Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3 bool
4 depends on DRM
5 help
6 Panel registration and lookup framework.
7
8menu "Display Panels"
9 depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12 tristate "ABT Y030XX067A 320x480 LCD panel"
13 depends on OF && SPI
14 select REGMAP_SPI
15 help
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21 tristate "ARM Versatile panel driver"
22 depends on OF
23 depends on MFD_SYSCON
24 select VIDEOMODE_HELPERS
25 help
26 This driver supports the ARM Versatile panels connected to ARM
27 reference designs. The panel is detected using special registers
28 in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31 tristate "ASUS Z00T TM5P5 NT35596 panel"
32 depends on GPIOLIB && OF
33 depends on DRM_MIPI_DSI
34 depends on BACKLIGHT_CLASS_DEVICE
35 help
36 Say Y here if you want to enable support for the ASUS TMP5P5
37 NT35596 1080x1920 video mode panel as found in some Asus
38 Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41 tristate "AUO A030JTN01"
42 depends on SPI
43 select REGMAP_SPI
44 help
45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46 as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49 tristate "Boe BF060Y8M-AJ0 panel"
50 depends on OF
51 depends on DRM_MIPI_DSI
52 depends on BACKLIGHT_CLASS_DEVICE
53 help
54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57 the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60 tristate "Boe Himax8279d panel"
61 depends on OF
62 depends on DRM_MIPI_DSI
63 depends on BACKLIGHT_CLASS_DEVICE
64 help
65 Say Y here if you want to enable support for Boe Himax8279d
66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67 24 bit RGB per pixel. It provides a MIPI DSI interface to
68 the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TH101MB31UIG002_28A
71 tristate "Boe TH101MB31UIG002-28A panel"
72 depends on OF
73 depends on DRM_MIPI_DSI
74 depends on BACKLIGHT_CLASS_DEVICE
75 help
76 Say Y here if you want to enable support for Boe
77 TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
78 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
79 interface to the host and has a built-in LED backlight.
80
81config DRM_PANEL_BOE_TV101WUM_NL6
82 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
83 depends on OF
84 depends on DRM_MIPI_DSI
85 depends on BACKLIGHT_CLASS_DEVICE
86 help
87 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
88 45NA WUXGA PANEL DSI Video Mode panel
89
90config DRM_PANEL_BOE_TV101WUM_LL2
91 tristate "BOE TV101WUM LL2 1200x1920 panel"
92 depends on OF
93 depends on DRM_MIPI_DSI
94 depends on BACKLIGHT_CLASS_DEVICE
95 help
96 Say Y here if you want to support for BOE TV101WUM-LL2
97 WUXGA PANEL DSI Video Mode panel
98
99config DRM_PANEL_EBBG_FT8719
100 tristate "EBBG FT8719 panel driver"
101 depends on OF
102 depends on DRM_MIPI_DSI
103 depends on BACKLIGHT_CLASS_DEVICE
104 help
105 Say Y here if you want to enable support for the EBBG FT8719
106 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
107 The panel has a resolution of 1080x2246. It provides a MIPI DSI
108 interface to the host.
109
110config DRM_PANEL_ELIDA_KD35T133
111 tristate "Elida KD35T133 panel driver"
112 depends on OF
113 depends on DRM_MIPI_DSI
114 depends on BACKLIGHT_CLASS_DEVICE
115 help
116 Say Y here if you want to enable support for the Elida
117 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
118 system interfaces.
119
120config DRM_PANEL_FEIXIN_K101_IM2BA02
121 tristate "Feixin K101 IM2BA02 panel"
122 depends on OF
123 depends on DRM_MIPI_DSI
124 depends on BACKLIGHT_CLASS_DEVICE
125 help
126 Say Y here if you want to enable support for the Feixin K101 IM2BA02
127 4-lane 800x1280 MIPI DSI panel.
128
129config DRM_PANEL_FEIYANG_FY07024DI26A30D
130 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
131 depends on OF
132 depends on DRM_MIPI_DSI
133 depends on BACKLIGHT_CLASS_DEVICE
134 help
135 Say Y if you want to enable support for panels based on the
136 Feiyang FY07024DI26A30-D MIPI-DSI interface.
137
138config DRM_PANEL_DSI_CM
139 tristate "Generic DSI command mode panels"
140 depends on OF
141 depends on DRM_MIPI_DSI
142 depends on BACKLIGHT_CLASS_DEVICE
143 help
144 DRM panel driver for DSI command mode panels with support for
145 embedded and external backlights.
146
147config DRM_PANEL_LVDS
148 tristate "Generic LVDS panel driver"
149 depends on OF
150 depends on BACKLIGHT_CLASS_DEVICE
151 select VIDEOMODE_HELPERS
152 help
153 This driver supports LVDS panels that don't require device-specific
154 handling of power supplies or control signals. It implements automatic
155 backlight handling if the panel is attached to a backlight controller.
156
157config DRM_PANEL_HIMAX_HX83102
158 tristate "Himax HX83102-based panels"
159 depends on OF
160 depends on DRM_MIPI_DSI
161 depends on BACKLIGHT_CLASS_DEVICE
162 help
163 Say Y if you want to enable support for panels based on the
164 Himax HX83102 controller.
165
166config DRM_PANEL_HIMAX_HX83112A
167 tristate "Himax HX83112A-based DSI panel"
168 depends on OF
169 depends on DRM_MIPI_DSI
170 depends on BACKLIGHT_CLASS_DEVICE
171 select DRM_KMS_HELPER
172 help
173 Say Y here if you want to enable support for Himax HX83112A-based
174 display panels, such as the one found in the Fairphone 4 smartphone.
175
176config DRM_PANEL_HIMAX_HX8394
177 tristate "HIMAX HX8394 MIPI-DSI LCD panels"
178 depends on OF
179 depends on DRM_MIPI_DSI
180 depends on BACKLIGHT_CLASS_DEVICE
181 help
182 Say Y if you want to enable support for panels based on the
183 Himax HX8394 controller, such as the HannStar HSD060BHW4
184 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
185
186 If M is selected the module will be called panel-himax-hx8394.
187
188config DRM_PANEL_ILITEK_IL9322
189 tristate "Ilitek ILI9322 320x240 QVGA panels"
190 depends on OF && SPI
191 select REGMAP
192 help
193 Say Y here if you want to enable support for Ilitek IL9322
194 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
195
196config DRM_PANEL_ILITEK_ILI9341
197 tristate "Ilitek ILI9341 240x320 QVGA panels"
198 depends on SPI
199 select DRM_KMS_HELPER
200 select DRM_GEM_DMA_HELPER
201 depends on BACKLIGHT_CLASS_DEVICE
202 select DRM_MIPI_DBI
203 help
204 Say Y here if you want to enable support for Ilitek IL9341
205 QVGA (240x320) RGB panels. support serial & parallel rgb
206 interface.
207
208config DRM_PANEL_ILITEK_ILI9805
209 tristate "Ilitek ILI9805-based panels"
210 depends on OF
211 depends on DRM_MIPI_DSI
212 depends on BACKLIGHT_CLASS_DEVICE
213 help
214 Say Y if you want to enable support for panels based on the
215 Ilitek ILI9805 controller.
216
217config DRM_PANEL_ILITEK_ILI9806E
218 tristate "Ilitek ILI9806E-based panels"
219 depends on OF
220 depends on DRM_MIPI_DSI
221 depends on BACKLIGHT_CLASS_DEVICE
222 help
223 Say Y if you want to enable support for panels based on the
224 Ilitek ILI9806E controller.
225
226config DRM_PANEL_ILITEK_ILI9881C
227 tristate "Ilitek ILI9881C-based panels"
228 depends on OF
229 depends on DRM_MIPI_DSI
230 depends on BACKLIGHT_CLASS_DEVICE
231 help
232 Say Y if you want to enable support for panels based on the
233 Ilitek ILI9881c controller.
234
235config DRM_PANEL_ILITEK_ILI9882T
236 tristate "Ilitek ILI9882t-based panels"
237 depends on OF
238 depends on DRM_MIPI_DSI
239 depends on BACKLIGHT_CLASS_DEVICE
240 help
241 Say Y if you want to enable support for panels based on the
242 Ilitek ILI9882t controller.
243
244config DRM_PANEL_INNOLUX_EJ030NA
245 tristate "Innolux EJ030NA 320x480 LCD panel"
246 depends on OF && SPI
247 select REGMAP_SPI
248 help
249 Say Y here to enable support for the Innolux/Chimei EJ030NA
250 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
251 and LDK handheld gaming consoles.
252
253config DRM_PANEL_INNOLUX_P079ZCA
254 tristate "Innolux P079ZCA panel"
255 depends on OF
256 depends on DRM_MIPI_DSI
257 depends on BACKLIGHT_CLASS_DEVICE
258 help
259 Say Y here if you want to enable support for Innolux P079ZCA
260 TFT-LCD modules. The panel has a 1024x768 resolution and uses
261 24 bit RGB per pixel. It provides a MIPI DSI interface to
262 the host and has a built-in LED backlight.
263
264config DRM_PANEL_JADARD_JD9365DA_H3
265 tristate "Jadard JD9365DA-H3 WXGA DSI panel"
266 depends on OF
267 depends on DRM_MIPI_DSI
268 depends on BACKLIGHT_CLASS_DEVICE
269 help
270 Say Y here if you want to enable support for Jadard JD9365DA-H3
271 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
272 800RGBx1280 dots at maximum.
273
274config DRM_PANEL_JDI_LPM102A188A
275 tristate "JDI LPM102A188A DSI panel"
276 depends on OF && GPIOLIB
277 depends on DRM_MIPI_DSI
278 depends on BACKLIGHT_CLASS_DEVICE
279 help
280 Say Y here if you want to enable support for JDI LPM102A188A DSI
281 command mode panel as found in Google Pixel C devices.
282 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
283 to the host.
284
285config DRM_PANEL_JDI_LT070ME05000
286 tristate "JDI LT070ME05000 WUXGA DSI panel"
287 depends on OF
288 depends on DRM_MIPI_DSI
289 depends on BACKLIGHT_CLASS_DEVICE
290 help
291 Say Y here if you want to enable support for JDI DSI video mode
292 panel as found in Google Nexus 7 (2013) devices.
293 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
294 24 bit per pixel.
295
296config DRM_PANEL_JDI_R63452
297 tristate "JDI R63452 Full HD DSI panel"
298 depends on OF
299 depends on DRM_MIPI_DSI
300 depends on BACKLIGHT_CLASS_DEVICE
301 help
302 Say Y here if you want to enable support for the JDI R63452
303 DSI command mode panel as found in Xiaomi Mi 5 Devices.
304
305config DRM_PANEL_KHADAS_TS050
306 tristate "Khadas TS050 panel"
307 depends on OF
308 depends on DRM_MIPI_DSI
309 depends on BACKLIGHT_CLASS_DEVICE
310 help
311 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
312 panel module. The panel has a 1080x1920 resolution and uses
313 24 bit RGB per pixel. It provides a MIPI DSI interface to
314 the host, a built-in LED backlight and touch controller.
315
316config DRM_PANEL_KINGDISPLAY_KD097D04
317 tristate "Kingdisplay kd097d04 panel"
318 depends on OF
319 depends on DRM_MIPI_DSI
320 depends on BACKLIGHT_CLASS_DEVICE
321 help
322 Say Y here if you want to enable support for Kingdisplay kd097d04
323 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
324 24 bit RGB per pixel. It provides a MIPI DSI interface to
325 the host and has a built-in LED backlight.
326
327config DRM_PANEL_LEADTEK_LTK050H3146W
328 tristate "Leadtek LTK050H3146W panel"
329 depends on OF
330 depends on DRM_MIPI_DSI
331 depends on BACKLIGHT_CLASS_DEVICE
332 help
333 Say Y here if you want to enable support for Leadtek LTK050H3146W
334 TFT-LCD modules. The panel has a 720x1280 resolution and uses
335 24 bit RGB per pixel. It provides a MIPI DSI interface to
336 the host and has a built-in LED backlight.
337
338config DRM_PANEL_LEADTEK_LTK500HD1829
339 tristate "Leadtek LTK500HD1829 panel"
340 depends on OF
341 depends on DRM_MIPI_DSI
342 depends on BACKLIGHT_CLASS_DEVICE
343 help
344 Say Y here if you want to enable support for Kingdisplay kd097d04
345 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
346 24 bit RGB per pixel. It provides a MIPI DSI interface to
347 the host and has a built-in LED backlight.
348
349config DRM_PANEL_LINCOLNTECH_LCD197
350 tristate "Lincoln Technologies lcd197 panel"
351 depends on OF
352 depends on DRM_MIPI_DSI
353 depends on BACKLIGHT_CLASS_DEVICE
354 help
355 Say Y here if you want to enable support for lincolntech lcd197
356 TFT-LCD modules. The panel has a 1080x1920 resolution and uses
357 24 bit RGB per pixel. It provides a MIPI DSI interface to
358 the host.
359
360config DRM_PANEL_LG_LB035Q02
361 tristate "LG LB035Q024573 RGB panel"
362 depends on GPIOLIB && OF && SPI
363 help
364 Say Y here if you want to enable support for the LB035Q02 RGB panel
365 (found on the Gumstix Overo Palo35 board). To compile this driver as
366 a module, choose M here.
367
368config DRM_PANEL_LG_LG4573
369 tristate "LG4573 RGB/SPI panel"
370 depends on OF && SPI
371 select VIDEOMODE_HELPERS
372 help
373 Say Y here if you want to enable support for LG4573 RGB panel.
374 To compile this driver as a module, choose M here.
375
376config DRM_PANEL_LG_SW43408
377 tristate "LG SW43408 panel"
378 depends on OF
379 depends on DRM_MIPI_DSI
380 depends on BACKLIGHT_CLASS_DEVICE
381 select DRM_DISPLAY_DSC_HELPER
382 select DRM_DISPLAY_HELPER
383 help
384 Say Y here if you want to enable support for LG sw43408 panel.
385 The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
386 pixel. It provides a MIPI DSI interface to the host and has a
387 built-in LED backlight.
388
389config DRM_PANEL_MAGNACHIP_D53E6EA8966
390 tristate "Magnachip D53E6EA8966 DSI panel"
391 depends on OF && SPI
392 depends on DRM_MIPI_DSI
393 depends on BACKLIGHT_CLASS_DEVICE
394 select DRM_MIPI_DBI
395 help
396 DRM panel driver for the Samsung AMS495QA01 panel controlled
397 with the Magnachip D53E6EA8966 panel IC. This panel receives
398 video data via DSI but commands via 9-bit SPI using DBI.
399
400config DRM_PANEL_MANTIX_MLAF057WE51
401 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
402 depends on OF
403 depends on DRM_MIPI_DSI
404 depends on BACKLIGHT_CLASS_DEVICE
405 help
406 Say Y here if you want to enable support for the Mantix
407 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
408 has a resolution of 720x1440 pixels, a built in backlight and touch
409 controller.
410
411config DRM_PANEL_NEC_NL8048HL11
412 tristate "NEC NL8048HL11 RGB panel"
413 depends on GPIOLIB && OF && SPI
414 help
415 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
416 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
417 as a module, choose M here.
418
419config DRM_PANEL_NEWVISION_NV3051D
420 tristate "NewVision NV3051D DSI panel"
421 depends on OF
422 depends on DRM_MIPI_DSI
423 depends on BACKLIGHT_CLASS_DEVICE
424 help
425 This driver supports the NV3051D based panel found on the Anbernic
426 RG353P and RG353V.
427
428config DRM_PANEL_NEWVISION_NV3052C
429 tristate "NewVision NV3052C RGB/SPI panel"
430 depends on OF && SPI
431 depends on BACKLIGHT_CLASS_DEVICE
432 select DRM_MIPI_DBI
433 help
434 Say Y here if you want to enable support for the panels built
435 around the NewVision NV3052C display controller.
436
437config DRM_PANEL_NOVATEK_NT35510
438 tristate "Novatek NT35510 RGB panel driver"
439 depends on OF
440 depends on DRM_MIPI_DSI
441 depends on BACKLIGHT_CLASS_DEVICE
442 help
443 Say Y here if you want to enable support for the panels built
444 around the Novatek NT35510 display controller, such as some
445 Hydis panels.
446
447config DRM_PANEL_NOVATEK_NT35560
448 tristate "Novatek NT35560 DSI command mode panel"
449 depends on OF
450 depends on DRM_MIPI_DSI
451 depends on BACKLIGHT_CLASS_DEVICE
452 select VIDEOMODE_HELPERS
453 help
454 Say Y here if you want to enable the Novatek NT35560 display
455 controller. This panel supports DSI in both command and video
456 mode. This supports several panels such as Sony ACX424AKM and
457 ACX424AKP.
458
459config DRM_PANEL_NOVATEK_NT35950
460 tristate "Novatek NT35950 DSI panel"
461 depends on OF
462 depends on DRM_MIPI_DSI
463 depends on BACKLIGHT_CLASS_DEVICE
464 help
465 Say Y here if you want to enable support for the panels built
466 around the Novatek NT35950 display controller, such as some
467 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
468 mobile phones.
469
470config DRM_PANEL_NOVATEK_NT36523
471 tristate "Novatek NT36523 panel driver"
472 depends on OF
473 depends on DRM_MIPI_DSI
474 depends on BACKLIGHT_CLASS_DEVICE
475 help
476 Say Y here if you want to enable support for the panels built
477 around the Novatek NT36523 display controller, such as some
478 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
479
480config DRM_PANEL_NOVATEK_NT36672A
481 tristate "Novatek NT36672A DSI panel"
482 depends on OF
483 depends on DRM_MIPI_DSI
484 depends on BACKLIGHT_CLASS_DEVICE
485 help
486 Say Y here if you want to enable support for the panels built
487 around the Novatek NT36672A display controller, such as some
488 Tianma panels used in a few Xiaomi Poco F1 mobile phones.
489
490config DRM_PANEL_NOVATEK_NT36672E
491 tristate "Novatek NT36672E DSI panel"
492 depends on OF
493 depends on DRM_MIPI_DSI
494 depends on BACKLIGHT_CLASS_DEVICE
495 help
496 Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
497 LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
498 RGB per pixel.
499
500config DRM_PANEL_NOVATEK_NT39016
501 tristate "Novatek NT39016 RGB/SPI panel"
502 depends on OF && SPI
503 depends on BACKLIGHT_CLASS_DEVICE
504 select REGMAP_SPI
505 help
506 Say Y here if you want to enable support for the panels built
507 around the Novatek NT39016 display controller.
508
509config DRM_PANEL_OLIMEX_LCD_OLINUXINO
510 tristate "Olimex LCD-OLinuXino panel"
511 depends on OF
512 depends on I2C
513 depends on BACKLIGHT_CLASS_DEVICE
514 select CRC32
515 help
516 The panel is used with different sizes LCDs, from 480x272 to
517 1280x800, and 24 bit per pixel.
518
519 Say Y here if you want to enable support for Olimex Ltd.
520 LCD-OLinuXino panel.
521
522config DRM_PANEL_ORISETECH_OTA5601A
523 tristate "Orise Technology ota5601a RGB/SPI panel"
524 depends on SPI
525 depends on BACKLIGHT_CLASS_DEVICE
526 select REGMAP_SPI
527 help
528 Say Y here if you want to enable support for the panels built
529 around the Orise Technology OTA9601A display controller.
530
531config DRM_PANEL_ORISETECH_OTM8009A
532 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
533 depends on OF
534 depends on DRM_MIPI_DSI
535 depends on BACKLIGHT_CLASS_DEVICE
536 help
537 Say Y here if you want to enable support for Orise Technology
538 otm8009a 480x800 dsi 2dl panel.
539
540config DRM_PANEL_OSD_OSD101T2587_53TS
541 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
542 depends on OF
543 depends on DRM_MIPI_DSI
544 depends on BACKLIGHT_CLASS_DEVICE
545 help
546 Say Y here if you want to enable support for One Stop Displays
547 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
548
549config DRM_PANEL_PANASONIC_VVX10F034N00
550 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
551 depends on OF
552 depends on DRM_MIPI_DSI
553 depends on BACKLIGHT_CLASS_DEVICE
554 help
555 Say Y here if you want to enable support for Panasonic VVX10F034N00
556 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
557 Xperia Z2 tablets
558
559config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
560 tristate "Raspberry Pi 7-inch touchscreen panel"
561 depends on DRM_MIPI_DSI
562 help
563 Say Y here if you want to enable support for the Raspberry
564 Pi 7" Touchscreen. To compile this driver as a module,
565 choose M here.
566
567config DRM_PANEL_RAYDIUM_RM67191
568 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
569 depends on OF
570 depends on DRM_MIPI_DSI
571 depends on BACKLIGHT_CLASS_DEVICE
572 help
573 Say Y here if you want to enable support for Raydium RM67191 FHD
574 (1080x1920) DSI panel.
575
576config DRM_PANEL_RAYDIUM_RM68200
577 tristate "Raydium RM68200 720x1280 DSI video mode panel"
578 depends on OF
579 depends on DRM_MIPI_DSI
580 depends on BACKLIGHT_CLASS_DEVICE
581 help
582 Say Y here if you want to enable support for Raydium RM68200
583 720x1280 DSI video mode panel.
584
585config DRM_PANEL_RAYDIUM_RM692E5
586 tristate "Raydium RM692E5-based DSI panel"
587 depends on OF
588 depends on DRM_MIPI_DSI
589 depends on BACKLIGHT_CLASS_DEVICE
590 select DRM_DISPLAY_DSC_HELPER
591 select DRM_DISPLAY_HELPER
592 help
593 Say Y here if you want to enable support for Raydium RM692E5-based
594 display panels, such as the one found in the Fairphone 5 smartphone.
595
596config DRM_PANEL_RAYDIUM_RM69380
597 tristate "Raydium RM69380-based DSI panel"
598 depends on OF && GPIOLIB
599 depends on DRM_MIPI_DSI
600 depends on BACKLIGHT_CLASS_DEVICE
601 help
602 Say Y here if you want to enable support for Raydium RM69380-based
603 display panels.
604
605 This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
606 in combination with an EDO OLED panel.
607
608config DRM_PANEL_RONBO_RB070D30
609 tristate "Ronbo Electronics RB070D30 panel"
610 depends on OF
611 depends on DRM_MIPI_DSI
612 depends on BACKLIGHT_CLASS_DEVICE
613 help
614 Say Y here if you want to enable support for Ronbo Electronics
615 RB070D30 1024x600 DSI panel.
616
617config DRM_PANEL_SAMSUNG_AMS581VF01
618 tristate "Samsung AMS581VF01 panel"
619 depends on OF
620 depends on DRM_MIPI_DSI
621 depends on BACKLIGHT_CLASS_DEVICE
622 help
623 Say Y or M here if you want to enable support for the
624 Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
625
626config DRM_PANEL_SAMSUNG_AMS639RQ08
627 tristate "Samsung AMS639RQ08 panel"
628 depends on OF
629 depends on DRM_MIPI_DSI
630 depends on BACKLIGHT_CLASS_DEVICE
631 help
632 Say Y or M here if you want to enable support for the
633 Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
634
635config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
636 tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
637 depends on GPIOLIB && OF && REGULATOR
638 depends on DRM_MIPI_DSI
639 depends on BACKLIGHT_CLASS_DEVICE
640 help
641 Say Y here if you want to enable support for Samsung AMS427AP24 panel
642 with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
643 GT-I9195I). To compile this driver as a module, choose M here.
644
645config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
646 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
647 depends on OF
648 select DRM_MIPI_DSI
649 select VIDEOMODE_HELPERS
650
651config DRM_PANEL_SAMSUNG_ATNA33XC20
652 tristate "Samsung ATNA33XC20 eDP panel"
653 depends on OF
654 depends on BACKLIGHT_CLASS_DEVICE
655 depends on PM
656 select DRM_DISPLAY_DP_HELPER
657 select DRM_DISPLAY_HELPER
658 select DRM_DISPLAY_DP_AUX_BUS
659 help
660 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
661 be handled by the DRM_PANEL_SIMPLE driver because its power
662 sequencing is non-standard.
663
664config DRM_PANEL_SAMSUNG_DB7430
665 tristate "Samsung DB7430-based DPI panels"
666 depends on OF && SPI && GPIOLIB
667 depends on BACKLIGHT_CLASS_DEVICE
668 select DRM_MIPI_DBI
669 help
670 Say Y here if you want to enable support for the Samsung
671 DB7430 DPI display controller used in such devices as the
672 LMS397KF04 480x800 DPI panel.
673
674config DRM_PANEL_SAMSUNG_LD9040
675 tristate "Samsung LD9040 RGB/SPI panel"
676 depends on OF && SPI
677 depends on BACKLIGHT_CLASS_DEVICE
678 select VIDEOMODE_HELPERS
679
680config DRM_PANEL_SAMSUNG_S6E3FA7
681 tristate "Samsung S6E3FA7 panel driver"
682 depends on OF
683 depends on DRM_MIPI_DSI
684 depends on BACKLIGHT_CLASS_DEVICE
685 help
686 Say Y here if you want to enable support for the Samsung S6E3FA7
687 1920x2220 panel.
688
689config DRM_PANEL_SAMSUNG_S6D16D0
690 tristate "Samsung S6D16D0 DSI video mode panel"
691 depends on OF
692 depends on DRM_MIPI_DSI
693 select VIDEOMODE_HELPERS
694
695config DRM_PANEL_SAMSUNG_S6D27A1
696 tristate "Samsung S6D27A1 DPI panel driver"
697 depends on OF && SPI && GPIOLIB
698 select DRM_MIPI_DBI
699 help
700 Say Y here if you want to enable support for the Samsung
701 S6D27A1 DPI 480x800 panel.
702
703 This panel can be found in Samsung Galaxy Ace 2
704 GT-I8160 mobile phone.
705
706config DRM_PANEL_SAMSUNG_S6D7AA0
707 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
708 depends on OF
709 depends on BACKLIGHT_CLASS_DEVICE
710 select DRM_MIPI_DSI
711 select VIDEOMODE_HELPERS
712
713config DRM_PANEL_SAMSUNG_S6E3HA2
714 tristate "Samsung S6E3HA2 DSI video mode panel"
715 depends on OF
716 depends on DRM_MIPI_DSI
717 depends on BACKLIGHT_CLASS_DEVICE
718 select VIDEOMODE_HELPERS
719
720config DRM_PANEL_SAMSUNG_S6E3HA8
721 tristate "Samsung S6E3HA8 DSI video mode panel"
722 depends on OF
723 depends on DRM_MIPI_DSI
724 depends on BACKLIGHT_CLASS_DEVICE
725 select DRM_DISPLAY_DSC_HELPER
726 select VIDEOMODE_HELPERS
727
728config DRM_PANEL_SAMSUNG_S6E63J0X03
729 tristate "Samsung S6E63J0X03 DSI command mode panel"
730 depends on OF
731 depends on DRM_MIPI_DSI
732 depends on BACKLIGHT_CLASS_DEVICE
733 select VIDEOMODE_HELPERS
734
735config DRM_PANEL_SAMSUNG_S6E63M0
736 tristate "Samsung S6E63M0 RGB panel"
737 depends on OF
738 depends on BACKLIGHT_CLASS_DEVICE
739 help
740 Say Y here if you want to enable support for Samsung S6E63M0
741 AMOLED LCD panel. This panel can be accessed using SPI or
742 DSI.
743
744config DRM_PANEL_SAMSUNG_S6E63M0_SPI
745 tristate "Samsung S6E63M0 RGB SPI interface"
746 depends on SPI
747 depends on DRM_PANEL_SAMSUNG_S6E63M0
748 default DRM_PANEL_SAMSUNG_S6E63M0
749 select DRM_MIPI_DBI
750 help
751 Say Y here if you want to be able to access the Samsung
752 S6E63M0 panel using SPI.
753
754config DRM_PANEL_SAMSUNG_S6E63M0_DSI
755 tristate "Samsung S6E63M0 RGB DSI interface"
756 depends on DRM_MIPI_DSI
757 depends on DRM_PANEL_SAMSUNG_S6E63M0
758 help
759 Say Y here if you want to be able to access the Samsung
760 S6E63M0 panel using DSI.
761
762config DRM_PANEL_SAMSUNG_S6E8AA0
763 tristate "Samsung S6E8AA0 DSI video mode panel"
764 depends on OF
765 select DRM_MIPI_DSI
766 select VIDEOMODE_HELPERS
767
768config DRM_PANEL_SAMSUNG_SOFEF00
769 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
770 depends on OF
771 depends on DRM_MIPI_DSI
772 depends on BACKLIGHT_CLASS_DEVICE
773 select VIDEOMODE_HELPERS
774 help
775 Say Y or M here if you want to enable support for the Samsung AMOLED
776 command mode panels found in the OnePlus 6/6T smartphones.
777
778 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
779
780config DRM_PANEL_SEIKO_43WVF1G
781 tristate "Seiko 43WVF1G panel"
782 depends on OF
783 depends on BACKLIGHT_CLASS_DEVICE
784 select VIDEOMODE_HELPERS
785 help
786 Say Y here if you want to enable support for the Seiko
787 43WVF1G controller for 800x480 LCD panels
788
789config DRM_PANEL_SHARP_LQ101R1SX01
790 tristate "Sharp LQ101R1SX01 panel"
791 depends on OF
792 depends on DRM_MIPI_DSI
793 depends on BACKLIGHT_CLASS_DEVICE
794 help
795 Say Y here if you want to enable support for Sharp LQ101R1SX01
796 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
797 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
798 the host and has a built-in LED backlight.
799
800 To compile this driver as a module, choose M here: the module
801 will be called panel-sharp-lq101r1sx01.
802
803config DRM_PANEL_SHARP_LS037V7DW01
804 tristate "Sharp LS037V7DW01 VGA LCD panel"
805 depends on GPIOLIB && OF && REGULATOR
806 help
807 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
808 (480x640) LCD panel (found on the TI SDP3430 board).
809
810config DRM_PANEL_SHARP_LS043T1LE01
811 tristate "Sharp LS043T1LE01 qHD video mode panel"
812 depends on OF
813 depends on DRM_MIPI_DSI
814 depends on BACKLIGHT_CLASS_DEVICE
815 help
816 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
817 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
818
819config DRM_PANEL_SHARP_LS060T1SX01
820 tristate "Sharp LS060T1SX01 FullHD video mode panel"
821 depends on OF
822 depends on DRM_MIPI_DSI
823 depends on BACKLIGHT_CLASS_DEVICE
824 help
825 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
826 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
827 Bundle.
828
829config DRM_PANEL_SITRONIX_ST7701
830 tristate "Sitronix ST7701 panel driver"
831 depends on OF
832 depends on SPI || DRM_MIPI_DSI
833 select DRM_MIPI_DBI if SPI
834 depends on BACKLIGHT_CLASS_DEVICE
835 help
836 Say Y here if you want to enable support for the Sitronix
837 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
838 system interfaces.
839
840config DRM_PANEL_SITRONIX_ST7703
841 tristate "Sitronix ST7703 based MIPI touchscreen panels"
842 depends on OF
843 depends on DRM_MIPI_DSI
844 depends on BACKLIGHT_CLASS_DEVICE
845 help
846 Say Y here if you want to enable support for Sitronix ST7703 based
847 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
848 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
849 in backlight and touch controller.
850 Touch input support is provided by the goodix driver and needs to be
851 selected separately.
852
853config DRM_PANEL_SITRONIX_ST7789V
854 tristate "Sitronix ST7789V panel"
855 depends on OF && SPI
856 depends on BACKLIGHT_CLASS_DEVICE
857 help
858 Say Y here if you want to enable support for the Sitronix
859 ST7789V controller for 240x320 LCD panels
860
861config DRM_PANEL_SONY_ACX565AKM
862 tristate "Sony ACX565AKM panel"
863 depends on GPIOLIB && OF && SPI
864 depends on BACKLIGHT_CLASS_DEVICE
865 help
866 Say Y here if you want to enable support for the Sony ACX565AKM
867 800x600 3.5" panel (found on the Nokia N900).
868
869config DRM_PANEL_SONY_TD4353_JDI
870 tristate "Sony TD4353 JDI panel"
871 depends on GPIOLIB && OF
872 depends on DRM_MIPI_DSI
873 depends on BACKLIGHT_CLASS_DEVICE
874 help
875 Say Y here if you want to enable support for the Sony Tama
876 TD4353 JDI command mode panel as found on some Sony Xperia
877 XZ2 and XZ2 Compact smartphones.
878
879config DRM_PANEL_SONY_TULIP_TRULY_NT35521
880 tristate "Sony Tulip Truly NT35521 panel"
881 depends on GPIOLIB && OF
882 depends on DRM_MIPI_DSI
883 depends on BACKLIGHT_CLASS_DEVICE
884 help
885 Say Y here if you want to enable support for the Sony Tulip
886 NT35521 1280x720 video mode panel as found on Sony Xperia M4
887 Aqua phone.
888
889config DRM_PANEL_STARTEK_KD070FHFID015
890 tristate "STARTEK KD070FHFID015 panel"
891 depends on OF
892 depends on DRM_MIPI_DSI
893 depends on BACKLIGHT_CLASS_DEVICE
894 help
895 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
896 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
897 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
898 the host, a built-in LED backlight and touch controller.
899
900config DRM_PANEL_EDP
901 tristate "support for simple Embedded DisplayPort panels"
902 depends on OF
903 depends on BACKLIGHT_CLASS_DEVICE
904 depends on PM
905 select VIDEOMODE_HELPERS
906 select DRM_DISPLAY_DP_HELPER
907 select DRM_DISPLAY_HELPER
908 select DRM_DISPLAY_DP_AUX_BUS
909 select DRM_KMS_HELPER
910 help
911 DRM panel driver for dumb eDP panels that need at most a regulator and
912 a GPIO to be powered up. Optionally a backlight can be attached so
913 that it can be automatically turned off when the panel goes into a
914 low power state.
915
916config DRM_PANEL_SIMPLE
917 tristate "support for simple panels (other than eDP ones)"
918 depends on OF
919 depends on BACKLIGHT_CLASS_DEVICE
920 depends on PM
921 select VIDEOMODE_HELPERS
922 help
923 DRM panel driver for dumb non-eDP panels that need at most a regulator
924 and a GPIO to be powered up. Optionally a backlight can be attached so
925 that it can be automatically turned off when the panel goes into a
926 low power state.
927
928config DRM_PANEL_SYNAPTICS_R63353
929 tristate "Synaptics R63353-based panels"
930 depends on OF
931 depends on DRM_MIPI_DSI
932 depends on BACKLIGHT_CLASS_DEVICE
933 help
934 Say Y if you want to enable support for panels based on the
935 Synaptics R63353 controller.
936
937config DRM_PANEL_TDO_TL070WSH30
938 tristate "TDO TL070WSH30 DSI panel"
939 depends on OF
940 depends on DRM_MIPI_DSI
941 depends on BACKLIGHT_CLASS_DEVICE
942 help
943 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
944 panel module. The panel has a 1024×600 resolution and uses
945 24 bit RGB per pixel. It provides a MIPI DSI interface to
946 the host, a built-in LED backlight and touch controller.
947
948config DRM_PANEL_TPO_TD028TTEC1
949 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
950 depends on OF && SPI
951 depends on BACKLIGHT_CLASS_DEVICE
952 help
953 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
954 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
955
956config DRM_PANEL_TPO_TD043MTEA1
957 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
958 depends on GPIOLIB && OF && REGULATOR && SPI
959 help
960 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
961 4.3" panel (found on the OMAP3 Pandora board).
962
963config DRM_PANEL_TPO_TPG110
964 tristate "TPO TPG 800x400 panel"
965 depends on OF && SPI && GPIOLIB
966 depends on BACKLIGHT_CLASS_DEVICE
967 help
968 Say Y here if you want to enable support for TPO TPG110
969 400CH LTPS TFT LCD Single Chip Digital Driver for up to
970 800x400 LCD panels.
971
972config DRM_PANEL_TRULY_NT35597_WQXGA
973 tristate "Truly WQXGA"
974 depends on OF
975 depends on DRM_MIPI_DSI
976 help
977 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
978 Video Mode panel
979
980config DRM_PANEL_VISIONOX_R66451
981 tristate "Visionox R66451"
982 depends on OF
983 depends on DRM_MIPI_DSI
984 depends on BACKLIGHT_CLASS_DEVICE
985 select DRM_DISPLAY_DSC_HELPER
986 select DRM_DISPLAY_HELPER
987 help
988 Say Y here if you want to enable support for Visionox
989 R66451 1080x2340 AMOLED DSI panel.
990
991config DRM_PANEL_VISIONOX_RM69299
992 tristate "Visionox RM69299"
993 depends on OF
994 depends on DRM_MIPI_DSI
995 help
996 Say Y here if you want to enable support for Visionox
997 RM69299 DSI Video Mode panel.
998
999config DRM_PANEL_VISIONOX_VTDR6130
1000 tristate "Visionox VTDR6130"
1001 depends on OF
1002 depends on DRM_MIPI_DSI
1003 depends on BACKLIGHT_CLASS_DEVICE
1004 help
1005 Say Y here if you want to enable support for Visionox
1006 VTDR6130 1080x2400 AMOLED DSI panel.
1007
1008config DRM_PANEL_WIDECHIPS_WS2401
1009 tristate "Widechips WS2401 DPI panel driver"
1010 depends on SPI && GPIOLIB
1011 depends on BACKLIGHT_CLASS_DEVICE
1012 select DRM_MIPI_DBI
1013 help
1014 Say Y here if you want to enable support for the Widechips WS2401 DPI
1015 480x800 display controller used in panels such as Samsung LMS380KF01.
1016 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1017
1018config DRM_PANEL_XINPENG_XPP055C272
1019 tristate "Xinpeng XPP055C272 panel driver"
1020 depends on OF
1021 depends on DRM_MIPI_DSI
1022 depends on BACKLIGHT_CLASS_DEVICE
1023 help
1024 Say Y here if you want to enable support for the Xinpeng
1025 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1026 system interfaces.
1027endmenu
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3 bool
4 depends on DRM
5 help
6 Panel registration and lookup framework.
7
8menu "Display Panels"
9 depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12 tristate "ABT Y030XX067A 320x480 LCD panel"
13 depends on OF && SPI
14 select REGMAP_SPI
15 help
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21 tristate "ARM Versatile panel driver"
22 depends on OF
23 depends on MFD_SYSCON
24 select VIDEOMODE_HELPERS
25 help
26 This driver supports the ARM Versatile panels connected to ARM
27 reference designs. The panel is detected using special registers
28 in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31 tristate "ASUS Z00T TM5P5 NT35596 panel"
32 depends on GPIOLIB && OF
33 depends on DRM_MIPI_DSI
34 depends on BACKLIGHT_CLASS_DEVICE
35 help
36 Say Y here if you want to enable support for the ASUS TMP5P5
37 NT35596 1080x1920 video mode panel as found in some Asus
38 Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41 tristate "AUO A030JTN01"
42 depends on SPI
43 select REGMAP_SPI
44 help
45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46 as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49 tristate "Boe BF060Y8M-AJ0 panel"
50 depends on OF
51 depends on DRM_MIPI_DSI
52 depends on BACKLIGHT_CLASS_DEVICE
53 help
54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57 the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60 tristate "Boe Himax8279d panel"
61 depends on OF
62 depends on DRM_MIPI_DSI
63 depends on BACKLIGHT_CLASS_DEVICE
64 help
65 Say Y here if you want to enable support for Boe Himax8279d
66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67 24 bit RGB per pixel. It provides a MIPI DSI interface to
68 the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TV101WUM_NL6
71 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
72 depends on OF
73 depends on DRM_MIPI_DSI
74 depends on BACKLIGHT_CLASS_DEVICE
75 help
76 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
77 45NA WUXGA PANEL DSI Video Mode panel
78
79config DRM_PANEL_DSI_CM
80 tristate "Generic DSI command mode panels"
81 depends on OF
82 depends on DRM_MIPI_DSI
83 depends on BACKLIGHT_CLASS_DEVICE
84 help
85 DRM panel driver for DSI command mode panels with support for
86 embedded and external backlights.
87
88config DRM_PANEL_LVDS
89 tristate "Generic LVDS panel driver"
90 depends on OF
91 depends on BACKLIGHT_CLASS_DEVICE
92 select VIDEOMODE_HELPERS
93 help
94 This driver supports LVDS panels that don't require device-specific
95 handling of power supplies or control signals. It implements automatic
96 backlight handling if the panel is attached to a backlight controller.
97
98config DRM_PANEL_SIMPLE
99 tristate "support for simple panels (other than eDP ones)"
100 depends on OF
101 depends on BACKLIGHT_CLASS_DEVICE
102 depends on PM
103 select VIDEOMODE_HELPERS
104 help
105 DRM panel driver for dumb non-eDP panels that need at most a regulator
106 and a GPIO to be powered up. Optionally a backlight can be attached so
107 that it can be automatically turned off when the panel goes into a
108 low power state.
109
110config DRM_PANEL_EDP
111 tristate "support for simple Embedded DisplayPort panels"
112 depends on OF
113 depends on BACKLIGHT_CLASS_DEVICE
114 depends on PM
115 select VIDEOMODE_HELPERS
116 select DRM_DISPLAY_DP_HELPER
117 select DRM_DISPLAY_HELPER
118 select DRM_DP_AUX_BUS
119 select DRM_KMS_HELPER
120 help
121 DRM panel driver for dumb eDP panels that need at most a regulator and
122 a GPIO to be powered up. Optionally a backlight can be attached so
123 that it can be automatically turned off when the panel goes into a
124 low power state.
125
126config DRM_PANEL_EBBG_FT8719
127 tristate "EBBG FT8719 panel driver"
128 depends on OF
129 depends on DRM_MIPI_DSI
130 depends on BACKLIGHT_CLASS_DEVICE
131 help
132 Say Y here if you want to enable support for the EBBG FT8719
133 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
134 The panel has a resolution of 1080x2246. It provides a MIPI DSI
135 interface to the host.
136
137config DRM_PANEL_ELIDA_KD35T133
138 tristate "Elida KD35T133 panel driver"
139 depends on OF
140 depends on DRM_MIPI_DSI
141 depends on BACKLIGHT_CLASS_DEVICE
142 help
143 Say Y here if you want to enable support for the Elida
144 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
145 system interfaces.
146
147config DRM_PANEL_FEIXIN_K101_IM2BA02
148 tristate "Feixin K101 IM2BA02 panel"
149 depends on OF
150 depends on DRM_MIPI_DSI
151 depends on BACKLIGHT_CLASS_DEVICE
152 help
153 Say Y here if you want to enable support for the Feixin K101 IM2BA02
154 4-lane 800x1280 MIPI DSI panel.
155
156config DRM_PANEL_FEIYANG_FY07024DI26A30D
157 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
158 depends on OF
159 depends on DRM_MIPI_DSI
160 depends on BACKLIGHT_CLASS_DEVICE
161 help
162 Say Y if you want to enable support for panels based on the
163 Feiyang FY07024DI26A30-D MIPI-DSI interface.
164
165config DRM_PANEL_HIMAX_HX8394
166 tristate "HIMAX HX8394 MIPI-DSI LCD panels"
167 depends on OF
168 depends on DRM_MIPI_DSI
169 depends on BACKLIGHT_CLASS_DEVICE
170 help
171 Say Y if you want to enable support for panels based on the
172 Himax HX8394 controller, such as the HannStar HSD060BHW4
173 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
174
175 If M is selected the module will be called panel-himax-hx8394.
176
177config DRM_PANEL_ILITEK_IL9322
178 tristate "Ilitek ILI9322 320x240 QVGA panels"
179 depends on OF && SPI
180 select REGMAP
181 help
182 Say Y here if you want to enable support for Ilitek IL9322
183 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
184
185config DRM_PANEL_ILITEK_ILI9341
186 tristate "Ilitek ILI9341 240x320 QVGA panels"
187 depends on OF && SPI
188 select DRM_KMS_HELPER
189 select DRM_GEM_DMA_HELPER
190 depends on BACKLIGHT_CLASS_DEVICE
191 select DRM_MIPI_DBI
192 help
193 Say Y here if you want to enable support for Ilitek IL9341
194 QVGA (240x320) RGB panels. support serial & parallel rgb
195 interface.
196
197config DRM_PANEL_ILITEK_ILI9805
198 tristate "Ilitek ILI9805-based panels"
199 depends on OF
200 depends on DRM_MIPI_DSI
201 depends on BACKLIGHT_CLASS_DEVICE
202 help
203 Say Y if you want to enable support for panels based on the
204 Ilitek ILI9805 controller.
205
206config DRM_PANEL_ILITEK_ILI9881C
207 tristate "Ilitek ILI9881C-based panels"
208 depends on OF
209 depends on DRM_MIPI_DSI
210 depends on BACKLIGHT_CLASS_DEVICE
211 help
212 Say Y if you want to enable support for panels based on the
213 Ilitek ILI9881c controller.
214
215config DRM_PANEL_ILITEK_ILI9882T
216 tristate "Ilitek ILI9882t-based panels"
217 depends on OF
218 depends on DRM_MIPI_DSI
219 depends on BACKLIGHT_CLASS_DEVICE
220 help
221 Say Y if you want to enable support for panels based on the
222 Ilitek ILI9882t controller.
223
224config DRM_PANEL_INNOLUX_EJ030NA
225 tristate "Innolux EJ030NA 320x480 LCD panel"
226 depends on OF && SPI
227 select REGMAP_SPI
228 help
229 Say Y here to enable support for the Innolux/Chimei EJ030NA
230 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
231 and LDK handheld gaming consoles.
232
233config DRM_PANEL_INNOLUX_P079ZCA
234 tristate "Innolux P079ZCA panel"
235 depends on OF
236 depends on DRM_MIPI_DSI
237 depends on BACKLIGHT_CLASS_DEVICE
238 help
239 Say Y here if you want to enable support for Innolux P079ZCA
240 TFT-LCD modules. The panel has a 1024x768 resolution and uses
241 24 bit RGB per pixel. It provides a MIPI DSI interface to
242 the host and has a built-in LED backlight.
243
244config DRM_PANEL_JADARD_JD9365DA_H3
245 tristate "Jadard JD9365DA-H3 WXGA DSI panel"
246 depends on OF
247 depends on DRM_MIPI_DSI
248 depends on BACKLIGHT_CLASS_DEVICE
249 help
250 Say Y here if you want to enable support for Jadard JD9365DA-H3
251 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
252 800RGBx1280 dots at maximum.
253
254config DRM_PANEL_JDI_LT070ME05000
255 tristate "JDI LT070ME05000 WUXGA DSI panel"
256 depends on OF
257 depends on DRM_MIPI_DSI
258 depends on BACKLIGHT_CLASS_DEVICE
259 help
260 Say Y here if you want to enable support for JDI DSI video mode
261 panel as found in Google Nexus 7 (2013) devices.
262 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
263 24 bit per pixel.
264
265config DRM_PANEL_JDI_LPM102A188A
266 tristate "JDI LPM102A188A DSI panel"
267 depends on OF && GPIOLIB
268 depends on DRM_MIPI_DSI
269 depends on BACKLIGHT_CLASS_DEVICE
270 help
271 Say Y here if you want to enable support for JDI LPM102A188A DSI
272 command mode panel as found in Google Pixel C devices.
273 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
274 to the host.
275
276config DRM_PANEL_JDI_R63452
277 tristate "JDI R63452 Full HD DSI panel"
278 depends on OF
279 depends on DRM_MIPI_DSI
280 depends on BACKLIGHT_CLASS_DEVICE
281 help
282 Say Y here if you want to enable support for the JDI R63452
283 DSI command mode panel as found in Xiaomi Mi 5 Devices.
284
285config DRM_PANEL_KHADAS_TS050
286 tristate "Khadas TS050 panel"
287 depends on OF
288 depends on DRM_MIPI_DSI
289 depends on BACKLIGHT_CLASS_DEVICE
290 help
291 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
292 panel module. The panel has a 1080x1920 resolution and uses
293 24 bit RGB per pixel. It provides a MIPI DSI interface to
294 the host, a built-in LED backlight and touch controller.
295
296config DRM_PANEL_KINGDISPLAY_KD097D04
297 tristate "Kingdisplay kd097d04 panel"
298 depends on OF
299 depends on DRM_MIPI_DSI
300 depends on BACKLIGHT_CLASS_DEVICE
301 help
302 Say Y here if you want to enable support for Kingdisplay kd097d04
303 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
304 24 bit RGB per pixel. It provides a MIPI DSI interface to
305 the host and has a built-in LED backlight.
306
307config DRM_PANEL_LEADTEK_LTK050H3146W
308 tristate "Leadtek LTK050H3146W panel"
309 depends on OF
310 depends on DRM_MIPI_DSI
311 depends on BACKLIGHT_CLASS_DEVICE
312 help
313 Say Y here if you want to enable support for Leadtek LTK050H3146W
314 TFT-LCD modules. The panel has a 720x1280 resolution and uses
315 24 bit RGB per pixel. It provides a MIPI DSI interface to
316 the host and has a built-in LED backlight.
317
318config DRM_PANEL_LEADTEK_LTK500HD1829
319 tristate "Leadtek LTK500HD1829 panel"
320 depends on OF
321 depends on DRM_MIPI_DSI
322 depends on BACKLIGHT_CLASS_DEVICE
323 help
324 Say Y here if you want to enable support for Kingdisplay kd097d04
325 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
326 24 bit RGB per pixel. It provides a MIPI DSI interface to
327 the host and has a built-in LED backlight.
328
329config DRM_PANEL_SAMSUNG_LD9040
330 tristate "Samsung LD9040 RGB/SPI panel"
331 depends on OF && SPI
332 depends on BACKLIGHT_CLASS_DEVICE
333 select VIDEOMODE_HELPERS
334
335config DRM_PANEL_LG_LB035Q02
336 tristate "LG LB035Q024573 RGB panel"
337 depends on GPIOLIB && OF && SPI
338 help
339 Say Y here if you want to enable support for the LB035Q02 RGB panel
340 (found on the Gumstix Overo Palo35 board). To compile this driver as
341 a module, choose M here.
342
343config DRM_PANEL_LG_LG4573
344 tristate "LG4573 RGB/SPI panel"
345 depends on OF && SPI
346 select VIDEOMODE_HELPERS
347 help
348 Say Y here if you want to enable support for LG4573 RGB panel.
349 To compile this driver as a module, choose M here.
350
351config DRM_PANEL_MAGNACHIP_D53E6EA8966
352 tristate "Magnachip D53E6EA8966 DSI panel"
353 depends on OF && SPI
354 depends on DRM_MIPI_DSI
355 depends on BACKLIGHT_CLASS_DEVICE
356 select DRM_MIPI_DBI
357 help
358 DRM panel driver for the Samsung AMS495QA01 panel controlled
359 with the Magnachip D53E6EA8966 panel IC. This panel receives
360 video data via DSI but commands via 9-bit SPI using DBI.
361
362config DRM_PANEL_NEC_NL8048HL11
363 tristate "NEC NL8048HL11 RGB panel"
364 depends on GPIOLIB && OF && SPI
365 help
366 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
367 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
368 as a module, choose M here.
369
370config DRM_PANEL_NEWVISION_NV3051D
371 tristate "NewVision NV3051D DSI panel"
372 depends on OF
373 depends on DRM_MIPI_DSI
374 depends on BACKLIGHT_CLASS_DEVICE
375 help
376 This driver supports the NV3051D based panel found on the Anbernic
377 RG353P and RG353V.
378
379config DRM_PANEL_NEWVISION_NV3052C
380 tristate "NewVision NV3052C RGB/SPI panel"
381 depends on OF && SPI
382 depends on BACKLIGHT_CLASS_DEVICE
383 select DRM_MIPI_DBI
384 help
385 Say Y here if you want to enable support for the panels built
386 around the NewVision NV3052C display controller.
387
388config DRM_PANEL_NOVATEK_NT35510
389 tristate "Novatek NT35510 RGB panel driver"
390 depends on OF
391 depends on DRM_MIPI_DSI
392 depends on BACKLIGHT_CLASS_DEVICE
393 help
394 Say Y here if you want to enable support for the panels built
395 around the Novatek NT35510 display controller, such as some
396 Hydis panels.
397
398config DRM_PANEL_NOVATEK_NT35560
399 tristate "Novatek NT35560 DSI command mode panel"
400 depends on OF
401 depends on DRM_MIPI_DSI
402 depends on BACKLIGHT_CLASS_DEVICE
403 select VIDEOMODE_HELPERS
404 help
405 Say Y here if you want to enable the Novatek NT35560 display
406 controller. This panel supports DSI in both command and video
407 mode. This supports several panels such as Sony ACX424AKM and
408 ACX424AKP.
409
410config DRM_PANEL_NOVATEK_NT35950
411 tristate "Novatek NT35950 DSI panel"
412 depends on OF
413 depends on DRM_MIPI_DSI
414 depends on BACKLIGHT_CLASS_DEVICE
415 help
416 Say Y here if you want to enable support for the panels built
417 around the Novatek NT35950 display controller, such as some
418 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
419 mobile phones.
420
421config DRM_PANEL_NOVATEK_NT36523
422 tristate "Novatek NT36523 panel driver"
423 depends on OF
424 depends on DRM_MIPI_DSI
425 depends on BACKLIGHT_CLASS_DEVICE
426 help
427 Say Y here if you want to enable support for the panels built
428 around the Novatek NT36523 display controller, such as some
429 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
430
431config DRM_PANEL_NOVATEK_NT36672A
432 tristate "Novatek NT36672A DSI panel"
433 depends on OF
434 depends on DRM_MIPI_DSI
435 depends on BACKLIGHT_CLASS_DEVICE
436 help
437 Say Y here if you want to enable support for the panels built
438 around the Novatek NT36672A display controller, such as some
439 Tianma panels used in a few Xiaomi Poco F1 mobile phones.
440
441config DRM_PANEL_NOVATEK_NT39016
442 tristate "Novatek NT39016 RGB/SPI panel"
443 depends on OF && SPI
444 depends on BACKLIGHT_CLASS_DEVICE
445 select REGMAP_SPI
446 help
447 Say Y here if you want to enable support for the panels built
448 around the Novatek NT39016 display controller.
449
450config DRM_PANEL_MANTIX_MLAF057WE51
451 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
452 depends on OF
453 depends on DRM_MIPI_DSI
454 depends on BACKLIGHT_CLASS_DEVICE
455 help
456 Say Y here if you want to enable support for the Mantix
457 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
458 has a resolution of 720x1440 pixels, a built in backlight and touch
459 controller.
460
461config DRM_PANEL_OLIMEX_LCD_OLINUXINO
462 tristate "Olimex LCD-OLinuXino panel"
463 depends on OF
464 depends on I2C
465 depends on BACKLIGHT_CLASS_DEVICE
466 select CRC32
467 help
468 The panel is used with different sizes LCDs, from 480x272 to
469 1280x800, and 24 bit per pixel.
470
471 Say Y here if you want to enable support for Olimex Ltd.
472 LCD-OLinuXino panel.
473
474config DRM_PANEL_ORISETECH_OTA5601A
475 tristate "Orise Technology ota5601a RGB/SPI panel"
476 depends on SPI
477 depends on BACKLIGHT_CLASS_DEVICE
478 select REGMAP_SPI
479 help
480 Say Y here if you want to enable support for the panels built
481 around the Orise Technology OTA9601A display controller.
482
483config DRM_PANEL_ORISETECH_OTM8009A
484 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
485 depends on OF
486 depends on DRM_MIPI_DSI
487 depends on BACKLIGHT_CLASS_DEVICE
488 help
489 Say Y here if you want to enable support for Orise Technology
490 otm8009a 480x800 dsi 2dl panel.
491
492config DRM_PANEL_OSD_OSD101T2587_53TS
493 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
494 depends on OF
495 depends on DRM_MIPI_DSI
496 depends on BACKLIGHT_CLASS_DEVICE
497 help
498 Say Y here if you want to enable support for One Stop Displays
499 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
500
501config DRM_PANEL_PANASONIC_VVX10F034N00
502 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
503 depends on OF
504 depends on DRM_MIPI_DSI
505 depends on BACKLIGHT_CLASS_DEVICE
506 help
507 Say Y here if you want to enable support for Panasonic VVX10F034N00
508 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
509 Xperia Z2 tablets
510
511config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
512 tristate "Raspberry Pi 7-inch touchscreen panel"
513 depends on DRM_MIPI_DSI
514 help
515 Say Y here if you want to enable support for the Raspberry
516 Pi 7" Touchscreen. To compile this driver as a module,
517 choose M here.
518
519config DRM_PANEL_RAYDIUM_RM67191
520 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
521 depends on OF
522 depends on DRM_MIPI_DSI
523 depends on BACKLIGHT_CLASS_DEVICE
524 help
525 Say Y here if you want to enable support for Raydium RM67191 FHD
526 (1080x1920) DSI panel.
527
528config DRM_PANEL_RAYDIUM_RM68200
529 tristate "Raydium RM68200 720x1280 DSI video mode panel"
530 depends on OF
531 depends on DRM_MIPI_DSI
532 depends on BACKLIGHT_CLASS_DEVICE
533 help
534 Say Y here if you want to enable support for Raydium RM68200
535 720x1280 DSI video mode panel.
536
537config DRM_PANEL_RAYDIUM_RM692E5
538 tristate "Raydium RM692E5-based DSI panel"
539 depends on OF
540 depends on DRM_MIPI_DSI
541 depends on BACKLIGHT_CLASS_DEVICE
542 select DRM_DISPLAY_DP_HELPER
543 select DRM_DISPLAY_HELPER
544 help
545 Say Y here if you want to enable support for Raydium RM692E5-based
546 display panels, such as the one found in the Fairphone 5 smartphone.
547
548config DRM_PANEL_RONBO_RB070D30
549 tristate "Ronbo Electronics RB070D30 panel"
550 depends on OF
551 depends on DRM_MIPI_DSI
552 depends on BACKLIGHT_CLASS_DEVICE
553 help
554 Say Y here if you want to enable support for Ronbo Electronics
555 RB070D30 1024x600 DSI panel.
556
557config DRM_PANEL_SAMSUNG_ATNA33XC20
558 tristate "Samsung ATNA33XC20 eDP panel"
559 depends on OF
560 depends on BACKLIGHT_CLASS_DEVICE
561 depends on PM
562 select DRM_DISPLAY_DP_HELPER
563 select DRM_DISPLAY_HELPER
564 select DRM_DP_AUX_BUS
565 help
566 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
567 be handled by the DRM_PANEL_SIMPLE driver because its power
568 sequencing is non-standard.
569
570config DRM_PANEL_SAMSUNG_DB7430
571 tristate "Samsung DB7430-based DPI panels"
572 depends on OF && SPI && GPIOLIB
573 depends on BACKLIGHT_CLASS_DEVICE
574 select DRM_MIPI_DBI
575 help
576 Say Y here if you want to enable support for the Samsung
577 DB7430 DPI display controller used in such devices as the
578 LMS397KF04 480x800 DPI panel.
579
580config DRM_PANEL_SAMSUNG_S6D16D0
581 tristate "Samsung S6D16D0 DSI video mode panel"
582 depends on OF
583 depends on DRM_MIPI_DSI
584 select VIDEOMODE_HELPERS
585
586config DRM_PANEL_SAMSUNG_S6D27A1
587 tristate "Samsung S6D27A1 DPI panel driver"
588 depends on OF && SPI && GPIOLIB
589 select DRM_MIPI_DBI
590 help
591 Say Y here if you want to enable support for the Samsung
592 S6D27A1 DPI 480x800 panel.
593
594 This panel can be found in Samsung Galaxy Ace 2
595 GT-I8160 mobile phone.
596
597config DRM_PANEL_SAMSUNG_S6D7AA0
598 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
599 depends on OF
600 depends on BACKLIGHT_CLASS_DEVICE
601 select DRM_MIPI_DSI
602 select VIDEOMODE_HELPERS
603
604config DRM_PANEL_SAMSUNG_S6E3HA2
605 tristate "Samsung S6E3HA2 DSI video mode panel"
606 depends on OF
607 depends on DRM_MIPI_DSI
608 depends on BACKLIGHT_CLASS_DEVICE
609 select VIDEOMODE_HELPERS
610
611config DRM_PANEL_SAMSUNG_S6E63J0X03
612 tristate "Samsung S6E63J0X03 DSI command mode panel"
613 depends on OF
614 depends on DRM_MIPI_DSI
615 depends on BACKLIGHT_CLASS_DEVICE
616 select VIDEOMODE_HELPERS
617
618config DRM_PANEL_SAMSUNG_S6E63M0
619 tristate "Samsung S6E63M0 RGB panel"
620 depends on OF
621 depends on BACKLIGHT_CLASS_DEVICE
622 help
623 Say Y here if you want to enable support for Samsung S6E63M0
624 AMOLED LCD panel. This panel can be accessed using SPI or
625 DSI.
626
627config DRM_PANEL_SAMSUNG_S6E63M0_SPI
628 tristate "Samsung S6E63M0 RGB SPI interface"
629 depends on SPI
630 depends on DRM_PANEL_SAMSUNG_S6E63M0
631 default DRM_PANEL_SAMSUNG_S6E63M0
632 select DRM_MIPI_DBI
633 help
634 Say Y here if you want to be able to access the Samsung
635 S6E63M0 panel using SPI.
636
637config DRM_PANEL_SAMSUNG_S6E63M0_DSI
638 tristate "Samsung S6E63M0 RGB DSI interface"
639 depends on DRM_MIPI_DSI
640 depends on DRM_PANEL_SAMSUNG_S6E63M0
641 help
642 Say Y here if you want to be able to access the Samsung
643 S6E63M0 panel using DSI.
644
645config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
646 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
647 depends on OF
648 select DRM_MIPI_DSI
649 select VIDEOMODE_HELPERS
650
651config DRM_PANEL_SAMSUNG_S6E8AA0
652 tristate "Samsung S6E8AA0 DSI video mode panel"
653 depends on OF
654 select DRM_MIPI_DSI
655 select VIDEOMODE_HELPERS
656
657config DRM_PANEL_SAMSUNG_SOFEF00
658 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
659 depends on OF
660 depends on DRM_MIPI_DSI
661 depends on BACKLIGHT_CLASS_DEVICE
662 select VIDEOMODE_HELPERS
663 help
664 Say Y or M here if you want to enable support for the Samsung AMOLED
665 command mode panels found in the OnePlus 6/6T smartphones.
666
667 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
668
669config DRM_PANEL_SEIKO_43WVF1G
670 tristate "Seiko 43WVF1G panel"
671 depends on OF
672 depends on BACKLIGHT_CLASS_DEVICE
673 select VIDEOMODE_HELPERS
674 help
675 Say Y here if you want to enable support for the Seiko
676 43WVF1G controller for 800x480 LCD panels
677
678config DRM_PANEL_SHARP_LQ101R1SX01
679 tristate "Sharp LQ101R1SX01 panel"
680 depends on OF
681 depends on DRM_MIPI_DSI
682 depends on BACKLIGHT_CLASS_DEVICE
683 help
684 Say Y here if you want to enable support for Sharp LQ101R1SX01
685 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
686 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
687 the host and has a built-in LED backlight.
688
689 To compile this driver as a module, choose M here: the module
690 will be called panel-sharp-lq101r1sx01.
691
692config DRM_PANEL_SHARP_LS037V7DW01
693 tristate "Sharp LS037V7DW01 VGA LCD panel"
694 depends on GPIOLIB && OF && REGULATOR
695 help
696 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
697 (480x640) LCD panel (found on the TI SDP3430 board).
698
699config DRM_PANEL_SHARP_LS043T1LE01
700 tristate "Sharp LS043T1LE01 qHD video mode panel"
701 depends on OF
702 depends on DRM_MIPI_DSI
703 depends on BACKLIGHT_CLASS_DEVICE
704 help
705 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
706 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
707
708config DRM_PANEL_SHARP_LS060T1SX01
709 tristate "Sharp LS060T1SX01 FullHD video mode panel"
710 depends on OF
711 depends on DRM_MIPI_DSI
712 depends on BACKLIGHT_CLASS_DEVICE
713 help
714 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
715 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
716 Bundle.
717
718config DRM_PANEL_SITRONIX_ST7701
719 tristate "Sitronix ST7701 panel driver"
720 depends on OF
721 depends on DRM_MIPI_DSI
722 depends on BACKLIGHT_CLASS_DEVICE
723 help
724 Say Y here if you want to enable support for the Sitronix
725 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
726 system interfaces.
727
728config DRM_PANEL_SITRONIX_ST7703
729 tristate "Sitronix ST7703 based MIPI touchscreen panels"
730 depends on OF
731 depends on DRM_MIPI_DSI
732 depends on BACKLIGHT_CLASS_DEVICE
733 help
734 Say Y here if you want to enable support for Sitronix ST7703 based
735 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
736 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
737 in backlight and touch controller.
738 Touch input support is provided by the goodix driver and needs to be
739 selected separately.
740
741config DRM_PANEL_SITRONIX_ST7789V
742 tristate "Sitronix ST7789V panel"
743 depends on OF && SPI
744 depends on BACKLIGHT_CLASS_DEVICE
745 help
746 Say Y here if you want to enable support for the Sitronix
747 ST7789V controller for 240x320 LCD panels
748
749config DRM_PANEL_SYNAPTICS_R63353
750 tristate "Synaptics R63353-based panels"
751 depends on OF
752 depends on DRM_MIPI_DSI
753 depends on BACKLIGHT_CLASS_DEVICE
754 help
755 Say Y if you want to enable support for panels based on the
756 Synaptics R63353 controller.
757
758config DRM_PANEL_SONY_ACX565AKM
759 tristate "Sony ACX565AKM panel"
760 depends on GPIOLIB && OF && SPI
761 depends on BACKLIGHT_CLASS_DEVICE
762 help
763 Say Y here if you want to enable support for the Sony ACX565AKM
764 800x600 3.5" panel (found on the Nokia N900).
765
766config DRM_PANEL_SONY_TD4353_JDI
767 tristate "Sony TD4353 JDI panel"
768 depends on GPIOLIB && OF
769 depends on DRM_MIPI_DSI
770 depends on BACKLIGHT_CLASS_DEVICE
771 help
772 Say Y here if you want to enable support for the Sony Tama
773 TD4353 JDI command mode panel as found on some Sony Xperia
774 XZ2 and XZ2 Compact smartphones.
775
776config DRM_PANEL_SONY_TULIP_TRULY_NT35521
777 tristate "Sony Tulip Truly NT35521 panel"
778 depends on GPIOLIB && OF
779 depends on DRM_MIPI_DSI
780 depends on BACKLIGHT_CLASS_DEVICE
781 help
782 Say Y here if you want to enable support for the Sony Tulip
783 NT35521 1280x720 video mode panel as found on Sony Xperia M4
784 Aqua phone.
785
786config DRM_PANEL_STARTEK_KD070FHFID015
787 tristate "STARTEK KD070FHFID015 panel"
788 depends on OF
789 depends on DRM_MIPI_DSI
790 depends on BACKLIGHT_CLASS_DEVICE
791 help
792 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
793 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
794 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
795 the host, a built-in LED backlight and touch controller.
796
797config DRM_PANEL_TDO_TL070WSH30
798 tristate "TDO TL070WSH30 DSI panel"
799 depends on OF
800 depends on DRM_MIPI_DSI
801 depends on BACKLIGHT_CLASS_DEVICE
802 help
803 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
804 panel module. The panel has a 1024×600 resolution and uses
805 24 bit RGB per pixel. It provides a MIPI DSI interface to
806 the host, a built-in LED backlight and touch controller.
807
808config DRM_PANEL_TPO_TD028TTEC1
809 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
810 depends on OF && SPI
811 depends on BACKLIGHT_CLASS_DEVICE
812 help
813 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
814 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
815
816config DRM_PANEL_TPO_TD043MTEA1
817 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
818 depends on GPIOLIB && OF && REGULATOR && SPI
819 help
820 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
821 4.3" panel (found on the OMAP3 Pandora board).
822
823config DRM_PANEL_TPO_TPG110
824 tristate "TPO TPG 800x400 panel"
825 depends on OF && SPI && GPIOLIB
826 depends on BACKLIGHT_CLASS_DEVICE
827 help
828 Say Y here if you want to enable support for TPO TPG110
829 400CH LTPS TFT LCD Single Chip Digital Driver for up to
830 800x400 LCD panels.
831
832config DRM_PANEL_TRULY_NT35597_WQXGA
833 tristate "Truly WQXGA"
834 depends on OF
835 depends on DRM_MIPI_DSI
836 help
837 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
838 Video Mode panel
839
840config DRM_PANEL_VISIONOX_RM69299
841 tristate "Visionox RM69299"
842 depends on OF
843 depends on DRM_MIPI_DSI
844 help
845 Say Y here if you want to enable support for Visionox
846 RM69299 DSI Video Mode panel.
847
848config DRM_PANEL_VISIONOX_VTDR6130
849 tristate "Visionox VTDR6130"
850 depends on OF
851 depends on DRM_MIPI_DSI
852 depends on BACKLIGHT_CLASS_DEVICE
853 help
854 Say Y here if you want to enable support for Visionox
855 VTDR6130 1080x2400 AMOLED DSI panel.
856
857config DRM_PANEL_VISIONOX_R66451
858 tristate "Visionox R66451"
859 depends on OF
860 depends on DRM_MIPI_DSI
861 depends on BACKLIGHT_CLASS_DEVICE
862 select DRM_DISPLAY_DP_HELPER
863 select DRM_DISPLAY_HELPER
864 help
865 Say Y here if you want to enable support for Visionox
866 R66451 1080x2340 AMOLED DSI panel.
867
868config DRM_PANEL_WIDECHIPS_WS2401
869 tristate "Widechips WS2401 DPI panel driver"
870 depends on SPI && GPIOLIB
871 depends on BACKLIGHT_CLASS_DEVICE
872 select DRM_MIPI_DBI
873 help
874 Say Y here if you want to enable support for the Widechips WS2401 DPI
875 480x800 display controller used in panels such as Samsung LMS380KF01.
876 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
877
878config DRM_PANEL_XINPENG_XPP055C272
879 tristate "Xinpeng XPP055C272 panel driver"
880 depends on OF
881 depends on DRM_MIPI_DSI
882 depends on BACKLIGHT_CLASS_DEVICE
883 help
884 Say Y here if you want to enable support for the Xinpeng
885 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
886 system interfaces.
887endmenu