Loading...
1/*
2 * B53 switch driver main logic
3 *
4 * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
5 * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
6 *
7 * Permission to use, copy, modify, and/or distribute this software for any
8 * purpose with or without fee is hereby granted, provided that the above
9 * copyright notice and this permission notice appear in all copies.
10 *
11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18 */
19
20#include <linux/delay.h>
21#include <linux/export.h>
22#include <linux/gpio.h>
23#include <linux/kernel.h>
24#include <linux/module.h>
25#include <linux/platform_data/b53.h>
26#include <linux/phy.h>
27#include <linux/phylink.h>
28#include <linux/etherdevice.h>
29#include <linux/if_bridge.h>
30#include <linux/if_vlan.h>
31#include <net/dsa.h>
32
33#include "b53_regs.h"
34#include "b53_priv.h"
35
36struct b53_mib_desc {
37 u8 size;
38 u8 offset;
39 const char *name;
40};
41
42/* BCM5365 MIB counters */
43static const struct b53_mib_desc b53_mibs_65[] = {
44 { 8, 0x00, "TxOctets" },
45 { 4, 0x08, "TxDropPkts" },
46 { 4, 0x10, "TxBroadcastPkts" },
47 { 4, 0x14, "TxMulticastPkts" },
48 { 4, 0x18, "TxUnicastPkts" },
49 { 4, 0x1c, "TxCollisions" },
50 { 4, 0x20, "TxSingleCollision" },
51 { 4, 0x24, "TxMultipleCollision" },
52 { 4, 0x28, "TxDeferredTransmit" },
53 { 4, 0x2c, "TxLateCollision" },
54 { 4, 0x30, "TxExcessiveCollision" },
55 { 4, 0x38, "TxPausePkts" },
56 { 8, 0x44, "RxOctets" },
57 { 4, 0x4c, "RxUndersizePkts" },
58 { 4, 0x50, "RxPausePkts" },
59 { 4, 0x54, "Pkts64Octets" },
60 { 4, 0x58, "Pkts65to127Octets" },
61 { 4, 0x5c, "Pkts128to255Octets" },
62 { 4, 0x60, "Pkts256to511Octets" },
63 { 4, 0x64, "Pkts512to1023Octets" },
64 { 4, 0x68, "Pkts1024to1522Octets" },
65 { 4, 0x6c, "RxOversizePkts" },
66 { 4, 0x70, "RxJabbers" },
67 { 4, 0x74, "RxAlignmentErrors" },
68 { 4, 0x78, "RxFCSErrors" },
69 { 8, 0x7c, "RxGoodOctets" },
70 { 4, 0x84, "RxDropPkts" },
71 { 4, 0x88, "RxUnicastPkts" },
72 { 4, 0x8c, "RxMulticastPkts" },
73 { 4, 0x90, "RxBroadcastPkts" },
74 { 4, 0x94, "RxSAChanges" },
75 { 4, 0x98, "RxFragments" },
76};
77
78#define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65)
79
80/* BCM63xx MIB counters */
81static const struct b53_mib_desc b53_mibs_63xx[] = {
82 { 8, 0x00, "TxOctets" },
83 { 4, 0x08, "TxDropPkts" },
84 { 4, 0x0c, "TxQoSPkts" },
85 { 4, 0x10, "TxBroadcastPkts" },
86 { 4, 0x14, "TxMulticastPkts" },
87 { 4, 0x18, "TxUnicastPkts" },
88 { 4, 0x1c, "TxCollisions" },
89 { 4, 0x20, "TxSingleCollision" },
90 { 4, 0x24, "TxMultipleCollision" },
91 { 4, 0x28, "TxDeferredTransmit" },
92 { 4, 0x2c, "TxLateCollision" },
93 { 4, 0x30, "TxExcessiveCollision" },
94 { 4, 0x38, "TxPausePkts" },
95 { 8, 0x3c, "TxQoSOctets" },
96 { 8, 0x44, "RxOctets" },
97 { 4, 0x4c, "RxUndersizePkts" },
98 { 4, 0x50, "RxPausePkts" },
99 { 4, 0x54, "Pkts64Octets" },
100 { 4, 0x58, "Pkts65to127Octets" },
101 { 4, 0x5c, "Pkts128to255Octets" },
102 { 4, 0x60, "Pkts256to511Octets" },
103 { 4, 0x64, "Pkts512to1023Octets" },
104 { 4, 0x68, "Pkts1024to1522Octets" },
105 { 4, 0x6c, "RxOversizePkts" },
106 { 4, 0x70, "RxJabbers" },
107 { 4, 0x74, "RxAlignmentErrors" },
108 { 4, 0x78, "RxFCSErrors" },
109 { 8, 0x7c, "RxGoodOctets" },
110 { 4, 0x84, "RxDropPkts" },
111 { 4, 0x88, "RxUnicastPkts" },
112 { 4, 0x8c, "RxMulticastPkts" },
113 { 4, 0x90, "RxBroadcastPkts" },
114 { 4, 0x94, "RxSAChanges" },
115 { 4, 0x98, "RxFragments" },
116 { 4, 0xa0, "RxSymbolErrors" },
117 { 4, 0xa4, "RxQoSPkts" },
118 { 8, 0xa8, "RxQoSOctets" },
119 { 4, 0xb0, "Pkts1523to2047Octets" },
120 { 4, 0xb4, "Pkts2048to4095Octets" },
121 { 4, 0xb8, "Pkts4096to8191Octets" },
122 { 4, 0xbc, "Pkts8192to9728Octets" },
123 { 4, 0xc0, "RxDiscarded" },
124};
125
126#define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx)
127
128/* MIB counters */
129static const struct b53_mib_desc b53_mibs[] = {
130 { 8, 0x00, "TxOctets" },
131 { 4, 0x08, "TxDropPkts" },
132 { 4, 0x10, "TxBroadcastPkts" },
133 { 4, 0x14, "TxMulticastPkts" },
134 { 4, 0x18, "TxUnicastPkts" },
135 { 4, 0x1c, "TxCollisions" },
136 { 4, 0x20, "TxSingleCollision" },
137 { 4, 0x24, "TxMultipleCollision" },
138 { 4, 0x28, "TxDeferredTransmit" },
139 { 4, 0x2c, "TxLateCollision" },
140 { 4, 0x30, "TxExcessiveCollision" },
141 { 4, 0x38, "TxPausePkts" },
142 { 8, 0x50, "RxOctets" },
143 { 4, 0x58, "RxUndersizePkts" },
144 { 4, 0x5c, "RxPausePkts" },
145 { 4, 0x60, "Pkts64Octets" },
146 { 4, 0x64, "Pkts65to127Octets" },
147 { 4, 0x68, "Pkts128to255Octets" },
148 { 4, 0x6c, "Pkts256to511Octets" },
149 { 4, 0x70, "Pkts512to1023Octets" },
150 { 4, 0x74, "Pkts1024to1522Octets" },
151 { 4, 0x78, "RxOversizePkts" },
152 { 4, 0x7c, "RxJabbers" },
153 { 4, 0x80, "RxAlignmentErrors" },
154 { 4, 0x84, "RxFCSErrors" },
155 { 8, 0x88, "RxGoodOctets" },
156 { 4, 0x90, "RxDropPkts" },
157 { 4, 0x94, "RxUnicastPkts" },
158 { 4, 0x98, "RxMulticastPkts" },
159 { 4, 0x9c, "RxBroadcastPkts" },
160 { 4, 0xa0, "RxSAChanges" },
161 { 4, 0xa4, "RxFragments" },
162 { 4, 0xa8, "RxJumboPkts" },
163 { 4, 0xac, "RxSymbolErrors" },
164 { 4, 0xc0, "RxDiscarded" },
165};
166
167#define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs)
168
169static const struct b53_mib_desc b53_mibs_58xx[] = {
170 { 8, 0x00, "TxOctets" },
171 { 4, 0x08, "TxDropPkts" },
172 { 4, 0x0c, "TxQPKTQ0" },
173 { 4, 0x10, "TxBroadcastPkts" },
174 { 4, 0x14, "TxMulticastPkts" },
175 { 4, 0x18, "TxUnicastPKts" },
176 { 4, 0x1c, "TxCollisions" },
177 { 4, 0x20, "TxSingleCollision" },
178 { 4, 0x24, "TxMultipleCollision" },
179 { 4, 0x28, "TxDeferredCollision" },
180 { 4, 0x2c, "TxLateCollision" },
181 { 4, 0x30, "TxExcessiveCollision" },
182 { 4, 0x34, "TxFrameInDisc" },
183 { 4, 0x38, "TxPausePkts" },
184 { 4, 0x3c, "TxQPKTQ1" },
185 { 4, 0x40, "TxQPKTQ2" },
186 { 4, 0x44, "TxQPKTQ3" },
187 { 4, 0x48, "TxQPKTQ4" },
188 { 4, 0x4c, "TxQPKTQ5" },
189 { 8, 0x50, "RxOctets" },
190 { 4, 0x58, "RxUndersizePkts" },
191 { 4, 0x5c, "RxPausePkts" },
192 { 4, 0x60, "RxPkts64Octets" },
193 { 4, 0x64, "RxPkts65to127Octets" },
194 { 4, 0x68, "RxPkts128to255Octets" },
195 { 4, 0x6c, "RxPkts256to511Octets" },
196 { 4, 0x70, "RxPkts512to1023Octets" },
197 { 4, 0x74, "RxPkts1024toMaxPktsOctets" },
198 { 4, 0x78, "RxOversizePkts" },
199 { 4, 0x7c, "RxJabbers" },
200 { 4, 0x80, "RxAlignmentErrors" },
201 { 4, 0x84, "RxFCSErrors" },
202 { 8, 0x88, "RxGoodOctets" },
203 { 4, 0x90, "RxDropPkts" },
204 { 4, 0x94, "RxUnicastPkts" },
205 { 4, 0x98, "RxMulticastPkts" },
206 { 4, 0x9c, "RxBroadcastPkts" },
207 { 4, 0xa0, "RxSAChanges" },
208 { 4, 0xa4, "RxFragments" },
209 { 4, 0xa8, "RxJumboPkt" },
210 { 4, 0xac, "RxSymblErr" },
211 { 4, 0xb0, "InRangeErrCount" },
212 { 4, 0xb4, "OutRangeErrCount" },
213 { 4, 0xb8, "EEELpiEvent" },
214 { 4, 0xbc, "EEELpiDuration" },
215 { 4, 0xc0, "RxDiscard" },
216 { 4, 0xc8, "TxQPKTQ6" },
217 { 4, 0xcc, "TxQPKTQ7" },
218 { 4, 0xd0, "TxPkts64Octets" },
219 { 4, 0xd4, "TxPkts65to127Octets" },
220 { 4, 0xd8, "TxPkts128to255Octets" },
221 { 4, 0xdc, "TxPkts256to511Ocets" },
222 { 4, 0xe0, "TxPkts512to1023Ocets" },
223 { 4, 0xe4, "TxPkts1024toMaxPktOcets" },
224};
225
226#define B53_MIBS_58XX_SIZE ARRAY_SIZE(b53_mibs_58xx)
227
228#define B53_MAX_MTU_25 (1536 - ETH_HLEN - VLAN_HLEN - ETH_FCS_LEN)
229#define B53_MAX_MTU (9720 - ETH_HLEN - VLAN_HLEN - ETH_FCS_LEN)
230
231static int b53_do_vlan_op(struct b53_device *dev, u8 op)
232{
233 unsigned int i;
234
235 b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
236
237 for (i = 0; i < 10; i++) {
238 u8 vta;
239
240 b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
241 if (!(vta & VTA_START_CMD))
242 return 0;
243
244 usleep_range(100, 200);
245 }
246
247 return -EIO;
248}
249
250static void b53_set_vlan_entry(struct b53_device *dev, u16 vid,
251 struct b53_vlan *vlan)
252{
253 if (is5325(dev)) {
254 u32 entry = 0;
255
256 if (vlan->members) {
257 entry = ((vlan->untag & VA_UNTAG_MASK_25) <<
258 VA_UNTAG_S_25) | vlan->members;
259 if (dev->core_rev >= 3)
260 entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
261 else
262 entry |= VA_VALID_25;
263 }
264
265 b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
266 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
267 VTA_RW_STATE_WR | VTA_RW_OP_EN);
268 } else if (is5365(dev)) {
269 u16 entry = 0;
270
271 if (vlan->members)
272 entry = ((vlan->untag & VA_UNTAG_MASK_65) <<
273 VA_UNTAG_S_65) | vlan->members | VA_VALID_65;
274
275 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
276 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
277 VTA_RW_STATE_WR | VTA_RW_OP_EN);
278 } else {
279 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
280 b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
281 (vlan->untag << VTE_UNTAG_S) | vlan->members);
282
283 b53_do_vlan_op(dev, VTA_CMD_WRITE);
284 }
285
286 dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n",
287 vid, vlan->members, vlan->untag);
288}
289
290static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
291 struct b53_vlan *vlan)
292{
293 if (is5325(dev)) {
294 u32 entry = 0;
295
296 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
297 VTA_RW_STATE_RD | VTA_RW_OP_EN);
298 b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry);
299
300 if (dev->core_rev >= 3)
301 vlan->valid = !!(entry & VA_VALID_25_R4);
302 else
303 vlan->valid = !!(entry & VA_VALID_25);
304 vlan->members = entry & VA_MEMBER_MASK;
305 vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25;
306
307 } else if (is5365(dev)) {
308 u16 entry = 0;
309
310 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
311 VTA_RW_STATE_WR | VTA_RW_OP_EN);
312 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry);
313
314 vlan->valid = !!(entry & VA_VALID_65);
315 vlan->members = entry & VA_MEMBER_MASK;
316 vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65;
317 } else {
318 u32 entry = 0;
319
320 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
321 b53_do_vlan_op(dev, VTA_CMD_READ);
322 b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry);
323 vlan->members = entry & VTE_MEMBERS;
324 vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS;
325 vlan->valid = true;
326 }
327}
328
329static void b53_set_forwarding(struct b53_device *dev, int enable)
330{
331 u8 mgmt;
332
333 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
334
335 if (enable)
336 mgmt |= SM_SW_FWD_EN;
337 else
338 mgmt &= ~SM_SW_FWD_EN;
339
340 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
341
342 /* Include IMP port in dumb forwarding mode
343 */
344 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
345 mgmt |= B53_MII_DUMB_FWDG_EN;
346 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
347
348 /* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
349 * frames should be flooded or not.
350 */
351 b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
352 mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
353 b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
354}
355
356static void b53_enable_vlan(struct b53_device *dev, int port, bool enable,
357 bool enable_filtering)
358{
359 u8 mgmt, vc0, vc1, vc4 = 0, vc5;
360
361 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
362 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
363 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
364
365 if (is5325(dev) || is5365(dev)) {
366 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
367 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
368 } else if (is63xx(dev)) {
369 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
370 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
371 } else {
372 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
373 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
374 }
375
376 if (enable) {
377 vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
378 vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
379 vc4 &= ~VC4_ING_VID_CHECK_MASK;
380 if (enable_filtering) {
381 vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
382 vc5 |= VC5_DROP_VTABLE_MISS;
383 } else {
384 vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
385 vc5 &= ~VC5_DROP_VTABLE_MISS;
386 }
387
388 if (is5325(dev))
389 vc0 &= ~VC0_RESERVED_1;
390
391 if (is5325(dev) || is5365(dev))
392 vc1 |= VC1_RX_MCST_TAG_EN;
393
394 } else {
395 vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
396 vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
397 vc4 &= ~VC4_ING_VID_CHECK_MASK;
398 vc5 &= ~VC5_DROP_VTABLE_MISS;
399
400 if (is5325(dev) || is5365(dev))
401 vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
402 else
403 vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
404
405 if (is5325(dev) || is5365(dev))
406 vc1 &= ~VC1_RX_MCST_TAG_EN;
407 }
408
409 if (!is5325(dev) && !is5365(dev))
410 vc5 &= ~VC5_VID_FFF_EN;
411
412 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
413 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
414
415 if (is5325(dev) || is5365(dev)) {
416 /* enable the high 8 bit vid check on 5325 */
417 if (is5325(dev) && enable)
418 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
419 VC3_HIGH_8BIT_EN);
420 else
421 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
422
423 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
424 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
425 } else if (is63xx(dev)) {
426 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
427 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
428 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
429 } else {
430 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
431 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
432 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
433 }
434
435 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
436
437 dev->vlan_enabled = enable;
438
439 dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n",
440 port, enable, enable_filtering);
441}
442
443static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
444{
445 u32 port_mask = 0;
446 u16 max_size = JMS_MIN_SIZE;
447
448 if (is5325(dev) || is5365(dev))
449 return -EINVAL;
450
451 if (enable) {
452 port_mask = dev->enabled_ports;
453 max_size = JMS_MAX_SIZE;
454 if (allow_10_100)
455 port_mask |= JPM_10_100_JUMBO_EN;
456 }
457
458 b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
459 return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
460}
461
462static int b53_flush_arl(struct b53_device *dev, u8 mask)
463{
464 unsigned int i;
465
466 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
467 FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
468
469 for (i = 0; i < 10; i++) {
470 u8 fast_age_ctrl;
471
472 b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
473 &fast_age_ctrl);
474
475 if (!(fast_age_ctrl & FAST_AGE_DONE))
476 goto out;
477
478 msleep(1);
479 }
480
481 return -ETIMEDOUT;
482out:
483 /* Only age dynamic entries (default behavior) */
484 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
485 return 0;
486}
487
488static int b53_fast_age_port(struct b53_device *dev, int port)
489{
490 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
491
492 return b53_flush_arl(dev, FAST_AGE_PORT);
493}
494
495static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
496{
497 b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
498
499 return b53_flush_arl(dev, FAST_AGE_VLAN);
500}
501
502void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
503{
504 struct b53_device *dev = ds->priv;
505 unsigned int i;
506 u16 pvlan;
507
508 /* Enable the IMP port to be in the same VLAN as the other ports
509 * on a per-port basis such that we only have Port i and IMP in
510 * the same VLAN.
511 */
512 b53_for_each_port(dev, i) {
513 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan);
514 pvlan |= BIT(cpu_port);
515 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
516 }
517}
518EXPORT_SYMBOL(b53_imp_vlan_setup);
519
520static void b53_port_set_ucast_flood(struct b53_device *dev, int port,
521 bool unicast)
522{
523 u16 uc;
524
525 b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
526 if (unicast)
527 uc |= BIT(port);
528 else
529 uc &= ~BIT(port);
530 b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
531}
532
533static void b53_port_set_mcast_flood(struct b53_device *dev, int port,
534 bool multicast)
535{
536 u16 mc;
537
538 b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
539 if (multicast)
540 mc |= BIT(port);
541 else
542 mc &= ~BIT(port);
543 b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
544
545 b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
546 if (multicast)
547 mc |= BIT(port);
548 else
549 mc &= ~BIT(port);
550 b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
551}
552
553static void b53_port_set_learning(struct b53_device *dev, int port,
554 bool learning)
555{
556 u16 reg;
557
558 b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, ®);
559 if (learning)
560 reg &= ~BIT(port);
561 else
562 reg |= BIT(port);
563 b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg);
564}
565
566static void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
567{
568 struct b53_device *dev = ds->priv;
569 u16 reg;
570
571 b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, ®);
572 if (enable)
573 reg |= BIT(port);
574 else
575 reg &= ~BIT(port);
576 b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
577}
578
579int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
580{
581 struct b53_device *dev = ds->priv;
582 unsigned int cpu_port;
583 int ret = 0;
584 u16 pvlan;
585
586 if (!dsa_is_user_port(ds, port))
587 return 0;
588
589 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
590
591 b53_port_set_ucast_flood(dev, port, true);
592 b53_port_set_mcast_flood(dev, port, true);
593 b53_port_set_learning(dev, port, false);
594
595 if (dev->ops->irq_enable)
596 ret = dev->ops->irq_enable(dev, port);
597 if (ret)
598 return ret;
599
600 /* Clear the Rx and Tx disable bits and set to no spanning tree */
601 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
602
603 /* Set this port, and only this one to be in the default VLAN,
604 * if member of a bridge, restore its membership prior to
605 * bringing down this port.
606 */
607 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
608 pvlan &= ~0x1ff;
609 pvlan |= BIT(port);
610 pvlan |= dev->ports[port].vlan_ctl_mask;
611 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
612
613 b53_imp_vlan_setup(ds, cpu_port);
614
615 /* If EEE was enabled, restore it */
616 if (dev->ports[port].eee.eee_enabled)
617 b53_eee_enable_set(ds, port, true);
618
619 return 0;
620}
621EXPORT_SYMBOL(b53_enable_port);
622
623void b53_disable_port(struct dsa_switch *ds, int port)
624{
625 struct b53_device *dev = ds->priv;
626 u8 reg;
627
628 /* Disable Tx/Rx for the port */
629 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®);
630 reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
631 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
632
633 if (dev->ops->irq_disable)
634 dev->ops->irq_disable(dev, port);
635}
636EXPORT_SYMBOL(b53_disable_port);
637
638void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
639{
640 struct b53_device *dev = ds->priv;
641 bool tag_en = !(dev->tag_protocol == DSA_TAG_PROTO_NONE);
642 u8 hdr_ctl, val;
643 u16 reg;
644
645 /* Resolve which bit controls the Broadcom tag */
646 switch (port) {
647 case 8:
648 val = BRCM_HDR_P8_EN;
649 break;
650 case 7:
651 val = BRCM_HDR_P7_EN;
652 break;
653 case 5:
654 val = BRCM_HDR_P5_EN;
655 break;
656 default:
657 val = 0;
658 break;
659 }
660
661 /* Enable management mode if tagging is requested */
662 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &hdr_ctl);
663 if (tag_en)
664 hdr_ctl |= SM_SW_FWD_MODE;
665 else
666 hdr_ctl &= ~SM_SW_FWD_MODE;
667 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, hdr_ctl);
668
669 /* Configure the appropriate IMP port */
670 b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &hdr_ctl);
671 if (port == 8)
672 hdr_ctl |= GC_FRM_MGMT_PORT_MII;
673 else if (port == 5)
674 hdr_ctl |= GC_FRM_MGMT_PORT_M;
675 b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl);
676
677 /* Enable Broadcom tags for IMP port */
678 b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
679 if (tag_en)
680 hdr_ctl |= val;
681 else
682 hdr_ctl &= ~val;
683 b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
684
685 /* Registers below are only accessible on newer devices */
686 if (!is58xx(dev))
687 return;
688
689 /* Enable reception Broadcom tag for CPU TX (switch RX) to
690 * allow us to tag outgoing frames
691 */
692 b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, ®);
693 if (tag_en)
694 reg &= ~BIT(port);
695 else
696 reg |= BIT(port);
697 b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
698
699 /* Enable transmission of Broadcom tags from the switch (CPU RX) to
700 * allow delivering frames to the per-port net_devices
701 */
702 b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, ®);
703 if (tag_en)
704 reg &= ~BIT(port);
705 else
706 reg |= BIT(port);
707 b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
708}
709EXPORT_SYMBOL(b53_brcm_hdr_setup);
710
711static void b53_enable_cpu_port(struct b53_device *dev, int port)
712{
713 u8 port_ctrl;
714
715 /* BCM5325 CPU port is at 8 */
716 if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
717 port = B53_CPU_PORT;
718
719 port_ctrl = PORT_CTRL_RX_BCST_EN |
720 PORT_CTRL_RX_MCST_EN |
721 PORT_CTRL_RX_UCST_EN;
722 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
723
724 b53_brcm_hdr_setup(dev->ds, port);
725
726 b53_port_set_ucast_flood(dev, port, true);
727 b53_port_set_mcast_flood(dev, port, true);
728 b53_port_set_learning(dev, port, false);
729}
730
731static void b53_enable_mib(struct b53_device *dev)
732{
733 u8 gc;
734
735 b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
736 gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
737 b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
738}
739
740static u16 b53_default_pvid(struct b53_device *dev)
741{
742 if (is5325(dev) || is5365(dev))
743 return 1;
744 else
745 return 0;
746}
747
748static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
749{
750 struct b53_device *dev = ds->priv;
751
752 return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
753}
754
755int b53_configure_vlan(struct dsa_switch *ds)
756{
757 struct b53_device *dev = ds->priv;
758 struct b53_vlan vl = { 0 };
759 struct b53_vlan *v;
760 int i, def_vid;
761 u16 vid;
762
763 def_vid = b53_default_pvid(dev);
764
765 /* clear all vlan entries */
766 if (is5325(dev) || is5365(dev)) {
767 for (i = def_vid; i < dev->num_vlans; i++)
768 b53_set_vlan_entry(dev, i, &vl);
769 } else {
770 b53_do_vlan_op(dev, VTA_CMD_CLEAR);
771 }
772
773 b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering);
774
775 /* Create an untagged VLAN entry for the default PVID in case
776 * CONFIG_VLAN_8021Q is disabled and there are no calls to
777 * dsa_user_vlan_rx_add_vid() to create the default VLAN
778 * entry. Do this only when the tagging protocol is not
779 * DSA_TAG_PROTO_NONE
780 */
781 b53_for_each_port(dev, i) {
782 v = &dev->vlans[def_vid];
783 v->members |= BIT(i);
784 if (!b53_vlan_port_needs_forced_tagged(ds, i))
785 v->untag = v->members;
786 b53_write16(dev, B53_VLAN_PAGE,
787 B53_VLAN_PORT_DEF_TAG(i), def_vid);
788 }
789
790 /* Upon initial call we have not set-up any VLANs, but upon
791 * system resume, we need to restore all VLAN entries.
792 */
793 for (vid = def_vid; vid < dev->num_vlans; vid++) {
794 v = &dev->vlans[vid];
795
796 if (!v->members)
797 continue;
798
799 b53_set_vlan_entry(dev, vid, v);
800 b53_fast_age_vlan(dev, vid);
801 }
802
803 return 0;
804}
805EXPORT_SYMBOL(b53_configure_vlan);
806
807static void b53_switch_reset_gpio(struct b53_device *dev)
808{
809 int gpio = dev->reset_gpio;
810
811 if (gpio < 0)
812 return;
813
814 /* Reset sequence: RESET low(50ms)->high(20ms)
815 */
816 gpio_set_value(gpio, 0);
817 mdelay(50);
818
819 gpio_set_value(gpio, 1);
820 mdelay(20);
821
822 dev->current_page = 0xff;
823}
824
825static int b53_switch_reset(struct b53_device *dev)
826{
827 unsigned int timeout = 1000;
828 u8 mgmt, reg;
829
830 b53_switch_reset_gpio(dev);
831
832 if (is539x(dev)) {
833 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
834 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
835 }
836
837 /* This is specific to 58xx devices here, do not use is58xx() which
838 * covers the larger Starfigther 2 family, including 7445/7278 which
839 * still use this driver as a library and need to perform the reset
840 * earlier.
841 */
842 if (dev->chip_id == BCM58XX_DEVICE_ID ||
843 dev->chip_id == BCM583XX_DEVICE_ID) {
844 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
845 reg |= SW_RST | EN_SW_RST | EN_CH_RST;
846 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
847
848 do {
849 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
850 if (!(reg & SW_RST))
851 break;
852
853 usleep_range(1000, 2000);
854 } while (timeout-- > 0);
855
856 if (timeout == 0) {
857 dev_err(dev->dev,
858 "Timeout waiting for SW_RST to clear!\n");
859 return -ETIMEDOUT;
860 }
861 }
862
863 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
864
865 if (!(mgmt & SM_SW_FWD_EN)) {
866 mgmt &= ~SM_SW_FWD_MODE;
867 mgmt |= SM_SW_FWD_EN;
868
869 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
870 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
871
872 if (!(mgmt & SM_SW_FWD_EN)) {
873 dev_err(dev->dev, "Failed to enable switch!\n");
874 return -EINVAL;
875 }
876 }
877
878 b53_enable_mib(dev);
879
880 return b53_flush_arl(dev, FAST_AGE_STATIC);
881}
882
883static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
884{
885 struct b53_device *priv = ds->priv;
886 u16 value = 0;
887 int ret;
888
889 if (priv->ops->phy_read16)
890 ret = priv->ops->phy_read16(priv, addr, reg, &value);
891 else
892 ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
893 reg * 2, &value);
894
895 return ret ? ret : value;
896}
897
898static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
899{
900 struct b53_device *priv = ds->priv;
901
902 if (priv->ops->phy_write16)
903 return priv->ops->phy_write16(priv, addr, reg, val);
904
905 return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
906}
907
908static int b53_reset_switch(struct b53_device *priv)
909{
910 /* reset vlans */
911 memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
912 memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
913
914 priv->serdes_lane = B53_INVALID_LANE;
915
916 return b53_switch_reset(priv);
917}
918
919static int b53_apply_config(struct b53_device *priv)
920{
921 /* disable switching */
922 b53_set_forwarding(priv, 0);
923
924 b53_configure_vlan(priv->ds);
925
926 /* enable switching */
927 b53_set_forwarding(priv, 1);
928
929 return 0;
930}
931
932static void b53_reset_mib(struct b53_device *priv)
933{
934 u8 gc;
935
936 b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
937
938 b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
939 msleep(1);
940 b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
941 msleep(1);
942}
943
944static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
945{
946 if (is5365(dev))
947 return b53_mibs_65;
948 else if (is63xx(dev))
949 return b53_mibs_63xx;
950 else if (is58xx(dev))
951 return b53_mibs_58xx;
952 else
953 return b53_mibs;
954}
955
956static unsigned int b53_get_mib_size(struct b53_device *dev)
957{
958 if (is5365(dev))
959 return B53_MIBS_65_SIZE;
960 else if (is63xx(dev))
961 return B53_MIBS_63XX_SIZE;
962 else if (is58xx(dev))
963 return B53_MIBS_58XX_SIZE;
964 else
965 return B53_MIBS_SIZE;
966}
967
968static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port)
969{
970 /* These ports typically do not have built-in PHYs */
971 switch (port) {
972 case B53_CPU_PORT_25:
973 case 7:
974 case B53_CPU_PORT:
975 return NULL;
976 }
977
978 return mdiobus_get_phy(ds->user_mii_bus, port);
979}
980
981void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
982 uint8_t *data)
983{
984 struct b53_device *dev = ds->priv;
985 const struct b53_mib_desc *mibs = b53_get_mib(dev);
986 unsigned int mib_size = b53_get_mib_size(dev);
987 struct phy_device *phydev;
988 unsigned int i;
989
990 if (stringset == ETH_SS_STATS) {
991 for (i = 0; i < mib_size; i++)
992 ethtool_puts(&data, mibs[i].name);
993 } else if (stringset == ETH_SS_PHY_STATS) {
994 phydev = b53_get_phy_device(ds, port);
995 if (!phydev)
996 return;
997
998 phy_ethtool_get_strings(phydev, data);
999 }
1000}
1001EXPORT_SYMBOL(b53_get_strings);
1002
1003void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
1004{
1005 struct b53_device *dev = ds->priv;
1006 const struct b53_mib_desc *mibs = b53_get_mib(dev);
1007 unsigned int mib_size = b53_get_mib_size(dev);
1008 const struct b53_mib_desc *s;
1009 unsigned int i;
1010 u64 val = 0;
1011
1012 if (is5365(dev) && port == 5)
1013 port = 8;
1014
1015 mutex_lock(&dev->stats_mutex);
1016
1017 for (i = 0; i < mib_size; i++) {
1018 s = &mibs[i];
1019
1020 if (s->size == 8) {
1021 b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
1022 } else {
1023 u32 val32;
1024
1025 b53_read32(dev, B53_MIB_PAGE(port), s->offset,
1026 &val32);
1027 val = val32;
1028 }
1029 data[i] = (u64)val;
1030 }
1031
1032 mutex_unlock(&dev->stats_mutex);
1033}
1034EXPORT_SYMBOL(b53_get_ethtool_stats);
1035
1036void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data)
1037{
1038 struct phy_device *phydev;
1039
1040 phydev = b53_get_phy_device(ds, port);
1041 if (!phydev)
1042 return;
1043
1044 phy_ethtool_get_stats(phydev, NULL, data);
1045}
1046EXPORT_SYMBOL(b53_get_ethtool_phy_stats);
1047
1048int b53_get_sset_count(struct dsa_switch *ds, int port, int sset)
1049{
1050 struct b53_device *dev = ds->priv;
1051 struct phy_device *phydev;
1052
1053 if (sset == ETH_SS_STATS) {
1054 return b53_get_mib_size(dev);
1055 } else if (sset == ETH_SS_PHY_STATS) {
1056 phydev = b53_get_phy_device(ds, port);
1057 if (!phydev)
1058 return 0;
1059
1060 return phy_ethtool_get_sset_count(phydev);
1061 }
1062
1063 return 0;
1064}
1065EXPORT_SYMBOL(b53_get_sset_count);
1066
1067enum b53_devlink_resource_id {
1068 B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1069};
1070
1071static u64 b53_devlink_vlan_table_get(void *priv)
1072{
1073 struct b53_device *dev = priv;
1074 struct b53_vlan *vl;
1075 unsigned int i;
1076 u64 count = 0;
1077
1078 for (i = 0; i < dev->num_vlans; i++) {
1079 vl = &dev->vlans[i];
1080 if (vl->members)
1081 count++;
1082 }
1083
1084 return count;
1085}
1086
1087int b53_setup_devlink_resources(struct dsa_switch *ds)
1088{
1089 struct devlink_resource_size_params size_params;
1090 struct b53_device *dev = ds->priv;
1091 int err;
1092
1093 devlink_resource_size_params_init(&size_params, dev->num_vlans,
1094 dev->num_vlans,
1095 1, DEVLINK_RESOURCE_UNIT_ENTRY);
1096
1097 err = dsa_devlink_resource_register(ds, "VLAN", dev->num_vlans,
1098 B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1099 DEVLINK_RESOURCE_ID_PARENT_TOP,
1100 &size_params);
1101 if (err)
1102 goto out;
1103
1104 dsa_devlink_resource_occ_get_register(ds,
1105 B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1106 b53_devlink_vlan_table_get, dev);
1107
1108 return 0;
1109out:
1110 dsa_devlink_resources_unregister(ds);
1111 return err;
1112}
1113EXPORT_SYMBOL(b53_setup_devlink_resources);
1114
1115static int b53_setup(struct dsa_switch *ds)
1116{
1117 struct b53_device *dev = ds->priv;
1118 unsigned int port;
1119 int ret;
1120
1121 /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set
1122 * which forces the CPU port to be tagged in all VLANs.
1123 */
1124 ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE;
1125
1126 ret = b53_reset_switch(dev);
1127 if (ret) {
1128 dev_err(ds->dev, "failed to reset switch\n");
1129 return ret;
1130 }
1131
1132 b53_reset_mib(dev);
1133
1134 ret = b53_apply_config(dev);
1135 if (ret) {
1136 dev_err(ds->dev, "failed to apply configuration\n");
1137 return ret;
1138 }
1139
1140 /* Configure IMP/CPU port, disable all other ports. Enabled
1141 * ports will be configured with .port_enable
1142 */
1143 for (port = 0; port < dev->num_ports; port++) {
1144 if (dsa_is_cpu_port(ds, port))
1145 b53_enable_cpu_port(dev, port);
1146 else
1147 b53_disable_port(ds, port);
1148 }
1149
1150 return b53_setup_devlink_resources(ds);
1151}
1152
1153static void b53_teardown(struct dsa_switch *ds)
1154{
1155 dsa_devlink_resources_unregister(ds);
1156}
1157
1158static void b53_force_link(struct b53_device *dev, int port, int link)
1159{
1160 u8 reg, val, off;
1161
1162 /* Override the port settings */
1163 if (port == dev->imp_port) {
1164 off = B53_PORT_OVERRIDE_CTRL;
1165 val = PORT_OVERRIDE_EN;
1166 } else {
1167 off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1168 val = GMII_PO_EN;
1169 }
1170
1171 b53_read8(dev, B53_CTRL_PAGE, off, ®);
1172 reg |= val;
1173 if (link)
1174 reg |= PORT_OVERRIDE_LINK;
1175 else
1176 reg &= ~PORT_OVERRIDE_LINK;
1177 b53_write8(dev, B53_CTRL_PAGE, off, reg);
1178}
1179
1180static void b53_force_port_config(struct b53_device *dev, int port,
1181 int speed, int duplex,
1182 bool tx_pause, bool rx_pause)
1183{
1184 u8 reg, val, off;
1185
1186 /* Override the port settings */
1187 if (port == dev->imp_port) {
1188 off = B53_PORT_OVERRIDE_CTRL;
1189 val = PORT_OVERRIDE_EN;
1190 } else {
1191 off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1192 val = GMII_PO_EN;
1193 }
1194
1195 b53_read8(dev, B53_CTRL_PAGE, off, ®);
1196 reg |= val;
1197 if (duplex == DUPLEX_FULL)
1198 reg |= PORT_OVERRIDE_FULL_DUPLEX;
1199 else
1200 reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
1201
1202 switch (speed) {
1203 case 2000:
1204 reg |= PORT_OVERRIDE_SPEED_2000M;
1205 fallthrough;
1206 case SPEED_1000:
1207 reg |= PORT_OVERRIDE_SPEED_1000M;
1208 break;
1209 case SPEED_100:
1210 reg |= PORT_OVERRIDE_SPEED_100M;
1211 break;
1212 case SPEED_10:
1213 reg |= PORT_OVERRIDE_SPEED_10M;
1214 break;
1215 default:
1216 dev_err(dev->dev, "unknown speed: %d\n", speed);
1217 return;
1218 }
1219
1220 if (rx_pause)
1221 reg |= PORT_OVERRIDE_RX_FLOW;
1222 if (tx_pause)
1223 reg |= PORT_OVERRIDE_TX_FLOW;
1224
1225 b53_write8(dev, B53_CTRL_PAGE, off, reg);
1226}
1227
1228static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port,
1229 phy_interface_t interface)
1230{
1231 struct b53_device *dev = ds->priv;
1232 u8 rgmii_ctrl = 0, off;
1233
1234 if (port == dev->imp_port)
1235 off = B53_RGMII_CTRL_IMP;
1236 else
1237 off = B53_RGMII_CTRL_P(port);
1238
1239 b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
1240
1241 switch (interface) {
1242 case PHY_INTERFACE_MODE_RGMII_ID:
1243 rgmii_ctrl |= (RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
1244 break;
1245 case PHY_INTERFACE_MODE_RGMII_RXID:
1246 rgmii_ctrl &= ~(RGMII_CTRL_DLL_TXC);
1247 rgmii_ctrl |= RGMII_CTRL_DLL_RXC;
1248 break;
1249 case PHY_INTERFACE_MODE_RGMII_TXID:
1250 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC);
1251 rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
1252 break;
1253 case PHY_INTERFACE_MODE_RGMII:
1254 default:
1255 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
1256 break;
1257 }
1258
1259 if (port != dev->imp_port) {
1260 if (is63268(dev))
1261 rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE;
1262
1263 rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII;
1264 }
1265
1266 b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
1267
1268 dev_dbg(ds->dev, "Configured port %d for %s\n", port,
1269 phy_modes(interface));
1270}
1271
1272static void b53_adjust_531x5_rgmii(struct dsa_switch *ds, int port,
1273 phy_interface_t interface)
1274{
1275 struct b53_device *dev = ds->priv;
1276 u8 rgmii_ctrl = 0, off;
1277
1278 if (port == dev->imp_port)
1279 off = B53_RGMII_CTRL_IMP;
1280 else
1281 off = B53_RGMII_CTRL_P(port);
1282
1283 /* Configure the port RGMII clock delay by DLL disabled and
1284 * tx_clk aligned timing (restoring to reset defaults)
1285 */
1286 b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
1287 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
1288 RGMII_CTRL_TIMING_SEL);
1289
1290 /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
1291 * sure that we enable the port TX clock internal delay to
1292 * account for this internal delay that is inserted, otherwise
1293 * the switch won't be able to receive correctly.
1294 *
1295 * PHY_INTERFACE_MODE_RGMII means that we are not introducing
1296 * any delay neither on transmission nor reception, so the
1297 * BCM53125 must also be configured accordingly to account for
1298 * the lack of delay and introduce
1299 *
1300 * The BCM53125 switch has its RX clock and TX clock control
1301 * swapped, hence the reason why we modify the TX clock path in
1302 * the "RGMII" case
1303 */
1304 if (interface == PHY_INTERFACE_MODE_RGMII_TXID)
1305 rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
1306 if (interface == PHY_INTERFACE_MODE_RGMII)
1307 rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
1308 rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
1309 b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
1310
1311 dev_info(ds->dev, "Configured port %d for %s\n", port,
1312 phy_modes(interface));
1313}
1314
1315static void b53_adjust_5325_mii(struct dsa_switch *ds, int port)
1316{
1317 struct b53_device *dev = ds->priv;
1318 u8 reg = 0;
1319
1320 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1321 ®);
1322
1323 /* reverse mii needs to be enabled */
1324 if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1325 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1326 reg | PORT_OVERRIDE_RV_MII_25);
1327 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1328 ®);
1329
1330 if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1331 dev_err(ds->dev,
1332 "Failed to enable reverse MII mode\n");
1333 return;
1334 }
1335 }
1336}
1337
1338void b53_port_event(struct dsa_switch *ds, int port)
1339{
1340 struct b53_device *dev = ds->priv;
1341 bool link;
1342 u16 sts;
1343
1344 b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts);
1345 link = !!(sts & BIT(port));
1346 dsa_port_phylink_mac_change(ds, port, link);
1347}
1348EXPORT_SYMBOL(b53_port_event);
1349
1350static void b53_phylink_get_caps(struct dsa_switch *ds, int port,
1351 struct phylink_config *config)
1352{
1353 struct b53_device *dev = ds->priv;
1354
1355 /* Internal ports need GMII for PHYLIB */
1356 __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces);
1357
1358 /* These switches appear to support MII and RevMII too, but beyond
1359 * this, the code gives very few clues. FIXME: We probably need more
1360 * interface modes here.
1361 *
1362 * According to b53_srab_mux_init(), ports 3..5 can support:
1363 * SGMII, MII, GMII, RGMII or INTERNAL depending on the MUX setting.
1364 * However, the interface mode read from the MUX configuration is
1365 * not passed back to DSA, so phylink uses NA.
1366 * DT can specify RGMII for ports 0, 1.
1367 * For MDIO, port 8 can be RGMII_TXID.
1368 */
1369 __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
1370 __set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces);
1371
1372 config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
1373 MAC_10 | MAC_100;
1374
1375 /* 5325/5365 are not capable of gigabit speeds, everything else is.
1376 * Note: the original code also exclulded Gigagbit for MII, RevMII
1377 * and 802.3z modes. MII and RevMII are not able to work above 100M,
1378 * so will be excluded by the generic validator implementation.
1379 * However, the exclusion of Gigabit for 802.3z just seems wrong.
1380 */
1381 if (!(is5325(dev) || is5365(dev)))
1382 config->mac_capabilities |= MAC_1000;
1383
1384 /* Get the implementation specific capabilities */
1385 if (dev->ops->phylink_get_caps)
1386 dev->ops->phylink_get_caps(dev, port, config);
1387}
1388
1389static struct phylink_pcs *b53_phylink_mac_select_pcs(struct phylink_config *config,
1390 phy_interface_t interface)
1391{
1392 struct dsa_port *dp = dsa_phylink_to_port(config);
1393 struct b53_device *dev = dp->ds->priv;
1394
1395 if (!dev->ops->phylink_mac_select_pcs)
1396 return NULL;
1397
1398 return dev->ops->phylink_mac_select_pcs(dev, dp->index, interface);
1399}
1400
1401static void b53_phylink_mac_config(struct phylink_config *config,
1402 unsigned int mode,
1403 const struct phylink_link_state *state)
1404{
1405 struct dsa_port *dp = dsa_phylink_to_port(config);
1406 phy_interface_t interface = state->interface;
1407 struct dsa_switch *ds = dp->ds;
1408 struct b53_device *dev = ds->priv;
1409 int port = dp->index;
1410
1411 if (is63xx(dev) && port >= B53_63XX_RGMII0)
1412 b53_adjust_63xx_rgmii(ds, port, interface);
1413
1414 if (mode == MLO_AN_FIXED) {
1415 if (is531x5(dev) && phy_interface_mode_is_rgmii(interface))
1416 b53_adjust_531x5_rgmii(ds, port, interface);
1417
1418 /* configure MII port if necessary */
1419 if (is5325(dev))
1420 b53_adjust_5325_mii(ds, port);
1421 }
1422}
1423
1424static void b53_phylink_mac_link_down(struct phylink_config *config,
1425 unsigned int mode,
1426 phy_interface_t interface)
1427{
1428 struct dsa_port *dp = dsa_phylink_to_port(config);
1429 struct b53_device *dev = dp->ds->priv;
1430 int port = dp->index;
1431
1432 if (mode == MLO_AN_PHY)
1433 return;
1434
1435 if (mode == MLO_AN_FIXED) {
1436 b53_force_link(dev, port, false);
1437 return;
1438 }
1439
1440 if (phy_interface_mode_is_8023z(interface) &&
1441 dev->ops->serdes_link_set)
1442 dev->ops->serdes_link_set(dev, port, mode, interface, false);
1443}
1444
1445static void b53_phylink_mac_link_up(struct phylink_config *config,
1446 struct phy_device *phydev,
1447 unsigned int mode,
1448 phy_interface_t interface,
1449 int speed, int duplex,
1450 bool tx_pause, bool rx_pause)
1451{
1452 struct dsa_port *dp = dsa_phylink_to_port(config);
1453 struct dsa_switch *ds = dp->ds;
1454 struct b53_device *dev = ds->priv;
1455 struct ethtool_keee *p = &dev->ports[dp->index].eee;
1456 int port = dp->index;
1457
1458 if (mode == MLO_AN_PHY) {
1459 /* Re-negotiate EEE if it was enabled already */
1460 p->eee_enabled = b53_eee_init(ds, port, phydev);
1461 return;
1462 }
1463
1464 if (mode == MLO_AN_FIXED) {
1465 /* Force flow control on BCM5301x's CPU port */
1466 if (is5301x(dev) && dsa_is_cpu_port(ds, port))
1467 tx_pause = rx_pause = true;
1468
1469 b53_force_port_config(dev, port, speed, duplex,
1470 tx_pause, rx_pause);
1471 b53_force_link(dev, port, true);
1472 return;
1473 }
1474
1475 if (phy_interface_mode_is_8023z(interface) &&
1476 dev->ops->serdes_link_set)
1477 dev->ops->serdes_link_set(dev, port, mode, interface, true);
1478}
1479
1480int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
1481 struct netlink_ext_ack *extack)
1482{
1483 struct b53_device *dev = ds->priv;
1484
1485 b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering);
1486
1487 return 0;
1488}
1489EXPORT_SYMBOL(b53_vlan_filtering);
1490
1491static int b53_vlan_prepare(struct dsa_switch *ds, int port,
1492 const struct switchdev_obj_port_vlan *vlan)
1493{
1494 struct b53_device *dev = ds->priv;
1495
1496 if ((is5325(dev) || is5365(dev)) && vlan->vid == 0)
1497 return -EOPNOTSUPP;
1498
1499 /* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of
1500 * receiving VLAN tagged frames at all, we can still allow the port to
1501 * be configured for egress untagged.
1502 */
1503 if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 &&
1504 !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED))
1505 return -EINVAL;
1506
1507 if (vlan->vid >= dev->num_vlans)
1508 return -ERANGE;
1509
1510 b53_enable_vlan(dev, port, true, ds->vlan_filtering);
1511
1512 return 0;
1513}
1514
1515int b53_vlan_add(struct dsa_switch *ds, int port,
1516 const struct switchdev_obj_port_vlan *vlan,
1517 struct netlink_ext_ack *extack)
1518{
1519 struct b53_device *dev = ds->priv;
1520 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1521 bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
1522 struct b53_vlan *vl;
1523 int err;
1524
1525 err = b53_vlan_prepare(ds, port, vlan);
1526 if (err)
1527 return err;
1528
1529 vl = &dev->vlans[vlan->vid];
1530
1531 b53_get_vlan_entry(dev, vlan->vid, vl);
1532
1533 if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev))
1534 untagged = true;
1535
1536 vl->members |= BIT(port);
1537 if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
1538 vl->untag |= BIT(port);
1539 else
1540 vl->untag &= ~BIT(port);
1541
1542 b53_set_vlan_entry(dev, vlan->vid, vl);
1543 b53_fast_age_vlan(dev, vlan->vid);
1544
1545 if (pvid && !dsa_is_cpu_port(ds, port)) {
1546 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
1547 vlan->vid);
1548 b53_fast_age_vlan(dev, vlan->vid);
1549 }
1550
1551 return 0;
1552}
1553EXPORT_SYMBOL(b53_vlan_add);
1554
1555int b53_vlan_del(struct dsa_switch *ds, int port,
1556 const struct switchdev_obj_port_vlan *vlan)
1557{
1558 struct b53_device *dev = ds->priv;
1559 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1560 struct b53_vlan *vl;
1561 u16 pvid;
1562
1563 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
1564
1565 vl = &dev->vlans[vlan->vid];
1566
1567 b53_get_vlan_entry(dev, vlan->vid, vl);
1568
1569 vl->members &= ~BIT(port);
1570
1571 if (pvid == vlan->vid)
1572 pvid = b53_default_pvid(dev);
1573
1574 if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
1575 vl->untag &= ~(BIT(port));
1576
1577 b53_set_vlan_entry(dev, vlan->vid, vl);
1578 b53_fast_age_vlan(dev, vlan->vid);
1579
1580 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
1581 b53_fast_age_vlan(dev, pvid);
1582
1583 return 0;
1584}
1585EXPORT_SYMBOL(b53_vlan_del);
1586
1587/* Address Resolution Logic routines. Caller must hold &dev->arl_mutex. */
1588static int b53_arl_op_wait(struct b53_device *dev)
1589{
1590 unsigned int timeout = 10;
1591 u8 reg;
1592
1593 do {
1594 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®);
1595 if (!(reg & ARLTBL_START_DONE))
1596 return 0;
1597
1598 usleep_range(1000, 2000);
1599 } while (timeout--);
1600
1601 dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
1602
1603 return -ETIMEDOUT;
1604}
1605
1606static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
1607{
1608 u8 reg;
1609
1610 if (op > ARLTBL_RW)
1611 return -EINVAL;
1612
1613 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®);
1614 reg |= ARLTBL_START_DONE;
1615 if (op)
1616 reg |= ARLTBL_RW;
1617 else
1618 reg &= ~ARLTBL_RW;
1619 if (dev->vlan_enabled)
1620 reg &= ~ARLTBL_IVL_SVL_SELECT;
1621 else
1622 reg |= ARLTBL_IVL_SVL_SELECT;
1623 b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
1624
1625 return b53_arl_op_wait(dev);
1626}
1627
1628static int b53_arl_read(struct b53_device *dev, u64 mac,
1629 u16 vid, struct b53_arl_entry *ent, u8 *idx)
1630{
1631 DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
1632 unsigned int i;
1633 int ret;
1634
1635 ret = b53_arl_op_wait(dev);
1636 if (ret)
1637 return ret;
1638
1639 bitmap_zero(free_bins, dev->num_arl_bins);
1640
1641 /* Read the bins */
1642 for (i = 0; i < dev->num_arl_bins; i++) {
1643 u64 mac_vid;
1644 u32 fwd_entry;
1645
1646 b53_read64(dev, B53_ARLIO_PAGE,
1647 B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
1648 b53_read32(dev, B53_ARLIO_PAGE,
1649 B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
1650 b53_arl_to_entry(ent, mac_vid, fwd_entry);
1651
1652 if (!(fwd_entry & ARLTBL_VALID)) {
1653 set_bit(i, free_bins);
1654 continue;
1655 }
1656 if ((mac_vid & ARLTBL_MAC_MASK) != mac)
1657 continue;
1658 if (dev->vlan_enabled &&
1659 ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
1660 continue;
1661 *idx = i;
1662 return 0;
1663 }
1664
1665 *idx = find_first_bit(free_bins, dev->num_arl_bins);
1666 return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
1667}
1668
1669static int b53_arl_op(struct b53_device *dev, int op, int port,
1670 const unsigned char *addr, u16 vid, bool is_valid)
1671{
1672 struct b53_arl_entry ent;
1673 u32 fwd_entry;
1674 u64 mac, mac_vid = 0;
1675 u8 idx = 0;
1676 int ret;
1677
1678 /* Convert the array into a 64-bit MAC */
1679 mac = ether_addr_to_u64(addr);
1680
1681 /* Perform a read for the given MAC and VID */
1682 b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
1683 b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
1684
1685 /* Issue a read operation for this MAC */
1686 ret = b53_arl_rw_op(dev, 1);
1687 if (ret)
1688 return ret;
1689
1690 ret = b53_arl_read(dev, mac, vid, &ent, &idx);
1691
1692 /* If this is a read, just finish now */
1693 if (op)
1694 return ret;
1695
1696 switch (ret) {
1697 case -ETIMEDOUT:
1698 return ret;
1699 case -ENOSPC:
1700 dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
1701 addr, vid);
1702 return is_valid ? ret : 0;
1703 case -ENOENT:
1704 /* We could not find a matching MAC, so reset to a new entry */
1705 dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
1706 addr, vid, idx);
1707 fwd_entry = 0;
1708 break;
1709 default:
1710 dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
1711 addr, vid, idx);
1712 break;
1713 }
1714
1715 /* For multicast address, the port is a bitmask and the validity
1716 * is determined by having at least one port being still active
1717 */
1718 if (!is_multicast_ether_addr(addr)) {
1719 ent.port = port;
1720 ent.is_valid = is_valid;
1721 } else {
1722 if (is_valid)
1723 ent.port |= BIT(port);
1724 else
1725 ent.port &= ~BIT(port);
1726
1727 ent.is_valid = !!(ent.port);
1728 }
1729
1730 ent.vid = vid;
1731 ent.is_static = true;
1732 ent.is_age = false;
1733 memcpy(ent.mac, addr, ETH_ALEN);
1734 b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
1735
1736 b53_write64(dev, B53_ARLIO_PAGE,
1737 B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
1738 b53_write32(dev, B53_ARLIO_PAGE,
1739 B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
1740
1741 return b53_arl_rw_op(dev, 0);
1742}
1743
1744int b53_fdb_add(struct dsa_switch *ds, int port,
1745 const unsigned char *addr, u16 vid,
1746 struct dsa_db db)
1747{
1748 struct b53_device *priv = ds->priv;
1749 int ret;
1750
1751 /* 5325 and 5365 require some more massaging, but could
1752 * be supported eventually
1753 */
1754 if (is5325(priv) || is5365(priv))
1755 return -EOPNOTSUPP;
1756
1757 mutex_lock(&priv->arl_mutex);
1758 ret = b53_arl_op(priv, 0, port, addr, vid, true);
1759 mutex_unlock(&priv->arl_mutex);
1760
1761 return ret;
1762}
1763EXPORT_SYMBOL(b53_fdb_add);
1764
1765int b53_fdb_del(struct dsa_switch *ds, int port,
1766 const unsigned char *addr, u16 vid,
1767 struct dsa_db db)
1768{
1769 struct b53_device *priv = ds->priv;
1770 int ret;
1771
1772 mutex_lock(&priv->arl_mutex);
1773 ret = b53_arl_op(priv, 0, port, addr, vid, false);
1774 mutex_unlock(&priv->arl_mutex);
1775
1776 return ret;
1777}
1778EXPORT_SYMBOL(b53_fdb_del);
1779
1780static int b53_arl_search_wait(struct b53_device *dev)
1781{
1782 unsigned int timeout = 1000;
1783 u8 reg;
1784
1785 do {
1786 b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, ®);
1787 if (!(reg & ARL_SRCH_STDN))
1788 return 0;
1789
1790 if (reg & ARL_SRCH_VLID)
1791 return 0;
1792
1793 usleep_range(1000, 2000);
1794 } while (timeout--);
1795
1796 return -ETIMEDOUT;
1797}
1798
1799static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
1800 struct b53_arl_entry *ent)
1801{
1802 u64 mac_vid;
1803 u32 fwd_entry;
1804
1805 b53_read64(dev, B53_ARLIO_PAGE,
1806 B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
1807 b53_read32(dev, B53_ARLIO_PAGE,
1808 B53_ARL_SRCH_RSTL(idx), &fwd_entry);
1809 b53_arl_to_entry(ent, mac_vid, fwd_entry);
1810}
1811
1812static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
1813 dsa_fdb_dump_cb_t *cb, void *data)
1814{
1815 if (!ent->is_valid)
1816 return 0;
1817
1818 if (port != ent->port)
1819 return 0;
1820
1821 return cb(ent->mac, ent->vid, ent->is_static, data);
1822}
1823
1824int b53_fdb_dump(struct dsa_switch *ds, int port,
1825 dsa_fdb_dump_cb_t *cb, void *data)
1826{
1827 struct b53_device *priv = ds->priv;
1828 struct b53_arl_entry results[2];
1829 unsigned int count = 0;
1830 int ret;
1831 u8 reg;
1832
1833 mutex_lock(&priv->arl_mutex);
1834
1835 /* Start search operation */
1836 reg = ARL_SRCH_STDN;
1837 b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
1838
1839 do {
1840 ret = b53_arl_search_wait(priv);
1841 if (ret)
1842 break;
1843
1844 b53_arl_search_rd(priv, 0, &results[0]);
1845 ret = b53_fdb_copy(port, &results[0], cb, data);
1846 if (ret)
1847 break;
1848
1849 if (priv->num_arl_bins > 2) {
1850 b53_arl_search_rd(priv, 1, &results[1]);
1851 ret = b53_fdb_copy(port, &results[1], cb, data);
1852 if (ret)
1853 break;
1854
1855 if (!results[0].is_valid && !results[1].is_valid)
1856 break;
1857 }
1858
1859 } while (count++ < b53_max_arl_entries(priv) / 2);
1860
1861 mutex_unlock(&priv->arl_mutex);
1862
1863 return 0;
1864}
1865EXPORT_SYMBOL(b53_fdb_dump);
1866
1867int b53_mdb_add(struct dsa_switch *ds, int port,
1868 const struct switchdev_obj_port_mdb *mdb,
1869 struct dsa_db db)
1870{
1871 struct b53_device *priv = ds->priv;
1872 int ret;
1873
1874 /* 5325 and 5365 require some more massaging, but could
1875 * be supported eventually
1876 */
1877 if (is5325(priv) || is5365(priv))
1878 return -EOPNOTSUPP;
1879
1880 mutex_lock(&priv->arl_mutex);
1881 ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, true);
1882 mutex_unlock(&priv->arl_mutex);
1883
1884 return ret;
1885}
1886EXPORT_SYMBOL(b53_mdb_add);
1887
1888int b53_mdb_del(struct dsa_switch *ds, int port,
1889 const struct switchdev_obj_port_mdb *mdb,
1890 struct dsa_db db)
1891{
1892 struct b53_device *priv = ds->priv;
1893 int ret;
1894
1895 mutex_lock(&priv->arl_mutex);
1896 ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, false);
1897 mutex_unlock(&priv->arl_mutex);
1898 if (ret)
1899 dev_err(ds->dev, "failed to delete MDB entry\n");
1900
1901 return ret;
1902}
1903EXPORT_SYMBOL(b53_mdb_del);
1904
1905int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
1906 bool *tx_fwd_offload, struct netlink_ext_ack *extack)
1907{
1908 struct b53_device *dev = ds->priv;
1909 s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1910 u16 pvlan, reg;
1911 unsigned int i;
1912
1913 /* On 7278, port 7 which connects to the ASP should only receive
1914 * traffic from matching CFP rules.
1915 */
1916 if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
1917 return -EINVAL;
1918
1919 /* Make this port leave the all VLANs join since we will have proper
1920 * VLAN entries from now on
1921 */
1922 if (is58xx(dev)) {
1923 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®);
1924 reg &= ~BIT(port);
1925 if ((reg & BIT(cpu_port)) == BIT(cpu_port))
1926 reg &= ~BIT(cpu_port);
1927 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1928 }
1929
1930 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1931
1932 b53_for_each_port(dev, i) {
1933 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1934 continue;
1935
1936 /* Add this local port to the remote port VLAN control
1937 * membership and update the remote port bitmask
1938 */
1939 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®);
1940 reg |= BIT(port);
1941 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1942 dev->ports[i].vlan_ctl_mask = reg;
1943
1944 pvlan |= BIT(i);
1945 }
1946
1947 /* Configure the local port VLAN control membership to include
1948 * remote ports and update the local port bitmask
1949 */
1950 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1951 dev->ports[port].vlan_ctl_mask = pvlan;
1952
1953 return 0;
1954}
1955EXPORT_SYMBOL(b53_br_join);
1956
1957void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge)
1958{
1959 struct b53_device *dev = ds->priv;
1960 struct b53_vlan *vl = &dev->vlans[0];
1961 s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1962 unsigned int i;
1963 u16 pvlan, reg, pvid;
1964
1965 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1966
1967 b53_for_each_port(dev, i) {
1968 /* Don't touch the remaining ports */
1969 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1970 continue;
1971
1972 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®);
1973 reg &= ~BIT(port);
1974 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1975 dev->ports[port].vlan_ctl_mask = reg;
1976
1977 /* Prevent self removal to preserve isolation */
1978 if (port != i)
1979 pvlan &= ~BIT(i);
1980 }
1981
1982 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1983 dev->ports[port].vlan_ctl_mask = pvlan;
1984
1985 pvid = b53_default_pvid(dev);
1986
1987 /* Make this port join all VLANs without VLAN entries */
1988 if (is58xx(dev)) {
1989 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®);
1990 reg |= BIT(port);
1991 if (!(reg & BIT(cpu_port)))
1992 reg |= BIT(cpu_port);
1993 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1994 } else {
1995 b53_get_vlan_entry(dev, pvid, vl);
1996 vl->members |= BIT(port) | BIT(cpu_port);
1997 vl->untag |= BIT(port) | BIT(cpu_port);
1998 b53_set_vlan_entry(dev, pvid, vl);
1999 }
2000}
2001EXPORT_SYMBOL(b53_br_leave);
2002
2003void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
2004{
2005 struct b53_device *dev = ds->priv;
2006 u8 hw_state;
2007 u8 reg;
2008
2009 switch (state) {
2010 case BR_STATE_DISABLED:
2011 hw_state = PORT_CTRL_DIS_STATE;
2012 break;
2013 case BR_STATE_LISTENING:
2014 hw_state = PORT_CTRL_LISTEN_STATE;
2015 break;
2016 case BR_STATE_LEARNING:
2017 hw_state = PORT_CTRL_LEARN_STATE;
2018 break;
2019 case BR_STATE_FORWARDING:
2020 hw_state = PORT_CTRL_FWD_STATE;
2021 break;
2022 case BR_STATE_BLOCKING:
2023 hw_state = PORT_CTRL_BLOCK_STATE;
2024 break;
2025 default:
2026 dev_err(ds->dev, "invalid STP state: %d\n", state);
2027 return;
2028 }
2029
2030 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®);
2031 reg &= ~PORT_CTRL_STP_STATE_MASK;
2032 reg |= hw_state;
2033 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
2034}
2035EXPORT_SYMBOL(b53_br_set_stp_state);
2036
2037void b53_br_fast_age(struct dsa_switch *ds, int port)
2038{
2039 struct b53_device *dev = ds->priv;
2040
2041 if (b53_fast_age_port(dev, port))
2042 dev_err(ds->dev, "fast ageing failed\n");
2043}
2044EXPORT_SYMBOL(b53_br_fast_age);
2045
2046int b53_br_flags_pre(struct dsa_switch *ds, int port,
2047 struct switchdev_brport_flags flags,
2048 struct netlink_ext_ack *extack)
2049{
2050 if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING))
2051 return -EINVAL;
2052
2053 return 0;
2054}
2055EXPORT_SYMBOL(b53_br_flags_pre);
2056
2057int b53_br_flags(struct dsa_switch *ds, int port,
2058 struct switchdev_brport_flags flags,
2059 struct netlink_ext_ack *extack)
2060{
2061 if (flags.mask & BR_FLOOD)
2062 b53_port_set_ucast_flood(ds->priv, port,
2063 !!(flags.val & BR_FLOOD));
2064 if (flags.mask & BR_MCAST_FLOOD)
2065 b53_port_set_mcast_flood(ds->priv, port,
2066 !!(flags.val & BR_MCAST_FLOOD));
2067 if (flags.mask & BR_LEARNING)
2068 b53_port_set_learning(ds->priv, port,
2069 !!(flags.val & BR_LEARNING));
2070
2071 return 0;
2072}
2073EXPORT_SYMBOL(b53_br_flags);
2074
2075static bool b53_possible_cpu_port(struct dsa_switch *ds, int port)
2076{
2077 /* Broadcom switches will accept enabling Broadcom tags on the
2078 * following ports: 5, 7 and 8, any other port is not supported
2079 */
2080 switch (port) {
2081 case B53_CPU_PORT_25:
2082 case 7:
2083 case B53_CPU_PORT:
2084 return true;
2085 }
2086
2087 return false;
2088}
2089
2090static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port,
2091 enum dsa_tag_protocol tag_protocol)
2092{
2093 bool ret = b53_possible_cpu_port(ds, port);
2094
2095 if (!ret) {
2096 dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n",
2097 port);
2098 return ret;
2099 }
2100
2101 switch (tag_protocol) {
2102 case DSA_TAG_PROTO_BRCM:
2103 case DSA_TAG_PROTO_BRCM_PREPEND:
2104 dev_warn(ds->dev,
2105 "Port %d is stacked to Broadcom tag switch\n", port);
2106 ret = false;
2107 break;
2108 default:
2109 ret = true;
2110 break;
2111 }
2112
2113 return ret;
2114}
2115
2116enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
2117 enum dsa_tag_protocol mprot)
2118{
2119 struct b53_device *dev = ds->priv;
2120
2121 if (!b53_can_enable_brcm_tags(ds, port, mprot)) {
2122 dev->tag_protocol = DSA_TAG_PROTO_NONE;
2123 goto out;
2124 }
2125
2126 /* Older models require a different 6 byte tag */
2127 if (is5325(dev) || is5365(dev) || is63xx(dev)) {
2128 dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
2129 goto out;
2130 }
2131
2132 /* Broadcom BCM58xx chips have a flow accelerator on Port 8
2133 * which requires us to use the prepended Broadcom tag type
2134 */
2135 if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) {
2136 dev->tag_protocol = DSA_TAG_PROTO_BRCM_PREPEND;
2137 goto out;
2138 }
2139
2140 dev->tag_protocol = DSA_TAG_PROTO_BRCM;
2141out:
2142 return dev->tag_protocol;
2143}
2144EXPORT_SYMBOL(b53_get_tag_protocol);
2145
2146int b53_mirror_add(struct dsa_switch *ds, int port,
2147 struct dsa_mall_mirror_tc_entry *mirror, bool ingress,
2148 struct netlink_ext_ack *extack)
2149{
2150 struct b53_device *dev = ds->priv;
2151 u16 reg, loc;
2152
2153 if (ingress)
2154 loc = B53_IG_MIR_CTL;
2155 else
2156 loc = B53_EG_MIR_CTL;
2157
2158 b53_read16(dev, B53_MGMT_PAGE, loc, ®);
2159 reg |= BIT(port);
2160 b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2161
2162 b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®);
2163 reg &= ~CAP_PORT_MASK;
2164 reg |= mirror->to_local_port;
2165 reg |= MIRROR_EN;
2166 b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2167
2168 return 0;
2169}
2170EXPORT_SYMBOL(b53_mirror_add);
2171
2172void b53_mirror_del(struct dsa_switch *ds, int port,
2173 struct dsa_mall_mirror_tc_entry *mirror)
2174{
2175 struct b53_device *dev = ds->priv;
2176 bool loc_disable = false, other_loc_disable = false;
2177 u16 reg, loc;
2178
2179 if (mirror->ingress)
2180 loc = B53_IG_MIR_CTL;
2181 else
2182 loc = B53_EG_MIR_CTL;
2183
2184 /* Update the desired ingress/egress register */
2185 b53_read16(dev, B53_MGMT_PAGE, loc, ®);
2186 reg &= ~BIT(port);
2187 if (!(reg & MIRROR_MASK))
2188 loc_disable = true;
2189 b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2190
2191 /* Now look at the other one to know if we can disable mirroring
2192 * entirely
2193 */
2194 if (mirror->ingress)
2195 b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, ®);
2196 else
2197 b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, ®);
2198 if (!(reg & MIRROR_MASK))
2199 other_loc_disable = true;
2200
2201 b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®);
2202 /* Both no longer have ports, let's disable mirroring */
2203 if (loc_disable && other_loc_disable) {
2204 reg &= ~MIRROR_EN;
2205 reg &= ~mirror->to_local_port;
2206 }
2207 b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2208}
2209EXPORT_SYMBOL(b53_mirror_del);
2210
2211/* Returns 0 if EEE was not enabled, or 1 otherwise
2212 */
2213int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
2214{
2215 int ret;
2216
2217 ret = phy_init_eee(phy, false);
2218 if (ret)
2219 return 0;
2220
2221 b53_eee_enable_set(ds, port, true);
2222
2223 return 1;
2224}
2225EXPORT_SYMBOL(b53_eee_init);
2226
2227int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e)
2228{
2229 struct b53_device *dev = ds->priv;
2230
2231 if (is5325(dev) || is5365(dev))
2232 return -EOPNOTSUPP;
2233
2234 return 0;
2235}
2236EXPORT_SYMBOL(b53_get_mac_eee);
2237
2238int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e)
2239{
2240 struct b53_device *dev = ds->priv;
2241 struct ethtool_keee *p = &dev->ports[port].eee;
2242
2243 if (is5325(dev) || is5365(dev))
2244 return -EOPNOTSUPP;
2245
2246 p->eee_enabled = e->eee_enabled;
2247 b53_eee_enable_set(ds, port, e->eee_enabled);
2248
2249 return 0;
2250}
2251EXPORT_SYMBOL(b53_set_mac_eee);
2252
2253static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
2254{
2255 struct b53_device *dev = ds->priv;
2256 bool enable_jumbo;
2257 bool allow_10_100;
2258
2259 if (is5325(dev) || is5365(dev))
2260 return 0;
2261
2262 if (!dsa_is_cpu_port(ds, port))
2263 return 0;
2264
2265 enable_jumbo = (mtu > ETH_DATA_LEN);
2266 allow_10_100 = !is63xx(dev);
2267
2268 return b53_set_jumbo(dev, enable_jumbo, allow_10_100);
2269}
2270
2271static int b53_get_max_mtu(struct dsa_switch *ds, int port)
2272{
2273 struct b53_device *dev = ds->priv;
2274
2275 if (is5325(dev) || is5365(dev))
2276 return B53_MAX_MTU_25;
2277
2278 return B53_MAX_MTU;
2279}
2280
2281static const struct phylink_mac_ops b53_phylink_mac_ops = {
2282 .mac_select_pcs = b53_phylink_mac_select_pcs,
2283 .mac_config = b53_phylink_mac_config,
2284 .mac_link_down = b53_phylink_mac_link_down,
2285 .mac_link_up = b53_phylink_mac_link_up,
2286};
2287
2288static const struct dsa_switch_ops b53_switch_ops = {
2289 .get_tag_protocol = b53_get_tag_protocol,
2290 .setup = b53_setup,
2291 .teardown = b53_teardown,
2292 .get_strings = b53_get_strings,
2293 .get_ethtool_stats = b53_get_ethtool_stats,
2294 .get_sset_count = b53_get_sset_count,
2295 .get_ethtool_phy_stats = b53_get_ethtool_phy_stats,
2296 .phy_read = b53_phy_read16,
2297 .phy_write = b53_phy_write16,
2298 .phylink_get_caps = b53_phylink_get_caps,
2299 .port_enable = b53_enable_port,
2300 .port_disable = b53_disable_port,
2301 .get_mac_eee = b53_get_mac_eee,
2302 .set_mac_eee = b53_set_mac_eee,
2303 .port_bridge_join = b53_br_join,
2304 .port_bridge_leave = b53_br_leave,
2305 .port_pre_bridge_flags = b53_br_flags_pre,
2306 .port_bridge_flags = b53_br_flags,
2307 .port_stp_state_set = b53_br_set_stp_state,
2308 .port_fast_age = b53_br_fast_age,
2309 .port_vlan_filtering = b53_vlan_filtering,
2310 .port_vlan_add = b53_vlan_add,
2311 .port_vlan_del = b53_vlan_del,
2312 .port_fdb_dump = b53_fdb_dump,
2313 .port_fdb_add = b53_fdb_add,
2314 .port_fdb_del = b53_fdb_del,
2315 .port_mirror_add = b53_mirror_add,
2316 .port_mirror_del = b53_mirror_del,
2317 .port_mdb_add = b53_mdb_add,
2318 .port_mdb_del = b53_mdb_del,
2319 .port_max_mtu = b53_get_max_mtu,
2320 .port_change_mtu = b53_change_mtu,
2321};
2322
2323struct b53_chip_data {
2324 u32 chip_id;
2325 const char *dev_name;
2326 u16 vlans;
2327 u16 enabled_ports;
2328 u8 imp_port;
2329 u8 cpu_port;
2330 u8 vta_regs[3];
2331 u8 arl_bins;
2332 u16 arl_buckets;
2333 u8 duplex_reg;
2334 u8 jumbo_pm_reg;
2335 u8 jumbo_size_reg;
2336};
2337
2338#define B53_VTA_REGS \
2339 { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
2340#define B53_VTA_REGS_9798 \
2341 { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
2342#define B53_VTA_REGS_63XX \
2343 { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
2344
2345static const struct b53_chip_data b53_switch_chips[] = {
2346 {
2347 .chip_id = BCM5325_DEVICE_ID,
2348 .dev_name = "BCM5325",
2349 .vlans = 16,
2350 .enabled_ports = 0x3f,
2351 .arl_bins = 2,
2352 .arl_buckets = 1024,
2353 .imp_port = 5,
2354 .duplex_reg = B53_DUPLEX_STAT_FE,
2355 },
2356 {
2357 .chip_id = BCM5365_DEVICE_ID,
2358 .dev_name = "BCM5365",
2359 .vlans = 256,
2360 .enabled_ports = 0x3f,
2361 .arl_bins = 2,
2362 .arl_buckets = 1024,
2363 .imp_port = 5,
2364 .duplex_reg = B53_DUPLEX_STAT_FE,
2365 },
2366 {
2367 .chip_id = BCM5389_DEVICE_ID,
2368 .dev_name = "BCM5389",
2369 .vlans = 4096,
2370 .enabled_ports = 0x11f,
2371 .arl_bins = 4,
2372 .arl_buckets = 1024,
2373 .imp_port = 8,
2374 .vta_regs = B53_VTA_REGS,
2375 .duplex_reg = B53_DUPLEX_STAT_GE,
2376 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2377 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2378 },
2379 {
2380 .chip_id = BCM5395_DEVICE_ID,
2381 .dev_name = "BCM5395",
2382 .vlans = 4096,
2383 .enabled_ports = 0x11f,
2384 .arl_bins = 4,
2385 .arl_buckets = 1024,
2386 .imp_port = 8,
2387 .vta_regs = B53_VTA_REGS,
2388 .duplex_reg = B53_DUPLEX_STAT_GE,
2389 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2390 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2391 },
2392 {
2393 .chip_id = BCM5397_DEVICE_ID,
2394 .dev_name = "BCM5397",
2395 .vlans = 4096,
2396 .enabled_ports = 0x11f,
2397 .arl_bins = 4,
2398 .arl_buckets = 1024,
2399 .imp_port = 8,
2400 .vta_regs = B53_VTA_REGS_9798,
2401 .duplex_reg = B53_DUPLEX_STAT_GE,
2402 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2403 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2404 },
2405 {
2406 .chip_id = BCM5398_DEVICE_ID,
2407 .dev_name = "BCM5398",
2408 .vlans = 4096,
2409 .enabled_ports = 0x17f,
2410 .arl_bins = 4,
2411 .arl_buckets = 1024,
2412 .imp_port = 8,
2413 .vta_regs = B53_VTA_REGS_9798,
2414 .duplex_reg = B53_DUPLEX_STAT_GE,
2415 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2416 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2417 },
2418 {
2419 .chip_id = BCM53115_DEVICE_ID,
2420 .dev_name = "BCM53115",
2421 .vlans = 4096,
2422 .enabled_ports = 0x11f,
2423 .arl_bins = 4,
2424 .arl_buckets = 1024,
2425 .vta_regs = B53_VTA_REGS,
2426 .imp_port = 8,
2427 .duplex_reg = B53_DUPLEX_STAT_GE,
2428 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2429 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2430 },
2431 {
2432 .chip_id = BCM53125_DEVICE_ID,
2433 .dev_name = "BCM53125",
2434 .vlans = 4096,
2435 .enabled_ports = 0x1ff,
2436 .arl_bins = 4,
2437 .arl_buckets = 1024,
2438 .imp_port = 8,
2439 .vta_regs = B53_VTA_REGS,
2440 .duplex_reg = B53_DUPLEX_STAT_GE,
2441 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2442 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2443 },
2444 {
2445 .chip_id = BCM53128_DEVICE_ID,
2446 .dev_name = "BCM53128",
2447 .vlans = 4096,
2448 .enabled_ports = 0x1ff,
2449 .arl_bins = 4,
2450 .arl_buckets = 1024,
2451 .imp_port = 8,
2452 .vta_regs = B53_VTA_REGS,
2453 .duplex_reg = B53_DUPLEX_STAT_GE,
2454 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2455 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2456 },
2457 {
2458 .chip_id = BCM63XX_DEVICE_ID,
2459 .dev_name = "BCM63xx",
2460 .vlans = 4096,
2461 .enabled_ports = 0, /* pdata must provide them */
2462 .arl_bins = 4,
2463 .arl_buckets = 1024,
2464 .imp_port = 8,
2465 .vta_regs = B53_VTA_REGS_63XX,
2466 .duplex_reg = B53_DUPLEX_STAT_63XX,
2467 .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
2468 .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
2469 },
2470 {
2471 .chip_id = BCM63268_DEVICE_ID,
2472 .dev_name = "BCM63268",
2473 .vlans = 4096,
2474 .enabled_ports = 0, /* pdata must provide them */
2475 .arl_bins = 4,
2476 .arl_buckets = 1024,
2477 .imp_port = 8,
2478 .vta_regs = B53_VTA_REGS_63XX,
2479 .duplex_reg = B53_DUPLEX_STAT_63XX,
2480 .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
2481 .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
2482 },
2483 {
2484 .chip_id = BCM53010_DEVICE_ID,
2485 .dev_name = "BCM53010",
2486 .vlans = 4096,
2487 .enabled_ports = 0x1bf,
2488 .arl_bins = 4,
2489 .arl_buckets = 1024,
2490 .imp_port = 8,
2491 .vta_regs = B53_VTA_REGS,
2492 .duplex_reg = B53_DUPLEX_STAT_GE,
2493 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2494 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2495 },
2496 {
2497 .chip_id = BCM53011_DEVICE_ID,
2498 .dev_name = "BCM53011",
2499 .vlans = 4096,
2500 .enabled_ports = 0x1bf,
2501 .arl_bins = 4,
2502 .arl_buckets = 1024,
2503 .imp_port = 8,
2504 .vta_regs = B53_VTA_REGS,
2505 .duplex_reg = B53_DUPLEX_STAT_GE,
2506 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2507 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2508 },
2509 {
2510 .chip_id = BCM53012_DEVICE_ID,
2511 .dev_name = "BCM53012",
2512 .vlans = 4096,
2513 .enabled_ports = 0x1bf,
2514 .arl_bins = 4,
2515 .arl_buckets = 1024,
2516 .imp_port = 8,
2517 .vta_regs = B53_VTA_REGS,
2518 .duplex_reg = B53_DUPLEX_STAT_GE,
2519 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2520 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2521 },
2522 {
2523 .chip_id = BCM53018_DEVICE_ID,
2524 .dev_name = "BCM53018",
2525 .vlans = 4096,
2526 .enabled_ports = 0x1bf,
2527 .arl_bins = 4,
2528 .arl_buckets = 1024,
2529 .imp_port = 8,
2530 .vta_regs = B53_VTA_REGS,
2531 .duplex_reg = B53_DUPLEX_STAT_GE,
2532 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2533 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2534 },
2535 {
2536 .chip_id = BCM53019_DEVICE_ID,
2537 .dev_name = "BCM53019",
2538 .vlans = 4096,
2539 .enabled_ports = 0x1bf,
2540 .arl_bins = 4,
2541 .arl_buckets = 1024,
2542 .imp_port = 8,
2543 .vta_regs = B53_VTA_REGS,
2544 .duplex_reg = B53_DUPLEX_STAT_GE,
2545 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2546 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2547 },
2548 {
2549 .chip_id = BCM58XX_DEVICE_ID,
2550 .dev_name = "BCM585xx/586xx/88312",
2551 .vlans = 4096,
2552 .enabled_ports = 0x1ff,
2553 .arl_bins = 4,
2554 .arl_buckets = 1024,
2555 .imp_port = 8,
2556 .vta_regs = B53_VTA_REGS,
2557 .duplex_reg = B53_DUPLEX_STAT_GE,
2558 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2559 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2560 },
2561 {
2562 .chip_id = BCM583XX_DEVICE_ID,
2563 .dev_name = "BCM583xx/11360",
2564 .vlans = 4096,
2565 .enabled_ports = 0x103,
2566 .arl_bins = 4,
2567 .arl_buckets = 1024,
2568 .imp_port = 8,
2569 .vta_regs = B53_VTA_REGS,
2570 .duplex_reg = B53_DUPLEX_STAT_GE,
2571 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2572 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2573 },
2574 /* Starfighter 2 */
2575 {
2576 .chip_id = BCM4908_DEVICE_ID,
2577 .dev_name = "BCM4908",
2578 .vlans = 4096,
2579 .enabled_ports = 0x1bf,
2580 .arl_bins = 4,
2581 .arl_buckets = 256,
2582 .imp_port = 8,
2583 .vta_regs = B53_VTA_REGS,
2584 .duplex_reg = B53_DUPLEX_STAT_GE,
2585 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2586 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2587 },
2588 {
2589 .chip_id = BCM7445_DEVICE_ID,
2590 .dev_name = "BCM7445",
2591 .vlans = 4096,
2592 .enabled_ports = 0x1ff,
2593 .arl_bins = 4,
2594 .arl_buckets = 1024,
2595 .imp_port = 8,
2596 .vta_regs = B53_VTA_REGS,
2597 .duplex_reg = B53_DUPLEX_STAT_GE,
2598 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2599 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2600 },
2601 {
2602 .chip_id = BCM7278_DEVICE_ID,
2603 .dev_name = "BCM7278",
2604 .vlans = 4096,
2605 .enabled_ports = 0x1ff,
2606 .arl_bins = 4,
2607 .arl_buckets = 256,
2608 .imp_port = 8,
2609 .vta_regs = B53_VTA_REGS,
2610 .duplex_reg = B53_DUPLEX_STAT_GE,
2611 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2612 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2613 },
2614 {
2615 .chip_id = BCM53134_DEVICE_ID,
2616 .dev_name = "BCM53134",
2617 .vlans = 4096,
2618 .enabled_ports = 0x12f,
2619 .imp_port = 8,
2620 .cpu_port = B53_CPU_PORT,
2621 .vta_regs = B53_VTA_REGS,
2622 .arl_bins = 4,
2623 .arl_buckets = 1024,
2624 .duplex_reg = B53_DUPLEX_STAT_GE,
2625 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2626 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2627 },
2628};
2629
2630static int b53_switch_init(struct b53_device *dev)
2631{
2632 unsigned int i;
2633 int ret;
2634
2635 for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
2636 const struct b53_chip_data *chip = &b53_switch_chips[i];
2637
2638 if (chip->chip_id == dev->chip_id) {
2639 if (!dev->enabled_ports)
2640 dev->enabled_ports = chip->enabled_ports;
2641 dev->name = chip->dev_name;
2642 dev->duplex_reg = chip->duplex_reg;
2643 dev->vta_regs[0] = chip->vta_regs[0];
2644 dev->vta_regs[1] = chip->vta_regs[1];
2645 dev->vta_regs[2] = chip->vta_regs[2];
2646 dev->jumbo_pm_reg = chip->jumbo_pm_reg;
2647 dev->imp_port = chip->imp_port;
2648 dev->num_vlans = chip->vlans;
2649 dev->num_arl_bins = chip->arl_bins;
2650 dev->num_arl_buckets = chip->arl_buckets;
2651 break;
2652 }
2653 }
2654
2655 /* check which BCM5325x version we have */
2656 if (is5325(dev)) {
2657 u8 vc4;
2658
2659 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
2660
2661 /* check reserved bits */
2662 switch (vc4 & 3) {
2663 case 1:
2664 /* BCM5325E */
2665 break;
2666 case 3:
2667 /* BCM5325F - do not use port 4 */
2668 dev->enabled_ports &= ~BIT(4);
2669 break;
2670 default:
2671/* On the BCM47XX SoCs this is the supported internal switch.*/
2672#ifndef CONFIG_BCM47XX
2673 /* BCM5325M */
2674 return -EINVAL;
2675#else
2676 break;
2677#endif
2678 }
2679 }
2680
2681 dev->num_ports = fls(dev->enabled_ports);
2682
2683 dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
2684
2685 /* Include non standard CPU port built-in PHYs to be probed */
2686 if (is539x(dev) || is531x5(dev)) {
2687 for (i = 0; i < dev->num_ports; i++) {
2688 if (!(dev->ds->phys_mii_mask & BIT(i)) &&
2689 !b53_possible_cpu_port(dev->ds, i))
2690 dev->ds->phys_mii_mask |= BIT(i);
2691 }
2692 }
2693
2694 dev->ports = devm_kcalloc(dev->dev,
2695 dev->num_ports, sizeof(struct b53_port),
2696 GFP_KERNEL);
2697 if (!dev->ports)
2698 return -ENOMEM;
2699
2700 dev->vlans = devm_kcalloc(dev->dev,
2701 dev->num_vlans, sizeof(struct b53_vlan),
2702 GFP_KERNEL);
2703 if (!dev->vlans)
2704 return -ENOMEM;
2705
2706 dev->reset_gpio = b53_switch_get_reset_gpio(dev);
2707 if (dev->reset_gpio >= 0) {
2708 ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
2709 GPIOF_OUT_INIT_HIGH, "robo_reset");
2710 if (ret)
2711 return ret;
2712 }
2713
2714 return 0;
2715}
2716
2717struct b53_device *b53_switch_alloc(struct device *base,
2718 const struct b53_io_ops *ops,
2719 void *priv)
2720{
2721 struct dsa_switch *ds;
2722 struct b53_device *dev;
2723
2724 ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
2725 if (!ds)
2726 return NULL;
2727
2728 ds->dev = base;
2729
2730 dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
2731 if (!dev)
2732 return NULL;
2733
2734 ds->priv = dev;
2735 dev->dev = base;
2736
2737 dev->ds = ds;
2738 dev->priv = priv;
2739 dev->ops = ops;
2740 ds->ops = &b53_switch_ops;
2741 ds->phylink_mac_ops = &b53_phylink_mac_ops;
2742 dev->vlan_enabled = true;
2743 /* Let DSA handle the case were multiple bridges span the same switch
2744 * device and different VLAN awareness settings are requested, which
2745 * would be breaking filtering semantics for any of the other bridge
2746 * devices. (not hardware supported)
2747 */
2748 ds->vlan_filtering_is_global = true;
2749
2750 mutex_init(&dev->reg_mutex);
2751 mutex_init(&dev->stats_mutex);
2752 mutex_init(&dev->arl_mutex);
2753
2754 return dev;
2755}
2756EXPORT_SYMBOL(b53_switch_alloc);
2757
2758int b53_switch_detect(struct b53_device *dev)
2759{
2760 u32 id32;
2761 u16 tmp;
2762 u8 id8;
2763 int ret;
2764
2765 ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
2766 if (ret)
2767 return ret;
2768
2769 switch (id8) {
2770 case 0:
2771 /* BCM5325 and BCM5365 do not have this register so reads
2772 * return 0. But the read operation did succeed, so assume this
2773 * is one of them.
2774 *
2775 * Next check if we can write to the 5325's VTA register; for
2776 * 5365 it is read only.
2777 */
2778 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
2779 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
2780
2781 if (tmp == 0xf)
2782 dev->chip_id = BCM5325_DEVICE_ID;
2783 else
2784 dev->chip_id = BCM5365_DEVICE_ID;
2785 break;
2786 case BCM5389_DEVICE_ID:
2787 case BCM5395_DEVICE_ID:
2788 case BCM5397_DEVICE_ID:
2789 case BCM5398_DEVICE_ID:
2790 dev->chip_id = id8;
2791 break;
2792 default:
2793 ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
2794 if (ret)
2795 return ret;
2796
2797 switch (id32) {
2798 case BCM53115_DEVICE_ID:
2799 case BCM53125_DEVICE_ID:
2800 case BCM53128_DEVICE_ID:
2801 case BCM53010_DEVICE_ID:
2802 case BCM53011_DEVICE_ID:
2803 case BCM53012_DEVICE_ID:
2804 case BCM53018_DEVICE_ID:
2805 case BCM53019_DEVICE_ID:
2806 case BCM53134_DEVICE_ID:
2807 dev->chip_id = id32;
2808 break;
2809 default:
2810 dev_err(dev->dev,
2811 "unsupported switch detected (BCM53%02x/BCM%x)\n",
2812 id8, id32);
2813 return -ENODEV;
2814 }
2815 }
2816
2817 if (dev->chip_id == BCM5325_DEVICE_ID)
2818 return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
2819 &dev->core_rev);
2820 else
2821 return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
2822 &dev->core_rev);
2823}
2824EXPORT_SYMBOL(b53_switch_detect);
2825
2826int b53_switch_register(struct b53_device *dev)
2827{
2828 int ret;
2829
2830 if (dev->pdata) {
2831 dev->chip_id = dev->pdata->chip_id;
2832 dev->enabled_ports = dev->pdata->enabled_ports;
2833 }
2834
2835 if (!dev->chip_id && b53_switch_detect(dev))
2836 return -EINVAL;
2837
2838 ret = b53_switch_init(dev);
2839 if (ret)
2840 return ret;
2841
2842 dev_info(dev->dev, "found switch: %s, rev %i\n",
2843 dev->name, dev->core_rev);
2844
2845 return dsa_register_switch(dev->ds);
2846}
2847EXPORT_SYMBOL(b53_switch_register);
2848
2849MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
2850MODULE_DESCRIPTION("B53 switch library");
2851MODULE_LICENSE("Dual BSD/GPL");
1/*
2 * B53 switch driver main logic
3 *
4 * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
5 * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
6 *
7 * Permission to use, copy, modify, and/or distribute this software for any
8 * purpose with or without fee is hereby granted, provided that the above
9 * copyright notice and this permission notice appear in all copies.
10 *
11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18 */
19
20#include <linux/delay.h>
21#include <linux/export.h>
22#include <linux/gpio.h>
23#include <linux/kernel.h>
24#include <linux/module.h>
25#include <linux/platform_data/b53.h>
26#include <linux/phy.h>
27#include <linux/phylink.h>
28#include <linux/etherdevice.h>
29#include <linux/if_bridge.h>
30#include <net/dsa.h>
31
32#include "b53_regs.h"
33#include "b53_priv.h"
34
35struct b53_mib_desc {
36 u8 size;
37 u8 offset;
38 const char *name;
39};
40
41/* BCM5365 MIB counters */
42static const struct b53_mib_desc b53_mibs_65[] = {
43 { 8, 0x00, "TxOctets" },
44 { 4, 0x08, "TxDropPkts" },
45 { 4, 0x10, "TxBroadcastPkts" },
46 { 4, 0x14, "TxMulticastPkts" },
47 { 4, 0x18, "TxUnicastPkts" },
48 { 4, 0x1c, "TxCollisions" },
49 { 4, 0x20, "TxSingleCollision" },
50 { 4, 0x24, "TxMultipleCollision" },
51 { 4, 0x28, "TxDeferredTransmit" },
52 { 4, 0x2c, "TxLateCollision" },
53 { 4, 0x30, "TxExcessiveCollision" },
54 { 4, 0x38, "TxPausePkts" },
55 { 8, 0x44, "RxOctets" },
56 { 4, 0x4c, "RxUndersizePkts" },
57 { 4, 0x50, "RxPausePkts" },
58 { 4, 0x54, "Pkts64Octets" },
59 { 4, 0x58, "Pkts65to127Octets" },
60 { 4, 0x5c, "Pkts128to255Octets" },
61 { 4, 0x60, "Pkts256to511Octets" },
62 { 4, 0x64, "Pkts512to1023Octets" },
63 { 4, 0x68, "Pkts1024to1522Octets" },
64 { 4, 0x6c, "RxOversizePkts" },
65 { 4, 0x70, "RxJabbers" },
66 { 4, 0x74, "RxAlignmentErrors" },
67 { 4, 0x78, "RxFCSErrors" },
68 { 8, 0x7c, "RxGoodOctets" },
69 { 4, 0x84, "RxDropPkts" },
70 { 4, 0x88, "RxUnicastPkts" },
71 { 4, 0x8c, "RxMulticastPkts" },
72 { 4, 0x90, "RxBroadcastPkts" },
73 { 4, 0x94, "RxSAChanges" },
74 { 4, 0x98, "RxFragments" },
75};
76
77#define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65)
78
79/* BCM63xx MIB counters */
80static const struct b53_mib_desc b53_mibs_63xx[] = {
81 { 8, 0x00, "TxOctets" },
82 { 4, 0x08, "TxDropPkts" },
83 { 4, 0x0c, "TxQoSPkts" },
84 { 4, 0x10, "TxBroadcastPkts" },
85 { 4, 0x14, "TxMulticastPkts" },
86 { 4, 0x18, "TxUnicastPkts" },
87 { 4, 0x1c, "TxCollisions" },
88 { 4, 0x20, "TxSingleCollision" },
89 { 4, 0x24, "TxMultipleCollision" },
90 { 4, 0x28, "TxDeferredTransmit" },
91 { 4, 0x2c, "TxLateCollision" },
92 { 4, 0x30, "TxExcessiveCollision" },
93 { 4, 0x38, "TxPausePkts" },
94 { 8, 0x3c, "TxQoSOctets" },
95 { 8, 0x44, "RxOctets" },
96 { 4, 0x4c, "RxUndersizePkts" },
97 { 4, 0x50, "RxPausePkts" },
98 { 4, 0x54, "Pkts64Octets" },
99 { 4, 0x58, "Pkts65to127Octets" },
100 { 4, 0x5c, "Pkts128to255Octets" },
101 { 4, 0x60, "Pkts256to511Octets" },
102 { 4, 0x64, "Pkts512to1023Octets" },
103 { 4, 0x68, "Pkts1024to1522Octets" },
104 { 4, 0x6c, "RxOversizePkts" },
105 { 4, 0x70, "RxJabbers" },
106 { 4, 0x74, "RxAlignmentErrors" },
107 { 4, 0x78, "RxFCSErrors" },
108 { 8, 0x7c, "RxGoodOctets" },
109 { 4, 0x84, "RxDropPkts" },
110 { 4, 0x88, "RxUnicastPkts" },
111 { 4, 0x8c, "RxMulticastPkts" },
112 { 4, 0x90, "RxBroadcastPkts" },
113 { 4, 0x94, "RxSAChanges" },
114 { 4, 0x98, "RxFragments" },
115 { 4, 0xa0, "RxSymbolErrors" },
116 { 4, 0xa4, "RxQoSPkts" },
117 { 8, 0xa8, "RxQoSOctets" },
118 { 4, 0xb0, "Pkts1523to2047Octets" },
119 { 4, 0xb4, "Pkts2048to4095Octets" },
120 { 4, 0xb8, "Pkts4096to8191Octets" },
121 { 4, 0xbc, "Pkts8192to9728Octets" },
122 { 4, 0xc0, "RxDiscarded" },
123};
124
125#define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx)
126
127/* MIB counters */
128static const struct b53_mib_desc b53_mibs[] = {
129 { 8, 0x00, "TxOctets" },
130 { 4, 0x08, "TxDropPkts" },
131 { 4, 0x10, "TxBroadcastPkts" },
132 { 4, 0x14, "TxMulticastPkts" },
133 { 4, 0x18, "TxUnicastPkts" },
134 { 4, 0x1c, "TxCollisions" },
135 { 4, 0x20, "TxSingleCollision" },
136 { 4, 0x24, "TxMultipleCollision" },
137 { 4, 0x28, "TxDeferredTransmit" },
138 { 4, 0x2c, "TxLateCollision" },
139 { 4, 0x30, "TxExcessiveCollision" },
140 { 4, 0x38, "TxPausePkts" },
141 { 8, 0x50, "RxOctets" },
142 { 4, 0x58, "RxUndersizePkts" },
143 { 4, 0x5c, "RxPausePkts" },
144 { 4, 0x60, "Pkts64Octets" },
145 { 4, 0x64, "Pkts65to127Octets" },
146 { 4, 0x68, "Pkts128to255Octets" },
147 { 4, 0x6c, "Pkts256to511Octets" },
148 { 4, 0x70, "Pkts512to1023Octets" },
149 { 4, 0x74, "Pkts1024to1522Octets" },
150 { 4, 0x78, "RxOversizePkts" },
151 { 4, 0x7c, "RxJabbers" },
152 { 4, 0x80, "RxAlignmentErrors" },
153 { 4, 0x84, "RxFCSErrors" },
154 { 8, 0x88, "RxGoodOctets" },
155 { 4, 0x90, "RxDropPkts" },
156 { 4, 0x94, "RxUnicastPkts" },
157 { 4, 0x98, "RxMulticastPkts" },
158 { 4, 0x9c, "RxBroadcastPkts" },
159 { 4, 0xa0, "RxSAChanges" },
160 { 4, 0xa4, "RxFragments" },
161 { 4, 0xa8, "RxJumboPkts" },
162 { 4, 0xac, "RxSymbolErrors" },
163 { 4, 0xc0, "RxDiscarded" },
164};
165
166#define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs)
167
168static const struct b53_mib_desc b53_mibs_58xx[] = {
169 { 8, 0x00, "TxOctets" },
170 { 4, 0x08, "TxDropPkts" },
171 { 4, 0x0c, "TxQPKTQ0" },
172 { 4, 0x10, "TxBroadcastPkts" },
173 { 4, 0x14, "TxMulticastPkts" },
174 { 4, 0x18, "TxUnicastPKts" },
175 { 4, 0x1c, "TxCollisions" },
176 { 4, 0x20, "TxSingleCollision" },
177 { 4, 0x24, "TxMultipleCollision" },
178 { 4, 0x28, "TxDeferredCollision" },
179 { 4, 0x2c, "TxLateCollision" },
180 { 4, 0x30, "TxExcessiveCollision" },
181 { 4, 0x34, "TxFrameInDisc" },
182 { 4, 0x38, "TxPausePkts" },
183 { 4, 0x3c, "TxQPKTQ1" },
184 { 4, 0x40, "TxQPKTQ2" },
185 { 4, 0x44, "TxQPKTQ3" },
186 { 4, 0x48, "TxQPKTQ4" },
187 { 4, 0x4c, "TxQPKTQ5" },
188 { 8, 0x50, "RxOctets" },
189 { 4, 0x58, "RxUndersizePkts" },
190 { 4, 0x5c, "RxPausePkts" },
191 { 4, 0x60, "RxPkts64Octets" },
192 { 4, 0x64, "RxPkts65to127Octets" },
193 { 4, 0x68, "RxPkts128to255Octets" },
194 { 4, 0x6c, "RxPkts256to511Octets" },
195 { 4, 0x70, "RxPkts512to1023Octets" },
196 { 4, 0x74, "RxPkts1024toMaxPktsOctets" },
197 { 4, 0x78, "RxOversizePkts" },
198 { 4, 0x7c, "RxJabbers" },
199 { 4, 0x80, "RxAlignmentErrors" },
200 { 4, 0x84, "RxFCSErrors" },
201 { 8, 0x88, "RxGoodOctets" },
202 { 4, 0x90, "RxDropPkts" },
203 { 4, 0x94, "RxUnicastPkts" },
204 { 4, 0x98, "RxMulticastPkts" },
205 { 4, 0x9c, "RxBroadcastPkts" },
206 { 4, 0xa0, "RxSAChanges" },
207 { 4, 0xa4, "RxFragments" },
208 { 4, 0xa8, "RxJumboPkt" },
209 { 4, 0xac, "RxSymblErr" },
210 { 4, 0xb0, "InRangeErrCount" },
211 { 4, 0xb4, "OutRangeErrCount" },
212 { 4, 0xb8, "EEELpiEvent" },
213 { 4, 0xbc, "EEELpiDuration" },
214 { 4, 0xc0, "RxDiscard" },
215 { 4, 0xc8, "TxQPKTQ6" },
216 { 4, 0xcc, "TxQPKTQ7" },
217 { 4, 0xd0, "TxPkts64Octets" },
218 { 4, 0xd4, "TxPkts65to127Octets" },
219 { 4, 0xd8, "TxPkts128to255Octets" },
220 { 4, 0xdc, "TxPkts256to511Ocets" },
221 { 4, 0xe0, "TxPkts512to1023Ocets" },
222 { 4, 0xe4, "TxPkts1024toMaxPktOcets" },
223};
224
225#define B53_MIBS_58XX_SIZE ARRAY_SIZE(b53_mibs_58xx)
226
227static int b53_do_vlan_op(struct b53_device *dev, u8 op)
228{
229 unsigned int i;
230
231 b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
232
233 for (i = 0; i < 10; i++) {
234 u8 vta;
235
236 b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
237 if (!(vta & VTA_START_CMD))
238 return 0;
239
240 usleep_range(100, 200);
241 }
242
243 return -EIO;
244}
245
246static void b53_set_vlan_entry(struct b53_device *dev, u16 vid,
247 struct b53_vlan *vlan)
248{
249 if (is5325(dev)) {
250 u32 entry = 0;
251
252 if (vlan->members) {
253 entry = ((vlan->untag & VA_UNTAG_MASK_25) <<
254 VA_UNTAG_S_25) | vlan->members;
255 if (dev->core_rev >= 3)
256 entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
257 else
258 entry |= VA_VALID_25;
259 }
260
261 b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
262 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
263 VTA_RW_STATE_WR | VTA_RW_OP_EN);
264 } else if (is5365(dev)) {
265 u16 entry = 0;
266
267 if (vlan->members)
268 entry = ((vlan->untag & VA_UNTAG_MASK_65) <<
269 VA_UNTAG_S_65) | vlan->members | VA_VALID_65;
270
271 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
272 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
273 VTA_RW_STATE_WR | VTA_RW_OP_EN);
274 } else {
275 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
276 b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
277 (vlan->untag << VTE_UNTAG_S) | vlan->members);
278
279 b53_do_vlan_op(dev, VTA_CMD_WRITE);
280 }
281
282 dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n",
283 vid, vlan->members, vlan->untag);
284}
285
286static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
287 struct b53_vlan *vlan)
288{
289 if (is5325(dev)) {
290 u32 entry = 0;
291
292 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
293 VTA_RW_STATE_RD | VTA_RW_OP_EN);
294 b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry);
295
296 if (dev->core_rev >= 3)
297 vlan->valid = !!(entry & VA_VALID_25_R4);
298 else
299 vlan->valid = !!(entry & VA_VALID_25);
300 vlan->members = entry & VA_MEMBER_MASK;
301 vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25;
302
303 } else if (is5365(dev)) {
304 u16 entry = 0;
305
306 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
307 VTA_RW_STATE_WR | VTA_RW_OP_EN);
308 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry);
309
310 vlan->valid = !!(entry & VA_VALID_65);
311 vlan->members = entry & VA_MEMBER_MASK;
312 vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65;
313 } else {
314 u32 entry = 0;
315
316 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
317 b53_do_vlan_op(dev, VTA_CMD_READ);
318 b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry);
319 vlan->members = entry & VTE_MEMBERS;
320 vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS;
321 vlan->valid = true;
322 }
323}
324
325static void b53_set_forwarding(struct b53_device *dev, int enable)
326{
327 u8 mgmt;
328
329 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
330
331 if (enable)
332 mgmt |= SM_SW_FWD_EN;
333 else
334 mgmt &= ~SM_SW_FWD_EN;
335
336 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
337
338 /* Include IMP port in dumb forwarding mode
339 */
340 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
341 mgmt |= B53_MII_DUMB_FWDG_EN;
342 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
343
344 /* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
345 * frames should be flooded or not.
346 */
347 b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
348 mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
349 b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
350}
351
352static void b53_enable_vlan(struct b53_device *dev, int port, bool enable,
353 bool enable_filtering)
354{
355 u8 mgmt, vc0, vc1, vc4 = 0, vc5;
356
357 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
358 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
359 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
360
361 if (is5325(dev) || is5365(dev)) {
362 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
363 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
364 } else if (is63xx(dev)) {
365 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
366 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
367 } else {
368 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
369 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
370 }
371
372 if (enable) {
373 vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
374 vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
375 vc4 &= ~VC4_ING_VID_CHECK_MASK;
376 if (enable_filtering) {
377 vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
378 vc5 |= VC5_DROP_VTABLE_MISS;
379 } else {
380 vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
381 vc5 &= ~VC5_DROP_VTABLE_MISS;
382 }
383
384 if (is5325(dev))
385 vc0 &= ~VC0_RESERVED_1;
386
387 if (is5325(dev) || is5365(dev))
388 vc1 |= VC1_RX_MCST_TAG_EN;
389
390 } else {
391 vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
392 vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
393 vc4 &= ~VC4_ING_VID_CHECK_MASK;
394 vc5 &= ~VC5_DROP_VTABLE_MISS;
395
396 if (is5325(dev) || is5365(dev))
397 vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
398 else
399 vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
400
401 if (is5325(dev) || is5365(dev))
402 vc1 &= ~VC1_RX_MCST_TAG_EN;
403 }
404
405 if (!is5325(dev) && !is5365(dev))
406 vc5 &= ~VC5_VID_FFF_EN;
407
408 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
409 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
410
411 if (is5325(dev) || is5365(dev)) {
412 /* enable the high 8 bit vid check on 5325 */
413 if (is5325(dev) && enable)
414 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
415 VC3_HIGH_8BIT_EN);
416 else
417 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
418
419 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
420 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
421 } else if (is63xx(dev)) {
422 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
423 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
424 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
425 } else {
426 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
427 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
428 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
429 }
430
431 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
432
433 dev->vlan_enabled = enable;
434
435 dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n",
436 port, enable, enable_filtering);
437}
438
439static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
440{
441 u32 port_mask = 0;
442 u16 max_size = JMS_MIN_SIZE;
443
444 if (is5325(dev) || is5365(dev))
445 return -EINVAL;
446
447 if (enable) {
448 port_mask = dev->enabled_ports;
449 max_size = JMS_MAX_SIZE;
450 if (allow_10_100)
451 port_mask |= JPM_10_100_JUMBO_EN;
452 }
453
454 b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
455 return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
456}
457
458static int b53_flush_arl(struct b53_device *dev, u8 mask)
459{
460 unsigned int i;
461
462 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
463 FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
464
465 for (i = 0; i < 10; i++) {
466 u8 fast_age_ctrl;
467
468 b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
469 &fast_age_ctrl);
470
471 if (!(fast_age_ctrl & FAST_AGE_DONE))
472 goto out;
473
474 msleep(1);
475 }
476
477 return -ETIMEDOUT;
478out:
479 /* Only age dynamic entries (default behavior) */
480 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
481 return 0;
482}
483
484static int b53_fast_age_port(struct b53_device *dev, int port)
485{
486 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
487
488 return b53_flush_arl(dev, FAST_AGE_PORT);
489}
490
491static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
492{
493 b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
494
495 return b53_flush_arl(dev, FAST_AGE_VLAN);
496}
497
498void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
499{
500 struct b53_device *dev = ds->priv;
501 unsigned int i;
502 u16 pvlan;
503
504 /* Enable the IMP port to be in the same VLAN as the other ports
505 * on a per-port basis such that we only have Port i and IMP in
506 * the same VLAN.
507 */
508 b53_for_each_port(dev, i) {
509 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan);
510 pvlan |= BIT(cpu_port);
511 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
512 }
513}
514EXPORT_SYMBOL(b53_imp_vlan_setup);
515
516static void b53_port_set_ucast_flood(struct b53_device *dev, int port,
517 bool unicast)
518{
519 u16 uc;
520
521 b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
522 if (unicast)
523 uc |= BIT(port);
524 else
525 uc &= ~BIT(port);
526 b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
527}
528
529static void b53_port_set_mcast_flood(struct b53_device *dev, int port,
530 bool multicast)
531{
532 u16 mc;
533
534 b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
535 if (multicast)
536 mc |= BIT(port);
537 else
538 mc &= ~BIT(port);
539 b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
540
541 b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
542 if (multicast)
543 mc |= BIT(port);
544 else
545 mc &= ~BIT(port);
546 b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
547}
548
549static void b53_port_set_learning(struct b53_device *dev, int port,
550 bool learning)
551{
552 u16 reg;
553
554 b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, ®);
555 if (learning)
556 reg &= ~BIT(port);
557 else
558 reg |= BIT(port);
559 b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg);
560}
561
562int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
563{
564 struct b53_device *dev = ds->priv;
565 unsigned int cpu_port;
566 int ret = 0;
567 u16 pvlan;
568
569 if (!dsa_is_user_port(ds, port))
570 return 0;
571
572 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
573
574 b53_port_set_ucast_flood(dev, port, true);
575 b53_port_set_mcast_flood(dev, port, true);
576 b53_port_set_learning(dev, port, false);
577
578 if (dev->ops->irq_enable)
579 ret = dev->ops->irq_enable(dev, port);
580 if (ret)
581 return ret;
582
583 /* Clear the Rx and Tx disable bits and set to no spanning tree */
584 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
585
586 /* Set this port, and only this one to be in the default VLAN,
587 * if member of a bridge, restore its membership prior to
588 * bringing down this port.
589 */
590 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
591 pvlan &= ~0x1ff;
592 pvlan |= BIT(port);
593 pvlan |= dev->ports[port].vlan_ctl_mask;
594 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
595
596 b53_imp_vlan_setup(ds, cpu_port);
597
598 /* If EEE was enabled, restore it */
599 if (dev->ports[port].eee.eee_enabled)
600 b53_eee_enable_set(ds, port, true);
601
602 return 0;
603}
604EXPORT_SYMBOL(b53_enable_port);
605
606void b53_disable_port(struct dsa_switch *ds, int port)
607{
608 struct b53_device *dev = ds->priv;
609 u8 reg;
610
611 /* Disable Tx/Rx for the port */
612 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®);
613 reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
614 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
615
616 if (dev->ops->irq_disable)
617 dev->ops->irq_disable(dev, port);
618}
619EXPORT_SYMBOL(b53_disable_port);
620
621void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
622{
623 struct b53_device *dev = ds->priv;
624 bool tag_en = !(dev->tag_protocol == DSA_TAG_PROTO_NONE);
625 u8 hdr_ctl, val;
626 u16 reg;
627
628 /* Resolve which bit controls the Broadcom tag */
629 switch (port) {
630 case 8:
631 val = BRCM_HDR_P8_EN;
632 break;
633 case 7:
634 val = BRCM_HDR_P7_EN;
635 break;
636 case 5:
637 val = BRCM_HDR_P5_EN;
638 break;
639 default:
640 val = 0;
641 break;
642 }
643
644 /* Enable management mode if tagging is requested */
645 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &hdr_ctl);
646 if (tag_en)
647 hdr_ctl |= SM_SW_FWD_MODE;
648 else
649 hdr_ctl &= ~SM_SW_FWD_MODE;
650 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, hdr_ctl);
651
652 /* Configure the appropriate IMP port */
653 b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &hdr_ctl);
654 if (port == 8)
655 hdr_ctl |= GC_FRM_MGMT_PORT_MII;
656 else if (port == 5)
657 hdr_ctl |= GC_FRM_MGMT_PORT_M;
658 b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl);
659
660 /* Enable Broadcom tags for IMP port */
661 b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
662 if (tag_en)
663 hdr_ctl |= val;
664 else
665 hdr_ctl &= ~val;
666 b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
667
668 /* Registers below are only accessible on newer devices */
669 if (!is58xx(dev))
670 return;
671
672 /* Enable reception Broadcom tag for CPU TX (switch RX) to
673 * allow us to tag outgoing frames
674 */
675 b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, ®);
676 if (tag_en)
677 reg &= ~BIT(port);
678 else
679 reg |= BIT(port);
680 b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
681
682 /* Enable transmission of Broadcom tags from the switch (CPU RX) to
683 * allow delivering frames to the per-port net_devices
684 */
685 b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, ®);
686 if (tag_en)
687 reg &= ~BIT(port);
688 else
689 reg |= BIT(port);
690 b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
691}
692EXPORT_SYMBOL(b53_brcm_hdr_setup);
693
694static void b53_enable_cpu_port(struct b53_device *dev, int port)
695{
696 u8 port_ctrl;
697
698 /* BCM5325 CPU port is at 8 */
699 if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
700 port = B53_CPU_PORT;
701
702 port_ctrl = PORT_CTRL_RX_BCST_EN |
703 PORT_CTRL_RX_MCST_EN |
704 PORT_CTRL_RX_UCST_EN;
705 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
706
707 b53_brcm_hdr_setup(dev->ds, port);
708
709 b53_port_set_ucast_flood(dev, port, true);
710 b53_port_set_mcast_flood(dev, port, true);
711 b53_port_set_learning(dev, port, false);
712}
713
714static void b53_enable_mib(struct b53_device *dev)
715{
716 u8 gc;
717
718 b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
719 gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
720 b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
721}
722
723static u16 b53_default_pvid(struct b53_device *dev)
724{
725 if (is5325(dev) || is5365(dev))
726 return 1;
727 else
728 return 0;
729}
730
731static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
732{
733 struct b53_device *dev = ds->priv;
734
735 return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
736}
737
738int b53_configure_vlan(struct dsa_switch *ds)
739{
740 struct b53_device *dev = ds->priv;
741 struct b53_vlan vl = { 0 };
742 struct b53_vlan *v;
743 int i, def_vid;
744 u16 vid;
745
746 def_vid = b53_default_pvid(dev);
747
748 /* clear all vlan entries */
749 if (is5325(dev) || is5365(dev)) {
750 for (i = def_vid; i < dev->num_vlans; i++)
751 b53_set_vlan_entry(dev, i, &vl);
752 } else {
753 b53_do_vlan_op(dev, VTA_CMD_CLEAR);
754 }
755
756 b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering);
757
758 /* Create an untagged VLAN entry for the default PVID in case
759 * CONFIG_VLAN_8021Q is disabled and there are no calls to
760 * dsa_slave_vlan_rx_add_vid() to create the default VLAN
761 * entry. Do this only when the tagging protocol is not
762 * DSA_TAG_PROTO_NONE
763 */
764 b53_for_each_port(dev, i) {
765 v = &dev->vlans[def_vid];
766 v->members |= BIT(i);
767 if (!b53_vlan_port_needs_forced_tagged(ds, i))
768 v->untag = v->members;
769 b53_write16(dev, B53_VLAN_PAGE,
770 B53_VLAN_PORT_DEF_TAG(i), def_vid);
771 }
772
773 /* Upon initial call we have not set-up any VLANs, but upon
774 * system resume, we need to restore all VLAN entries.
775 */
776 for (vid = def_vid; vid < dev->num_vlans; vid++) {
777 v = &dev->vlans[vid];
778
779 if (!v->members)
780 continue;
781
782 b53_set_vlan_entry(dev, vid, v);
783 b53_fast_age_vlan(dev, vid);
784 }
785
786 return 0;
787}
788EXPORT_SYMBOL(b53_configure_vlan);
789
790static void b53_switch_reset_gpio(struct b53_device *dev)
791{
792 int gpio = dev->reset_gpio;
793
794 if (gpio < 0)
795 return;
796
797 /* Reset sequence: RESET low(50ms)->high(20ms)
798 */
799 gpio_set_value(gpio, 0);
800 mdelay(50);
801
802 gpio_set_value(gpio, 1);
803 mdelay(20);
804
805 dev->current_page = 0xff;
806}
807
808static int b53_switch_reset(struct b53_device *dev)
809{
810 unsigned int timeout = 1000;
811 u8 mgmt, reg;
812
813 b53_switch_reset_gpio(dev);
814
815 if (is539x(dev)) {
816 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
817 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
818 }
819
820 /* This is specific to 58xx devices here, do not use is58xx() which
821 * covers the larger Starfigther 2 family, including 7445/7278 which
822 * still use this driver as a library and need to perform the reset
823 * earlier.
824 */
825 if (dev->chip_id == BCM58XX_DEVICE_ID ||
826 dev->chip_id == BCM583XX_DEVICE_ID) {
827 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
828 reg |= SW_RST | EN_SW_RST | EN_CH_RST;
829 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
830
831 do {
832 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
833 if (!(reg & SW_RST))
834 break;
835
836 usleep_range(1000, 2000);
837 } while (timeout-- > 0);
838
839 if (timeout == 0) {
840 dev_err(dev->dev,
841 "Timeout waiting for SW_RST to clear!\n");
842 return -ETIMEDOUT;
843 }
844 }
845
846 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
847
848 if (!(mgmt & SM_SW_FWD_EN)) {
849 mgmt &= ~SM_SW_FWD_MODE;
850 mgmt |= SM_SW_FWD_EN;
851
852 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
853 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
854
855 if (!(mgmt & SM_SW_FWD_EN)) {
856 dev_err(dev->dev, "Failed to enable switch!\n");
857 return -EINVAL;
858 }
859 }
860
861 b53_enable_mib(dev);
862
863 return b53_flush_arl(dev, FAST_AGE_STATIC);
864}
865
866static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
867{
868 struct b53_device *priv = ds->priv;
869 u16 value = 0;
870 int ret;
871
872 if (priv->ops->phy_read16)
873 ret = priv->ops->phy_read16(priv, addr, reg, &value);
874 else
875 ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
876 reg * 2, &value);
877
878 return ret ? ret : value;
879}
880
881static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
882{
883 struct b53_device *priv = ds->priv;
884
885 if (priv->ops->phy_write16)
886 return priv->ops->phy_write16(priv, addr, reg, val);
887
888 return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
889}
890
891static int b53_reset_switch(struct b53_device *priv)
892{
893 /* reset vlans */
894 memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
895 memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
896
897 priv->serdes_lane = B53_INVALID_LANE;
898
899 return b53_switch_reset(priv);
900}
901
902static int b53_apply_config(struct b53_device *priv)
903{
904 /* disable switching */
905 b53_set_forwarding(priv, 0);
906
907 b53_configure_vlan(priv->ds);
908
909 /* enable switching */
910 b53_set_forwarding(priv, 1);
911
912 return 0;
913}
914
915static void b53_reset_mib(struct b53_device *priv)
916{
917 u8 gc;
918
919 b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
920
921 b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
922 msleep(1);
923 b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
924 msleep(1);
925}
926
927static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
928{
929 if (is5365(dev))
930 return b53_mibs_65;
931 else if (is63xx(dev))
932 return b53_mibs_63xx;
933 else if (is58xx(dev))
934 return b53_mibs_58xx;
935 else
936 return b53_mibs;
937}
938
939static unsigned int b53_get_mib_size(struct b53_device *dev)
940{
941 if (is5365(dev))
942 return B53_MIBS_65_SIZE;
943 else if (is63xx(dev))
944 return B53_MIBS_63XX_SIZE;
945 else if (is58xx(dev))
946 return B53_MIBS_58XX_SIZE;
947 else
948 return B53_MIBS_SIZE;
949}
950
951static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port)
952{
953 /* These ports typically do not have built-in PHYs */
954 switch (port) {
955 case B53_CPU_PORT_25:
956 case 7:
957 case B53_CPU_PORT:
958 return NULL;
959 }
960
961 return mdiobus_get_phy(ds->slave_mii_bus, port);
962}
963
964void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
965 uint8_t *data)
966{
967 struct b53_device *dev = ds->priv;
968 const struct b53_mib_desc *mibs = b53_get_mib(dev);
969 unsigned int mib_size = b53_get_mib_size(dev);
970 struct phy_device *phydev;
971 unsigned int i;
972
973 if (stringset == ETH_SS_STATS) {
974 for (i = 0; i < mib_size; i++)
975 strscpy(data + i * ETH_GSTRING_LEN,
976 mibs[i].name, ETH_GSTRING_LEN);
977 } else if (stringset == ETH_SS_PHY_STATS) {
978 phydev = b53_get_phy_device(ds, port);
979 if (!phydev)
980 return;
981
982 phy_ethtool_get_strings(phydev, data);
983 }
984}
985EXPORT_SYMBOL(b53_get_strings);
986
987void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
988{
989 struct b53_device *dev = ds->priv;
990 const struct b53_mib_desc *mibs = b53_get_mib(dev);
991 unsigned int mib_size = b53_get_mib_size(dev);
992 const struct b53_mib_desc *s;
993 unsigned int i;
994 u64 val = 0;
995
996 if (is5365(dev) && port == 5)
997 port = 8;
998
999 mutex_lock(&dev->stats_mutex);
1000
1001 for (i = 0; i < mib_size; i++) {
1002 s = &mibs[i];
1003
1004 if (s->size == 8) {
1005 b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
1006 } else {
1007 u32 val32;
1008
1009 b53_read32(dev, B53_MIB_PAGE(port), s->offset,
1010 &val32);
1011 val = val32;
1012 }
1013 data[i] = (u64)val;
1014 }
1015
1016 mutex_unlock(&dev->stats_mutex);
1017}
1018EXPORT_SYMBOL(b53_get_ethtool_stats);
1019
1020void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data)
1021{
1022 struct phy_device *phydev;
1023
1024 phydev = b53_get_phy_device(ds, port);
1025 if (!phydev)
1026 return;
1027
1028 phy_ethtool_get_stats(phydev, NULL, data);
1029}
1030EXPORT_SYMBOL(b53_get_ethtool_phy_stats);
1031
1032int b53_get_sset_count(struct dsa_switch *ds, int port, int sset)
1033{
1034 struct b53_device *dev = ds->priv;
1035 struct phy_device *phydev;
1036
1037 if (sset == ETH_SS_STATS) {
1038 return b53_get_mib_size(dev);
1039 } else if (sset == ETH_SS_PHY_STATS) {
1040 phydev = b53_get_phy_device(ds, port);
1041 if (!phydev)
1042 return 0;
1043
1044 return phy_ethtool_get_sset_count(phydev);
1045 }
1046
1047 return 0;
1048}
1049EXPORT_SYMBOL(b53_get_sset_count);
1050
1051enum b53_devlink_resource_id {
1052 B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1053};
1054
1055static u64 b53_devlink_vlan_table_get(void *priv)
1056{
1057 struct b53_device *dev = priv;
1058 struct b53_vlan *vl;
1059 unsigned int i;
1060 u64 count = 0;
1061
1062 for (i = 0; i < dev->num_vlans; i++) {
1063 vl = &dev->vlans[i];
1064 if (vl->members)
1065 count++;
1066 }
1067
1068 return count;
1069}
1070
1071int b53_setup_devlink_resources(struct dsa_switch *ds)
1072{
1073 struct devlink_resource_size_params size_params;
1074 struct b53_device *dev = ds->priv;
1075 int err;
1076
1077 devlink_resource_size_params_init(&size_params, dev->num_vlans,
1078 dev->num_vlans,
1079 1, DEVLINK_RESOURCE_UNIT_ENTRY);
1080
1081 err = dsa_devlink_resource_register(ds, "VLAN", dev->num_vlans,
1082 B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1083 DEVLINK_RESOURCE_ID_PARENT_TOP,
1084 &size_params);
1085 if (err)
1086 goto out;
1087
1088 dsa_devlink_resource_occ_get_register(ds,
1089 B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1090 b53_devlink_vlan_table_get, dev);
1091
1092 return 0;
1093out:
1094 dsa_devlink_resources_unregister(ds);
1095 return err;
1096}
1097EXPORT_SYMBOL(b53_setup_devlink_resources);
1098
1099static int b53_setup(struct dsa_switch *ds)
1100{
1101 struct b53_device *dev = ds->priv;
1102 unsigned int port;
1103 int ret;
1104
1105 /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set
1106 * which forces the CPU port to be tagged in all VLANs.
1107 */
1108 ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE;
1109
1110 ret = b53_reset_switch(dev);
1111 if (ret) {
1112 dev_err(ds->dev, "failed to reset switch\n");
1113 return ret;
1114 }
1115
1116 b53_reset_mib(dev);
1117
1118 ret = b53_apply_config(dev);
1119 if (ret) {
1120 dev_err(ds->dev, "failed to apply configuration\n");
1121 return ret;
1122 }
1123
1124 /* Configure IMP/CPU port, disable all other ports. Enabled
1125 * ports will be configured with .port_enable
1126 */
1127 for (port = 0; port < dev->num_ports; port++) {
1128 if (dsa_is_cpu_port(ds, port))
1129 b53_enable_cpu_port(dev, port);
1130 else
1131 b53_disable_port(ds, port);
1132 }
1133
1134 return b53_setup_devlink_resources(ds);
1135}
1136
1137static void b53_teardown(struct dsa_switch *ds)
1138{
1139 dsa_devlink_resources_unregister(ds);
1140}
1141
1142static void b53_force_link(struct b53_device *dev, int port, int link)
1143{
1144 u8 reg, val, off;
1145
1146 /* Override the port settings */
1147 if (port == dev->imp_port) {
1148 off = B53_PORT_OVERRIDE_CTRL;
1149 val = PORT_OVERRIDE_EN;
1150 } else {
1151 off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1152 val = GMII_PO_EN;
1153 }
1154
1155 b53_read8(dev, B53_CTRL_PAGE, off, ®);
1156 reg |= val;
1157 if (link)
1158 reg |= PORT_OVERRIDE_LINK;
1159 else
1160 reg &= ~PORT_OVERRIDE_LINK;
1161 b53_write8(dev, B53_CTRL_PAGE, off, reg);
1162}
1163
1164static void b53_force_port_config(struct b53_device *dev, int port,
1165 int speed, int duplex,
1166 bool tx_pause, bool rx_pause)
1167{
1168 u8 reg, val, off;
1169
1170 /* Override the port settings */
1171 if (port == dev->imp_port) {
1172 off = B53_PORT_OVERRIDE_CTRL;
1173 val = PORT_OVERRIDE_EN;
1174 } else {
1175 off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1176 val = GMII_PO_EN;
1177 }
1178
1179 b53_read8(dev, B53_CTRL_PAGE, off, ®);
1180 reg |= val;
1181 if (duplex == DUPLEX_FULL)
1182 reg |= PORT_OVERRIDE_FULL_DUPLEX;
1183 else
1184 reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
1185
1186 switch (speed) {
1187 case 2000:
1188 reg |= PORT_OVERRIDE_SPEED_2000M;
1189 fallthrough;
1190 case SPEED_1000:
1191 reg |= PORT_OVERRIDE_SPEED_1000M;
1192 break;
1193 case SPEED_100:
1194 reg |= PORT_OVERRIDE_SPEED_100M;
1195 break;
1196 case SPEED_10:
1197 reg |= PORT_OVERRIDE_SPEED_10M;
1198 break;
1199 default:
1200 dev_err(dev->dev, "unknown speed: %d\n", speed);
1201 return;
1202 }
1203
1204 if (rx_pause)
1205 reg |= PORT_OVERRIDE_RX_FLOW;
1206 if (tx_pause)
1207 reg |= PORT_OVERRIDE_TX_FLOW;
1208
1209 b53_write8(dev, B53_CTRL_PAGE, off, reg);
1210}
1211
1212static void b53_adjust_link(struct dsa_switch *ds, int port,
1213 struct phy_device *phydev)
1214{
1215 struct b53_device *dev = ds->priv;
1216 struct ethtool_eee *p = &dev->ports[port].eee;
1217 u8 rgmii_ctrl = 0, reg = 0, off;
1218 bool tx_pause = false;
1219 bool rx_pause = false;
1220
1221 if (!phy_is_pseudo_fixed_link(phydev))
1222 return;
1223
1224 /* Enable flow control on BCM5301x's CPU port */
1225 if (is5301x(dev) && dsa_is_cpu_port(ds, port))
1226 tx_pause = rx_pause = true;
1227
1228 if (phydev->pause) {
1229 if (phydev->asym_pause)
1230 tx_pause = true;
1231 rx_pause = true;
1232 }
1233
1234 b53_force_port_config(dev, port, phydev->speed, phydev->duplex,
1235 tx_pause, rx_pause);
1236 b53_force_link(dev, port, phydev->link);
1237
1238 if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
1239 if (port == dev->imp_port)
1240 off = B53_RGMII_CTRL_IMP;
1241 else
1242 off = B53_RGMII_CTRL_P(port);
1243
1244 /* Configure the port RGMII clock delay by DLL disabled and
1245 * tx_clk aligned timing (restoring to reset defaults)
1246 */
1247 b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
1248 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
1249 RGMII_CTRL_TIMING_SEL);
1250
1251 /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
1252 * sure that we enable the port TX clock internal delay to
1253 * account for this internal delay that is inserted, otherwise
1254 * the switch won't be able to receive correctly.
1255 *
1256 * PHY_INTERFACE_MODE_RGMII means that we are not introducing
1257 * any delay neither on transmission nor reception, so the
1258 * BCM53125 must also be configured accordingly to account for
1259 * the lack of delay and introduce
1260 *
1261 * The BCM53125 switch has its RX clock and TX clock control
1262 * swapped, hence the reason why we modify the TX clock path in
1263 * the "RGMII" case
1264 */
1265 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
1266 rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
1267 if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
1268 rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
1269 rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
1270 b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
1271
1272 dev_info(ds->dev, "Configured port %d for %s\n", port,
1273 phy_modes(phydev->interface));
1274 }
1275
1276 /* configure MII port if necessary */
1277 if (is5325(dev)) {
1278 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1279 ®);
1280
1281 /* reverse mii needs to be enabled */
1282 if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1283 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1284 reg | PORT_OVERRIDE_RV_MII_25);
1285 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1286 ®);
1287
1288 if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1289 dev_err(ds->dev,
1290 "Failed to enable reverse MII mode\n");
1291 return;
1292 }
1293 }
1294 }
1295
1296 /* Re-negotiate EEE if it was enabled already */
1297 p->eee_enabled = b53_eee_init(ds, port, phydev);
1298}
1299
1300void b53_port_event(struct dsa_switch *ds, int port)
1301{
1302 struct b53_device *dev = ds->priv;
1303 bool link;
1304 u16 sts;
1305
1306 b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts);
1307 link = !!(sts & BIT(port));
1308 dsa_port_phylink_mac_change(ds, port, link);
1309}
1310EXPORT_SYMBOL(b53_port_event);
1311
1312static void b53_phylink_get_caps(struct dsa_switch *ds, int port,
1313 struct phylink_config *config)
1314{
1315 struct b53_device *dev = ds->priv;
1316
1317 /* Internal ports need GMII for PHYLIB */
1318 __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces);
1319
1320 /* These switches appear to support MII and RevMII too, but beyond
1321 * this, the code gives very few clues. FIXME: We probably need more
1322 * interface modes here.
1323 *
1324 * According to b53_srab_mux_init(), ports 3..5 can support:
1325 * SGMII, MII, GMII, RGMII or INTERNAL depending on the MUX setting.
1326 * However, the interface mode read from the MUX configuration is
1327 * not passed back to DSA, so phylink uses NA.
1328 * DT can specify RGMII for ports 0, 1.
1329 * For MDIO, port 8 can be RGMII_TXID.
1330 */
1331 __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
1332 __set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces);
1333
1334 config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
1335 MAC_10 | MAC_100;
1336
1337 /* 5325/5365 are not capable of gigabit speeds, everything else is.
1338 * Note: the original code also exclulded Gigagbit for MII, RevMII
1339 * and 802.3z modes. MII and RevMII are not able to work above 100M,
1340 * so will be excluded by the generic validator implementation.
1341 * However, the exclusion of Gigabit for 802.3z just seems wrong.
1342 */
1343 if (!(is5325(dev) || is5365(dev)))
1344 config->mac_capabilities |= MAC_1000;
1345
1346 /* Get the implementation specific capabilities */
1347 if (dev->ops->phylink_get_caps)
1348 dev->ops->phylink_get_caps(dev, port, config);
1349
1350 /* This driver does not make use of the speed, duplex, pause or the
1351 * advertisement in its mac_config, so it is safe to mark this driver
1352 * as non-legacy.
1353 */
1354 config->legacy_pre_march2020 = false;
1355}
1356
1357static struct phylink_pcs *b53_phylink_mac_select_pcs(struct dsa_switch *ds,
1358 int port,
1359 phy_interface_t interface)
1360{
1361 struct b53_device *dev = ds->priv;
1362
1363 if (!dev->ops->phylink_mac_select_pcs)
1364 return NULL;
1365
1366 return dev->ops->phylink_mac_select_pcs(dev, port, interface);
1367}
1368
1369void b53_phylink_mac_config(struct dsa_switch *ds, int port,
1370 unsigned int mode,
1371 const struct phylink_link_state *state)
1372{
1373}
1374EXPORT_SYMBOL(b53_phylink_mac_config);
1375
1376void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
1377 unsigned int mode,
1378 phy_interface_t interface)
1379{
1380 struct b53_device *dev = ds->priv;
1381
1382 if (mode == MLO_AN_PHY)
1383 return;
1384
1385 if (mode == MLO_AN_FIXED) {
1386 b53_force_link(dev, port, false);
1387 return;
1388 }
1389
1390 if (phy_interface_mode_is_8023z(interface) &&
1391 dev->ops->serdes_link_set)
1392 dev->ops->serdes_link_set(dev, port, mode, interface, false);
1393}
1394EXPORT_SYMBOL(b53_phylink_mac_link_down);
1395
1396void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
1397 unsigned int mode,
1398 phy_interface_t interface,
1399 struct phy_device *phydev,
1400 int speed, int duplex,
1401 bool tx_pause, bool rx_pause)
1402{
1403 struct b53_device *dev = ds->priv;
1404
1405 if (mode == MLO_AN_PHY)
1406 return;
1407
1408 if (mode == MLO_AN_FIXED) {
1409 b53_force_port_config(dev, port, speed, duplex,
1410 tx_pause, rx_pause);
1411 b53_force_link(dev, port, true);
1412 return;
1413 }
1414
1415 if (phy_interface_mode_is_8023z(interface) &&
1416 dev->ops->serdes_link_set)
1417 dev->ops->serdes_link_set(dev, port, mode, interface, true);
1418}
1419EXPORT_SYMBOL(b53_phylink_mac_link_up);
1420
1421int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
1422 struct netlink_ext_ack *extack)
1423{
1424 struct b53_device *dev = ds->priv;
1425
1426 b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering);
1427
1428 return 0;
1429}
1430EXPORT_SYMBOL(b53_vlan_filtering);
1431
1432static int b53_vlan_prepare(struct dsa_switch *ds, int port,
1433 const struct switchdev_obj_port_vlan *vlan)
1434{
1435 struct b53_device *dev = ds->priv;
1436
1437 if ((is5325(dev) || is5365(dev)) && vlan->vid == 0)
1438 return -EOPNOTSUPP;
1439
1440 /* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of
1441 * receiving VLAN tagged frames at all, we can still allow the port to
1442 * be configured for egress untagged.
1443 */
1444 if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 &&
1445 !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED))
1446 return -EINVAL;
1447
1448 if (vlan->vid >= dev->num_vlans)
1449 return -ERANGE;
1450
1451 b53_enable_vlan(dev, port, true, ds->vlan_filtering);
1452
1453 return 0;
1454}
1455
1456int b53_vlan_add(struct dsa_switch *ds, int port,
1457 const struct switchdev_obj_port_vlan *vlan,
1458 struct netlink_ext_ack *extack)
1459{
1460 struct b53_device *dev = ds->priv;
1461 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1462 bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
1463 struct b53_vlan *vl;
1464 int err;
1465
1466 err = b53_vlan_prepare(ds, port, vlan);
1467 if (err)
1468 return err;
1469
1470 vl = &dev->vlans[vlan->vid];
1471
1472 b53_get_vlan_entry(dev, vlan->vid, vl);
1473
1474 if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev))
1475 untagged = true;
1476
1477 vl->members |= BIT(port);
1478 if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
1479 vl->untag |= BIT(port);
1480 else
1481 vl->untag &= ~BIT(port);
1482
1483 b53_set_vlan_entry(dev, vlan->vid, vl);
1484 b53_fast_age_vlan(dev, vlan->vid);
1485
1486 if (pvid && !dsa_is_cpu_port(ds, port)) {
1487 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
1488 vlan->vid);
1489 b53_fast_age_vlan(dev, vlan->vid);
1490 }
1491
1492 return 0;
1493}
1494EXPORT_SYMBOL(b53_vlan_add);
1495
1496int b53_vlan_del(struct dsa_switch *ds, int port,
1497 const struct switchdev_obj_port_vlan *vlan)
1498{
1499 struct b53_device *dev = ds->priv;
1500 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1501 struct b53_vlan *vl;
1502 u16 pvid;
1503
1504 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
1505
1506 vl = &dev->vlans[vlan->vid];
1507
1508 b53_get_vlan_entry(dev, vlan->vid, vl);
1509
1510 vl->members &= ~BIT(port);
1511
1512 if (pvid == vlan->vid)
1513 pvid = b53_default_pvid(dev);
1514
1515 if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
1516 vl->untag &= ~(BIT(port));
1517
1518 b53_set_vlan_entry(dev, vlan->vid, vl);
1519 b53_fast_age_vlan(dev, vlan->vid);
1520
1521 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
1522 b53_fast_age_vlan(dev, pvid);
1523
1524 return 0;
1525}
1526EXPORT_SYMBOL(b53_vlan_del);
1527
1528/* Address Resolution Logic routines. Caller must hold &dev->arl_mutex. */
1529static int b53_arl_op_wait(struct b53_device *dev)
1530{
1531 unsigned int timeout = 10;
1532 u8 reg;
1533
1534 do {
1535 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®);
1536 if (!(reg & ARLTBL_START_DONE))
1537 return 0;
1538
1539 usleep_range(1000, 2000);
1540 } while (timeout--);
1541
1542 dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
1543
1544 return -ETIMEDOUT;
1545}
1546
1547static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
1548{
1549 u8 reg;
1550
1551 if (op > ARLTBL_RW)
1552 return -EINVAL;
1553
1554 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®);
1555 reg |= ARLTBL_START_DONE;
1556 if (op)
1557 reg |= ARLTBL_RW;
1558 else
1559 reg &= ~ARLTBL_RW;
1560 if (dev->vlan_enabled)
1561 reg &= ~ARLTBL_IVL_SVL_SELECT;
1562 else
1563 reg |= ARLTBL_IVL_SVL_SELECT;
1564 b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
1565
1566 return b53_arl_op_wait(dev);
1567}
1568
1569static int b53_arl_read(struct b53_device *dev, u64 mac,
1570 u16 vid, struct b53_arl_entry *ent, u8 *idx)
1571{
1572 DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
1573 unsigned int i;
1574 int ret;
1575
1576 ret = b53_arl_op_wait(dev);
1577 if (ret)
1578 return ret;
1579
1580 bitmap_zero(free_bins, dev->num_arl_bins);
1581
1582 /* Read the bins */
1583 for (i = 0; i < dev->num_arl_bins; i++) {
1584 u64 mac_vid;
1585 u32 fwd_entry;
1586
1587 b53_read64(dev, B53_ARLIO_PAGE,
1588 B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
1589 b53_read32(dev, B53_ARLIO_PAGE,
1590 B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
1591 b53_arl_to_entry(ent, mac_vid, fwd_entry);
1592
1593 if (!(fwd_entry & ARLTBL_VALID)) {
1594 set_bit(i, free_bins);
1595 continue;
1596 }
1597 if ((mac_vid & ARLTBL_MAC_MASK) != mac)
1598 continue;
1599 if (dev->vlan_enabled &&
1600 ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
1601 continue;
1602 *idx = i;
1603 return 0;
1604 }
1605
1606 *idx = find_first_bit(free_bins, dev->num_arl_bins);
1607 return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
1608}
1609
1610static int b53_arl_op(struct b53_device *dev, int op, int port,
1611 const unsigned char *addr, u16 vid, bool is_valid)
1612{
1613 struct b53_arl_entry ent;
1614 u32 fwd_entry;
1615 u64 mac, mac_vid = 0;
1616 u8 idx = 0;
1617 int ret;
1618
1619 /* Convert the array into a 64-bit MAC */
1620 mac = ether_addr_to_u64(addr);
1621
1622 /* Perform a read for the given MAC and VID */
1623 b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
1624 b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
1625
1626 /* Issue a read operation for this MAC */
1627 ret = b53_arl_rw_op(dev, 1);
1628 if (ret)
1629 return ret;
1630
1631 ret = b53_arl_read(dev, mac, vid, &ent, &idx);
1632
1633 /* If this is a read, just finish now */
1634 if (op)
1635 return ret;
1636
1637 switch (ret) {
1638 case -ETIMEDOUT:
1639 return ret;
1640 case -ENOSPC:
1641 dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
1642 addr, vid);
1643 return is_valid ? ret : 0;
1644 case -ENOENT:
1645 /* We could not find a matching MAC, so reset to a new entry */
1646 dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
1647 addr, vid, idx);
1648 fwd_entry = 0;
1649 break;
1650 default:
1651 dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
1652 addr, vid, idx);
1653 break;
1654 }
1655
1656 /* For multicast address, the port is a bitmask and the validity
1657 * is determined by having at least one port being still active
1658 */
1659 if (!is_multicast_ether_addr(addr)) {
1660 ent.port = port;
1661 ent.is_valid = is_valid;
1662 } else {
1663 if (is_valid)
1664 ent.port |= BIT(port);
1665 else
1666 ent.port &= ~BIT(port);
1667
1668 ent.is_valid = !!(ent.port);
1669 }
1670
1671 ent.vid = vid;
1672 ent.is_static = true;
1673 ent.is_age = false;
1674 memcpy(ent.mac, addr, ETH_ALEN);
1675 b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
1676
1677 b53_write64(dev, B53_ARLIO_PAGE,
1678 B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
1679 b53_write32(dev, B53_ARLIO_PAGE,
1680 B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
1681
1682 return b53_arl_rw_op(dev, 0);
1683}
1684
1685int b53_fdb_add(struct dsa_switch *ds, int port,
1686 const unsigned char *addr, u16 vid,
1687 struct dsa_db db)
1688{
1689 struct b53_device *priv = ds->priv;
1690 int ret;
1691
1692 /* 5325 and 5365 require some more massaging, but could
1693 * be supported eventually
1694 */
1695 if (is5325(priv) || is5365(priv))
1696 return -EOPNOTSUPP;
1697
1698 mutex_lock(&priv->arl_mutex);
1699 ret = b53_arl_op(priv, 0, port, addr, vid, true);
1700 mutex_unlock(&priv->arl_mutex);
1701
1702 return ret;
1703}
1704EXPORT_SYMBOL(b53_fdb_add);
1705
1706int b53_fdb_del(struct dsa_switch *ds, int port,
1707 const unsigned char *addr, u16 vid,
1708 struct dsa_db db)
1709{
1710 struct b53_device *priv = ds->priv;
1711 int ret;
1712
1713 mutex_lock(&priv->arl_mutex);
1714 ret = b53_arl_op(priv, 0, port, addr, vid, false);
1715 mutex_unlock(&priv->arl_mutex);
1716
1717 return ret;
1718}
1719EXPORT_SYMBOL(b53_fdb_del);
1720
1721static int b53_arl_search_wait(struct b53_device *dev)
1722{
1723 unsigned int timeout = 1000;
1724 u8 reg;
1725
1726 do {
1727 b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, ®);
1728 if (!(reg & ARL_SRCH_STDN))
1729 return 0;
1730
1731 if (reg & ARL_SRCH_VLID)
1732 return 0;
1733
1734 usleep_range(1000, 2000);
1735 } while (timeout--);
1736
1737 return -ETIMEDOUT;
1738}
1739
1740static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
1741 struct b53_arl_entry *ent)
1742{
1743 u64 mac_vid;
1744 u32 fwd_entry;
1745
1746 b53_read64(dev, B53_ARLIO_PAGE,
1747 B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
1748 b53_read32(dev, B53_ARLIO_PAGE,
1749 B53_ARL_SRCH_RSTL(idx), &fwd_entry);
1750 b53_arl_to_entry(ent, mac_vid, fwd_entry);
1751}
1752
1753static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
1754 dsa_fdb_dump_cb_t *cb, void *data)
1755{
1756 if (!ent->is_valid)
1757 return 0;
1758
1759 if (port != ent->port)
1760 return 0;
1761
1762 return cb(ent->mac, ent->vid, ent->is_static, data);
1763}
1764
1765int b53_fdb_dump(struct dsa_switch *ds, int port,
1766 dsa_fdb_dump_cb_t *cb, void *data)
1767{
1768 struct b53_device *priv = ds->priv;
1769 struct b53_arl_entry results[2];
1770 unsigned int count = 0;
1771 int ret;
1772 u8 reg;
1773
1774 mutex_lock(&priv->arl_mutex);
1775
1776 /* Start search operation */
1777 reg = ARL_SRCH_STDN;
1778 b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
1779
1780 do {
1781 ret = b53_arl_search_wait(priv);
1782 if (ret)
1783 break;
1784
1785 b53_arl_search_rd(priv, 0, &results[0]);
1786 ret = b53_fdb_copy(port, &results[0], cb, data);
1787 if (ret)
1788 break;
1789
1790 if (priv->num_arl_bins > 2) {
1791 b53_arl_search_rd(priv, 1, &results[1]);
1792 ret = b53_fdb_copy(port, &results[1], cb, data);
1793 if (ret)
1794 break;
1795
1796 if (!results[0].is_valid && !results[1].is_valid)
1797 break;
1798 }
1799
1800 } while (count++ < b53_max_arl_entries(priv) / 2);
1801
1802 mutex_unlock(&priv->arl_mutex);
1803
1804 return 0;
1805}
1806EXPORT_SYMBOL(b53_fdb_dump);
1807
1808int b53_mdb_add(struct dsa_switch *ds, int port,
1809 const struct switchdev_obj_port_mdb *mdb,
1810 struct dsa_db db)
1811{
1812 struct b53_device *priv = ds->priv;
1813 int ret;
1814
1815 /* 5325 and 5365 require some more massaging, but could
1816 * be supported eventually
1817 */
1818 if (is5325(priv) || is5365(priv))
1819 return -EOPNOTSUPP;
1820
1821 mutex_lock(&priv->arl_mutex);
1822 ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, true);
1823 mutex_unlock(&priv->arl_mutex);
1824
1825 return ret;
1826}
1827EXPORT_SYMBOL(b53_mdb_add);
1828
1829int b53_mdb_del(struct dsa_switch *ds, int port,
1830 const struct switchdev_obj_port_mdb *mdb,
1831 struct dsa_db db)
1832{
1833 struct b53_device *priv = ds->priv;
1834 int ret;
1835
1836 mutex_lock(&priv->arl_mutex);
1837 ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, false);
1838 mutex_unlock(&priv->arl_mutex);
1839 if (ret)
1840 dev_err(ds->dev, "failed to delete MDB entry\n");
1841
1842 return ret;
1843}
1844EXPORT_SYMBOL(b53_mdb_del);
1845
1846int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
1847 bool *tx_fwd_offload, struct netlink_ext_ack *extack)
1848{
1849 struct b53_device *dev = ds->priv;
1850 s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1851 u16 pvlan, reg;
1852 unsigned int i;
1853
1854 /* On 7278, port 7 which connects to the ASP should only receive
1855 * traffic from matching CFP rules.
1856 */
1857 if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
1858 return -EINVAL;
1859
1860 /* Make this port leave the all VLANs join since we will have proper
1861 * VLAN entries from now on
1862 */
1863 if (is58xx(dev)) {
1864 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®);
1865 reg &= ~BIT(port);
1866 if ((reg & BIT(cpu_port)) == BIT(cpu_port))
1867 reg &= ~BIT(cpu_port);
1868 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1869 }
1870
1871 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1872
1873 b53_for_each_port(dev, i) {
1874 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1875 continue;
1876
1877 /* Add this local port to the remote port VLAN control
1878 * membership and update the remote port bitmask
1879 */
1880 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®);
1881 reg |= BIT(port);
1882 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1883 dev->ports[i].vlan_ctl_mask = reg;
1884
1885 pvlan |= BIT(i);
1886 }
1887
1888 /* Configure the local port VLAN control membership to include
1889 * remote ports and update the local port bitmask
1890 */
1891 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1892 dev->ports[port].vlan_ctl_mask = pvlan;
1893
1894 return 0;
1895}
1896EXPORT_SYMBOL(b53_br_join);
1897
1898void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge)
1899{
1900 struct b53_device *dev = ds->priv;
1901 struct b53_vlan *vl = &dev->vlans[0];
1902 s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1903 unsigned int i;
1904 u16 pvlan, reg, pvid;
1905
1906 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1907
1908 b53_for_each_port(dev, i) {
1909 /* Don't touch the remaining ports */
1910 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1911 continue;
1912
1913 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®);
1914 reg &= ~BIT(port);
1915 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1916 dev->ports[port].vlan_ctl_mask = reg;
1917
1918 /* Prevent self removal to preserve isolation */
1919 if (port != i)
1920 pvlan &= ~BIT(i);
1921 }
1922
1923 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1924 dev->ports[port].vlan_ctl_mask = pvlan;
1925
1926 pvid = b53_default_pvid(dev);
1927
1928 /* Make this port join all VLANs without VLAN entries */
1929 if (is58xx(dev)) {
1930 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®);
1931 reg |= BIT(port);
1932 if (!(reg & BIT(cpu_port)))
1933 reg |= BIT(cpu_port);
1934 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1935 } else {
1936 b53_get_vlan_entry(dev, pvid, vl);
1937 vl->members |= BIT(port) | BIT(cpu_port);
1938 vl->untag |= BIT(port) | BIT(cpu_port);
1939 b53_set_vlan_entry(dev, pvid, vl);
1940 }
1941}
1942EXPORT_SYMBOL(b53_br_leave);
1943
1944void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
1945{
1946 struct b53_device *dev = ds->priv;
1947 u8 hw_state;
1948 u8 reg;
1949
1950 switch (state) {
1951 case BR_STATE_DISABLED:
1952 hw_state = PORT_CTRL_DIS_STATE;
1953 break;
1954 case BR_STATE_LISTENING:
1955 hw_state = PORT_CTRL_LISTEN_STATE;
1956 break;
1957 case BR_STATE_LEARNING:
1958 hw_state = PORT_CTRL_LEARN_STATE;
1959 break;
1960 case BR_STATE_FORWARDING:
1961 hw_state = PORT_CTRL_FWD_STATE;
1962 break;
1963 case BR_STATE_BLOCKING:
1964 hw_state = PORT_CTRL_BLOCK_STATE;
1965 break;
1966 default:
1967 dev_err(ds->dev, "invalid STP state: %d\n", state);
1968 return;
1969 }
1970
1971 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®);
1972 reg &= ~PORT_CTRL_STP_STATE_MASK;
1973 reg |= hw_state;
1974 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
1975}
1976EXPORT_SYMBOL(b53_br_set_stp_state);
1977
1978void b53_br_fast_age(struct dsa_switch *ds, int port)
1979{
1980 struct b53_device *dev = ds->priv;
1981
1982 if (b53_fast_age_port(dev, port))
1983 dev_err(ds->dev, "fast ageing failed\n");
1984}
1985EXPORT_SYMBOL(b53_br_fast_age);
1986
1987int b53_br_flags_pre(struct dsa_switch *ds, int port,
1988 struct switchdev_brport_flags flags,
1989 struct netlink_ext_ack *extack)
1990{
1991 if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING))
1992 return -EINVAL;
1993
1994 return 0;
1995}
1996EXPORT_SYMBOL(b53_br_flags_pre);
1997
1998int b53_br_flags(struct dsa_switch *ds, int port,
1999 struct switchdev_brport_flags flags,
2000 struct netlink_ext_ack *extack)
2001{
2002 if (flags.mask & BR_FLOOD)
2003 b53_port_set_ucast_flood(ds->priv, port,
2004 !!(flags.val & BR_FLOOD));
2005 if (flags.mask & BR_MCAST_FLOOD)
2006 b53_port_set_mcast_flood(ds->priv, port,
2007 !!(flags.val & BR_MCAST_FLOOD));
2008 if (flags.mask & BR_LEARNING)
2009 b53_port_set_learning(ds->priv, port,
2010 !!(flags.val & BR_LEARNING));
2011
2012 return 0;
2013}
2014EXPORT_SYMBOL(b53_br_flags);
2015
2016static bool b53_possible_cpu_port(struct dsa_switch *ds, int port)
2017{
2018 /* Broadcom switches will accept enabling Broadcom tags on the
2019 * following ports: 5, 7 and 8, any other port is not supported
2020 */
2021 switch (port) {
2022 case B53_CPU_PORT_25:
2023 case 7:
2024 case B53_CPU_PORT:
2025 return true;
2026 }
2027
2028 return false;
2029}
2030
2031static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port,
2032 enum dsa_tag_protocol tag_protocol)
2033{
2034 bool ret = b53_possible_cpu_port(ds, port);
2035
2036 if (!ret) {
2037 dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n",
2038 port);
2039 return ret;
2040 }
2041
2042 switch (tag_protocol) {
2043 case DSA_TAG_PROTO_BRCM:
2044 case DSA_TAG_PROTO_BRCM_PREPEND:
2045 dev_warn(ds->dev,
2046 "Port %d is stacked to Broadcom tag switch\n", port);
2047 ret = false;
2048 break;
2049 default:
2050 ret = true;
2051 break;
2052 }
2053
2054 return ret;
2055}
2056
2057enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
2058 enum dsa_tag_protocol mprot)
2059{
2060 struct b53_device *dev = ds->priv;
2061
2062 if (!b53_can_enable_brcm_tags(ds, port, mprot)) {
2063 dev->tag_protocol = DSA_TAG_PROTO_NONE;
2064 goto out;
2065 }
2066
2067 /* Older models require a different 6 byte tag */
2068 if (is5325(dev) || is5365(dev) || is63xx(dev)) {
2069 dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
2070 goto out;
2071 }
2072
2073 /* Broadcom BCM58xx chips have a flow accelerator on Port 8
2074 * which requires us to use the prepended Broadcom tag type
2075 */
2076 if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) {
2077 dev->tag_protocol = DSA_TAG_PROTO_BRCM_PREPEND;
2078 goto out;
2079 }
2080
2081 dev->tag_protocol = DSA_TAG_PROTO_BRCM;
2082out:
2083 return dev->tag_protocol;
2084}
2085EXPORT_SYMBOL(b53_get_tag_protocol);
2086
2087int b53_mirror_add(struct dsa_switch *ds, int port,
2088 struct dsa_mall_mirror_tc_entry *mirror, bool ingress,
2089 struct netlink_ext_ack *extack)
2090{
2091 struct b53_device *dev = ds->priv;
2092 u16 reg, loc;
2093
2094 if (ingress)
2095 loc = B53_IG_MIR_CTL;
2096 else
2097 loc = B53_EG_MIR_CTL;
2098
2099 b53_read16(dev, B53_MGMT_PAGE, loc, ®);
2100 reg |= BIT(port);
2101 b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2102
2103 b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®);
2104 reg &= ~CAP_PORT_MASK;
2105 reg |= mirror->to_local_port;
2106 reg |= MIRROR_EN;
2107 b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2108
2109 return 0;
2110}
2111EXPORT_SYMBOL(b53_mirror_add);
2112
2113void b53_mirror_del(struct dsa_switch *ds, int port,
2114 struct dsa_mall_mirror_tc_entry *mirror)
2115{
2116 struct b53_device *dev = ds->priv;
2117 bool loc_disable = false, other_loc_disable = false;
2118 u16 reg, loc;
2119
2120 if (mirror->ingress)
2121 loc = B53_IG_MIR_CTL;
2122 else
2123 loc = B53_EG_MIR_CTL;
2124
2125 /* Update the desired ingress/egress register */
2126 b53_read16(dev, B53_MGMT_PAGE, loc, ®);
2127 reg &= ~BIT(port);
2128 if (!(reg & MIRROR_MASK))
2129 loc_disable = true;
2130 b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2131
2132 /* Now look at the other one to know if we can disable mirroring
2133 * entirely
2134 */
2135 if (mirror->ingress)
2136 b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, ®);
2137 else
2138 b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, ®);
2139 if (!(reg & MIRROR_MASK))
2140 other_loc_disable = true;
2141
2142 b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®);
2143 /* Both no longer have ports, let's disable mirroring */
2144 if (loc_disable && other_loc_disable) {
2145 reg &= ~MIRROR_EN;
2146 reg &= ~mirror->to_local_port;
2147 }
2148 b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2149}
2150EXPORT_SYMBOL(b53_mirror_del);
2151
2152void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
2153{
2154 struct b53_device *dev = ds->priv;
2155 u16 reg;
2156
2157 b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, ®);
2158 if (enable)
2159 reg |= BIT(port);
2160 else
2161 reg &= ~BIT(port);
2162 b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
2163}
2164EXPORT_SYMBOL(b53_eee_enable_set);
2165
2166
2167/* Returns 0 if EEE was not enabled, or 1 otherwise
2168 */
2169int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
2170{
2171 int ret;
2172
2173 ret = phy_init_eee(phy, false);
2174 if (ret)
2175 return 0;
2176
2177 b53_eee_enable_set(ds, port, true);
2178
2179 return 1;
2180}
2181EXPORT_SYMBOL(b53_eee_init);
2182
2183int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
2184{
2185 struct b53_device *dev = ds->priv;
2186 struct ethtool_eee *p = &dev->ports[port].eee;
2187 u16 reg;
2188
2189 if (is5325(dev) || is5365(dev))
2190 return -EOPNOTSUPP;
2191
2192 b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, ®);
2193 e->eee_enabled = p->eee_enabled;
2194 e->eee_active = !!(reg & BIT(port));
2195
2196 return 0;
2197}
2198EXPORT_SYMBOL(b53_get_mac_eee);
2199
2200int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
2201{
2202 struct b53_device *dev = ds->priv;
2203 struct ethtool_eee *p = &dev->ports[port].eee;
2204
2205 if (is5325(dev) || is5365(dev))
2206 return -EOPNOTSUPP;
2207
2208 p->eee_enabled = e->eee_enabled;
2209 b53_eee_enable_set(ds, port, e->eee_enabled);
2210
2211 return 0;
2212}
2213EXPORT_SYMBOL(b53_set_mac_eee);
2214
2215static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
2216{
2217 struct b53_device *dev = ds->priv;
2218 bool enable_jumbo;
2219 bool allow_10_100;
2220
2221 if (is5325(dev) || is5365(dev))
2222 return -EOPNOTSUPP;
2223
2224 enable_jumbo = (mtu >= JMS_MIN_SIZE);
2225 allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID);
2226
2227 return b53_set_jumbo(dev, enable_jumbo, allow_10_100);
2228}
2229
2230static int b53_get_max_mtu(struct dsa_switch *ds, int port)
2231{
2232 return JMS_MAX_SIZE;
2233}
2234
2235static const struct dsa_switch_ops b53_switch_ops = {
2236 .get_tag_protocol = b53_get_tag_protocol,
2237 .setup = b53_setup,
2238 .teardown = b53_teardown,
2239 .get_strings = b53_get_strings,
2240 .get_ethtool_stats = b53_get_ethtool_stats,
2241 .get_sset_count = b53_get_sset_count,
2242 .get_ethtool_phy_stats = b53_get_ethtool_phy_stats,
2243 .phy_read = b53_phy_read16,
2244 .phy_write = b53_phy_write16,
2245 .adjust_link = b53_adjust_link,
2246 .phylink_get_caps = b53_phylink_get_caps,
2247 .phylink_mac_select_pcs = b53_phylink_mac_select_pcs,
2248 .phylink_mac_config = b53_phylink_mac_config,
2249 .phylink_mac_link_down = b53_phylink_mac_link_down,
2250 .phylink_mac_link_up = b53_phylink_mac_link_up,
2251 .port_enable = b53_enable_port,
2252 .port_disable = b53_disable_port,
2253 .get_mac_eee = b53_get_mac_eee,
2254 .set_mac_eee = b53_set_mac_eee,
2255 .port_bridge_join = b53_br_join,
2256 .port_bridge_leave = b53_br_leave,
2257 .port_pre_bridge_flags = b53_br_flags_pre,
2258 .port_bridge_flags = b53_br_flags,
2259 .port_stp_state_set = b53_br_set_stp_state,
2260 .port_fast_age = b53_br_fast_age,
2261 .port_vlan_filtering = b53_vlan_filtering,
2262 .port_vlan_add = b53_vlan_add,
2263 .port_vlan_del = b53_vlan_del,
2264 .port_fdb_dump = b53_fdb_dump,
2265 .port_fdb_add = b53_fdb_add,
2266 .port_fdb_del = b53_fdb_del,
2267 .port_mirror_add = b53_mirror_add,
2268 .port_mirror_del = b53_mirror_del,
2269 .port_mdb_add = b53_mdb_add,
2270 .port_mdb_del = b53_mdb_del,
2271 .port_max_mtu = b53_get_max_mtu,
2272 .port_change_mtu = b53_change_mtu,
2273};
2274
2275struct b53_chip_data {
2276 u32 chip_id;
2277 const char *dev_name;
2278 u16 vlans;
2279 u16 enabled_ports;
2280 u8 imp_port;
2281 u8 cpu_port;
2282 u8 vta_regs[3];
2283 u8 arl_bins;
2284 u16 arl_buckets;
2285 u8 duplex_reg;
2286 u8 jumbo_pm_reg;
2287 u8 jumbo_size_reg;
2288};
2289
2290#define B53_VTA_REGS \
2291 { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
2292#define B53_VTA_REGS_9798 \
2293 { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
2294#define B53_VTA_REGS_63XX \
2295 { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
2296
2297static const struct b53_chip_data b53_switch_chips[] = {
2298 {
2299 .chip_id = BCM5325_DEVICE_ID,
2300 .dev_name = "BCM5325",
2301 .vlans = 16,
2302 .enabled_ports = 0x3f,
2303 .arl_bins = 2,
2304 .arl_buckets = 1024,
2305 .imp_port = 5,
2306 .duplex_reg = B53_DUPLEX_STAT_FE,
2307 },
2308 {
2309 .chip_id = BCM5365_DEVICE_ID,
2310 .dev_name = "BCM5365",
2311 .vlans = 256,
2312 .enabled_ports = 0x3f,
2313 .arl_bins = 2,
2314 .arl_buckets = 1024,
2315 .imp_port = 5,
2316 .duplex_reg = B53_DUPLEX_STAT_FE,
2317 },
2318 {
2319 .chip_id = BCM5389_DEVICE_ID,
2320 .dev_name = "BCM5389",
2321 .vlans = 4096,
2322 .enabled_ports = 0x11f,
2323 .arl_bins = 4,
2324 .arl_buckets = 1024,
2325 .imp_port = 8,
2326 .vta_regs = B53_VTA_REGS,
2327 .duplex_reg = B53_DUPLEX_STAT_GE,
2328 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2329 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2330 },
2331 {
2332 .chip_id = BCM5395_DEVICE_ID,
2333 .dev_name = "BCM5395",
2334 .vlans = 4096,
2335 .enabled_ports = 0x11f,
2336 .arl_bins = 4,
2337 .arl_buckets = 1024,
2338 .imp_port = 8,
2339 .vta_regs = B53_VTA_REGS,
2340 .duplex_reg = B53_DUPLEX_STAT_GE,
2341 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2342 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2343 },
2344 {
2345 .chip_id = BCM5397_DEVICE_ID,
2346 .dev_name = "BCM5397",
2347 .vlans = 4096,
2348 .enabled_ports = 0x11f,
2349 .arl_bins = 4,
2350 .arl_buckets = 1024,
2351 .imp_port = 8,
2352 .vta_regs = B53_VTA_REGS_9798,
2353 .duplex_reg = B53_DUPLEX_STAT_GE,
2354 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2355 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2356 },
2357 {
2358 .chip_id = BCM5398_DEVICE_ID,
2359 .dev_name = "BCM5398",
2360 .vlans = 4096,
2361 .enabled_ports = 0x17f,
2362 .arl_bins = 4,
2363 .arl_buckets = 1024,
2364 .imp_port = 8,
2365 .vta_regs = B53_VTA_REGS_9798,
2366 .duplex_reg = B53_DUPLEX_STAT_GE,
2367 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2368 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2369 },
2370 {
2371 .chip_id = BCM53115_DEVICE_ID,
2372 .dev_name = "BCM53115",
2373 .vlans = 4096,
2374 .enabled_ports = 0x11f,
2375 .arl_bins = 4,
2376 .arl_buckets = 1024,
2377 .vta_regs = B53_VTA_REGS,
2378 .imp_port = 8,
2379 .duplex_reg = B53_DUPLEX_STAT_GE,
2380 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2381 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2382 },
2383 {
2384 .chip_id = BCM53125_DEVICE_ID,
2385 .dev_name = "BCM53125",
2386 .vlans = 4096,
2387 .enabled_ports = 0x1ff,
2388 .arl_bins = 4,
2389 .arl_buckets = 1024,
2390 .imp_port = 8,
2391 .vta_regs = B53_VTA_REGS,
2392 .duplex_reg = B53_DUPLEX_STAT_GE,
2393 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2394 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2395 },
2396 {
2397 .chip_id = BCM53128_DEVICE_ID,
2398 .dev_name = "BCM53128",
2399 .vlans = 4096,
2400 .enabled_ports = 0x1ff,
2401 .arl_bins = 4,
2402 .arl_buckets = 1024,
2403 .imp_port = 8,
2404 .vta_regs = B53_VTA_REGS,
2405 .duplex_reg = B53_DUPLEX_STAT_GE,
2406 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2407 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2408 },
2409 {
2410 .chip_id = BCM63XX_DEVICE_ID,
2411 .dev_name = "BCM63xx",
2412 .vlans = 4096,
2413 .enabled_ports = 0, /* pdata must provide them */
2414 .arl_bins = 4,
2415 .arl_buckets = 1024,
2416 .imp_port = 8,
2417 .vta_regs = B53_VTA_REGS_63XX,
2418 .duplex_reg = B53_DUPLEX_STAT_63XX,
2419 .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
2420 .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
2421 },
2422 {
2423 .chip_id = BCM53010_DEVICE_ID,
2424 .dev_name = "BCM53010",
2425 .vlans = 4096,
2426 .enabled_ports = 0x1bf,
2427 .arl_bins = 4,
2428 .arl_buckets = 1024,
2429 .imp_port = 8,
2430 .vta_regs = B53_VTA_REGS,
2431 .duplex_reg = B53_DUPLEX_STAT_GE,
2432 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2433 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2434 },
2435 {
2436 .chip_id = BCM53011_DEVICE_ID,
2437 .dev_name = "BCM53011",
2438 .vlans = 4096,
2439 .enabled_ports = 0x1bf,
2440 .arl_bins = 4,
2441 .arl_buckets = 1024,
2442 .imp_port = 8,
2443 .vta_regs = B53_VTA_REGS,
2444 .duplex_reg = B53_DUPLEX_STAT_GE,
2445 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2446 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2447 },
2448 {
2449 .chip_id = BCM53012_DEVICE_ID,
2450 .dev_name = "BCM53012",
2451 .vlans = 4096,
2452 .enabled_ports = 0x1bf,
2453 .arl_bins = 4,
2454 .arl_buckets = 1024,
2455 .imp_port = 8,
2456 .vta_regs = B53_VTA_REGS,
2457 .duplex_reg = B53_DUPLEX_STAT_GE,
2458 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2459 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2460 },
2461 {
2462 .chip_id = BCM53018_DEVICE_ID,
2463 .dev_name = "BCM53018",
2464 .vlans = 4096,
2465 .enabled_ports = 0x1bf,
2466 .arl_bins = 4,
2467 .arl_buckets = 1024,
2468 .imp_port = 8,
2469 .vta_regs = B53_VTA_REGS,
2470 .duplex_reg = B53_DUPLEX_STAT_GE,
2471 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2472 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2473 },
2474 {
2475 .chip_id = BCM53019_DEVICE_ID,
2476 .dev_name = "BCM53019",
2477 .vlans = 4096,
2478 .enabled_ports = 0x1bf,
2479 .arl_bins = 4,
2480 .arl_buckets = 1024,
2481 .imp_port = 8,
2482 .vta_regs = B53_VTA_REGS,
2483 .duplex_reg = B53_DUPLEX_STAT_GE,
2484 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2485 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2486 },
2487 {
2488 .chip_id = BCM58XX_DEVICE_ID,
2489 .dev_name = "BCM585xx/586xx/88312",
2490 .vlans = 4096,
2491 .enabled_ports = 0x1ff,
2492 .arl_bins = 4,
2493 .arl_buckets = 1024,
2494 .imp_port = 8,
2495 .vta_regs = B53_VTA_REGS,
2496 .duplex_reg = B53_DUPLEX_STAT_GE,
2497 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2498 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2499 },
2500 {
2501 .chip_id = BCM583XX_DEVICE_ID,
2502 .dev_name = "BCM583xx/11360",
2503 .vlans = 4096,
2504 .enabled_ports = 0x103,
2505 .arl_bins = 4,
2506 .arl_buckets = 1024,
2507 .imp_port = 8,
2508 .vta_regs = B53_VTA_REGS,
2509 .duplex_reg = B53_DUPLEX_STAT_GE,
2510 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2511 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2512 },
2513 /* Starfighter 2 */
2514 {
2515 .chip_id = BCM4908_DEVICE_ID,
2516 .dev_name = "BCM4908",
2517 .vlans = 4096,
2518 .enabled_ports = 0x1bf,
2519 .arl_bins = 4,
2520 .arl_buckets = 256,
2521 .imp_port = 8,
2522 .vta_regs = B53_VTA_REGS,
2523 .duplex_reg = B53_DUPLEX_STAT_GE,
2524 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2525 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2526 },
2527 {
2528 .chip_id = BCM7445_DEVICE_ID,
2529 .dev_name = "BCM7445",
2530 .vlans = 4096,
2531 .enabled_ports = 0x1ff,
2532 .arl_bins = 4,
2533 .arl_buckets = 1024,
2534 .imp_port = 8,
2535 .vta_regs = B53_VTA_REGS,
2536 .duplex_reg = B53_DUPLEX_STAT_GE,
2537 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2538 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2539 },
2540 {
2541 .chip_id = BCM7278_DEVICE_ID,
2542 .dev_name = "BCM7278",
2543 .vlans = 4096,
2544 .enabled_ports = 0x1ff,
2545 .arl_bins = 4,
2546 .arl_buckets = 256,
2547 .imp_port = 8,
2548 .vta_regs = B53_VTA_REGS,
2549 .duplex_reg = B53_DUPLEX_STAT_GE,
2550 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2551 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2552 },
2553};
2554
2555static int b53_switch_init(struct b53_device *dev)
2556{
2557 unsigned int i;
2558 int ret;
2559
2560 for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
2561 const struct b53_chip_data *chip = &b53_switch_chips[i];
2562
2563 if (chip->chip_id == dev->chip_id) {
2564 if (!dev->enabled_ports)
2565 dev->enabled_ports = chip->enabled_ports;
2566 dev->name = chip->dev_name;
2567 dev->duplex_reg = chip->duplex_reg;
2568 dev->vta_regs[0] = chip->vta_regs[0];
2569 dev->vta_regs[1] = chip->vta_regs[1];
2570 dev->vta_regs[2] = chip->vta_regs[2];
2571 dev->jumbo_pm_reg = chip->jumbo_pm_reg;
2572 dev->imp_port = chip->imp_port;
2573 dev->num_vlans = chip->vlans;
2574 dev->num_arl_bins = chip->arl_bins;
2575 dev->num_arl_buckets = chip->arl_buckets;
2576 break;
2577 }
2578 }
2579
2580 /* check which BCM5325x version we have */
2581 if (is5325(dev)) {
2582 u8 vc4;
2583
2584 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
2585
2586 /* check reserved bits */
2587 switch (vc4 & 3) {
2588 case 1:
2589 /* BCM5325E */
2590 break;
2591 case 3:
2592 /* BCM5325F - do not use port 4 */
2593 dev->enabled_ports &= ~BIT(4);
2594 break;
2595 default:
2596/* On the BCM47XX SoCs this is the supported internal switch.*/
2597#ifndef CONFIG_BCM47XX
2598 /* BCM5325M */
2599 return -EINVAL;
2600#else
2601 break;
2602#endif
2603 }
2604 }
2605
2606 dev->num_ports = fls(dev->enabled_ports);
2607
2608 dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
2609
2610 /* Include non standard CPU port built-in PHYs to be probed */
2611 if (is539x(dev) || is531x5(dev)) {
2612 for (i = 0; i < dev->num_ports; i++) {
2613 if (!(dev->ds->phys_mii_mask & BIT(i)) &&
2614 !b53_possible_cpu_port(dev->ds, i))
2615 dev->ds->phys_mii_mask |= BIT(i);
2616 }
2617 }
2618
2619 dev->ports = devm_kcalloc(dev->dev,
2620 dev->num_ports, sizeof(struct b53_port),
2621 GFP_KERNEL);
2622 if (!dev->ports)
2623 return -ENOMEM;
2624
2625 dev->vlans = devm_kcalloc(dev->dev,
2626 dev->num_vlans, sizeof(struct b53_vlan),
2627 GFP_KERNEL);
2628 if (!dev->vlans)
2629 return -ENOMEM;
2630
2631 dev->reset_gpio = b53_switch_get_reset_gpio(dev);
2632 if (dev->reset_gpio >= 0) {
2633 ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
2634 GPIOF_OUT_INIT_HIGH, "robo_reset");
2635 if (ret)
2636 return ret;
2637 }
2638
2639 return 0;
2640}
2641
2642struct b53_device *b53_switch_alloc(struct device *base,
2643 const struct b53_io_ops *ops,
2644 void *priv)
2645{
2646 struct dsa_switch *ds;
2647 struct b53_device *dev;
2648
2649 ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
2650 if (!ds)
2651 return NULL;
2652
2653 ds->dev = base;
2654
2655 dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
2656 if (!dev)
2657 return NULL;
2658
2659 ds->priv = dev;
2660 dev->dev = base;
2661
2662 dev->ds = ds;
2663 dev->priv = priv;
2664 dev->ops = ops;
2665 ds->ops = &b53_switch_ops;
2666 dev->vlan_enabled = true;
2667 /* Let DSA handle the case were multiple bridges span the same switch
2668 * device and different VLAN awareness settings are requested, which
2669 * would be breaking filtering semantics for any of the other bridge
2670 * devices. (not hardware supported)
2671 */
2672 ds->vlan_filtering_is_global = true;
2673
2674 mutex_init(&dev->reg_mutex);
2675 mutex_init(&dev->stats_mutex);
2676 mutex_init(&dev->arl_mutex);
2677
2678 return dev;
2679}
2680EXPORT_SYMBOL(b53_switch_alloc);
2681
2682int b53_switch_detect(struct b53_device *dev)
2683{
2684 u32 id32;
2685 u16 tmp;
2686 u8 id8;
2687 int ret;
2688
2689 ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
2690 if (ret)
2691 return ret;
2692
2693 switch (id8) {
2694 case 0:
2695 /* BCM5325 and BCM5365 do not have this register so reads
2696 * return 0. But the read operation did succeed, so assume this
2697 * is one of them.
2698 *
2699 * Next check if we can write to the 5325's VTA register; for
2700 * 5365 it is read only.
2701 */
2702 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
2703 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
2704
2705 if (tmp == 0xf)
2706 dev->chip_id = BCM5325_DEVICE_ID;
2707 else
2708 dev->chip_id = BCM5365_DEVICE_ID;
2709 break;
2710 case BCM5389_DEVICE_ID:
2711 case BCM5395_DEVICE_ID:
2712 case BCM5397_DEVICE_ID:
2713 case BCM5398_DEVICE_ID:
2714 dev->chip_id = id8;
2715 break;
2716 default:
2717 ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
2718 if (ret)
2719 return ret;
2720
2721 switch (id32) {
2722 case BCM53115_DEVICE_ID:
2723 case BCM53125_DEVICE_ID:
2724 case BCM53128_DEVICE_ID:
2725 case BCM53010_DEVICE_ID:
2726 case BCM53011_DEVICE_ID:
2727 case BCM53012_DEVICE_ID:
2728 case BCM53018_DEVICE_ID:
2729 case BCM53019_DEVICE_ID:
2730 dev->chip_id = id32;
2731 break;
2732 default:
2733 dev_err(dev->dev,
2734 "unsupported switch detected (BCM53%02x/BCM%x)\n",
2735 id8, id32);
2736 return -ENODEV;
2737 }
2738 }
2739
2740 if (dev->chip_id == BCM5325_DEVICE_ID)
2741 return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
2742 &dev->core_rev);
2743 else
2744 return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
2745 &dev->core_rev);
2746}
2747EXPORT_SYMBOL(b53_switch_detect);
2748
2749int b53_switch_register(struct b53_device *dev)
2750{
2751 int ret;
2752
2753 if (dev->pdata) {
2754 dev->chip_id = dev->pdata->chip_id;
2755 dev->enabled_ports = dev->pdata->enabled_ports;
2756 }
2757
2758 if (!dev->chip_id && b53_switch_detect(dev))
2759 return -EINVAL;
2760
2761 ret = b53_switch_init(dev);
2762 if (ret)
2763 return ret;
2764
2765 dev_info(dev->dev, "found switch: %s, rev %i\n",
2766 dev->name, dev->core_rev);
2767
2768 return dsa_register_switch(dev->ds);
2769}
2770EXPORT_SYMBOL(b53_switch_register);
2771
2772MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
2773MODULE_DESCRIPTION("B53 switch library");
2774MODULE_LICENSE("Dual BSD/GPL");