Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * LP8755 High Performance Power Management Unit : System Interface Driver
4 * (based on rev. 0.26)
5 * Copyright 2012 Texas Instruments
6 *
7 * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com>
8 */
9
10#include <linux/module.h>
11#include <linux/slab.h>
12#include <linux/i2c.h>
13#include <linux/err.h>
14#include <linux/irq.h>
15#include <linux/interrupt.h>
16#include <linux/regmap.h>
17#include <linux/uaccess.h>
18#include <linux/regulator/driver.h>
19#include <linux/regulator/machine.h>
20#include <linux/platform_data/lp8755.h>
21
22#define LP8755_REG_BUCK0 0x00
23#define LP8755_REG_BUCK1 0x03
24#define LP8755_REG_BUCK2 0x04
25#define LP8755_REG_BUCK3 0x01
26#define LP8755_REG_BUCK4 0x05
27#define LP8755_REG_BUCK5 0x02
28#define LP8755_REG_MAX 0xFF
29
30#define LP8755_BUCK_EN_M BIT(7)
31#define LP8755_BUCK_LINEAR_OUT_MAX 0x76
32#define LP8755_BUCK_VOUT_M 0x7F
33
34struct lp8755_mphase {
35 int nreg;
36 int buck_num[LP8755_BUCK_MAX];
37};
38
39struct lp8755_chip {
40 struct device *dev;
41 struct regmap *regmap;
42 struct lp8755_platform_data *pdata;
43
44 int irq;
45 unsigned int irqmask;
46
47 int mphase;
48 struct regulator_dev *rdev[LP8755_BUCK_MAX];
49};
50
51static int lp8755_buck_enable_time(struct regulator_dev *rdev)
52{
53 int ret;
54 unsigned int regval;
55 enum lp8755_bucks id = rdev_get_id(rdev);
56
57 ret = regmap_read(rdev->regmap, 0x12 + id, ®val);
58 if (ret < 0) {
59 dev_err(&rdev->dev, "i2c access error %s\n", __func__);
60 return ret;
61 }
62 return (regval & 0xff) * 100;
63}
64
65static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
66{
67 int ret;
68 unsigned int regbval = 0x0;
69 enum lp8755_bucks id = rdev_get_id(rdev);
70 struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
71
72 switch (mode) {
73 case REGULATOR_MODE_FAST:
74 /* forced pwm mode */
75 regbval = (0x01 << id);
76 break;
77 case REGULATOR_MODE_NORMAL:
78 /* enable automatic pwm/pfm mode */
79 ret = regmap_update_bits(rdev->regmap, 0x08 + id, 0x20, 0x00);
80 if (ret < 0)
81 goto err_i2c;
82 break;
83 case REGULATOR_MODE_IDLE:
84 /* enable automatic pwm/pfm/lppfm mode */
85 ret = regmap_update_bits(rdev->regmap, 0x08 + id, 0x20, 0x20);
86 if (ret < 0)
87 goto err_i2c;
88
89 ret = regmap_update_bits(rdev->regmap, 0x10, 0x01, 0x01);
90 if (ret < 0)
91 goto err_i2c;
92 break;
93 default:
94 dev_err(pchip->dev, "Not supported buck mode %s\n", __func__);
95 /* forced pwm mode */
96 regbval = (0x01 << id);
97 }
98
99 ret = regmap_update_bits(rdev->regmap, 0x06, 0x01 << id, regbval);
100 if (ret < 0)
101 goto err_i2c;
102 return ret;
103err_i2c:
104 dev_err(&rdev->dev, "i2c access error %s\n", __func__);
105 return ret;
106}
107
108static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev)
109{
110 int ret;
111 unsigned int regval;
112 enum lp8755_bucks id = rdev_get_id(rdev);
113
114 ret = regmap_read(rdev->regmap, 0x06, ®val);
115 if (ret < 0)
116 goto err_i2c;
117
118 /* mode fast means forced pwm mode */
119 if (regval & (0x01 << id))
120 return REGULATOR_MODE_FAST;
121
122 ret = regmap_read(rdev->regmap, 0x08 + id, ®val);
123 if (ret < 0)
124 goto err_i2c;
125
126 /* mode idle means automatic pwm/pfm/lppfm mode */
127 if (regval & 0x20)
128 return REGULATOR_MODE_IDLE;
129
130 /* mode normal means automatic pwm/pfm mode */
131 return REGULATOR_MODE_NORMAL;
132
133err_i2c:
134 dev_err(&rdev->dev, "i2c access error %s\n", __func__);
135 return 0;
136}
137
138static const unsigned int lp8755_buck_ramp_table[] = {
139 30000, 15000, 7500, 3800, 1900, 940, 470, 230
140};
141
142static const struct regulator_ops lp8755_buck_ops = {
143 .map_voltage = regulator_map_voltage_linear,
144 .list_voltage = regulator_list_voltage_linear,
145 .set_voltage_sel = regulator_set_voltage_sel_regmap,
146 .get_voltage_sel = regulator_get_voltage_sel_regmap,
147 .enable = regulator_enable_regmap,
148 .disable = regulator_disable_regmap,
149 .is_enabled = regulator_is_enabled_regmap,
150 .enable_time = lp8755_buck_enable_time,
151 .set_mode = lp8755_buck_set_mode,
152 .get_mode = lp8755_buck_get_mode,
153 .set_ramp_delay = regulator_set_ramp_delay_regmap,
154};
155
156#define lp8755_rail(_id) "lp8755_buck"#_id
157#define lp8755_buck_init(_id)\
158{\
159 .constraints = {\
160 .name = lp8755_rail(_id),\
161 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,\
162 .min_uV = 500000,\
163 .max_uV = 1675000,\
164 },\
165}
166
167static struct regulator_init_data lp8755_reg_default[LP8755_BUCK_MAX] = {
168 [LP8755_BUCK0] = lp8755_buck_init(0),
169 [LP8755_BUCK1] = lp8755_buck_init(1),
170 [LP8755_BUCK2] = lp8755_buck_init(2),
171 [LP8755_BUCK3] = lp8755_buck_init(3),
172 [LP8755_BUCK4] = lp8755_buck_init(4),
173 [LP8755_BUCK5] = lp8755_buck_init(5),
174};
175
176static const struct lp8755_mphase mphase_buck[MPHASE_CONF_MAX] = {
177 { 3, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK5 } },
178 { 6, { LP8755_BUCK0, LP8755_BUCK1, LP8755_BUCK2, LP8755_BUCK3,
179 LP8755_BUCK4, LP8755_BUCK5 } },
180 { 5, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK4,
181 LP8755_BUCK5} },
182 { 4, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK4, LP8755_BUCK5} },
183 { 3, { LP8755_BUCK0, LP8755_BUCK4, LP8755_BUCK5} },
184 { 2, { LP8755_BUCK0, LP8755_BUCK5} },
185 { 1, { LP8755_BUCK0} },
186 { 2, { LP8755_BUCK0, LP8755_BUCK3} },
187 { 4, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK5} },
188};
189
190static int lp8755_init_data(struct lp8755_chip *pchip)
191{
192 unsigned int regval;
193 int ret, icnt, buck_num;
194 struct lp8755_platform_data *pdata = pchip->pdata;
195
196 /* read back muti-phase configuration */
197 ret = regmap_read(pchip->regmap, 0x3D, ®val);
198 if (ret < 0)
199 goto out_i2c_error;
200 pchip->mphase = regval & 0x0F;
201
202 /* set default data based on multi-phase config */
203 for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
204 buck_num = mphase_buck[pchip->mphase].buck_num[icnt];
205 pdata->buck_data[buck_num] = &lp8755_reg_default[buck_num];
206 }
207 return ret;
208
209out_i2c_error:
210 dev_err(pchip->dev, "i2c access error %s\n", __func__);
211 return ret;
212}
213
214#define lp8755_buck_desc(_id)\
215{\
216 .name = lp8755_rail(_id),\
217 .id = LP8755_BUCK##_id,\
218 .ops = &lp8755_buck_ops,\
219 .n_voltages = LP8755_BUCK_LINEAR_OUT_MAX+1,\
220 .uV_step = 10000,\
221 .min_uV = 500000,\
222 .type = REGULATOR_VOLTAGE,\
223 .owner = THIS_MODULE,\
224 .enable_reg = LP8755_REG_BUCK##_id,\
225 .enable_mask = LP8755_BUCK_EN_M,\
226 .vsel_reg = LP8755_REG_BUCK##_id,\
227 .vsel_mask = LP8755_BUCK_VOUT_M,\
228 .ramp_reg = (LP8755_BUCK##_id) + 0x7,\
229 .ramp_mask = 0x7,\
230 .ramp_delay_table = lp8755_buck_ramp_table,\
231 .n_ramp_values = ARRAY_SIZE(lp8755_buck_ramp_table),\
232}
233
234static const struct regulator_desc lp8755_regulators[] = {
235 lp8755_buck_desc(0),
236 lp8755_buck_desc(1),
237 lp8755_buck_desc(2),
238 lp8755_buck_desc(3),
239 lp8755_buck_desc(4),
240 lp8755_buck_desc(5),
241};
242
243static int lp8755_regulator_init(struct lp8755_chip *pchip)
244{
245 int ret, icnt, buck_num;
246 struct lp8755_platform_data *pdata = pchip->pdata;
247 struct regulator_config rconfig = { };
248
249 rconfig.regmap = pchip->regmap;
250 rconfig.dev = pchip->dev;
251 rconfig.driver_data = pchip;
252
253 for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
254 buck_num = mphase_buck[pchip->mphase].buck_num[icnt];
255 rconfig.init_data = pdata->buck_data[buck_num];
256 rconfig.of_node = pchip->dev->of_node;
257 pchip->rdev[buck_num] =
258 devm_regulator_register(pchip->dev,
259 &lp8755_regulators[buck_num], &rconfig);
260 if (IS_ERR(pchip->rdev[buck_num])) {
261 ret = PTR_ERR(pchip->rdev[buck_num]);
262 pchip->rdev[buck_num] = NULL;
263 dev_err(pchip->dev, "regulator init failed: buck %d\n",
264 buck_num);
265 return ret;
266 }
267 }
268
269 return 0;
270}
271
272static irqreturn_t lp8755_irq_handler(int irq, void *data)
273{
274 int ret, icnt;
275 unsigned int flag0, flag1;
276 struct lp8755_chip *pchip = data;
277
278 /* read flag0 register */
279 ret = regmap_read(pchip->regmap, 0x0D, &flag0);
280 if (ret < 0)
281 goto err_i2c;
282 /* clear flag register to pull up int. pin */
283 ret = regmap_write(pchip->regmap, 0x0D, 0x00);
284 if (ret < 0)
285 goto err_i2c;
286
287 /* sent power fault detection event to specific regulator */
288 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
289 if ((flag0 & (0x4 << icnt))
290 && (pchip->irqmask & (0x04 << icnt))
291 && (pchip->rdev[icnt] != NULL)) {
292 regulator_notifier_call_chain(pchip->rdev[icnt],
293 LP8755_EVENT_PWR_FAULT,
294 NULL);
295 }
296
297 /* read flag1 register */
298 ret = regmap_read(pchip->regmap, 0x0E, &flag1);
299 if (ret < 0)
300 goto err_i2c;
301 /* clear flag register to pull up int. pin */
302 ret = regmap_write(pchip->regmap, 0x0E, 0x00);
303 if (ret < 0)
304 goto err_i2c;
305
306 /* send OCP event to all regulator devices */
307 if ((flag1 & 0x01) && (pchip->irqmask & 0x01))
308 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
309 if (pchip->rdev[icnt] != NULL) {
310 regulator_notifier_call_chain(pchip->rdev[icnt],
311 LP8755_EVENT_OCP,
312 NULL);
313 }
314
315 /* send OVP event to all regulator devices */
316 if ((flag1 & 0x02) && (pchip->irqmask & 0x02))
317 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
318 if (pchip->rdev[icnt] != NULL) {
319 regulator_notifier_call_chain(pchip->rdev[icnt],
320 LP8755_EVENT_OVP,
321 NULL);
322 }
323 return IRQ_HANDLED;
324
325err_i2c:
326 dev_err(pchip->dev, "i2c access error %s\n", __func__);
327 return IRQ_NONE;
328}
329
330static int lp8755_int_config(struct lp8755_chip *pchip)
331{
332 int ret;
333 unsigned int regval;
334
335 if (pchip->irq == 0) {
336 dev_warn(pchip->dev, "not use interrupt : %s\n", __func__);
337 return 0;
338 }
339
340 ret = regmap_read(pchip->regmap, 0x0F, ®val);
341 if (ret < 0) {
342 dev_err(pchip->dev, "i2c access error %s\n", __func__);
343 return ret;
344 }
345
346 pchip->irqmask = regval;
347 return devm_request_threaded_irq(pchip->dev, pchip->irq, NULL,
348 lp8755_irq_handler,
349 IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
350 "lp8755-irq", pchip);
351}
352
353static const struct regmap_config lp8755_regmap = {
354 .reg_bits = 8,
355 .val_bits = 8,
356 .max_register = LP8755_REG_MAX,
357};
358
359static int lp8755_probe(struct i2c_client *client)
360{
361 int ret, icnt;
362 struct lp8755_chip *pchip;
363 struct lp8755_platform_data *pdata = dev_get_platdata(&client->dev);
364
365 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
366 dev_err(&client->dev, "i2c functionality check fail.\n");
367 return -EOPNOTSUPP;
368 }
369
370 pchip = devm_kzalloc(&client->dev,
371 sizeof(struct lp8755_chip), GFP_KERNEL);
372 if (!pchip)
373 return -ENOMEM;
374
375 pchip->dev = &client->dev;
376 pchip->regmap = devm_regmap_init_i2c(client, &lp8755_regmap);
377 if (IS_ERR(pchip->regmap)) {
378 ret = PTR_ERR(pchip->regmap);
379 dev_err(&client->dev, "fail to allocate regmap %d\n", ret);
380 return ret;
381 }
382 i2c_set_clientdata(client, pchip);
383
384 if (pdata != NULL) {
385 pchip->pdata = pdata;
386 pchip->mphase = pdata->mphase;
387 } else {
388 pchip->pdata = devm_kzalloc(pchip->dev,
389 sizeof(struct lp8755_platform_data),
390 GFP_KERNEL);
391 if (!pchip->pdata)
392 return -ENOMEM;
393 ret = lp8755_init_data(pchip);
394 if (ret < 0) {
395 dev_err(&client->dev, "fail to initialize chip\n");
396 return ret;
397 }
398 }
399
400 ret = lp8755_regulator_init(pchip);
401 if (ret < 0) {
402 dev_err(&client->dev, "fail to initialize regulators\n");
403 goto err;
404 }
405
406 pchip->irq = client->irq;
407 ret = lp8755_int_config(pchip);
408 if (ret < 0) {
409 dev_err(&client->dev, "fail to irq config\n");
410 goto err;
411 }
412
413 return ret;
414
415err:
416 /* output disable */
417 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
418 regmap_write(pchip->regmap, icnt, 0x00);
419
420 return ret;
421}
422
423static void lp8755_remove(struct i2c_client *client)
424{
425 int icnt;
426 struct lp8755_chip *pchip = i2c_get_clientdata(client);
427
428 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
429 regmap_write(pchip->regmap, icnt, 0x00);
430}
431
432static const struct i2c_device_id lp8755_id[] = {
433 { LP8755_NAME },
434 {}
435};
436
437MODULE_DEVICE_TABLE(i2c, lp8755_id);
438
439static struct i2c_driver lp8755_i2c_driver = {
440 .driver = {
441 .name = LP8755_NAME,
442 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
443 },
444 .probe = lp8755_probe,
445 .remove = lp8755_remove,
446 .id_table = lp8755_id,
447};
448
449static int __init lp8755_init(void)
450{
451 return i2c_add_driver(&lp8755_i2c_driver);
452}
453
454subsys_initcall(lp8755_init);
455
456static void __exit lp8755_exit(void)
457{
458 i2c_del_driver(&lp8755_i2c_driver);
459}
460
461module_exit(lp8755_exit);
462
463MODULE_DESCRIPTION("Texas Instruments lp8755 driver");
464MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
465MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * LP8755 High Performance Power Management Unit : System Interface Driver
4 * (based on rev. 0.26)
5 * Copyright 2012 Texas Instruments
6 *
7 * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com>
8 */
9
10#include <linux/module.h>
11#include <linux/slab.h>
12#include <linux/i2c.h>
13#include <linux/err.h>
14#include <linux/irq.h>
15#include <linux/interrupt.h>
16#include <linux/gpio.h>
17#include <linux/regmap.h>
18#include <linux/uaccess.h>
19#include <linux/regulator/driver.h>
20#include <linux/regulator/machine.h>
21#include <linux/platform_data/lp8755.h>
22
23#define LP8755_REG_BUCK0 0x00
24#define LP8755_REG_BUCK1 0x03
25#define LP8755_REG_BUCK2 0x04
26#define LP8755_REG_BUCK3 0x01
27#define LP8755_REG_BUCK4 0x05
28#define LP8755_REG_BUCK5 0x02
29#define LP8755_REG_MAX 0xFF
30
31#define LP8755_BUCK_EN_M BIT(7)
32#define LP8755_BUCK_LINEAR_OUT_MAX 0x76
33#define LP8755_BUCK_VOUT_M 0x7F
34
35struct lp8755_mphase {
36 int nreg;
37 int buck_num[LP8755_BUCK_MAX];
38};
39
40struct lp8755_chip {
41 struct device *dev;
42 struct regmap *regmap;
43 struct lp8755_platform_data *pdata;
44
45 int irq;
46 unsigned int irqmask;
47
48 int mphase;
49 struct regulator_dev *rdev[LP8755_BUCK_MAX];
50};
51
52static int lp8755_buck_enable_time(struct regulator_dev *rdev)
53{
54 int ret;
55 unsigned int regval;
56 enum lp8755_bucks id = rdev_get_id(rdev);
57
58 ret = regmap_read(rdev->regmap, 0x12 + id, ®val);
59 if (ret < 0) {
60 dev_err(&rdev->dev, "i2c access error %s\n", __func__);
61 return ret;
62 }
63 return (regval & 0xff) * 100;
64}
65
66static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
67{
68 int ret;
69 unsigned int regbval = 0x0;
70 enum lp8755_bucks id = rdev_get_id(rdev);
71 struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
72
73 switch (mode) {
74 case REGULATOR_MODE_FAST:
75 /* forced pwm mode */
76 regbval = (0x01 << id);
77 break;
78 case REGULATOR_MODE_NORMAL:
79 /* enable automatic pwm/pfm mode */
80 ret = regmap_update_bits(rdev->regmap, 0x08 + id, 0x20, 0x00);
81 if (ret < 0)
82 goto err_i2c;
83 break;
84 case REGULATOR_MODE_IDLE:
85 /* enable automatic pwm/pfm/lppfm mode */
86 ret = regmap_update_bits(rdev->regmap, 0x08 + id, 0x20, 0x20);
87 if (ret < 0)
88 goto err_i2c;
89
90 ret = regmap_update_bits(rdev->regmap, 0x10, 0x01, 0x01);
91 if (ret < 0)
92 goto err_i2c;
93 break;
94 default:
95 dev_err(pchip->dev, "Not supported buck mode %s\n", __func__);
96 /* forced pwm mode */
97 regbval = (0x01 << id);
98 }
99
100 ret = regmap_update_bits(rdev->regmap, 0x06, 0x01 << id, regbval);
101 if (ret < 0)
102 goto err_i2c;
103 return ret;
104err_i2c:
105 dev_err(&rdev->dev, "i2c access error %s\n", __func__);
106 return ret;
107}
108
109static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev)
110{
111 int ret;
112 unsigned int regval;
113 enum lp8755_bucks id = rdev_get_id(rdev);
114
115 ret = regmap_read(rdev->regmap, 0x06, ®val);
116 if (ret < 0)
117 goto err_i2c;
118
119 /* mode fast means forced pwm mode */
120 if (regval & (0x01 << id))
121 return REGULATOR_MODE_FAST;
122
123 ret = regmap_read(rdev->regmap, 0x08 + id, ®val);
124 if (ret < 0)
125 goto err_i2c;
126
127 /* mode idle means automatic pwm/pfm/lppfm mode */
128 if (regval & 0x20)
129 return REGULATOR_MODE_IDLE;
130
131 /* mode normal means automatic pwm/pfm mode */
132 return REGULATOR_MODE_NORMAL;
133
134err_i2c:
135 dev_err(&rdev->dev, "i2c access error %s\n", __func__);
136 return 0;
137}
138
139static const unsigned int lp8755_buck_ramp_table[] = {
140 30000, 15000, 7500, 3800, 1900, 940, 470, 230
141};
142
143static const struct regulator_ops lp8755_buck_ops = {
144 .map_voltage = regulator_map_voltage_linear,
145 .list_voltage = regulator_list_voltage_linear,
146 .set_voltage_sel = regulator_set_voltage_sel_regmap,
147 .get_voltage_sel = regulator_get_voltage_sel_regmap,
148 .enable = regulator_enable_regmap,
149 .disable = regulator_disable_regmap,
150 .is_enabled = regulator_is_enabled_regmap,
151 .enable_time = lp8755_buck_enable_time,
152 .set_mode = lp8755_buck_set_mode,
153 .get_mode = lp8755_buck_get_mode,
154 .set_ramp_delay = regulator_set_ramp_delay_regmap,
155};
156
157#define lp8755_rail(_id) "lp8755_buck"#_id
158#define lp8755_buck_init(_id)\
159{\
160 .constraints = {\
161 .name = lp8755_rail(_id),\
162 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,\
163 .min_uV = 500000,\
164 .max_uV = 1675000,\
165 },\
166}
167
168static struct regulator_init_data lp8755_reg_default[LP8755_BUCK_MAX] = {
169 [LP8755_BUCK0] = lp8755_buck_init(0),
170 [LP8755_BUCK1] = lp8755_buck_init(1),
171 [LP8755_BUCK2] = lp8755_buck_init(2),
172 [LP8755_BUCK3] = lp8755_buck_init(3),
173 [LP8755_BUCK4] = lp8755_buck_init(4),
174 [LP8755_BUCK5] = lp8755_buck_init(5),
175};
176
177static const struct lp8755_mphase mphase_buck[MPHASE_CONF_MAX] = {
178 { 3, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK5 } },
179 { 6, { LP8755_BUCK0, LP8755_BUCK1, LP8755_BUCK2, LP8755_BUCK3,
180 LP8755_BUCK4, LP8755_BUCK5 } },
181 { 5, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK4,
182 LP8755_BUCK5} },
183 { 4, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK4, LP8755_BUCK5} },
184 { 3, { LP8755_BUCK0, LP8755_BUCK4, LP8755_BUCK5} },
185 { 2, { LP8755_BUCK0, LP8755_BUCK5} },
186 { 1, { LP8755_BUCK0} },
187 { 2, { LP8755_BUCK0, LP8755_BUCK3} },
188 { 4, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK5} },
189};
190
191static int lp8755_init_data(struct lp8755_chip *pchip)
192{
193 unsigned int regval;
194 int ret, icnt, buck_num;
195 struct lp8755_platform_data *pdata = pchip->pdata;
196
197 /* read back muti-phase configuration */
198 ret = regmap_read(pchip->regmap, 0x3D, ®val);
199 if (ret < 0)
200 goto out_i2c_error;
201 pchip->mphase = regval & 0x0F;
202
203 /* set default data based on multi-phase config */
204 for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
205 buck_num = mphase_buck[pchip->mphase].buck_num[icnt];
206 pdata->buck_data[buck_num] = &lp8755_reg_default[buck_num];
207 }
208 return ret;
209
210out_i2c_error:
211 dev_err(pchip->dev, "i2c access error %s\n", __func__);
212 return ret;
213}
214
215#define lp8755_buck_desc(_id)\
216{\
217 .name = lp8755_rail(_id),\
218 .id = LP8755_BUCK##_id,\
219 .ops = &lp8755_buck_ops,\
220 .n_voltages = LP8755_BUCK_LINEAR_OUT_MAX+1,\
221 .uV_step = 10000,\
222 .min_uV = 500000,\
223 .type = REGULATOR_VOLTAGE,\
224 .owner = THIS_MODULE,\
225 .enable_reg = LP8755_REG_BUCK##_id,\
226 .enable_mask = LP8755_BUCK_EN_M,\
227 .vsel_reg = LP8755_REG_BUCK##_id,\
228 .vsel_mask = LP8755_BUCK_VOUT_M,\
229 .ramp_reg = (LP8755_BUCK##_id) + 0x7,\
230 .ramp_mask = 0x7,\
231 .ramp_delay_table = lp8755_buck_ramp_table,\
232 .n_ramp_values = ARRAY_SIZE(lp8755_buck_ramp_table),\
233}
234
235static const struct regulator_desc lp8755_regulators[] = {
236 lp8755_buck_desc(0),
237 lp8755_buck_desc(1),
238 lp8755_buck_desc(2),
239 lp8755_buck_desc(3),
240 lp8755_buck_desc(4),
241 lp8755_buck_desc(5),
242};
243
244static int lp8755_regulator_init(struct lp8755_chip *pchip)
245{
246 int ret, icnt, buck_num;
247 struct lp8755_platform_data *pdata = pchip->pdata;
248 struct regulator_config rconfig = { };
249
250 rconfig.regmap = pchip->regmap;
251 rconfig.dev = pchip->dev;
252 rconfig.driver_data = pchip;
253
254 for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
255 buck_num = mphase_buck[pchip->mphase].buck_num[icnt];
256 rconfig.init_data = pdata->buck_data[buck_num];
257 rconfig.of_node = pchip->dev->of_node;
258 pchip->rdev[buck_num] =
259 devm_regulator_register(pchip->dev,
260 &lp8755_regulators[buck_num], &rconfig);
261 if (IS_ERR(pchip->rdev[buck_num])) {
262 ret = PTR_ERR(pchip->rdev[buck_num]);
263 pchip->rdev[buck_num] = NULL;
264 dev_err(pchip->dev, "regulator init failed: buck %d\n",
265 buck_num);
266 return ret;
267 }
268 }
269
270 return 0;
271}
272
273static irqreturn_t lp8755_irq_handler(int irq, void *data)
274{
275 int ret, icnt;
276 unsigned int flag0, flag1;
277 struct lp8755_chip *pchip = data;
278
279 /* read flag0 register */
280 ret = regmap_read(pchip->regmap, 0x0D, &flag0);
281 if (ret < 0)
282 goto err_i2c;
283 /* clear flag register to pull up int. pin */
284 ret = regmap_write(pchip->regmap, 0x0D, 0x00);
285 if (ret < 0)
286 goto err_i2c;
287
288 /* sent power fault detection event to specific regulator */
289 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
290 if ((flag0 & (0x4 << icnt))
291 && (pchip->irqmask & (0x04 << icnt))
292 && (pchip->rdev[icnt] != NULL)) {
293 regulator_notifier_call_chain(pchip->rdev[icnt],
294 LP8755_EVENT_PWR_FAULT,
295 NULL);
296 }
297
298 /* read flag1 register */
299 ret = regmap_read(pchip->regmap, 0x0E, &flag1);
300 if (ret < 0)
301 goto err_i2c;
302 /* clear flag register to pull up int. pin */
303 ret = regmap_write(pchip->regmap, 0x0E, 0x00);
304 if (ret < 0)
305 goto err_i2c;
306
307 /* send OCP event to all regulator devices */
308 if ((flag1 & 0x01) && (pchip->irqmask & 0x01))
309 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
310 if (pchip->rdev[icnt] != NULL) {
311 regulator_notifier_call_chain(pchip->rdev[icnt],
312 LP8755_EVENT_OCP,
313 NULL);
314 }
315
316 /* send OVP event to all regulator devices */
317 if ((flag1 & 0x02) && (pchip->irqmask & 0x02))
318 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
319 if (pchip->rdev[icnt] != NULL) {
320 regulator_notifier_call_chain(pchip->rdev[icnt],
321 LP8755_EVENT_OVP,
322 NULL);
323 }
324 return IRQ_HANDLED;
325
326err_i2c:
327 dev_err(pchip->dev, "i2c access error %s\n", __func__);
328 return IRQ_NONE;
329}
330
331static int lp8755_int_config(struct lp8755_chip *pchip)
332{
333 int ret;
334 unsigned int regval;
335
336 if (pchip->irq == 0) {
337 dev_warn(pchip->dev, "not use interrupt : %s\n", __func__);
338 return 0;
339 }
340
341 ret = regmap_read(pchip->regmap, 0x0F, ®val);
342 if (ret < 0) {
343 dev_err(pchip->dev, "i2c access error %s\n", __func__);
344 return ret;
345 }
346
347 pchip->irqmask = regval;
348 return devm_request_threaded_irq(pchip->dev, pchip->irq, NULL,
349 lp8755_irq_handler,
350 IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
351 "lp8755-irq", pchip);
352}
353
354static const struct regmap_config lp8755_regmap = {
355 .reg_bits = 8,
356 .val_bits = 8,
357 .max_register = LP8755_REG_MAX,
358};
359
360static int lp8755_probe(struct i2c_client *client)
361{
362 int ret, icnt;
363 struct lp8755_chip *pchip;
364 struct lp8755_platform_data *pdata = dev_get_platdata(&client->dev);
365
366 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
367 dev_err(&client->dev, "i2c functionality check fail.\n");
368 return -EOPNOTSUPP;
369 }
370
371 pchip = devm_kzalloc(&client->dev,
372 sizeof(struct lp8755_chip), GFP_KERNEL);
373 if (!pchip)
374 return -ENOMEM;
375
376 pchip->dev = &client->dev;
377 pchip->regmap = devm_regmap_init_i2c(client, &lp8755_regmap);
378 if (IS_ERR(pchip->regmap)) {
379 ret = PTR_ERR(pchip->regmap);
380 dev_err(&client->dev, "fail to allocate regmap %d\n", ret);
381 return ret;
382 }
383 i2c_set_clientdata(client, pchip);
384
385 if (pdata != NULL) {
386 pchip->pdata = pdata;
387 pchip->mphase = pdata->mphase;
388 } else {
389 pchip->pdata = devm_kzalloc(pchip->dev,
390 sizeof(struct lp8755_platform_data),
391 GFP_KERNEL);
392 if (!pchip->pdata)
393 return -ENOMEM;
394 ret = lp8755_init_data(pchip);
395 if (ret < 0) {
396 dev_err(&client->dev, "fail to initialize chip\n");
397 return ret;
398 }
399 }
400
401 ret = lp8755_regulator_init(pchip);
402 if (ret < 0) {
403 dev_err(&client->dev, "fail to initialize regulators\n");
404 goto err;
405 }
406
407 pchip->irq = client->irq;
408 ret = lp8755_int_config(pchip);
409 if (ret < 0) {
410 dev_err(&client->dev, "fail to irq config\n");
411 goto err;
412 }
413
414 return ret;
415
416err:
417 /* output disable */
418 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
419 regmap_write(pchip->regmap, icnt, 0x00);
420
421 return ret;
422}
423
424static void lp8755_remove(struct i2c_client *client)
425{
426 int icnt;
427 struct lp8755_chip *pchip = i2c_get_clientdata(client);
428
429 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
430 regmap_write(pchip->regmap, icnt, 0x00);
431}
432
433static const struct i2c_device_id lp8755_id[] = {
434 {LP8755_NAME, 0},
435 {}
436};
437
438MODULE_DEVICE_TABLE(i2c, lp8755_id);
439
440static struct i2c_driver lp8755_i2c_driver = {
441 .driver = {
442 .name = LP8755_NAME,
443 },
444 .probe_new = lp8755_probe,
445 .remove = lp8755_remove,
446 .id_table = lp8755_id,
447};
448
449static int __init lp8755_init(void)
450{
451 return i2c_add_driver(&lp8755_i2c_driver);
452}
453
454subsys_initcall(lp8755_init);
455
456static void __exit lp8755_exit(void)
457{
458 i2c_del_driver(&lp8755_i2c_driver);
459}
460
461module_exit(lp8755_exit);
462
463MODULE_DESCRIPTION("Texas Instruments lp8755 driver");
464MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
465MODULE_LICENSE("GPL v2");