(s) for your
  17	  sensors chip(s) below.
  18
  19	  To find out which specific driver(s) you need, use the
  20	  sensors-detect script from the lm_sensors package.  Read
  21	  <file:Documentation/hwmon/userspace-tools.rst> for details.
  22
  23	  This support can also be built as a module. If so, the module
  24	  will be called hwmon.
  25
  26if HWMON
  27
  28config HWMON_VID
  29	tristate
  30
  31config HWMON_DEBUG_CHIP
  32	bool "Hardware Monitoring Chip debugging messages"
  33	help
  34	  Say Y here if you want the I2C chip drivers to produce a bunch of
  35	  debug messages to the system log.  Select this if you are having
  36	  a problem with I2C support and want to see more of what is going
  37	  on.
  38
  39comment "Native drivers"
  40
  41config SENSORS_ABITUGURU
  42	tristate "Abit uGuru (rev 1 & 2)"
  43	depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT
  44	help
  45	  If you say yes here you get support for the sensor part of the first
  46	  and second revision of the Abit uGuru chip. The voltage and frequency
  47	  control parts of the Abit uGuru are not supported. The Abit uGuru
  48	  chip can be found on Abit uGuru featuring motherboards (most modern
  49	  Abit motherboards from before end 2005). For more info and a list
  50	  of which motherboards have which revision see
  51	  Documentation/hwmon/abituguru.rst
  52
  53	  This driver can also be built as a module. If so, the module
  54	  will be called abituguru.
  55
  56config SENSORS_ABITUGURU3
  57	tristate "Abit uGuru (rev 3)"
  58	depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT
  59	help
  60	  If you say yes here you get support for the sensor part of the
  61	  third revision of the Abit uGuru chip. Only reading the sensors
  62	  and their settings is supported. The third revision of the Abit
  63	  uGuru chip can be found on recent Abit motherboards (since end
  64	  2005). For more info and a list of which motherboards have which
  65	  revision see Documentation/hwmon/abituguru3.rst
  66
  67	  This driver can also be built as a module. If so, the module
  68	  will be called abituguru3.
  69
  70config SENSORS_SMPRO
  71	tristate "Ampere's Altra SMpro hardware monitoring driver"
  72	depends on MFD_SMPRO
  73	help
  74	  If you say yes here you get support for the thermal, voltage,
  75	  current and power sensors of Ampere's Altra processor family SoC
  76	  with SMpro co-processor.
  77
  78config SENSORS_AD7314
  79	tristate "Analog Devices AD7314 and compatibles"
  80	depends on SPI
  81	help
  82	  If you say yes here you get support for the Analog Devices
  83	  AD7314, ADT7301 and ADT7302 temperature sensors.
  84
  85	  This driver can also be built as a module. If so, the module
  86	  will be called ad7314.
  87
  88config SENSORS_AD7414
  89	tristate "Analog Devices AD7414"
  90	depends on I2C
  91	help
  92	  If you say yes here you get support for the Analog Devices
  93	  AD7414 temperature monitoring chip.
  94
  95	  This driver can also be built as a module. If so, the module
  96	  will be called ad7414.
  97
  98config SENSORS_AD7418
  99	tristate "Analog Devices AD7416, AD7417 and AD7418"
 100	depends on I2C
 101	help
 102	  If you say yes here you get support for the Analog Devices
 103	  AD7416, AD7417 and AD7418 temperature monitoring chips.
 104
 105	  This driver can also be built as a module. If so, the module
 106	  will be called ad7418.
 107
 
 
 
 
 
 
 
 
 
 
 
 
 108config SENSORS_ADM1025
 109	tristate "Analog Devices ADM1025 and compatibles"
 110	depends on I2C
 111	select HWMON_VID
 112	help
 113	  If you say yes here you get support for Analog Devices ADM1025
 114	  and Philips NE1619 sensor chips.
 115
 116	  This driver can also be built as a module. If so, the module
 117	  will be called adm1025.
 118
 119config SENSORS_ADM1026
 120	tristate "Analog Devices ADM1026 and compatibles"
 121	depends on I2C
 122	select HWMON_VID
 123	help
 124	  If you say yes here you get support for Analog Devices ADM1026
 125	  sensor chip.
 126
 127	  This driver can also be built as a module. If so, the module
 128	  will be called adm1026.
 129
 130config SENSORS_ADM1029
 131	tristate "Analog Devices ADM1029"
 132	depends on I2C
 133	help
 134	  If you say yes here you get support for Analog Devices ADM1029
 135	  sensor chip.
 136	  Very rare chip, please let us know you use it.
 137
 138	  This driver can also be built as a module. If so, the module
 139	  will be called adm1029.
 140
 141config SENSORS_ADM1031
 142	tristate "Analog Devices ADM1031 and compatibles"
 143	depends on I2C
 144	help
 145	  If you say yes here you get support for Analog Devices ADM1031
 146	  and ADM1030 sensor chips.
 147
 148	  This driver can also be built as a module. If so, the module
 149	  will be called adm1031.
 150
 151config SENSORS_ADM1177
 152	tristate "Analog Devices ADM1177 and compatibles"
 153	depends on I2C
 154	help
 155	  If you say yes here you get support for Analog Devices ADM1177
 156	  sensor chips.
 157
 158	  This driver can also be built as a module.  If so, the module
 159	  will be called adm1177.
 160
 161config SENSORS_ADM9240
 162	tristate "Analog Devices ADM9240 and compatibles"
 163	depends on I2C
 164	select HWMON_VID
 165	select REGMAP_I2C
 166	help
 167	  If you say yes here you get support for Analog Devices ADM9240,
 168	  Dallas DS1780, National Semiconductor LM81 sensor chips.
 169
 170	  This driver can also be built as a module. If so, the module
 171	  will be called adm9240.
 172
 173config SENSORS_ADT7X10
 174	tristate
 175	select REGMAP
 176	help
 177	  This module contains common code shared by the ADT7310/ADT7320 and
 178	  ADT7410/ADT7420 temperature monitoring chip drivers.
 179
 180	  If built as a module, the module will be called adt7x10.
 181
 182config SENSORS_ADT7310
 183	tristate "Analog Devices ADT7310/ADT7320"
 184	depends on SPI_MASTER
 185	select SENSORS_ADT7X10
 186	help
 187	  If you say yes here you get support for the Analog Devices
 188	  ADT7310 and ADT7320 temperature monitoring chips.
 189
 190	  This driver can also be built as a module. If so, the module
 191	  will be called adt7310.
 192
 193config SENSORS_ADT7410
 194	tristate "Analog Devices ADT7410/ADT7420"
 195	depends on I2C
 196	select SENSORS_ADT7X10
 197	help
 198	  If you say yes here you get support for the Analog Devices
 199	  ADT7410 and ADT7420 temperature monitoring chips.
 200
 201	  This driver can also be built as a module. If so, the module
 202	  will be called adt7410.
 203
 204config SENSORS_ADT7411
 205	tristate "Analog Devices ADT7411"
 206	depends on I2C
 207	help
 208	  If you say yes here you get support for the Analog Devices
 209	  ADT7411 voltage and temperature monitoring chip.
 210
 211	  This driver can also be built as a module. If so, the module
 212	  will be called adt7411.
 213
 214config SENSORS_ADT7462
 215	tristate "Analog Devices ADT7462"
 216	depends on I2C
 217	help
 218	  If you say yes here you get support for the Analog Devices
 219	  ADT7462 temperature monitoring chips.
 220
 221	  This driver can also be built as a module. If so, the module
 222	  will be called adt7462.
 223
 224config SENSORS_ADT7470
 225	tristate "Analog Devices ADT7470"
 226	depends on I2C
 227	select REGMAP_I2C
 228	help
 229	  If you say yes here you get support for the Analog Devices
 230	  ADT7470 temperature monitoring chips.
 231
 232	  This driver can also be built as a module. If so, the module
 233	  will be called adt7470.
 234
 235config SENSORS_ADT7475
 236	tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 237	depends on I2C
 238	select HWMON_VID
 239	help
 240	  If you say yes here you get support for the Analog Devices
 241	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 242	  chips.
 243
 244	  This driver can also be built as a module. If so, the module
 245	  will be called adt7475.
 246
 247config SENSORS_AHT10
 248	tristate "Aosong AHT10, AHT20"
 249	depends on I2C
 250	select CRC8
 251	help
 252	  If you say yes here, you get support for the Aosong AHT10 and AHT20
 253	  temperature and humidity sensors
 254
 255	  This driver can also be built as a module. If so, the module
 256	  will be called aht10.
 257
 258config SENSORS_AQUACOMPUTER_D5NEXT
 259	tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next"
 260	depends on USB_HID
 261	select CRC16
 262	help
 263	  If you say yes here you get support for sensors and fans of
 264	  the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan
 265	  controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow
 266	  Next sensor, where available.
 267
 268	  This driver can also be built as a module. If so, the module
 269	  will be called aquacomputer_d5next.
 270
 271config SENSORS_AS370
 272	tristate "Synaptics AS370 SoC hardware monitoring driver"
 273	help
 274	  If you say yes here you get support for the PVT sensors of
 275	  the Synaptics AS370 SoC
 276
 277	  This driver can also be built as a module. If so, the module
 278	  will be called as370-hwmon.
 279
 280
 281config SENSORS_ASC7621
 282	tristate "Andigilog aSC7621"
 283	depends on I2C
 284	help
 285	  If you say yes here you get support for the aSC7621
 286	  family of SMBus sensors chip found on most Intel X38, X48, X58,
 287	  945, 965 and 975 desktop boards.  Currently supported chips:
 288	  aSC7621
 289	  aSC7621a
 290
 291	  This driver can also be built as a module. If so, the module
 292	  will be called asc7621.
 293
 294config SENSORS_ASUS_ROG_RYUJIN
 295	tristate "ASUS ROG RYUJIN II 360 hardware monitoring driver"
 296	depends on HID
 297	help
 298	  If you say yes here you get support for the fans and sensors of
 299	  the ASUS ROG RYUJIN II 360 AIO CPU liquid cooler.
 300
 301	  This driver can also be built as a module. If so, the module
 302	  will be called asus_rog_ryujin.
 303
 304config SENSORS_AXI_FAN_CONTROL
 305	tristate "Analog Devices FAN Control HDL Core driver"
 306	help
 307	  If you say yes here you get support for the Analog Devices
 308	  AXI HDL FAN monitoring core.
 309
 310	  This driver can also be built as a module. If so, the module
 311	  will be called axi-fan-control
 312
 313config SENSORS_K8TEMP
 314	tristate "AMD Athlon64/FX or Opteron temperature sensor"
 315	depends on X86 && PCI
 316	help
 317	  If you say yes here you get support for the temperature
 318	  sensor(s) inside your CPU. Supported is whole AMD K8
 319	  microarchitecture. Please note that you will need at least
 320	  lm-sensors 2.10.1 for proper userspace support.
 321
 322	  This driver can also be built as a module. If so, the module
 323	  will be called k8temp.
 324
 325config SENSORS_K10TEMP
 326	tristate "AMD Family 10h+ temperature sensor"
 327	depends on X86 && PCI && AMD_NB
 328	help
 329	  If you say yes here you get support for the temperature
 330	  sensor(s) inside your CPU. Supported are later revisions of
 331	  the AMD Family 10h and all revisions of the AMD Family 11h,
 332	  12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)
 333	  and 16h (Kabini/Mullins) microarchitectures.
 334
 335	  This driver can also be built as a module. If so, the module
 336	  will be called k10temp.
 337
 338config SENSORS_FAM15H_POWER
 339	tristate "AMD Family 15h processor power"
 340	depends on X86 && PCI && CPU_SUP_AMD
 341	help
 342	  If you say yes here you get support for processor power
 343	  information of your AMD family 15h CPU.
 344
 345	  This driver can also be built as a module. If so, the module
 346	  will be called fam15h_power.
 347
 348config SENSORS_APPLESMC
 349	tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
 350	depends on INPUT && X86
 351	select NEW_LEDS
 352	select LEDS_CLASS
 353	help
 354	  This driver provides support for the Apple System Management
 355	  Controller, which provides an accelerometer (Apple Sudden Motion
 356	  Sensor), light sensors, temperature sensors, keyboard backlight
 357	  control and fan control.
 358
 359	  Only Intel-based Apple's computers are supported (MacBook Pro,
 360	  MacBook, MacMini).
 361
 362	  Data from the different sensors, keyboard backlight control and fan
 363	  control are accessible via sysfs.
 364
 365	  This driver also provides an absolute input class device, allowing
 366	  the laptop to act as a pinball machine-esque joystick.
 367
 368	  Say Y here if you have an applicable laptop and want to experience
 369	  the awesome power of applesmc.
 370
 371config SENSORS_ARM_SCMI
 372	tristate "ARM SCMI Sensors"
 373	depends on ARM_SCMI_PROTOCOL
 374	depends on THERMAL || !THERMAL_OF
 375	help
 376	  This driver provides support for temperature, voltage, current
 377	  and power sensors available on SCMI based platforms. The actual
 378	  number and type of sensors exported depend on the platform.
 379
 380	  This driver can also be built as a module. If so, the module
 381	  will be called scmi-hwmon.
 382
 383config SENSORS_ARM_SCPI
 384	tristate "ARM SCPI Sensors"
 385	depends on ARM_SCPI_PROTOCOL
 386	depends on THERMAL || !THERMAL_OF
 387	help
 388	  This driver provides support for temperature, voltage, current
 389	  and power sensors available on ARM Ltd's SCP based platforms. The
 390	  actual number and type of sensors exported depend on the platform.
 391
 392config SENSORS_ASB100
 393	tristate "Asus ASB100 Bach"
 394	depends on (X86 || COMPILE_TEST) && I2C
 395	select HWMON_VID
 396	help
 397	  If you say yes here you get support for the ASB100 Bach sensor
 398	  chip found on some Asus mainboards.
 399
 400	  This driver can also be built as a module. If so, the module
 401	  will be called asb100.
 402
 403config SENSORS_ASPEED
 404	tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"
 405	depends on ARCH_ASPEED || COMPILE_TEST
 406	depends on THERMAL || THERMAL=n
 407	select REGMAP
 408	help
 409	  This driver provides support for ASPEED AST2400/AST2500 PWM
 410	  and Fan Tacho controllers.
 411
 412	  This driver can also be built as a module. If so, the module
 413	  will be called aspeed_pwm_tacho.
 414
 415config SENSORS_ASPEED_G6
 416	tristate "ASPEED G6 PWM and Fan tach driver"
 417	depends on ARCH_ASPEED || COMPILE_TEST
 418	depends on PWM
 419	help
 420	  This driver provides support for ASPEED G6 PWM and Fan Tach
 421	  controllers.
 422
 423	  This driver can also be built as a module. If so, the module
 424	  will be called aspeed_g6_pwm_tach.
 425
 426config SENSORS_ATXP1
 427	tristate "Attansic ATXP1 VID controller"
 428	depends on I2C
 429	select HWMON_VID
 430	help
 431	  If you say yes here you get support for the Attansic ATXP1 VID
 432	  controller.
 433
 434	  If your board have such a chip, you are able to control your CPU
 435	  core and other voltages.
 436
 437	  This driver can also be built as a module. If so, the module
 438	  will be called atxp1.
 439
 440config SENSORS_BT1_PVT
 441	tristate "Baikal-T1 Process, Voltage, Temperature sensor driver"
 442	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
 443	select POLYNOMIAL
 444	help
 445	  If you say yes here you get support for Baikal-T1 PVT sensor
 446	  embedded into the SoC.
 447
 448	  This driver can also be built as a module. If so, the module will be
 449	  called bt1-pvt.
 450
 451config SENSORS_BT1_PVT_ALARMS
 452	bool "Enable Baikal-T1 PVT sensor alarms"
 453	depends on SENSORS_BT1_PVT
 454	help
 455	  Baikal-T1 PVT IP-block provides threshold registers for each
 456	  supported sensor. But the corresponding interrupts might be
 457	  generated by the thresholds comparator only in synchronization with
 458	  a data conversion. Additionally there is only one sensor data can
 459	  be converted at a time. All of these makes the interface impossible
 460	  to be used for the hwmon alarms implementation without periodic
 461	  switch between the PVT sensors. By default the data conversion is
 462	  performed on demand from the user-space. If this config is enabled
 463	  the data conversion will be periodically performed and the data will be
 464	  saved in the internal driver cache.
 465
 466config SENSORS_CHIPCAP2
 467	tristate "Amphenol ChipCap 2 relative humidity and temperature sensor"
 468	depends on I2C
 469	help
 470	  Say yes here to build support for the Amphenol ChipCap 2
 471	  relative humidity and temperature sensor.
 472
 473	  To compile this driver as a module, choose M here: the module
 474	  will be called chipcap2.
 475
 476config SENSORS_CORSAIR_CPRO
 477	tristate "Corsair Commander Pro controller"
 478	depends on HID
 479	help
 480	  If you say yes here you get support for the Corsair Commander Pro
 481	  controller.
 482
 483	  This driver can also be built as a module. If so, the module
 484	  will be called corsair-cpro.
 485
 486config SENSORS_CORSAIR_PSU
 487	tristate "Corsair PSU HID controller"
 488	depends on HID
 489	help
 490	  If you say yes here you get support for Corsair PSUs with a HID
 491	  interface.
 492	  Currently this driver supports the (RM/HX)550i, (RM/HX)650i,
 493	  (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies
 494	  by Corsair.
 495
 496	  This driver can also be built as a module. If so, the module
 497	  will be called corsair-psu.
 498
 499config SENSORS_CROS_EC
 500	tristate "ChromeOS Embedded Controller sensors"
 501	depends on MFD_CROS_EC_DEV
 502	default MFD_CROS_EC_DEV
 503	help
 504	  If you say yes here you get support for ChromeOS Embedded Controller
 505	  sensors.
 506
 507	  This driver can also be built as a module. If so, the module
 508	  will be called cros_ec_hwmon.
 509
 510config SENSORS_DRIVETEMP
 511	tristate "Hard disk drives with temperature sensors"
 512	depends on SCSI && ATA
 513	help
 514	  If you say yes you get support for the temperature sensor on
 515	  hard disk drives.
 516
 517	  This driver can also be built as a module. If so, the module
 518	  will be called drivetemp.
 519
 520config SENSORS_DS620
 521	tristate "Dallas Semiconductor DS620"
 522	depends on I2C
 523	help
 524	  If you say yes here you get support for Dallas Semiconductor
 525	  DS620 sensor chip.
 526
 527	  This driver can also be built as a module. If so, the module
 528	  will be called ds620.
 529
 530config SENSORS_DS1621
 531	tristate "Dallas Semiconductor DS1621 and compatibles"
 532	depends on I2C
 533	help
 534	  If you say yes here you get support for Dallas Semiconductor/Maxim
 535	  Integrated DS1621 sensor chips and compatible models including:
 536
 537	  - Dallas Semiconductor DS1625
 538	  - Maxim Integrated DS1631
 539	  - Maxim Integrated DS1721
 540	  - Maxim Integrated DS1731
 541
 542	  This driver can also be built as a module. If so, the module
 543	  will be called ds1621.
 544
 545config SENSORS_DELL_SMM
 546	tristate "Dell laptop SMM BIOS hwmon driver"
 547	depends on ACPI_WMI
 548	depends on X86
 549	imply THERMAL
 550	help
 551	  This hwmon driver adds support for reporting temperature of different
 552	  sensors and controls the fans on Dell laptops via System Management
 553	  Mode provided by Dell BIOS.
 554
 555	  When option I8K is also enabled this driver provides legacy /proc/i8k
 556	  userspace interface for i8kutils package.
 557
 558config I8K
 559	bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver"
 560	depends on SENSORS_DELL_SMM
 561	depends on PROC_FS
 562	help
 563	  This option enables the legacy /proc/i8k userspace interface of the
 564	  dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS
 565	  version, temperatures and allows control of fan speeds of some Dell
 566	  laptops. Sometimes it also reports power and hotkey status.
 567
 568	  This interface is required to run programs from the i8kutils package.
 569
 570	  Say Y if you intend to run userspace programs that use this interface.
 571	  Say N otherwise.
 572
 573config SENSORS_DA9052_ADC
 574	tristate "Dialog DA9052/DA9053 ADC"
 575	depends on PMIC_DA9052
 576	help
 577	  Say y here to support the ADC found on Dialog Semiconductor
 578	  DA9052-BC and DA9053-AA/Bx PMICs.
 579
 580	  This driver can also be built as module. If so, the module
 581	  will be called da9052-hwmon.
 582
 583config SENSORS_DA9055
 584	tristate "Dialog Semiconductor DA9055 ADC"
 585	depends on MFD_DA9055
 586	help
 587	  If you say yes here you get support for ADC on the Dialog
 588	  Semiconductor DA9055 PMIC.
 589
 590	  This driver can also be built as a module. If so, the module
 591	  will be called da9055-hwmon.
 592
 593config SENSORS_I5K_AMB
 594	tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 595	depends on PCI
 596	help
 597	  If you say yes here you get support for FB-DIMM AMB temperature
 598	  monitoring chips on systems with the Intel 5000 series chipset.
 599
 600	  This driver can also be built as a module. If so, the module
 601	  will be called i5k_amb.
 602
 603config SENSORS_SPARX5
 604	tristate "Sparx5 SoC temperature sensor"
 605	depends on ARCH_SPARX5 || COMPILE_TEST
 606	help
 607	  If you say yes here you get support for temperature monitoring
 608	  with the Microchip Sparx5 SoC.
 609
 610	  This driver can also be built as a module. If so, the module
 611	  will be called sparx5-temp.
 612
 613config SENSORS_F71805F
 614	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 615	depends on HAS_IOPORT
 616	depends on !PPC
 617	help
 618	  If you say yes here you get support for hardware monitoring
 619	  features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 620	  Super-I/O chips.
 621
 622	  This driver can also be built as a module. If so, the module
 623	  will be called f71805f.
 624
 625config SENSORS_F71882FG
 626	tristate "Fintek F71882FG and compatibles"
 627	depends on HAS_IOPORT
 628	depends on !PPC
 629	help
 630	  If you say yes here you get support for hardware monitoring
 631	  features of many Fintek Super-I/O (LPC) chips. The currently
 632	  supported chips are:
 633	    F71808E/A
 634	    F71858FG
 635	    F71862FG
 636	    F71863FG
 637	    F71869F/E/A
 638	    F71882FG
 639	    F71883FG
 640	    F71889FG/ED/A
 641	    F8000
 642	    F81801U
 643	    F81865F
 644
 645	  This driver can also be built as a module. If so, the module
 646	  will be called f71882fg.
 647
 648config SENSORS_F75375S
 649	tristate "Fintek F75375S/SP, F75373 and F75387"
 650	depends on I2C
 651	help
 652	  If you say yes here you get support for hardware monitoring
 653	  features of the Fintek F75375S/SP, F75373 and F75387
 654
 655	  This driver can also be built as a module. If so, the module
 656	  will be called f75375s.
 657
 658config SENSORS_GSC
 659	tristate "Gateworks System Controller ADC"
 660	depends on MFD_GATEWORKS_GSC
 661	help
 662	  Support for the Gateworks System Controller A/D converters.
 663
 664	  To compile this driver as a module, choose M here:
 665	  the module will be called gsc-hwmon.
 666
 667config SENSORS_MC13783_ADC
 668        tristate "Freescale MC13783/MC13892 ADC"
 669        depends on MFD_MC13XXX
 670        help
 671          Support for the A/D converter on MC13783 and MC13892 PMIC.
 672
 673config SENSORS_FSCHMD
 674	tristate "Fujitsu Siemens Computers sensor chips"
 675	depends on (X86 || COMPILE_TEST) && I2C
 676	help
 677	  If you say yes here you get support for the following Fujitsu
 678	  Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 679	  Heimdall, Heracles, Hades and Syleus including support for the
 680	  integrated watchdog.
 681
 682	  This is a merged driver for FSC sensor chips replacing the fscpos,
 683	  fscscy and fscher drivers and adding support for several other FSC
 684	  sensor chips.
 685
 686	  This driver can also be built as a module. If so, the module
 687	  will be called fschmd.
 688
 689config SENSORS_FTSTEUTATES
 690	tristate "Fujitsu Technology Solutions sensor chip Teutates"
 691	depends on I2C && WATCHDOG
 692	select WATCHDOG_CORE
 693	help
 694	  If you say yes here you get support for the Fujitsu Technology
 695	  Solutions (FTS) sensor chip "Teutates" including support for
 696	  the integrated watchdog.
 697
 698	  This driver can also be built as a module. If so, the module
 699	  will be called ftsteutates.
 700
 701config SENSORS_GIGABYTE_WATERFORCE
 702	tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers"
 703	depends on USB_HID
 704	help
 705	  If you say yes here you get support for hardware monitoring for the
 706	  Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers.
 707
 708	  This driver can also be built as a module. If so, the module
 709	  will be called gigabyte_waterforce.
 710
 711config SENSORS_GL518SM
 712	tristate "Genesys Logic GL518SM"
 713	depends on I2C
 714	help
 715	  If you say yes here you get support for Genesys Logic GL518SM
 716	  sensor chips.
 717
 718	  This driver can also be built as a module. If so, the module
 719	  will be called gl518sm.
 720
 721config SENSORS_GL520SM
 722	tristate "Genesys Logic GL520SM"
 723	depends on I2C
 724	select HWMON_VID
 725	help
 726	  If you say yes here you get support for Genesys Logic GL520SM
 727	  sensor chips.
 728
 729	  This driver can also be built as a module. If so, the module
 730	  will be called gl520sm.
 731
 732config SENSORS_G760A
 733	tristate "GMT G760A"
 734	depends on I2C
 735	help
 736	  If you say yes here you get support for Global Mixed-mode
 737	  Technology Inc G760A fan speed PWM controller chips.
 738
 739	  This driver can also be built as a module. If so, the module
 740	  will be called g760a.
 741
 742config SENSORS_G762
 743	tristate "GMT G762 and G763"
 744	depends on I2C
 745	help
 746	  If you say yes here you get support for Global Mixed-mode
 747	  Technology Inc G762 and G763 fan speed PWM controller chips.
 748
 749	  This driver can also be built as a module. If so, the module
 750	  will be called g762.
 751
 752config SENSORS_GPIO_FAN
 753	tristate "GPIO fan"
 754	depends on OF_GPIO
 755	depends on GPIOLIB || COMPILE_TEST
 756	depends on THERMAL || THERMAL=n
 757	help
 758	  If you say yes here you get support for fans connected to GPIO lines.
 759
 760	  This driver can also be built as a module. If so, the module
 761	  will be called gpio-fan.
 762
 763config SENSORS_GXP_FAN_CTRL
 764	tristate "HPE GXP fan controller"
 765	depends on ARCH_HPE_GXP || COMPILE_TEST
 766	help
 767	  If you say yes here you get support for GXP fan control functionality.
 768
 769	  The GXP controls fan function via the CPLD through the use of PWM
 770	  registers. This driver reports status and pwm setting of the fans.
 771
 772config SENSORS_HIH6130
 773	tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
 774	depends on I2C
 775	help
 776	  If you say yes here you get support for Honeywell Humidicon
 777	  HIH-6130 and HIH-6131 Humidicon humidity sensors.
 778
 779	  This driver can also be built as a module. If so, the module
 780	  will be called hih6130.
 781
 782config SENSORS_HS3001
 783	tristate "Renesas HS3001 humidity and temperature sensors"
 784	depends on I2C
 785	help
 786	  If you say yes here you get support for the Renesas HS3001,
 787	  to HS3004 humidity and temperature sensors.
 788
 789	  This driver can also be built as a module. If so, the module
 790	  will be called hs3001.
 791
 792config SENSORS_IBMAEM
 793	tristate "IBM Active Energy Manager temperature/power sensors and control"
 794	select IPMI_SI
 795	depends on IPMI_HANDLER
 796	help
 797	  If you say yes here you get support for the temperature and
 798	  power sensors and capping hardware in various IBM System X
 799	  servers that support Active Energy Manager.  This includes
 800	  the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 801	  and certain HC10/HS2x/LS2x/QS2x blades.
 802
 803	  This driver can also be built as a module. If so, the module
 804	  will be called ibmaem.
 805
 806config SENSORS_IBMPEX
 807	tristate "IBM PowerExecutive temperature/power sensors"
 808	select IPMI_SI
 809	depends on IPMI_HANDLER
 810	help
 811	  If you say yes here you get support for the temperature and
 812	  power sensors in various IBM System X servers that support
 813	  PowerExecutive.  So far this includes the x3350, x3550, x3650,
 814	  x3655, and x3755; the x3800, x3850, and x3950 models that have
 815	  PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 816
 817	  This driver can also be built as a module. If so, the module
 818	  will be called ibmpex.
 819
 820config SENSORS_IBMPOWERNV
 821	tristate "IBM POWERNV platform sensors"
 822	depends on PPC_POWERNV
 823	default y
 824	help
 825	  If you say yes here you get support for the temperature/fan/power
 826	  sensors on your PowerNV platform.
 827
 828	  This driver can also be built as a module. If so, the module
 829	  will be called ibmpowernv.
 830
 831config SENSORS_IIO_HWMON
 832	tristate "Hwmon driver that uses channels specified via iio maps"
 833	depends on IIO
 834	help
 835	  This is a platform driver that in combination with a suitable
 836	  map allows IIO devices to provide basic hwmon functionality
 837	  for those channels specified in the map.  This map can be provided
 838	  either via platform data or the device tree bindings.
 839
 840config SENSORS_I5500
 841	tristate "Intel 5500/5520/X58 temperature sensor"
 842	depends on X86 && PCI
 843	help
 844	  If you say yes here you get support for the temperature
 845	  sensor inside the Intel 5500, 5520 and X58 chipsets.
 846
 847	  This driver can also be built as a module. If so, the module
 848	  will be called i5500_temp.
 849
 850config SENSORS_CORETEMP
 851	tristate "Intel Core/Core2/Atom temperature sensor"
 852	depends on X86
 853	help
 854	  If you say yes here you get support for the temperature
 855	  sensor inside your CPU. Most of the family 6 CPUs
 856	  are supported. Check Documentation/hwmon/coretemp.rst for details.
 857
 858config SENSORS_ISL28022
 859	tristate "Renesas ISL28022"
 860	depends on I2C
 861	select REGMAP_I2C
 862	help
 863	  If you say yes here you get support for ISL28022 power monitor.
 864	  Check Documentation/hwmon/isl28022.rst for details.
 865
 866	  This driver can also be built as a module. If so, the module
 867	  will be called isl28022.
 868
 869config SENSORS_IT87
 870	tristate "ITE IT87xx and compatibles"
 871	depends on HAS_IOPORT
 872	depends on !PPC
 873	select HWMON_VID
 874	help
 875	  If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F,
 876	  IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E,
 877	  IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
 878	  IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950
 879	  clone.
 880
 881	  This driver can also be built as a module. If so, the module
 882	  will be called it87.
 883
 884config SENSORS_JC42
 885	tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 886	depends on I2C
 887	select REGMAP_I2C
 888	help
 889	  If you say yes here, you get support for JEDEC JC42.4 compliant
 890	  temperature sensors, which are used on many DDR3 memory modules for
 891	  mobile devices and servers.  Support will include, but not be limited
 892	  to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
 893	  MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,
 894	  STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
 895
 896	  This driver can also be built as a module. If so, the module
 897	  will be called jc42.
 898
 899config SENSORS_POWERZ
 900	tristate "ChargerLAB POWER-Z USB-C tester"
 901	depends on USB
 902	help
 903	  If you say yes here you get support for ChargerLAB POWER-Z series of
 904	  USB-C charging testers.
 905
 906	  This driver can also be built as a module. If so, the module
 907	  will be called powerz.
 908
 909config SENSORS_POWR1220
 910	tristate "Lattice POWR1220 Power Monitoring"
 911	depends on I2C
 912	help
 913	  If you say yes here you get access to the hardware monitoring
 914	  functions of the Lattice POWR1220 isp Power Supply Monitoring,
 915	  Sequencing and Margining Controller.
 916
 917	  This driver can also be built as a module. If so, the module
 918	  will be called powr1220.
 919
 920config SENSORS_LAN966X
 921	tristate "Microchip LAN966x Hardware Monitoring"
 922	depends on SOC_LAN966 || COMPILE_TEST
 923	select REGMAP
 924	select POLYNOMIAL
 925	help
 926	  If you say yes here you get support for temperature monitoring
 927	  on the Microchip LAN966x SoC.
 928
 929	  This driver can also be built as a module. If so, the module
 930	  will be called lan966x-hwmon.
 931
 932config SENSORS_LENOVO_EC
 933        tristate "Sensor reader for Lenovo ThinkStations"
 934        depends on X86
 935        help
 936          If you say yes here you get support for LENOVO
 937          EC Sensor data on newer ThinkStation systems
 938
 939          This driver can also be built as a module. If so, the module
 940          will be called lenovo_ec_sensors.
 941
 942config SENSORS_LINEAGE
 943	tristate "Lineage Compact Power Line Power Entry Module"
 944	depends on I2C
 945	help
 946	  If you say yes here you get support for the Lineage Compact Power Line
 947	  series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 948	  CP2000DC, CP2725, and others.
 949
 950	  This driver can also be built as a module. If so, the module
 951	  will be called lineage-pem.
 952
 953config SENSORS_LOCHNAGAR
 954	tristate "Lochnagar Hardware Monitor"
 955	depends on MFD_LOCHNAGAR
 956	help
 957	  If you say yes here you get support for Lochnagar 2 temperature,
 958	  voltage and current sensors abilities.
 959
 960	  This driver can also be built as a module.  If so, the module
 961	  will be called lochnagar-hwmon.
 962
 963config SENSORS_LTC2945
 964	tristate "Linear Technology LTC2945"
 965	depends on I2C
 966	select REGMAP_I2C
 967	help
 968	  If you say yes here you get support for Linear Technology LTC2945
 969	  I2C System Monitor.
 970
 971	  This driver can also be built as a module. If so, the module will
 972	  be called ltc2945.
 973
 974config SENSORS_LTC2947
 975	tristate
 976
 977config SENSORS_LTC2947_I2C
 978	tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C"
 979	depends on I2C
 980	select REGMAP_I2C
 981	select SENSORS_LTC2947
 982	help
 983	  If you say yes here you get support for Linear Technology LTC2947
 984	  I2C High Precision Power and Energy Monitor
 985
 986	  This driver can also be built as a module. If so, the module will
 987	  be called ltc2947-i2c.
 988
 989config SENSORS_LTC2947_SPI
 990	tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI"
 991	depends on SPI_MASTER
 992	select REGMAP_SPI
 993	select SENSORS_LTC2947
 994	help
 995	  If you say yes here you get support for Linear Technology LTC2947
 996	  SPI High Precision Power and Energy Monitor
 997
 998	  This driver can also be built as a module. If so, the module will
 999	  be called ltc2947-spi.
1000
1001config SENSORS_LTC2990
1002	tristate "Linear Technology LTC2990"
1003	depends on I2C
1004	help
1005	  If you say yes here you get support for Linear Technology LTC2990
1006	  I2C System Monitor. The LTC2990 supports a combination of voltage,
1007	  current and temperature monitoring.
1008
1009	  This driver can also be built as a module. If so, the module will
1010	  be called ltc2990.
1011
1012config SENSORS_LTC2991
1013	tristate "Analog Devices LTC2991"
1014	depends on I2C
1015	select REGMAP_I2C
1016	help
1017	  If you say yes here you get support for Analog Devices LTC2991
1018	  Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991
1019	  supports a combination of voltage, current and temperature monitoring.
1020
1021	  This driver can also be built as a module. If so, the module will
1022	  be called ltc2991.
1023
1024config SENSORS_LTC2992
1025	tristate "Linear Technology LTC2992"
1026	depends on I2C
1027	depends on GPIOLIB
1028	help
1029	  If you say yes here you get support for Linear Technology LTC2992
1030	  I2C System Monitor. The LTC2992 measures current, voltage, and
1031	  power of two supplies.
1032
1033	  This driver can also be built as a module. If so, the module will
1034	  be called ltc2992.
1035
1036config SENSORS_LTC4151
1037	tristate "Linear Technology LTC4151"
1038	depends on I2C
1039	help
1040	  If you say yes here you get support for Linear Technology LTC4151
1041	  High Voltage I2C Current and Voltage Monitor interface.
1042
1043	  This driver can also be built as a module. If so, the module will
1044	  be called ltc4151.
1045
1046config SENSORS_LTC4215
1047	tristate "Linear Technology LTC4215"
1048	depends on I2C
1049	help
1050	  If you say yes here you get support for Linear Technology LTC4215
1051	  Hot Swap Controller I2C interface.
1052
1053	  This driver can also be built as a module. If so, the module will
1054	  be called ltc4215.
1055
1056config SENSORS_LTC4222
1057	tristate "Linear Technology LTC4222"
1058	depends on I2C
1059	select REGMAP_I2C
1060	help
1061	  If you say yes here you get support for Linear Technology LTC4222
1062	  Dual Hot Swap Controller I2C interface.
1063
1064	  This driver can also be built as a module. If so, the module will
1065	  be called ltc4222.
1066
1067config SENSORS_LTC4245
1068	tristate "Linear Technology LTC4245"
1069	depends on I2C
1070	help
1071	  If you say yes here you get support for Linear Technology LTC4245
1072	  Multiple Supply Hot Swap Controller I2C interface.
1073
1074	  This driver can also be built as a module. If so, the module will
1075	  be called ltc4245.
1076
1077config SENSORS_LTC4260
1078	tristate "Linear Technology LTC4260"
1079	depends on I2C
1080	select REGMAP_I2C
1081	help
1082	  If you say yes here you get support for Linear Technology LTC4260
1083	  Positive Voltage Hot Swap Controller I2C interface.
1084
1085	  This driver can also be built as a module. If so, the module will
1086	  be called ltc4260.
1087
1088config SENSORS_LTC4261
1089	tristate "Linear Technology LTC4261"
1090	depends on I2C
1091	help
1092	  If you say yes here you get support for Linear Technology LTC4261
1093	  Negative Voltage Hot Swap Controller I2C interface.
1094
1095	  This driver can also be built as a module. If so, the module will
1096	  be called ltc4261.
1097
1098config SENSORS_LTC4282
1099	tristate "Analog Devices LTC4282"
1100	depends on I2C
1101	select REGMAP_I2C
1102	help
1103	  If you say yes here you get support for Analog Devices LTC4282
1104	  High Current Hot Swap Controller I2C interface.
1105
1106	  This driver can also be built as a module. If so, the module will
1107	  be called ltc4282.
1108
1109config SENSORS_LTQ_CPUTEMP
1110	bool "Lantiq cpu temperature sensor driver"
1111	depends on SOC_XWAY
1112	help
1113	  If you say yes here you get support for the temperature
1114	  sensor inside your CPU.
1115
1116config SENSORS_MAX1111
1117	tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
1118	depends on SPI_MASTER
1119	help
1120	  Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
1121	  ADC chips.
1122
1123	  This driver can also be built as a module. If so, the module
1124	  will be called max1111.
1125
1126config SENSORS_MAX127
1127	tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System"
1128	depends on I2C
1129	help
1130	  Say y here to support Maxim's MAX127 DAS chips.
1131
1132	  This driver can also be built as a module. If so, the module
1133	  will be called max127.
1134
1135config SENSORS_MAX16065
1136	tristate "Maxim MAX16065 System Manager and compatibles"
1137	depends on I2C
1138	help
1139	  If you say yes here you get support for hardware monitoring
1140	  capabilities of the following Maxim System Manager chips.
1141	    MAX16065
1142	    MAX16066
1143	    MAX16067
1144	    MAX16068
1145	    MAX16070
1146	    MAX16071
1147
1148	  This driver can also be built as a module. If so, the module
1149	  will be called max16065.
1150
1151config SENSORS_MAX1619
1152	tristate "Maxim MAX1619 sensor chip"
1153	depends on I2C
1154	help
1155	  If you say yes here you get support for MAX1619 sensor chip.
1156
1157	  This driver can also be built as a module. If so, the module
1158	  will be called max1619.
1159
1160config SENSORS_MAX1668
1161	tristate "Maxim MAX1668 and compatibles"
1162	depends on I2C
1163	select REGMAP_I2C
1164	help
1165	  If you say yes here you get support for MAX1668, MAX1989 and
1166	  MAX1805 chips.
1167
1168	  This driver can also be built as a module. If so, the module
1169	  will be called max1668.
1170
1171config SENSORS_MAX197
1172	tristate "Maxim MAX197 and compatibles"
1173	help
1174	  Support for the Maxim MAX197 A/D converter.
1175	  Support will include, but not be limited to, MAX197, and MAX199.
1176
1177	  This driver can also be built as a module. If so, the module
1178	  will be called max197.
1179
1180config SENSORS_MAX31722
1181	tristate "MAX31722 temperature sensor"
1182	depends on SPI
1183	help
1184	  Support for the Maxim Integrated MAX31722/MAX31723 digital
1185	  thermometers/thermostats operating over an SPI interface.
1186
1187	  This driver can also be built as a module. If so, the module
1188	  will be called max31722.
1189
1190config SENSORS_MAX31730
1191	tristate "MAX31730 temperature sensor"
1192	depends on I2C
1193	help
1194	  Support for the Maxim Integrated MAX31730 3-Channel Remote
1195	  Temperature Sensor.
1196
1197	  This driver can also be built as a module. If so, the module
1198	  will be called max31730.
1199
1200config SENSORS_MAX31760
1201	tristate "MAX31760 fan speed controller"
1202	depends on I2C
1203	select REGMAP_I2C
1204	help
1205	  Support for the Analog Devices MAX31760 Precision Fan-Speed
1206	  Controller. MAX31760 integrates temperature sensing along with
1207	  precision PWM fan control.
1208
1209	  This driver can also be built as a module. If so, the module
1210	  will be called max31760.
1211
1212config MAX31827
1213	tristate "MAX31827 low-power temperature switch and similar devices"
1214	depends on I2C
1215	select REGMAP_I2C
1216	help
1217	  If you say yes here you get support for MAX31827, MAX31828 and
1218	  MAX31829 low-power temperature switches and sensors connected with I2C.
1219
1220	  This driver can also be built as a module.  If so, the module
1221	  will be called max31827.
1222
1223config SENSORS_MAX6620
1224	tristate "Maxim MAX6620 fan controller"
1225	depends on I2C
1226	help
1227	  If you say yes here you get support for the MAX6620
1228	  fan controller.
1229
1230	  This driver can also be built as a module. If so, the module
1231	  will be called max6620.
1232
1233config SENSORS_MAX6621
1234	tristate "Maxim MAX6621 sensor chip"
1235	depends on I2C
1236	select REGMAP_I2C
1237	help
1238	  If you say yes here you get support for MAX6621 sensor chip.
1239	  MAX6621 is a PECI-to-I2C translator provides an efficient,
1240	  low-cost solution for PECI-to-SMBus/I2C protocol conversion.
1241	  It allows reading the temperature from the PECI-compliant
1242	  host directly from up to four PECI-enabled CPUs.
1243
1244	  This driver can also be built as a module. If so, the module
1245	  will be called max6621.
1246
1247config SENSORS_MAX6639
1248	tristate "Maxim MAX6639 sensor chip"
1249	depends on I2C
1250	select REGMAP_I2C
1251	help
1252	  If you say yes here you get support for the MAX6639
1253	  sensor chips.
1254
1255	  This driver can also be built as a module. If so, the module
1256	  will be called max6639.
1257
 
 
 
 
 
 
 
 
 
 
 
 
1258config SENSORS_MAX6650
1259	tristate "Maxim MAX6650 sensor chip"
1260	depends on I2C
1261	depends on THERMAL || THERMAL=n
1262	help
1263	  If you say yes here you get support for the MAX6650 / MAX6651
1264	  sensor chips.
1265
1266	  This driver can also be built as a module. If so, the module
1267	  will be called max6650.
1268
1269config SENSORS_MAX6697
1270	tristate "Maxim MAX6697 and compatibles"
1271	depends on I2C
1272	help
1273	  If you say yes here you get support for MAX6581, MAX6602, MAX6622,
1274	  MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
1275	  temperature sensor chips.
1276
1277	  This driver can also be built as a module. If so, the module
1278	  will be called max6697.
1279
1280config SENSORS_MAX31790
1281	tristate "Maxim MAX31790 sensor chip"
1282	depends on I2C
1283	help
1284	  If you say yes here you get support for 6-Channel PWM-Output
1285	  Fan RPM Controller.
1286
1287	  This driver can also be built as a module. If so, the module
1288	  will be called max31790.
1289
1290config SENSORS_MC34VR500
1291	tristate "NXP MC34VR500 hardware monitoring driver"
1292	depends on I2C
1293	select REGMAP_I2C
1294	help
1295	  If you say yes here you get support for the temperature and input
1296	  voltage sensors of the NXP MC34VR500.
1297
1298config SENSORS_MCP3021
1299	tristate "Microchip MCP3021 and compatibles"
1300	depends on I2C
1301	help
1302	  If you say yes here you get support for MCP3021 and MCP3221.
1303	  The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
1304	  with 12-bit resolution.
1305
1306	  This driver can also be built as a module. If so, the module
1307	  will be called mcp3021.
1308
1309config SENSORS_MLXREG_FAN
1310	tristate "Mellanox FAN driver"
1311	depends on MELLANOX_PLATFORM
1312	imply THERMAL
1313	select REGMAP
1314	help
1315	  This option enables support for the FAN control on the Mellanox
1316	  Ethernet and InfiniBand switches. The driver can be activated by the
1317	  platform device add call. Say Y to enable these. To compile this
1318	  driver as a module, choose 'M' here: the module will be called
1319	  mlxreg-fan.
1320
1321config SENSORS_TC654
1322	tristate "Microchip TC654/TC655 and compatibles"
1323	depends on I2C
1324	help
1325	  If you say yes here you get support for TC654 and TC655.
1326	  The TC654 and TC655 are PWM mode fan speed controllers with
1327	  FanSense technology for use with brushless DC fans.
1328
1329	  This driver can also be built as a module. If so, the module
1330	  will be called tc654.
1331
1332config SENSORS_TPS23861
1333	tristate "Texas Instruments TPS23861 PoE PSE"
1334	depends on I2C
1335	select REGMAP_I2C
1336	help
1337	  If you say yes here you get support for Texas Instruments
1338	  TPS23861 802.3at PoE PSE chips.
1339
1340	  This driver can also be built as a module. If so, the module
1341	  will be called tps23861.
1342
1343config SENSORS_MENF21BMC_HWMON
1344	tristate "MEN 14F021P00 BMC Hardware Monitoring"
1345	depends on MFD_MENF21BMC
1346	help
1347	  Say Y here to include support for the MEN 14F021P00 BMC
1348	  hardware monitoring.
1349
1350	  This driver can also be built as a module. If so the module
1351	  will be called menf21bmc_hwmon.
1352
1353config SENSORS_MR75203
1354	tristate "Moortec Semiconductor MR75203 PVT Controller"
1355	select REGMAP_MMIO
1356	help
1357	  If you say yes here you get support for Moortec MR75203
1358	  PVT controller.
1359
1360	  This driver can also be built as a module. If so, the module
1361	  will be called mr75203.
1362
1363config SENSORS_ADCXX
1364	tristate "National Semiconductor ADCxxxSxxx"
1365	depends on SPI_MASTER
1366	help
1367	  If you say yes here you get support for the National Semiconductor
1368	  ADC<bb><c>S<sss> chip family, where
1369	  * bb  is the resolution in number of bits (8, 10, 12)
1370	  * c   is the number of channels (1, 2, 4, 8)
1371	  * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
1372	    kSPS and 101 for 1 MSPS)
1373
1374	  Examples : ADC081S101, ADC124S501, ...
1375
1376	  This driver can also be built as a module. If so, the module
1377	  will be called adcxx.
1378
1379config SENSORS_LM63
1380	tristate "National Semiconductor LM63 and compatibles"
1381	depends on I2C
1382	help
1383	  If you say yes here you get support for the National
1384	  Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
1385	  sensors with integrated fan control.  Such chips are found
1386	  on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
1387	  others.
1388
1389	  This driver can also be built as a module. If so, the module
1390	  will be called lm63.
1391
1392config SENSORS_LM70
1393	tristate "National Semiconductor LM70 and compatibles"
1394	depends on SPI_MASTER
1395	help
1396	  If you say yes here you get support for the National Semiconductor
1397	  LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124,
1398	  TMP125 digital temperature sensor chips.
1399
1400	  This driver can also be built as a module. If so, the module
1401	  will be called lm70.
1402
1403config SENSORS_LM73
1404	tristate "National Semiconductor LM73"
1405	depends on I2C
1406	help
1407	  If you say yes here you get support for National Semiconductor LM73
1408	  sensor chips.
1409	  This driver can also be built as a module. If so, the module
1410	  will be called lm73.
1411
1412config SENSORS_LM75
1413	tristate "National Semiconductor LM75 and compatibles"
1414	depends on I2C
1415	select REGMAP_I2C
1416	help
1417	  If you say yes here you get support for one common type of
1418	  temperature sensor chip, with models including:
1419
1420		- Analog Devices ADT75
1421		- Atmel (now Microchip) AT30TS74
1422		- Dallas Semiconductor DS75, DS1775 and DS7505
1423		- Global Mixed-mode Technology (GMT) G751
1424		- Maxim MAX6625 and MAX6626
1425		- Microchip MCP980x
1426		- National Semiconductor LM75, LM75A
1427		- NXP's LM75A
1428		- ST Microelectronics STDS75
1429		- ST Microelectronics STLM75
1430		- TelCom (now Microchip) TCN75
1431		- Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75,
1432		  TMP175, TMP275
1433
1434	  This driver supports driver model based binding through board
1435	  specific I2C device tables.
1436
1437	  It also supports the "legacy" style of driver binding.  To use
1438	  that with some chips which don't replicate LM75 quirks exactly,
1439	  you may need the "force" module parameter.
1440
1441	  This driver can also be built as a module. If so, the module
1442	  will be called lm75.
1443
1444config SENSORS_LM77
1445	tristate "National Semiconductor LM77"
1446	depends on I2C
1447	help
1448	  If you say yes here you get support for National Semiconductor LM77
1449	  sensor chips.
1450
1451	  This driver can also be built as a module. If so, the module
1452	  will be called lm77.
1453
1454config SENSORS_LM78
1455	tristate "National Semiconductor LM78 and compatibles"
1456	depends on I2C
1457	select HWMON_VID
1458	help
1459	  If you say yes here you get support for National Semiconductor LM78,
1460	  LM78-J and LM79.
1461
1462	  This driver can also be built as a module. If so, the module
1463	  will be called lm78.
1464
1465config SENSORS_LM80
1466	tristate "National Semiconductor LM80 and LM96080"
1467	depends on I2C
1468	help
1469	  If you say yes here you get support for National Semiconductor
1470	  LM80 and LM96080 sensor chips.
1471
1472	  This driver can also be built as a module. If so, the module
1473	  will be called lm80.
1474
1475config SENSORS_LM83
1476	tristate "National Semiconductor LM83 and compatibles"
1477	depends on I2C
1478	select REGMAP
1479	help
1480	  If you say yes here you get support for National Semiconductor
1481	  LM82 and LM83 sensor chips.
1482
1483	  This driver can also be built as a module. If so, the module
1484	  will be called lm83.
1485
1486config SENSORS_LM85
1487	tristate "National Semiconductor LM85 and compatibles"
1488	depends on I2C
1489	select HWMON_VID
1490	help
1491	  If you say yes here you get support for National Semiconductor LM85
1492	  sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
1493	  EMC6D101, EMC6D102, and EMC6D103.
1494
1495	  This driver can also be built as a module. If so, the module
1496	  will be called lm85.
1497
1498config SENSORS_LM87
1499	tristate "National Semiconductor LM87 and compatibles"
1500	depends on I2C
1501	select HWMON_VID
1502	help
1503	  If you say yes here you get support for National Semiconductor LM87
1504	  and Analog Devices ADM1024 sensor chips.
1505
1506	  This driver can also be built as a module. If so, the module
1507	  will be called lm87.
1508
1509config SENSORS_LM90
1510	tristate "National Semiconductor LM90 and compatibles"
1511	depends on I2C
1512	help
1513	  If you say yes here you get support for National Semiconductor LM84,
1514	  LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A,
1515	  ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A,
1516	  Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654,
1517	  MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695,
1518	  MAX6696,
1519	  ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218,
1520	  Winbond/Nuvoton W83L771W/G/AWG/ASG,
1521	  Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461
1522	  sensor chips.
1523
1524	  This driver can also be built as a module. If so, the module
1525	  will be called lm90.
1526
1527config SENSORS_LM92
1528	tristate "National Semiconductor LM92 and compatibles"
1529	depends on I2C
1530	select REGMAP_I2C
1531	help
1532	  If you say yes here you get support for National Semiconductor LM92
1533	  and LM76 as well as Maxim MAX6633/6634/6635 sensor chips.
1534
1535	  This driver can also be built as a module. If so, the module
1536	  will be called lm92.
1537
1538config SENSORS_LM93
1539	tristate "National Semiconductor LM93 and compatibles"
1540	depends on I2C
1541	select HWMON_VID
1542	help
1543	  If you say yes here you get support for National Semiconductor LM93,
1544	  LM94, and compatible sensor chips.
1545
1546	  This driver can also be built as a module. If so, the module
1547	  will be called lm93.
1548
1549config SENSORS_LM95234
1550	tristate "National Semiconductor LM95234 and compatibles"
1551	depends on I2C
1552	select REGMAP_I2C
1553	help
1554	  If you say yes here you get support for the LM95233 and LM95234
1555	  temperature sensor chips.
1556
1557	  This driver can also be built as a module. If so, the module
1558	  will be called lm95234.
1559
1560config SENSORS_LM95241
1561	tristate "National Semiconductor LM95241 and compatibles"
1562	depends on I2C
1563	help
1564	  If you say yes here you get support for LM95231 and LM95241 sensor
1565	  chips.
1566
1567	  This driver can also be built as a module. If so, the module
1568	  will be called lm95241.
1569
1570config SENSORS_LM95245
1571	tristate "National Semiconductor LM95245 and compatibles"
1572	depends on I2C
1573	select REGMAP_I2C
1574	help
1575	  If you say yes here you get support for LM95235 and LM95245
1576	  temperature sensor chips.
1577
1578	  This driver can also be built as a module. If so, the module
1579	  will be called lm95245.
1580
1581config SENSORS_PC87360
1582	tristate "National Semiconductor PC87360 family"
1583	depends on HAS_IOPORT
1584	depends on !PPC
1585	select HWMON_VID
1586	help
1587	  If you say yes here you get access to the hardware monitoring
1588	  functions of the National Semiconductor PC8736x Super-I/O chips.
1589	  The PC87360, PC87363 and PC87364 only have fan monitoring and
1590	  control.  The PC87365 and PC87366 additionally have voltage and
1591	  temperature monitoring.
1592
1593	  This driver can also be built as a module. If so, the module
1594	  will be called pc87360.
1595
1596config SENSORS_PC87427
1597	tristate "National Semiconductor PC87427"
1598	depends on HAS_IOPORT
1599	depends on !PPC
1600	help
1601	  If you say yes here you get access to the hardware monitoring
1602	  functions of the National Semiconductor PC87427 Super-I/O chip.
1603	  The chip has two distinct logical devices, one for fan speed
1604	  monitoring and control, and one for voltage and temperature
1605	  monitoring. Fan speed monitoring and control are supported, as
1606	  well as temperature monitoring. Voltages aren't supported yet.
1607
1608	  This driver can also be built as a module. If so, the module
1609	  will be called pc87427.
1610
1611config SENSORS_NTC_THERMISTOR
1612	tristate "NTC thermistor support"
1613	depends on IIO
1614	depends on THERMAL || !THERMAL_OF
1615	help
1616	  This driver supports NTC thermistors sensor reading and its
1617	  interpretation. The driver can also monitor the temperature and
1618	  send notifications about the temperature.
1619
1620	  Currently, this driver supports
1621	  NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
1622	  NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and
1623	  B57891S0103 from EPCOS.
1624
1625	  This driver can also be built as a module. If so, the module
1626	  will be called ntc-thermistor.
1627
1628config SENSORS_NCT6683
1629	tristate "Nuvoton NCT6683D"
1630	depends on HAS_IOPORT
1631	depends on !PPC
1632	help
1633	  If you say yes here you get support for the hardware monitoring
1634	  functionality of the Nuvoton NCT6683D eSIO chip.
1635
1636	  This driver can also be built as a module. If so, the module
1637	  will be called nct6683.
1638
1639config SENSORS_NCT6775_CORE
1640	tristate
1641	select REGMAP
1642	help
1643	  This module contains common code shared by the platform and
1644	  i2c versions of the nct6775 driver; it is not useful on its
1645	  own.
1646
1647	  If built as a module, the module will be called
1648	  nct6775-core.
1649
1650config SENSORS_NCT6775
1651	tristate "Platform driver for Nuvoton NCT6775F and compatibles"
1652	depends on HAS_IOPORT
1653	depends on !PPC
1654	depends on ACPI || ACPI=n
1655	select HWMON_VID
1656	select SENSORS_NCT6775_CORE
1657	help
1658	  If you say yes here you get support for the hardware monitoring
1659	  functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
1660	  NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
1661	  Super-I/O chips. This driver replaces the w83627ehf driver for
1662	  NCT6775F and NCT6776F.
1663
1664	  This driver can also be built as a module. If so, the module
1665	  will be called nct6775.
1666
1667config SENSORS_NCT6775_I2C
1668	tristate "I2C driver for Nuvoton NCT6775F and compatibles"
1669	depends on I2C
1670	select REGMAP_I2C
1671	select SENSORS_NCT6775_CORE
1672	help
1673	  If you say yes here you get support for the hardware monitoring
1674	  functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
1675	  NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
1676	  Super-I/O chips via their I2C interface.
1677
1678	  If you're not building a kernel for a BMC, this is probably
1679	  not the driver you want (see CONFIG_SENSORS_NCT6775).
1680
1681	  This driver can also be built as a module. If so, the module
1682	  will be called nct6775-i2c.
1683
1684config SENSORS_NCT7363
1685	tristate "Nuvoton NCT7363Y"
1686	depends on I2C
1687	select REGMAP_I2C
1688	help
1689	  If you say yes here you get support for the Nuvoton NCT7363Y
1690	  hardware monitoring chip.
1691
1692	  This driver can also be built as a module. If so, the module
1693	  will be called nct7363.
1694
1695config SENSORS_NCT7802
1696	tristate "Nuvoton NCT7802Y"
1697	depends on I2C
1698	select REGMAP_I2C
1699	help
1700	  If you say yes here you get support for the Nuvoton NCT7802Y
1701	  hardware monitoring chip.
1702
1703	  This driver can also be built as a module. If so, the module
1704	  will be called nct7802.
1705
1706config SENSORS_NCT7904
1707	tristate "Nuvoton NCT7904"
1708	depends on I2C && WATCHDOG
1709	select WATCHDOG_CORE
1710	help
1711	  If you say yes here you get support for the Nuvoton NCT7904
1712	  hardware monitoring chip, including manual fan speed control
1713	  and support for the integrated watchdog.
1714
1715	  This driver can also be built as a module. If so, the module
1716	  will be called nct7904.
1717
1718config SENSORS_NPCM7XX
1719	tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers"
1720	imply THERMAL
1721	help
1722	  This driver provides support for Nuvoton NPCM750/730/715/705 PWM
1723          and Fan controllers.
1724
1725          This driver can also be built as a module. If so, the module
1726          will be called npcm750-pwm-fan.
1727
1728config SENSORS_NSA320
1729	tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
1730	depends on GPIOLIB && OF
1731	depends on MACH_KIRKWOOD || COMPILE_TEST
1732	help
1733	  If you say yes here you get support for hardware monitoring
1734	  for the ZyXEL NSA320 Media Server and other compatible devices
1735	  (probably the NSA325 and some NSA310 variants).
1736
1737	  The sensor data is taken from a Holtek HT46R065 microcontroller
1738	  connected to GPIO lines.
1739
1740	  This driver can also be built as a module. If so, the module
1741	  will be called nsa320-hwmon.
1742
1743config SENSORS_NZXT_KRAKEN2
1744	tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers"
1745	depends on USB_HID
1746	help
1747	  If you say yes here you get support for hardware monitoring for the
1748	  NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers.
1749
1750	  This driver can also be built as a module. If so, the module
1751	  will be called nzxt-kraken2.
1752
1753config SENSORS_NZXT_KRAKEN3
1754	tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers"
1755	depends on USB_HID
1756	help
1757	  If you say yes here you get support for hardware monitoring for the
1758	  NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers.
1759
1760	  This driver can also be built as a module. If so, the module
1761	  will be called nzxt-kraken3.
1762
1763config SENSORS_NZXT_SMART2
1764	tristate "NZXT RGB & Fan Controller/Smart Device v2"
1765	depends on USB_HID
1766	help
1767	  If you say yes here you get support for hardware monitoring for the
1768	  NZXT RGB & Fan Controller/Smart Device v2.
1769
1770	  This driver can also be built as a module. If so, the module
1771	  will be called nzxt-smart2.
1772
1773source "drivers/hwmon/occ/Kconfig"
1774
1775config SENSORS_OXP
1776	tristate "OneXPlayer EC fan control"
1777	depends on ACPI_EC
1778	depends on X86
1779	help
1780		If you say yes here you get support for fan readings and control over
1781		OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant
1782		boards are supported.
1783
1784		Can also be built as a module. In that case it will be called oxp-sensors.
1785
1786config SENSORS_PCF8591
1787	tristate "Philips PCF8591 ADC/DAC"
1788	depends on I2C
1789	help
1790	  If you say yes here you get support for Philips PCF8591 4-channel
1791	  ADC, 1-channel DAC chips.
1792
1793	  This driver can also be built as a module. If so, the module
1794	  will be called pcf8591.
1795
1796	  These devices are hard to detect and rarely found on mainstream
1797	  hardware. If unsure, say N.
1798
1799source "drivers/hwmon/peci/Kconfig"
1800
1801source "drivers/hwmon/pmbus/Kconfig"
1802
1803config SENSORS_PT5161L
1804	tristate "Astera Labs PT5161L PCIe retimer hardware monitoring"
1805	depends on I2C
1806	help
1807	  If you say yes here you get support for temperature monitoring
1808	  on the Astera Labs PT5161L PCIe retimer.
1809
1810	  This driver can also be built as a module. If so, the module
1811	  will be called pt5161l.
1812
1813config SENSORS_PWM_FAN
1814	tristate "PWM fan"
1815	depends on PWM || COMPILE_TEST
1816	depends on THERMAL || THERMAL=n
1817	help
1818	  If you say yes here you get support for fans connected to PWM lines.
1819	  The driver uses the generic PWM interface, thus it will work on a
1820	  variety of SoCs.
1821
1822	  This driver can also be built as a module. If so, the module
1823	  will be called pwm-fan.
1824
1825config SENSORS_RASPBERRYPI_HWMON
1826	tristate "Raspberry Pi voltage monitor"
1827	depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
1828	help
1829	  If you say yes here you get support for voltage sensor on the
1830	  Raspberry Pi.
1831
1832	  This driver can also be built as a module. If so, the module
1833	  will be called raspberrypi-hwmon.
1834
1835config SENSORS_SL28CPLD
1836	tristate "Kontron sl28cpld hardware monitoring driver"
1837	depends on MFD_SL28CPLD || COMPILE_TEST
1838	help
1839	  If you say yes here you get support for the fan supervisor of the
1840	  sl28cpld board management controller.
1841
1842	  This driver can also be built as a module.  If so, the module
1843	  will be called sl28cpld-hwmon.
1844
1845config SENSORS_SBTSI
1846	tristate "Emulated SB-TSI temperature sensor"
1847	depends on I2C
1848	help
1849	  If you say yes here you get support for emulated temperature
1850	  sensors on AMD SoCs with SB-TSI interface connected to a BMC device.
1851
1852	  This driver can also be built as a module. If so, the module will
1853	  be called sbtsi_temp.
1854
1855config SENSORS_SBRMI
1856	tristate "Emulated SB-RMI sensor"
1857	depends on I2C
1858	help
1859	  If you say yes here you get support for emulated RMI
1860	  sensors on AMD SoCs with APML interface connected to a BMC device.
1861
1862	  This driver can also be built as a module. If so, the module will
1863	  be called sbrmi.
1864
1865config SENSORS_SHT15
1866	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
1867	depends on GPIOLIB || COMPILE_TEST
1868	select BITREVERSE
1869	help
1870	  If you say yes here you get support for the Sensiron SHT10, SHT11,
1871	  SHT15, SHT71, SHT75 humidity and temperature sensors.
1872
1873	  This driver can also be built as a module. If so, the module
1874	  will be called sht15.
1875
1876config SENSORS_SHT21
1877	tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
1878	depends on I2C
1879	help
1880	  If you say yes here you get support for the Sensiron SHT21, SHT25
1881	  humidity and temperature sensors.
1882
1883	  This driver can also be built as a module. If so, the module
1884	  will be called sht21.
1885
1886config SENSORS_SHT3x
1887	tristate "Sensiron humidity and temperature sensors. SHT3x and compat."
1888	depends on I2C
1889	select CRC8
1890	help
1891	  If you say yes here you get support for the Sensiron SHT30 and SHT31
1892	  humidity and temperature sensors.
1893
1894	  This driver can also be built as a module. If so, the module
1895	  will be called sht3x.
1896
1897config SENSORS_SHT4x
1898	tristate "Sensiron humidity and temperature sensors. SHT4x and compat."
1899	depends on I2C
1900	select CRC8
1901	help
1902	  If you say yes here you get support for the Sensiron SHT40, SHT41 and
1903	  SHT45 humidity and temperature sensors.
1904
1905	  This driver can also be built as a module. If so, the module
1906	  will be called sht4x.
1907
1908config SENSORS_SHTC1
1909	tristate "Sensiron humidity and temperature sensors. SHTC1 and compat."
1910	depends on I2C
1911	help
1912	  If you say yes here you get support for the Sensiron SHTC1, SHTW1,
1913	  and SHTC3 humidity and temperature sensors.
1914
1915	  This driver can also be built as a module. If so, the module
1916	  will be called shtc1.
1917
1918config SENSORS_SIS5595
1919	tristate "Silicon Integrated Systems Corp. SiS5595"
1920	depends on PCI && HAS_IOPORT
1921	help
1922	  If you say yes here you get support for the integrated sensors in
1923	  SiS5595 South Bridges.
1924
1925	  This driver can also be built as a module. If so, the module
1926	  will be called sis5595.
1927
1928config SENSORS_SY7636A
1929	tristate "Silergy SY7636A"
1930	depends on MFD_SY7636A
1931	help
1932	  If you say yes here you get support for the thermistor readout of
1933	  the Silergy SY7636A PMIC.
1934
1935	  This driver can also be built as a module.  If so, the module
1936	  will be called sy7636a-hwmon.
1937
1938config SENSORS_DME1737
1939	tristate "SMSC DME1737, SCH311x and compatibles"
1940	depends on HAS_IOPORT
1941	depends on I2C && !PPC
1942	select HWMON_VID
1943	help
1944	  If you say yes here you get support for the hardware monitoring
1945	  and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1946	  Asus A8000 Super-I/O chips.
1947
1948	  This driver can also be built as a module. If so, the module
1949	  will be called dme1737.
1950
1951config SENSORS_EMC1403
1952	tristate "SMSC EMC1403/23 thermal sensor"
1953	depends on I2C
1954	select REGMAP_I2C
1955	help
1956	  If you say yes here you get support for the SMSC EMC1403/23
1957	  temperature monitoring chip.
1958
1959	  Threshold values can be configured using sysfs.
1960	  Data from the different diodes are accessible via sysfs.
1961
1962config SENSORS_EMC2103
1963	tristate "SMSC EMC2103"
1964	depends on I2C
1965	help
1966	  If you say yes here you get support for the temperature
1967	  and fan sensors of the SMSC EMC2103 chips.
1968
1969	  This driver can also be built as a module. If so, the module
1970	  will be called emc2103.
1971
1972config SENSORS_EMC2305
1973	tristate "Microchip EMC2305 and compatible EMC2301/2/3"
1974	depends on I2C
1975	imply THERMAL
1976	help
1977	  If you say yes here you get support for the Microchip EMC2305
1978	  fan controller chips.
1979	  The Microchip EMC2305 is a fan controller for up to 5 fans.
1980	  Fan rotation speeds are reported in RPM.
1981
1982	  This driver can also be built as a module.  If so, the module
1983	  will be called emc2305.
1984
1985config SENSORS_EMC6W201
1986	tristate "SMSC EMC6W201"
1987	depends on I2C
1988	help
1989	  If you say yes here you get support for the SMSC EMC6W201
1990	  hardware monitoring chip.
1991
1992	  This driver can also be built as a module. If so, the module
1993	  will be called emc6w201.
1994
1995config SENSORS_SMSC47M1
1996	tristate "SMSC LPC47M10x and compatibles"
1997	depends on HAS_IOPORT
1998	depends on !PPC
1999	help
2000	  If you say yes here you get support for the integrated fan
2001	  monitoring and control capabilities of the SMSC LPC47B27x,
2002	  LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
2003	  LPC47M192, LPC47M292 and LPC47M997 chips.
2004
2005	  The temperature and voltage sensor features of the LPC47M15x,
2006	  LPC47M192, LPC47M292 and LPC47M997 are supported by another
2007	  driver, select also "SMSC LPC47M192 and compatibles" below for
2008	  those.
2009
2010	  This driver can also be built as a module. If so, the module
2011	  will be called smsc47m1.
2012
2013config SENSORS_SMSC47M192
2014	tristate "SMSC LPC47M192 and compatibles"
2015	depends on I2C
2016	select HWMON_VID
2017	help
2018	  If you say yes here you get support for the temperature and
2019	  voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
2020	  and LPC47M997 chips.
2021
2022	  The fan monitoring and control capabilities of these chips
2023	  are supported by another driver, select
2024	  "SMSC LPC47M10x and compatibles" above. You need both drivers
2025	  if you want fan control and voltage/temperature sensor support.
2026
2027	  This driver can also be built as a module. If so, the module
2028	  will be called smsc47m192.
2029
2030config SENSORS_SMSC47B397
2031	tristate "SMSC LPC47B397-NC"
2032	depends on HAS_IOPORT
2033	depends on !PPC
2034	help
2035	  If you say yes here you get support for the SMSC LPC47B397-NC
2036	  sensor chip.
2037
2038	  This driver can also be built as a module. If so, the module
2039	  will be called smsc47b397.
2040
2041config SENSORS_SCH56XX_COMMON
2042	tristate
2043	select REGMAP
2044
2045config SENSORS_SCH5627
2046	tristate "SMSC SCH5627"
2047	depends on HAS_IOPORT
2048	depends on !PPC && WATCHDOG
2049	select SENSORS_SCH56XX_COMMON
2050	select WATCHDOG_CORE
2051	help
2052	  If you say yes here you get support for the hardware monitoring
2053	  features of the SMSC SCH5627 Super-I/O chip including support for
2054	  the integrated watchdog.
2055
2056	  This driver can also be built as a module. If so, the module
2057	  will be called sch5627.
2058
2059config SENSORS_SCH5636
2060	tristate "SMSC SCH5636"
2061	depends on HAS_IOPORT
2062	depends on !PPC && WATCHDOG
2063	select SENSORS_SCH56XX_COMMON
2064	select WATCHDOG_CORE
2065	help
2066	  SMSC SCH5636 Super I/O chips include an embedded microcontroller for
2067	  hardware monitoring solutions, allowing motherboard manufacturers to
2068	  create their own custom hwmon solution based upon the SCH5636.
2069
2070	  Currently this driver only supports the Fujitsu Theseus SCH5636 based
2071	  hwmon solution. Say yes here if you want support for the Fujitsu
2072	  Theseus' hardware monitoring features including support for the
2073	  integrated watchdog.
2074
2075	  This driver can also be built as a module. If so, the module
2076	  will be called sch5636.
2077
2078config SENSORS_STTS751
2079	tristate "ST Microelectronics STTS751"
2080	depends on I2C
2081	help
2082	  If you say yes here you get support for STTS751
2083	  temperature sensor chips.
2084
2085	  This driver can also be built as a module. If so, the module
2086	  will be called stts751.
2087
2088config SENSORS_SFCTEMP
2089	tristate "Starfive JH71x0 temperature sensor"
2090	depends on ARCH_STARFIVE || COMPILE_TEST
2091	help
2092	  If you say yes here you get support for temperature sensor
2093	  on the Starfive JH71x0 SoCs.
2094
2095	  This driver can also be built as a module.  If so, the module
2096	  will be called sfctemp.
2097
2098config SENSORS_SG2042_MCU
2099	tristate "Sophgo onboard MCU support"
2100	depends on I2C
2101	depends on ARCH_SOPHGO || COMPILE_TEST
2102	help
2103	  Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides
2104	  power control and some basic information.
2105
2106	  This driver can be built as a module. If so, the module
2107	  will be called sg2042-mcu.
2108
2109config SENSORS_SURFACE_FAN
2110	tristate "Surface Fan Driver"
2111	depends on SURFACE_AGGREGATOR
2112	depends on SURFACE_AGGREGATOR_BUS
2113	help
2114	  Driver that provides monitoring of the fan on Surface Pro devices that
2115	  have a fan, like the Surface Pro 9.
2116
2117	  This makes the fan's current speed accessible through the hwmon
2118	  system. It does not provide control over the fan, the firmware is
2119	  responsible for that, this driver merely provides monitoring.
2120
2121	  Select M or Y here, if you want to be able to read the fan's speed.
2122
2123config SENSORS_SURFACE_TEMP
2124	tristate "Microsoft Surface Thermal Sensor Driver"
2125	depends on SURFACE_AGGREGATOR
2126	depends on SURFACE_AGGREGATOR_BUS
2127	help
2128	  Driver for monitoring thermal sensors connected via the Surface
2129	  Aggregator Module (embedded controller) on Microsoft Surface devices.
2130
2131	  This driver can also be built as a module. If so, the module
2132	  will be called surface_temp.
2133
2134config SENSORS_ADC128D818
2135	tristate "Texas Instruments ADC128D818"
2136	depends on I2C
2137	help
2138	  If you say yes here you get support for the Texas Instruments
2139	  ADC128D818 System Monitor with Temperature Sensor chip.
2140
2141	  This driver can also be built as a module. If so, the module
2142	  will be called adc128d818.
2143
2144config SENSORS_ADS7828
2145	tristate "Texas Instruments ADS7828 and compatibles"
2146	depends on I2C
2147	select REGMAP_I2C
2148	help
2149	  If you say yes here you get support for Texas Instruments ADS7828 and
2150	  ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
2151	  it is 8-bit on ADS7830.
2152
2153	  This driver can also be built as a module. If so, the module
2154	  will be called ads7828.
2155
2156config SENSORS_ADS7871
2157	tristate "Texas Instruments ADS7871 A/D converter"
2158	depends on SPI
2159	help
2160	  If you say yes here you get support for TI ADS7871 & ADS7870
2161
2162	  This driver can also be built as a module. If so, the module
2163	  will be called ads7871.
2164
2165config SENSORS_AMC6821
2166	tristate "Texas Instruments AMC6821"
2167	depends on I2C
2168	select REGMAP_I2C
2169	help
2170	  If you say yes here you get support for the Texas Instruments
2171	  AMC6821 hardware monitoring chips.
2172
2173	  This driver can also be built as a module. If so, the module
2174	  will be called amc6821.
2175
2176config SENSORS_INA209
2177	tristate "TI / Burr Brown INA209"
2178	depends on I2C
2179	help
2180	  If you say yes here you get support for the TI / Burr Brown INA209
2181	  voltage / current / power monitor I2C interface.
2182
2183	  This driver can also be built as a module. If so, the module will
2184	  be called ina209.
2185
2186config SENSORS_INA2XX
2187	tristate "Texas Instruments INA219 and compatibles"
2188	depends on I2C
2189	select REGMAP_I2C
2190	help
2191	  If you say yes here you get support for INA219, INA220, INA226,
2192	  INA230, INA231, INA260, and SY24655 power monitor chips.
2193
2194	  The INA2xx driver is configured for the default configuration of
2195	  the part as described in the datasheet.
2196	  Default value for Rshunt is 10 mOhms except for INA260 which has an
2197	  internal 2 mOhm shunt resistor.
2198	  This driver can also be built as a module. If so, the module
2199	  will be called ina2xx.
2200
2201config SENSORS_INA238
2202	tristate "Texas Instruments INA238"
2203	depends on I2C
2204	select REGMAP_I2C
2205	help
2206	  If you say yes here you get support for the INA238 power monitor
2207	  chip. This driver supports voltage, current, power and temperature
2208	  measurements as well as alarm configuration.
2209
2210	  This driver can also be built as a module. If so, the module
2211	  will be called ina238.
2212
2213config SENSORS_INA3221
2214	tristate "Texas Instruments INA3221 Triple Power Monitor"
2215	depends on I2C
2216	select REGMAP_I2C
2217	help
2218	  If you say yes here you get support for  the TI INA3221 Triple Power
2219	  Monitor.
2220
2221	  This driver can also be built as a module. If so, the module
2222	  will be called ina3221.
2223
2224config SENSORS_SPD5118
2225	tristate "SPD5118 Compliant Temperature Sensors"
2226	depends on I2C
2227	select REGMAP_I2C
2228	help
2229	  If you say yes here you get support for SPD5118 (JEDEC JESD300)
2230	  compliant temperature sensors. Such sensors are found on DDR5 memory
2231	  modules.
2232
2233	  This driver can also be built as a module. If so, the module
2234	  will be called spd5118.
2235
2236config SENSORS_SPD5118_DETECT
2237	bool "Enable detect function"
2238	depends on SENSORS_SPD5118
2239	default (!DMI || !X86)
2240	help
2241	  If enabled, the driver auto-detects if a chip in the SPD address
2242	  range is compliant to the SPD51888 standard and auto-instantiates
2243	  if that is the case. If disabled, SPD5118 compliant devices have
2244	  to be instantiated by other means. On X86 systems with DMI support
2245	  this will typically be done from DMI DDR detection code in the
2246	  I2C SMBus subsystem. Devicetree based systems will instantiate
2247	  attached devices if the DIMMs are listed in the devicetree file.
2248
2249	  Disabling the detect function will speed up boot time and reduce
2250	  the risk of mis-detecting SPD5118 compliant devices. However, it
2251	  may result in missed DIMMs under some circumstances.
2252
2253	  If unsure, say Y.
2254
2255config SENSORS_TC74
2256	tristate "Microchip TC74"
2257	depends on I2C
2258	help
2259	  If you say yes here you get support for Microchip TC74 single
2260	  input temperature sensor chips.
2261
2262	  This driver can also be built as a module. If so, the module
2263	  will be called tc74.
2264
2265config SENSORS_THMC50
2266	tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
2267	depends on I2C
2268	help
2269	  If you say yes here you get support for Texas Instruments THMC50
2270	  sensor chips and clones: the Analog Devices ADM1022.
2271
2272	  This driver can also be built as a module. If so, the module
2273	  will be called thmc50.
2274
2275config SENSORS_TMP102
2276	tristate "Texas Instruments TMP102"
2277	depends on I2C
2278	select REGMAP_I2C
2279	help
2280	  If you say yes here you get support for Texas Instruments TMP102
2281	  sensor chips.
2282
2283	  This driver can also be built as a module. If so, the module
2284	  will be called tmp102.
2285
2286config SENSORS_TMP103
2287	tristate "Texas Instruments TMP103"
2288	depends on I2C
2289	select REGMAP_I2C
2290	help
2291	  If you say yes here you get support for Texas Instruments TMP103
2292	  sensor chips.
2293
2294	  This driver can also be built as a module. If so, the module
2295	  will be called tmp103.
2296
2297config SENSORS_TMP108
2298	tristate "Texas Instruments TMP108"
2299	depends on I2C
2300	depends on I3C || !I3C
2301	select REGMAP_I2C
2302	select REGMAP_I3C if I3C
2303	help
2304	  If you say yes here you get support for Texas Instruments TMP108
2305	  sensor chips and NXP P3T1085.
2306
2307	  This driver can also be built as a module. If so, the module
2308	  will be called tmp108.
2309
2310config SENSORS_TMP401
2311	tristate "Texas Instruments TMP401 and compatibles"
2312	depends on I2C
2313	select REGMAP
2314	help
2315	  If you say yes here you get support for Texas Instruments TMP401,
2316	  TMP411, TMP431, TMP432, and TMP435 temperature sensor chips.
2317
2318	  This driver can also be built as a module. If so, the module
2319	  will be called tmp401.
2320
2321config SENSORS_TMP421
2322	tristate "Texas Instruments TMP421 and compatible"
2323	depends on I2C
2324	help
2325	  If you say yes here you get support for Texas Instruments TMP421,
2326	  TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.
2327
2328	  This driver can also be built as a module. If so, the module
2329	  will be called tmp421.
2330
2331config SENSORS_TMP464
2332	tristate "Texas Instruments TMP464 and compatible"
2333	depends on I2C
2334	select REGMAP_I2C
2335	help
2336	  If you say yes here you get support for Texas Instruments TMP464
2337	  and TMP468 temperature sensor chips.
2338
2339	  This driver can also be built as a module. If so, the module
2340	  will be called tmp464.
2341
2342config SENSORS_TMP513
2343	tristate "Texas Instruments TMP513 and compatibles"
2344	depends on I2C
2345	select REGMAP_I2C
2346	help
2347	  If you say yes here you get support for Texas Instruments TMP512,
2348	  and TMP513 temperature and power supply sensor chips.
2349
2350	  This driver can also be built as a module. If so, the module
2351	  will be called tmp513.
2352
2353config SENSORS_VEXPRESS
2354	tristate "Versatile Express"
2355	depends on VEXPRESS_CONFIG
2356	help
2357	  This driver provides support for hardware sensors available on
2358	  the ARM Ltd's Versatile Express platform. It can provide wide
2359	  range of information like temperature, power, energy.
2360
2361config SENSORS_VIA_CPUTEMP
2362	tristate "VIA CPU temperature sensor"
2363	depends on X86
2364	select HWMON_VID
2365	help
2366	  If you say yes here you get support for the temperature
2367	  sensor inside your CPU. Supported are all known variants of
2368	  the VIA C7 and Nano.
2369
2370config SENSORS_VIA686A
2371	tristate "VIA686A"
2372	depends on PCI && HAS_IOPORT
2373	help
2374	  If you say yes here you get support for the integrated sensors in
2375	  Via 686A/B South Bridges.
2376
2377	  This driver can also be built as a module. If so, the module
2378	  will be called via686a.
2379
2380config SENSORS_VT1211
2381	tristate "VIA VT1211"
2382	depends on HAS_IOPORT
2383	depends on !PPC
2384	select HWMON_VID
2385	help
2386	  If you say yes here then you get support for hardware monitoring
2387	  features of the VIA VT1211 Super-I/O chip.
2388
2389	  This driver can also be built as a module. If so, the module
2390	  will be called vt1211.
2391
2392config SENSORS_VT8231
2393	tristate "VIA VT8231"
2394	depends on PCI && HAS_IOPORT
2395	select HWMON_VID
2396	help
2397	  If you say yes here then you get support for the integrated sensors
2398	  in the VIA VT8231 device.
2399
2400	  This driver can also be built as a module. If so, the module
2401	  will be called vt8231.
2402
2403config SENSORS_W83773G
2404	tristate "Nuvoton W83773G"
2405	depends on I2C
2406	select REGMAP_I2C
2407	help
2408	  If you say yes here you get support for the Nuvoton W83773G hardware
2409	  monitoring chip.
2410
2411	  This driver can also be built as a module. If so, the module
2412	  will be called w83773g.
2413
2414config SENSORS_W83781D
2415	tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
2416	depends on I2C
2417	select HWMON_VID
2418	help
2419	  If you say yes here you get support for the Winbond W8378x series
2420	  of sensor chips: the W83781D, W83782D and W83783S, and the similar
2421	  Asus AS99127F.
2422
2423	  This driver can also be built as a module. If so, the module
2424	  will be called w83781d.
2425
2426config SENSORS_W83791D
2427	tristate "Winbond W83791D"
2428	depends on I2C
2429	select HWMON_VID
2430	help
2431	  If you say yes here you get support for the Winbond W83791D chip.
2432
2433	  This driver can also be built as a module. If so, the module
2434	  will be called w83791d.
2435
2436config SENSORS_W83792D
2437	tristate "Winbond W83792D"
2438	depends on I2C
2439	help
2440	  If you say yes here you get support for the Winbond W83792D chip.
2441
2442	  This driver can also be built as a module. If so, the module
2443	  will be called w83792d.
2444
2445config SENSORS_W83793
2446	tristate "Winbond W83793"
2447	depends on I2C
2448	select HWMON_VID
2449	help
2450	  If you say yes here you get support for the Winbond W83793
2451	  hardware monitoring chip, including support for the integrated
2452	  watchdog.
2453
2454	  This driver can also be built as a module. If so, the module
2455	  will be called w83793.
2456
2457config SENSORS_W83795
2458	tristate "Winbond/Nuvoton W83795G/ADG"
2459	depends on I2C
2460	help
2461	  If you say yes here you get support for the Winbond W83795G and
2462	  W83795ADG hardware monitoring chip, including manual fan speed
2463	  control.
2464
2465	  This driver can also be built as a module. If so, the module
2466	  will be called w83795.
2467
2468config SENSORS_W83795_FANCTRL
2469	bool "Include automatic fan control support"
2470	depends on SENSORS_W83795
2471	help
2472	  If you say yes here, support for automatic fan speed control
2473	  will be included in the driver.
2474
2475	  Please also note that this option will create sysfs attribute
2476	  files which may change in the future, so you shouldn't rely
2477	  on them being stable.
2478
2479config SENSORS_W83L785TS
2480	tristate "Winbond W83L785TS-S"
2481	depends on I2C
2482	help
2483	  If you say yes here you get support for the Winbond W83L785TS-S
2484	  sensor chip, which is used on the Asus A7N8X, among other
2485	  motherboards.
2486
2487	  This driver can also be built as a module. If so, the module
2488	  will be called w83l785ts.
2489
2490config SENSORS_W83L786NG
2491	tristate "Winbond W83L786NG, W83L786NR"
2492	depends on I2C
2493	help
2494	  If you say yes here you get support for the Winbond W83L786NG
2495	  and W83L786NR sensor chips.
2496
2497	  This driver can also be built as a module. If so, the module
2498	  will be called w83l786ng.
2499
2500config SENSORS_W83627HF
2501	tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
2502	depends on HAS_IOPORT
2503	depends on !PPC
2504	select HWMON_VID
2505	help
2506	  If you say yes here you get support for the Winbond W836X7 series
2507	  of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
2508	  W83697HF.
2509
2510	  This driver can also be built as a module. If so, the module
2511	  will be called w83627hf.
2512
2513config SENSORS_W83627EHF
2514	tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG"
2515	depends on HAS_IOPORT
2516	depends on !PPC
2517	select HWMON_VID
2518	help
2519	  If you say yes here you get support for the hardware
2520	  monitoring functionality of the Winbond W83627EHF Super-I/O chip.
2521
2522	  This driver also supports the W83627EHG, which is the lead-free
2523	  version of the W83627EHF, and the W83627DHG, which is a similar
2524	  chip suited for specific Intel processors that use PECI such as
2525	  the Core 2 Duo. And also the W83627UHG, which is a stripped down
2526	  version of the W83627DHG (as far as hardware monitoring goes.)
2527
2528	  This driver also supports Nuvoton W83667HG and W83667HG-B.
2529
2530	  This driver can also be built as a module. If so, the module
2531	  will be called w83627ehf.
2532
2533config SENSORS_WM831X
2534	tristate "WM831x PMICs"
2535	depends on MFD_WM831X
2536	help
2537	  If you say yes here you get support for the hardware
2538	  monitoring functionality of the Wolfson Microelectronics
2539	  WM831x series of PMICs.
2540
2541	  This driver can also be built as a module. If so, the module
2542	  will be called wm831x-hwmon.
2543
2544config SENSORS_WM8350
2545	tristate "Wolfson Microelectronics WM835x"
2546	depends on MFD_WM8350
2547	help
2548	  If you say yes here you get support for the hardware
2549	  monitoring features of the WM835x series of PMICs.
2550
2551	  This driver can also be built as a module. If so, the module
2552	  will be called wm8350-hwmon.
2553
2554config SENSORS_ULTRA45
2555	tristate "Sun Ultra45 PIC16F747"
2556	depends on SPARC64
2557	help
2558	  This driver provides support for the Ultra45 workstation environmental
2559	  sensors.
2560
2561config SENSORS_XGENE
2562	tristate "APM X-Gene SoC hardware monitoring driver"
2563	depends on XGENE_SLIMPRO_MBOX || PCC
2564	help
2565	  If you say yes here you get support for the temperature
2566	  and power sensors for APM X-Gene SoC.
2567
2568config SENSORS_INTEL_M10_BMC_HWMON
2569	tristate "Intel MAX10 BMC Hardware Monitoring"
2570	depends on MFD_INTEL_M10_BMC_CORE
2571	help
2572	  This driver provides support for the hardware monitoring functionality
2573	  on Intel MAX10 BMC chip.
2574
2575	  This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its
2576	  sensors monitor various telemetry data of different components on the
2577	  card, e.g. board temperature, FPGA core temperature/voltage/current.
2578
2579if ACPI
2580
2581comment "ACPI drivers"
2582
2583config SENSORS_ACPI_POWER
2584	tristate "ACPI 4.0 power meter"
2585	help
2586	  This driver exposes ACPI 4.0 power meters as hardware monitoring
2587	  devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
2588	  and a power meter.
2589
2590	  To compile this driver as a module, choose M here:
2591	  the module will be called acpi_power_meter.
2592
2593config SENSORS_ATK0110
2594	tristate "ASUS ATK0110"
2595	depends on X86
2596	help
2597	  If you say yes here you get support for the ACPI hardware
2598	  monitoring interface found in many ASUS motherboards. This
2599	  driver will provide readings of fans, voltages and temperatures
2600	  through the system firmware.
2601
2602	  This driver can also be built as a module. If so, the module
2603	  will be called asus_atk0110.
2604
2605config SENSORS_ASUS_WMI
2606	tristate "ASUS WMI X370/X470/B450/X399"
2607	depends on ACPI_WMI
2608	help
2609	  If you say yes here you get support for the ACPI hardware monitoring
2610	  interface found in X370/X470/B450/X399 ASUS motherboards. This driver
2611	  will provide readings of fans, voltages and temperatures through the system
2612	  firmware.
2613
2614	  This driver can also be built as a module. If so, the module
2615	  will be called asus_wmi_sensors.
2616
2617config SENSORS_ASUS_EC
2618	tristate "ASUS EC Sensors"
2619	depends on X86
2620	depends on ACPI_EC
2621	help
2622	  If you say yes here you get support for the ACPI embedded controller
2623	  hardware monitoring interface found in ASUS motherboards. The driver
2624	  currently supports B550/X570 boards, although other ASUS boards might
2625	  provide this monitoring interface as well.
2626
2627	  This driver can also be built as a module. If so, the module
2628	  will be called asus_ec_sensors.
2629
2630config SENSORS_HP_WMI
2631	tristate "HP WMI Sensors"
2632	depends on ACPI_WMI
2633	help
2634	  If you say yes here you get support for the ACPI hardware monitoring
2635	  interface found in HP (and some HP Compaq) business-class computers.
2636	  Available sensors vary between systems. Temperature and fan speed
2637	  sensors are the most common.
2638
2639	  This driver can also be built as a module. If so, the module
2640	  will be called hp_wmi_sensors.
2641
2642endif # ACPI
2643
2644endif # HWMON