Loading...
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * atusb.h - Definitions shared between kernel and ATUSB firmware
4 *
5 * Written 2013 by Werner Almesberger <werner@almesberger.net>
6 *
7 * (at your option) any later version.
8 *
9 * This file should be identical for kernel and firmware.
10 * Kernel: drivers/net/ieee802154/atusb.h
11 * Firmware: ben-wpan/atusb/fw/include/atusb/atusb.h
12 */
13
14#ifndef _ATUSB_H
15#define _ATUSB_H
16
17#define ATUSB_VENDOR_ID 0x20b7 /* Qi Hardware*/
18#define ATUSB_PRODUCT_ID 0x1540 /* 802.15.4, device 0 */
19 /* -- - - */
20
21#define ATUSB_BUILD_SIZE 256 /* maximum build version/date message length */
22
23/* Commands to our device. Make sure this is synced with the firmware */
24enum atusb_requests {
25 ATUSB_ID = 0x00, /* system status/control grp */
26 ATUSB_BUILD,
27 ATUSB_RESET,
28 ATUSB_RF_RESET = 0x10, /* debug/test group */
29 ATUSB_POLL_INT,
30 ATUSB_TEST, /* atusb-sil only */
31 ATUSB_TIMER,
32 ATUSB_GPIO,
33 ATUSB_SLP_TR,
34 ATUSB_GPIO_CLEANUP,
35 ATUSB_REG_WRITE = 0x20, /* transceiver group */
36 ATUSB_REG_READ,
37 ATUSB_BUF_WRITE,
38 ATUSB_BUF_READ,
39 ATUSB_SRAM_WRITE,
40 ATUSB_SRAM_READ,
41 ATUSB_SPI_WRITE = 0x30, /* SPI group */
42 ATUSB_SPI_READ1,
43 ATUSB_SPI_READ2,
44 ATUSB_SPI_WRITE2_SYNC,
45 ATUSB_RX_MODE = 0x40, /* HardMAC group */
46 ATUSB_TX,
47 ATUSB_EUI64_WRITE = 0x50, /* Parameter in EEPROM grp */
48 ATUSB_EUI64_READ,
49};
50
51enum {
52 ATUSB_HW_TYPE_100813, /* 2010-08-13 */
53 ATUSB_HW_TYPE_101216, /* 2010-12-16 */
54 ATUSB_HW_TYPE_110131, /* 2011-01-31, ATmega32U2-based */
55 ATUSB_HW_TYPE_RZUSB, /* Atmel Raven USB dongle with at86rf230 */
56 ATUSB_HW_TYPE_HULUSB, /* Busware HUL USB dongle with at86rf212 */
57};
58
59/*
60 * Direction bRequest wValue wIndex wLength
61 *
62 * ->host ATUSB_ID - - 3
63 * ->host ATUSB_BUILD - - #bytes
64 * host-> ATUSB_RESET - - 0
65 *
66 * host-> ATUSB_RF_RESET - - 0
67 * ->host ATUSB_POLL_INT - - 1
68 * host-> ATUSB_TEST - - 0
69 * ->host ATUSB_TIMER - - #bytes (6)
70 * ->host ATUSB_GPIO dir+data mask+p# 3
71 * host-> ATUSB_SLP_TR - - 0
72 * host-> ATUSB_GPIO_CLEANUP - - 0
73 *
74 * host-> ATUSB_REG_WRITE value addr 0
75 * ->host ATUSB_REG_READ - addr 1
76 * host-> ATUSB_BUF_WRITE - - #bytes
77 * ->host ATUSB_BUF_READ - - #bytes
78 * host-> ATUSB_SRAM_WRITE - addr #bytes
79 * ->host ATUSB_SRAM_READ - addr #bytes
80 *
81 * host-> ATUSB_SPI_WRITE byte0 byte1 #bytes
82 * ->host ATUSB_SPI_READ1 byte0 - #bytes
83 * ->host ATUSB_SPI_READ2 byte0 byte1 #bytes
84 * ->host ATUSB_SPI_WRITE2_SYNC byte0 byte1 0/1
85 *
86 * host-> ATUSB_RX_MODE on - 0
87 * host-> ATUSB_TX flags ack_seq #bytes
88 * host-> ATUSB_EUI64_WRITE - - #bytes (8)
89 * ->host ATUSB_EUI64_READ - - #bytes (8)
90 */
91
92#define ATUSB_REQ_FROM_DEV (USB_TYPE_VENDOR | USB_DIR_IN)
93#define ATUSB_REQ_TO_DEV (USB_TYPE_VENDOR | USB_DIR_OUT)
94
95#endif /* !_ATUSB_H */
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * atusb.h - Definitions shared between kernel and ATUSB firmware
4 *
5 * Written 2013 by Werner Almesberger <werner@almesberger.net>
6 *
7 * (at your option) any later version.
8 *
9 * This file should be identical for kernel and firmware.
10 * Kernel: drivers/net/ieee802154/atusb.h
11 * Firmware: ben-wpan/atusb/fw/include/atusb/atusb.h
12 */
13
14#ifndef _ATUSB_H
15#define _ATUSB_H
16
17#define ATUSB_VENDOR_ID 0x20b7 /* Qi Hardware*/
18#define ATUSB_PRODUCT_ID 0x1540 /* 802.15.4, device 0 */
19 /* -- - - */
20
21#define ATUSB_BUILD_SIZE 256 /* maximum build version/date message length */
22
23/* Commands to our device. Make sure this is synced with the firmware */
24enum atusb_requests {
25 ATUSB_ID = 0x00, /* system status/control grp */
26 ATUSB_BUILD,
27 ATUSB_RESET,
28 ATUSB_RF_RESET = 0x10, /* debug/test group */
29 ATUSB_POLL_INT,
30 ATUSB_TEST, /* atusb-sil only */
31 ATUSB_TIMER,
32 ATUSB_GPIO,
33 ATUSB_SLP_TR,
34 ATUSB_GPIO_CLEANUP,
35 ATUSB_REG_WRITE = 0x20, /* transceiver group */
36 ATUSB_REG_READ,
37 ATUSB_BUF_WRITE,
38 ATUSB_BUF_READ,
39 ATUSB_SRAM_WRITE,
40 ATUSB_SRAM_READ,
41 ATUSB_SPI_WRITE = 0x30, /* SPI group */
42 ATUSB_SPI_READ1,
43 ATUSB_SPI_READ2,
44 ATUSB_SPI_WRITE2_SYNC,
45 ATUSB_RX_MODE = 0x40, /* HardMAC group */
46 ATUSB_TX,
47 ATUSB_EUI64_WRITE = 0x50, /* Parameter in EEPROM grp */
48 ATUSB_EUI64_READ,
49};
50
51enum {
52 ATUSB_HW_TYPE_100813, /* 2010-08-13 */
53 ATUSB_HW_TYPE_101216, /* 2010-12-16 */
54 ATUSB_HW_TYPE_110131, /* 2011-01-31, ATmega32U2-based */
55 ATUSB_HW_TYPE_RZUSB, /* Atmel Raven USB dongle with at86rf230 */
56 ATUSB_HW_TYPE_HULUSB, /* Busware HUL USB dongle with at86rf212 */
57};
58
59/*
60 * Direction bRequest wValue wIndex wLength
61 *
62 * ->host ATUSB_ID - - 3
63 * ->host ATUSB_BUILD - - #bytes
64 * host-> ATUSB_RESET - - 0
65 *
66 * host-> ATUSB_RF_RESET - - 0
67 * ->host ATUSB_POLL_INT - - 1
68 * host-> ATUSB_TEST - - 0
69 * ->host ATUSB_TIMER - - #bytes (6)
70 * ->host ATUSB_GPIO dir+data mask+p# 3
71 * host-> ATUSB_SLP_TR - - 0
72 * host-> ATUSB_GPIO_CLEANUP - - 0
73 *
74 * host-> ATUSB_REG_WRITE value addr 0
75 * ->host ATUSB_REG_READ - addr 1
76 * host-> ATUSB_BUF_WRITE - - #bytes
77 * ->host ATUSB_BUF_READ - - #bytes
78 * host-> ATUSB_SRAM_WRITE - addr #bytes
79 * ->host ATUSB_SRAM_READ - addr #bytes
80 *
81 * host-> ATUSB_SPI_WRITE byte0 byte1 #bytes
82 * ->host ATUSB_SPI_READ1 byte0 - #bytes
83 * ->host ATUSB_SPI_READ2 byte0 byte1 #bytes
84 * ->host ATUSB_SPI_WRITE2_SYNC byte0 byte1 0/1
85 *
86 * host-> ATUSB_RX_MODE on - 0
87 * host-> ATUSB_TX flags ack_seq #bytes
88 * host-> ATUSB_EUI64_WRITE - - #bytes (8)
89 * ->host ATUSB_EUI64_READ - - #bytes (8)
90 */
91
92#define ATUSB_REQ_FROM_DEV (USB_TYPE_VENDOR | USB_DIR_IN)
93#define ATUSB_REQ_TO_DEV (USB_TYPE_VENDOR | USB_DIR_OUT)
94
95#endif /* !_ATUSB_H */